Surgical DU1000 And Site Preparation Product Catalog

User Manual: DU1000

Open the PDF directly: View PDF .
Page Count: 78

Download
Open PDF In Browser	View PDF

Product Catalog
For Site Preparation & Surgical Technologies

Table Of Contents
Introduction
Company Overview
Implant & Abutment System Connections
Implant Body & Connection Types
Certain® Platform Switching Implants
Surface Technologies
The 3i T3® Implant Family
The NanoTite™ Implant Family
The OSSEOTITE® Implant Family
Top-Down Treatment Planning

Site Preparation Technologies
i
ii
iv
v
vi
vii
vii
viii

Certain Internal Connection Implants
Tapered
3i T3 With DCD® Platform Switched
3i T3 With DCD Non-Platform Switched
3i T3 Platform Switched
3i T3 Non-Platform Switched
NanoTite Tapered Certain PREVAIL®
NanoTite Tapered Certain
OSSEOTITE Tapered Certain PREVAIL
Full OSSEOTITE Tapered Certain

1
1
1
1
3
3
4
4

Parallel Walled
3i T3 With DCD Platform Switched
3i T3 With DCD Non-Platform Switched
3i T3 Platform Switched
3i T3 Non-Platform Switched
NanoTite Certain PREVAIL
OSSEOTITE 2 Certain PREVAIL
NanoTite Parallel Walled Certain
OSSEOTITE 2 Parallel Walled Certain

2
2
2
2
5
5
6
6

External Hex Connection Implants
Tapered Implants
3i T3 Tapered With DCD
3i T3 Tapered
NanoTite Tapered
Full OSSEOTITE Tapered
OSSEOTITE Tapered

7
7
7
8
8

Parallel Walled
3i T3 Parallel Walled With DCD
3i T3 Parallel Walled
NanoTite Parallel Walled
OSSEOTITE 2 Parallel Walled
Full OSSEOTITE Parallel Walled
OSSEOTITE Parallel Walled

7
7
9
9
10
10

Healing Abutments
Certain Internal Connection
Encode® Two-Piece
EP One-Piece
®

12
13

External Hex Connection
BellaTek® Encode Two-Piece
EP One-Piece

15
16

Product Overview
DU1000 Surgical Drilling Unit
OSSEOCISION® Surgical Drilling Unit
Tapered Navigator® System For Guided Surgery
Parallel Walled Navigator System For Guided Surgery
Tapered Implant Surgical Kits
Parallel Walled Surgical Kits
ACT® Non-Irrigated Reusable Twist Drills
Surgical Drills
Drills, Quad Shaping Drills For Tapered Implants
Surgical Components
Handpiece Bone Profilers
Low Profile Abutment Bone Profilers
Certain Manual Bone Profilers
Bone Profiler Guide Pins
Bone Profiler Organizers & Kits
Bone Taps, Dense Bone Taps For Tapered Implants
Depth/Direction Indicators For Tapered Implants,
Direction Indicators, Mounts
Miscellaneous Instrumentation
Site Preparation Components
Straight And Angled Osteotomes,
Summer Osteotomes
Sinus Elevation, Trephine Burs

17
19
20
21
25
28
31
35
35
36
36
36
36
36
37
38
39

41
42

Regenerative Technologies
Product Overview
Allografts
RegenerOss® Allograft
RegenerOss Allograft Putty
RegenerOss Allograft Putty Plus
Xenografts
Endobon® Xenograft Granules
GBR Barriers
OsseoGuard® & OsseoGuard Flex® Membranes
Alloplasts
Biogran®
Autogenous
Safescraper® TWIST, R. Quétin Bone-Mill

Patient Education Products

43
45
46
46
47
47
47
47
48

Additional Information
Important Product Information For Dental Implants
Important Product Information For Restorative Products
Index
Ordering Form
Ordering Information

49
50
51
64
66

Introduction
Company Overview
Providing Solutions – One Patient At A Time™

Mission Statement:
BIOMET 3i will be recognized as a global leader in the oral reconstruction marketplace.
We will achieve this through superior customer support and continuous product innovation.

Headquartered in Palm Beach Gardens, Florida, with
operations throughout the world, BIOMET 3i is one of
the leading companies in the oral reconstruction
market. Of equal importance, BIOMET 3i brings the
same innovation, high standards and comprehensive
approach to customer service, dental practice and
laboratory support and education.

BIOMET 3i pioneered the development of biologically
driven implants, winning worldwide acclaim for the
micro-textured OSSEOTITE® surface and then the nanoscaled, Bone Bonding® NanoTite™Surface Implants.
The tradition of implant innovation continues with the
introduction of the 3i T3® Implant, a contemporary
hybrid that is designed for sustainable aesthetics.

BIOMET 3i offers one of implant dentistry’s most
comprehensive lines of implants and abutments,
augmented by a growing line of site preparation, digital,
restorative and regenerative products.

This spirit of innovation continues with the introduction
of DIEM®2, a protocol to enable clinicians to pursue
immediate provisionalization options for full arch
patient cases.

i

Introduction
Implant & Abutment System Connections
Certain® Internal Connection
The internal connection aspect of the implant and abutment are designed
for ease of use and simplicity.
• QuickSeat® Connection: It Clicks! The Certain Implant and Abutment
Systems feature the QuickSeat Connection. This unique connection
produces an audible and tactile “click” that confirms placement of
Impression Copings and Abutments.

