253427 Sharpe Catalog2009
User Manual: 253427
Open the PDF directly: View PDF 
.
Page Count: 68
| Download | |
| Open PDF In Browser | View PDF |
Product Catalog 2009-2010 Welcome to Sharpe Manufacturing. Sharpe, a Graco company, manufactures and sells paint spraying equipment and accessories for the professional automotive refinisher. In 2003, Sharpe joined forces with Graco Inc, a world leader in fluid handling systems and components. Graco’s investment in Sharpe Manufacturing has meant the introduction of products that offer uncompromising performance, quality, reliability and a competitive edge. The talented and dedicated engineers in Minneapolis, MN, as well as the highly skilled manufacturing team in Sioux Falls, SD, stand proud behind each of the products they design and produce. Sharpe continues to seek out innovative solutions for the diverse global automotive refinish market, and its combined distribution network ensures you’ll get the equipment you need when you need it. If you have any questions please contact our customer service via phone, fax line, e-mail or web site at www.sharpe1.com. We will respond as quickly as possible. Thank you for this opportunity to do business with you. Respectfully, Sharpe Manufacturing Choosing the Proper Gun for Your Application Customer Service Inquiries or Orders Either can be accomplished by phone or fax Conventional Air Spray Conventional air spray technology is easy to use, delivers a Class A automotive finish quality, but has the lowest transfer efficiency (<25%) of all technologies. Phone: 1-800-742-7731 A Sharpe Representative can assist you with: • Order Entry High Volume Low Pressure (HVLP) • Product application assistance HVLP was developed to improve transfer efficiency over traditional conventional air spray technology. HVLP transfer efficiency is a minimum of 65% as long as the pressure at the aircap does not exceed 10 psi (0.7 MPa, 0.7 bar). Finish quality is similar to air spray, however the spray rates are lower than conventional air spray. In some areas, HVLP technology is required to comply with environmental standards. • Troubleshooting Low Volume Low Pressure (LVLP) • Repair advice • Part numbers • Availability of product – stock status – pricing inquiries • Recommendations for substitute product when ordered product is not in stock • Product information LVLP technology is a variation on HVLP technology. LVLP uses a low volume of air to atomize the coating compared to the high volume of air for HVLP. At 16 psi (0.1 MPa, 1.1 bar), LVLP offers the same transfer efficiency as HVLP. Due to the low CFM requirements, LVLP is an excellent option when shop air is limited. Compliant Compliant technology delivers transfers efficiency equal to or better than HVLP as long as the inlet pressure to the gun does not exceed 35 psi (0.24 MPa, 2.4 bar). The finish quality is comparable to air spray, air consumption is lower than HVLP, and the production rates are higher than HVLP. This technology is also capable of atomizing higher viscosity materials. • Delivery dates and/or delivery date changes • Product return authorizations • Credit memo questions • Shipping and traffic questions Note: Please provide your Sharpe account number when requested. Customer service representatives are available from 8:00 a.m. to 5:00 p.m. CT, Monday-Friday. Fax: 1-800-831-1919 Note: Orders can be placed by faxing your Purchase Order to the above fax number. Please include your Sharpe Account Number on all orders. visit www.sharpe1.com for updated information Contents Choosing the Proper Gun for Your Application. . . . ii RAZOR® Guns HVLP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 HVLP Waterborne. . . . . . . . . . . . . . . . . . . . 3 HVLP for Metallic . . . . . . . . . . . . . . . . . . . . 4 LVLP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Compliant. . . . . . . . . . . . . . . . . . . . . . . . . . 6 Compliant Waterborne . . . . . . . . . . . . . . . . 7 Conventional. . . . . . . . . . . . . . . . . . . . . . . . 8 HVLP for Primer . . . . . . . . . . . . . . . . . . . . . 9 Siphon Feed. . . . . . . . . . . . . . . . . . . . . . . 10 Pressure Feed. . . . . . . . . . . . . . . . . . . . . . 11 Finex™ Guns Gravity Feed HVLP and Mini-HVLP. . . . . . . 12 Gravity Feed Conventional. . . . . . . . . . . . . 13 Mini Spray Guns Gravity Feed System. . . . . . . . . . . . . . . . . 14 Pressure Feed System . . . . . . . . . . . . . . . 14 D-5-55 Detail Spray Guns. . . . . . . . . . . . . 14 775 Non-HVLP Spray Guns. . . . . . . . . . . . 15 Refrigerated Air Dryers. . . . . . . . . . . . . . . . . . 16 Dryaire Membrane System. . . . . . . . . . . . . . . 17 Dryaire Desiccant System. . . . . . . . . . . . . . . . 18 Paint Booth & Paint Prep In-Line Filters & Coalescers . . . . . . . . . . . 19 Air Filters . . . . . . . . . . . . . . . . . . . . . . . . . 20 Air Control Units. . . . . . . . . . . . . . . . . . . . 21 Regulators . . . . . . . . . . . . . . . . . . . . . . . . 22 Zephyr Air Drying Products. . . . . . . . . . . . 23 Accessories RAZOR Cup Assemblies. . . . . . . . . . . . . . 24 Cup Assemblies . . . . . . . . . . . . . . . . . 25-26 PPS Adapters. . . . . . . . . . . . . . . . . . . . . . 26 Air Adjusting Valves. . . . . . . . . . . . . . . . . . 27 Pressure Accessories. . . . . . . . . . . . . . . . 28 Other Accessories. . . . . . . . . . . . . . . . 29-30 How to Use Dr. Gun. . . . . . . . . . . . . . . . . . . . . 29 How to Build an Entire Sharpe System . . . . . . 31 Reference Pages Conversion Chart List. . . . . . . . . . . . . 33-34 Spray Gun Reference Guide . . . . . . . . 35-37 Replacement Parts Drawings Index. . . 38-61 Terms & Conditions of Sale. . . . . . . . . . . . 62 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63-64 Warranty Information . . . . . . . inside back cover RAZOR Premium Performance & Quality HVLP Spray Gun • Extremely smooth spray pattern for superior finishes ® • Capable of atomizing a broad range of coatings from primer, base, to clear • Ergonomic gun handle, lightweight, and low trigger pull for ultimate painter comfort • Made in the USA and backed by a 3-year warranty The best American made gun for spraying base coat and clear coat when HVLP technology is required. The RAZOR has 100% stainless steel fluid passages and stainless steel needle and nozzle. The RAZOR offers longterm affordability with ultra long life needle packings and RAZOR HVLP low cost of ownership due to cost effective repair parts. li 1 4mm nozzle for easy cleaning. Nickel-plated finish allows Aircap Pattern 3M™ PPS™ Adapter and 23 ounce polished aluminum gravity cup included. • Air Inlet Size: 1/4 in npsm (R 1/4 - 19) • Max. Air Inlet Pressure: 29 psi (0.2 MPa, 2.0 bar) 14 in • Air Consumption: 14.4 CFM at 29 psi (0.2 MPa, 2.0 bar) • Cup Size: 23 oz (0.68 l) • Weight with cup: 1.3 lb (0.6 kg) • Finish: Nickel • Instruction Manual: PN 311684 • Reference p. 38 Size Gun PN Nozzle PN Needle Assembly Applications 1.2 mm 253432 253793 253771 Base coat, high solid clear coat, waterborne base coat, single stage 1.3 mm 253433 253794 253771 Base and clear coats, waterborne base coat, high solid, single stage 1.4 mm 253434 253795 253772 Base and clear coats, single stage, sealers, low solid clear 1.5 mm 253435 253796 253772 Base and clear coats, sealers, enamels, medium to high viscosity Air Adjusting Valve with Gauge RAZOR Primer PN U04410 (p. 27) PN 253438 (p. 9) 2 www.sharpe1.com • 1-800-742-7731 Aluminum Gravity Feed Cup 34 oz (1 l) Dryaire Desiccant System PN 253978 (p. 24) PN 6760 (p. 18) RAZOR ® Premium Performance & Quality HVLP Spray Gun • HVLP technology aircap technology optimized for waterborne or water base paint • Superior atomization for material distribution • Ergonomic gun handle, lightweight and low trigger pull for ultimate painter comfort • Made in the USA and backed by a 3-year warranty The HVLP Waterborne gun has been optimized for waterborne or water base paint. The RAZOR is waterborne compatible with 100% stainless steel fluid passages and stainless steel needle and nozzle. The RAZOR offers long-term affordability with ultra long life needle packings and low cost of ownership due to cost effective repair parts. Nickel-plated finish allows for easy cleaning. Aircap Pattern 3M™ PPS™ Adapter and 23 ounce plastic gravity cup included. • Air Inlet Size: 1/4 in npsm (R 1/4 - 19) • Max. Air Inlet Pressure: 29 psi (0.2 MPa, 2.0 bar) 14 in • Air Consumption: 14.4 CFM at 29 psi (0.2 MPa, 2.0 bar) • Cup Size: 23 oz (0.68 l) • Weight with cup: 1.3 lb (0.6 kg) • Finish: Nickel • Instruction Manual: PN 311684 • Reference p. 38 Size Gun PN Nozzle PN Needle Assembly Applications 1.2 mm 289388 289380 253771 Waterborne base coats 1.3 mm 289389 289381 253771 Waterborne base coats 1.4 mm 289571 289561 253771 Waterborne base coats RAZOR Compliant Waterborne Dryaire Membrane System PN 289390 (p. 7) PN 6770 (p. 17) Zephyr Air Drying Gun Filter & Coalescer PN 289956 (p. 23) PN 6910 (p. 19) www.sharpe1.com • 1-800-742-7731 3 RAZOR ® Premium Performance & Quality HVLP for Metallic Spray Gun • Well-defined spray pattern for superior material distribution • Excellent finishes for metallic as well as base coat • Ergonomic gun handle, lightweight, and low trigger pull for ultimate painter comfort • Made in the USA and backed by a 3-year warranty The RAZOR has 100% stainless steel fluid passages and stainless steel needle and nozzle. The RAZOR offers longterm affordability with ultra long life needle packings and low cost of ownership due to cost effective repair parts. Nickel-plated finish allows for easy cleaning. 3M™ PPS™ Adapter and 23 ounce polished aluminum gravity cup included. • Air Inlet Size: 1/4 in npsm (R 1/4 -19) Aircap Pattern • Max. Air Inlet Pressure: 29 psi (0.2 MPa, 2.0 bar) • Air Consumption: 14.4 CFM at 29 psi (2.0 bar) • Cup Size: 23 oz (0.68 l) • Weight with cup: 1.3 lb (0.6 kg) 14 in • Finish: Nickel • Instruction Manual: PN 311684 • Reference p. 38 Size Gun PN Nozzle PN Needle Assembly Applications 1.3 mm 289214 253794 253771 Metallic paint & fine metallic paint 1.4 mm 289215 253795 253772 Metallic paint & fine metallic paint 1.5 mm 289216 253796 253772 Metallic paint & fine metallic paint Air Adjusting Valve with Gauge Spray Gun Brush Kit F2 Disposable In-Line Filter (Jar of 25) Dryaire Membrane System PN U04410 (p. 27) PN 8260 (p. 30) PN 8125 (p. 30) PN 6770 (p. 17) 4 www.sharpe1.com • 1-800-742-7731 RAZOR ® Premium Performance & Quality LVLP Spray Gun • Capable of spraying base coat and clear coat, the LVLP RAZOR has been optimized to deliver the finest finish quality for clear coats • The LVLP is an excellent choice for shops where air supply is limited • Ergonomic gun handle, lightweight and low trigger pull for ultimate painter comfort • Made in the USA and backed by a 3-year warranty The RAZOR has 100% stainless steel fluid passages and stainless steel needle and nozzle. The RAZOR offers longterm affordability with ultra long life needle packings and low cost of ownership due toli cost effective repair parts. AZOR VL C t RAZ R 4mm n allows zzle Nickel-plated finish for easy cleaning. 3M™ PPS™ Adapter and 23 ounce polished aluminum gravity cup included. Aircap Pattern • Air Inlet Size: 1/4 in npsm (R 1/4 - 19) • Max. Air Inlet Pressure: 16 psi (0.1 MPa, 1.1 bar) • Air Consumption: 8.8 CFM at 16 psi (1.1 bar) 13 in • Cup Size: 23 oz (0.68 l) • Weight with cup: 1.3 lb (0.6 kg) • Finish: Nickel • Instruction Manual: PN 311684 • Reference p. 38 Size Gun PN Nozzle PN Needle Assembly Applications 1.3 mm 253427 253803 253771 Base and clear coats, high solid, single stage 1.4 mm 253428 253804 253772 Base and clear coats, single stage, sealers, low solid clear coat 1.5 mm 253429 253805 253772 Base and clear coats, enamels, medium to high viscosity Model 705FC In-Line Coalescer w/Drain RAZOR Primer PN 6910 (p. 19) PN 253438 (p. 9) Aluminum Gravity Feed Cup 34 oz (1 l) Dryaire Desiccant System PN 253978 (p. 24) PN 6760 (p. 18) www.sharpe1.com • 1-800-742-7731 5 RAZOR ® Premium Performance & Quality Compliant Spray Gun • First-rate atomization, with transfer efficiency equal to or better than HVLP • Compliant technology is capable of atomizing higher viscosity materials and offers higher production rates when compared to HVLP • Ergonomic gun handle, lightweight and low trigger pull for ultimate painter comfort • Made in the USA and backed by a 3-year warranty The RAZOR has 100% stainless steel fluid passages and stainless steel needle and nozzle. The RAZOR offers longterm affordability with ultra long life needle packings and low cost of ownership due to cost effective repair parts. Nickel-plated finish allows for easy cleaning. 3M™ PPS™ Adapter and 23 ounce polished aluminum gravity cup included. • Air Inlet Size: 1/4 in npsm (R 1/4-19) • Max. Air Inlet Pressure: 35 psi (0.24 MPa, 2.4 bar) Aircap Pattern • Air Consumption: 11.2 CFM at 35 psi (2.4 bar) • Cup Size: 23 oz (0.68 l) • Weight with cup: 1.3 lb (0.6 kg) 14 in • Finish: Nickel • Instruction Manual: PN 311684 • Reference p. 38 Size Gun PN Nozzle PN Needle Assembly Applications 1.2 mm 253441 253817 253771 Base and clear coats, high solid, single stage 1.3 mm 253442 253818 253771 Base and clear coats, high solid, single stage 1.4 mm 253443 253819 253771 Base and clear coats, single stage, sealers, low solid clear 1.5 mm 288654 288653 253772 Primer, high viscosity 1.6 mm 253444 253820 253772 Primer, high viscosity Air Adjusting Valve with Gauge Spray Gun Brush Kit 6 ft Air Hose Dryaire Membrane System PN U04410 (p. 27) PN 8260 (p. 30) PN 7110 (p. 29) PN 6770 (p. 17) 6 www.sharpe1.com • 1-800-742-7731 RAZOR ® Premium Performance & Quality Compliant Spray Gun • Aircap technology optimized for waterborne or water base paint • Superior atomization for material distribution • Ergonomic gun handle, lightweight and low trigger pull for ultimate painter comfort • Made in the USA and backed by a 3-year warranty The Compliant Waterborne gun offers higher production rates when compared to HVLP. The RAZOR is waterborne compatible with 100% stainless steel fluid passages and stainless steel needle and nozzle. The RAZOR offers long-term affordability with ultra long life needle packings and low cost of ownership due to cost effective repair parts. Nickel-plated finish allows for easy cleaning. 3M™ PPS™ Adapter and 23 ounce plastic gravity cup included. Aircap Pattern • Air Inlet Size: 1/4 in npsm (R 1/4 - 19) • Max. Air Inlet Pressure: 35 psi (0.24 MPa, 2.4 bar) • Air Consumption: 11.2 CFM at 35 psi (2.4 bar) 14 in • Cup Size: 23 oz (0.68 l) • Weight with cup: 1.3 lb (0.6 kg) • Finish: Nickel • Instruction Manual: PN 311684 • Reference p. 38 Size Gun PN Nozzle PN Needle Assembly Applications 1.2 mm 289390 289382 253771 Waterborne base coats 1.3 mm 289391 289383 253771 Waterborne base coats 1.4 mm 289572 289562 253771 Waterborne base coats RAZOR HVLP Waterborne Dryaire Membrane System PN 289388 (p. 3) PN 6770 (p. 17) Zephyr Air Drying Gun Filter & Coalescer PN 289956 (p. 23) PN 6910 (p. 19) www.sharpe1.com • 1-800-742-7731 7 RAZOR ® Premium Performance & Quality Conventional Spray Gun • Finest finish quality with the lowest transfer efficiency when compared to HVLP, LVLP, and Compliant technology • Wide variety of nozzle sizes and fast production rates to meet your needs • Ergonomic gun handle, lightweight and low trigger pull for ultimate painter comfort • Made in the USA and backed by a 3-year warranty The Conventional RAZOR has 100% stainless steel fluid passages and stainless steel needle and nozzle. RAZOR offers long-term affordability with ultra long life needle packings and low cost of ownership due to cost effective repair parts. Nickel-plated finish allows for easy cleaning. 3M™ PPS™ Adapter and 23 ounce polished aluminum gravity cup included. • Air Inlet Size: 1/4 in npsm (R 1/4 -19) Aircap Pattern • Air Consumption: 13.3 CFM at 43 psi (3.0 bar) • Cup Size: 23 oz (0.68 l) • Weight with cup: 1.3 lb (0.6 kg) 13 in • Finish: Nickel • Instruction Manual: PN 311684 • Reference p. 38 Size Gun PN Nozzle PN Needle Assembly Applications 1.4 mm 288281 288297 253771 Base and clear coats, low solid clear, single stage, sealers Air Adjusting Valve with Gauge RAZOR Primer PN U04410 (p. 27) PN 253438 (p. 9) 8 www.sharpe1.com • 1-800-742-7731 Aluminum Gravity Feed Cup 34 oz (1 l) Dryaire Desiccant System PN 253978 (p. 24) PN 6760 (p. 18) RAZOR High Performance Primer HVLP for Primer Spray Gun • Delivers top quality atomization ® • Minimizes overspray to reduce masking and sanding • Ergonomic blue anodized gun handle, lightweight and low trigger pull for ultimate painter comfort • Made in the USA and backed by a 3-year warranty The RAZOR primer has a stainless steel needle and nozzle. The RAZOR offers long-term affordability with ultra long life needle packing and low cost of ownership due to cost effective repair parts. 