DSC RX100M4 Sony RX100 IV Manual For Sonys Premium Compact Camera

User Manual: Sony-DSC-RX100-IV-Manual-for-Sonys-Premium-Compact-Camera

Open the PDF directly: View PDF .
Page Count: 44

Download
Open PDF In Browser	View PDF

4-574-160-11(1)

Digital Still Camera
Instruction Manual

“Help Guide” (Web manual)
Refer to “Help Guide” for in-depth
instructions on the many functions of
the camera.
http://rd1.sony.net/help/dsc/1530/h_zz/

DSC-RX100M4

English
Learning more about the camera (“Help Guide”)
“Help Guide” is an on-line manual. You can read the “Help
Guide” on your computer or smartphone.
Refer to it for in-depth instructions on the many functions of
the camera.
URL:
http://rd1.sony.net/help/dsc/1530/h_zz/

Viewing the Guide
This camera is equipped with a built-in instruction guide.
Fn (Function)
MENU
C/

(Delete)

In-Camera Guide
The camera displays explanations for MENU/Fn (Function) items and the
setting values.
1 Press the MENU button or the Fn (Function) button.
2 Select the desired item, then press the C/ (Delete) button.

Owner’s Record
The model and serial numbers are located on the bottom. Record the serial number in the
space provided below. Refer to these numbers whenever you call your Sony dealer
regarding this product.
Model No. WW481040 (DSC-RX100M4)
Serial No. _____________________________
Model No. AC-UB10C/AC-UB10D
Serial No. _____________________________

WARNING
To reduce fire or shock hazard, do not expose the unit to rain or
moisture.

IMPORTANT SAFETY INSTRUCTIONS
-SAVE THESE INSTRUCTIONS
DANGER
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS
If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the
proper configuration for the power outlet.

CAUTION
[ Battery pack
If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical
burns. Observe the following cautions.
• Do not disassemble.
• Do not crush and do not expose the battery pack to any shock or force such as
hammering, dropping or stepping on it.
• Do not short circuit and do not allow metal objects to come into contact with the battery
terminals.
• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a
car parked in the sun.
• Do not incinerate or dispose of in fire.
• Do not handle damaged or leaking lithium ion batteries.

• Be sure to charge the battery pack using a genuine Sony battery charger or a device that
can charge the battery pack.
• Keep the battery pack out of the reach of small children.
• Keep the battery pack dry.
• Replace only with the same or equivalent type recommended by Sony.
• Dispose of used battery packs promptly as described in the instructions.

[ AC Adaptor
Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC
Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while
using the apparatus.

For Customers in the U.S.A. and Canada
[ RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are recyclable.
You can help preserve our environment by returning your used
rechargeable batteries to the collection and recycling location nearest
you.
For more information regarding recycling of rechargeable batteries,
call toll free
1-800-822-8837, or visit http://www.call2recycle.org/
Caution: Do not handle damaged or leaking Lithium-Ion batteries.

[ Battery pack
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
CAN ICES-3 B/NMB-3 B
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines
and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low
levels of RF energy that are deemed to comply without testing of specific absorption ratio
(SAR).

For Customers in the U.S.A.
If you have any questions about this product, you may call:
Sony Customer Information Center
1-800-222-SONY (7669)
The number below is for the FCC related matters only.

[ Regulatory Information
Declaration of Conformity
Trade Name: SONY
Model No.: WW481040
Responsible Party: Sony Electronics Inc.
Address:
16535 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
This equipment must not be co-located or operated in conjunction with any other antenna
or transmitter.

[ CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual
could void your authority to operate this equipment.

[ Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The supplied interface cable must be used with the equipment in order to comply with the
limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

For Customers in Canada
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.

For Customers in Europe
[ Notice for the customers in the countries applying EU Directives
Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan
For EU product compliance: Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327
Stuttgart, Germany

Hereby, Sony Corporation, declares that this equipment is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. For details, please
access the following URL:
http://www.compliance.sony.de/

[ Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail),
restart the application or disconnect and connect the communication cable (USB, etc.)
again.
This product has been tested and found compliant with the limits set out in the EMC
regulation for using connection cables shorter than 3 meters (9.8 feet).
The electromagnetic fields at the specific frequencies may influence the picture and sound
of this unit.

[ Disposal of waste batteries and electrical and electronic
equipment (applicable in the European Union and other
European countries with separate collection systems)
This symbol on the product, the battery or on the packaging indicates
that the product and the battery shall not be treated as household waste.
On certain batteries this symbol might be used in combination with a
chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb)
are added if the battery contains more than 0.0005% mercury or
0.004% lead. By ensuring these products and batteries are disposed of
correctly, you will help prevent potentially negative consequences for
the environment and human health which could otherwise be caused by inappropriate
waste handling. The recycling of the materials will help to conserve natural resources.
In case of products that for safety, performance or data integrity reasons require a
permanent connection with an incorporated battery, this battery should be replaced by
qualified service staff only. To ensure that the battery and the electrical and electronic
equipment will be treated properly, hand over these products at end-of-life to the
applicable collection point for the recycling of electrical and electronic equipment. For all
other batteries, please view the section on how to remove the battery from the product
safely. Hand the battery over to the applicable collection point for the recycling of waste
batteries. For more detailed information about recycling of this product or battery, please
contact your local Civic Office, your household waste disposal service or the shop where
you purchased the product or battery.

For Customers in Singapore

For Customers in U.A.E.

Checking the supplied items
The number in parentheses indicates the number of pieces.
• Camera (1)
• Rechargeable Battery Pack NP-BX1 (1)
• Micro USB Cable (1)
• AC Adaptor (1)
• Power Cord (mains lead) (not supplied in the USA and Canada) (1)
• Wrist Strap (1)
• Strap adapter (2)
(Strap adapters are used to attach the shoulder strap (sold separately), as
illustrated.)

• Instruction Manual (this manual) (1)
• Wi-Fi Connection/One-touch (NFC) Guide (1)
This guide explains the functions that require a Wi-Fi connection.
For further details on Wi-Fi functions/One-touch (NFC) functions, refer to
the “Wi-Fi Connection/One-touch (NFC) Guide” (supplied) or the “Help
Guide” (page 2).