• Abutment fingers cause the “click” and also provide retention for the
prosthetic components in the implant before the screw is placed. A screw
is needed to fully seat the components when the restoration is being
tried in or definitively placed.

• The 6/12 hex inside the internal connection incorporates both a 6-point
single and a 12-point double hex. The 6-point single hex has two
functions: engaging the driver tip for mountless delivery during implant
placement and providing anti-rotation for all straight abutments.
The 12-point double hex provides 30º rotational positioning for preangled abutments.

• Impression Copings: Pick-Up and Twist Lock™Transfer Copings are
available in the Certain Internal Connection design, in three EP®
(Emergence Profile) diameters and a straight diameter to match the
corresponding Healing Abutment. The Impression Copings also “click”
when properly seated. These copings have a different finger design that
engages 2mm internally into the implant, as compared to the abutment’s
design that engages 4mm deep into the implant. This shorter engagement
into the implant is important because it allows off-axis draw for implant
impressions that are divergent.

(purple)

(blue)

(yellow)

(green)

3.4mm

4.1mm

5mm

6mm

• Color-Coding: Certain Implants and all interfacing components are
color-coded by restorative platform diameter for easy identification
and selection.

ii

Introduction
Implant & Abutment System Connections
External Hex Connection
The external hex connection implant and abutment designs have been
widely used in implant dentistry.
• Gold Standard ZR (Zero Rotation) is a patented design incorporating
machined microstops within the corners of the hex in the abutment.
The design reduces horizontal rotation between the implant and
abutment. Gold Standard ZR is available on UCLA, GingiHue® and
Conical Abutments.

• The 12-point double hex, which is machined in the 15º Pre-Angled
GingiHue Abutment, provides rotational positioning in 30º increments
on the implant hex.

• Precise Abutment Placement: The ASYST Abutment Placement Tool
provides fingertip control for fast and easy abutment delivery. The
patented packaging design makes abutment placement easier because the
abutment is delivered sterile from the package directly to the implant site.
The abutment and abutment screw are packaged inside the plastic ASYST
seating device. The plastic seating device facilitates precise placement of
the abutment on the implant, thus reducing chair time. The ASYST Tool is
packaged with Low Profile, Standard and Conical Abutments.

• Impression Copings: Pick-Up and Twist Lock™ Transfer Copings are both
available in the external connection design in three EP® (Emergence
Profile) diameters and a straight diameter to match the corresponding
healing abutment. The patented Twist Lock design provides a more
accurate transfer of the implant connection as compared to other
transfer (closed tray) techniques. This unique Twist Lock feature provides
a series of undercuts to guide the coping into the impression, giving
stability to the impression coping/analog prior to pouring the impression.
As a result, the copings lock into orientation grooves upon clockwise
rotation, thereby allowing for a tactile sensation of resistance that ensures
an accurate hex transfer.

iii

Introduction
Icon Descriptions:

Implant Body & Connection Types

The following icons are used to represent
the connection type of the implant system:

Internal

Internal Connection

External Connection

External

Certain® Internal Connection Tapered
Implants & External Hex Connection
Tapered Implants
Tapered Implants closely approximate the shape of a natural tooth root
with a thread design that produces an anchoring “bite in bone”
response. These implants are available in the 3i T3® Contemporary
Hybrid, NanoTite™and OSSEOTITE® Surface configurations.

Internal Connection

External Connection

Certain Internal Connection Implants &
External Hex Connection Parallel Walled
Implants
Parallel Walled Implants feature a unique ICE™Self-Tapping Design.
These implants are available in the 3i T3 Contemporary Hybrid,
NanoTite and OSSEOTITE Surface configurations.

iv

Introduction
Certain® Platform Switching Implant
Overview
created an implant system that is designed to help
clinicians in the pursuit of crestal bone preservation. The Certain
Platform Switching Implant features integrated platform switching,
which incorporates a coronal bevel design that medializes the
Implant Abutment Junction (IAJ). This feature is available on 3i T3®,
OSSEOTITE® and NanoTite™ Implants unless otherwise noted.
The surface extends to the top of the collar where the
medialization of the implant begins, creating a continuous
bone loading surface.

Centralized IAJ:
Moves microgap in from shoulder
and centralizes occlusal forces.
Full Surface Treatment:
Elevates the bone loading
surface for maximum BIC.

The Certain Platform Switching Implant offers the Certain
QuickSeat® Connection. This provides the clinician with an
audible and tactile click that confirms the abutment is properly
seated. The double hex allows for as many as 12 rotational
positions, which is ideal for angled abutments.

Abutment QuickSeat
Connection

‚

‚

‚

4.1mm
5mm

‚

.45mm ‚
‚

15°
Angle

˜

The Certain Platform Switching Implant’s prosthetic table is
appropriately color-coded to ensure proper matching of the
corresponding BIOMET 3i Abutments.
The Certain Platform Switching Implant is offered in two
different implant configurations:

Tapered

Tapered Certain Platform Switching
Implant
Incorporates all of the design features of a platform switching
implant with a tapered design, which approximates the shape of
a natural tooth root. The innovative thread angle, depth and
pitch produce an anchoring “bite in bone” response for
establishing primary stability.

