5_Spring Loaded Till (Oprater Manual) Spring Tillers

Operator Manual - Fieldking Spring Loaded Tillers Operator Manual - Fieldking Spring Loaded Tillers

User Manual: Spring Loaded Tillers

Open the PDF directly: View PDF .
Page Count: 23

Download
Open PDF In Browser	View PDF

Tillage

Haulage

Landscaping

Crop Protection

Harvest

Post Harvest

Seeding & Plantation
Solutions...
World Class Farm Equipment

Spring Loaded
Cultivator/ Tiller

BERI UDYOG PVT LTD
Corporate Office:
Plot No. 235 to 240, Sec-3, HSIIDC, Karnal- 132001 (Haryana), India
+91 184 2221571/ 72/ 73
info@fieldking.com, www.fieldking.com

?
Operator Manual ?
Service Manual ?
Part Catalogue

CONGRATULATIONS!
You have invested in one of the best implements of its type in the market today.
The care you give your “FIELDKING” implement will greatly determine your
satisfaction with its performance and its service life. A careful study of this manual
will give you a thorough understanding of your new implement before operating.
If your manual is lost or destroyed, “FIELDKING” will be glad to provide you a new
copy. Visit to nearest dealership & get a copy. Most of our manuals can also be
downloaded from our website at www.fieldking.com.
As an authorized “FIELDKING” dealer, we stock genuine “FIELDKING” parts which
are manufactured with the same precision and skill as our original equipment. Our
trained service persons are well informed on methods required to service
“FIELDKING” equipments and are ready to help you.
Should you require additional information or assistance, please contact us.

YOUR AUTHORIZED
FIELDKING DEALER

BECAUSE “FIELDKING” MAINTAINS AN ONGOING PROGRAMME
OF PRODUCT IMPROVEMENT, WE RESERVE THE RIGHT TO MAKE
IMPROVEMENTS IN DESIGN OR CHANGES IN SPECIFICATION
WITHOUT INCURRING ANY OBLIGATION TO INSTALL THEM ON
UNITS PREVIOUSLY SOLD. BECAUSE OF THE POSSIBILITY THAT
SOME PHOTOGRAPHS IN THIS MANUAL WERE TAKEN OF
PROTOTYPE MODELS, PRODUCTION MODELS MAY VARY IN
SOME DETAIL. IN ADDITION, SOME PHOTOGRAPHS MAY SHOW
SHIELDS REMOVED FOR THE PURPOSE OF CLARITY. NEVER
OPERATE THIS IMPLEMENT WITHOUT ALL SHIELDS IN PLACE.

TO THE PURCHASER
This manual contains valuable information about your new “FIELDKING” spring
loaded cultivator/tiller. It has been carefully prepared to give you helpful suggestions
for operating, adjusting, servicing and ordering spare parts.
Keep this manual in a convenient place for quick and easy reference. Study it
carefully. You have purchased a dependable and sturdy spring loaded
cultivator/tiller but only by proper care and operation you can expect to receive the
service and long life designed and built into it.
Sometime in the future your spring loaded cultivator/tiller may need new parts to
replace which are worn out or broken. If so, go to your dealer and provide him
equipment’s detail like model and part number.

PURCHASER / OPERATOR’S RESPONSIBILITY
1. Read and understand the information contained in this manual.
2. Operate, lubricate, assemble and maintain the equipment in accordance with all
instructions and safety procedures in this manual.
3. Inspect the equipment and replace or repair any parts that are damaged or worn
out which under continued operation would cause damage, wear to other parts,
or cause a safety hazard.
4. Return the equipment or parts to the authorized “FIELDKING” dealer, from where
it was purchased, for service or replacement of defective parts that are covered
by warranty. (The “FIELDKING” Factory may inspect equipment or parts before
warranty claims are honored.)
5. All costs incurred by the dealer for traveling to or transporting the equipment for
warranty inspection and claims will be borne by the customer.

CUSTOMER INFORMATION
Name ______________________________________________
Purchased From ______________________________________
Date of Purchase _____________________________________
Model No. ___________________________________________
Serial No. ___________________________________________

INDEX
1.

TECHNICAL DATA
1.1

Introduction

1.2

Warranty

1.3

When the warranty becomes void

1.4

Warning

USAGE INSTRUCTIONS
2.1

Before use & adjustments

2.2

Attaching cultivator/tiller to the tractor

2.3

Safety

MAINTENANCE
3.1

Operation, care & maintenance of cultivator/tiller

3.2

Storage of machine after work

PARTS CATALOGUE

1. TECHNICAL DATA
1.1 INTRODUCTION
Spring loaded cultivators/tiller are eminently suitable for use in stone and root
obstructed soil. When one tyne strikes a hidden object, too firmly fixed to be
moved, the others continue to work at the correct depth. Spring loaded
cultivators/tiller may be used for loosening and aerating soil to a depth of nine
inches preparing seed beds quickly and economically.
“FIELDKING” extra heavy duty spring loaded cultivator/tiller is designed for
tougher operations. It is suitable for varying soil conditions. Spring loaded tyne
assemblies derive their strength from heavy duty angles, which once fixed to
the immensely strong main frame, cannot move or strain out of position.
PRINCIPLE OF OPERATION OF SPRING TYNE CULTIVATORS/TILLERS

OBSTACLE ENCOUNTERED

•

Manufacturing defects: Breaking of any structure & fabrication covered
under warranty.

5. Warranty shall not apply to the following:
•

Accidental cases are not covered under warranty.