About language setting
Change the screen language before using the camera if necessary (page 18).

Identifying parts
A ON/OFF (Power) button
B Power/Charge lamp
C Shutter button
D Mode dial
(Auto Mode)/
(Program Auto)/
(Aperture Priority)/
(Shutter Priority)/
(Manual Exposure)/
(Memory recall)/
(Movie)/
(High Frame
Rate)/
(Sweep Panorama)/
(Scene Selection)
E For shooting: W/T (zoom) lever
For viewing:
(Index) lever/
Playback zoom lever
F Self-timer lamp/AF illuminator
G Flash
• Do not cover the flash with your
finger.
• When using the flash, slide the
(Flash pop-up) switch. If not
using the flash, press it down
manually.

H Diopter-adjustment lever

I Viewfinder

R Monitor
• You can adjust the monitor to an
easily viewable angle and shoot
from any position.

• When using the viewfinder, slide
down the viewfinder pop-up
switch (1), then pull the
eyepiece out from the viewfinder
until it clicks (2).
• When you look into the
viewfinder, the viewfinder mode
is activated, and when you take
your face away from the
viewfinder, the viewing mode
returns to the monitor mode.

J Microphone
K Viewfinder pop-up switch
L Hook for strap
M
(N Mark)
• Touch the mark when you
connect the camera to a
smartphone equipped with the
NFC function.
• NFC (Near Field
Communication) is an
international standard of the
short-range wireless
communication technology.

S For shooting: Fn (Function)
button
For viewing:
(Send to
Smartphone) button
T MOVIE (Movie) button
U Multi/Micro USB Terminal
• Supports Micro USB compatible
device.

V
W
X
Y
wh
wj
wk
wl
e;

• Use a tripod with a screw less
than 5.5 mm (7/32 inches) long.
Otherwise, you cannot firmly
secure the camera, and damage to
the camera may occur.

N Control ring
O Lens
P Eye sensor
Q (Flash pop-up) switch
ea
es
ed
ef
GB

HDMI micro jack
MENU button
Wi-Fi antenna (built-in)
Control wheel
(Playback) button
C/ (Custom/Delete) button
Battery insertion slot
Battery lock lever
Tripod socket hole

Access lamp
Memory card slot
Battery/Memory card cover
Speaker

Inserting the battery pack

Battery lock lever

1 Open the cover.
the battery pack.
2 Insert
• While pressing the battery lock lever, insert the battery pack as
illustrated. Make sure that the battery lock lever locks after insertion.
• Closing the cover with the battery inserted incorrectly may damage the
camera.

Charging the battery pack
For customers in the USA
and Canada

Power cord
(Mains lead)
For customers in countries/regions
other than the USA and Canada

Power/Charge lamp
Lit: Charging
Off: Charging finished
Flashing:
Charging error or
charging paused
temporarily because the
camera is not within the
proper temperature range

the camera to the AC Adaptor (supplied),
1 Connect
using the micro USB cable (supplied).
the AC Adaptor to the wall outlet (wall socket).
2 Connect
The power/charge lamp lights orange, and charging starts.
• Turn off the camera while charging the battery.
• You can charge the battery pack even when it is partially charged.
• When the power/charge lamp flashes and charging is not finished,
remove and re-insert the battery pack.

Notes
• If the power/charge lamp on the camera flashes when the AC Adaptor is connected
to the wall outlet (wall socket), this indicates that charging is temporarily stopped
because the temperature is outside the recommended range. When the temperature
gets back within the appropriate range, the charging resumes. We recommend
charging the battery pack in an ambient temperature of between 10°C to 30°C
(50ºF to 86ºF).
• The battery pack may not be effectively charged if the terminal section of the
battery is dirty. In this case, wipe any dust off lightly using a soft cloth or a cotton
swab to clean the terminal section of the battery.
• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If
malfunctions occur while using the AC Adaptor, disconnect the plug from the wall
outlet (wall socket) immediately to disconnect from the power source.
• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall
socket).
• Be sure to use only genuine Sony brand battery packs, micro USB cable (supplied)
and AC Adaptor (supplied).
• The AC Adaptor AC-UD11 (sold separately) may not be available in some
countries/regions.

x Charging time (Full charge)
The charging time is approximately 230 min. using the AC Adaptor
(supplied). The power/charge lamp lights up and then turns off immediately
when the battery pack is fully charged.
Notes
• The above charging time applies when charging a fully depleted battery pack at a
temperature of 25°C (77°F). Charging may take longer depending on conditions of
use and circumstances.

x Charging by connecting to a computer
The battery pack can be charged by connecting the camera to a computer using
a micro USB cable. Connect the camera to the computer with the camera
turned off.

To a USB jack
Notes
• If the camera is connected to a laptop computer that is not connected to a power
source, the laptop battery level decreases. Do not charge for an extended period of
time.
• Do not turn on/off or restart the computer, or wake the computer to resume from
sleep mode when a USB connection has been established between the computer
and the camera. That may cause the camera to malfunction. Before turning on/off,
or restarting the computer or waking the computer from sleep mode, disconnect
the camera and the computer.
• No guarantees are made for charging using a custom-built computer or a modified
computer.

x Battery life and number of images that can be
recorded and played back
Battery life

Number of images

Shooting (still
images)

Monitor

—

Approx. 280 images

Viewfinder

—

Approx. 230 images

Typical movie
shooting

Monitor

Approx. 45 min.

—

Viewfinder

Approx. 45 min.

—

Monitor

Approx. 80 min.

—

Continuous
movie shooting

Viewfinder

Viewing (still images)

Approx. 85 min.

—

Approx. 200 min.