Parallel Walled

Parallel Walled Certain Platform
Switching Implant
The straight collar design incorporates platform switching using a
parallel walled implant.

v

Introduction
Surface Technologies
The 3i T3® Implant Family
Fine micron features
on the implant collar
(1 - 3 microns) via dual
acid-etching (DAE)

The 3i T3 Implant represents the most recent advanced dental implant
surface technology since the introduction of the NanoTite™Implant in
2007. This latest surface technology is designed to deliver aesthetic
results through tissue preservation.
A contemporary hybrid surface is provided by complex multi-surface
topography. In preclinical studies*, the 3i T3 with DCD® Surface
demonstrated increased integration strength throughout the healing
phase as compared to less complex surface topographies.1

Coarse micron feature:
(10+ microns) via resorbable
calcium phosphate media blast
Fine micron feature:
(1 - 3 microns) via dual
acid-etching (DAE) on top
of the blasted surface
Option for nano-scale features along the full
length of the implant.

Osseointegration is achieved with initial bone-to-implant contact, a
major contributor to the implant’s stability.2 The specifications of the
3i T3 Implant and surgical instrumentation are held to rigorous
tolerances to provide a closely integrated implant-to-osteotomy fit,
creating a dental implant system designed for primary stability.
The seal integrity is provided by a stable, tight implant/abutment
interface that can minimize abutment micromotion and reduce the
potential for microleakage.3 The seal strength is designed to reduce
microleakage through exacting interface tolerances and maximized
clamping forces.
The
Gold-Tite® Screw increases implant/abutment
clamping force by 113% as compared to a non-coated screw with the
Certain® Implant.4 The patented Gold-Tite Surface lubrication allows the
screw to rotate further, increasing clamping force and maximizing
abutment stability.5 Implants with integrated platform switching medialize
the implant/abutment junction (IAJ) inward, creating a biologic width
between connective tissue and the IAJ, helping to maintain bone levels.6

1. Davies JE†, Ajami E, Moineddin R, et al. The role of different scale ranges of surface implant topography on the stability of the bone/implant interface.
Biomaterials 2013;34(14):3535-3546. Epub 2013 Feb 14.
2. Meredith N. Assessment of implant stability as a prognostic determinant. Int J Prosthodont. 1998 Sep-Oct;11(5):491-501.
3. Gubbi P†, Suttin Z†, Towse R†. Microgap analysis at the implant-abutment interface of various dental implant systems. Poster Presentation (P-98): Academy of
Osseointegration 28th Annual Meeting, March 2013, Tampa, Florida, USA.
4. Suttin Z††, Towse R††. Effect of abutment screw design on implant system seal performance. Presented at the European Association for Osseointegration, 20th
Annual Scientific Meeting; October 2012; Copenhagen, Denmark. http://biomet3i.com/Pdf/Posters/P-450_Effect_of_Screw_Design_on_Implant_Seal.pdf
5. Byrne D, Jacobs S, O’Connell B, Houston F, Claffey N. Preloads generated with repeated tightening in three types of screws used in dental implant assemblies.
J. Prosthodont. 2006 May–Jun;15(3):164-171.
6. Lazzara R†, Porter SS. Platform switching: A new concept in implant dentistry for controlling post-restorative crestal bone levels. Int J Perio Rest Dent.
2006;26:9-17.
† JE Davies and R. Lazzara have financial relationships with BIOMET 3i LLC resulting from speaking engagements, consulting engagements and other retained
services.
†† Mr. Gubbi, Mr. Suttin and Mr. Towse contributed to the above research while employed by BIOMET 3i.
*Pre-clinical studies are not necessarily indicative of clinical results.

vi

Introduction
Surface Technologies
The NanoTite™Implant Family
The NanoTite Implant is the patented OSSEOTITE® dual-acid-etched surface,
which is then further treated with a deposition of nanometer scale crystals of
calcium phosphate. This is known as the Discrete Crystalline Deposition or
DCD® Process. The surface treatment is a discrete crystalline deposition on the
OSSEOTITE Surface, not a plasma sprayed coating.

NanoTite Surface at 20,000x
magnification

The synergistic effect of these two technologies, the OSSEOTITE Surface and the
DCD Process has demonstrated promising results in animal studies.* Because of
this synergistic effect, a more complex micro-surface is created. Preclinical
studies* demonstrated that the NanoTite Surface treatment, when compared to
OSSEOTITE Control Implants, significantly improved the rate and extent of
bone-to-implant contact, resulting in statistically significant enhanced integration.1,2
For all NanoTite Configurations, wherever there is the dual-acid-etched
OSSEOTITE Surface, the DCD nano-scale calcium phosphate has been applied.

1. Mendes VC, Davies JE†. Discrete calcium phosphate nanocrystals enhance osteoconduction on titanium-based implant surfaces. Canadian Biomaterials Society.
25th Annual Meeting. May 26-28, 2006. Calgary, Alberta, Canada.
2. Mendes VC, Davies JE†. Discrete calcium phosphate nanocrystals render titanium surfaces bone-bonding. Int J Oral Maxillofac Implant. 2007;22:484.
*Pre-clinical studies are not necessarily indicative of clinical results.

