TB40 0025 Stratagy Hospitality Application Software Tech Bulletin (30)
Stratagy Tech Bulletin %2830%29 The Eye | File Listing
User Manual: Stratagy Tech Bulletin (30)
Open the PDF directly: View PDF 
.
Page Count: 18
| Download | |
| Open PDF In Browser | View PDF |
726+,%$ Stratagy® Technical Bulletin TB40-0025 (Revised TB40-0022 Bulletin) March, 2000 4100045 Stratagy Hospitality Application Software The Stratagy Voice Processing Hospitality Application software, available for use on all Stratagy systems, is designed to work in conjunction with any hotel/motel program. The software automatically programs mailboxes required for basic hotel/motel guest and administration (e.g., front desk, room service, etc.) messaging. This bulletin provides you with information on installing the Hospitality Application on the Stratagy, integrating the Stratagy with the hotel/motel program, and examples of User ID mailboxes. This bulletin also gives information specific to the Toshiba Hospitality Management Information System (HMIS) product to assist you in installing and configuring the Stratagy Hospitality Application with the HMIS. This bulletin covers the following subjects: Subject See... Hardware Page 2 Stratagy Hospitality Application Call Flow for HMIS Page 3 Installation Step 1: Configure Stratagy for SMDI Page 3 Step 2: Configure the Integration Patterns Page 4 Custom SMDI Integration Packets Page 5 Step 3: Add Custom Integration Packets for: PC-based Stratagy Systems Page 7 Stratagy DK and Stratagy Flash Systems Page 9 Step 4: Set up the Hospitality Application User ID Mailboxes Stratagy Guest Messaging Page 12 Delete All Messages Page 16 Step 5: Record User ID Mailbox Greetings Page 17 Step 6: Set up Guest Room User ID Mailboxes Page 18 Step 7: Set up Hotel Administration Phones Page 18 Toshiba America Information Systems, Inc. Telecommunication Systems Division 9740 Irvine Blvd., Irvine, CA 92618-1697 (949) 583-3700 http://telecom.toshiba.com 1 of 18 Hardware TB40-0025 Hardware Basic hardware configurations consist of a Strata DK system, a dedicated telephone to perform Auto Wakeup (HMIS requirement), a PC with HMIS (or other hotel/motel program) software installed, and a Stratagy system with SMDI connection. See Figures 1~2 below. HMIS PC SMDR/TTY Strata HMIS HMIS Resident Software Stratagy PC Strata DK SMDI 4598 Figure 1 Auto Wakeup (delete message) Stratagy PC-based Systems HMIS PC Strata DK SMDR/TTY Strata HMIS HMIS Resident Software Auto Wakeup (delete message) 4599 Stratagy DK SMDI Stratagy Admin PC COM Port Figure 2 2 of 18 Stratagy DK Systems Stratagy Hospitality Application Software TB40-0025 Stratagy Hospitality Application Call Flow for HMIS Stratagy Hospitality Application Call Flow for HMIS Calls route to the user mailbox via standard Strata DK call forwarding, using the standard Simplified Message Desk Interface (SMDI) Call Forward integration packet for the guest room telephone. Whenever a guest checks into the hotel, the Strata HMIS system resets the call forwarding on the guest room telephone to Call Forward Busy/No Answer (CFBNA). When the guest room telephone receives a call and the telephone is in CFBNA mode, the call forwards to the guest room mailbox, enabling the caller to leave a message. If a guest chooses to not be disturbed, Call Forward-All Calls (CFAC) can be enabled on an individual room basis from the front desk terminal using the Strata HMIS system. Installation Installation of the Stratagy Hospitality Application software consists of the following steps: ♦ Step 1: Configure Stratagy for SMDI on Page 3. ♦ Step 2: Configure the Integration Packets on Page 4. ♦ Step 3: Add Custom Integration Packets to Stratagy on Page 7 ♦ Step 4: Set up the