Approx. 4000 images

Notes
• The above number of images applies when the battery pack is fully charged. The
number of images may decrease depending on the conditions of use.
• The number of images that can be recorded is for shooting under the following
conditions:
– Using Sony Memory Stick PRO Duo™ (Mark2) media (sold separately)
– The battery pack is used at an ambient temperature of 25°C (77°F).
– [Display Quality] is set to [Standard]
• The number for “Shooting (still images)” is based on the CIPA standard, and is for
shooting under the following conditions:
(CIPA: Camera & Imaging Products Association)
– DISP is set to [Display All Info.].
– Shooting once every 30 seconds.
– The zoom is switched alternately between the W and T ends.
– The flash strobes once every two times.
– The power turns on and off once every ten times.
• The numbers of minutes for movie shooting are based on the CIPA standard, and
are for shooting under the following conditions:
–[
Record Setting]: 60i 17M(FH)/50i 17M(FH)
– Typical movie shooting: Battery life based on repeatedly starting/stopping
shooting, zooming, turning on/off, etc.
– Continuous movie shooting: Battery life based on non-stop shooting until the
limit (29 minutes) has been reached, and then continued by pressing the MOVIE
button again. Other functions, such as zooming, are not operated.

x Supplying power
You can use the AC Adaptor (supplied) to supply power during shooting or
playing back images, reducing battery pack consumption.
Notes
• The camera will not activate if there is no remaining battery. Insert a sufficiently
charged battery pack into the camera.
• If you use the camera while power is being supplied from a wall outlet (wall
socket), make sure that the icon (
) displays on the monitor.
• Do not remove the battery pack while power is being supplied from a wall outlet
(wall socket). If you remove the battery pack, the camera will turn off.
• Do not remove the battery pack while the access lamp (page 10) is lit. The data on
the memory card may be damaged.
• As long as the power is on, the battery pack will not be charged even if the camera
is connected to the AC Adaptor.
• Under certain conditions, power may be supplied from the battery supplementarily
even if you are using the AC Adaptor.
• While power is being supplied via USB connection, the temperature inside the
camera will rise and the continuous recording time may be shortened.

Inserting a memory card (sold separately)

Ensure the notched corner
faces correctly.

1 Open the cover.
the memory card.
2 Insert
• With the notched corner facing as illustrated, insert the memory card
until it clicks into place.

3 Close the cover.
GB

x Memory cards that can be used
Memory card
Memory Stick PRO Duo

For still
images

For movies
MP4

AVCHD

(Mark2 only) (Mark2 only)

Memory Stick PRO-HG Duo™
Memory Stick Micro™ (M2)
SD memory card

microSD memory card

(Mark2 only) (Mark2 only)
*1

microSDHC memory card
microSDXC memory card

—
—

SDHC memory card
SDXC memory card

XAVC S

—
—
*2

—
*2

SD Speed Class 4:
or faster, or UHS Speed Class 1:
or faster
Memory cards that fulfill all of the following conditions:
– Capacity of 64 GB or more
– SD Speed Class 10:
, or UHS Speed Class 1:
or faster
When recording in 100 Mbps or more, UHS Speed Class 3:
is required.
• For details on the number of recordable still images and recordable duration of
movies, refer to pages 32 to 33. Check the tables to select a memory card with the
desired capacity.
*2

Notes
• Not all memory cards are guaranteed to operate correctly. For memory cards
produced by manufacturers other than Sony, consult the manufacturers of the
products.
• When using Memory Stick Micro media or microSD memory cards with this
camera, make sure to use with the appropriate adaptor.

x To remove the memory card/battery pack
Memory card: Push the memory card in once to eject the memory card.
Battery pack: Slide the battery lock lever. Be sure not to drop the battery pack.
Notes
• Never remove the memory card/battery pack when the access lamp (page 10) is lit.
This may cause damage to data in the memory card.

Setting the language and the clock
Power/Charge lamp (green)
ON/OFF (Power)

Control wheel

Select items: v/V/b/B
Set the numeric value of date and
time: v/V/ /
Set: z

the ON/OFF (Power) button.
1 Press
Language setting screen is displayed when you turn on the camera for the
first time.
• It may take time for the power to turn on and allow operation.

a desired language, then press z on the control
2 Select
wheel.
Date & Time setting screen is displayed.

that [Enter] is selected on the screen, then press
3 Check
z.
a desired geographic location by following the
4 Select
on-screen instructions, then press z.
[Daylight Savings], [Date/Time] and [Date Format],
5 Set
then press z.
• When setting [Date/Time], midnight is 12:00 AM, and noon is
12:00 PM.
GB

6 Check that [Enter] is selected, then press z.

Shooting still images/movies
Shutter button
W/T (zoom)
lever

Mode dial

W: zoom out
T: zoom in

: Auto Mode
: Movie
MOVIE

Shooting still images

the shutter button halfway down to focus.
1 Press
When the image is in focus, a beep sounds and the z indicator lights.

2 Press the shutter button fully down to shoot an image.
Shooting movies

the MOVIE (Movie) button to start recording.
1 Press
• Use the W/T (zoom) lever to change the zoom scale.

2 Press the MOVIE button again to stop recording.
Notes
• When using the zoom function while shooting a movie, the sound of the camera
operating will be recorded. Sound from the camera tends to be recorded
particularly when [Zoom Speed] is set to [Fast] and when [Zoom Func. on Ring] is
set to [Quick]. The sound of the MOVIE button operating may also be recorded
when movie recording is finished.
• Continuous movie shooting is possible for a maximum of approximately
29 minutes at one time with the camera’s default settings and when the ambient
temperature is approximately 25°C (77°F). When movie recording is finished, you
can restart recording by pressing the MOVIE button again. Recording may stop to
protect the camera depending on the ambient temperature.
GB

Viewing images
W: zoom out
T: zoom in
Control wheel

(Playback)
C/

1 Press the

(Delete)

Select images: B (next)/b (previous) or
turn the control wheel
Set: z

(Playback) button.

x Selecting next/previous image
Select an image by pressing B (next)/b (previous) on the control wheel or by
turning the control wheel. Press z in the center of the control wheel to view
movies.

x Deleting an image
1 Press the C/ (Delete) button.
2 Select [Delete] with v on the control wheel, then press z.

x Returning to shooting images
Press the shutter button halfway down.