The OSSEOTITE® Implant Family
The OSSEOTITE Implant features the
patented dual-acid-etched
surface that is optimal for improving the clot/implant attachment, which may
increase platelet activation and red blood cell (rbc) agglomeration.1

OSSEOTITE Surface at 20,000x
magnification

For more than 15 years, with documentation from numerous global multicenter
clinical evaluations,2-9 the OSSEOTITE Surface has proven to be one of the most
predictable and well-researched surfaces ever. Clinical studies on the OSSEOTITE
Surface document the benefits of increased contact osteogenesis, especially in poor
quality bone.10

1. Park JY, Davies JE†. Red Blood Cell and Platelet Interactions with Titanium Implant Surfaces. Clinical Oral Implants Research. 2000:11:530-539.
2. Sullivan DY, Sherwood RL, Porter SS. Long-Term Performance of OSSEOTITE Implants: A 6-Year Clinical Follow-up. Compendium. April 2001; Vol. 22, No. 4.
3. Davarpanah M, Martinez H, Etienne D, Zabalegui I, Mattout P, Chiche F†, Michel J. A Prospective Multicenter Evaluation of 1,538 3i Implants: 1 to 5-year
Data. The International Journal of Oral & Maxillofacial Implants. 2002; Vol. 17, No. 6.
4. Feldman S, Boitel N, Weng D, Kohles SS, Stach RM†. Five-Year Survival Distributions of Short-Length (10mm or less) Machined-Surfaced and OSSEOTITE
Implants. Clinical Implant Dentistry and Related Research. 2004; Vol. 6, No. 1.
5. Sullivan D, Vincenzi G, Feldman S. Early Loading of OSSEOTITE Implants 2 Months After Placement in the Maxilla and Mandible: A 5-year Report. The
International Journal of Oral & Maxillofacial Implants. 2006; Vol. 20, No. 6.
6. Stach RM†, Kohles SS. A Meta-Analysis Examining the Clinical Survivability of Machined-Surfaced and OSSEOTITE Implants in Poor-Quality Bone. Implant
Dentistry. 2003; Vol. 12, No.1.
7. Testori T†, Wiseman L, Woolfe S, Porter SS. A Prospective Multicenter Clinical Study of the OSSEOTITE Implant: Four-Year Interim Report. The International
Journal of Oral & Maxillofacial Implants. 2001;16:193-200.
8. Gaucher H, Bentley K, Roy S, Head T, Blomfield J, Blondeau F, Nicholson L, Chehade A, Tardif N, Emery R†. A Multi-Centre Study of OSSEOTITE Implants
Supporting Mandibular Restorations: A 3-Year Report. Journal of the Canadian Dental Association. October 2001; Vol. 67, No. 9.
9. Testori T†, Fabbro MD, Feldman S, Vincenzi G, Sullivan D, Rossi R, Anitua E, Bianchi F, Francetti L, Weinstein RL. A Multicenter Prospective Evaluation of 2months Loaded OSSEOTITE Implants Placed in the Posterior Jaws: 3-year Follow-up Results. Clinical Oral Implants Research. 2002;13:154-161.
10. Stach RM††, Kohles SS. A Meta-Analysis Examining the Clinical Survivability of Machined-Surfaced and OSSEOTITE Implants In Poor Quality Bone. Implant
Dent 2003;12:87-96.
† F Chiche, JE Davies, R Emory and T Testori have financial relationships with BIOMET 3i LLC resulting from speaking engagements, consulting engagements and
other retained services.
†† RM Stach contributed to the above research while employed by BIOMET 3i.

vii

Top-Down Treatment Planning
In its simplest form, top-down treatment planning
refers to a guideline whereby the desired restorative
result is considered first, leading to consideration of the
appropriate prosthetic platform and subsequent implant
selection based on bony anatomy and the size of the
missing tooth.

Implant and healing abutment selections are based upon
the relationship of several key measurements:
• The emerging dimension of the crown in relation to
the diameter of the prosthetic platform of the implant
• The height and diameter of the intended restoration
at the tissue exit point

A top-down treatment planning methodology will provide
maximum biomechanical stability and allow for soft-tissue
flaring by utilizing an implant with a prosthetic platform
slightly smaller in diameter than the emergence diameter
of the tooth being replaced. The wide selection of
Implants allows clinicians to match the size
of the prosthetic platform to the restoration it will
eventually support, while allowing for different bone
volumes and anatomical features at the implant site.

• The bone volume at the implant site in relation to the
diameter of the implant body
The Emergence Profile (EP®) Healing Abutment System
consists of healing abutments of various diameters and
heights for shaping the soft tissue to replicate the
geometry and gingival contours of natural dentition.

Implant Indications: Include both straight and pre-angled restorative components.
3.25mm(D) 3.75mm(D)

Anterior
Posterior

4

4

4mm(D)

5mm(D)

6mm(D)

4mm(D) X
3.4mm(P)

5mm(D) X
4.1mm(P)

6mm(D) X
5mm(P)

4
4

4
4

4
4

4
4

4
4

4
4

NOTE: It is recommended that implants less than 4mm diameter not be placed in the posterior regions.

viii

Top-Down Treatment Planning
6mm

6mm

4mm

4mm

5mm

8

8

5

5

5.5

3.25mm

5

5mm

7.5

Crown
Diameter

Implant
Diameter

Tapered
Implants

9

8

5

6mm

6mm

5

4mm

4

5.5

4mm

5mm

3.5

3.25mm 3.25mm

6mm

6mm

4mm

3.75mm

5mm

3.25mm

5mm

8

8

5

5

5.5

5

7.5

Crown
Diameter

Implant
Diameter

Parallel Walled
Implants

8

6mm

9

5

5

5.5

6mm

4mm

5mm

4mm

ix

4

3.5

3.25mm 3.25mm

Certain® Internal Connection Implants
Tapered

New!