Hospitality Application User ID Mailboxes on Page 11. ♦ Step 5: Record User ID Mailbox Greetings on Page 17. ♦ Step 6: Set up Guest Room User ID Mailboxes on Page 18. ♦ Step 7: Set up Hotel Administration Phones on Page 18 Step 1: Configure Stratagy for SMDI Important! The Stratagy must be configured for SMDI integration when first setting up the Stratagy Voice Processing system. This sets all the proper message waiting notification for the user mailboxes. SMDI is the most efficient way of integrating Stratagy with a telephone system. SMDI relies on data, not DTMF, to provide detailed call information that Stratagy can quickly use to direct callers to user’s mailboxes. Data messages or packets are sent into the system to provide information concerning the type of call that is ringing into Stratagy. For detailed instructions on connecting, enabling and configuring Stratagy for SMDI integration, see “SMDI Serial Integration” in Chapter 4 – Configuring Stratagy of the Stratagy R2 Installation and Maintenance Manual. Stratagy Hospitality Application Software 3 of 18 Installation TB40-0025 Step 2: Configure the Integration Packets To operate the Stratagy Hospitality Application properly, you must: ♦ Modify the default integration packets. ♦ Add several custom integration packets. The integration packets should appear in the same order as shown in Figure 3. If they do not, the Hospitality Application still functions; however, some minor problems do arise. For example, the Stratagy system may identify some messages as having come from the operator’s mailbox instead of from an outside party. This can be caused by having multiple integration packets that match the type of forwarding used. For instance, the first packet recognized by the Stratagy system had a “0,” where another integration packet didn’t. 3. System Integration Patterns Integration Timeout by 1/10: Forward from Ring No Answer: Forward from Ring No Answer: Forward from Ring No Answer: Forward from Ring No Answer: Forward from Ring No Answer: Forward from Ring No Answer: Forward from Ring No Answer: Forward from Ring No Answer: Forward from Ring No Answer: Forward from Ring No Answer: Forward from Ring No Answer: Forward from Ring No Answer: Forward from Ring No Answer: Forward from Ring No Answer: Forward from Ring No Answer: Direct call from extension: Forward from Busy extension: 30 Brr Brrr Brrrr Axxxxxx3rrrxxxxxxssss Bxxxxxx3rrrxxxxxxssss Nxxxxxx3rrrxxxxxxssss Axxxxxxrrrrxxxxxxssss Bxxxxxxrrrrxxxxxxssss Nxxxxxxrrrrxxxxxxssss Axxxxxx3rrr0000000000 Bxxxxxx3rrr0000000000 Nxxxxxx3rrr0000000000 Axxxxxxrrrr0000000000 Bxxxxxxrrrr0000000000 Nxxxxxxrrrr0000000000 Dxxxxxxxxxxxxxxxx3eee Dxxxxxxxxxxxxxxxx0bbb DTMF Internal Call to Administration Internal Call to Room Trunk Call to Administration Trunk Call to Room Direct Call to Stratagy from Administration Direct Call to Stratagy from Room 4601 Figure 3 4 of 18 Sample Integration Packets (4-digit room/4-digit administration) Stratagy Hospitality Application Software TB40-0025 Installation Custom SMDI Integration Packets Custom SMDI integration packets fall into three call types: ♦ Internal ♦ Trunk ♦ Direct All call integration packets consist of 21 alpha-numeric digits broken down into 1 alpha digit for call type, 10 digits for the destination of the call and 10 digits for the source of the call. Internal Calls Internal calls are calls placed between the rooms and the hotel administration (e.g., room service, front desk, etc.). In the example below, a ring no answer call (N) is directed to a four-digit administration extension (3rrr) from a four-digit room extension (ssss). Call Type N xxxxxx No Answer Fill-in Destination Source (10-digits long) (10-digits long) 3* rrr xxxxxx