NOTE: If any kind of breakage and damage is found due to poor handling of
customer that also is not covered under warranty policy.

ORIGINAL STAGE

1.2 WARRANTY POLICY FOR FILEKIDNG TILLER/CULTIVATOR
1. Beri Udyog Pvt. Ltd.(“ the company”) warrants to the retail purchase of the
“FIELDKING” tiller/ cultivator that subject to the limitation specified here in
below, the company’s authorised dealer will repair or replace any part there
of found. In its opinion, to be defective in materials of workmanship. The
warranty shall be for a period 1 year from the date of purchase of new
“FIELDKING” agriculture tiller/cultivator by the original purchaser (“retail
purchaser”).
2. This warranty is limited to the delivery to the retail purchaser, free at the
authorized dealer’s workshop or company’s works of the part or parts
whether repaired or replaced in exchange for those acknowledge by the
company to be defective.
3. The purchaser of “FIELDKING” agriculture tiller/cultivator are advised
strictly to follow the instructions given in the operator manual, provided by
the company along with the “FIELDKING” tiller/cultivator at the time of
delivery, changes if any in the “FIELDKING” tiller/cultivator, resulting in
improper usage will not be covered in the warranty, This warrant will
1

4. Warranty shall apply to following:

6. The retail purchaser shall be required to make a thorough examination of
the products prior to the purchase. The authorized dealer are in no way the
legal agent of the company and have no right or authority to give any
warranty or assume any obligation on behalf of the company or bind the
company in any manner whatsoever.

GROUND
FIRST STAGE

automatically get terminated on the expiry of warrant period even in the
“FIELDKING” tiller/cultivator, may not in use for any time during the warranty
period for any reason whatsoever including any technical reasons, any time for
such repairs/replacements of parts and in transit, whether under this warranty
or otherwise shall not be excluded from the warranty period.

7. For the purpose of this warranty, the term ‘’product” means and includes
only new “FIELDKING” tiller/cultivator, manufactured by or for the company
design and drawing and sold and installed by the authorized dealer.
8. The company’s responsibility is limited to the terms of this warranty and it
shall not be liable for personal injuries or consequential or resulting liability,
damage or loss arising from any defect.
9. The company’s liability under this warranty is depended upon the strict
observance by the retail purchase, of the following provisions.
•

The retail purchaser at the time of delivery shall sign complete and return
the authorized warranty and dealer’s delivery report.

•

All the parameters should be thoroughly checked as per the scheduled
maintenance in the operator’s manual. The customers are also bound to
use the genuine spares for “FIELDKING” tiller/cultivator, purchased from
authorized “FIELDKING’ dealers.

•

Repairs and replacements will be performed by the facility of the authorized
dealers/its branch dealers.

•

This warranty shall not apply if the product or any part there of repaired or
altered not in accordance with our standard repair procedure or by any
person other than an Authorized Dealers/its branch dealers/its authorized
service centre.

•

The decision of the company or the concerned authorized dealers in regard
to the warranty shall be final and conclusive and the retail purchaser hereby
agrees to unconditionally accept their decision on all.

•

This warranty does not cover any applicable taxes payable on any parts
which the company may supply or repairs free of cost of during the warranty
period. This warranty also does not cover the cost of packaging to and fro
freight and transportation charges etc. on the defective “FIELDKING”
tiller/cultivator or other part of the “FIELDKING” tiller/cultivator sent to
“FIELDKING” dealers locations.

•

Claims arising from this warranty will be considered only if they are notified
in writing to the concerned authorized dealers after the defect has been
ascertained.

•

The company reserves the right to make changes in design or introduce
any improvement or add any parts on the products any time without
incurring any obligation to install the same on products previously sold.

This warranty shall not be apply to defect/damages caused by the normal
wear and tear, accident, transportation, misuser or neglect usage in non
agric applications, defect in the products which have been altered outside
the company’s work or which have been let out in hire or the identification
marks in which have been altered or removed. Company’s decisions in this
respect will be final and binding on all.
11. The above warranty is in lieu of all other warranties express or implied, and
no person, agent or representative of the Company is authorized to give
any other warranties on the company’s behalf or the assume for it any other
liability in connection, with the product.
12. The court at Karnal shall have exclusive jurisdiction to try, entertain and
dispose of all proceeding relating to any dispute arising between the
company and the retail purchaser on the liability of the company under
this warranty.
1.3 WHEN THE WARRANTY BECOMES VOID
1. Besides the caused specified in the supply agreement, the warranty shall in
any case become void.
2. Should there have been a maneuver error.

10. This contract will be ineffective and incorporative if:

3. When following repairs made by the customer without authorization from
the manufacture or owing to the installation of spurious spare parts, the
machine is subject to variations and the damage can be ascribed to these
variations.

•
•

4. When the user failed to comply with the instructions in the operator’s
handbook.

The dully warranty card is not presented during the repairs.
The “FIELDKING” agriculture tiller/cultivator or any parts thereof is
subjected to neglect, fire, floods or other acts of god or in the company’s
opinion any damage has caused to be “FIELDKING” agriculture
tiller/cultivator during transportation.

5. When the implement has been used beyond the specified power limit like
(tractor horse power).

•

The original numbers are removed, obliterated or altered from the unit.

6. No warranty will be given if the service is not done on time.

•

Any attempt is made to have the repairs executed by a person, other than
the company’s or its authorized representatives.