3i T3 With DCD Non-Platform Switched

3i T3® With DCD® Platform Switched
Commercially Pure Titanium

Commercially Pure Titanium
4.1

3.4

Contemporary
Hybrid
Surface

5

4.1
1.25

5

1.25

4.1

3.4

6
1.25

1.25

6

5
1.25

1.25

1.25

2.4

3.2

3.9

1.9

Length

4mm(D) X
3.4mm(P)

5mm(D) X
4mm(P)

6mm(D) X
5mm(P)

3.25mm(D)

4mm(D)

5mm(D)

6mm(D)

8.5mm

BNPT4385

BNPT5485

BNPT6585

BNST3285

BNST485

BNST585

BNST685

2.4

3.2

3.9

10mm

BNPT4310

BNPT5410

BNPT6510

BNST3210

BNST410

BNST510

BNST610

11.5mm

BNPT4311

BNPT5411

BNPT6511

BNST3211

BNST411

BNST511

BNST611

13mm

BNPT4313

BNPT5413

BNPT6513

BNST3213

BNST413

BNST513

BNST613

15mm

BNPT4315

BNPT5415

BNPT6515

BNST3215

BNST415

BNST515

BNST615

3i T3 Platform Switched

3i T3 Non-Platform Switched

Commercially Pure Titanium

Commercially Pure Titanium

Length

8.5mm

BOPT4385

BOPT5485

BOPT6585

BOST3285

BOST485

BOST585

BOST685

10mm

BOPT4310

BOPT5410

BOPT6510

BOST3210

BOST410

BOST510

BOST610

11.5mm

BOPT4311

BOPT5411

BOPT6511

BOST3211

BOST411

BOST511

BOST611

13mm

BOPT4313

BOPT5413

BOPT6513

BOST3213

BOST413

BOST513

BOST613

15mm

BOPT4315

BOPT5415

BOPT6515

BOST3215

BOST415

BOST515

BOST615

Cover Screw Flat
(included)

Cover Screw 1mm(H)

IMCSF34

ICSF41

ICSF50

IMCSF34

ICSF41

ICSF50

ICSF60

IMMCS1

ICS375*

ICS500

IMMCS1

ICS375*

ICS500

ICS600

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

1

Certain® Internal Connection Implants
Parallel Walled

New!

3i T3 With DCD Non-Platform Switched

3i T3® With DCD® Platform Switched
Commercially Pure Titanium

Commercially Pure Titanium
4.1

3.4

Contemporary
Hybrid
Surface

5

4.1
.5

5

.5

3.4

6
1.15

.5

6

5

4.1
1

1.25

1.25

2.8

3.1

4.1

2.5

Length

4mm(D) X
3.4mm(P)

5mm(D) X
4mm(P)

6mm(D) X
5mm(P)

3.25mm(D)

4mm(D)

5mm(D)

6mm(D)

8.5mm

BNPS4385

BNPS5485

BNPS6585

BNSS385

BNSS485

BNSS585

BNSS685

2.8

3.1

4.1

10mm

BNPS4310

BNPS5410

BNPS6510

BNSS310

BNSS410

BNSS510

BNSS610

11.5mm

BNPS4311

BNPS5411

BNPS6511

BNSS311

BNSS411

BNSS511

BNSS611

13mm

BNPS4313

BNPS5413

BNPS6513

BNSS313

BNSS413

BNSS513

BNSS613

15mm

BNPS4315

BNPS5415

BNPS6515

BNSS315

BNSS415

BNSS515

BNSS615

18mm

—

—

—

BNSS318

BNSS418

—

—

3i T3 Platform Switched

3i T3 Non-Platform Switched

Commercially Pure Titanium

Commercially Pure Titanium

Length

8.5mm

BOPS4385

BOPS5485

BOPS6585

BOSS385

BOSS485

BOSS585

BOSS685

10mm

BOPS4310

BOPS5410

BOPS6510

BOSS310

BOSS410

BOSS510

BOSS610

11.5mm

BOPS4311

BOPS5411

BOPS6511

BOSS311

BOSS411

BOSS511

BOSS611

13mm

BOPS4313

BOPS5413

BOPS6513

BOSS313

BOSS413

BOSS513

BOSS613

15mm

BOPS4315

BOPS5415

BOPS6515

BOSS315

BOSS415

BOSS515

BOSS615

18mm

—

—

—

BOSS318

BOSS418

—

—

Cover Screw Flat
(included)

Cover Screw 1mm(H)

IMCSF34

ICSF41

ICSF50

IMCSF34

ICSF41

ICSF50

ICSF60

IMMCS1

ICS375*

ICS500

IMMCS1

ICS375*

ICS500

ICS600

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

2

Certain® Internal Connection Implants
Tapered
NanoTite™ Tapered Certain PREVAIL®
Titanium Alloy
4.1

3.4

Full
NanoTite
Surface

5

4.1
1.25

5

1.25

6
1.25

2.4

3.9

3.2

Length

4/3mm(P)

5/4mm(P)

6/5mm(P)

