[INSIDE FRONT COVER] Spraymiser Parts Catalogue (en) 9196 Rev 1
User Manual: Spraymiser Parts Catalogue (en) 9196 rev 1
Open the PDF directly: View PDF 
.
Page Count: 26
| Download | |
| Open PDF In Browser | View PDF |
Parts Catalogue Publication Part No: 9196 Revision: 1 3 Edition Notice Prepared and printed by or on behalf of: This publication covers the following products: Spraymiser CDA All Models and accessories Spraymiser HiFlo All Models and accessories This document is prepared for Micron Sprayers Ltd. their agents and clients. The document should be taken in its entirety. No responsibility can be accepted, nor can consent be assumed for the part reproduction, editing, extract or quotation taken out of context of this document. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of Micron Sprayers Ltd. Copyright © Micron Sprayers Ltd. December 2015 Whilst every effort has been made to ensure the accuracy of this document, any errors or inaccuracies should be reported to Micron Sprayers Ltd. or their agents. Bromyard Industrial Estate Bromyard Herefordshire HR7 4HS U.K. T +44 (0)1885 482397 F +44 (0)1885 483043 E enquiries@micron.co.uk www.micron.co.uk Micron Group is a trading name of Micron Sprayers Ltd. Company Registration No. 00529633 England & Wales Micron Sprayers Ltd. Spraymiser 4 Table of Contents 1 2 2.1 Spraymiser Sub-Assemblies............................................................................................ 6 Subframes Covers and Fixings ....................................................................................... 8 Subframes, Hinges and Fixings....................................................................................... 8 2.2 Cover Components ......................................................................................................... 10 3 3.1 Spray-Heads Nozzles and Ancillaries ........................................................................... 12 CDA Spray-Head Assembly and Ancillaries................................................................. 12 3.2 HiFlo Nozzle-Bodies and Ancillaries ............................................................................. 14 4 4.1 Controllers And Backplates ........................................................................................... 15 Controllers, Lamp Type, 2 and 3-Way ........................................................................... 16 4.2 Backplate Assemblies, 2, 4 and 6-Way ......................................................................... 18 4.3 Hose and Cable Assemblies 2 and 3-Way .................................................................... 