23 ounce brushed aluminum cup included. 3M™ PPS™ Adapter is not included, it is an accessory and can be purchased separately. • Air Inlet Size: 1/4 in npsm (R 1/4 -19) • Max. Air Inlet Pressure: 29 psi (0.2 MPa, 2.0 bar) • Air Consumption: 14.4 CFM at 29 psi (2.0 bar) Aircap Pattern • Cup Size: 23 oz (0.68 l) • Weight with cup: 1.3 lb (0.6 kg) • Finish: Blue Anodized 14 in • Instruction Manual: PN 311684 • Reference p. 38 Size Gun PN Nozzle PN Needle Assembly Applications 1.3 mm 289839 289841 253771 Primer, high viscosity 1.5 mm 253437 253789 253772 Primer, high viscosity 1.8 mm 253438 253790 253772 Primer, high viscosity 2.3 mm 253439 253791 253774 Primer, high viscosity, metal flake 2.5 mm 24B233 24B235 253775 Sprayable polyester Air Adjusting Valve with Gauge Spray Gun Brush Kit PPS Adapter Dryaire Membrane System PN U04410 (p. 27) PN 8260 (p. 30) PN 253969 (p. 26) PN 6770 (p. 17) www.sharpe1.com • 1-800-742-7731 9 RAZOR ® Premium Performance & Quality Siphon Spray Guns • • • • • • • • • • Extremely smooth spray pattern for superior finishes • Capable of atomizing a broad range of coatings • Ergonomic gun handle, lightweight and low trigger pull • Long-term affordability with ultra long life needle packing • Made in the USA and backed by a 3-year warranty • Includes spray gun and 1 qt (0.95 l) cup assembly Air Inlet Size: 1/4 npsm (R 1/4 -19) Fluid Inlet: 3/8 npsm (R 3/8-19) Max. Air Pressure HVLP: 30 psi (0.21 MPa, 2.1 bar) Max. Air Pressure Compliant: 35 psi (0.24 MPa, 2.4 bar) Cup Size: 1 qt (0.95 l) Weight with cup: 2.1 lb (1.0 kg) Finish: Nickel Instruction Manual: PN 311685 Reference p. 40 HVLP Siphon Size Gun PN Aircap Nozzle Needle Assembly Air Consumption 2.2 mm 287961 253827 253778 253777 11.2 CFM at 30 psi (2.1 bar) Primer, high viscosity 2.2 mm 289231 (Gun only) 253827 253778 253777 11.2 CFM at 30 psi (2.1 bar) Primer, high viscosity Applications Compliant Siphon Size Gun PN Aircap Nozzle Needle Assembly Air Consumption Applications 1.2 mm 288286 288454 288302 288641 10.4 CFM at 35 psi (2.4 bar) Base and clear coats, high solid, single stage 1.3 mm 288287 288454 288303 288641 10.4 CFM at 35 psi (2.4 bar) Base and clear coats, single stage, sealers, low solid clear 1.4 mm 288288 288454 288304 288642 10.4 CFM at 35 psi (2.4 bar) Base and clear coats, single stage, sealers, low solid clear 1.8 mm 288290 288454 288306 288643 10.4 CFM at 35 psi (2.4 bar) Primer, high viscosity Conventional Siphon Size Gun PN Aircap Nozzle Needle Assembly Air Consumption Applications 1.5 mm 288291 288455 288307 288642 12.2 CFM at 43 psi (3.0 bar) Base and clear coats, single stage, sealers, low solid clear 1.8 mm 288292 288455 288308 288642 12.2 CFM at 43 psi (3.0 bar) Base and clear coats, single stage, sealers, low solid clear 2.5 mm 288294 288457 288310 253777 12.2 CFM at 43 psi (3.0 bar) Primer, high viscosity 10 www.sharpe1.com • 1-800-742-7731 W E N RAZOR ® Premium Performance & Quality Pressure Feed Spray Guns • • • • • • • • Superior atomization with automotive and industrial coatings • For use with light fleet or industrial projects • Made in the USA and backed by a 3-year warranty Air Inlet Size: 1/4 npsm (R 1/4 -19) Fluid Inlet: 3/8 npsm (R 3/8-19) Max. Fluid Inlet Pressure: 300 psi (2.1 MPa, 21 bar) Max. Air Inlet Pressure 100 psi (0.7 MPa, 7 bar) Finish: Gray anodized Instruction Manual: PN 312412 Reference p. 40 & 42 HVLP Pressure Size Gun PN Aircap Nozzle Needle Assembly Air Consumption 1.0 mm 24A525 253824 253792 253769 14.4 CFM at 29 psi (2.0 bar) Clear and base coats 1.2 mm 24A526 253824 253793 253771 14.4 CFM at 29 psi (2.0 bar) Clear and base coats 1.4 mm 24A527 253824 253795 253772 14.4 CFM at 29 psi (2.0 bar) Clear and base coats Applications Compliant Pressure Size Gun PN Aircap Nozzle Needle Assembly Air Consumption 1.0 mm 24A528 253825 253816 253769 11.2 cfm at 35 psi (2.4 bar) Clear, base and primer 1.2 mm 24A529 253825 253817 253771 11.2 cfm at 35 psi (2.4 bar) Clear, base and primer 1.4 mm 24A530 253825 253819 253771 11.2 cfm at 35 psi (2.4 bar) Clear, base and primer Applications Conventional Pressure Size Gun PN Aircap Nozzle Needle Assembly Air Consumption 1.2 mm 24A531 288451 288295 253772 13.3 cfm at 43 psi (3.0 bar) Clear and base coats 1.4 mm 24A532 288451 288297 253771 13.3 cfm at 43 psi (3.0 bar) Clear and base coats 1.8 mm 24A533 288452 288299 253772 13.3 cfm at 43 psi (3.0 bar) Primer Applications HVLP Low Pressure Size Gun PN Aircap Nozzle Needle Assembly Air Consumption 1.2 mm 289233* 253824 253793 288641 14.4 CFM at 29 psi (2.0 bar) Applications Clear and base coats *Includes Model 6680 cup assembly and Model 1400 cup pressure regulator www.sharpe1.com • 1-800-742-7731 11 Finex ™ Value, Innovation & Performance! Gravity Feed HVLP and Mini-HVLP • Value – Quality guns at affordable prices • Innovation – A class leader with 29% fewer parts, readily available repair kits, optional 3M™ PPS™ adapters, optional interchangeable cups and lowest trigger pull among guns in its class • Performance – Unmatched spray pattern size and quality The FX3000 is a full-size HVLP gun with a large fan pattern, and the FX1000 mini-HVLP has two-finger control for antifatigue painting in confined access areas like doorjambs or for detailed touch-up work. • • • • • • • • • FX3000 Size Air Inlet Size:1/4 in npsm (R 1/4 - 19) Max. Air Inlet Pressure: 29 psi (0.2 MPa, 2.0 bar) Pattern Size: FX3000 12.5 in, FX1000 9 in Air Consumption at 29 psi (0.2 MPa. 2.0 bar): FX3000 9.5 SCFM, FX1000 7.0 SCFM Cup Size: FX3000 20 oz (600 cc), FX1000 4 oz (125 cc) Weight with Cup: FX3000 1.1 lb (0.5 kg), FX1000 0.9 lb (0.4 kg) Finish: Black Nickel Instruction Manual: PN 312372 Reference p. 45 FX1000 Gun PN Needle, Nozzle, Aircap Kits Applications 1.0 mm 288878 289296 Base and clear coats, light industrial, hobby, spot repair 1.3 mm 288879 289297 Base and clear coats, high solid, single stage HVLP FX3000 1.4 mm 288880 289298 Base and clear coats, single stage, sealers, low solid clear, clear coat 1.5 mm 288881 289299 Base and clear coats, sealers, enamels, medium to high viscosity 1.8 mm 288882 289300 Primer, high viscosity 1.0 mm 289200 289288 Base and clear coats, light industrial, hobby, spot repair 1.2 mm 289221 289289 Base and clear coats, high solid, single stage 1.4 mm 289222 289290 Base and clear coats, single stage, sealers, low solid clear, general purpose Mini-HVLP FX1000 Ultra Mini Aluminum Cup 125 cc Mini Aluminum Cup 250 cc 3M™ PPS™ Adapter FX1000, 1.0 needle, nozzle repair, aircap kit PN 289517 (p. 25) PN 289321 (p. 25) PN 289520 (p. 26) PN 289288 12 www.sharpe1.com • 1-800-742-7731 Finex ™ Value, Innovation & Performance! Gravity Feed Conventional • Value – Quality guns at affordable prices • Innovation – A class leader with 29% fewer parts, readily available repair kits, optional 3M™ PPS™ adapters, optional interchangeable cups and lowest trigger pull among guns in its class • Performance – Unmatched spray pattern size and quality The FX2000 conventional air spray gun delivers an excellent automotive finish when HVLP is not required. This conventional gun has multiple nozzle options and a large spray pattern up to 12 inches. Includes 600 cc aluminum cup, wrench and cleaning brush. • • • • • • • • • FX2000 Size Gun PN Air Inlet Size:1/4 in npsm (R 1/4 - 19) Max. Air Inlet Pressure: 29 psi (0.2 MPa, 2.0 bar) Pattern Size: 12 in Air Consumption: 9.5 CFM at 43 psi (0.3 MPa. 3.0 bar) Cup Size: 20 oz (600 cc) Weight with cup: 1.1 lb (0.5 kg) Finish: Black Nickel Instruction Manual: PN 312372 Reference p. 45 Needle, Nozzle, Aircap Kits Applications Conventional FX2000 1.0 mm 288883 289291 Base and clear coats, light industrial, hobby, spot repair 1.3 mm 288884 289292 Base and clear coats, high solid, single stage 1.4 mm 288885 289293 Base and clear coats, single stage, sealers, low solid clear 1.5 mm 288886 289294 Base and clear coats, sealers, enamels, medium to high viscosity 1.8 mm 288887 289295 Primer, high viscosity Ultra Mini Aluminum Cup 125 cc Mini Aluminum Cup 250 cc 3M™ PPS™ Adapter FX2000, 1.4 needle, nozzle repair, aircap kit PN 289517 (p. 25) PN 289321 (p. 25) PN 289520 (p. 26) PN 289293 www.sharpe1.com • 1-800-742-7731 13 Mini Spray Guns Details & Touch-Ups – Gravity MGF HVLP Mini Gravity Feed System The MGF HVLP Mini Gravity Feed system is ideal for all types of touch-up and detail work and sprays all automotive coatings. It is designed for left or right hand use and features an infinitely variable (round to flat) fan control. Includes UO7505 (4 oz) aluminum gravity feed cup. Size Gun PN Aircap Applications 1.4 mm 7040 34806 All automotive colors & clears • Air Inlet Size: 1/4 in npsm (m) • Air Consumption: 2.9 CFM • Max. Inlet Pressure: 40 psi (2.7 bar) • Aircap Pressure: 10 psi (0.6 bar) • Weight: 9 oz (0.25 kg) • Repair Kit: PN 34835 • Instruction Manual: PN 309989 • Reference p. 46 Mini Spray Guns Details & Touch-Ups – Pressure MPF HVLP Mini Pressure Feed System The MPF HVLP Mini Pressure Feed system is excellent for high speed production. It is designed for left or right hand use and features an infinitely variable (round to flat) fan control. • Air Inlet Size: 1/4 in npsm (m) • Air Consumption: 3.5 CFM • Max. Inlet Pressure: 40 psi (2.7 bar) • Aircap Pressure: 10 psi (0.6 bar) • Repair Kit PN: 34835 Size Gun PN Aircap Applications 1.1 mm 7045 34808 All automotive colors & clears • Instruction Manual: PN 309990 • Reference p. 47 D-5-55 Detail Spray Gun With atomization equal to a production gun, our D-5-55 Detail Spray Gun is easy to service and easy to use. This gun is ideal for painting small areas. The trigger is designed for right or left hand use. Excellent for all types of paint material. Size Gun PN Aircap Applications 1.4 mm 7030 29006 All automotive colors & clears • Cup Assembly (6 oz): PN U07510, Model D-500 U07510 • Extra Cup with Cover: PN U07530, Model D-500-72 U07530 14 www.sharpe1.com • 1-800-742-7731 • Air Inlet Size: 1/4 in npsm (R 1/4-19) • Air Consumption: 4.1 CFM • Order with Model D-500 cup assembly • Gun Weight: 8 oz (0.22 kg) • Repair Kit PN: 29086 • Instruction Manual: PN 309991 • Reference p. 48 Non-HVLP Spray Gun Classic Heavy-Duty Production Model 775 9500 - Combo Gun and Cup • Air Inlet Size: 1/4 npsm (m) The 775 Non-HVLP Spray Gun features self-aligning aircap for a perfect pattern. Our “classic” heavy-duty production spray gun provides outstanding performance and reliability. This value-priced combo package includes spray gun (PN 6835) and special cup assembly (PN 6610). • Air Consumption: 11.0 CFM at 50 psi • Instruction Manual: PN 310587 • Reference p. 52 Size PN Aircap Applications Gun & Cup 1.8 mm 9500 16111 Medium solids, colors, clears, enamels Gun Only 1.8 mm 6835 16111 Medium solids, colors, clears, enamels Troubleshooting Problem Cause Solution Normal pattern. No action necessary. Dirty or damaged aircap or fluid nozzle. Rotate aircap 180º. If pattern follows aircap, problem is in aircap. Clean and inspect. If pattern is not corrected, replace aircap. If pattern does not follow the aircap, the problem is with the fluid nozzle. Clean and inspect the nozzle. If the pattern in not corrected, replace nozzle. Pressure too high for viscosity of material being sprayed Reduce air pressure and increase material viscosity. Correct pattern by narrowing fan size with spray width adjustment knob. Dirty or distorted air horn holes. Clean and inspect aircap. If pattern is not corrected, replace aircap. Air getting into paint stream. Check if cup is empty and fill if needed. Tighten fluid nozzle. Check and tighten needle packing nut. Check fluid nozzle for damage. 1) Cup is empty. 2) Fluid adjustment knob turned too far clockwise 1) Fill cup. 2) Adjust knob counterclockwise. 1) Loose fluid nozzle. 2) Damaged fluid nozzle seal. 1) Tighten fluid nozzle. 2) Replace seal. 1) Air pressure too low. 1) Increase air pressure. 2) Gun held too close to surface. 2) Hold gun about 6-8 inches (15-200 mm) from surface. RIGHT WRONG Heavy top or bottom pattern WRONG Split pattern WRONG Gun spitting Will not spray Excessive air blowing back WRONG Heavy pattern or orange peel www.sharpe1.com • 1-800-742-7731 15 Refrigerated Air Dryers Cool, Dry and Clean • Ideal for body shops and industrial facilities • No separate components to pipe together • Single on/off switch, fault light • Compact and highly efficient heat exchangers This compact, easy-to-use package prevents surface blemishes and poor paint adhesion caused by compressed air humidity. Ideal for shops and facilities with 5-15 horsepower compressors, the Dryaire system is easy to install, easy to maintain and environmentally safe. It offers compact, high efficient heat exchangers, two-stage separator/filter, and a reliable air operated condensate drain. • Instruction Manual: PN 310884 Main Air Line 1 in. Pipe Minimum Dryaire Membrane or Desiccant Air Drying system at Paint Booth Air Control Unit or Air Filter Union Compressor Oil Coalescer 15 f t to Flexible Hose between Compressor and Main Air Line 20 f Air In Drain Leg Air Out Air Filter t Dryaire Membrane Ball Valve Refrigerated Air Dryer Dryaire Desiccant Model Use with Air Compressor Size Flow Capacity Power Requirements Dimensions H" x W" x D" Weight Service Kit PN 6880 5.0 - 7.5 HP 25 CFM 115/1/60 28 x 10 x 13 80 lb 39995 6885 10 HP 35 CFM 115/1/60 28 x 10 x 13 81 lb 39995 6890 15 HP 50 CFM 115/1/60 37 x 17 x 17 150 lb 39997 6895 20 HP 75 CFM 115/1/60 37 x 17 x 17 150 lb 39996 16 www.sharpe1.com • 1-800-742-7731 Dryaire Membrane System Model 6770 Advanced air drying technology for shop use. Lightweight, easy-to-install, and simple-to-operate, the Dryaire Membrane System maintains -40°F dew point while achieving 0% compressed air humidity. It removes oil and sub-micron particles down to .01 micron. PN Description 6770 Membrane System 22645 Stage 1 Replacement Filter Element U23075 Stage 2 Replacement Coalescer Element • Stage 1 filter provides removal of water and contaminants down to 5 microns 1-6770-3 Stage 3 Replacement Membrane NOTE: For the overnight drain to operate, turn off the air pressure • Shut off ball valve when not in use • Recommended installation outside spray booth • Stage 2 coalescer provides removal of oil and sub-microns particles down to .01 microns • Stage 3 membrane dryer is maintenance free, no regeneration required • Instruction Manual: PN 310596 • Reference p. 53 Stage 1 Stage 2 Stage 3 Air Inlet, NPT 1/2 in 1/2 in 1/2 in Air Outlet, NPT 1/2 in 1/2 in Air Flow Capacity 115 CFM (3.2 m /min) 70 CFM (2.0 m /min) 30 CFM (0.85 m3/min) Max. Operating Pressure 175 psi (1.2 MPa, 12 bar) 175 psi (1.2 MPa, 12 bar) 175 psi (1.2 MPa, 12 bar) Max. Temperature 150ºF (65ºC) 150ºF (65ºC) 175ºF (79ºC) 3 1/2 in 3 RAZOR HVLP 1.4 mm RAZOR Primer RAZOR HVLP Waterborne Finex FX3000 1.4 mm PN 253434 (p. 2) PN 253438 (p. 9) PN 289388 (p. 3) PN 288880 (p. 12) www.sharpe1.com • 1-800-742-7731 www.sharpe1.com • 1-800-742-7731 17 Dryaire Desiccant System Model 6760 Quick remove flange Built-in screen prevents desiccant from going down tube on refill Blue Silica Gel Desiccant beads turn pink when saturated* Sintered Bronze Element prevents any Desiccant dust from traveling downstream 2 Times larger than most competitors for longer bead life! Built in sightglass allows easy monitoring of desiccant color change Remove dirt, water, oil and uncondensed moisture from compressed air lines. The Dryaire Desiccant System’s 100% indicating silica gel provides maximum moisture absorption. It features easy desiccant change out, regenerate, or replacement (6765-1). This system maintains -40°F dew point while achieving 0% compressed air humidity. • Stage 1 Air filter includes auto drain (overnight) and 5-micron filter • Stage 2 Coalescer with auto drain (overnight) removes oil particles down to .01 micron • Stage 3 Desiccant Housing, 30 cfm capacity • Self-relieving air regulator, mounting bracket, and shut-off valve included PN Description 6760 Desiccant systems includes desiccants 22645 Stage 1 Replacement Filter Element 22655 Stage 2 Replacement Coalescer Element 6765-1 Stage 3, Replacement desiccant beads, 100% Silica Gel Desiccant (Single 5 lb can) 6765-4 Stage 3, 5 lb. Replacement desiccant beads, 100% Silica Gel Desiccant (Four 5 lb cans) 289533 Stage 3, Replacement desiccant beads, premium cobalt-chloride free silica