ssss Fill-in 4-digit room ext. 4-digit admin ext. * Leading digit. Can be any digit between 1~4. Trunk Calls Trunk calls are calls placed from the outside to either a room or the hotel administration. In the example below, an all calls forwarded call (A) is directed to a 3-digit room extension (rrr) from a 10-digit trunk call (0000000000). Call Type Destination Source (10-digits long) (10-digits long) A xxxxxxx rrr 0000000000 All calls forwarded Fill-in 3-digit room ext. 10-digit trunk call Direct Calls Direct calls are calls from a room or administration phone to the voice mail. In the example below, a direct call (D) is directed to voice mail (xxxxxxxxxx) from a four-digit administration extension (3eee). Call Type Destination Source (10-digits long) (10-digits long) D xxxxxxxxxx xxxxxx Direct call Fill-in Fill-in 3* eee 4-digit admin ext. * Leading digit. Can be any digit between 1~4. Stratagy Hospitality Application Software 5 of 18 Installation TB40-0025 Possible Configurations Table 1 shows the only possible room/administration configurations. ♦ 3-digit room, 4-digit administration ♦ 4-digit room, 4-digit administration ♦ 4-digit room, 3-digit administration These packets can be used as shown in the table with one exception. The leading digit used in the Administration extension (shown as 3 in these example packets) must be modified for your configuration (i.e., 1~4). Table 1 SMDI Intergration Packets 3-digit Room 4-digit Administration 4-digit Room 4-digit Administration 4-digit Room 3-digit Administration Internal Call to Administration Axxxxxx3rrrxxxxxxxsss Bxxxxxx3rrrxxxxxxxsss Nxxxxxx3rrrxxxxxxxsss Axxxxxx3rrrxxxxxxssss Bxxxxxx3rrrxxxxxxssss Nxxxxxx3rrrxxxxxxssss Axxxxxxx3rrxxxxxxssss Bxxxxxxx3rrxxxxxxssss Nxxxxxxx3rrxxxxxxssss Internal Call to Room Axxxxxxxrrrxxxxxxssss Bxxxxxxxrrrxxxxxxssss Nxxxxxxxrrrxxxxxxssss Axxxxxxrrrrxxxxxxssss Bxxxxxxrrrrxxxxxxssss Nxxxxxxrrrrxxxxxxssss Axxxxxxrrrrxxxxxxxsss Bxxxxxxrrrrxxxxxxxsss Nxxxxxxrrrrxxxxxxxsss Integration Group Trunk Call to Administration Trunk Call to Room Direct Call to Stratagy from Administration Direct Call to Stratagy from Room LEGEND: 6 of 18 Axxxxxx3rrr0000000000 Bxxxxxx3rrr0000000000 Nxxxxxx3rrr0000000000 Axxxxxxxrrr0000000000 Bxxxxxxxrrr0000000000 Nxxxxxxxrrr0000000000 Axxxxxxx3rr0000000000 Bxxxxxxx3rr0000000000 Nxxxxxxx3rr0000000000 Axxxxxxrrrr0000000000 Bxxxxxxrrrr0000000000 Nxxxxxxrrrr0000000000 Dxxxxxxxxxxxxxxxx3eee Dxxxxxxxxxxxxxxxx0bbb A = All Call Forward N = No Answer B or b = Busy D = Direct 3 = Leading digit (can be any number from 1~4) Dxxxxxxxxxxxxxxxxx3ee Dxxxxxxxxxxxxxxx0bbbb r = ring no answer e = direct dial s = where call came from x = wild card Stratagy Hospitality Application Software TB40-0025 Installation Step 3: Add Custom Integration Packets to Stratagy Once you have configured the integration packets, you must add them to the Stratagy system. This step covers: ♦ PC-Based Stratagy systems (see “Add Custom Integration Packets to PC-based Stratagy Systems” on Page 7) ♦ Stratagy DK and Stratagy Flash (see “Add Custom Integration Packets to Stratagy DK and Stratagy Flash Systems” on Page 9) Add Custom Integration Packets to PC-based Stratagy Systems 1. From the Main Menu, select Shutdown by pressing Alt+S. Stratagy prompts: Password? 2. Type the password and press Enter. (The default password is Stratagy, with the first letter uppercase.) Stratagy prompts: Shutdown the entire system? [NY] 3. Type Y to continue Stratagy reconfirms: ...or N to cancel shutdown and return to the Main Menu. 4. Type Y to continue ...or N to cancel shutdown and return to the Main Menu. Really SHUTDOWN the entire system? [NY] Stratagy starts shutdown. If any ports are in use, Stratagy delays shutting down the system for 60 seconds. At that time, Stratagy completes shutdown, cutting off any callers or users that are still active. 