•

Any defect if not informed immediately to the company or its authorized
representative, any alterations in the warranty card is made.

•

The use of replacement parts not manufactured or supplied by the
company will automatically invalidate this warranty.
3

1.4 WARNING
Thoroughly read the instruction manual before proceeding with the various
operations.
Maintain the harrow as per the instructions of this handbook to be entitled for
warranty.

2.3 SAFETY

2. USAGE INSTRUCTIONS
2.1 BEFORE USE & ADJUSTMENTS

REMEMBER SAFETY FIRST

Before mounting of cultivator make sure that all nuts & bolts are properly secured.
Also determine soil and trash conditions of the field and make the preliminary
adjustments. e.g.
Tyne leveling
To eliminate uneven working and side draft, leveling is done by means of top link.
Depth control
The depth at which the implement is required to work is controlled hydraulically by
raising or lowering the control lever on the tractor.

2.2 ATTACHING THE CULTIVATOR/TILLER TO THE TRACTOR

Operator must read the instruction manual before operating the cultivator. Do
not allow anyone to operate this equipment who has not fully read and
comprehended this manual and who has not been properly trained in the safe
operation of the equipment.
SAFETY INSTRUCTIONS:
1.

1. Place the cultivator duly leveled on the flat piece of land.
2. Reverse the tractor to the cultivator ( Do not drag the cultivator/tiller up the
tractor)

3. Attach the left arm of the tractor to the cultivator/tiller first.

4. Attach the central arm to the cultivator/tiller. To attach, turn the screws on both
sides to an equal length. If the arm is too short or too long, turn the screw to
adjust both at the same time until aligned with the hole on the central arm.

5. Attach the lower right arm, turn the screw until the mounting pin is at the same
level as the hole on the tractor arm. If the gap between the hole and mounting
pin is too close or too distant, turn the control arm in or pull it away to an
appropriate distance. You may have to adjust both height and distance at the
same time. When the hole at tractor arm and mounting pin are even, insert the
pin in the hole and lock it with the lynch pin.
6. After attaching the cultivator/tiller, lift it and adjust the control arm parallel to
the ground. When you look from both rear or sideways, all shovel should be
touching the ground uniformly.

7.
8.
9.
10.
11.
12.

Danger:
In operating position the top link must
be higher on the machine side than on
the tractor side!

13.
14.

All equipment is potentially hazardous. There is no substitute for a safety
conscious operator who recognizes potential hazards and follows reasonable
safety practices.
Personal protection equipment including safety glasses, safety shoes, and
gloves are recommended during assembly, installation, operation, adjustment,
maintaining, repairing, removal or moving the implement.
Never place yourself between the tractor and implement while implement is in
operation.
Do not work under a raised implement unless it is securely blocked or held in
position. Do not depend on the tractor hydraulic system to hold the implement in
place.
A heavy load can cause instability of the tractor. Use extreme care during travel.
Slow down on turns and watch out for bumps. The tractor may need front counterweights to counter-balance the weight of the implement.
Do not allow others to ride on the tractor with an operator. Riders are subject to
injury such as being struck by foreign objects or being thrown off. Riders obstruct
the operator’s view resulting in unsafe operation. Never allow anyone to ride on
the implement!
Do not allow anyone who is not familiar with the safety rules and operation
instructions to use this implement.
Keep alert and watch the front as well as the rear when working with equipment.
Always be sure the implement is in the fully raised position when in transport.
When removing or adjusting equipment, be sure that your feet are never under the
implement.
Avoid excessive speed during operation.
Before you operate the field cultivator, check over all pins, bolts and connections
to be sure that all are securely in place. Replace any damaged or worn parts
immediately.
Make implement adjustments only when the implement is attached to the tractor.
Watch for and avoid hidden obstructions, i.e. buried pipes, rocks, uneven
concrete slabs, stumps etc., when operating equipment.

15. Never operate tractor and implement under trees with low hanging limbs.
Operators can be knocked off the tractor and then run over by the implement.
16. Operating spring loaded cultivator shanks may suddenly fling rocks and clods.
Keep all bystanders 10 meter away and operator must wear safety glasses.
17. Reduce speed when transporting mounted implements to avoid bouncing and
momentary loss of steering control.
18. It may be necessary to raise implement slightly and then lower to desired working
depth when tractor is moving.
19. Use extra care when working on slopes.
20. Never use alcoholic beverages or drugs which can hinder alertness or
coordination while operating this equipment. Consult your doctor about operating
this machine while taking prescription medications.

Non-observance of the above rules shall be considered negligence.
It will rule out any liability of the manufacturer for all possible
damage and / or consequences.
The user is solely responsible for any risk!
ATTENTION

MAINTENANCE

If cultivator has to remain unused for long time then clean it & apply a layer of
used oil for rust prevention.

These steps will enhance the life of your cultivator.

4. PARTS CATALOGUE
1. Extra Heavy Duty Spring Loaded
Tiller / Cultivator
2. Medium Duty Spring Loaded
Tiller / Cultivator (USA)
3. Beri Spring loaded
Tiller / Cultivator
4. Massey Spring loaded
Tiller / Cultivator
5. Heavy Duty Spring loaded
Tiller / Cultivator (Escort)

3.1 OPERATION, CARE & MAINTENANCE OF CULTIVATOR/ TILLER
1.

All the shovels of the tynes should be set at equal depth. To do this, place the
cultivator on level ground and see that all the shovel touch the ground.