8.5mm

NIITP4385

NIITP5485

NIITP6585

10mm

NIITP4310

NIITP5410

NIITP6510

11.5mm

NIITP4311

NIITP5411

NIITP6511

13mm

NIITP4313

NIITP5413

NIITP6513

15mm

NIITP4315

NIITP5415

NIITP6515

Cover Screw Flat
(included)

Cover Screw 1mm(H)

IMCSF34

ICSF41

ICSF50

IMMCS1

ICS375*

ICS500

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

NanoTite Tapered Certain
Titanium Alloy
3.4
1.25

Modified
Hybrid
NanoTite
Surface

4.1
1.25

1.9

2.4

6

5
1.25

1.25

3.2

3.9

Length

3.25mm(D)

4mm(D)

5mm(D)

6mm(D)

8.5mm

NINT3285

NINT485

NINT585

NINT685

10mm

NINT3210

NINT410

NINT510

NINT610

11.5mm

NINT3211

NINT411

NINT511

NINT611

13mm

NINT3213

NINT413

NINT513

NINT613

15mm

NINT3215

NINT415

NINT515

NINT615

Cover Screw Flat
(included)

Cover Screw 1mm(H)

IMCSF34

ICSF41

ICSF50

ICSF60

IMMCS1

ICS375*

ICS500

ICS600

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

3

Certain® Internal Connection Implants
Tapered
OSSEOTITE® Tapered Certain PREVAIL®
Commercially Pure Titanium
4.1

3.4

Full
OSSEOTITE
Surface

5

4.1
1.25

5

1.25

6
1.25

2.4

3.9

3.2

Length

4/3mm(P)

5/4mm(P)

6/5mm(P)

8.5mm

XIITP4385

XIITP5485

XIITP6585

10mm

XIITP4310

XIITP5410

XIITP6510

11.5mm

XIITP4311

XIITP5411

XIITP6511

13mm

XIITP4313

XIITP5413

XIITP6513

15mm

XIITP4315

XIITP5415

XIITP6515

Cover Screw Flat
(included)

Cover Screw 1mm(H)

IMCSF34

ICSF41

ICSF50

IMMCS1

ICS375*

ICS500

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

Full OSSEOTITE Tapered Certain
Commercially Pure Titanium
4.1

3.4
1.25

1.25

6

5
1.25

1.25

Full
OSSEOTITE
Surface
1.9

2.4

3.2

3.9

Length

3.25mm(D)

4mm(D)

5mm(D)

6mm(D)

8.5mm

XIFNT3285

XIFNT485

XIFNT585

XIFNT685

10mm

XIFNT3210

XIFNT410

XIFNT510

XIFNT610

11.5mm

XIFNT3211

XIFNT411

XIFNT511

XIFNT611

13mm

XIFNT3213

XIFNT413

XIFNT513

XIFNT613

15mm

XIFNT3215

XIFNT415

XIFNT515

XIFNT615

IMCSF34

ICSF41

ICSF50

ICSF60

IMMCS1

ICS375*

ICS500

ICS600

Cover Screw Flat
(included)

Cover Screw 1mm(H)

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

4

Certain® Internal Connection Implants
Parallel Walled
NanoTite™ Certain PREVAIL®
Titanium Alloy
4.1

3.4

Full
NanoTite
Surface

4.1

5
.5

.5

3.1

2.6

Length

5/4mm(P)

4/3mm(P)

8.5mm

NIIOS4385

NIIOS5485

10mm

NIIOS4310

NIIOS5410

11.5mm

NIIOS4311

NIIOS5411

13mm

NIIOS4313

NIIOS5413

15mm

NIIOS4315

NIIOS5415

IMCSF34

ICSF41

IMMCS1

ICS375*

Cover Screw Flat
(included)

Cover Screw 1mm(H)

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

Certain PREVAIL
Commercially Pure Titanium
4.1

3.4

Full
OSSEOTITE
Surface

5

4.1
.5

.5

2.8

5

6
.5

3.1

4.1

Length

4/3mm(P)

5/4mm(P)

6/5mm(P)

8.5mm

XIIOS4385

XIIOS5485

XIIOS6585

10mm

XIIOS4310

XIIOS5410

XIIOS6510

11.5mm

XIIOS4311

XIIOS5411

XIIOS6511

13mm

XIIOS4313

XIIOS5413

XIIOS6513

15mm

XIIOS4315

XIIOS5415

XIIOS6515

Cover Screw Flat
(included)

Cover Screw 1mm(H)

IMCSF34

ICSF41

ICSF50

IMMCS1

ICS375*

ICS500

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

5

Certain® Internal Connection Implants
Parallel Walled
NanoTite™Parallel Walled Certain
Titanium Alloy
4.1

3.4
1.15

Modified
Hybrid
NanoTite
Surface

1

2.4

6

5
1.25

2.6

1.25

4.1

3.1

Length

3.25mm(D)

4mm(D)

5mm(D)

6mm(D)

8.5mm

NIOSM385

NIOSS485

NIOSS585

NIOSS685

10mm

NIOSM310

NIOSS410

NIOSS510

NIOSS610

11.5mm

NIOSM311

NIOSS411

NIOSS511

NIOSS611

13mm

NIOSM313

NIOSS413

NIOSS513

NIOSS613

15mm

NIOSM315

NIOSS415

NIOSS515

NIOSS615

18mm

NIOSM318

NIOSS418

N/A

N/A

Cover Screw Flat
(included)