4075 When shutdown is complete, the system displays the Stratagy Configuration Utility Menu. 5. From the Stratagy Configuration Utility Menu, press 6 (Other Switch Integrations). 4100 Stratagy Hospitality Application Software 7 of 18 Installation TB40-0025 6. From the Other Switch Integration Menu, press 3 (System Integration Patterns). 4571 7. Using the arrow (↑↓) keys, highlight the first line that contains an SMDI integration packet. 4574 8. Press Enter. The line is moved to the upper left corner of the screen. 9. Based on the number of digits in the room and administration extensions, change the integration line to the one shown for Internal Call to Administration in Table 1 on Page 6. 10. Press Enter again. The line is restored to its original location. 11. Highlight the next integration packet line on the screen and repeat Substeps 8~10 for all required integration packets until the System Integration Patterns table looks like Figure 3 on Page 4. 8 of 18 12. Press Esc twice. The changes are saved and the Stratagy Configuration Utility screen displays. 13. Press Esc again. Stratagy reboots and the Main Menu displays. Stratagy Hospitality Application Software TB40-0025 Installation Add Custom Integration Packets to Stratagy DK and Stratagy Flash Systems 1. From the Main Menu, select Tools by pressing Alt+t. You are prompted to enter your password. 2. Type the password (the default password is Stratagy) and press Enter. 3233 3. Select option 4 (Telephone System Configuration). 3243 4. Select option 2 (Edit System Integration Patterns). 4571 5. Using the arrow (↑↓) keys, highlight the first line that contains an SMDI integration packet. 4574 6. Press Enter. Stratagy Hospitality Application Software The line is moved to the upper left corner of the screen. 9 of 18 Installation TB40-0025 7. Based on the number of digits in the room and administration extensions, change the integration line to the one shown for Internal Call to Administration in Table 1 on Page 6. 8. Press Enter again. The line is restored to its original location. 9. Highlight the next integration packet line on the screen and repeat Substeps 6~8 for all required integration packets until the System Integration Patterns table looks like Figure 3 on Page 4. 10. Press Esc. 3246 11. Select option 1 (Transmit file to Stratagy and restart Stratagy). The changes are transmitted to Stratagy DK/Stratagy Flash and Stratagy DK/Stratagy Flash is shutdown and restarted. By shutting down and restarting Stratagy, the changes take effect. 12. Press any key to reboot. 10 of 18 Stratagy Hospitality Application Software TB40-0025 Installation Step 4: Set up the Hospitality Application User ID Mailboxes The Stratagy Hospitality Application limits user access to features (i.e., listen, save, delete) by using Stratagy’s Token Programming language. The hotel guest never actually logs onto the guest room mailbox. Instead, to pick up messages, the guest dials the Master Distributed Hunt Directory Number of the Stratagy Voice Processing system. There are two features to the basic Stratagy Hospitality Application program—Stratagy Guest Messaging and Delete All Messages. Using one of several customized SMDI integration packets added to Stratagy (“Step 3: Add Custom Integration Packets to Stratagy” on Page 7) and busy chain of the guest room mailbox, the hotel guest’s call is sent to the “Mailbox Log On” User ID (default mailbox 1100) of the Stratagy Hospitality Application. This section lists the Hospitality Application software User ID mailboxes in numerical order (starting with 1100) along with, as a