gel (Single 5 lb can) 289534 Stage 3, Replacement desiccant beads, premium cobalt-chloride free silica gel (Four 5 lb cans) NOTE: For the overnight drain to operate, turn off the air pressure • Shut off ball valve when not in use • Recommended installation outside spray booth * Premium beads are orange and turn clear when saturated. • Instruction Manual: PN 310595 • Reference p. 54 Stage 1 Stage 2 Stage 3 Air Inlet, FPT 1/2 in 1/2 in 3/4 in (reduced to 1/2 in) Air Outlet, FPT 1/2 in Air Flow Capacity 108 CFM (3 m /min) 35 CFM (1 m /min) 30 CFM (0.85 m3/min) Max. Operating Pressure 175 psi (1.2 MPa, 12 bar) 175 psi (1.2 MPa, 12 bar) 175 psi (1.2 MPa, 12 bar) Max. Temperature 150ºF (65ºC) 150ºF (65ºC) 150ºF (65ºC) 18 www.sharpe1.com • 1-800-742-7731 1/2 in 3 3/4 in (reduced to 3/8 in) 3 Paint Booth & Paint Prep Stage 1 & Stage 2 NEW FEATURE 705FC ½ in In-Line Filter & Coalescer with Overnight Drains Prevents fish-eyes by removing water, oil & contamination without the use of desiccant. Designed for use in prep stations and air/finishing areas. Stage 1 provides removal of water and contaminants down to 5 microns. Stage 2 provides removal of oil and sub-micronic particles down to .01 microns. PN Description 6910 In-Line filter and coalescer 22645 Stage 1 Replacement Filter Element U23075 Stage 2 Replacement Coalescer Element • .01 micron filtration • Air Flow Capacity: 115 cfm (3.2 m3/min) • Air Inlet: 1/2 in NPT • Air Outlet: 1/2 in NPT • Max Temperature: 150ºF (65ºC) • Max. Operating Pressure: 175 psi (1.2 MPa, 12 bar) • Instruction Manual: PN 310611 • Reference p. 56 In-Line Filters & Coalescers Filter and Drain 707F ¾ in In-Line Filter with Overnight Drain The 707F removes oil and water contamination. Disassemble and clean the filter without tools. Features a large reusable filter element. • 5 micron filtration • Air Flow Capacity: 300 cfm (8.4 m3/min) • Air Inlet: 3/4 in NPT • Air Outlet: 3/4 in NPT PN Description • Max Temperature: 150ºF (65ºC) 6920 In-Line filter with auto drains U23080 Replacement Filter Element • Max. Operating Pressure: 175 psi (1.2 MPa, 12 bar) • Instruction Manual: PN 310611 • Reference p. 56 707C ¾ in In-Line Coalescer with Overnight Drain The 707C effectively traps fine oil mists and microscopic particles to .01 microns. Recommended for use down stream of a refrigerated air dryer. Contains spin-off bowl for quick filter changes without tools. Includes pressure drop indicator. PN Description 6930 In-Line coalescer with auto drain U23085 Replacement Coalescer Element • .01 micron filtration • Air Flow Capacity: 115 cfm (3 m3/min) • Air Inlet: 3/4 in NPT • Air Outlet: 3/4 in NPT • Max Temperature: 150ºF (65ºC) • Max. Operating Pressure: 175 psi (1.2 MPa, 12 bar) • Instruction Manual: PN 310609 • Reference p. 56 www.sharpe1.com • 1-800-742-7731 19 Air Filters Contamination Elimination Model F88 Air Filter Model F88 Air Filter is highly effective at removing water, oil & contamination. It protects air cylinders and air tools and features a reusable edge-type filter element. PN Description 8130 Air filter, 75 cfm U32719 Replacement filter element • 5 micron filtration • Air Inlet Size: 1/2 in NPT • Air Outlet Size: 3/8 in NPT and 1/4 in NPT plugged • Max. Operating Pressure: 160 psi (11.0 bar) • Filter Capacity: 75 cfm • Instruction Manual: PN 310603 • Reference p. 57 Model F88M Mechanic’s Air Filter Model F88M Mechanic’s Air Filter is designed for the mechanic who wants to protect their investment in air tools. This unit is portable and easily mounts anywhere. It is designed for use with quick couplers. • 5 micron filtration • Air Inlet Size: 1/4 in NPT • Air Outlet Size: 1/4 in NPT and 1/4 in NPT plugged • Max. Operating Pressure: 160 psi (11.0 bar) PN Description • Filter Capacity: 75 cfm 8135 Air filter with quick connect, 75 cfm • Instruction Manual: PN 310603 U32719 Replacement filter element • Reference p. 57 Model 606 Air Filter The Model 606 Air Filter is most effective at removing water, oil & contamination. Its features include a large, reusable, edge-type filter element. • 5 micron filtration • Air Inlet Size: 1/4 in NPT • Air Outlet Size: 1/4 in NPT and 1/4 in NPT plugged • Max. Operating Pressure: 160 psi (11.0 bar) PN Description • Filter Capacity: 120 cfm UO6710 Air filter, 120 cfm • Instruction Manual: PN 310601 19930 Replacement filter element • Reference p. 59 20 www.sharpe1.com • 1-800-742-7731 Air Control Units Protection for Air Cylinders & Air Tools 880A Air Control Unit Highly effective at removing water, oil and contamination to protect air cylinders and air tools. Contains 18C-3R Regulator with a 160 lb inverted gauge and air cock. Regulated outlet and filtered main line outlet included. • 5 micron filtration • Air Inlet Size: 1/2 in NPT (f) • Air Outlet Size: 3/8 in NPT (f) and 1/4 in NPT (f) plugged • Max. Operating Pressure: 200 psi (13.6 bar) • Filter Capacity: 75 cfm PN Description • Regulator Capacity: 50 cfm 6950 Air Control Unit, 75 cfm • Instruction Manual: PN 310603 U32719 Replacement filter element • Reference p. 58 606A Air Control Unit Effective at removing water, oil and contamination to protect air cylinders and air tools. Contains 18C-3R Regulator with a 160 lb inverted gauge and air cock. Regulated outlet and filtered main line outlet included. • 5 micron filtration • Air Inlet Size: 1/2 in NPT • Air Outlet Size: 1/4 in NPT • Max. Operating Pressure: 200 psi (13.6 bar) • Filter Capacity: 120 cfm PN Description UO6720 Air Control Unit, 120 cfm 19930 Replacement filter element • Regulator Capacity: 50 cfm • Instruction Manual: PN 310601 • Reference p. 60 606B Air Control Unit Effective at removing water, oil and contamination to protect air cylinders and air tools. Contains 18C-3R Regulator with a 160 lb inverted gauge and air cock. Regulated outlet and filtered main line outlet with 200 lb gauge included. PN Description 6730 Air Control Unit, 120 cfm 19930 Replacement filter element • 5 micron filtration • Air Inlet Size: 1/2 in NPT • Air Outlet Size: 1/4 in NPT • Max. Operating Pressure: 200 psi (13.6 bar) • Filter Capacity: 120 cfm • Regulator Capacity: 50 cfm • Instruction Manual: PN 310601 • Reference p. 60 606C Air Control Unit Effective at removing water, oil and contamination to protect air cylinders and air tools. Contains two 18C-3R Regulators with a 160 lb inverted gauge and air cock. Two regulated outlets and a filtered main line outlet with 200 lb gauge included. • 5 micron filtration • Air Inlet Size: 1/2 in NPT • Air Outlet Size: 1/4 in NPT • Max. Operating Pressure: 160 psi (13.6 bar) • Filter Capacity: 120 cfm PN Description • Regulator Capacity: 50 cfm 6740 Model 606C Air Control Unit • Instruction Manual: PN 310601 19930 Replacement Filter Element • Reference p. 60 www.sharpe1.com • 1-800-742-7731 21 Regulators Pressure Regulation 16C-MR Mini Spray Gun Regulator This small, lightweight unit attaches to any spray gun, including HVLP, for accurate air pressure regulation. It is a true diaphragm regulator with push-pull lock pressure setting and easy-to-read 0-160 psi gauge. PN Description 1410 Mini Regulator • Air Inlet: 1/4 in npsm (f) • Air Outlets (swivel nut): 1/4 in npsm (f) • Air Flow Capacity: 22 cfm • Instruction Manual: PN 310605 18B-2R and 18C-3R Air Regulators 50 CFM air regulator. • Air Inlet: 3/8 in npsm (f) • Air Outlets (3): 1/4 in npsm (f) • Air Flow Capacity: 50 cfm PN ID Description • Instruction Manual: PN 310605 1610 18B-2R Two regulated outlets, one main line outlet (bypass) • Reference p. 58 & 59 1630 18C-3R Three regulated outlets, one main line outlet (bypass) 18B-500 and 18C-500 Air Regulator Assembly 50 CFM air regulator with an air gauge and air cock. • Air Inlet: 3/8 in npsm (f) • Air Outlets (2): 1/4 in npsm (f) • Air Flow Capacity: 50 cfm PN ID Description • Instruction Manual: PN 310605 1620 18B-500 Two regulated outlets, one main line outlet (bypass) • Reference p. 58 1640 18C-500 Three regulated outlets, one main line outlet (bypass) 22 www.sharpe1.com • 1-800-742-7731 W E N Zephyr ™ Air Drying Products Zephyr Gun • Working Pressure: 10-60 psi (0.7-4 bar, 0.07-0.4 MPa) This easy to use gun is designed to decrease the drying time of waterborne paint using compressed air. Can be used freehand or attach to the Zephyr Gun Stand. Intake filter will prevent contamination of vehicle surface. 1 Year Warranty. PN Description 289956 Zephyr Air Drying Gun 289987 Replacement diffuser 289986 Replacement filter (5-pack) • Maximum Pressure - Gun: 175 psi (12 bar, 1.2 MPa) • Maximum Pressure - Stand: 125 psi (9 bar, 0.9 MPa) • Air Consumption @ 60 psi (4 bar, 0.4 MPa): 17.5 scfm • Weight: 485 g (17.1 oz) • Instruction Manual: PN 313005 • Reference p. 61 360º Zephyr Gun Stand 360º The 360° Zephyr Gun Stand can hold up to 2 guns. The stand is portable and offers variable positioning with quick disconnect couplers. 1 Year Warranty. PN Description 289957 Zephyr Gun Stand, includes 2 piece quick disconnect, 2 piece PU hose, 3 piece airway 289958 Zephyr Guns & Gun Stand Kit 360º 360º 360º • Foot shelf can be adjusted from side to side and top to bottom • Maximum adjustable height: 82.7 in (210 cm) • Minimum adjustable height: 7.9 in (20 cm) • Pole length: 35 in (89 cm) • Foot Shelf diameter: 37.8 in (96 cm) • Foot Shelf weight: 9.92 lbs (4.5 kg) • Instruction Manual: PN 313005 • Reference p. 61 www.sharpe1.com • 1-800-742-7731 23 Accessories Air Adjusting Valves 12AAV Air Adjusting Valve PN 1010 • • • Precision tapered valve Start from closed to fully open in approximately 4 turns Infinitely adjustable • • • Large, easy-to-handle knob Air Inlet ¼ in npsm Air Outlet (swivel nut) ¼ in npsm 24AAV Air Adjusting Valve with Gauge PN 2210 • • Precision tapered air adjusting valve with heavy-duty pressure gauge reading up to 160 psi Start from closed to fully open in approximately 4 turns • • • • • Infinitely adjustable Large, easy-to-handle knob Use on HVLP spray guns Air Inlet ¼ in npsm Air Outlet (swivel nut) ¼ in npsm Compressed Air Test Valve PN 3310 • • • • 36AAV-HV High Volume Air Adjusting Valve 4 Element Test 1. Static air pressure at the gun 2. Dynamic air pressure at the gun 3. Air pressure drop from the compressed air source to the point of use 4. Adequate or inadequate compressed air supply Air Inlet ¼ in npsm Air Outlet (swivel nut) ¼ in npsm H.O.V. High Output Precision Air Valve PN UO4410 • • • Small, lightweight precision metering valve that attaches to any HVLP spray gun for precision pressure setting for that gun Easy-to-read from 0-160 psi gauge Fits all leading spray guns Digi-tell™ PN UO5510 • • • • • • 24 Pressure range up to 100 psi supports a variety of air consumption needs Solvent resistant for gun wash, based on normal usage PSI or bar set capability Long 4-year battery life based on normal usage with motion sensing display to conserve battery Universal ¼ in npsm fitting fits most spray guns Instruction Manual: PN 311537 Accessories Razor Gravity Feed Cup Assemblies Polished Aluminum Gravity Feed Cup PN 253977 • • • 23 oz capacity (650 cc) Rapid thread size 5/8-11 UNC 2A Replacement Lid: PN 22002 Polished Aluminum Gravity Feed Cup PN 253978 • • • 34 oz capacity (1 l) Thread size 3/8 in npsm (m) Replacement Lid: PN 27405 Plastic Gravity Feed Cup PN 288661 • • • 23 oz capacity (650 cc) Thread size 3/8 in npsm (m) Replacement Lid: PN 15X427 Aluminum Gravity Feed Cup PN 6685 • • • • RAZOR Primer gun & Legacy guns 23 oz capacity (650 cc) Thread size 3/8 in npsm (m) Replacement Lid: PN 22002 Aluminum Gravity Feed Cup PN 6690 • • • • RAZOR Primer gun & Legacy guns 34 oz capacity (1 l) Thread size 3/8 in npsm (m) Replacement Lid: PN 27405 M6C125 Aluminum Mini Gravity Cup PN UO7505 • • • 4 oz capacity (125 cc) Thread size 1/8 in npsm (m) Lid assembly (PN 34800) • • • • 6 oz capacity (190 cc) Includes adapter to fit larger gun models (PN 37065) • • • RAZOR Gravity Feed Guns • LVLP • HVLP • Compliant • Conventional • Metallic RAZOR Gravity Feed Guns • LVLP • HVLP • Compliant • Conventional • Metallic RAZOR Guns • HVLP Waterborne • Compliant Waterborne RAZOR Guns • 289839...............1.3 mm • 253437...............1.5 mm • 253438...............1.8 mm • 253439...............2.3 mm • 24B233..............2.5 mm RAZOR Guns • 289839...............1.3 mm • 253437. .............1.5 mm • 253438...............1.8 mm • 253439...............2.3 mm • 24B233..............2.5 mm • MGF HVLP PN 7040.............1.4 mm Adapter (PN 37065) Adapter for mini cup used on larger gun models Instruction Manual: PN 310588 M6C190 Aluminum Mini Gravity Cup PN 7506 Recommended for use with: • MGF HVLP PN 7040.............1.4 mm Thread size 1/8 in npsm (m) Lid assembly (PN 34800) Instruction Manual: PN 310588 25 Accessories Cup Assemblies Finex Ultra Mini Aluminum Gravity Cup PN 289517 • • • 4 oz capacity (125 cc) Fits all Finex 1000/2000/3000 Series Guns Replacement Plastic Lid: PN 289816 Finex Mini Aluminum Gravity Cup PN 289321 • • • 8 oz capacity (250 cc) Fits all Finex 1000/2000/3000 Series Guns Replacement Plastic Lid: PN 289817 Finex Aluminum Gravity Feed Cup PN 289320 • • • 20 oz capacity (600 cc) Fits all Finex 1000/2000/3000 Series Guns Replacement Plastic Lid: PN 289818 Finex Mini Plastic Gravity Feed Cup PN 289323 • • 4 oz capacity (125 cc) Fits all Finex 1000/2000/3000 Series Guns Finex Plastic Gravity Feed Cup PN 289322 • • 20 oz capacity (600 cc) Fits all Finex 1000/2000/3000 Series Guns FX100 Mini Aluminum Gravity Feed Cup PN 15E422 • • • 5 oz capacity (150 cc) Gasket Kit PN 253418 (qty 5) Replacement Lid: PN 15F402 FX200/FX300 Aluminum Gravity Feed Cup PN 15E449 • • • 20 oz capacity (600 cc) Gasket Kit PN 253417 (qty 5) Replacement Lid: PN 15F403 Siphon Cup Assembly PN 6610 26 • • • • • Use with Siphon Feed Gun 1 quart capacity Will not drip when spraying in any position Thread size 3/8 in npsm (f) swivel nut No accidental spills or damaged work areas Accessories Cup Assemblies Model D-500 Cup Assembly PN UO7510 • • • • Use with D-5-55 Detail Spray Gun 6 oz capacity (190 cc) Thread size 1/4-18 npsm (m) female swivel Made of high density polyethylene construction Model D-500-72 Extra Translucent Cup with Cover PN UO7530 • • • • Use with D-5-55 Detail Spray Gun 6 oz capacity (190 cc) Translucent cup Includes lid for paint storage PPS Adapters 3M™ PPS™ Adapters PN 253975 • PPS Adapter for most RAZOR guns PN 253969 • PPS Adapter for RAZOR Primer & Legacy guns PN 289520 • PPS Adapter for Finex guns FX1000/2000/3000 Series 27 Accessories Pressure Cups Low Pressure Cup Assembly PN 6680 • • • • Designed for use with Sharpe pressure feed 1 quart capacity Clamp type assembly Order with 6 ft hose (PN 7130) • Inlet 3/8 in npsm (f) swivel nut • Max Pressure: 10 psi • Cup Assembly (PN 6610) • Replacement Gasket (PN 20994) • Air 1/4 in NPS (m) Model 7004 2-Quart Pressure Cup PN 7004 • • • • For use with any pressure feed spray gun when more than one quart of material is required Replacement gasket (PN U42002) Wide mouth for easy cleanup Cup pressure regulator allows for fluid adjustment from 0-50 psi Pressure Pots • • • • • 1610 Air regulator used to regulate fluid pressure Tank capacity: 2.5 gal (9.5 l) Accessory hose to use 7210 or 7220 Includes one (1) tank liner Replacement tank liner: 112077 (5-pack) 112078 (25-pack) • Pressure relieve valve setting: 50 psi (350 kPa, 3.5 bar) • Air inlet size: 1/4 npt (m) • Fluid outlet size: 3/8 npsm (m) • Air outlet size: 1/4 npt (m) • Height: 21 in (533 mm) • Weight: 11 lb (5 kg) • Instruction Manual: PN 313291 • Reference p. 50 2.5 Gallon Pressure Pot Dual Regulators • Max working pressure: 50 psi (350 kPa, 3.5 bar) PN 24A557 • Air inlet size: 1/4 npt (m) • • • • • • 1610 Air regulator used to regulate fluid pressure 1630 Air regulator used to regulate fluid pressure Tank capacity: 2.5 gal (9.5 l) Accessory hose to use 7210 or 7220 Includes one (1) tank liner Replacement tank liner: 112077 (5-pack) 112078 (25-pack) • Pressure relieve valve setting: 50 psi (350 kPa, 3.5 bar) • Fluid outlet size: 3/8 npsm (m) • Air outlet size: 1/4 npt (m) • Height: 21 in (533 mm) • Weight: 11 lb (5 kg) • Instruction Manual: PN 313291 • Reference p. 51 28 www.sharpe1.com • 1-800-742-7731 W PN 24A555 • Max working pressure: 50 psi (350 kPa, 3.5 bar) NE 2.5 Gallon Pressure Pot Single Regulator Accessories Hose Accessories Hose Assemblies with Reusable Connectors PN 8310 8320 8330 8340 Description ID Connectors - npsm (f) 7110 6 ft Air hose 5/16 in 1/4 in 7120 6 ft Fluid hose 1/4 in 3/8 in 7130 6 ft Hose kit for 2-qt Pressure Cup (includes one each 7110 & 7120 hoses) 7210 25 ft Air hose (gun or pressure pot) 3/8 in 1/4 in 7220 25 ft Fluid