Intralink LC2000 Logic Controller Siemens

User Manual: LC2000

Open the PDF directly: View PDF .
Page Count: 2

Water Technologies

Intralink™ LC2000

Logic Controller

The Siemens Control Systems IntraLink™ LC2000

combines on board I/O with a state of the art open

Controller. The LC2000 was developed specifically for

smaller, remote applications in the water and

wastewater industry.

This innovative Controller combines robust I/O, open

architecture and powerful communications

capabilities. This combination produces an economic,

feature rich solution that is ideal for use in remote

control applications. Siemens Water Technologies has

embedded it’s eighty plus years of water and

wastewater knowledge into special purpose function

blocks so the customer will get a consistently

programmed system built on proven optimized

algorithms.

The IntraLink™ LC2000 is the perfect building block for

creating an effective control and telemetry system. The

hardware includes high performance CPU, large

memory, powerful programming tools, 26 on-board

discrete and analog I/O and built-in Ethernet. The

optional, user-friendly operator interface uses both text

and graphics to display the information an operator

needs to effectively run a system. An operator can

easily view operating parameters, change set points,

view and acknowledge alarms, review alarm history,

and view historical trends through a high contrast,

backlit display with an ergonomic 20 key keypad.

The Controller can be programmed locally or

remotely via multiple access options. These options

include telephone dial-up connection using a

standard modem, or an Ethernet network

connection.

The LC2000 can communicate to older

Consolidated Electric (D620), Autocon (Microcat)

and Dynamic Systems (PLTU) controllers, providing

a seamless migration path for customers with

these systems.

The IntraLink™ LC2000 has the flexibility for now

and the future. Cost effective on-board I/O

(expandable up to 256 points), extensive

communications capabilities and powerful control

ability make the LC2000 ideally suited for remote

(RTU) applications.

This innovative Controller combines an industry

standard control programming language

(IEC61131-3) with Modbus and DF1

communications to deliver a truly open

architecture.

The primary focus of the Controller is to be open,

robust, flexible and useable. This product has been

developed for the water and wastewater industry,

to provide a quality driven solution now and in the

future.

Intralink™ LC2000

INTRALINK LC2000 FEATURES

• Telephone, wireless, Ethernet and Internet

connectivity.

• Windows based configuration tools.

• MTU to RTU uploads and downloads.

• 26 I/O points on-board (12 DI, 8 DO, 6 AI)

• Scalable solution (up to 256 local I/O)

• Shared resource database.

• Advanced data logging capabilities resident in the

Controller

• Alarm logging resident in the Controller.

• Supports remote access via dial-up or network.

• Advanced communication capabilities.

• Multiple communication ports.

• High speed Ethernet connection.

• Flexible radio communications.

• Supports open and native protocols.

• Industry standard IEC 61131-3 programming

software.

• Embedded specialized water and wastewater

function blocks.

The information provided in this literature contains merely general descriptions or characteristics

of performance which in actual case of use do not always apply as described or which may

change as a result of further development of the products. An obligation to provide the respective

characteristics shall only exist if expressly agreed in the terms of the contract.

Intralink is a trademark of Siemens its subsidiaries or affiliates.

Siemens

Water Technologies

1239 Willow Lake Blvd.

Vadnais Heights, MN 55110

651.766.2700 phone

651.766.2701 fax

www.usfilter.com

Printed in U.S.A.

CS-LC2-DS-0806

©2006 Siemens Water Technologies Corp.

Subject to change without prior notice.

• Fast controller speed.

• Large amount of controller memory.

• Small footprint runs on 10-30 Vdc.

• Certified hardware.

• Ergonomically designed keypad.

• Back lighted, high contrast display.

• Pre-configured operator interface display formats.

• Three levels of operator interface security.

• Graphical trend data.

• View and acknowledge alarms locally.

• Resident 1000 entry event log.

• Detailed system diagnostics.

• Ability to force outputs and simulate inputs to

locally test operations.

• Intrusion detection to alert unwanted access.

CONTROLLER

Processor Industrial PowerPC (32 bit data bus)

Operating system Embedded LINUX

Dynamic memory (RAM) 16 Megabytes – 32 bit

Program memory (Flash) 16 Megabytes

Datalogging memory (RAM) 512K

Configuration software IsaGRAF IEC 61131-3

Maximum local I/O 26 points (12DI, 8DO, 6AI)

Maximum distributed I/O 256 points

Ethernet port 10/100BaseTx

Serial ports Two RS232 and one RS485

Input power 10 – 30 VDC

Input current 100 mA @24 VDC

Temperature -40 to 70ºC

Humidity 5% to 95% RH (non-condensing)

Hazardous locations UL 1604, CSA C22.2/213, Cenelec

EN50021 Zone 2

(Class 1, Div 2, Groups A,B,C,D)

Mounting DIN rail (EN50022) or flat panel

OPERATOR INTERFACE

Display 128 x 64 pixel (backlit)

Distance from Controller 10 feet

Power Supply Supplied by Controller

Temperature 0 to 50ºC

Humidity 15% to 85% RH (non-condensing)

Physical Dimensions 5.7” x 8.0”

Environmental rating IP65/Nema 4