20 4.4 Power Wire Assembly ..................................................................................................... 21 5 Mounting Components ................................................................................................... 22 Micron Sprayers Ltd. Spraymiser 5 Only use spare parts recommended by Micron Group, their agents and/or distributors. The use of parts not specifically recommended by micron group, their agents and/or distributors may void any warrantee agreements. Spare parts should only be fitted by suitably qualified and/or experienced persons. When ordering spare parts, please specify the following information: Serial number of system/unit. Approximate date of manufacture. Description of part. Part number as shown in this section. Quantity required. For spare parts and accessories contact: Bromyard Industrial Estate Bromyard Herefordshire HR7 4HS U.K. T +44 (0)1885 482397 F +44 (0)1885 483043 E enquiries@micron.co.uk www.micron.co.uk Or your authorised agent: Agent / Distributor details: Micron Sprayers Ltd. Spraymiser 6 1 SPRAYMISER SUB-ASSEMBLIES 7 3 8 9 1 5 4 2 6 Figure 1 – Spraymiser Sub-Assemblies Micron Sprayers Ltd. Spraymiser 7 Spraymiser Sub-Assemblies ITEM DESCRIPTION Refer to 1 CDA SUBFRAME COMPONENTS Section 2.1 2 HIFLO SUBFRAME COMPONENTS Section 2.1 3 CDA COVER COMPONENTS Section 2.2 4 HIFLO COVER COMPONENTS Section 2.2 5 CDA SPRAY-HEADS AND ANCILLARIES Section 3.1 6 HIFLO NOZZLE BODIES AND ANCILLARIES Section 3.2 7 CONTROLLERS AND BACKPLATES Section 4 8 CDA HOSE AND CABLE ASSEMBLIES Section 4.3 9 MOUNTING COMPONENTS Section 5 Micron Sprayers Ltd. Spraymiser 8 2 SUBFRAMES COVERS AND FIXINGS 2.1 Subframes, Hinges and Fixings 1 2 3 4 5 8 6 7 9 8 9 10 21 23 22 24 11 12 18 18 13 19 14 20 15 16 26 25 17 Figure 2 – Subframes, Hinges and Fixings Micron Sprayers Ltd. Spraymiser 9 Subframes, Hinges and Fixings - Parts List ITEM PART NO. DESCRIPTION 1 ZS023 SUBFRAME, SPRAYMISER 1200 CDA, FIXED 2 ZS056 SUBFRAME, SPRAYMISER 1400 CDA, FIXED 3 ZS059 SUBFRAME, SPRAYMISER 1600 CDA, FIXED 4 ZS032 SUBFRAME, SPRAYMISER 1800 CDA, FIXED 5 ZS042 SUBFRAME, SPRAYMISER 1800 CDA, FOLDING 6 ZS049 SUBFRAME, SPRAYMISER 2000 CDA, FIXED 7 ZS052 SUBFRAME, SPRAYMISER 2000 CDA, FOLDING 8 ZS040 SUBFRAME, SPRAYMISER CDA FOLDING WING, RHS 9 ZS041 SUBFRAME, SPRAYMISER CDA FOLDING WING, LHS 10 ZS063 SUBFRAME, SPRAYMISER 1200 HIFLO, FIXED 11 ZS071 SUBFRAME, SPRAYMISER 1500 HIFLO, FIXED 12 ZS098 SUBFRAME, SPRAYMISER 2000 HIFLO, FIXED 13 ZS074 SUBFRAME, SPRAYMISER 2000 HIFLO, FOLDING 14 ZS100 SUBFRAME, SPRAYMISER 2000 HIFLO WING 15 ZS084 SUBFRAME, SPRAYMISER 2400 HIFLO, FIXED 16 ZS087 SUBFRAME, SPRAYMISER 2400 HIFLO, FOLDING 17 