Introduction of other functions

Control ring

Fn (Function)

Control wheel

x Control wheel
DISP (Display Contents): Allows you to change the screen display.
(Drive Mode): Allows you to switch between shooting methods, such
as single shooting, continuous shooting or bracket shooting.
/
(Exposure Comp./Photo Creativity): Allows you to adjust image
brightness./Allows you to operate the camera intuitively and shoot creative
images easily.
(Flash Mode): Allows you to select a flash mode for still images.

x Fn (Function) button
Allows you to register 12 functions and recall those functions when shooting.
1 Press the Fn (Function) button.
2 Select the desired function by pressing v/V/b/B on the control wheel.
3 Select the setting value by turning the control wheel or the control ring.

x Control ring
Your favorite functions can be assigned to the control ring. When shooting,
established settings can be changed just by turning the control ring.
GB

x Menu Items
(Camera Settings)
Image Size

Selects the size of still images.

Aspect Ratio

Selects the aspect ratio for still images.

Quality

Sets the image quality for still images.

Img. Size(Dual Rec)

Sets the size of still images shot when recording a
movie.

Quality(Dual Rec)

Sets the image quality for still images shot when
recording a movie.

File Format

Selects the movie file format.

Record Setting

Selects the size of the recorded movie frame.

Dual Video REC
HFR Settings

Selects the size of panoramic images.

Panorama: Direction

Sets the shooting direction for panoramic images.

Drive Mode

Sets the drive mode, such as for continuous shooting.

Bracket Settings

Sets self-timer shooting in bracket mode, shooting
order for exposure bracketing, and white balance
bracketing.

Flash Mode

Sets the flash settings.

Flash Comp.

Adjusts the intensity of flash output.

Red Eye Reduction

Reduces the red-eye phenomenon when using flash.

Focus Mode

Selects the focus method.

AF Illuminator

Sets the High Frame Rate shooting settings.

Panorama: Size

Focus Area

Sets whether to simultaneously record an XAVC S
movie and MP4 movie or an AVCHD movie and
MP4 movie.

Selects the area of focus.
Sets the AF illuminator, which provides light for a
dark scene to aid focusing.

Exposure Comp.

Compensates for the brightness of the entire image.

ISO

Adjusts the luminous sensitivity.

ISO AUTO Min. SS

Sets the slowest shutter speed at which ISO
sensitivity will start to change in [ISO AUTO] mode.

ND Filter

Sets the function that reduces the amount of light.
You can set to a slower shutter speed, reduce the
aperture value, etc.

Metering Mode

Selects the method for measuring brightness.

White Balance

Adjusts color tones of an image.

DRO/Auto HDR

Compensates automatically for brightness and
contrast.

Creative Style

Selects the desired image processing. You can also
adjust contrast, saturation and sharpness.

Picture Effect

Selects the desired effect filter to achieve a more
impressive and artistic expression.

Picture Profile

Changes settings such as color and tone when
recording movies.

Focus Magnifier

Enlarges the image before shooting so that you can
check the focus.

Long Exposure
NR
High ISO NR

Sets noise reduction processing for shots with a
shutter speed of 1/3 second or longer.
Sets noise reduction processing for high-sensitivity
shooting.

Center Lock-on AF

Sets the function to track a subject and continue
focusing when pressing the center button in the
shooting screen.

Smile/Face Detect.

Selects to detect faces and adjust various settings
automatically. Sets to automatically release the
shutter when a smile is detected.

Auto Dual Rec

Sets the shutter to release automatically when an
impressive composition including a person is detected
during movie shooting.

Soft Skin Effect

Sets the Soft Skin Effect and the effect level.

Auto Obj.
Framing

Analyzes the scene when capturing faces, close-ups,
or subjects tracked by Lock-on AF function, and
automatically trims and saves another copy of the
image with a more impressive composition.

Auto Mode

You can shoot selecting either Intelligent Auto or
Superior Auto.

Scene Selection

Selects pre-set settings to match various scene
conditions.

High Frame Rate

Selects the exposure mode during High Frame Rate
shooting to suit your subject or effect.

Movie

Selects the exposure mode to suit your subject or
effect.

SteadyShot

Sets SteadyShot for shooting still images. Reduces
blur from camera shake when shooting while holding
the camera.

SteadyShot

Sets SteadyShot for shooting movies.

Color Space

Changes the range of reproducible colors.

Auto Slow Shut.

Sets the function that automatically adjusts the shutter
speed following the brightness of the environment in
movie mode.

Audio Recording

Sets whether to record audio when shooting a movie.

Micref Level

Selects the microphone level during movie recording.

Wind Noise Reduct.

Reduces wind noise during movie recording.

Memory recall

Selects a setting registered in advance when the mode
dial is set to MR (Memory recall). Optical zoom scale,
etc. can be registered.

Memory

Registers the desired modes or camera settings.

(Custom Settings)
Zebra
MF Assist

Displays stripes to adjust brightness.
Displays an enlarged image when focusing manually.

Focus Magnif. Time

Sets the length of time the image will be shown in an
enlarged form.

Grid Line

Sets a grid line display to enable alignment to a
structural outline.

Marker Display

Sets whether to display the marker on the monitor
when recording movies.

Marker Settings

Sets the marker displayed on the monitor when
recording movies.

Auto Review

Sets auto review to display the captured image after
shooting.

DISP Button

Sets the type of information to be displayed on the
monitor or in the viewfinder by pressing DISP on the
control wheel.

Peaking Level

Enhances the outline of in-focus ranges with a
specific color when focusing manually.

Peaking Color

Sets the color used for the peaking function.

Exposure Set. Guide

Sets the guide displayed when exposure settings are
changed in the shooting screen.

Live View Display

Sets whether or not to reflect settings such as
exposure compensation in screen display.

Pre-AF

Sets whether or not to perform auto focus before the
shutter button is half pressed.

Zoom Speed

Sets the zooming speed when you operate the zoom
lever.

Zoom Setting

Sets whether to use the Clear Image Zoom and Digital
Zoom when zooming.

FINDER/MONITOR

Sets the method for switching between the viewfinder
and monitor.

