Sequel_System_ALL_Booklet_v1_052611 Sequel 6019 Bdi Assembly Instructions

: Sequel 6019 Bdi Assembly Instructions sequel_6019_bdi_assembly_instructions images 1729 p4dbimg

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

ATT E N T ION :

SEQUEL

®

OFFICE

PLEASE FOLLOW
THESE INSTRUCTIONS
CAREFULLY.

Sequel Corner 6019
Assembly and Placement Information

CORNER

BDIUSA.COM

6019

2

desk
and

return

features

Thanks for purchasing the
Sequel System.
Before you begin setting up the Sequel System Components,
it is imperative that you read the Consumer Considerations
section on the next page.

3

Consumer Considerations

Placement

Once the Sequel System is fully assembled, it cannot be moved.
Make all positioning adjustments prior to final assembly.

Plan your space.

Forethought is essential in determining the placement of each
component. Using a measuring tape, determine how much
floor space each unit will require. A cardboard template has
been provided in order to help aid this process.

Get someone to help you.

Help from a second person is required for the majority of the
steps outlined in this instruction manual.

AC power outlet and wire management

Depending on the configuration of your office set up, the Sequel
cabinet may end up resting in front of an AC power outlet. If
so, be sure to plug in the AC power strip, phone/ethernet or
extension cords prior to placing the cabinet in its final position.

Leveling

SEQUEL Furniture is designed for indoor use on level floors. If
the floors are uneven, adjust levelers as necessary.

Tempered glass.

Exercise caution while handling the glass, and be sure to
employ the help of another person. Keep edges of glass panels
away from hard surfaces in order to prevent breakage.

4

This page outlines two scenarios:

Scenario 1

If cabinet is NOT blocking an AC power
outlet, it may be positioned close to the wall.

Power

Consumer Considerations

Power & Placement

Top View

Scenario 2

If cabinet is going to block an AC power
outlet, position cabinet approximately 3” from
wall. Low profile extension plugs may be
used to reduce the amount of space required
in this application.

3"

Power

Top View

5

step 1

Corner Desk

Model 6019
Your SEQUEL® 6019 Furniture is engineered
for easy assembly.
Carefully follow this procedure to prevent
any damage.
Do not use power tools for assembly of this product.

Placement and
Maintenance

SEQUEL® 6019 Furniture is designed for
indoor use on level floors. Clean glass with
glass cleaner, and steel parts and wood
veneer with a moist cloth.

.
K
K

Unpack and identify the components.
The assembly workspace should be a
non-marring surface such as carpet. For
missing hardware pieces, please contact
BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please
contact your BDI Retailer.

E
E

6

C
C

H
H

D
D

F
F

A

Hex Wrench 4mm x 1

B

Hex Wrench 3mm
x 1 (for Leveler
adjustment)

C

1/4-20 5/8” Machine
Screws 4mm Socket
Drive x 4

D

1/4-20 1/2” Flat Head
Screws 4mm Socket
Drive x 4

E

Rubber Stem Bumpers
x3

F

1/4-20 60mm Machine
Screws 4mm Socket
Drive x 6

G
H
I
J

.

Cardboard Template x 1
Desk Frame Assembly x 1
Corner Leg x 1
Corner Leg Cover

K

Glass Top x 1

L

Leveler x 1

M

Velcro Straps x 6

N

Plastic Clips x 6

O

Magnets x 4

J
J

G
G

I

L
L

Plan View

step 2

G
G

Template

Position the Template (G) in the desired
location where the corner desk will
be positioned, followed by the Sequel
cabinets. Align the side of the cabinet with
the outside edge of the template. NOTE:
Cabinets’ top glass are not installed.

Room View

7

step 3

Mx6

Nx6

Wire Management
(Optional)

For the purpose of wire management,
use Plastic Clip (N) to install Velcro Straps
(M) to outside perimeter of Desk Frame
Assembly (H).

8

step 4

A

Cx4

Attach Leg to Desk
Frame

While the second person holds the desk
frame on its side position, attach Corner
Leg (J) to the underside of Desk Frame
Assembly (H) using the Hex Wrench (A)
and Machine Screws (C).

H

J

9

step 5

A

Dx4

Attach Desk Frame
to Cabinets

With the help of another person, carefully
lower Desk Frame Assembly (H) onto the
adjacent cabinets (Sequel Models 6014,
6015, 6016, or 6017). Adjust frame so that
the holes are aligned with the threaded
inserts on top of the cabinets. Once holes
are aligned, install Flat Head Screws (D)
using Hex Wrench (A).

10

step 6

Bumpers & Template
Install Rubber Stem Bumpers (E). At this
time, the cardboard template may be
removed.

Ex3

11

step 7

A

Fx6

Install Glass

With the help of another person, carefully
lower the Glass Top (K) onto the frame.
Register the steel discs on underside of
glass into the holes on the frame; then
attach the glass using Machine Screws (F)
and Allen Wrench (A).
NOTE: Do not over-tighten screws!

12

CAUTION:
When setting up multiple
workstations, leave at least
1" between each station.
Failure to do so may result in
damage to tempered glass
work surfaces.

step 8

Plan View

1"

Install Glass

Carefully lower the glass panel onto the
Sequel Cabinet (Refer to individual cabinet
instructions).

13

step 9

step 8

Magnets

Located inside the Corner Leg (I) are 4
Magnets (O) that may be peeled and
adhered to the rear side of a power strip
(not included).

Leveler

If needed, adjust leveler on Corner Leg
using 3mm Hex Wrench (B).

B
B

14

step 9

step 10

Corner Leg Cover

Upon completion of wire management,
magnetically attach the Corner Leg Cover
(J) to the front of the Corner Leg (I).

15

BDIUSA.COM

16

Designed by Matthew Weatherly.
These distinctive product configurations are protected
by US and international patents, trade dress, and/or
copyright laws. “Sequel” and BDI are trademarks of
Becker Designed, Inc. All Rights reserved. ©2011, BDI
Made in Taiwan. 6019REV052611v1



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : Adobe InDesign CS5 (7.0)
Create Date                     : 2011:06:01 16:15:48-04:00
Modify Date                     : 2017:03:04 14:01:14-05:00
Metadata Date                   : 2017:03:04 14:01:14-05:00
Format                          : application/pdf
Title                           : Sequel_System_ALL_Booklet_v1_052611.indd
Creator                         : robin
Producer                        : Acrobat Distiller 9.4.2 (Macintosh)
Document ID                     : uuid:a04ce64d-75ab-fd41-a162-99e155b86f64
Instance ID                     : uuid:e0576531-461f-a745-a083-c0c1a2d017f3
Page Count                      : 16
Author                          : robin

EXIF Metadata provided by EXIF.tools