SC Application For Hull Identification Number Watercraft

Sc-Application-For-Hull-Identification-Number-For-Watercraft SC-Application-For-Hull-Identification-Number-For-Watercraft SC-Application-For-Hull-Identification-Number-For-Watercraft s muddybay

: Sc Application For Hull Identification Number For Watercraft SC_Application_For_Hull_Identification_Number_For_Watercraft registration-forms resources

Open the PDF directly: View PDF .
Page Count: 2

NOTE: Return this form with completed Watercraft/Motor application

PRINT IN INK

(See back for instructions)

S.C. Department of Natural Resources Phone number: 803-734-3857

Titling and Registration www.dnr.sc.gov

P.O. Box 167

Columbia, South Carolina 29202

STATE OF SOUTH CAROLINA

APPLICATION FOR HULL IDENTIFICATION NUMBER FOR WATERCRAF

T

NAME

CO-OWNER

ADDRESS

TELEPHONE NO. COUNTY

MAILING

(DO NOT USE THIS SPACE)

ASSIGNED HULL I.D. NUMBER

SCZ

DATE ASSIGNED

CASE FILE NUMBER

REASON HULL NUMBER REQUESTED

( ) HOMEMADE ( ) ILLEGIBLE

( ) UNABLE TO LOCATE ( ) OLD WATERCRAFT

( ) REBUILT

MAKE YR. BUILT MODEL

LENGTH DEPTH-TRANSOM TO KEEL

FT. IN. FT. IN.

( ) OPEN ( ) CABIN SAIL ( ) PONTOON

( ) CABIN POWERED ( ) SAIL ( ) PWC

( ) HOUSEBOAT ( ) OTHER

DESCRIPTION OF WATERCRAFT

CONSTRUCTION (CHECK ONE)

( ) WOOD ( ) FIBERGLASS ( ) OTHER

( ) STEEL ( ) PLASTIC

( ) ALUMINUM ( ) INFLATABLE

WATERCRAFT PURCHASED FROM

WATERCRAFT IS

DIRECTIONS

This is your certificate stating the Hull Identification Number (HIN) that has been assigned to your watercraft. This number must be permanently affixed in two (2)

places. (A) The primary HIN in watercraft with transoms must be affixed to the starboard outboard side within two inches of the top of transom, gunwale, or hull/

deck joint, whichever is lowest. On watercraft without transoms or impractical to use transom, to the starboard outboard side of hull, aft, within one foot of the

stern and within two inches of the top of the hull side, gunwale or hull/deck joint, whichever is lowest. On catamarans and pontoon boats with replaceable hulls,

to the aft crossbeam, within one foot of the starboard hull attachment. (B) The Duplicate HIN must be affixed in an unexposed location on the interior of the boat

or beneath a fitting or item of hardware. (C) Each HIN must be carved, burned, stamped, embossed, molded, bonded, or otherwise permanently affixed to the

watercraft so that alteration, removal, or replacement would be obvious. Use of a plate must be fastened so that removal would cause scarring or damage to

surrounding hull area. HIN characters must be no less than ¼ inch in height and not attached to any removable part.

I AGREE TO COMPLY WITH THE STATE AND FEDERAL REQUIREMENTS IN DISPLAYING THE ASSIGNED NUMBERS.

I consent to have an examination of the above watercraft by the S.C. Department of Natural Resources.

I certify that the watercraft described above meets the U.S. Coast Guard safety standards.

NAME

ADDRESS

CITY, STATE, ZIP

DATE PURCHASED

LOCATED AT

TO LOCATION

AFFIDAVIT OF OWNER

TYPE VESSEL (CHECK ONE)

APPLICANT’S SIGNATURE CO-OWNER’S SIGNATURE

DL # DATE

08ad6400

(LAST) (FIRST) (M.I.)

STREET, ROUTE, OR BOX NO.

(CITY) (STATE) (ZiP CODE)

PRINT IN INK

INSTRUCTIONS

DEFINITION FOR HOMEMADE BOAT:

Homemade watercraft means any watercraft that is built by an individual for personal use from

raw materials that does not require the assignment of a federal hull identification number by a

manufacturer pursuant to federal law. An individual may build or furnish specifications. A copy of

the contract, specifications and bill of sale for raw materials must accompany registration and title

application. The person furnishing raw materials under a contract may be considered the builder.

Every homemade watercraft must be certified as meeting safety standards of the United States

Coast Guard before it can be sold by the builder. (See certification on form on reverse side.)

A REBUILT OR RECONSTRUCTED WATERCRAFT IN NO EVENT MAY BE CONSTRUED TO BE

HOMEMADE.

INSTRUCTIONS:

I. Complete Application for Hull Identification Number in full. Application must be signed.

II. Complete Watercraft/Motor Application in full and submit with correct fee. Application

must be signed. If you have any questions, see instructions attached to Watercraft/Motor

Application.

III. Any watercraft that does not have a Hull Identification Number must have completed form

and statement why the Hull Identification Number is being requested.

IV. Submit pictures of the bow (port-left & starboard-right) transom of boat and of the whole

boat.

BOAT MUST BE COMPLETED BEFORE APPLICATIONS ARE SUBMITTED

TRANSOM

PORT

(left side)

STARBOARD

(right side)

LOCATION WHERE IDENTIFICATION NUMBER SHOULD BE PLACED