Release w/o Card

Sets whether to release the shutter when a memory
card is not inserted.

AEL w/ shutter

Sets whether to perform AEL when the shutter button
is half pressed. This is useful when you want to adjust
the focus and exposure separately.

Shutter Type

Sets whether a mechanical shutter or an electronic
shutter is used when shooting still images.

Self-portrait/ -timer

Sets whether to use a 3-second delay self-timer when
the screen is tilted upward about 180 degrees.

Face Registration

Registers or changes the person to be given priority in
the focus.

Write Date

Sets whether to record a shooting date on the still
image.

Function Menu Set.

Customizes the functions displayed when the Fn
(Function) button is pressed.

Custom Key Settings

Assigns a desired function to the button and the
control ring.

Zoom Func. on Ring

Sets the zooming function of the control ring. When
you select [Quick], the zoom position moves in
accordance with the degree of rotation of the control
ring. When you select [Step], you can move the zoom
position to a fixed step of the focal length.

MOVIE Button

Sets whether to always activate the MOVIE button.

Wheel Lock

Sets whether to disable the control wheel temporarily
by using the Fn button when shooting. You can
disable/enable the control wheel by pressing and
holding down the Fn button.

(Wireless)

Send to Smartphone

Transfers images to display on a smartphone.

Send to Computer

Backs up images by transferring them to a computer
connected to a network.

View on TV

You can view images on a network-enabled TV.

One-touch(NFC)

Assigns an application to One-touch (NFC). You can
call up the application when shooting by touching an
NFC-enabled smartphone to the camera.

Airplane Mode

You can set this device to not perform wireless
communications.

WPS Push

You can register the access point to the camera easily
by pushing the WPS button.

Access Point Set.

You can register your access point manually.

Edit Device Name

You can change the device name under Wi-Fi Direct,
etc.

Disp MAC Address

Displays the MAC address of the camera.

SSID/PW Reset

Resets the SSID and password of smartphone
connection.

Reset Network Set.

Resets all network settings.

(Application)
Application List

Displays the application list. You can select the
application you want to use.

Introduction

Displays instructions on using the application.

(Playback)
Delete

Deletes an image.

View Mode

Sets the way in which images are grouped for
playback.

Image Index

Displays multiple images at the same time.

Display Rotation

Sets the playback direction of the recording image.

Slide Show

Shows a slide show.

Rotate
Enlarge Image

Rotates the image.
Enlarges the playback images.

Protect

Protects the images.

Motion Interval ADJ

Adjusts the interval for showing the tracking of
subjects in [Motion Shot Video], where the tracking
of the subject’s motion will be shown when playing
back movies.

Specify Printing

Adds a print order mark to a still image.

Beauty Effect

Retouches a person’s face on a still image and saves
the retouched image as a new image.

(Setup)
Monitor Brightness

Sets the monitor brightness.

Viewfinder Bright.

Sets the brightness of the electronic viewfinder.

Finder Color Temp.

Sets the color temperature of the viewfinder.

Volume Settings

Sets the volume for movie playback.

Audio signals

Sets the operating sound of the camera.

Upload Settings

Sets the upload function of the camera when using an
Eye-Fi card.

Tile Menu

Sets whether to display the tile menu every time you
press the MENU button.

Mode Dial Guide

Turns the mode dial guide (the explanation of each
shooting mode) on or off.

Delete confirm.

Sets whether Delete or Cancel is preselected in the
Delete confirmation screen.

Display Quality

Sets the display quality.

Pwr Save Start Time

Sets the length of time until the camera turns off
automatically.

Function for VF close

Sets whether to turn the power off when the
viewfinder is closed.

NTSC/PAL Selector

By changing the TV format of the device, shooting in
a different movie format is possible.

Demo Mode

Sets demonstration playback of a movie to on or off.

TC/UB Settings

Sets the time code (TC) and user bit (UB).

HDMI Settings
4K Output Sel.
USB Connection

Sets the USB connection method.

USB LUN Setting

Enhances compatibility by limiting the functions of
the USB connection. Set to [Multi] in normal
conditions and to [Single] only when the connection
between the camera and a computer or AV
component cannot be established.

USB Power Supply

Sets whether to supply power via USB connection
when the camera is connected to a computer or USB
device using a micro USB cable.

Language

Sets the HDMI settings.
Sets how to record and output 4K movies via HDMI
when the camera is connected to an external recorder/
player that supports 4K.

Selects the language.

Date/Time Setup

Sets date and time, and daylight savings.

Area Setting

Sets the location of use.

Sets copyright information for still images.

Format

Formats the memory card.

File Number

Sets the method used to assign file numbers to still
images and movies.

Select REC Folder

Changes the selected folder for storing still images
and movies (MP4).

New Folder

Creates a new folder for storing still images and
movies (MP4).

Folder Name

Sets the folder format for still images.

Recover Image DB

Recovers the image database file and enables
recording and playback.

Display Media Info.

Displays the remaining recording time of movies and
the recordable number of still images on the memory
card.

Version

Displays the camera software version.

Setting Reset

Restores settings to their defaults.

Using software
Installing the following software to your computer will make your camera
experience more convenient.
• PlayMemories Home™: Imports images to your computer and lets you use
them in different ways (page 31).
• Image Data Converter: Displays RAW images and processes them.
• Remote Camera Control: Controls a camera connected to your computer via
a USB cable.
You can download and install this software to your computer from the
following URLs.

the Internet browser on your computer, go to one
1 Using
of the following URLs, and then follow the instructions
on the screen to download the desired software.
Windows:
http://www.sony.co.jp/imsoft/Win/
Mac:
http://www.sony.co.jp/imsoft/Mac/
• An Internet connection is required.
• For details on operation, refer to the support page or Help page of the
software.
Notes
• When using Remote Camera Control, select the MENU button t
(Setup) t
[USB Connection] t [PC Remote] and then connect the camera to your
computer.