ZS088 SUBFRAME, SPRAYMISER 2400 HIFLO WING 18 UF020 BOLT, 3/8 X 1 1/2 BSW, HEX, BZP 19 UF017 BOLT, 1/4" BSW x 1 1/2", BZP 20 UF053 1-4x1-1-4x16G ZP FLAT WASHER 21 UF022 BOLT, 3/8" X 2 1/2" HEX 22 ZS039 HINGE, WING 23 UF029 NUT, 3/8 BSW, NYLOC, BZP 24 ZS038 HINGE, CENTRE 25 UF028 NUT, 1/4" BSW, NYLOC, BZP 26 UF090 3/8 UNC NYLOC THIN NUT, BZP Micron Sprayers Ltd. Spraymiser 10 2.2 Cover Components 1 4 2 5 3 6 7 2 3 1 2 3 8 9 2 3 Figure 3 Cover Components Micron Sprayers Ltd. Spraymiser 11 Cover Components - Parts List ITEM PART NO. DESCRIPTION 1 RH002 JOINT COVER, ALUMINIUM FLAT 50 X 2 2 UF035 POP-RIVET6-8 3 UF002 WASHER, FLAT, 3/16" X 1/2" X 20 G, BZP 4 UF054 SCREW, SELF-TAP, 10 AB x 1/2" 5 ZS066 SPRAYMISER CDA RECESS COVER 6 - CDA POLY COVER COMPONENTS 1 7 - CDA BRUSH AND ALUMINIUM COMPONENTS1 8 - HIFLO POLY COVER COMPONENTS1 9 - HIFLO BRUSH AND ALUMINIUM COMPONENTS1 1 Various options are available for replacement parts or repair materials. Please contact Micron Group to discuss your requirements. Micron Sprayers Ltd. Spraymiser 12 3 SPRAY-HEADS NOZZLES AND ANCILLARIES 3.1 CDA Spray-Head Assembly and Ancillaries 12 11 10 9 8 7 6 5 4 3 2 1 7 ZD004A 14 15 13 16 17 19 18 20 21 22 25 23 24 16 26 Figure 4 – CDA Spray-Head Assembly and Ancillaries Micron Sprayers Ltd. Spraymiser ZD004A 13 CDA Spray-Head Assembly and Ancillaries - Parts List ITEM PART NO. DESCRIPTION QTY. 1 ZU082 ATOMISER DRUM 1 2 5399 SCREW, PAN HEAD, NO.6 X 3/8" SS 4 3 MI046A MOTOR FRONT PLATE, GREEN 1 4 5398 O-RING (ULVA+ MOTOR SHAFT) 1 5 5403 O-RING (ULVA+ MOTOR BODY) 1 6 MI009 MOTOR (ULVA+) 1 7 FE015 TERMINAL, PUSH-ON, FEMALE 2 8 4368 WIRE, 1.0 mm, RED 0.24 m 9 4134 WIRE, 1.0 mm, BLACK 0.24 m 10 MI045 MOTOR HOUSING, GREEN 1 11 6717 BOOT, RUBBER 2 12 3512-20 BREATHER TUBE 1 13 ZD004A ATOMISER HEAD ASSEMBLY (DRUM TYPE) 1 14 ZU023 ELBOW EB4 (MODIFIED) 1 15 ZU089 FEED NOZZLE, BLUE (MODIFIED FOR ZD004A) 1 16 UF048 SCREW, 6-20 X 3/8" SELF TAP 8 17 ZU083 COVER, RECIRCULATING 1 18 ZS030 BRACKET, SPRAYMISER CDA HEAD 1 19 BI040 HOSE, 6 MM, SAMPAC, MICRO FLEXIBLE 0.24 m 20 BI027 ADAPTER 1/4" X 6 MM 1 21 HN024 RESTRICTOR, NO. 4 1 22 BI028 ADAPTER 1 23 BI040 HOSE, 6 MM, SAMPAC, MICRO FLEXIBLE 0.11 m 24 BI044 SOLENOID 1 25 AL014 ADAPTER, 1/8 BSP X 6 MM 2 26 ZE008 CONNECTOR, 3 WAY 1 Micron Sprayers Ltd. Spraymiser 14 3.2 HiFlo Nozzle-Bodies and Ancillaries 6 1 5 2 7 2 8 7 4 2 3 8 2 7 8 Figure 5 – HiFlo Nozzle-Bodies and Ancillaries ITEM PART NO. DESCRIPTION 1 AL034 HOSE CONNECTOR, 12 mm, PLUG 2 CL064 PRESSURE HOSE, 1/2" * 3 BI038 TEE, (T12) 1/2" 4 CL049 NOZZLE BODY, SINGLE, RIGHT HAND 5 CL055 NOZZLE BODY, DOUBLE 6 CL048 NOZZLE BODY, SINGLE, LEFT HAND 7 CL046 NOZZLE CAP AND