Cover Screw 1mm(H)

IMCSF34

ICSF41

ICSF50

ICSF60

IMMCS1

ICS375*

ICS500

ICS600

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

Parallel Walled Certain
Commercially Pure Titanium
4.1

3.4
1.15

Full
OSSEOTITE
Surface

1

2.5

2.8

6

5
1.25

1.25

3.1

4.1

Length

3.25mm(D)

4mm(D)

5mm(D)

6mm(D)

8.5mm

XIFOSM385

XIFOSS485

XIFOSS585

XIFOSS685

10mm

XIFOSM310

XIFOSS410

XIFOSS510

XIFOSS610

11.5mm

XIFOSM311

XIFOSS411

XIFOSS511

XIFOSS611

13mm

XIFOSM313

XIFOSS413

XIFOSS513

XIFOSS613

15mm

XIFOSM315

XIFOSS415

XIFOSS515

XIFOSS615

Cover Screw Flat
(included)

Cover Screw 1mm(H)

IMCSF34

ICSF41

ICSF50

ICSF60

IMMCS1

ICS375*

ICS500

ICS600

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

6

External Hex Connection Implants
Tapered & Parallel Walled

New!
3i T3® Tapered With DCD®

3i T3 Parallel Walled With DCD

Commercially Pure Titanium

Commercially Pure Titanium
3.4
2.5

.7

1.25

Contemporary
Hybrid
Surface

5

6

2.7

2.7

2.7

.7

1.25

3.25mm(D)

.7

1.25

4.1

3.4
2.5

.7

1.25

1.15

.7

2.7
.75 .7

6

5

4.1

2.7

.7

2.7
.75

.7

2.7
.5

.7

.5

2.4

3.2

3.9

2.5

2.8

2.8

3.1

4.1

4mm(D)

5mm(D)

6mm(D)

3.25mm(D)

3.75mm(D)

4mm(D)

5mm(D)

6mm(D)

1.9

Length

4.1

6.5mm

—

—

—

—

BNES365

BNES3765

BNES465

BNES565

BNES665

8.5mm

BNET3285

BNET485

BNET585

BNET685

BNES385

BNES3785

BNES485

BNES585

BNES685

10mm

BNET3210

BNET410

BNET510

BNET610

BNES310

BNES3710

BNES410

BNES510

BNES610

11.5mm

BNET3211

BNET411

BNET511

BNET611

BNES311

BNES3711

BNES411

BNES511

BNES611

13mm

BNET3213

BNET413

BNET513

BNET613

BNES313

BNES3713

BNES413

BNES513

BNES613

15mm

BNET3215

BNET415

BNET515

BNET615

BNES315

BNES3715

BNES415

BNES515

BNES615

18mm

—

—

—

—

BNES318

BNES3718

BNES418

BNES518

BNES618

3i T3 Tapered

3i T3 Parallel Walled

Commercially Pure Titanium

Commercially Pure Titanium

6.5mm

—

—

—

—

BOES365

BOES3765

BOES465

BOES565

BOES665

8.5mm

BOET3285

BOET485

BOET585

BOET685

BOES385

BOES3785

BOES485

BOES585

BOES685

10mm

BOET3210

BOET410

BOET510

BOET610

BOES310

BOES3710

BOES410

BOES510

BOES610

11.5mm

BOET3211

BOET411

BOET511

BOET611

BOES311

BOES3711

BOES411

BOES511

BOES611

13mm

BOET3213

BOET413

BOET513

BOET613

BOES313

BOES3713

BOES413

BOES513

BOES613

15mm

BOET3215

BOET415

BOET515

BOET615

BOES315

BOES3715

BOES415

BOES515

BOES615

18mm

—

—

—

—

BOES318

BOES3718

BOES418

BOES518

BOES618

MMCS1

CS375

CS500

CS600

MMCS1

CS375

CS375

CS500

CS600

CS275

CS275

CS275

CS275

CS275

CS275

CS275

CS275

CS275

Cover Screw 1mm(H)
(included)

Cover Screw Headless

NanoTite™Tapered
Titanium Alloy

Modified
Hybrid
NanoTite
Surface

2.7
1.25

6

5

4.1

3.4
2.5
.7

2.7

2.7

.7

.7

.7

1.25

1.25

1.25

1.9

2.4

3.2

Length

3.25mm(D)

4mm(D)

5mm(D)

6mm(D)

8.5mm

NNT3285

NNT485

NNT585

NNT685

3.9

10mm

NNT3210

NNT410

NNT510

NNT610

11.5mm

NNT3211

NNT411

NNT511

NNT611

13mm

NNT3213

NNT413

NNT513

NNT613

15mm

NNT3215

NNT415

NNT515

NNT615

Cover Screw 1mm(H)
(included)

Cover Screw Headless

All indicated measurements are in millimeters.