reference, the description in the Comment field. Each User ID mailbox includes the tokens being used and an explanation of each token’s operation. All of the User ID mailboxes for the Stratagy Hospitality Application should have the following options set, unless otherwise noted: Do Not Disturb: OFF Group 1: 99 (ensures User ID Mailboxes start at mailbox 1100) Group 2: 0 (except for User ID Mailbox 1100) User ID Mailboxes 1107, 1109, 1112, and 1114 The token string for the SMDI integration packet (to turn off the message waiting light on the guest room telephone) in these sample User ID mailboxes uses COM port 2 as the RS-232 connection to the Strata DK telephone system and a three-digit guest room extension. For example: @=(%S9,1)S(2,’RMV:MWI 0000000%S0!\D’)G(1110) COM Port 2 Important! Required Space 3-digit Room Extension If your installation uses a different COM port or a four-digit room extension, you must modify this token string. Stratagy Hospitality Application Software 11 of 18 Installation TB40-0025 Stratagy Guest Messaging Enables callers to leave messages for hotel guests. When the guest checks for messages, he/she can only listen to, save or delete the messages. The guests do not have access to any of the normal features available to the Stratagy business user. User ID Mailbox 1100: Mailbox Log On Comment MailboxLogOn Group 2 1 Extension @=(%S0,%P)=(%S9,1) @ Suppress normal process. =(%S0,%P) Create %S0 as the number of the previously accessed User ID Mailbox. =(%S9,1) Create %S9 with a value of 1. %S9 is the message number played. Done Chain 1111 RNA Chain 1101 (Allows access to this mailbox from other mailboxes.) User ID Mailbox 1101: Initial Menu Comment InitialMenu Extension @P(M,%S0)M(G1,2,40) @ Suppress normal process. P(M,%S0) Play the number of messages in User ID Mailbox %S0. M(G1,2,40) Play greeting 1 and wait for menu choice. Done Chain 1107 RNA Chain 999 Menu 1 1105 Menu 9 999 Greeting 1 “To play your messages press 1. To quit press 9.” User ID Mailbox 1102: Message Menu Comment MessageMenu Extension @M(G1,2,40) @ Suppress normal process. M(G1,2,40) Play greeting 1 and wait for menu choice. RNA Chain 999 Menu 1 1106 Menu 2 1105 Menu 3 1104 Menu 9 999 Greeting 1 “Press 1 to delete this message. Press 2 to hear this message again. Press 3 to hear the next message. Press 9 to quit.” 12 of 18 Stratagy Hospitality Application Software TB40-0025 Installation User ID Mailbox 1103: Decrement Message Number Comment DecrementMsgNmbr Extension @I(%S9,=,1,1108)+(%S9,-1) @ Suppress normal process. I(%S9,=,1,1108) If the value of %S9 is 1, go to User ID Mailbox 1109. +(%S9,-1) Decrease the value of %S9 by 1. RNA Chain 1108 User ID Mailbox 1104: Increment Message Number Comment IncrementMsgNumbr Extension @+(%S9,1) @ Suppress normal process. +(%S9,1) Increase the value of %S9 by 1. RNA Chain 1105 User ID Mailbox 1105: Play Message Comment PlayMessage Extension @P(MN%S9,%S0) @ Suppress normal process. P(MN%S9,%S0) Play message number %S9 out of User ID Mailbox %S0. Done Chain 1107 RNA Chain 1102 User ID Mailbox 1106: Delete Message Comment DeleteMessage Extension @KD(%S9,N,%S0)P(G1)M(G2,2,40) @ Suppress normal process. KD(%S9,N,%S0) Delete message number %S9 from User ID Mailbox %S0. P(G1) Play greeting 1. M(G2,2,40) Play greeting 2 and wait for menu choice. RNA Chain 999 Menu 1 1105 Menu 9 1112 Greeting 1 “Message deleted.” Greeting 2 “Press 1 to hear the next message or press 9 to quit.” Stratagy Hospitality Application Software 13 of 18 Installation TB40-0025 User ID Mailbox 1107: End of Messages Note This mailbox may need to be modified. See “User ID Mailboxes 1107, 1109, 1112, and 1114” on Page 11 for additional information on this mailbox. Comment EndOfMessages Extension @S(2,’RMV:MWI 0000000%S0!