GASKET SET, YELLOW 8 XR11002-VK Nozzle TIP, CERAMIC, 02 8 XR11003-VK Nozzle TIP, CERAMIC, 03 8 XR11004-VK Nozzle TIP, CERAMIC, 04 *State length required when ordering. Micron Sprayers Ltd. Spraymiser 15 4 CONTROLLERS AND BACKPLATES 2 1 5 4 3 7 8 6 Figure 6 – Controllers and Backplates ITEM PART NO. DESCRIPTION REFER TO 1 AA247 CONTROLLER, LAMP TYPE, 2 WAY Section 4.1 2 AA398 CONTROLLER, LAMP TYPE, 3 WAY Section 4.1 3 AA240 BACKPLATE ASSEMBLY, 2 WAY Section 4.2 4 AA243 BACKPLATE ASSEMBLY, 4 WAY Section 4.2 5 AA242 BACKPLATE ASSEMBLY, 6 WAY Section 4.2 6 ZC009 MOUNTING BRACKET 2 AND 4 WAY 7 ZC020 POWER WIRE ASSEMBLY, BACKPLATE 8 ZC009A BACKPLATE MOUNTING BRACKET - 6 WAY Section 4.3 Micron Sprayers Ltd. Spraymiser 16 4.1 Controllers, Lamp Type, 2 and 3-Way 12 14 1 4 2 13 3 4 4 15 16 5 17 18 20 19 6 7 8 4 9 10 21 11 22 23 Figure 7 – Controllers, Lamp Type, 2 and 3-Way Micron Sprayers Ltd. Spraymiser 17 Controllers, Lamp Type, 2 and 3-Way - Parts List ITEM PART NO. DESCRIPTION 1 DI002 FLOWMETER, 30 LITRES PER HOUR 2 DI004 FLOAT, FLOWMETER 3 ZU039 TRIMMER FOR FLOWMETER DI002 4 UF048 SCREW, 6-20 X 3/8" BZP 25PCRTC SELF TAP 5 ST003 GLOBE, 12V 5W 6 ST004 LAMP ASSEMBLY 7 GE034 FITTING, 20 mm, STRAIGHT 8 MO006 GROMMET, 15.9 mm 9 ZC011 FEED TUBE (CONTROL BOX) 10 BI027 ADAPTER 1/4" X 6 mm 11 AL002 PLUG, 1/4" BSPT M (EXTERNAL THREAD) 12 RO004 ENCLOSURE, 2 WAY CONTROL BOX 13 BI017 ELBOW, EB4 14 CB006 LABEL, CAUTION 12V 5W 15 ST005 SWITCH, TOGGLE 16 ZE006 CONNECTOR BLOCK, 5 WAY 17 ZC010A DIODE ASSEMBLY 18 BI040/50 HOSE 6 mm x 50 mm (2 WAY CONTROL BOX) 19 BI020 TEE, BARBED, 4 mm 20 ST030 PLUG, 3 PIN, S/M, COMPLETE 21 ZE013 CONNECTOR BLOCK, 7 WAY 22 RO018 ENCLOSURE, 3 WAY CONTROL BOX 23 FE008 GROMMET 24 ZC010 WIRING LOOM, 2 WAY CONTROL BOX 25 ZC042 WIRING LOOM, 3 WAY CONTROL BOX Micron Sprayers Ltd. Spraymiser 18 4.2 Backplate Assemblies, 2, 4 and 6-Way 4 6 5 9 7 8 1 10 11 16 15 9 3 12 17 13 14 2 18 Figure 8 – Backplate Assemblies, 2, 4and 6-Way Micron Sprayers Ltd. Spraymiser 19 Backplate Assemblies, 2, 4 and 6-Way- Parts List ITEM PART NO. DESCRIPTION 1 RO001 SUB-FRAME, 2 WAY 2 ZC024 SUB-FRAME, 4 WAY 3 RO022 BACKPLATE SUB-FRAME, 6 WAY 4 AL012 HOSE CONNECTOR, PLUG 5 NH004 COBRA CLIP 6 MT001 HOSE 6 MM X 115 MM 7 AL008 BRANCH TEE, 6 mm, MALE 8 AL009 ELBOW, 6 mm, MALE 9 UF048 SCREW, 6-20 X 3/8" BZP 25PCRTC SELF TAP 10 ST031 SOCKET, 3 PIN, S/M, COMPLETE 11 ST013 SOCKET, 2 PIN, S/M, COMPLETE 12 ST007 GROMMET 13 ZC022 BACKPLATE FEED WIRE 14 ST008 PLUG, 2 PIN (MALE), INLINE 15 AL001 SOCKET, 1/4" BSPT F, Q/R 16 GB007 O-RING, 6 X 3 17 RO002 BRANCH TEE 6 mm (MODIFIED FROM AL008) 18 AL003 PLUG, 1/4" BSPT F, INTERNAL THREAD Micron Sprayers Ltd. Spraymiser 