Before commencing work with a cultivator, check it for loose bolts and nuts and
fasten them properly. After having taken all these precautions, run the cultivator
for one hour and then inspect it once more for any loose parts.

Never turn or reverse your tractor while cultivator is ploughed deep in field. This
will twist the assemblies out of alignment and damage them extensively.

Reverse or replace the shovel point when worn out. Delay may result in wearing
out of the tynes which will result into expensive repairing/replacements. Avoid use
of extra wide shovels as they do not improve tillage quality but only put extra load
on the tractor and also result into extra fuel consumption.

6. Heavy Duty Spring loaded
Tiller / Cultivator (Ford)

3.2.STORAGE OF CULTIVATOR/TILLER AFTER WORK
1.

Wash the cultivator after work.

Replace the worn out nuts & bolts.

SPRING WASHER (M12)
LINCH PIN

13
14

HEX. BOLT (M16X50X2P)

NYLOCK NUT (M12X1.75P)

NYLOCK NUT 25MM

SPRING WASHER M25

HEX. BOLT (M12X32X1.75P)

HITCH PIN

SMALL PAIR TYNE ASSEMBLY

NYLOCK NUT (M16X2P)

BIG PAIR TYNE ASSEMBLY

3 POINT LINKAGE ASSEMBLY

SPRING WASHER (M16)

FRAME ASSEMBLY

PARTS DESCRIPTION

SR.NO.

10020024

QTY

FKSLOEHD-508

9
10020022

10270003

10280005

10280025

10270005

10260016

10260060

10280008

10020019

FKSLOEHD-516

10270007

FKSLOEHD-15 FKSLOEHD-9 FKSLOEHD-11 FKSLOEHD-13 FKSLOEHD-15

FKSLOEHD-521

FKSLOEHD-506

FKSLOEHD-13

FKSLOEHD-512

FKSLOEHD-504

FKSLOEHD-11

FKSLOEHD-520

FKSLOEHD-502

FKSLOEHD-9

PART CODE

EXTRA HEAVY DUTY SPRING LOADED CULTIVATOR

EXTRA HEAVY DUTY SPRING LOADED CULTIVATOR
BIG PAIR TYNE ASSEMBLY

EXTRA HEAVY DUTY SPRING LOADED CULTIVATOR
SMALL PAIR TYNE ASSEMBLY

SMALL PAIR TYNE ASSEMBLY

BIG PAIR TYNE ASSEMBLY
SR. NO.

PART NAME

PART NUMBER

QTY.

SR.
NO.

PART NAME

PART NUMBER

QTY.

BIG PAIR (25mm)

FKSLOEHD-513

SMALL PAIR (25mm)

FKSLOEHD-517

TYNE ASSEMBLY (25mm)

FKSLOEHD-519

TYNE ASSEMBLY (25mm)

FKSLOEHD-519

SPRING (28.5 COIL)

FKSLOEHD-029

SPRING (28.5 COIL)

FKSLOEHD-029

SHOVEL

FKSLOEHD-030

HEX. BOLT (M18X65X1.5P)

10260083

HEX. BOLT (M18X65X1.5P)

10260083

SPRING WASHER (M18)

10270006

SPRING WASHER (M18)

10270006

NYLOCK NUT (M18X1.5P)

10280006

NYLOCK NUT (M18X1.5P)

10280006

SHOVEL BOLT 7/16X2.5""BSW

10260137

HEX. PLAIN NUT (7/16 BSW)

10280033

HEX. PLAIN NUT (7/16 BSW)

10280033

SHOVEL BOLT 7/16X2.5"BSW

10260137

TYNE BUSH

10070006

SHOVEL

TYNE BUSH

13
14

FRAME ASSEMBLY
BIG PAIR TYNE ASSEMBLY
SMALL PAIR TYNE ASSEMBLY
SPRING WASHER M12
HEX HEAD BOLT M12X35
NYLOCK NUT M12
HEX HEAD BOLT M16X50
SPRING WASHER M 16
NYLOCK NUT M 16
HEX HEAD BOLT M18X75
HEX NUT M 18X2.5
SPRING WASHER M18
3 POINT LINKAGE ASSEMBLY
HITCH PIN
LINCH PIN

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
FKSLOUSA-502
10020088
10020022

FKSLOUSA- 515
10020019
10020022

QTY.

5
4
36
36
36
2
2
2
2
2
2
1
2
2

6
5
44
44
44

7 TYNE 9 TYNE 11 TYNE

4
3
28
28
28

13 TYNE

FKSLOUSA-503
FKSLOUSA-504
10270003
10260006
10280025
10260078
10270005
10280005
10260036
10280037
10270006

11 TYNE
1

9 TYNE

FKSLOUSA-507 FKSLOUSA-501 FKSLOUSA-508 FKSLOUSA-509

7 TYNE

PART CODE

MEDIUM DUTY SPRING LOADED TILLER / CULTIVATOR (USA)

PARTS DESCRIPTION

SR.NO.

MEDIUM DUTY SPRING LOADED TILLER / CULTIVATOR (USA)

7
6
52
52
52

13 TYNE

MEDIUM DUTY SPRING LOADED TILLER / CULTIVATOR (USA)
BIG PAIR TYNE ASSEMBLY

MEDIUM DUTY SPRING LOADED TILLER / CULTIVATOR (USA)
SMALL PAIR TYNE ASSEMBLY

Sr. No.

PART NAME

Sr. No.