hose (pressure pot) 3/8 in 3/8 in 7230 35 in Air hose with high-volume quick couplers and connectors 3/8 in 1/4 in High Volume Hose Connectors PN Description If you haven’t tried Sharpe Spray Guns or 8310 High volume 1/4 in female quick coupler 8320 High volume 1/4 in male quick coupler other Sharpe products 8330 Quick connect 1/4 in female today, we hope you 8340 Quick connect 1/4 in male will. Please take some time and review our Air Quality Test Kit entire product line and then, if you have 6760HT any questions, just Air Quality Test Kit pick up the phone and Test compressed air supply to identify causes of refinish problems. Not for use in hazardous locations. Test for: • Inadequate compressed air supply • Compressed air humidity (CAH) level • Compressed air contaminants call 1-800-SHARPE1 or send us a note via Ask Doctor Gun. How to Use Ask Dr. Gun The Ask Doctor Gun knowledge database gives you the ability to search for answers to some commonly asked questions. If you don’t find what you’re looking for, simply “Ask a Question” and your request will be answered the following business day or sooner. The optional “My Stuff” area tracks your questions, and allows you to search for previously asked questions in the database, as well as request notifications on specific answers when they are updated. * Find Answers: All resolved problems are in the solution database. * Search by product, category, keywords, or phrases. * Ask a Question: Submit a question to our technical support staff who will reply to you by email. * My Stuff: Login to check the status of your questions, modify your answer, update notifications and update your personal profile. www.sharpe1.com • 1-800-742-7731 29 Accessories Additional Accessories Gravity Feed Spray Gun Holder PN 9894 • • Designed to hold up to four (4) guns Mounts on wall or table Gravity Feed Filling Station PN 9893 • • Designed to hold up to three guns in place while filling Adjustable strainer holder F2 Disposable In-Line Filters • • Installs easily and reduces paint defects Disposable filter removes contaminants such as moisture and oil that condenses in the air hose between the wall mount filter and spray gun PN 8100 - Disposable Filter Blister Pack (2 per pack) PN 8125 - Disposable Filter Dispenser (Jar of 25) Spray Gun Lube PN 8255 - Spray Gun Lube (0.25 oz, Pack of 6) • • • • Keep your spray gun operating smoothly Compatible with all paint materials Convenient, easy to use spray gun lube Silicon free Spray Gun Brush Kit PN 8260 • • 30 Professional brush kit effectively cleans all model spray gun including HVLP Includes one spray gun lube How to Build an Entire Sharpe System In order to set up an effective paint system, you need to ensure that you choose the proper compressor, correctly install the proper line size, and remove moisture and contaminates from your atomizing air. Choosing the right compressor 1. Make a list of all of your air tools, (i.e., guns, grinders, etc.) 2. Determine the total CFM and psi requirements for all of your equipment. 3. Add 25% for leakage and possible future equipment to determine final CFM and psi requirements. Proper line sizing selection and installation 4. Install 5 feet of flexible hose from your compressor to your main air line stand line. 5. Main air line stand pipe should not be smaller than the compressor outlet size. 6. We suggest using ¾ inches to 1 ¼ inches copper or galvanized pipe for your main air line. 7. To avoid moisture contamination, you will need 25 feet of main air line before your first outlet to allow for proper cooling of the compressed air — 50 feet is optimal. 8. Main line air pipe should be mounted to allow for 4 inches of drop per 50 feet to assure proper drainage. 9. One last suggestion is to route your drop line to the gun up then down (layout on p. 32). 10. Close ball valve at each drop and drain the drops daily or weekly depending on the air conditions. Remove moisture and contaminants Compressed Air Humidity (CAW) can cause your finish to have poor gloss, adhesion, durability and cloudiness in the finish, which leads to costly rework. 11. CAW can be measured using Sharpe’s 6760HT humidity tester. 12. To remove moisture and contaminants (i.e., dirt, oil, etc.), use the Sharpe 6910 with an air regulator. The 6910 is a simple two-stage system. The first stage is a 5 micron air filter and the second stage is a .01 micron coalescer. The air regulator assures proper air pressure to your gun at all times. 13. If moisture is still a problem, use one of our three stage systems, Sharpe’s 6760 Dryaire Desiccant system or the 6770 Dryaire Membrane system. These systems are similar to the 6910, but add a third stage that will maintain 0% humidity at -40°F. 14. Shut the main line air off at the end of the day to ensure the auto drains work properly. 15. It is a good practice to drain your compressor daily. Setting Up Your Garage to Spray Compressed Air Pipeline Pressure Drop Table - Initial Pressure 7 kg/cm2 (100 psi) Pressure drops in 100 m (330 ft) compressed air lines are indicated in the tables below: Volume Flow FAD (m3/min) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 15 (cfm) 5 7 11 14 18 21 25 28 32 35 42 49 55 64 71 78 85 92 99 105 124 141 159 177 194 212 229 247 265 282 300 318 335 353 530 1/2 in 15.788 (kg/cm2) 0.02 0.06 0.12 0.2 0.3 0.43 0.57 0.73 0.9 1.1 (psi) 0.22 0.8 1.69 2.88 4.35 6.09 8.1 10.38 12.9 15.68 3/4 in 20.93 (kg/cm2) (psi) 0.01 0.03 0.05 0.07 0.1 0.14 0.18 0.22 0.27 0.38 0.5 0.64 0.8 0.97 1.16 1.36 0.2 0.41 0.71 1.07 1.49 1.99 2.54 3.16 3.64 5.39 7.16 9.16 11.4 13.85 16.52 19.4 Line Size 1 in 26.645 (kg/cm2) (psi) 0.01 0.01 0.02 0.03 0.04 0.05 0.07 0.08 0.11 0.15 0.19 0.24 0.29 0.35 0.41 0.47 0.54 0.61 0.82 1.05 1.3 0.12 0.21 0.32 0.45 0.69 0.76 0.95 1.15 1.61 2.14 2.74 3.41 4.14 4.94 5.8 6.73 7.72 8.77 11.66 14.93 18.57 1 1/4 in 35.052 (kg/cm2) (psi) 0.01 0.01 0.01 0.01 0.02 0.02 0.03 0.04 0.05 0.08 0.07 0.09 0.1 0.12 0.14 0.16 0.21 0.27 0.33 0.4 0.48 0.56 0.65 0.75 0.85 0.96 1.07 1.19 1.32 1.45 0.08 0.11 0.15 0.19 0.24 0.29 0.41 0.54 0.7 0.87 1.05 1.25 1.47 1.71 1.96 2.23 2.96 3.79 4.71 5.73 6.63 8.02 9.3 10.67 12.12 13.66 15.28 16.99 18.77 20.64 1 1/2 in 40.894 (kg/cm2) (psi) 0.01 0.01 0.01 0.01 0.02 0.02 0.03 0.03 0.04 0.05 0.06 0.06 0.07 0.1 0.12 0.15 0.19 0.22 0.26 0.3 0.35 0.39 0.44 0.5 0.55 0.61 0.67 1.42 0.09 0.11 0.13 0.19 0.25 0.32 0.4 0.49 0.58 0.69 0.79 0.91 1.03 1.37 1.75 2.18 2.65 3.16 3.71 4.3 4.94 5.61 6.32 7.07 7.86 8.69 9.56 20.22 31 Shop Air Piping Layout Refrigerated Air Dryer & Dryaire System Layout Main Air Line 1 in. Pipe Minimum A Dryaire Membrane or Desiccant Air Drying system at Paint Booth Air Control Unit or Air Filter Union Compressor Oil Coalescer 15 f t to Flexible Hose between Compressor and Main Air Line B Air In 20 f Drain Leg C Air Out Air Filter t Dryaire Membrane Ball Valve Refrigerated Air Dryer D Dryaire Desiccant E Ref. Letter Description Model No. A Sharpe 606 U06710 Sharpe 606A U06720 Sharpe 606B 6730 Sharpe 880A 6950 Sharpe F88 8130 707C 6930 707F 6920 707FC 6910 C Dryaire Membrane 6770 D Dryaire Desiccant 6760 E Refrigerated Air Dryer Dryaire Desiccant System S OP A B RECOM SLOPE S DOW N AND M MAIN LINE PIPE SIZE 3/4 IN. MINIMUM 1-1/4 IN. OPTIMUM AWAY (Coppe ENDED 4 r or ga lvanizedINCH DRO P pipe is recom IN 50 FE mende ET d) FOR PREP AREA 707FC FILTER & COALESCER WITH AUTO DRAINS UNION A MINIMUM OF 25 FT. TO FIRST OUTLET IS REQUIRED TO COOL AIR (50 FT. OPTIMUM) BALL VALVE DRAIN LEG UNION DRYAIRE DESICCANT SYSTEM 606A THE MAIN AIR LINE STAND PIPE SHOULD NOT BE SMALLER THAN THE COMPRESSOR OUTLET SIZE AIR CONTROL UNIT OR AIR FILTER AIR HOSE SIZE 5/16 MINIMUM 3/8 OPTIMUM BALL VALVE DRAIN DAILY BALL VALVE UNION DRAIN AIR COMPRESSOR DAILY IN THE A.M. FLEXIBLE HOSE BETWEEN COMPRESSOR & STAND PIPE 32 www.sharpe1.com • 1-800-742-7731 BALL VALVE DRAIN DAILY BALL VALVE DRAIN DAILY 25CFM 6880 35CFM 6885 50CFM 6890 75CFM 6895 REFERENCE RAZOR Replacement Parts Quick Reference RAZOR Gravity Feed Guns Part Number Spray Type 253432 253433 253434 253435 289388 289389 289571 289214 289215 289216 253427 253428 253429 253441 253442 253443 288654 253444 289390 289391 289572 288281 289839 253437 253438 253439 24B233 HVLP HVLP HVLP HVLP HVLP, Waterborne HVLP, Waterborne HVLP, Waterborne HVLP, Metallic HVLP, Metallic HVLP, Metallic LVLP LVLP LVLP Compliant Compliant Compliant Compliant Compliant Compliant, Waterborne Compliant, Waterborne Compliant, Waterborne Conventional HVLP, Primer HVLP, Primer HVLP, Primer HVLP, Primer HVLP, Primer Max HVLP/Comp Pressure psi (MPa, bar) 29 (0.2, 2.0) 29 (0.2, 2.0) 29 (0.2, 2.0) 29 (0.2, 2.0) 26 (0.18, 1.8) 26 (0.18, 1.8) 26 (0.18, 1.8) 29 (0.2, 2.0) 29 (0.2, 2.0) 29 (0.2, 2.0) 16 (0.1, 1.1) 16 (0.1, 1.1) 16 (0.1, 1.1) 35 (0.24, 2.4) 35 (0.24, 2.4) 35 (0.24, 2.4) 35 (0.24, 2.4) 35 (0.24, 2.4) 35 (0.24, 2.4) 35 (0.24, 2.4) 35 (0.24, 2.4) N/A 29 (0.2, 2.0) 29 (0.2, 2.0) 29 (0.2, 2.0) 29 (0.2, 2.0) 29 (0.2, 2.0) Nozzle (mm) Aircap Nozzle Needle Assy Needle Tip 1.2 1.3 1.4 1.5 1.2 1.3 1.4 1.3 1.4 1.5 1.3 1.4 1.5 1.2 1.3 1.4 1.5 1.6 1.2 1.3 1.4 1.4 1.3 1.5 1.8 2.3 2.5 253824 253824 253824 253824 289374 289375 289375 289212 289212 289212 253823 253823 253823 253825 253825 253825 253825 253825 289376 289377 289377 288451 253828 253828 253828 253829 253829 253793 253794 253795 253796 289380 289381 289561 253794 253795 253796 253803 253804 253805 253817 253818 253819 288653 253820 289382 289383 289562 288297 289841 253789 253790 253791 24B235 253771 253771 253772 253772 253771 253771 253771 253771 253772 253772 253771 253772 253772 253771 253771 253771 253772 253772 253771 253771 253771 253771 253771 253772 253772 253774 253775 288752 288752 253917 253917 288752 288752 288752 288752 253917 253917 288752 253917 253917 288752 288752 288752 253917 253917 288752 288752 288752 288752 288752 253917 253917 234779 234780 Nozzle (mm) Aircap Nozzle Needle Assy Needle Tip 2.2 2.2 1.2 1.3 1.4 1.8 1.5 1.8 2 2.5 253827 253827 288454 288454 288454 288454 288455 288455 288456 288457 253778 253778 288302 288303 288304 288306 288307 288308 288309 288310 253777 253777 288641 288641 288642 288643 288642 288642 253777 253777 234779 234779 234778 234778 288752 253917 288752 288752 234779 234779 Aircap with Retaining Ring 289501 289501 289501 289501 289599 289600 289600 289514 289514 289514 289500 289500 289500 289502 289502 289502 289502 289502 289601 289602 289602 289507 289505 289505 289505 289506 289506 RAZOR Siphon Feed Guns Part Number Spray Type 287961 289231 288286 288287 288288 288290 288291 288292 288293 288294 HVLP HVLP Compliant Compliant Compliant Compliant Conventional Conventional Conventional Conventional Max HVLP/Comp Pressure psi (MPa, bar) 30 (0.21, 2.1) 30 (0.21, 2.1) 35 (0.24, 2.4) 35 (0.24, 2.4) 35 (0.24, 2.4) 35 (0.24, 2.4) Aircap with Retaining Ring 289504 289504 289510 289510 289510 289510 289511 289511 289512 289513 www.sharpe1.com • 1-800-742-7731 33 REFERENCE RAZOR Replacement Parts Quick Reference RAZOR Pressure Feed Guns Replacement Part Number Spray Type 24A525 24A526 24A527 24A528 24A529 24A530 24A531 24A532 24A533 289232 HVLP HVLP HVLP Compliant Compliant Compliant Conventional Conventional Conventional HVLP Max HVLP/ Comp Pressure psi (MPa, bar) 29 (0.2, 2.0) 29 (0.2, 2.0) 29 (0.2, 2.0) 35 (0.24, 2.4) 35 (0.24, 2.4) 35 (0.24, 2.4) N/A N/A N/A 29 (0.2, 2.0) Max Fluid Working Pressure psi (MPa, bar) 300 (2.1, 21) 300 (2.1, 21) 300 (2.1, 21) 300(2.1, 21) 300 (2.1, 21) 300 (2.1, 21) 300 (2.1, 21) 300 (2.1, 21) 300 (2.1, 21) 300 (2.1, 21) Nozzle (mm) Aircap Nozzle Needle Assy Needle Tip 1 1.2 1.4 1 1.2 1.4 1.2 1.4 1.8 1.2 253824 253824 253824 253825 253825 253825 288451 288451 288452 253824 253792 253793 253795 253816 253817 253819 288295 288297 288299 253793 253769 253771 253772 253769 253771 253771 253772 253771 253772 288641 288751 288752 253917 288751 288752 288752 253917 288752 253917 234778 Aircap with Retaining Ring 289501 289501 289501 289502 289502 289502 289507 289507 289508 289501 RAZOR Replacement for Titanium Titanium RAZOR RAZOR RAZOR Feed Part Numbers Part Numbers Nozzle Size (mm) Spray Type System 4012 253432 1.2 HVLP Gravity 4013 253433 1.3 HVLP Gravity 4014 253434 1.4 HVLP Gravity 4015 253435 1.5 HVLP Gravity 4016* 253435 or 253436 1.5 / 1.7 HVLP Gravity 4017 253436 1.7 HVLP Gravity 4212 253441 1.2 Compliant Gravity 4213 253442 1.3 Compliant Gravity 4214 253443 1.4 Compliant Gravity 4215 288654 1.5 Compliant Gravity 4216 253444 1.6 Compliant Gravity 4217** 253444 1.6 Compliant Gravity 5485 287961 2.2 HVLP Siphon * RAZOR HVLP not offered in a 1.6 mm. We offer a 1.5 mm (253435) or a 1.7 mm (253436) ** RAZOR Compliant not offered in a 1.7 mm. We offer a 1.6 mm. Cross Reference Need to replace your Titanium or Cobalt guns? Simply determine the gun family, select the appropriate part number and then find the RAZOR part number reference. This is a suggested RAZOR alternative and is not an implied guarantee of the acceptability of the gun in all applications. RAZOR Replacement for Cobalt Cobalt Part Numbers 5222* 5224* 5235 5250** 5712 5714 5716 5812 5814 5815 5816*** 5818 5823 RAZOR Part Numbers 288291 288291 288292 288294 253441 253443 253444 253432 253434 253437 253435 or 253436 253438 253439 RAZOR Nozzle Size (mm) 1.5 1.5 1.8 2.5 1.2 1.4 1.6 1.2 1.4 1.5 1.5 / 1.7 1.8 2.3 RAZOR Spray Type Conventional Conventional Conventional Conventional Compliant Compliant Compliant HVLP HVLP HVLP Primer HVLP HVLP Primer HVLP Primer Feed System Siphon Siphon Siphon Siphon Gravity Gravity Gravity Gravity Gravity Gravity Gravity Gravity Gravity 5866 287961 2.2 HVLP Siphon * RAZOR Conventional not offered in a 1.4 mm but 1.5 mm is offered. ** RAZOR Conventional not offered in a 2.3 mm but 2.5 mm is offered. *** RAZOR HVLP not offered in a 1.6 mm but 1.5 mm (253435) or a 1.7 mm (253436) is offered. 34 REFERENCE SPRAY GUN REFERENCE GUIDE RAZOR HVLP RAZOR Compliant RAZOR HVLP-Siphon RAZOR CompliantSiphon RAZOR LVLP Nozzle Size mm 1.5 1.4 2.2 1.6-1.8 1.3-1.4 Gun PN 253437 (1.5 mm) 253443 (1.4 mm) 287961 (2.2 mm) 288289 (1.6 mm) 288290 (1.8 mm) 253427 (1.3 mm) 253428 (1.4 mm) Nozzle PN 253789 (1.5 mm) 253819 (1.4 mm) 253778 (2.2 mm) 288305 (1.6 mm) 288306 (1.8 mm) 253803 (1.3 mm) 253804 (1.4 mm) Aircap PN 253828 253825 253827 288454 253823 RAZOR HVLP Waterborne RAZOR Compliant Waterborne Primers & Sealers Primer Surface Nozzle Size mm 1.5 - 1.8 1.4-1.6 2.2 1.6-1.8 1.3-1.4 Gun PN 253437 (1.5 mm) 253438 (1.8 mm) 253443 (1.4 mm) 288654 (1.5 mm) 253444 (1.6 mm) 287961 (2.2 mm) 288289 (1.6 mm) 288290 (1.8 mm) 253427 (1.3 mm) 253428 (1.4 mm) Nozzle PN 253789 (1.5 mm) 253790 (1.8 mm) 253819 (1.4 mm) 288653 (1.5 mm) 253820 (1.6 mm) 253778 (2.2 mm) 288305 (1.6 mm) 288306 (1.8 mm) 253803 (1.3 mm) 253804 (1.4 mm) Aircap PN 253828 253825 253827 288454 253823 Single Stage Urethane and Polyurethanes Nozzle Size mm 1.2-1.5 1.3-1.5 2.2 1.6-1.8 1.4-1.5 Gun PN 253432 (1.2 mm) 253433 (1.3 mm) 253434 (1.4 mm) 253435 (1.5 mm) 253442 (1.3 mm) 253443 (1.4 mm) 288654 (1.5 mm) 287961 (2.2 mm) 288289 (1.6 mm) 288290 (1.8 mm) 253428 (1.4 mm) 253429 (1.5 mm) Nozzle PN 253793 (1.2 mm) 253794 (1.3 mm) 253795 (1.4 mm) 253796 (1.5 mm) 253818 (1.3 mm) 253819 (1.4 mm) 288653 (1.5 mm) 253778 (2.2 mm) 288305 (1.6 mm) 288306 (1.8 mm) 253804 (1.4 mm) 253805 (1.5 mm) Aircap PN 253824 253825 253827 288454 253823 Nozzle Size mm 1.2-1.5 1.2-1.4 2.2 1.4-1.8 1.3-1.5 1.2-1.3 1.2-1.3 Gun PN 253432 (1.2 mm) 253433 (1.3 mm) 253434 (1.4 mm) 253435 (1.5 mm) 253441 (1.2 mm) 253442 (1.3 mm) 253443 (1.4 mm) 287961 (2.2 mm) 288288 (1.4 mm) 288289 (1.6 mm) 288290 (1.8 mm) 253427 (1.3 mm) 253428 (1.4 mm) 253429 (1.5 mm) 289388 (1.2 mm) 289389 (1.3 mm) 289390 (1.2 mm) 289391 (1.3 mm) Nozzle PN 253793 (1.2 mm) 253794 (1.3 mm) 253795 (1.4 mm) 253796 (1.5 mm) 253817 (1.2 mm) 253818 (1.3 mm) 253819 (1.4 mm) 253778 (2.2 mm) 288304 (1.4 mm) 288305 (1.6 mm) 288306 (1.8 mm) 253803 (1.3 mm) 253804 (1.4 mm) 253805 (1.5 mm) 289390 (1.2 mm) 289381 (1.3 mm) 289382 (1.2 mm) 289383 (1.3 mm) Aircap PN 253824 253825 253827 288454 253823 289374 (1.2 mm) 289375 (1.3 mm) 289376 (1.2 mm) 289377 (1.3 mm) Nozzle Size mm 1.2-1.5 1.2-1.4 2.2 1.6-1.8 1.3-1.5 Gun PN 253432 (1.2 mm) 253433 (1.3 mm) 253434 (1.4 mm) 253435 (1.5 mm) 253441 (1.2 mm) 253442 (1.3 mm) 253443 (1.4 mm) 287961 (2.2 mm) 288289 (1.6 mm) 288290 (1.8 mm) 253427 (1.3 mm) 253428 (1.4 mm) 253429 (1.5 mm) Nozzle PN 253793 (1.2 mm) 253794 (1.3 mm) 253795 (1.4 mm) 253796 (1.5 mm) 253817 (1.2 mm) 253818 (1.3 mm) 253819 (1.4 mm) 253778 (2.2 mm) 288305 (1.6 mm) 288306 (1.8 mm) 253803 (1.3 mm) 253804 (1.4 mm) 253805 (1.5 mm) Aircap PN 253824 253825 253827 288454 253823 Base