\D’)+(%S9,-1)M(G1,2,40) Change to appropriate COM port number. @ Suppress normal process. S(2,’RMV:MWI 0000000%S0!\D’) Turn off message waiting for User ID Mailbox %S0. +(%S9,-1) Decrease the value %S9 by 1. M(G1,2,40) Play greeting 1 and wait for menu choice. RNA Chain 999 Menu 1 1109 Menu 9 1112 Greeting 1 “Press 1 to hear saved messages or press 9 to quit.” User ID Mailbox 1108: Start Of Messages Comment StartOfMessages Extension @M(G1,2,40) @ Suppress normal process. M(G1,2,40) Play greeting 1 and wait for menu choice. RNA Chain 999 Menu 1 1109 Menu 9 999 Greeting 1 “End of messages. Press 1 to hear your saved messages or press 9 to quit.” User ID Mailbox 1109: Replay Messages Note This mailbox may need to be modified. See “User ID Mailboxes 1107, 1109, 1112, and 1114” on Page 11 for additional information on this mailbox. Comment ReplayMessages Extension @=(%S9,1)S(2,’RMV:MWI 0000000%S0!\D’)G(1110) Change to appropriate COM port number. @ Suppress normal process. =(%S9,1) Reset value %S9 to 1. S(2,’RMV:MWI 0000000%S0!\D’) G(1110) 14 of 18 Turn off message waiting for User ID Mailbox %S0. Go to User ID Mailbox 1110. Stratagy Hospitality Application Software TB40-0025 Installation User ID Mailbox 1110: Verify There Are Saved Messages Comment VerifyMessages Extension @I(%M(%S0),=,0,1111) @ Suppress normal process. I(%M(%S0),=,0,1111) RNA Chain If the number of messages in User ID Mailbox %S0 equal 0, go to User ID Mailbox 1111. 1105 User ID Mailbox 1111: No Saved Messages Comment NoMessages Extension @P(G1)G(999) @ Suppress normal process. P(G1) Play greeting 1. G(999) Go to User ID Mailbox 999 for hang up. Greeting 1 “You have no messages to listen to.” User ID Mailbox 1112: Turn Off Message Waiting Note See “User ID Mailboxes 1107, 1109, 1112, and 1114” on Page 11 for additional information on this mailbox. Comment TurnOffMWI Extension @S(2,’RMV:MWI 0000000%S0!\D’) Change to appropriate COM port number. @ Suppress normal process. S(2,’RMV:MWI 0000000%S0!\D’) Done Chain 999 RNA Chain 999 Stratagy Hospitality Application Software Turn off message waiting for User ID Mailbox %S0. 15 of 18 Installation TB40-0025 Delete All Messages When a guest checks out of the room, this application enables the Strata HMIS system to automatically delete all messages in the guest room mailbox. This application can also be run manually by the hotel staff without the Strata HMIS system. The following group of User ID Mailboxes deletes all messages from the guest room User ID Mailboxes when the guest checks out. To protect against accidental access to this application, group 1 for all of these mailboxes is 98. All other groups for these mailboxes are 0 except for User ID Mailbox 1113. User ID Mailbox 1113 has group 1 as 98 and group 2 is 1. This ensures the user accesses this application only from the beginning User ID Mailbox of 1113. User ID Mailbox 1113: Delete Messages Main Comment DeleteMsgsMain Extension @R(G1,%S0,70)P(G2)P(%S0)M(G3,2,40) @ Suppress normal process. R(G1,%S0,70) Play greeting 1. Store DTMF response from the caller as value %S0. P(G2) Play greeting 2. P(%S0) Play value %S0. M(G3,2,40) Play greeting 3 and wait for menu choice. RNA Chain 999 Menu 1 1114 Menu 2 1113 Menu 9 999 Greeting 1 “Please enter the room number to delete all messages from.” Greeting 2 “You entered ...” Greeting 3 “Press 1 to clear all messages from this mailbox. Press 2 to enter another mailbox or press 9 to quit.” Note For HMIS, create a mailbox on Stratagy with the same User ID as the Auto Wakeup telephone extension. Set the mailbox’s busy chain to 1113. User ID Mailbox 1114: Initialize Values Note See “User ID Mailboxes 1107, 1109, 1112, and 1114” on Page 11 for additional information on this mailbox. Comment InitializeValues Extension @=(%S5,1)=(%S6,%M(%S0))I(%S6,=,0,1116)S(2,’RMV:MWI 0000000%S0!