PART NAME

PART NUMBER

QTY

PART NUMBER

QTY

BIG PAIR TYNE ASSEMBLY

FKSLOUSA-503

4.1

SMALL PAIR TYNE ASSEMBLY

FKSLOUSA-504

SMALL PAIR(LHS & RHS)

FKSLOUSA-013,FKSLOUSA-0014

3.1

BIG PAIR ANGLE(LHS)

FKSLOUSA-006

3.2

BIG PAIR ANGLE(RHS)

FKSLOUSA-007

4.2

SUPPORT FLAT

FKSLOUSA-015

3.3

TYNE ASSEMBLY

FKSLOUSA-505

4.3

TYNE ASSEMBLY

FKSLOUSA-506

4.4

U CLAMP

FKSLOUSA-010

3.4

SHOVEL

FKSLOB-016

3.5

SHOVEL BOLT(7/16x2.5” BSW)

10260137

4.5

SHOVEL (BERI TYPE)

FKSLOB-016

4.6

SHOVEL BOLT(7/16X2.5”LBSW)

10260137

3.6

HEX PLAIN NUT

10280033

4.7

HEX PLAIN NUT(7/16 BSW

10280033

3.7

HEX HEAD BOLT M16X95

10260126

3.8

NYLOCK NUT M16

4.8

HEX HEAD BOLT M16X95

10260126

10280005

4.9

NYLOCK NUT M16

10280005

3.9

SPRING WASHER

10270005

4.10

SPRING WASHER

10270005

3.10

ANCHOR PIN

FKSLOB-031

4.11

ANCHOR PIN

FKSLOUSA-009

3.11

SPRING

FKSLOB-032

4.12

SPRING(10MM)

FKSLOB-032

3.12

BOLT M12x20

10260058

4.13

BOLT M 12X20

10260058

3.13

SPRING WASHER M12

10270003

4.14

SPRING WASHER M12

10270003

3.14

HEX HEAD BOLT M 12x80

10260080

4.15

BUSH(ANCHOR PIN)

FKSLOUSA-012

3.15

BUSH ( BIG PAIR)

FKSLOUSA-011

4.16

HEX NUT M 18

10280037

3.16

U CLAMP

FKSLOUSA-010

4.17

SPRING WASHER

10270006

17
18

HEX. BOLT (M12X32X1.75P)
SPRING WASHER (M12)
NYLOCK NUT (M12X1.75P)
HITCH PIN
LINCH PIN

11
12
13
14

HEX. BOLT (M16X50X2P)

NYLOCK NUT 25MM

NYLOCK NUT (M16X2P)

SPRING WASHER M25

SMALL PAIR TYNE ASSEMBLY

SPRING WASHER (M16)

BIG PAIR TYNE ASSEMBLY

3 POINT LINKAGE ASSEMBLY

FKSLOB-13

QTY

10020022

10280025

10270003

10020023

10280005
10260060

10260016
10270005

10280008

FKSLOB-515

10270007

FKSLOB-511

FKSLOB-522

FKSLOB-525 FKSLOB-526 FKSLOB-527

FKSLOB-15 FKSLOB-7 FKSLOB-9 FKSLOB-11 FKSLOB-13

FKSLOB-503 FKSLOB-505 FKSLOB-507

FKSLOB-11

PART CODE

BERI SPRING LOADED TILLER / CULTIVATOR

FKSLOB-517

FKSLOB-523 FKSLOB-524

FRAME ASSEMBLY(BOX)

FKSLOB-9

FKSLOB-501 FKSLOB-502

FKSLOB-7
FRAME ASSEMBLY(CHANNEL)

PARTS DESCRIPTION

SR.NO.

BERI SPRING LOADED TILLER / CULTIVATOR

FKSLOB-15

BERI SPRING LOADED TILLER / CULTIVATOR
BIG PAIR TYNE ASSEMBLY

BERI SPRING LOADED TILLER / CULTIVATOR
SMALL PAIR TYNE ASSEMBLY

PART NAME

SR. NO.

SR. NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14

PART NAME
BIG PAIR (L.H.S)
BIG PAIR (R.H.S)
KHADI TYNE ASSEMBLY OF BIG PAIR
ANCHOR PIN FOR PAIR'S
SPRING (10MM)
U-CLAMP
SHOVEL
HEX. BOLT (M16X95X2P)
SPRING WASHER (M16)
NYLOCK NUT (M16X2P)
HEX. BOLT (M12x20X1.75P)
SPRING WASHER (M12)
ROUND HEAD BOLT (7/16X1.75" BSW)
HEX. PLAIN NUT (7/16 BSW)

PART NUMBER
FKSLOB-518
FKSLOB-519
FKSLOB-512
FKSLOB-031
FKSLOB-032
FKSLOB-033
FKSLOB-016
10260081
10270005
10280005
10260058
10270003
10260136
10280033

QTY.
1
1
1
1
2
1
1
1
1
1
2
2
2
2

PART NUMBER

QTY.