Coat Clear Coat www.sharpe1.com • 1-800-742-7731 35 REFERENCE SPRAY GUN REFERENCE GUIDE D-5-55 FINEX FX1000 FINEX FX2000 FINEX FX3000 MGF HVLP MPF HVLP Nozzle Size mm 1.4 1.4 1.4 1.5 1.4 1.1 Gun PN 7030 (1.4 mm) 289222 (1.4 mm) 288885 (1.4 mm) 288881 (1.5 mm) 7040 (1.4 mm) 7045 (1.1 mm) Nozzle PN 29021 (1.4 mm) 289290 (1.4 mm) 289293 (1.4 mm) 289299 (1.5 mm) 29021 (1.4 mm) 34811 (1.1 mm) Aircap PN 29006 Kit Kit Kit 34806 34808 Primers & Sealers Primer Surface Nozzle Size mm 1.4 1.8 1.5-1.8 Gun PN 289222 (1.4 mm) 288887 (1.8 mm) 288881 (1.5 mm) 288882 (1.8 mm) Nozzle PN 289290 (1.4 mm) 289295 (1.8 mm) 289299 (1.5 mm) 289300 (1.8 mm) Aircap PN Kit Kit Kit Single Stage Urethane and Polyurethanes Nozzle Size mm 1.2-1.4 1.4 1.3-1.5 1.1 Gun PN 289221 (1.2 mm) 289222 (1.4 mm) 288885 (1.4 mm) 288879 (1.3 mm) 288880 (1.4 mm) 288881 (1.5 mm) 7045 (1.1 mm) Nozzle PN 289289 (1.2 mm) 289290 (1.4 mm) 289293 (1.4 mm) 289297 (1.3 mm) 289298 (1.5 mm) 289299 (1.8 mm) 34811 (1.1 mm) Aircap PN Kit Kit Kit 34808 Base Coat Nozzle Size mm 1.4 1.2-1.4 1.4 1.3-1.5 1.4 1.1 Gun PN 7030 (1.4 mm) 289221 (1.2 mm) 289222 (1.4 mm) 288885 (1.4 mm) 288879 (1.3 mm) 288880 (1.4 mm) 288881 (1.5 mm) 7040 (1.4 mm) 7045 (1.1 mm) Nozzle PN 29021 (1.4 mm) 289289 (1.2 mm) 289290 (1.4 mm) 289293 (1.4 mm) 289297 (1.3 mm) 289298 (1.5 mm) 289299 (1.8 mm) 29021 (1.4 mm) 34811 (1.1 mm) Aircap PN 29006 Kit Kit Kit 34806 34808 Nozzle Size mm 1.4 1.2-1.4 1.4 1.3-1.5 1.4 1.1 Gun PN 7030 (1.4 mm) 289221 (1.2 mm) 289222 (1.4 mm) 288885 (1.4 mm) 288879 (1.3 mm) 288880 (1.4 mm) 288881 (1.5 mm) 7040 (1.4 mm) 7045 (1.1 mm) Nozzle PN 29021 (1.4 mm) 289289 (1.2 mm) 289290 (1.4 mm) 289293 (1.4 mm) 289297 (1.3 mm) 289298 (1.5 mm) 289299 (1.8 mm) 29021 (1.4 mm) 34811 (1.1 mm) Aircap PN 29006 Kit Kit Kit 34806 34808 Clear Coat 36 www.sharpe1.com • 1-800-742-7731 REFERENCE SPRAY GUN REFERENCE GUIDE Obsolete Obsolete Obsolete Obsolete Obsolete Obsolete Obsolete Obsolete FINEX 100 FINEX 200 FINEX 300 Titanium Titanium CG Titanium Siphon Titanium Pressure Cobalt Nozzle Size mm 1.4 1.5 1.4-1.5 1.4-1.6 1.2 1.5-1.8 Gun PN 248753 (1.4 mm) 248757 (1.5 mm) 4014 (1.4 mm) 4015 (1.5 mm) 4214 (1.4 mm) 4216 (1.6 mm) 5462 (1.2 mm) 5815L (1.5 mm) 5818L (1.8 mm) Nozzle PN 15E424 (1.4 mm) 15E452 (1.5 mm) 41114 (1.4 mm) 41115 (1.5 mm) 41114 (1.4 mm) 41116 (1.6 mm) 41112 (1.2 mm) 28115 (1.5 mm) 28188 (1.8 mm) Aircap PN 15E423 15E450 41014 (1.4 mm) 41015 (1.5 mm) 41012 41020 28015 Primers & Sealers Primer Surface Nozzle Size mm 1.8 1.5-1.8 1.6 1.2 1.8-2.3 Gun PN 248754 (1.8 mm) 248757 (1.5 mm) 248758 (1.8 mm) 4216 (1.6 mm) 5462 (1.2 mm) 28188 (1.8 mm) 28123 (2.3 mm) Nozzle PN 15E425 (1.8 mm) 15E452 (1.5 mm) 15E425 (1.8 mm) 41116 (1.6 mm) 41112 (1.2 mm) 28015 Aircap PN 15E423 15E450 41012 41020 Single Stage Urethane and Polyurethanes Nozzle Size mm 1.4 1.3-1.5 1.5 1.6 0.8-1.2 1.6 Gun PN 248753 (1.4 mm) 248755 (1.3 mm) 248756 (1.4 mm) 248757 (1.5 mm) 4015 (1.5 mm) 4216 (1.6 mm) 5460 (0.8 mm) 5462 (1.2 mm) 5816L (1.6 mm) Nozzle PN 15E424 (1.4 mm) 15E451 (1.3 mm) 41115 (1.5 mm) 15E424 (1.4 mm) 15E452 (1.5 mm) 41116 (1.6 mm) 41108 (0.8 mm) 41112 (1.2 mm) 28116 (1.6 mm) Aircap PN 15E423 15E450 41012 41020 28012 41015 (1.5 mm) Base Coat Nozzle Size mm 1.0 1.4 1.3-1.5 1.3-1.4 1.4-1.6 2.2 0.8-1.2 1.4-1.6 Gun PN 248752 (1.0 mm) 248753 (1.4 mm) 248755 (1.3 mm) 248756 (1.4 mm) 248757 (1.5 mm) 4013 (1.3 mm) 4014 (1.4 mm) 4214 (1.4 mm) 4216 (1.6 mm) 5485 (2.2 mm) 5460 (0.8 mm) 5490 (1.2 mm) 5418L (1.4 mm) 5816L (1.6 mm) Nozzle PN 15E393 (1.0 mm) 15E424 (1.4 mm) 15E451 (1.3 mm) 41113 (1.3 mm) 15E424 (1.4 mm) 41114 (1.4 mm) 15E452 (1.5 mm) 41114 (1.4 mm) 41116 (1.6 mm) 41119 (2.2 mm) 41108 (0.8 mm) 41112 (1.2 mm) 28114 (1.4 mm) 28116 (1.6 mm) Aircap PN 15E392 15E423 15E450 41013 (1.3 mm) 41014 (1.4 mm) 41012 41022 41020 28012 Nozzle Size mm 1.0 1.4 1.3-1.5 1.3-1.4 1.4-1.6 0.8 1.4-1.6 Gun PN 248752 (1.0 mm) 248753 (1.4 mm) 248755 (1.3 mm) 248756 (1.4 mm) 248757 (1.5 mm) 4013 (1.3 mm) 4014 (1.4 mm) 4214 (1.4 mm) 4216 (1.6 mm) 5460 (0.8 mm) 5418L (1.4 mm) 5816L (1.6 mm) Nozzle PN 15E393 (1.0 mm) 15E424 (1.4 mm) 15E451 (1.3 mm) 41113 (1.3 mm) 15E424 (1.4 mm) 41114 (1.4 mm) 15E452 (1.5 mm) 41114 (1.4 mm) 41116 (1.6 mm) 41108 (0.8 mm) 28114 (1.4 mm) 28116 (1.6 mm) Aircap PN 15E392 15E423 15E450 41012 41020 28012 Clear Coat 41013 (1.3 mm) 41014 (1.4 mm) www.sharpe1.com • 1-800-742-7731 37 REFERENCE Replacement Parts Drawings Index RAZOR Gravity Feed 7‡ 8 5 6 28*✿ 10 4 8‡ 3 5 9 3*✠ 23** 3 ‡29 9 4 9a 3 *‡22 3 ‡31 *‡6 3 18** 21* 11 1 9 19*◆✓ 13✓ *‡22 17 3 20*◆✓ *†16 2 2 3 4 *†15 3 7 **24 1 8 ^25 30 10 10** 6 14✓ TI8205 1 Pull trigger before installing nozzle (11). 1 1 2 Insert spreader (15) with tapered end facing rear of gun. Insert u-cup (16) with open end facing front of gun. Tirer sur la gâchette avant d’installer la buse (11). Dispare el gatillo antes de instalar la boquilla (11). 2 Insérer l’écarteur (15) avec l’extrémité conique face vers l’arrière du pistolet. Insérer le joint calotte (16) avec la face ouverte face vers l’avant du pistolet. 2 Introduzca el esparcidor (15) con la parte biselada orientada hacia la parte trasera de la pistola. Introduzca la copela en U (16) con el extremo abierto orientado hacia la parte delantera de la pistola. 3 Aplique lubricante. 4 Aplique retén de roscas de poca fuerza. 5 Aplicar producto sellador para roscas. 6 Apriete a un par de 85-90 in-lb. 7 Apriete a un par de 15-20 in-lb. 8 Apriete a un par de 175-185 in-lb. 9 Apriete a un par de 155-165 in-lb. 10 Instalar con el conjunto de la válvula completamente girada en sentido antihorario, en la posición más extrema. 3 Apply lubricant. 4 Apply low strength thread retainer. 3 Enduire de lubrifiant. 5 Apply thread sealant. 4 6 Torque to 85-90 in-lb. Appliquer un fixateur pour filetages léger. 7 Torque to 15-20 in-lb. 5 Appliquer un produit d’étanchéité. 8 Torque to 175-185 in-lb. 6 Serrer à 85-90 in–lb. 9 Torque to 155-165 in-lb. 7 Serrer à 15-20 in–lb. 10 Install with valve assembly turned fully CCW to outermost position. 8 Serrer à 175-185 in–lb. 9 Serrer à 155-165 in–lb. 10 38 www.sharpe1.com • 1-800-742-7731 A monter avec l’ensemble de vanne tournée à fond dans le sens antihoraire. REFERENCE Replacement Parts Drawings Index Parts / Pièces / Piezas Ref. No. 1 3* 4 Part No. 253971 253973 5 253976 6*‡ 7‡ 8‡ 9 9a 10** 11 13 14 253970 15*† 16*† 17 253972 18** 19*u 20*u 21* 22*‡ 23** 24** 25^ 28*_ 29‡ 30^ 30a 253979 31‡ 32 253974 36*‡ 37 253977 6685 37a 21719 Description BODY, gun GASKET, fluid inlet FITTING, fluid inlet FITTING, fluid inlet (253437-39 only) VALVE, air control, assy VALVE, air, assy NUT KNOB, fluid adjust NEEDLE (includes 9a) TIP, needle TRIGGER NOZZLE (includes 21) Aircap RING, retaining SPREADER, needle packing U-CUP, needle packing NUT, needle packing WASHER, wave O-RING, PTFE WASHER, UHMWPE O-RING, PTFE PACKING, u-cup PIN, trigger NUT, trigger FITTING, air inlet WASHER, UHMWPE (not included on 253437-39) SPRING, fluid PLUG, air inlet VALVE, air inlet adjustment \(sold separately) SPRING, air valve TOOL, gun (not shown) TOOL, seal installation (not shown) CUP, gravity, 650cc (not shown) CUP, gravity, 650cc (not shown, 253437-39 only) FILTER, cup (not shown) Qty. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 * Included in Gun Repair Kit 253783 (purchase separately). ** Included in Trigger Repair Kit 253785 (purchase separately). † Included in Needle Packing Repair Kit 253748 (purchase separately). ‡ Included in Air Valve Repair Kit 253934 (purchase separately). u Included in Aircap Seal Kit 253784 (purchase separately). ^ Included in Air Inlet Fitting Repair Kit 253933 (purchase separately). _ Included in Gasket Kit 289213 (purchase separately). * Compris dans le kit de réparation (253783) du pistolet (à acheter séparément). ** Compris dans le kit de réparation (253785) de la gâchette (à acheter séparément). † Compris dans le kit de réparation (253748) de la garniture du pointeau (à acheter séparément). ‡ Compris dans le kit de réparation (253934) de la vanne d’air (à acheter séparément). u Compris dans le kit (253784) de joint du chapeau d’air (à acheter séparément). ^ Compris dans le kit de réparation (253933) du raccord d’entrée d’air (à acheter séparément). _ Compris dans le kit de joint 289213 (à acheter séparément). * Incluido en el kit de reparación de la pistola 253783 (se adquieren por separado). ** Incluido en el Kit de reparación del gatillo 253785 (se adquiere por separado). 1 1 1 † Incluido en el Kit de reparación de las empaquetaduras de la aguja 253748 (se adquiere por separado). 1 1 1 u 1 1 ‡ Incluido en el Kit de reparación de la válvula neumática 253934 (se adquiere por separado). Incluido en el Kit del sello del cabezal de aire 253784 (se adquiere por separado). ^ Incluido en el Kit de reparación del racor de entrada de aire 253933 (se adquiere por separado). _ Incluído en el kit de juntas 289213 (se adquiere por separado). www.sharpe1.com • 1-800-742-7731 39 REFERENCE Replacement Parts Drawings Index RAZOR Par Siphon / PiècFeed s/ 9 7‡ ‡8 3 8 5 6 10 1 ‡29 4 23** 9a 3 *‡22 3 4 110 3 18** ‡31 *‡6 3 *‡22 3 19*◆✓ 13✓ ^30 3* 2 ^25 9 10** 4 *◆✓20 9 14✓ 30a (sold separately) 10 102 9 1 *†16 *†15 2 8 8 11 2 3 101 21* 17 **24 7 3 6 103 37 105 104 TI8223a 108 106 109 107 1 2 1 trigger Pull trigger before insta lingnozzle nozz e (1 ). Pull before installing (11). e er ( ) w h d Inserta spreader in r ar o (15) gun with Inse tapered u cup ( end 6) i h open end f cing f on o g n. facing rear of gun. Insert u-cup (16) 1 2 3 Apply with open ubr endcant facing front of gun. 3 ce vers arrière du p stol t ns rer le joint Insérer l’extrémité lo te (1 )l écarteur v c l fa (15) ou avec ert face v rs vant du p face stole vers l’arrière du pistolet. conique s2 4 Apply low strength 6 Torqu to 85 90 thread l s retainer. 3 5 to 15-20 in ApplyTorque thread sealant. 4 5 ppli uer un t d éta Enduire deprodu lubrifiant. Appliquer un fixateur pour filetages léger. re 6 Torque to 85-90 in-lb. 5 Appliquer un produit errer à 175 185 in –lbs 7 Torque 10 Ins to al 15-20 wit va vin-lb ass 6 errer à 55-1 5 in –l s 8 Torque to 175-185 in-lb. 7 fond dans le sens in–lb. antiho Serrer à 15-20 9 Torque to 155-165 in-lb. 8 Serrer à 175-185 in–lb. 10 Install with valve assembly turned fully CCW to outermost position. 9 Serrer à 155-165 in–lb. 10 40 www.sharpe1.com • 1-800-742-7731 d’étanchéité. Serrer à 85-90 in–lb. A monter avec l’ensemble de vanne tournée à fond dans le sens antihoraire. re el gati el o antes instalar Dispare gatillodeantes de q ( instalar la boquilla (11). (16) avec la face ouverte face duspistolet. pli u r un fixa vers u l’avant our file ag léger 5 o1 5 s1 Insérer joint calotte nduire d le lubrifiant ly Apply lubricant. q er su sur la la âc gâchette ette avan avant d’installer Tirer d’installer la b ) buse (11). da orientad hacia la parte rase a de Introduzca el esparcidor o Introduzca la copel en (15) U 1 con la parte extremo ab erto orientado a la trasera biselada orientada haciahac la parte a a de la pistola. Introduzca la copela en U (16) ant . conu elri extremo abierto orientado hacia la ue retén de roscas de de la poca fuerz parte delantera pistola. 3 Aplique lubricante. 4 r Aplique de roscas e a un paretén de 15-20 in-lbs. de poca fuerza. 5r e a un ar de 175- 85 n-l s Aplicar producto sellador para roscas. 6 Apriete a un npar de 85-90 in-lb. 7 Apriete a unextrema par de 15-20 in-lb. os ción más 8 Apriete a un par de 175-185 in-lb. 9 Apriete a un par de 155-165 in-lb. 10 Instalar con el conjunto de la válvula completamente girada en sentido antihorario, en la posición más extrema. n e s n i o an o REFERENCE Replacement Parts Drawings Index Parts / Pièces / Piezas Ref. No. Part No. 1 2 27076 3* 4 27075 5 253976 6*‡ 7‡ 8‡ 9 9a 10** 11 133 143 253970 15*† 16*† 17 253972 18** 19*u3 20*u3 21* 22*‡ 23** 24** 25^ 28* 29‡ 30^ 30a 253979 31‡ 32 253974 36*‡ 37 6610 101 6630 102 20989 103 20990 104 21497 105 20996 106 20994 107 20995 108 20485 109 20487 110 20988 Description Qty. BODY, gun 1 LOCK NUT, fluid inlet 1 GASKET, fluid inlet 1 FITTING, fluid inlet 1 VALVE, air control, assy 1 VALVE, air, assy 1 NUT 1 KNOB, fluid adjust 1 NEEDLE (includes 9a) 1 TIP, needle 1 TRIGGER 1 NOZZLE (includes 21) 1 Aircap 1 RING, retaining 1 SPREADER, needle packing 1 U-CUP, needle packing 1 NUT, needle packing 1 WASHER, wave 1 O-RING, PTFE 1 WASHER, UHMWPE 1 O-RING, PTFE 1 PACKING, u-cup 2 PIN, trigger 1 NUT, trigger 1 FITTING, air inlet 1 WASHER, UHMWPE (not shown) 1 SPRING, fluid 1 PLUG, air inlet 1 VALVE, air inlet adjustment (sold separately) 1 SPRING, air valve 1 TOOL, gun (not shown) 1 TOOL, seal installation (not shown) 1 CUP, “No Drip”, siphon, assy 1 CANISTER 1 BRIDGE 1 LEVER 1 LID 1 WASHER; 1.25 dia. 1 GASKET, 3.5 dia. 1 NUT, locking 1 NO-DRIP CUP TUBE 1 NO-DRIP ELBOW 1 FLUID TUBE, assy 1 * Included in Gun Repair Kit 253783 (purchase separately). ** Included in Trigger Repair Kit 253785 (purchase separately). † Included in Needle Packing Repair Kit 253748 (purchase separately). ‡ Included in Air Valve Repair Kit 253934 (purchase separately). u Included in Aircap Seal Kit 253784 (purchase separately). ^ Included in Air Inlet Fitting Repair Kit 253933 (purchase separately). 3 Included in Aircap with Retaining Ring Kit (purchase separately). * Compris dans le kit de réparation (253783) du pistolet (à acheter séparément). ** Compris dans le kit de réparation (253785) de la gâchette (à acheter séparément). † Compris dans le kit de réparation (253748) de la garniture du pointeau (à acheter séparément). ‡ Compris dans le kit de réparation (253934) de la vanne d’air (à acheter séparément). u Compris dans le kit (253784) de joint du chapeau d’air (à acheter séparément). ^ Compris dans le kit de réparation (253933) du raccord d’entrée d’air (à acheter séparément). 3 Compris dans le kit de le chapeau d’air équipée de la bague de retenue (à acheter séparément). * Incluido en el kit de reparación de la pistola 253783 (se adquieren por separado). ** Incluido en el Kit de reparación del gatillo 253785 (se adquiere por separado). † Incluido en el Kit de reparación de las empaquetaduras de la aguja 253748 (se adquiere por separado). ‡ Incluido en el Kit de reparación de la válvula neumática 253934 (se adquiere por separado). u Incluido en el Kit del sello del cabezal de aire 253784 (se adquiere por separado). ^ Incluido en el Kit de reparación del racor de entrada de aire 253933 (se adquiere por separado). 3 Incluído en el kit del cabezal de aire con el anillo de retención (se adquiere por separado). www.sharpe1.com • 1-800-742-7731 41 REFERENCE Replacement Parts Drawings Index Parts PiècesFeed /P RAZOR/Pressure 9 8 7 ‡29 5 10 6 1 4 23** 3 9a 3 *‡22 3 ‡31 18** *‡6 3 *‡22 7 **24 3 2 17 *†16 3 2 *†15 8 ^25 4 3 21* 11 1 9 19*◆ 13 ◆*20 6 30a 10 (sold separately) / (vendu séparément) / (se vende por separado) 1 Pull trigger before installing nozzle (11). 1 2 Insert (15) tapered end( Pul spreader rigger befo e with nsta ling nozzle facing rear of de gun. Insert u-cup (16) I er 5) e e with open end frontt u-cup of gun. fac ng rear o facing gun Inse 2 30^ Tirer sur la gâchette avant d’installer la buse (11). la bus l’écarteur 11). Insérer (15) avec l’extrémité conique vers(15) l’arrière pistolet. Insérer l face écarteur avecdu l extrémité fa e v rs arrière u pisto t Insé l Insérer le joint calotte (16) avec la er face l (16) l f o ouverte l’avant face u pi vers tolet l’avant du pistolet. Apply lubricant. 4 Apply App ylow lo strength strengt thread hreadretainer. reta ne 3 Enduire de de lubrifiant. ubr fiant Enduire 5 App ythread threadsealant. sealan Apply 4 6 orquetot 85-90 8 -90in-lb. in-l Torque Appliquer un fixateur pour filetages léger. 5 Appliquer un produit d’étanchéité. 1 2 lq t 7 Torque to 15-20 in-lb. 6 8 Torque to 175-185 in-lb. Serrer à 85-90 in–lb. 1 0 l 7 Serrer in–lb. Se re àà 15 17520 185 in 9 Torque in-lb. I l to 155-165 h 10 o t Install with valve assembly turned fully CCW to outermost position. p l t g g 98 155 165 in–lb. n.– b Serrer àà 175-185 0 9 A mont av c l e s m Serrer à 155-165 in–lb. f 10 A monter avec l’ensemble de vanne tournée à fond dans le sens antihoraire. 42 www.sharpe1.com • 1-800-742-7731 14 TI10627b 3 l 10** 8 1 Dispare el gatillo antes de instalar la boquilla (11). 2 la boquil a 1 ) Introduzca el esparcidor (15) con la parte biselada orientada hacia la parte trasera Introduzca el esparcidor 15) con la pa o ientada hacia la parteentraU (16) ea deblaselada pistola. Introduzca la copela l i l l p l U ) con el el extremo hacia con e tre abierto o ab er orientado or entado hac la a parte delante de a de a pis o parte delantera la pistola. 