Importing images to your computer and using
them (PlayMemories Home)
The software PlayMemories Home allows you to import still images and
movies to your computer and use them. PlayMemories Home is required for
importing XAVC S movies and AVCHD movies to your computer.
http://www.sony.net/pm/
Playing back imported
images

Importing images from
your camera
For Windows, the following functions are also
available:

Viewing images
on a calendar

Creating
movie
discs

Sharing images on
PlayMemories Online™

Uploading
images to
network services

Notes
• An Internet connection is required to use PlayMemories Online or other network
services. PlayMemories Online or other network services may not be available in
some countries or regions.
• If the software PMB (Picture Motion Browser), supplied with models released
before 2011, has already been installed on your computer, PlayMemories Home
will overwrite it during the installation. Use PlayMemories Home, the successor
software of PMB.
• New functions may be installed in PlayMemories Home. Connect the camera to
your computer even if PlayMemories Home is already installed on your computer.
• Do not disconnect the micro USB cable (supplied) from the camera while the
operating screen or the accessing screen is displayed. Doing so may damage the
data.
• To disconnect the camera from the computer, click
on the tasktray, then click
[Eject DSC-RX100M4].

Adding functions to the camera
You can add the desired functions to your camera by connecting to the
application download website
(PlayMemories Camera Apps™) via the
Internet.
http://www.sony.net/pmca/
• After installing an application, you can call up the application by touching an
NFC-enabled Android smartphone to the N mark on the camera, using the
[One-touch(NFC)] function.

Number of still images and recordable time of
movies
The number of still images and recordable time may vary depending on the
shooting conditions and the memory card.

x Still images
[

Image Size]: L: 20M

When [

Aspect Ratio] is set to [3:2]*
Capacity

Quality
Standard
Fine
Extra fine
RAW & JPEG
RAW

8 GB

64 GB

1150 images
690 images
510 images
235 images
355 images

9600 images
5500 images
4150 images
1900 images
2850 images

* When the [
Aspect Ratio] is set to other than [3:2], you can record more
pictures than shown above. (Except when [
Quality] is set to [RAW].)

x Movies
The table below shows the approximate total recording times using a memory
card formatted with this camera. The recording time for XAVC S and AVCHD
movies is the recording time when shooting with [Dual Video REC] set to
[Off].

(h (hour), m (minute))
Capacity
Record Setting
30p 100M/25p 100M
30p 60M/25p 60M
24p 100M*
24p 60M*
60p 50M/50p 50M
30p 50M/25p 50M
24p 50M*
120p 100M/100p 100M
120p 60M/100p 60M
60i 24M(FX)/50i 24M(FX)
60i 17M(FH)/50i 17M(FH)
60p 28M(PS)/50p 28M(PS)
24p 24M(FX)/25p 24M(FX)
24p 17M(FH)/25p 17M(FH)
1920×1080 60p 28M/
1920×1080 50p 28M
1920×1080 30p 16M/
1920×1080 25p 16M
1280×720 30p 6M/
1280×720 25p 6M

8 GB

64 GB

—
—
—
—
—
—
—
—
—
40 m
55 m
35 m
40 m
55 m

1 h 15 m
2h5m
1 h 15 m
2h5m
2 h 35 m
2 h 35 m
2 h 35 m
1 h 15 m
2h5m
6h
8 h 15 m
5h5m
6h
8 h 15 m

35 m

5 h 20 m

8 h 25 m

2 h 35 m

22 h

* only when [NTSC/PAL Selector] is set to [NTSC].
• Continuous movie shooting is possible for a maximum of approximately
29 minutes at one time with the camera’s default settings and when the ambient
temperature is approximately 25°C (77°F). The maximum continuous recording
time of an MP4 (28M) format movie is about 20 minutes (limited by the 4 GB file
size restriction).
• The recordable time of movies varies because the camera is equipped with VBR
(Variable Bit-Rate), which automatically adjusts image quality depending on the
shooting scene. When you record a fast-moving subject, the image is clearer but
the recordable time is shorter because more memory is required for recording.
The recordable time also varies depending on the shooting conditions, the subject
or the image quality/size settings.

Notes on using the camera
Functions built into this camera
• This camera is compatible with 1080 60p or 50p-format movies. Unlike standard
recording modes up to now, which record in an interlacing method, this camera
records using a progressive method. This increases the resolution, and provides a
smoother, more realistic image. Movies recorded in 1080 60p/1080 50p format
can be played back only on 1080 60p/1080 50p-supported devices.
• This camera is compatible with 4K 30p/4K 25p/4K 24p recording. Movies can be
recorded in a higher resolution than HD format.
• While aboard an airplane, set [Airplane Mode] to [On].

On use and care
Avoid rough handling, disassembling, modifying, physical shock, or impact such as
hammering, dropping, or stepping on the product. Be particularly careful of the lens.

Notes on recording/playback
• Before you start recording, make a trial recording to make sure that the camera is
working correctly.
• The camera is neither dust-proof, nor splash-proof, nor water-proof.
• Do not expose the camera to sunlight or shoot sunward for a long time. The internal
mechanism may be damaged.

• If moisture condensation occurs, remove it before using the camera.
• Do not shake or strike the camera. It may cause a malfunction and you may not be
able to record images. Furthermore, the recording media may become unusable or
image data may be damaged.

Do not use/store the camera in the following places
• In an extremely hot, cold or humid place
In places such as in a car parked in the sun, the camera body may become
deformed and this may cause a malfunction.
• Storing under direct sunlight or near a heater
The camera body may become discolored or deformed, and this may cause a
malfunction.
• In a location subject to rocking vibration
• Near a location that generates strong radio waves, emits radiation or is strongly
magnetic place. Otherwise, the camera may not properly record or play back
images.
• In sandy or dusty places
Be careful not to let sand or dust get into the camera. This may cause the camera to
malfunction, and in some cases this malfunction cannot be repaired.

On carrying
GB

• Do not sit down in a chair or other place with the camera in the back pocket of
your trousers or skirt, as this may cause malfunction or damage the camera.

ZEISS lens
The camera is equipped with a ZEISS lens which is capable of reproducing sharp
images with excellent contrast. The lens for the camera has been produced under a
quality assurance system certified by ZEISS in accordance with the quality
standards of ZEISS in Germany.