SMALL PAIR (L.H.S)

FKSLOB-520

SMALL PAIR (R.H.S)

FKSLOB-521

KHADI TYNE ASSEMBLY OF SMALL PAIR

FKSLOB-516

ANCHOR PIN FOR PAIR'S

FKSLOB-031

SPRING (10MM)

FKSLOB-032

U-CLAMP

FKSLOB-033

SHOVEL

FKSLOB-016

HEX. BOLT (M16X95X2P)

10260081

SPRING WASHER (M16)

10270005

NYLOCK NUT (M16X2P)

10280005

HEX. BOLT (M12x20X1.75P)

10260058

SPRING WASHER (M12)

10270003

ROUND HEAD BOLT (7/16X1.75" BSW)

10260136

HEX. PLAIN NUT (7/16 BSW)

10280033

21
22

2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

SR.NO.
FKSLOM-9

FKSLOM-11

MASSEY SPRING LOADED TILLER / CULTIVATOR

FKSLOM-7

QTY

FKSLOM-7 FKSLOM-9 FKSLOM-11
1
FRONT PIPE FRAME ASSEMBLY
FKSLOM-508 FKSLOM-501 FKSLOM-510
1
REAR PIPE FRAME ASSEMBLY
FKSLOM-509 FKSLOM-502 FKSLOM-511
FKSLOM-503
1
3 POINT LINKAGE ASSEMBLY
FKSLOM-504
BIG PAIR TYNE ASSEMBLY
4
5
6
FKSLOM-505
SMALL PAIR TYNE ASSEMBLY
3
4
5
10260381
HEX HEAD BOLT M12X125X1.75MM
7
9
11
10270010
PLAIN WASHER 12MM
21
27
33
10280025
SPRING WASHER (M12)
21
27
33
10280025
NYLOCK NUT (M12X1.75P)
21
27
33
10260212
HEX HEAD BOLT M12X85X1.75MM
14
18
22
10260016
2
HEX. BOLT (M16X50X2P)
10270005
2
SPRING WASHER (M16)
10280005
2
NYLOCK NUT (M16X2P)
10020024
2
HITCH PIN
10280008
2
NYLOCK NUT 25MM
10270007
2
SPRING WASHER M25
10020022
2
LINCH PIN

PARTS DESCRIPTION

MASSEY SPRING LOADED TILLER / CULTIVATOR
PART CODE

MASSEY SPRING LOADED TILLER / CULTIVATOR
BIG PAIR TYNE ASSEMBLY

MASSEY SPRING LOADED TILLER / CULTIVATOR
SMALL PAIR TYNE ASSEMBLY

BOM Table

SR. NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22

PART NAME
BIG PAIR FLAT
ANCHOR PIN SLOTED
U-CLAMP ASSEMBLY FOR BIG PAIR
TINA SCREW
SPRING WASHER M10
PLAIN NUT M10
SAVY TYNE
TAPERED SPACER
HEX. BOLT (M16X2PX85L)
SPRING WASHER
PLAIN NUT 16X2
RIVIT
U-CLAMP
HEX. NUT (M12X1.5PX20L)
SPRING WASHER (M12)
SUPPORT ANGLE
BUSH (27X45L)
HEX. BOLT (M16X2PX85L)
SPRING (10mm)
SHOVEL
ROUND HEAD BOLT 7/16X1.75 INCH
SHOVAL NUT

PART NUMBER
FKSLOM-007
FKSLOM-008
FKSLOM-506
10260144
10270002
10280036
FKSLOBS-001
FKSLOM-010
10260384
10270005
10280022
FKSLOM-011
FKSLOM-012
10260128
10270003
FKSLOM-013
FKSLOM-014
10260383
FKSLOB-032
FKSLOB-016
10260136
10280022

QTY.
2
1
1
2
2
2
1
2
1
2
2
1
1
2
2
2
1
1
2
1
2
2

SR. NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22

BOM Table
PART NAME
SMALL PAIR FLAT
ANCHOR PIN SLOTED
U-CLAMP ASSEMBLY FOR SMALL PAIR
TINA SCREW
SPRING WASHER M10
PLAIN NUT M10
SAVY TYNE
TAPERED SPACER
HEX. BOLT (M16X2PX85L)
SPRING WASHER
PLAIN NUT 16X2
RIVIT
U-CLAMP
HEX. NUT (M12X1.5PX20L)
SPRING WASHER (M12)
SUPPORT ANGLE
BUSH (27X45L)
HEX. BOLT (M16X2PX85L)
SPRING (10mm)
SHOVEL
ROUND HEAD BOLT 7/17X1.75 INCH
SHOVAL NUT

PART NUMBER QTY.
FKSLOM-022
2
FKSLOM-008
1
FKSLOM-507
1
10260144
2
10270002
2
10280036
2
FKSLOBS-001
1
FKSLOM-010
2
10260384
1
10270005
2
10280022
2
FKSLOM-011
1
FKSLOM-012
1
10260128
2
10270003
2
FKSLOM-013
2
FKSLOM-014
1
10260383
1
FKSLOB-032
2
FKSLOB-016
1
10260136
2
10280022
2

25
26

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

PART CODE

QTY.

HEAVY DUTY SPRING LOADED TILLER / CULTIVATOR (ESCORT)

FKSLODE-7 FKSLODE-9 FKSLODE-11 FKSLODE-13 FKSLODE-15 FKSLODE-7 FKSLODE-9 FKSLODE-11 FKSLODE-13 FKSLODE-15
1
MAIN FRAME ASSEMBLY FKSLOD-501 FKSLOD-502 FKSLOD-503 FKSLOD-504 FKSLOD-505
FKSLODE02
1
3-POINT LINKAGE ASSEMBLY
FKSLODE03
BIG PAIR ASSEMBLY
4
5
6
7
8
FKSLODE04
SMALL PAIR ASSEMBLY
3
4
5
6
7
10020023
2
HITCH PIN
10270007
2
SPRING WASHER M 25
10280008
2
NYLOCK NUT M25
10260016
2
HEX BOLT(M16X50X2P)
10270005
2
SPRING WASHER (M 16)
10280005
2
NYLOCK NUT M16X2P
10260083
2
HEX BOLT(M18X65X1.5P)
10270006
2
SPRING WASHER (M 18)
10280006
2
NYLOCK NUT M18X1.5P
10260061
HEX HEAD BOLT M12X35X1.5
28
36
44
52
60
10280003
NYLOCK NUT M12X1.5
28
36
44
52
60
10270003
SPRING WASHER (M12)
28
36
44
52
60
10020022
2
LINCH PIN