3 Apliqueulubricante. 4 Aplique retén de roscas de poca fuerza. 5 Aplicari tproducto sellador para roscas. 85 9 6 Apriete a un parpar dede 85-90 in-lb Apriete a un 15- 0 n- 7 Apriete a un 175 185 Apriete a un parpar dede 15-20 in-lb. 8 pri ta un a par n p de r 175-185 e 1 - in-lb. Apriete 9 Apriete a un par com leta en ede 155-165 ad en in-lb entid 10 Instalar con el conjunto de la válvula completamente girada en sentido antihorario, en la posición más extrema. n jun de l v REFERENCE Replacement Parts Drawings Index Parts / Pièces / Piezas Ref. No. Part No. 1 5 253976 6*‡ 7‡ 8‡ 9 9a 10** 11 13 14 253970 15*† 16*† 17 253972 18** 19*u 20*u 21* 22*‡ 23** 24** 25^ 28* 29‡ 30^ 30a 253979 289142 31‡ 32 253974 36*‡ Description Qty. BODY, gun 1 VALVE, air control, assy 1 VALVE, air, assy 1 NUT 1 VALVE, fluid control 1 NEEDLE (includes 9a) 1 TIP, needle 1 TRIGGER 1 NOZZLE (includes 21) 1 AIRCAP 1 RING, retaining 1 SPREADER, needle packing 1 U-CUP, needle packing 1 NUT, needle packing 1 WASHER, wave 1 O-RING, PTFE 1 WASHER, UHMWPE 1 O-RING, PTFE 1 PACKING, u-cup 2 PIN, trigger 1 NUT, trigger 1 FITTING, air inlet 1 WASHER, UHMWPE (not shown) 1 SPRING, fluid 1 PLUG, air inlet 1 VALVE, air inlet adjustment 1 For 289xxx models For 24Axxx models SPRING, air valve 1 TOOL, gun (not shown) 1 TOOL, seal installation (not shown) 1 * Included in Gun Repair Kit 253783 or 289399 (purchase separately).. ** Trigger repair kits vary by model. † Included in Needle Packing Repair Kit 253748 (purchase separately). ‡ Included in Air Valve Repair Kit 253934 or 289407 (purchase separately). u Included in Aircap Seal Kit 253784 (purchase separately). ^ Included in Air Inlet Fitting Repair Kit 253933 (purchase separately). * Compris dans le kit de réparation (253783) du pistolet (à acheter séparément). ** Kits de réparation de la gâchette varient selon le modèle. † Compris dans le kit de réparation (253748) de la garniture du pointeau (à acheter séparément). ‡ Compris dans le kit de réparation (253934) de la vanne d’air (à acheter séparément). u Compris dans le kit (253784) de joint du chapeau d’air (à acheter séparément). ^ Compris dans le kit de réparation (253933) du raccord d’entrée d’air (à acheter séparément). * Incluido en el kit de reparación de la pistola 253783 (se adquieren por separado). ** Kits de reparación del gatillo varían según el modelo. † Incluido en el Kit de reparación de las empaquetaduras de la aguja 253748 (se adquiere por separado). ‡ Incluido en el Kit de reparación de la válvula neumática 253934 (se adquiere por separado). u Incluido en el Kit del sello del cabezal de aire 253784 (se adquiere por separado). ^ Incluido en el Kit de reparación del racor de entrada de aire 253933 (se adquiere por separado). www.sharpe1.com • 1-800-742-7731 43 REFERENCE rRAZOR s - Model / Pièces Pressure2892 Feed - 3Low Pressure eza Modelo Parts - -Model 289233/2892 Pièces - 3 Modéle 289233 / Piezas - Modelo 289233 111 112 104 113 202 101 204 106 107 201c 201a 102 103 108 105 201b 205 201d 203 110 109 TI10668A Model 6680 Low Pressure Cup / e 6680 Lo Pr s r p Modèle 6680 Réservoir basse pression / è 6680 Ré s Modelo 6680 Taza de baja presión Ref. No. 101 102 103 104 105 106 107 108 109 110 111 112 113 44 40 /M Part No. 20985 20989 20990 21855 20996 20994 20995 21860 6630 9997 21867 21876 21859 Model 1400 Self-Relieving Air Pressure Regulator / od l 400 S lf R l gA Modèle 1400 Régulateur de la pression d’air à essure /egulat r / Mo è e 14 0 autodétente Modelo 1400 Regulador de presión égulateur de la con alivio automático 66 Description TUBE, fluid, assembly BRIDGE LEVER LID WASHER; 1.25 dia. GASKET, 3.5 dia. NUT, locking SHIELD, no drip CANISTER TUBE, pressure FITTING, elbow, pressure inlet VALVE, relief VALVE, check, assembly www.sharpe1.com • 1-800-742-7731 Qty. 1 1 1 1 1 1 1 1 1 1 1 1 1 Ref. No. Part No. 201 119077 201a 9975 201b 9978 201c 9980 201d 202 9995 203 9990 204 8205 205 9993 Description REGULATOR, air Includes items 201a-201d • Bonnet Assembly • Top Spring • Service Kit • Body FITTING, swivel VALVE, safety GAUGE, pressure FITTING, inlet, air regulator Qty. 1 1 1 1 1 1 1 1 REFERENCE Replacement Parts Drawings Index Finex 1000/2000/3000 Series Parts / Pièces / Piezas Parts Ref. No. 1 2 13-1* 23-2* 4* 26 9 10 8-2 24 1 2 7 6 11 20 19 12-2 18 8-1 5 3-1 12-1 4 3-2 15 17 16 13 14 Accessories Description CAP, air NOZZLE script fluid PACKING, AP air fluid needle OZZLE, fl idneedle PACK NG fluid ACKING, NUT, packingl CKI , l 5* KNOB, pattern * UT pac ing adjustment 6* O-RING 5* NOB djustmen 7* GUIDE, fluid needle IN 8-1* GUIDE, fluid adjusting * UIDE fl id ne dle 8-2* KNOB, 1 UIDE fluid flu dadjusting ad us 8NOB d adjust 9* SPRING, ufluid needle RING fluid u 10 NEEDLE, ED E 11* O-RING RING 2 1 ODY gun 12-1 BODY, gun 2 2 IS RIBU O air 12-2* DISTRIBUTOR, TTI G i l 13* FITTING, inlet 4* AL E air ir adj 14* VALVE, air adjustment 5* ING, etaining 6 N, t gger 15* RING, retaining 16* PIN 8* RI trigger G 17* ALV TRIGGERa 0 EA , a air vavalve ve 18* SPRING, 4 IL E , 19* VALVE, air 6 P 20* OO SEAT, air valve 27 gun (n 24* FILTER, fluid (PN 24A230 - 10/pk) 26 CUP, gravity, aluminum 27 TOOL, gun (not shown) Qty. 1 1 11 11 1 11 11 1 1 1 11 11 1 11 11 1 11 12 2 11 11 11 1 11 1 1 1 Model Needle/ Nozzle Size Needle, Nozzle, Aircap Kit (Parts 1, 2, and 10) Needle Packing Kit (parts 3-1, 3-2, and 4) Gun Body Kit (part 12-1) Gun Rebuild Kit (includes parts marked *) Gravity Cup (aluminum) PPS Adapter FX1000 Mini-HVLP 0.6 0.8 1.0 1.2 1.4 1.0 1.3 1.4 1.5 1.8 1.0 1.3 1.4 1.5 1.8 289286 289287 289288 289289 289290 289291 289292 289293 289294 289295 289296 289297 289298 289299 289300 288890 289314 288895 289517 (125 cc) Standard 289520 FX2000 Conventional FX3000 HVLP 288891 289315 288896 288891 289315 288896 289321 (250 cc) 289320 (600 cc) 289320 (600 cc) 289520 289520 www.sharpe1.com • 1-800-742-7731 45 REFERENCE Replacement Parts Drawings Index MGFHVLP Gravity Feed System Parts / Pièces / Piezas 17a 8* 17 13 16 12a 1 15 14 6 12b 5* 9 7 11a 0 % ! 2 3 ( 11 11b 2b* 2c 2a 11c* 2 2d* 11d* 2e* 4* 3 2f* Ref. No. Part No. 1 34801 2 34825 2a 34819 2b* 29049 2c 29053 2d* 29050 2e* 29036 2f* 34823 3 29033 4* 26022 5* 29047 6 29036 7 29046 8* 29056 9 29055 11 29030 11a 118749 11b 118741 11c* 29028 11d* 29029 Description Gun Body 1 Air Valve Assembly Includes items 2a-2f • Housing • Air Valve Stem • Lock Nut • Ball • Needle Spring • Retainer Needle Packing Nut Needle Packing Plunger Needle Spring Fluid Control Knob Trigger Screw Trigger Width Control Assembly Includes items 11a-11d • Knob • Packing Nut • Packing • Retaining Ring 46 www.sharpe1.com • 1-800-742-7731 Qty. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Ref. No. Part No. 12 119288 12a 29021 12b 29041 13 34806 14 34831 15 34830 16 34832 17 U07505 17a 34800 Description Fluid Needle Assembly Includes items 12a-12b • Fluid Nozzle • Fluid Needle Aircap Fluid Gasket Fluid Inlet Fitting 90° Street Elbow Gravity Cup; Includes item 17a • Cup Lid * Parts included in Repair Kit 34835. Qty. 1 1 1 1 1 1 1 1 1 REFERENCE Replacement Parts Drawings Index MPFHVLP Spray Gun Parts / Pièces / Piezas 13 12a 8* 1 6 12b 7 5* 11a 11 2b* 2c 2a 11b 2 2d* 11c* 4* 11d* Ref. No. Part No. 1 34802 2 34825 2a 34819 2b* 29049 2c 29053 2d* 29050 2e* 29036 2f* 34823 3 29033 4* 26022 5* 29047 6 29036 7 29046 8* 29056 9 29055 11 29030 11a 118749 11b 118741 11c* 29028 11d* 29029 9 Description Gun Body Air Valve Assembly Includes items 2a-2f • Housing • Air Valve Stem • Lock Nut • Ball • Needle Spring • Retainer Needle Packing Nut Needle Packing Plunger Needle Spring 1 Fluid Control Knob 1 Trigger Screw 1 Trigger 1 Width Control Assembly Includes items 11a-11d • Knob • Packing Nut • Packing • Retaining Ring 2e* 3 2f* Qty. 1 1 1 1 1 Ref. No. Part No. 12 118956 12a 34811 12b 29040 13 34808 Description Fluid Needle Assembly Includes items 12a-12b • Fluid Nozzle • Fluid Needle Aircap Qty. 1 1 1 1 * Parts included in Repair Kit 34835. 1 1 1 1 1 1 1 1 1 1 www.sharpe1.com • 1-800-742-7731 47 REFERENCE Replacement Parts Drawings Index D-5-55 Detail Spray Gun 8* Parts / Pièces / Piezas 13 12 9 1 6* 11 10a 10 7 5* 2b* 2c 2a 10b 2 2d* 10c* 4* 10d* 2e* 3 2f* 105 104 103 102 Part No. 7030, D-5-55 Detail Spray Gun Ref. No. Part No. Description 1 29001 Gun Body 2 29054 Air Valve Assembly Includes items 2a-2f 2a 34819 • Housing 2b* 29049 • Air Valve Stem 2c 29053 • Lock Nut 2d* 29050 • Ball 2e* 29036 • Needle Spring 2f* 29052 • Retainer 3 29033 Needle Packing Nut 4* 26022 Needle Packing 5* 29047 Plunger 6* 29036 Needle Spring 7 29046 Fluid Control Knob 8* 29056 Trigger Screw 9 29055 Trigger 10 29030 Width Control Assembly Includes items 10a-10d 48 www.sharpe1.com • 1-800-742-7731 101 R f Qty. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Ref. No. Part No. Description 10a 118749 • Knob 10b 118741 • Packing Nut 10c* 29028 • Packing 10d* 29029 • Retaining Ring 11 29041 Fluid Needle 12 29021 Fluid Nozzle, 0.55 13 29006 Aircap * Parts included in Repair Kit 29086. Part No. U07510, D-500 Cup Assembly Ref. No. Part No. Description 101 U07530 Cup with air-tight cover 102 29063 Gasket, pack of 5 103 29062 Lid with Fluid Tube 104 29057 Coupling Nut 105 29058 Nipple Fitting Qty. 1 1 1 1 1 1 1 Qty. 1 1 1 1 1 REFERENCE Replacement Parts Drawings Index Model 575 Low Pressure Cup Parts / Pièces / Piezas MODEL 575 LOW PRESSURE CUP PART NO. 6680 20988 6630 20989 20990 21867 20996 21876 9997 21855 21859 20994 20988 21860 Part No. 9997 20988 20989 20990 20994 20995 20996 6630 21855 21859 21860 21867 21876 Description Pressure Tube Fluid Assembly (Includes Nut Stem And Tube) Bridge Lever Gasket Lock Nut Thrust Washer Canister Lid Check Valve Assembly “No Drip” Shield Pressure Inlet Fitting Relief Valve Assembly www.sharpe1.com • 1-800-742-7731 49 REFERENCE Model 24A555 Parts / Pièces / Piezas 9a 9b 9c 9 9d 9c 9c 2 2 1b 1c not visible ti12990a 1 ti12986a Ref. No. Part No. 1 ---- 1a 112077 112078 1b 103996 1c 244953 2 156823 Description BARE PRESSURE TANK, includes items 1a-1c TANK LINER, low density polyethylene (not shown) 5 pack of tank liners 25 pack of tank liners VALVE, pressure relief; 50 psi (350 kPa, 3.5 bar) GASKET, cover, polyethylene (package of 3) UNION, swivel 50 www.sharpe1.com • 1-800-742-7731 Qty. 1 1 1 1 1 1 Ref. No. Part No. 9 U10004 9a 8220 9b 1610 9c 9993 9d 119030 Description REGULATOR ASSEMBLY, includes items 9a-9d) GAUGE, air pressure, 0–100 psi (0 to 700 kPa, 0–7 bar) AIR REGULATOR, see manual 310605 for parts FITTING, air inlet, 1/4 npt x 1/4 npt straight FITTING, reducer, 3/8 npt(m) x 1/4 npt(f) Qty. 1 1 1 3 1 REFERENCE Model 24A557 Parts / Pièces / Piezas 9g 9e 9a 9c 9 9b 9d 2 9c 9f 9h 1b 1c not visible ti12992a 1 2 9c ti12988a Ref. No. Part No. 1 ---- 1a 112077 112078 1b 103996 1c 244953 2 156823 9 U10004 9a 8220 Description Qty. BARE PRESSURE TANK, includes items 1a-1c 1 TANK LINER, low density polyethylene (not shown) 5 pack of tank liners 1 25 pack of tank liners 1 VALVE, pressure relief; 50 psi (350 kPa, 3.5 bar) 1 GASKET, cover, polyethylene (package of 3) 1 UNION, swivel 1 REGULATOR ASSEMBLY, includes items 9a-9h) 1 GAUGE, air pressure, 0–100 psi (0-700 kPa, 0–7 bar) 1 Ref. No. Part No. 9b 1610 9c 9993 Description AIR REGULATOR, see manual 310605 for parts FITTING, air inlet, 1/4 npt x 1/4 npt straight 9d 119030 FITTING, reducer, 3/8 npt(m) x 1/4 npt(f) 9e 157350 ADAPTER, 3/8 npt x 1/4 npt 9f 1630 AIR REGULATOR, see manual 310605 for parts 9g 8230 PRESSURE GAUGE 9h 10028 PLUG, regulator Qty. 1 3 1 1 1 1 1 ----- Part is not sold separately. Note: For single regulator use, replace fitting 9e with fitting 9c from regulator 9f. www.sharpe1.com • 1-800-742-7731 51 i REFERENCE Replacement Parts Drawings Index Model 775 Spray Gun Parts / Pièces / Piezas 10332 16100 SEE NOZZLE CHART 25094 10333 10326 16175 16139 16153 25096 24997 34940 16147 16163 16151 25076 16163 25066 25042 25092 16167 24995 16147 16162 34941 25048 SERVICE KIT 25196 Part No. 10326 10332 24995 10333 24997 16100 25032 25036 25042 16139 25048 16147 25066 16151 25074 16153 25076 16162 25092 16163 25032 Description Head Attachment Gasket Fluid Needle Assy Trigger Shaft Air Valve Assembly Trigger Screw Spray Width Adjuster Assy. Tip Gasket Fluid Needle Spring Aircap Gun Handle Gun Head Spray Width Control Packing Trigger Packing Nut Air Valve Air Valve Cage Air Inlet Nipple Head Attachment Screw Material Control Bushing Air Valve Packing Material Control Knob Air Valve Cage Gasket 52 www.sharpe1.com • 1-800-742-7731 25036 25074 SEE NOZZLE CHART 16169 Part No. 25094 16163 25096 16167 34940 16169 34941 16175 Description Spray Width Control Knob & Valve Mat. Control Bushing Gasket Spray Width Control Body Air Valve Spring Packing Plug Packing Seal Spray Width Control “E” Clip REFERENCE Replacement Parts Drawings Index Model 6770 Dryaire Membrane Air Drying System Air Filter with Overnight Drain Stage 1 - Part No. 22601 Coalescer with Overnight Drain Stage 2 - Part No. 22605 22650 22638 22647 22645 U23075 22640 22631 22631 push to manually drain (open) Part No. 22631 22632 22638 22640 22645 Description Overnight Drain Mounting Bracket O-Ring Baffle Kit Filter Element push to manually drain (open) Part No. Baffle Fil e 22631 22632 22647 22650 U23075 Description Drain Mounting Bracket O-Ring Pop-up Indicator Repair Kit Coalescer Element tOvernight www.sharpe1.com • 1-800-742-7731 53 REFERENCE Replacement Parts Drawings Index Model 6760 Dryaire Desiccant System Air Filter with Overnight Drain Stage 1 - Part No. 22601 Coalescer with Overnight Drain Stage 2 - Part No. 22602 22650 22647 22638 22655 22645 22640 22631 22631 push to manually drain (open) push to manually drain (open) Part No. 22631 22632 22638 22640 22645 Description Overnight Drain Mounting Bracket O-Ring Baffle Kit Filter Element 54 www.sharpe1.com • 1-800-742-7731 Part No. 22631 22632 22647 22650 22655 Description Overnight Drain Mounting Bracket O-Ring Pop-up Indicator Repair Kit Coalescer Element REFERENCE Replacement Parts Drawings Index Model 6760 Dryaire Desiccant System Desiccant Housing Stage 3 - Part No. 22603 Self-Relieving Air Regulator Part No. 22604 22682 22665 22665 22664 22664 22663 22661 g AIR s c REGULATOR ng c r ( (22604) 22685 22680 22679 AIR PRESSURE GAUGE (8230) PLUG P T. k(10028) F PT (3 22667 ( NIPPLE S lic (22687) Flow Tube Assembly (Includes: flow tube, nut, O-ring, filter elements and retainers) Part No. Description 6765-1 5 lb Desiccant 22661 Flow Tube Assy 22663 O-Ring 22664 Gasket 22665 O-Ring 22667 Filter Element (2) 22670 O-Ring 22679 Sight Glass 22670 Color Blue when fresh Pink when saturated OUTLET VALVE Cl(34700) ar Specifications sc i n AirD Inlet 3/8 in F.P.T. 26 2 em um Silic 1/4 Ge in c F.P.T. balt c (3 or de Air Outlet EA.)e u ca o l h e ( 22687 3/8 in Air cfm (2.8 m3/min) ns Flow Capacity 100 3 7 Outlet l e ow T e Assy Max. Operating Pressure 160 psi (1.1 MPa, 11 bar) R asket Max. Temperature 150°F (65°C) t Part Ring No. ght Gla 8320 10028 22680 22682 22685 22687 34700 Description Air Pressure Gauge Plug Diaphragm/Valve Repair Kit T-Handle Adjusting Screw Bottom Spring 3/8 in x 3/8 in Nipple Outlet Valve www.sharpe1.com • 1-800-742-7731 55 REFERENCE Replacement Parts Drawings Index Model 705FC Air Filter with Overnight Drain Stage 1 - Part No. 22601 Coalescer with Overnight Drain Stage 2 - Part No. 22605 Pop-up Indicator (22650) O-Ring (22638) O-Ring (22647) Coalesce Element (U23075) Filter Element (22645) Baffle Kit (22640) Overnight Drain (22631) Part No. 22631 22638 22640 22645 Description Overnight Drain O-Ring Baffle Kit Filter Element 56 www.sharpe1.com • 1-800-742-7731 Overnigh Drain (22631) Part No. 22631 22632 22647 22650 U23075 Description Overnight Drain Mounting Bracket O-Ring Pop-up Indicator Repair Kit Coalescer Element REFERENCE Replacement Parts Drawings Index F88 Air Filter Part No. 8130 22026 U32702 10028 U32708 32709 U32718 32701 U 32719 22033 34449 32721 22035 Maximum Working Pressure: 160 psi (1.1 MPa, 11 bar) Part No. 10028 1 2 22026 8 22033 22035 8 U32701 9 U32702 U32708 32709 U32718 U32719 , 32721 34449 Description Plug Bottl Top Cap Screw t Assembly Rod Was Nut Filter Bottle le n Filter Top Gasket Filter Washer Shield Filter Element Retainer Drain Cock www.sharpe1.com • 1-800-742-7731 57 REFERENCE Replacement Parts Drawings Index 880A Air Control Unit Part No. 6950 Air Regulator Part No. 1610 2 Regulated Outlets 1 Main Line Outlet (bypass) 32135 10022 32134 10023 0028 F88 8130 10003 10018 34700 1630 10016 10019 10015 33145 U10008 U10005 Part No. 1630 8130 1002 32134 32135 33145 34700 Description Air Regulator Air Filter 8 Plug Nipple Elbow Gauge Air Cock Maximum Working Pressure: 160 psi (1.1 MPa, 11 bar) 58 www.sharpe1.com • 1-800-742-7731 10010 U10006 w 10001 10013 REFERENCE Replacement Parts Drawings Index Model 606 Air Filter Part No. UO6710 18C-3R Air Regulator Part No. 1630 10022 22026 10023 22013 22037 10003 22019 19920 10018 19929 10016 19930 22033 10019 22032 10015 22035 U10008 U10005 22012 10010 U10006 34449 U10002 10013 Part No. 22026 22013 22037 22019 19920 19929 19930 22033 22032 22035 22012 34449 Description Maximum Working Screw Pressure: 160 psi Bottle Lid (1.1 MPa, 11 bar) Plug Gasket Washer Shield Filter Element Rod Assembly Retainer Nut Mach Filter Bottle Air Cock Regulator Valve Part No. 10022 10023 10003 10018 10016 10019 10015 10008 10005 10010 10006 10002 10013 Description Adjusting Screw Screw Bonnet Washer Spring Pressure Spring Vibration Dampener Diaphragm Valve Body Valve Seat Valve Valve Spring Body Brass Screen Maximum Working Pressure: 160 psi (1.1 MPa, 11 bar) 59 REFERENCE Replacement Parts Drawings Index Air Units A Control R CONTRO 8240 22013 22014 32135 22037 22037 32134 32135 34700 10028 32134 U06710 see other side U34606 34700 10028 U06710 see other side 33145 1630 see other side Model 606A 1630 see other side Part No. U06720 Model 606B 33145 Part No. 6730 8230 8240 8230 10028 22014 32134 32134 10028 1630 see other side 34700 34606 34700 U06710 see other side Model 606C Part No. 6740 60 www.sharpe1.com • 1-800-742-7731 1630 see other side REFERENCE Replacement Parts Drawings Index Zephyr Zephy Drying Gun For use with waterborne paints only. Not for use in explosive atmospheres. 