\D’) Change to appropriate COM port number. @ Suppress normal process. =(%S5,1) Create %S5 with a value of 1. =(%S6,%M(%S0) Add the number of messages in User ID Mailbox %S0 to value %S6. I(%S6,=,0,1116) If value %S6 equals 0, go to User ID Mailbox 1115. S(2,’RMV:MWI 0000000%S0!\D’) RNA Chain 16 of 18 Turn off message waiting for User ID Mailbox %S0. 1115 Stratagy Hospitality Application Software TB40-0025 Installation User ID Mailbox 1115: Delete Messages Comment DeleteMessages Extension @KD(1,N,%S0)+(%S5,1)I(%S5,>,%S6,1116) @ Suppress normal process. KD(1,N,%S0) Delete message 1 from User ID Mailbox %S0. +(%S5,1) Increase the value of %S5 by 1. I(%S5,>,%S6,1116) RNA Chain If the value of %S5 is greater than the value of %S6, go to User ID Mailbox 1116. 1115 User ID Mailbox 1116: All Messages Deleted Comment AllMsgsDeleted Extension @P(%S6)P(G1)P(%S0)M(G2,1,70) @ Suppress normal process. P(%S6) Play value %S6. P(G1) Play greeting 1. P(%S0) Play value %S0. M(G2,1,70) Play greeting 2 and wait for menu choice. Done Chain 999 RNA Chain 999 Menu 1 1113 Menu 9 999 Greeting 1 “Messages deleted from mailbox...” Greeting 2 “Press 1 to clear another mailbox or press 9 to quit.” Step 5: Record User ID Mailbox Greetings Sample greetings are included for User ID mailboxes that require recorded greetings (see Table 2) . You may want to word the greeting differently; however, we recommend that you retain the substance of the sample greetings. Table 2 Sample Greetings User ID Mailbox Number 1101 1102 Sample Greeting Greeting 1 “To play your messages press 1. To quit press 9.” Greeting 1 “Press 1 to delete this message. Press 2 to hear this message again. Press 3 to hear the next message. Press 9 to quit.” Greeting 1 “Message deleted.” Greeting 2 “Press 1 to hear the next message or press 9 to quit.” Greeting 1 “Press 1 to hear saved messages or press 9 to quit.” 1106 1107 Stratagy Hospitality Application Software 17 of 18 Installation Table 2 TB40-0025 Sample Greetings User ID Mailbox Number 1108 1111 1113 Sample Greeting Greeting 1 “End of messages. Press 1 to hear your saved messages or press 9 to quit.” Greeting 1 “You have no messages to listen to.” Greeting 1 “Please enter the room number to delete all messages from.” Greeting 2 “You entered ...” Greeting 3 “Press 1 to clear all messages from this mailbox. Press 2 to enter another mailbox or press 9 to quit.” Greeting 1 “Messages deleted from mailbox...” Greeting 2 “Press 1 to clear another mailbox or press 9 to quit.” 1116 Step 6: Set up Guest Room User ID Mailboxes Note It is recommended that the guest room’s mailbox number match the guest room number. All of the User ID mailboxes for the corresponding guest rooms should have the Saved Message Queue set to NO. User ID Mailbox XXX: Guest Room XXX (where XXX = guest room number) Comment GuestRoomXXX Extension XXX (where XXX = guest room extension number) Busy Chain 1100 Step 7: Set up Hotel Administration Phones User ID Mailbox XXX: Hotel Administration Phones Comment AdminRoomXXX Extension 3XXX (where XXX = admin extension number) Notify Method 18 of 18 MSG ON @S(2,’OP:MWI 0000003%U!\D’) MSG OFF @S(2,’RMV:MWI 0000003%U!\D’) Stratagy Hospitality Application Software
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Producer : Acrobat Distiller 4.05 for Windows Title : TB40-0025 - Stratagy Hospitality Application Software Modify Date : 2002:05:23 16:26:55-07:00 Create Date : 1996:12:10 13:31:59 Creator : FrameMaker 6.0 Subject : Author : Toshiba TSD Page Count : 18 Page Mode : UseOutlines Page Layout : SinglePageEXIF Metadata provided by EXIF.tools