Notes on the monitor, electronic viewfinder and lens
• The monitor and electronic viewfinder are manufactured using extremely highprecision technology, and over 99.99% of the pixels are operational for effective
use. However, some tiny black and/or bright dots (white, red, blue or green) may
appear on the monitor and electronic viewfinder. These dots are a normal result of
the manufacturing process, and do not affect the recording.
• Do not hold the camera by the monitor or the viewfinder.
• Take care that your fingers or other objects are not caught in the lens when it is
operating.
• Take care that your finger is not in the way when pushing the viewfinder down.
• Do not forcibly push down the viewfinder when the eyepiece is pulled out.
• If water, dust or sand adheres to the viewfinder unit, it may cause a malfunction.

Notes on shooting with the viewfinder
This camera is equipped with an Organic Electro-Luminescence viewfinder with
high resolution and high contrast. The camera is designed to provide an easily
viewable viewfinder by appropriately balancing various elements.
• The image may be slightly distorted near the corners of the viewfinder. This is not
a malfunction. When you want to check every detail of the entire composition, you
can also use the monitor.
• If you pan the camera while looking into the viewfinder or move your eyes
around, the image in the viewfinder may be distorted or the color of the image may
change. This is a characteristic of the lens or display device and is not a
malfunction. When you shoot an image, we recommend that you look at the center
area of the viewfinder.

Notes on the flash
• Do not carry the camera by the flash unit, or use excessive strength on it.
• If water, dust or sand get into the open flash unit, it may cause a malfunction.
• Take care that your finger is not in the way when pushing the flash down.

Sony accessories
Use only genuine Sony brand accessories, otherwise it may cause a malfunction.
Sony brand accessories may not come to market for some countries or regions.

On camera’s temperature
Your camera and battery may get hot due to continuous use, but it is not a
malfunction.
GB

On the overheat protection
Depending on the camera and battery temperature, you may be unable to record
movies or the power may turn off automatically to protect the camera.
A message will be displayed on the screen before the power turns off or you can no
longer record movies. In this case, leave the power off and wait until the camera and
battery temperature goes down. If you turn on the power without letting the camera
and battery cool down enough, the power may turn off again or you may be unable
to record movies.

On charging the battery
• If you charge a battery that has not been used for a long time, you may be unable
to charge it to the proper capacity.
This is due to the battery characteristics. Charge the battery again.
• Batteries which have not been used for more than a year may have become
deteriorated.

Warning on copyright
• Television programs, films, videotapes, and other materials may be copyrighted.
Unauthorized recording of such materials may be contrary to the provisions of the
copyright laws.
• To prevent [Copyright Info] from being used illegally, leave [Set Photographer]
and [Set Copyright] blank when you lend or transfer the camera.
• Sony bears no responsibility for any trouble or damage caused by unauthorized
use of [Copyright Info].

No guarantee in the case of damaged content or recording failures
Sony can provide no guarantees in the event of failure to record or loss or damage of
recorded images or audio data due to a malfunction of the camera or recording
media, etc. We recommend backing up important data.

Cleaning the camera surface
Clean the camera surface with a soft cloth slightly moistened with water, then wipe
the surface with a dry cloth. To prevent damage to the finish or casing:
– Do not expose the camera to chemical products such as thinner, benzine, alcohol,
disposable cloths, insect repellent, sunscreen or insecticide.

Maintaining the monitor
• Hand cream or moisturizer left on the monitor may dissolve its coating. If you get
any on the monitor, wipe it off immediately.
• Wiping forcefully with tissue paper or other materials can damage the coating.
• If fingerprints or debris are stuck to the monitor, we recommend that you gently
remove any debris and then wipe the monitor clean with a soft cloth.

Notes on wireless LAN

We assume no responsibility whatsoever for any damage caused by unauthorized
access to, or unauthorized use of, destinations loaded on the camera, resulting from
loss or theft.

Notes on security when using wireless LAN products
• Always make sure that you are using a secure wireless LAN to avoid hacking,
access by malicious third parties, or other vulnerabilities.
• It is important that you set the security settings when using a wireless LAN.
• If a security problem arises because no security precautions are in place or due to
any inevitable circumstances when using a wireless LAN, Sony bears no
responsibility for the loss or damage.

Notes on High Frame Rate shooting
Playback speed
The playback speed will vary as below depending on the assigned [
and [
Record Setting].
Frame Rate

24p 50M*

240fps/250fps

10 times slower

480fps/500fps

20 times slower

960fps/1000fps

40 times slower

Frame Rate]

Record Setting
30p 50M/
60p 50M/
25p 50M
50p 50M
8 times slower/
4 times slower/
10 times slower
5 times slower
16 times slower/
8 times slower/
20 times slower
10 times slower
32 times slower/
16 times slower/
40 times slower
20 times slower

* only when [NTSC/PAL Selector] is set to [NTSC].

[

Priority Setting] and recordable duration
Priority Setting

Quality Priority

Shoot Time Priority

Frame Rate
240fps/250fps
480fps/500fps
960fps/1000fps
240fps/250fps
480fps/500fps
960fps/1000fps

Effective pixel
number read out
Recordable
from image
duration
sensor
1824 × 1026
1676 × 566
Approx. 2 seconds
1136 × 384
1676 × 566
1136 × 384
Approx. 4 seconds
800 × 270

Notes
• Sound will not be recorded.
• The movie will be recorded in XAVC S HD format.