175 psi (1.2 MPa, 12 bar) Maximum Working Pressure - Gun 125 psi (0.9 MPa, 9 bar) Maximum Working Pressure - Stand (Includes two guns and one stand) Model 289956 1 1a 1b 1 2 ti12162a Ref. 1 1a 1b* 2 Part No. 289956 289987 ----289957 Description GUN, drying DIFFUSER FILTER STAND, drying gun --- Not sold individually. * Order Kit 289986 for replacement filters, five (5) per pack. ti12164a Kit 289958 (Includes two guns and one stand) www.sharpe1.com • 1-800-742-7731 61 REFERENCE Additional Terms and Conditions of Sale 1. Entire Agreement Except as set forth below, the sale of products in this shipment shall be governed solely and exclusively by the terms and conditions set forth or referenced on this page. Any objection to these terms and conditions must be communicated by sending a letter or other specific written communication to the attention of Sharpe’s Contract Administrator at the address set forth on this page. Accepting or paying for any part of this shipment, or failing to object within 10 days of receipt of any part of this shipment shall constitute conclusive evidence of acceptance. Except as set forth below, the terms set forth on this page hereby cancel and supersede any prior or contemporaneous negotiation or agreements, and any additional or different terms set forth on any purchase order, acknowledgment form, or other written or oral communication conveyed to Sharpe by Buyer are hereby expressly rejected. Notwithstanding the above, in the event that Buyer is operating under a formal Sharpe Distributor, EDI, or systems agreement, Sharpe quotation or Sharpe Policy, any conflicting or supplemental terms and conditions set forth in such formal agreement, quotation or policy shall prevail. 2. Objection to Purchasers Terms Any term or condition of purchaser’s order or other document which is different from, in addition to, or inconsistent with any term or condition of this document is hereby objected to by Sharpe and cannot be binding or effective against Sharpe unless accepted in writing by an officer thereof. 3. Warranty and Disclaimer Sharpe warrants all equipment manufactured by Sharpe and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Sharpe Channel Member to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Sharpe, Sharpe will, for a period represented in the Product Warranty Matrix on the inside back cover, issue credit, repair or replace any part of the equipment determined by Sharpe to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Sharpe’s written recommendations. This warranty does not cover, and Sharpe shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Sharpe component parts. Nor shall Sharpe be liable for malfunction, damage or wear caused by the incompatibility of Sharpe equipment with structures, accessories, equipment or materials not supplied by Sharpe, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Sharpe. 62 www.sharpe1.com • 1-800-742-7731 This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Sharpe Channel Member for verification of the claimed defect. If the claimed defect is verified, Sharpe will issue credit, repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation. THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. Sharpe’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within one year beyond the warranty expiration of the particular product. Except as expressly set out in this warranty, Sharpe makes no representations, warranties or conditions, express or implied or collateral, concerning any goods or services and SHARPE SHALL NOT BE LIABLE IN ANY MANNER FOR any other representation or warranty or condition of any kind, whether express or implied or collateral, or whether arising by operation of law or otherwise, including, but not limited to, WARRANTIES OF MERCHANTABLE QUALITY OR FITNESS FOR A PARTICULAR PURPOSE. In no event will Sharpe be liable for indirect, incidental, special or consequential damages resulting from Sharpe supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Sharpe, or otherwise. 4. Delivery Sharpe shall not be liable for any delay in the production or delivery of any of the products referred to herein if such delay is due to fire, flood, accident, delay in transportation, inability to obtain material, war, embargo, demand or requirement of the Government, labor dispute, and/or any other cause whatsoever beyond the reasonable control of Sharpe. 5. Terms of Payment and Prices Subject to approval and continuation of approval of credit by Sharpe, the terms of payment are 30 days net from date of invoice. In the event Sharpe does not approve credit to the purchaser, or if at any time after approval of credit and before delivery, Sharpe in its sole judgment, decides that the extension of further credit is unjustified, terms of payment shall be those specified by Sharpe, including but not limited to C.O.D. or cash in advance. All payments shall be in the legal currency as stated on the invoice. All prices are subject to exception or change without notice. Pricing errors may be corrected at any time. Sharpe reserves the right to select those qualified distributors to whom it will sell its products for resale. Channel Member minimum billing is set forth in Sharpe price list, exclusive of all non-product charges. 6. Patent Infringement Sharpe agrees to defend purchaser or its customers in any suit brought against them so far as it is based on a claim that any product or part thereof sold by Sharpe under this document infringes a United States patent, but only on the condition that Sharpe is notified promptly in writing of such claim, is given full authority to conduct such defense including the compromise or settlement of any claim, and provided further that purchaser has not prejudiced such defense by any admissions, statements or conduct. Purchaser further agrees to give Sharpe at Sharpe’s expense whatever information, cooperation, assistance and authority Sharpe may reasonably require for such defense. Sharpe will not assume the defense of purchaser or its customers if the infringement is alleged to consist either of the use of the product or part in combination with other devices, and/or of the modification or alteration of the product or part, unless Sharpe shall have specifically recommended such use or modification in its instruction manuals. Purchaser agrees to hold Sharpe harmless against any claim which arises out of Sharpe’s compliance with purchaser’s specifications. In no event will Sharpe be liable for any special, incidental or consequential damages, loss of profits, or loss of revenue resulting from any infringement or alleged infringement. The foregoing states the entire liability of Sharpe for patent infringement. For Sharpe Canadian and Hispanic Customers The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donné intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées. Los participantes confirman que han solicitado que el presente documento, así como todos los documentos, avisos y procesos legales solicitados en, concedidos o instituidos conforme a esto, o relacionados directa o indirectamente a esto, sean redactados en Inglés. INDEX PART NO. PAGE(S) 1-6770-3................................ 17 12AAV.................................... 27 15E422.................................. 25 15E449.................................. 25 15F402................................... 25 15F403................................... 25 15X427.................................. 24 16C-MR.................................. 22 18B-2R................................... 22 18B-500................................. 22 18C-2R................................... 22 18C-3R............................. 21, 57 18C-500................................. 22 24A525.................................. 11 24A526.................................. 11 24A527.................................. 11 24A528.................................. 11 24A529.................................. 11 24A530.................................. 11 24A531.................................. 11 24A532.................................. 11 24A533.................................. 11 24A555............................ 28, 49 24A557............................ 28, 50 24AAV.................................... 27 36AAV-HV............................... 27 606.............................20, 32, 57 606A................................ 21, 32 606B................................ 21, 32 606C...................................... 21 705FC...........................5, 19, 59 707C................................ 19, 32 707F................................. 19, 32 775.................................. 15, 51 880A...........................21, 32, 56 1002...................................... 56 1010...................................... 27 1400...................................... 43 1410...................................... 22 1610...............22, 28, 49, 50, 56 1620...................................... 22 1630...............22, 28, 50, 56, 57 1640...................................... 22 2210................... 2, 4, 6, 8, 9, 27 3310...................................... 27 4012...................................... 33 4013...................................... 33 4014...................................... 33 4015...................................... 33 4016...................................... 33 4017...................................... 33 4212...................................... 33 4213...................................... 33 4214...................................... 33 4215...................................... 33 4216...................................... 33 4217...................................... 33 5222...................................... 33 5224...................................... 33 5235...................................... 33 5250...................................... 33 5485...................................... 33 5712...................................... 33 5714...................................... 33 5716...................................... 33 5812...................................... 33 5814...................................... 33 5815...................................... 33 PART NO. PAGE(S) 5816...................................... 33 5818...................................... 33 5823...................................... 33 5866...................................... 33 6610.....................15, 25, 28, 40 6630...........................40, 43, 48 6680................................ 28, 43 6685................................ 24, 38 6690...................................... 24 6730...................................... 21 6740...................................... 21 6760... 2, 5, 8, 18, 31, 32, 53, 54 6765-1............................. 18, 54 6770..3, 4, 6, 7, 9, 17, 31, 32, 52 6835...................................... 15 6880...................................... 16 6885...................................... 16 6890...................................... 16 6895...................................... 16 6910............... 3, 5, 7, 19, 31, 32 6920...................................... 19 6930...................................... 19 6950................................ 21, 56 7004...................................... 28 7030................................ 14, 47 7040................................ 14, 24 7045...................................... 14 7110.................................. 6, 29 7120...................................... 29 7130................................ 28, 29 7210...................................... 29 7220...................................... 29 7230...................................... 29 7506...................................... 24 7530...................................... 14 8100...................................... 30 8125...................................... 30 8130...........................20, 55, 56 8135...................................... 20 8205...................................... 43 8220................................ 49, 50 8230...................................... 50 8255...................................... 30 8260...........................4, 6, 9, 30 8310...................................... 29 8320................................ 29, 54 8330...................................... 29 8340...................................... 29 9500...................................... 15 9893...................................... 30 9894...................................... 30 9975...................................... 43 9978...................................... 43 9980...................................... 43 9990...................................... 43 9993...........................43, 49, 50 9995...................................... 43 9997................................ 43, 48 10002.................................... 57 10003.................................... 57 10005.................................... 57 10006.................................... 57 10008.................................... 57 10010.................................... 57 10013.................................... 57 10015.................................... 57 10016.................................... 57 10018.................................... 57 PART NO. PAGE(S) 10019.................................... 57 10022.................................... 57 10023.................................... 57 10028.........................50, 54, 55 10326.................................... 51 10332.................................... 51 10333.................................... 51 16100.................................... 51 16111.................................... 15 16139.................................... 51 16147.................................... 51 16151.................................... 51 16153.................................... 51 16162.................................... 51 16163.................................... 51 16167.................................... 51 16169.................................... 51 16175.................................... 51 19920.................................... 57 19929.................................... 57 19930.........................20, 21, 57 20485.................................... 40 20487.................................... 40 20985.................................... 43 20988.............................. 40, 48 20989.........................40, 43, 48 20990.........................40, 43, 48 20994...................28, 40, 43, 48 20995.........................40, 43, 48 20996.........................40, 43, 48 21497.................................... 40 21719.................................... 38 21855.............................. 43, 48 21859.............................. 43, 48 21860.............................. 43, 48 21867.............................. 43, 48 21876.............................. 43, 48 22002.................................... 24 22012.................................... 57 22013.................................... 