SC Application For Hull Identification Number Watercraft
Sc-Application-For-Hull-Identification-Number-For-Watercraft SC-Application-For-Hull-Identification-Number-For-Watercraft SC-Application-For-Hull-Identification-Number-For-Watercraft s muddybay
2014-04-10
: Sc Application For Hull Identification Number For Watercraft SC_Application_For_Hull_Identification_Number_For_Watercraft registration-forms resources
Open the PDF directly: View PDF .
Page Count: 2
Download | |
Open PDF In Browser | View PDF |
PRINT IN INK (See back for instructions) NOTE: Return this form with completed Watercraft/Motor application S.C. Department of Natural Resources Titling and Registration P.O. Box 167 Columbia, South Carolina 29202 Phone number: 803-734-3857 www.dnr.sc.gov (DO NOT USE THIS SPACE) STATE OF SOUTH CAROLINA ASSIGNED HULL I.D. NUMBER APPLICATION FOR HULL IDENTIFICATION NUMBER FOR WATERCRAFT SCZ DATE ASSIGNED NAME (LAST) (FIRST) (M.I.) CASE FILE NUMBER REASON HULL NUMBER REQUESTED Co-owner ( ( ( STREET, ROUTE, OR BOX NO. MAILING ADDRESS (CITY) (STATE) TELEPHONE NO. (ZiP CODE) YR. BUILT LENGTH FT. MODEL DEPTH-TRANSOM TO KEEL FT. IN. IN. TYPE VESSEL (CHECK ONE) ) OPEN ( ) CABIN POWERED ( ) HOUSEBOAT ) CABIN SAIL ) SAIL ( ( ( ) PONTOON ) PWC ) OTHER CONSTRUCTION (CHECK ONE) ) WOOD ) STEEL ) ALUMINUM ) ILLEGIBLE ) OLD WATERCRAFT WATERCRAFT PURCHASED FROM DESCRIPTION OF WATERCRAFT ( ( ( ( ( COUNTY MAKE ( ( ( ) HOMEMADE ) UNABLE TO LOCATE ) REBUILT ( ( ( ) FIBERGLASS ) PLASTIC ) INFLATABLE ( NAME ADDRESS CITY, STATE, ZIP DATE PURCHASED WATERCRAFT IS LOCATED AT DIRECTIONS TO LOCATION ) OTHER This is your certificate stating the Hull Identification Number (HIN) that has been assigned to your watercraft. This number must be permanently affixed in two (2) places. (A) The primary HIN in watercraft with transoms must be affixed to the starboard outboard side within two inches of the top of transom, gunwale, or hull/ deck joint, whichever is lowest. On watercraft without transoms or impractical to use transom, to the starboard outboard side of hull, aft, within one foot of the stern and within two inches of the top of the hull side, gunwale or hull/deck joint, whichever is lowest. On catamarans and pontoon boats with replaceable hulls, to the aft crossbeam, within one foot of the starboard hull attachment. (B) The Duplicate HIN must be affixed in an unexposed location on the interior of the boat or beneath a fitting or item of hardware. (C) Each HIN must be carved, burned, stamped, embossed, molded, bonded, or otherwise permanently affixed to the watercraft so that alteration, removal, or replacement would be obvious. Use of a plate must be fastened so that removal would cause scarring or damage to surrounding hull area. HIN characters must be no less than ¼ inch in height and not attached to any removable part. I AGREE TO COMPLY WITH THE STATE AND FEDERAL REQUIREMENTS IN DISPLAYING THE ASSIGNED NUMBERS. I consent to have an examination of the above watercraft by the S.C. Department of Natural Resources. I certify that the watercraft described above meets the U.S. Coast Guard safety standards. AFFIDAVIT OF OWNER APPLICANT’S SIGNATURE DL # CO-OWNER’S SIGNATURE Date 08ad6400 PRINT IN INK INSTRUCTIONS DEFINITION FOR HOMEMADE BOAT: Homemade watercraft means any watercraft that is built by an individual for personal use from raw materials that does not require the assignment of a federal hull identification number by a manufacturer pursuant to federal law. An individual may build or furnish specifications. A copy of the contract, specifications and bill of sale for raw materials must accompany registration and title application. The person furnishing raw materials under a contract may be considered the builder. Every homemade watercraft must be certified as meeting safety standards of the United States Coast Guard before it can be sold by the builder. (See certification on form on reverse side.) A REBUILT OR RECONSTRUCTED WATERCRAFT IN NO EVENT MAY BE CONSTRUED TO BE HOMEMADE. BOAT MUST BE COMPLETED BEFORE APPLICATIONS ARE SUBMITTED INSTRUCTIONS: I. Complete Application for Hull Identification Number in full. Application must be signed. II. Complete Watercraft/Motor Application in full and submit with correct fee. Application must be signed. If you have any questions, see instructions attached to Watercraft/Motor Application. III. Any watercraft that does not have a Hull Identification Number must have completed form and statement why the Hull Identification Number is being requested. IV. Submit pictures of the bow (port-left & starboard-right) transom of boat and of the whole boat. LOCATION WHERE IDENTIFICATION NUMBER SHOULD BE PLACED TRANSOM STARBOARD (right side) PORT (left side)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Instance ID : uuid:c7130399-ce37-436d-941f-2a3f0c02f47a Document ID : adobe:docid:indd:5fee66ad-c5f5-11dd-aa18-f11d248abba4 Rendition Class : proof:pdf Create Date : 2008:12:09 15:19:58-05:00 Modify Date : 2008:12:10 13:54:24-05:00 Metadata Date : 2008:12:10 13:54:24-05:00 Creator Tool : Adobe InDesign CS3 (5.0.2) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 11776 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CS3 (5.0.2)EXIF Metadata provided by EXIF.tools