SR.NO PART DESCRIPTION

HEAVY DUTY SPRING LOADED TILLER / CULTIVATOR (ESCORT)

27
28

HEAVY DUTY SPRING LOADED TILLER / CULTIVATOR (FORD)

HEAVY DUTY SPRING LOADED TILLER / CULTIVATOR (FORD)
QTY.
PART CODE
SR.NO
PART DESCRIPTION
FKSLODF-7
FKSLODF-9
FKSLODF-11
FKSLODF-13
FKSLODF-15 FKSLODF-7 FKSLODF-9 FKSLODF-11 FKSLODF-13 FKSLODF-15
1
1
FRAME
FKSLOD-514
FKSLOD-507
FKSLOD-508
FKSLOD-512
FKSLOD-513
FKSLODE02
1
2
3-POINT LINKAGE ASSEMBLY
FKSLODE03
3
BIG PAIR TYNE ASSEMBLY
4
5
6
7
8
FKSLODE04
4 SMALL PAIR TYNE ASSEMBLY
3
4
5
6
7
FKSLODF01D
2
5
REAR LINKAGE PLATE
FKSLODE-01D
2
6
FRONT LINKAGE PLATE
1
7
PIPE C CLASS SEAMLESS FKSLODF01A-7 FKSLODF01A-9-11 FKSLODF01A-9-11 FKSLODF01A-13 FKSLODF01A-15
FKSLODF01B
8
8
PIPE SUPPORT
FKSLODF01C
8
9
PIPE JOINTER
10260061
10
HEX HEAD BOLT M12X35
28
36
44
52
60
10260062
24
11
HEX HEAD BOLT M12X40
10280003
12
NYLOCK NUT M12X1.5
52
60
68
76
84
10270003
13
SPRING WASHER M12
52
60
68
76
76
10260083
2
14 HEX HEAD BOLT M18X65X1.5P
10260016
2
15 HEX HEAD BOLT M16X50X2P
10280006
2
16
NYLOCK NUT M18X1.5P
10270006
2
17
SPRING WASHER M18
10280005
2
18
NYLOCK NUT M16X2P
10270005
2
19
SPRING WASHER M16
10020023
2
20
HITCH PIN
10280008
2
21
NYLOCK NUT 25MM
10270007
2
22
SPRING WASHER M25
10020022
2
23
LINCH PIN

BIG PAIR TYNE ASSEMBLY

SMALL PAIR TYNE ASSEMBLY

BIG PAIR TYNE ASSEMBLY
SR NO
PART DESCRIPTION
1
BIG PAIR FLAT 50X8X800MM(l)
2
ANGLE SUPPORT OF 40X40X5X127
3
ANGLE SUPPORT OF 40X40X5X320
4
TYNE FORGING 50X19,430MML
5
TYNE U FLAT 37X10X330MM L
6
HEX HEAD BOLT M12X35
7
NYLOCK NUT M12
8
SPRING WASHER M12
9
ANCHOR PIN 25X178MM(GROOVE& TURNING)
10
TYNE TIKKI ROUND 12MM T
11
TYNE PATTI 50X10X108MM L
12
ANCHOR PIN 25X178MM(SINGLE TURNING)
13
SPRING 10MM WD,49MM OD,26 COILS
14
HEX HEAD BOLT M16X95X2MM
15
NYLOCK NUT M16X2MM
16
SPRING WASHER M16
17
HEX HEAD BOLT 12X20X1.75MM
18
SHOVEL 250MM L,8MM(T),57MM WD
19
ROUND HEAD BOLT 7/16 X2.5 INCH
20
MS NUT 7/16 BSW
21
AINTH PATTI
22
PLAIN WASHER 20MM
23
SPLIT PIN 4 MMX40MM(l)

SMALL PAIR TYNE ASSEMBLY
PART CODE
QTY
FKSLODE03A
2
FKSLODE03C
2
FKSLODE03E
2
FKSLODE03J-1
1
FKSLODE03H
1
10260061
4
10280003
4
10270003
6
10020018
1
FKSLODE03G
2
FKSLODE03F
1
10020017
1
FKSLOB-032
2
10260081
1
10280005
1
10270005
1
10260275
2
FKSLOB-016
1
10260137
2
10280033
2
FKSLODEO3D
2
10270012
2
10020078
2