20 4.3 Hose and Cable Assemblies 2 and 3-Way 1 2 3 5 4 6 7 8 Figure 9 – Hose and Cable Assemblies 2 and 3-Way ITEM PART NO. DESCRIPTION 1 ZS025 4.0 m Hose & Cable Assembly SM1200 2 ZS025/15 4.5 m Hose & Cable Assembly SM1200 3 ZS025/18 5.4 m Hose & Cable Assembly SM1200 4 ZS025/22 6.7 m Hose & Cable Assembly SM1200 5 ZS102/13 4.0 m 3-Head Spraymiser Hose & Cable assembly 6 ZS102/15 4.5 m 3-Head Spraymiser Hose & Cable assembly 7 ZS102/18 5.4 m 3-Head Spraymiser Hose & Cable assembly 8 ZS102/22 6.7 m 3-Head Spraymiser Hose & Cable assembly Micron Sprayers Ltd. Spraymiser 21 4.4 Power Wire Assembly 1 2 4 3 5 Figure 10 – Power Wire Assembly ITEM PART NO. DESCRIPTION QTY. 1 ST009 SOCKET, 2 PIN, INLINE 1 2 GE035 SWITCH, INLINE 1 3 GE021 LUG 2 4 ST001 FUSE HOLDER 1 5 ST002 FUSE, 10A 1 Micron Sprayers Ltd. Spraymiser 22 5 MOUNTING COMPONENTS 1 9 2 3 10 4 5 11 6 9 12 7 13 14 8 15 16 Figure 11 – Mounting Components Micron Sprayers Ltd. Spraymiser 23 Mounting Components - Parts List ITEM PART NO. DESCRIPTION QTY. 1 ZS082 MOUNTING ADAPTER SQUARE TO SQUARE 1 2 ZV004 MOUNTING ADAPTER SQUARE TO ROUND 1 3 ZV018 MOUNTING ADAPTER ROUND 1 4 ZS055 MOUNTING ADAPTER SQUARE 1 5 ZS077 VERTICAL MOUNTING TUBE, SQUARE 1 6 ZS024 VERTICAL MOUNTING TUBE, ROUND 1 7 ZS026 ATV TOW BALL MOUNTING ASSEMBLY 1 8 ZS026A ATV TOW BALL MOUNTING ASSEMBLY 1 9 ZU015 CLAMP BOLT 2 10 UF021 BOLT, 3/8" X 2" 4 11 UF029 NUT, 3/8 BSW, NYLOC BZP 4 12 UF030 1/2 NYLOC NUT 1 13 ZS093 ATV TOW BALL BRACKET - SQUARE TUBE 1 14 ZS094 ATV TOW BALL BRACKET - ROUND TUBE 1 15 UF037 BOLT BSW 1/2" X 1/2" 1 16 ZS092 ATV TOW BALL MOUNT ARM 1 Micron Sprayers Ltd. Spraymiser NOTES Micron Sprayers Ltd. Spraymiser Copyright © Micron Sprayers Ltd. 2015 General Enquiries: Australian Enquiries: Micron Group Bromyard Industrial Estate, Bromyard, Herefordshire, HR7 4HS, U.K. Micron Group P.O. Box 1246, Berri 5343, South Australia T +61 (0)8 8582 4077 E enquiries@enviromist.com.au T +44 (0)1885 482397 F +44 (0)1885 483043 E enquiries@micron.co.uk
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : TPY Sander Company : Microsoft Create Date : 2015:07:03 09:11:43+01:00 Modify Date : 2015:07:03 09:14:21+01:00 Source Modified : D:20150703081125 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2015:07:03 09:14:21+01:00 Creator Tool : Acrobat PDFMaker 10.1 for Word Document ID : uuid:b355df4a-8f83-4fbf-b19f-a42e00a9d5e8 Instance ID : uuid:0c608ceb-6836-4be8-8c89-429e61cd0771 Subject : 2 Format : application/pdf Title : [INSIDE FRONT COVER] Creator : TPY Sander Producer : Adobe PDF Library 10.0 Page Layout : TwoPageRight Page Mode : UseOutlines Page Count : 26EXIF Metadata provided by EXIF.tools