57 22019.................................... 57 22026.............................. 55, 57 22032.................................... 57 22033.............................. 55, 57 22035.............................. 55, 57 22037.................................... 57 22601.........................52, 53, 59 22602.................................... 53 22603.................................... 54 22604.................................... 54 22605.............................. 52, 59 22631.........................52, 53, 59 22632.........................52, 53, 59 22638.........................52, 53, 59 22640.........................52, 53, 59 22645....... 17, 18, 19, 52, 53, 59 22647.........................52, 53, 59 22650.........................52, 53, 59 22655...................18, 19, 53, 59 22661.................................... 54 22663.................................... 54 22664.................................... 54 22665.................................... 54 22667.................................... 54 22670.................................... 54 22679.................................... 54 22680.................................... 54 22682.................................... 54 PART NO. PAGE(S) 22685.................................... 54 22687.................................... 54 24995.................................... 51 24997.................................... 51 25032.................................... 51 25036.................................... 51 25042.................................... 51 25048.................................... 51 25066.................................... 51 25074.................................... 51 25076.................................... 51 25092.................................... 51 25094.................................... 51 25096.................................... 51 26022.........................45, 46, 47 27075.................................... 40 27076.................................... 40 27405.................................... 24 29001.................................... 47 29006.............................. 14, 47 29021.........................35, 45, 47 29028.........................45, 46, 47 29029.........................45, 46, 47 29030.........................45, 46, 47 29033.........................45, 46, 47 29036.........................45, 46, 47 29040.................................... 46 29041.............................. 45, 47 29046.........................45, 46, 47 29047.........................45, 46, 47 29049.........................45, 46, 47 29050.........................45, 46, 47 29052.................................... 47 29053.........................45, 46, 47 29054.................................... 47 29055.........................45, 46, 47 29056.........................45, 46, 47 29057.................................... 47 29058.................................... 47 29062.................................... 47 29063.................................... 47 29086.............................. 14, 47 32134.................................... 56 32135.................................... 56 32709.................................... 55 32721.................................... 55 33145.................................... 56 34449.............................. 55, 57 34700.............................. 54, 56 34800.............................. 24, 45 34801.................................... 45 34802.................................... 46 34806.............................. 14, 45 34808.............................. 14, 46 34811.............................. 35, 46 34819.........................45, 46, 47 34823.............................. 45, 46 34825.............................. 45, 46 34830.................................... 45 34831.................................... 45 34832.................................... 45 34835.........................14, 45, 46 34940.................................... 51 34941.................................... 51 37065.................................... 24 39995.................................... 16 39996.................................... 16 39997.................................... 16 www.sharpe1.com • 1-800-742-7731 63 INDEX PART NO. PAGE(S) 103996............................ 49, 50 112077............................ 49, 50 112078............................ 49, 50 118741.......................45, 46, 47 118749.......................45, 46, 47 118956.................................. 46 119030............................ 49, 50 119077.................................. 43 119288.................................. 45 156823............................ 49, 50 157350.................................. 50 234791.................................... 9 244953............................ 49, 50 253417.................................. 25 253418.................................. 25 253427.................................... 5 253428.................................... 5 253429.................................... 5 253432.............................. 2, 33 253433.............................. 2, 33 253434.........................2, 17, 33 253435.............................. 2, 33 253436.................................. 33 253437...................9, 24, 33, 38 253438....... 2, 5, 8, 9, 17, 24, 33 253439.........................9, 24, 33 253441.............................. 6, 33 253442.............................. 6, 33 253443.............................. 6, 33 253444.............................. 6, 33 253748.......................38, 40, 42 253769...........................2, 6, 11 253771....2, 3, 4, 5, 6, 7, 8, 9, 11 253772............... 2, 4, 5, 6, 9, 11 253774.................................... 9 253777.................................. 10 253778.................................. 10 253783.......................38, 40, 42 253784.......................38, 40, 42 253785............................ 38, 40 253789.................................... 9 253790.................................... 9 253792.................................. 11 253793.........................2, 11, 34 253794................................ 2, 4 253795.....................2, 4, 11, 34 253796................................ 2, 4 253803.................................... 5 253804.................................... 5 253805.................................... 5 253816.................................. 11 253817.........................6, 11, 34 253818.................................... 6 253819.........................6, 11, 34 253820.................................... 6 253824............................ 11, 34 253825............................ 11, 34 253827.................................. 10 253933.......................38, 40, 42 253934.......................38, 40, 42 253969.................................. 26 253970.......................38, 40, 42 253971.................................. 38 253972.......................38, 40, 42 253973.................................. 38 253974.......................38, 40, 42 253975.............................. 9, 26 253976.......................38, 40, 42 PART NO. PAGE(S) 253977............................ 24, 38 253978.......................2, 5, 8, 24 253979.......................38, 40, 42 287961............................ 10, 33 288281.................................... 8 288286.................................. 10 288287.................................. 10 288288.................................. 10 288290.................................. 10 288291............................ 10, 33 288292............................ 10, 33 288294............................ 10, 33 288295.................................. 11 288297.............................. 8, 11 288299.................................. 11 288302.................................. 10 288303.................................. 10 288304.................................. 10 288306.................................. 10 288307.................................. 10 288308.................................. 10 288310.................................. 10 288451.................................. 11 288452.................................. 11 288454.................................. 10 288455.................................. 10 288457.................................. 10 288641............................ 10, 11 288642.................................. 10 288643.................................. 10 288654.............................. 6, 33 288661.................................. 24 288878.................................. 12 288879.................................. 12 288880.................................. 12 288881.................................. 12 288882.................................. 12 288883.................................. 13 288884.................................. 13 288885.................................. 13 288886.................................. 13 288887.................................. 13 288890.................................. 44 288891.................................. 44 288895.................................. 44 288896.................................. 44 289142.................................. 42 289200............................ 12, 17 289213.................................. 38 289214.................................... 4 289215.................................... 4 289216.................................... 4 289221.................................. 12 289222.................................. 12 289231.................................. 10 289233............................ 11, 43 289286.................................. 44 289287.................................. 44 289288.......................12, 13, 44 289289............................ 12, 44 289290............................ 12, 44 289291............................ 13, 44 289292............................ 13, 44 289293............................ 13, 44 289294............................ 13, 44 289295............................ 13, 44 289296............................ 12, 44 289297............................ 12, 44 64 www.sharpe1.com • 1-800-742-7731 PART NO. PAGE(S) 289298............................ 12, 44 289299............................ 12, 44 289300............................ 12, 44 289314.................................. 44 289315.................................. 44 289320............................ 25, 44 289321.................12, 13, 25, 44 289380.................................... 3 289381.................................... 3 289382.................................... 7 289383.................................... 7 289388...........................3, 7, 17 289389.................................... 3 289390................................ 3, 7 289391.................................... 7 289399.................................. 42 289407.................................. 42 289517.................12, 13, 25, 44 289520.................12, 13, 26, 44 289534.................................. 18 289561.................................... 3 289562.................................... 7 289571.................................... 3 289572.................................... 7 289816.................................. 25 289817.................................. 25 289818.................................. 25 289839.............................. 9, 24 289841.................................... 9 289956...........................3, 7, 23 289957.................................. 23 289958.................................. 23 309989.................................. 14 309990.................................. 14 309991.................................. 14 310587.................................. 15 310588.................................. 24 310595.................................. 18 310596.................................. 17 310601............................ 20, 21 310603............................ 20, 21 310605.................................. 22 310609.................................. 19 310611.................................. 19 310884.................................. 16 311684......... 2, 3, 4, 5, 6, 7, 8, 9 311685.................................. 10 312372............................ 12, 13 312412.................................. 11 D-5-55..................14, 26, 35, 47 D-500..........................14, 26, 47 D-500-72......................... 14, 26 F2........................................... 30 F88..............................20, 32, 55 F88M...................................... 20 FX1000...........12, 13, 26, 35, 44 FX2000.......................13, 35, 44 FX3000.................12, 17, 35, 44 H.O.V...................................... 27 M6C125................................. 24 M6C190................................. 24 MGF HVLP...................14, 24, 35 MPF HVLP.............................. 14 U04410.....................2, 4, 6, 8, 9 U07505.................................. 45 U07510............................ 14, 47 U07530............................ 14, 47 U10004............................ 49, 50 PART NO. PAGE(S) U23075............................ 17, 52 U23080.................................. 19 U23085.................................. 19 U32701.................................. 55 U32702.................................. 55 U32708.................................. 55 U32718.................................. 55 U32719.......................20, 21, 55 U42002.................................. 28 UO4410.................................. 27 UO5510.................................. 27 UO6710............................ 20, 57 UO6720.................................. 21 UO7505............................ 14, 24 UO7510............................ 14, 26 UO7530.................................. 26 Standard Sharpe Warranty Sharpe warrants all equipment manufactured by Sharpe and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Sharpe Channel Member to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Sharpe, Sharpe will, for a period of time specified in the following Product Warranty Matrix, issue credit, repair or replace any part of the equipment determined by Sharpe to be defective. This warranty applies only when the equipment is operated and/or installed and maintained in accordance with Sharpe’s written recommendations. This warranty does not cover, and Sharpe shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering or substitution of non-Sharpe component parts. Nor shall Sharpe be liable for malfunction, damage or wear caused by the incompatibility of Sharpe equipment with structures, accessories, equipment or materials not supplied by Sharpe, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Sharpe. This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to Sharpe for verification of the claimed defect. If the claimed defect is verified, Sharpe will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation. THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. Sharpe’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within one year beyond warranty expiration. Sharpe makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection with accessories, equipment, materials or components sold but not manufactured by Sharpe. These items sold, but not manufactured by Sharpe (such as heat lamps, refrigerated dryers, hoses, etc.), are subject to the warranty, if any, of their manufacturer. Sharpe will provide purchaser with reasonable assistance in making any claim for breach of these warranties. In no event will Sharpe be liable for indirect, incidental, special or consequential damages resulting from Sharpe supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Sharpe, or otherwise. For Sharpe Canadian Customers The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées. PRODUCT WARRANTY MATRIX Warranty Period Product (from date of sale from Sharpe Channel Member to original purchaser RAZOR® 3 years Cobalt 2 years Finex by Sharpe 1 year General Sharpe Product (guns, pots, cups, filters) 1 year Dryaire Membrane and Desiccant Systems 1 year Dryaire Refrigerated Air Dryers varies by component ™ Sharpe Manufacturing Company Minneapolis, MN 55413 800-SHARPE1 (800-742-7731) www.sharpe1.com ©2007-2009 Graco Inc. 337740E
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23 Modify Date : 2009:03:12 09:57:10-05:00 Create Date : 2009:03:12 09:57:10-05:00 Metadata Date : 2009:03:12 09:57:10-05:00 Format : application/pdf Document ID : uuid:5b4f3642-7927-4ea4-a4a5-a60b88f45658 Instance ID : uuid:89f3da59-f191-4b1f-a823-ff2361cb0a22 Page Count : 68EXIF Metadata provided by EXIF.tools