SR NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23

PART DESCRIPTION
PART CODE
BIG PAIR FLAT 50X8X533MM(l)
FKSLODE04A
SUPPORT OF 40X40X5X130 WITH 1 HOLE
FKSLODE03M
SUPPORT OF 40X40X5X130 WITH 20HOLE
FKSLODE03N
TYNE FORGING 50X19,430MML
FKSLODE03J-1
TYNE U SMALL 37X10X254MM L
FKSLODE03I
HEX HEAD BOLT M12X35
10260061
NYLOCK NUT M12
10280003
SPRING WASHER M12
10270003
ANCHOR PIN 25X178MM(DOUBLE TURNING)
10020016
TYNE TIKKI ROUND 12MM T
FKSLODE03G
TYNE PATTI 50X10X108MM L
FKSLODE03F
ANCHOR PIN 25X178MM(GROOVE)
10020051
SPRING 10MM WD,49MM OD,26 COILS
FKSLOB-032
HEX HEAD BOLT M16X95X2MM
10260081
NYLOCK NUT M16X2MM
10280005
SPRING WASHER M16
10270005
HEX HEAD BOLT 12X20X1.75MM
10260275
SHOVEL 250MM L,8MM(T),57MM WD
FKSLOB-016
ROUND HEAD BOLT 7/16 X2.5 INCH
10260137
MS NUT 7/16 BSW
10280033
AINTH PATTI
FKSLODEO3D
PLAIN WASHER 20MM
10270012
SPLIT PIN 4 MMX40MM(l)
10020078

QTY
2
2
2
1
1
4
4
6
1
2
1
1
2
1
1
1
2
1
2
2
2
2
2

DELIVERY CHECKLIST
Dealer Pre-Delivery (Please Tick)

Please Complete all Dealer information Below

1. Dealer Pre-Delivery Checklist
1.

The customer or person responsible has
been given the operator’s manual.

The customer undertakes to read the
c o m p l e t e o p e r a t o r ’s m a n u a l a n d
understands all aspects of the manual
before operation of the machine.

Dealer’s Name..............................................................................

Address........................................................................................
.......................................................................................................

State........................................... Postcode.................................
Phone.......................................... Fax..........................................

All safety, operational and maintenance
information have been explained and
demonstrated.

All greasing and oil points, stickers,
guarding and ID plate have been identified
and physically pointed out.

I confirm that the pre-delivery service was performed on this machine.

The customer agrees that it is his
responsibility to read and carry out the
safety, maintenance and operation as per
this operator’s manual.

Date..............................................................................................

Customer Delivery (Please Tick)

Please Complete all Customer Information Below

Email.............................................................................................
Service Person..............................................................................

Signature.......................................................................................

Comments.....................................................................................
.......................................................................................................
.......................................................................................................

2. Customer Delivery Checklist

Customer Information

The customer or person responsible has
been given the operator’s manual.

Customer’s Name.........................................................................

The customer undertakes to read the
c o m p l e t e o p e r a t o r ’s m a n u a l a n d
understands all aspects of the manual
before operation of the machine.

Dealer Information

Address........................................................................................
.......................................................................................................

State........................................... Postcode.................................

Phone.......................................... Fax..........................................

All safety, operational and maintenance
information have been explained and
demonstrated.

Email.............................................................................................

All greasing and oil points, stickers,
guarding and ID plate have been identified
and physically pointed out.

I confirm that all of the delivery checks were explained and performed.

Delivery Person.............................................................................

Signature.......................................................................................

Delivery Date................................................................................

The customer agrees that it is his
responsibility to read and carry out the
safety, maintenance and operation as per
this operator’s manual.

WARRANTY CARD
Customer Copy
CUSTOMER NAME Mr./ Mrs :

ADDRESS

MOBILE NO.

NAME OF IMPLEMENT

MODEL NO.

YEAR OF Mfg.

SERIAL NO.

REGISTRATION NO.

DATE OF PURCHASING

NAME OF DEALER

Customer`s Signature

Dealer`s Signature

BERI UDYOG PVT LTD
Corporate Office:
Plot No. 235 to 240, Sec-3, HSIIDC, Karnal- 132001 (Haryana), India
+91 184 2221571/ 72/ 73
info@fieldking.com, www.fieldking.com

WARRANTY CARD
Company Copy
CUSTOMER NAME Mr./ Mrs :

ADDRESS

MOBILE NO.

NAME OF IMPLEMENT

MODEL NO.

YEAR OF Mfg.

SERIAL NO.

REGISTRATION NO.

DATE OF PURCHASING

NAME OF DEALER

Customer`s Signature

Dealer`s Signature

BERI UDYOG PVT LTD
Corporate Office:
Plot No. 235 to 240, Sec-3, HSIIDC, Karnal- 132001 (Haryana), India
+91 184 2221571/ 72/ 73
info@fieldking.com, www.fieldking.com

WARRANTY CARD
Dealer Copy
CUSTOMER NAME Mr./ Mrs :

ADDRESS

MOBILE NO.

NAME OF IMPLEMENT

MODEL NO.

YEAR OF Mfg.

SERIAL NO.

REGISTRATION NO.

DATE OF PURCHASING

NAME OF DEALER

Customer`s Signature

Dealer`s Signature

BERI UDYOG PVT LTD
Corporate Office:
Plot No. 235 to 240, Sec-3, HSIIDC, Karnal- 132001 (Haryana), India
+91 184 2221571/ 72/ 73
info@fieldking.com, www.fieldking.com

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 23
Create Date                     : D:20150619061757Z
Modify Date                     : D:20150619061757Z
Producer                        : Corel PDF Engine Version 14.0.0.567
Author                          : Administrator
Creator                         : CorelDRAW
Title                           : 5_Spring Loaded Till (Oprater Manual).cdr

EXIF Metadata provided by EXIF.tools

5_Spring Loaded Till (Oprater Manual) Spring Tillers

Operator Manual - Fieldking Spring Loaded Tillers Operator Manual - Fieldking Spring Loaded Tillers

Navigation menu

Versions of this User Manual:

Views

Navigation