Specifications
Camera
[System]
Image device: 13.2 mm × 8.8 mm
(1.0 type) CMOS sensor
Effective pixel number of camera:
Approx. 20.1 Megapixels
Total pixel number of camera:
Approx. 21.0 Megapixels
Lens: ZEISS Vario-Sonnar T 2.9×
zoom lens
f = 8.8 mm – 25.7 mm (24 mm –
70 mm (35 mm film equivalent))
F1.8 (W) – F2.8 (T)
While shooting movies (HD 16:9):
25.5 mm – 74 mm*1
While shooting movies (4K 16:9):
28 mm – 80 mm
*1
When [
SteadyShot] is set to
[Standard]
SteadyShot: Optical
File format (Still images): JPEG (DCF,
Exif, MPF Baseline) compliant,
RAW (Sony ARW 2.3 Format),
DPOF compatible
File format (Movies):
XAVC S format (XAVC S format
compliant):
Video: MPEG-4 AVC/H.264
Audio: LPCM 2ch (48 kHz 16 bit)
AVCHD format (AVCHD format
Ver. 2.0 compatible):
Video: MPEG-4 AVC/H.264
Audio: Dolby Digital 2ch,
equipped with Dolby Digital Stereo
Creator
• Manufactured under license from
Dolby Laboratories.
GB

Movies (MP4 format):
Video: MPEG-4 AVC/H.264
Audio: MPEG-4 AAC-LC 2ch
Recording media: Memory Stick PRO
Duo media, Memory Stick Micro
media, SD cards, microSD memory
cards
Flash: Flash range (ISO sensitivity
(Recommended Exposure Index)
set to Auto):
Approx. 0.4 m to 10.2 m
(1.31 ft. to 33.46 ft.) (W)/
Approx. 0.4 m to 6.5 m
(1.31 ft. to 21.33 ft.) (T)

[Input/Output connectors]
HDMI connector: HDMI micro jack
Multi/Micro USB Terminal*:
USB communication
USB communication: Hi-Speed USB
(USB 2.0)
* Supports Micro USB compatible
device.

[Viewfinder]
Type: Electronic viewfinder (Organic
Electro-Luminescence)
Total number of dots:
2 359 296 dots
Frame coverage: 100%
Magnification: Approx. 0.59 ×
(35 mm-format equivalent) with
50 mm lens at infinity, –1 m–1
Eye point: Approx. 20 mm from the
eyepiece, approx. 19.2 mm from
the eyepiece frame at –1 m–1
Diopter adjustment:
–4.0 m–1 to +3.0 m–1

[Monitor]

[Wireless LAN]

LCD monitor:
7.5 cm (3.0 type) TFT drive
Total number of dots:
1 228 800 dots

Supported standard: IEEE 802.11 b/g/n
Frequency: 2.4 GHz
Supported security protocols: WEP/
WPA-PSK/WPA2-PSK
Configuration method: Wi-Fi Protected
Setup™ (WPS) / manual
Access method: Infrastructure Mode
NFC: NFC Forum Type 3 Tag
compliant

[Power, general]
Power: Rechargeable battery pack
NP-BX1, 3.6 V
AC Adaptor AC-UB10C/UB10D,
5V
Power consumption:
Approx. 1.9 W (during shooting
with the monitor)
Approx. 2.3 W (during shooting
with the viewfinder)
Operating temperature: 0 °C to 40 °C
(32 °F to 104 °F)
Storage temperature: –20 °C to +60 °C
(–4 °F to +140 °F)
Dimensions (CIPA compliant)
(Approx.):
101.6 mm × 58.1 mm × 41.0 mm
(4 inches × 2 3/8 inches ×
1 5/8 inches) (W/H/D)
Mass (CIPA compliant) (Approx.):
298 g (10.5 oz) (including NP-BX1
battery pack, Memory Stick PRO
Duo media)
Microphone: Stereo
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III:
Compatible

Model No. WW481040

AC Adaptor AC-UB10C/UB10D
Power requirements: AC 100 V to
240 V, 50 Hz/60 Hz, 70 mA
Output voltage: DC 5 V, 0.5 A

Rechargeable Battery Pack
NP-BX1
Battery type: Lithium-ion battery
Maximum voltage: DC 4.2 V
Nominal voltage: DC 3.6 V
Maximum charge voltage: DC 4.2 V
Maximum charge current: 1.89 A
Capacity: 4.5 Wh (1 240 mAh)
Design and specifications are subject to
change without notice.

Trademarks

• Memory Stick and
are
trademarks or registered trademarks
of Sony Corporation.
• XAVC S and
are
registered trademarks of Sony
Corporation.
• “AVCHD Progressive” and
“AVCHD Progressive” logotype are
trademarks of Panasonic Corporation
and Sony Corporation.
• Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
• The terms HDMI and HDMI HighDefinition Multimedia Interface, and
the HDMI Logo are trademarks or
registered trademarks of HDMI
Licensing LLC in the United States
and other countries.
• Windows is a registered trademark of
Microsoft Corporation in the United
States and/or other countries.
• Mac is a registered trademark of
Apple Inc. in the United States and
other countries.
• iOS is a registered trademark or
trademark of Cisco Systems, Inc.
• iPhone and iPad are registered
trademarks of Apple Inc. in the
United States and other countries.
• SDXC logo is a trademark of SD-3C,
LLC.
• Android and Google Play are
trademarks of Google Inc.
• Wi-Fi, the Wi-Fi logo, Wi-Fi
Protected Setup are registered
trademarks of the Wi-Fi Alliance.
• The N Mark is a trademark or
registered trademark of NFC Forum,
Inc. in the United States and in other
countries.
• DLNA and DLNA CERTIFIED are
trademarks of Digital Living
Network Alliance.

• Facebook and the “f” logo are
trademarks or registered trademarks
of Facebook, Inc.
• YouTube and the YouTube logo are
trademarks or registered trademarks
of Google Inc.
• Eye-Fi is a trademark of Eye-Fi, Inc.
• In addition, system and product
names used in this manual are, in
general, trademarks or registered
trademarks of their respective
developers or manufacturers.
However, the ™ or ® marks may not
be used in all cases in this manual.

Additional information on this
product and answers to frequently
asked questions can be found at
our Customer Support Website.

Printed in China

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2015:05:01 10:50:12Z
Author                          : Sony Corporation
Creator                         : FrameMaker 7.1
Title                           : DSC-RX100M4
Modify Date                     : 2018:01:12 04:03:56Z
Producer                        : 3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Page Count                      : 44
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools

DSC RX100M4 Sony RX100 IV Manual For Sonys Premium Compact Camera

Navigation menu

Versions of this User Manual:

Views

Navigation