MMCS1

CS375

CS500

CS600

CS275

CS275

CS275

CS275

7

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

External Hex Connection Implants
Tapered
Full OSSEOTITE® Tapered
Commercially Pure Titanium
3.4
2.5
.7

1.25

Full
OSSEOTITE
Surface

4.1

5

6

2.7

2.7

2.7

.7

.7

.7

1.25

3.2

2.4

1.9

1.25

1.25

3.9

Length

3.25mm(D)

4mm(D)

5mm(D)

6mm(D)

8.5mm

FNT3285

FNT485

FNT585

FNT685

10mm

FNT3210

FNT410

FNT510

FNT610

11.5mm

FNT3211

FNT411

FNT511

FNT611

13mm

FNT3213

FNT413

FNT513

FNT613

15mm

FNT3215

FNT415

FNT515

FNT615

MMCS1

CS375

CS500

CS600

CS275

CS275

CS275

CS275

Cover Screw 1mm(H)
(included)

Cover Screw Headless

OSSEOTITE Tapered
Commercially Pure Titanium
2.7
1.25

6

5

4.1

3.4
2.5
.7

2.7

.7

2.7

.7

.7

1.25

1.25

1.25

Modified
Hybrid
OSSEOTITE
Surface
1.9

2.4

3.2

Length

3.25mm(D)

4mm(D)

5mm(D)

6mm(D)

8.5mm

NT3285

NT485

NT585

NT685

3.9

10mm

NT3210

NT410

NT510

NT610

11.5mm

NT3211

NT411

NT511

NT611

13mm

NT3213

NT413

NT513

NT613

15mm

NT3215

NT415

NT515

NT615

MMCS1

CS375

CS500

CS600

CS275

CS275

CS275

CS275

Cover Screw 1mm(H)
(included)

Cover Screw Headless

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

8

D)

External Hex Connection Implants
Parallel Walled
NanoTite™Parallel Walled
Titanium Alloy
3.4
2.5
.7

1.15

Modified
Hybrid
NanoTite
Surface

5

6

2.7

2.7

2.7

.7

.75

2.4

Length

4.1
.7

.5

.7

4.1

3.1

2.6

.5

3.25mm(D)
2.4

4mm(D)

5mm(D)

6mm(D)

N/A

NOSS407

NOSS507

NOSS607

7mm
8.5mm

NOSM385

NOSS485

NOSS585

NOSS685

10mm

NOSM310

NOSS410

NOSS510

NOSS610

11.5mm

NOSM311

NOSS411

NOSS511

NOSS611

13mm

NOSM313

NOSS413

NOSS513

NOSS613

15mm

NOSM315

NOSS415

NOSS515

NOSS615

18mm

NOSM318

NOSS418

NOSS518

NOSS618

MMCS1

CS375

CS500

CS600

CS275

CS275

CS275

CS275

Cover Screw 1mm(H)
(included)

Cover Screw Headless

Parallel Walled
Commercially Pure Titanium
4.1

3.4
2.5
.7

1.15

Full
OSSEOTITE
Surface

2.7
.75

2.5

2.8

.7

2.7
.75

2.8

6

5

4.1

2.7
.7

.7

2.7
.5

3.1

.7

.5

4.1

Length

3.25mm(D)

3.75mm(D)

4mm(D)

5mm(D)

6mm(D)

6.5mm

XFOSM365

XFOS365

XFOS465

XFOS565

XFOS665

8.5mm

XFOSM385

XFOS385

XFOS485

XFOS585

XFOS685

10mm

XFOSM310

XFOS310

XFOS410

XFOS510

XFOS610

11.5mm

XFOSM311

XFOS311

XFOS411

XFOS511

XFOS611

13mm

XFOSM313

XFOS313

XFOS413

XFOS513

XFOS613

15mm

XFOSM315

XFOS315

XFOS415

XFOS515

XFOS615

Cover Screw 1mm(H)
(included)

Cover Screw Headless

MMCS1

CS375

CS375

CS500

CS600

CS275

CS275

CS275

CS275

CS275

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

9

External Hex Connection Implants
Parallel Walled
Full OSSEOTITE® Parallel Walled
Commercially Pure Titanium
3.4
2.5
.7

1.15

Full
OSSEOTITE
Surface

4.1

5

6

2.7

2.7

2.7

2.7

.7

.75

2.4

Length

4.1
.7

.75

2.3

3.25mm(D)

3.75mm(D)

.7

.5

.7

.5

2.6

3.1

4.1

4mm(D)

5mm(D)

6mm(D)

7mm

FOSM307

FOS307

FOS407

FOS507

FOS607

8.5mm

FOSM385

FOS385

FOS485

FOS585

FOS685

10mm

FOSM310

FOS310

FOS410

FOS510

FOS610

11.5mm

FOSM311

FOS311

FOS411

FOS511

FOS611

13mm

FOSM313

FOS313

FOS413

FOS513

FOS613

15mm

FOSM315

FOS315

FOS415

FOS515

FOS615

MMCS1

CS375

CS375

CS500

CS600

CS275

CS275

CS275

CS275

CS275

Cover Screw 1mm(H)
(included)

Cover Screw Headless

OSSEOTITE Parallel Walled
Commercially Pure Titanium
3.4
2.5
.7

4.1

4.1

5

6

2.7

2.7

2.7

2.7

.7

.75

1.15

Hybrid
OSSEOTITE
Surface

Length

7mm

.7

.75

2.4

2.3

2.6

3.25mm(D)

3.75mm(D)

4mm(D)

.7

.5

3.1

5mm(D)

.7

.5

4.1

6mm(D)

N/A

N/A

N/A

OSS507

OSS607

8.5mm

OSM385

OSS385

OSS485

OSS585

OSS685

10mm

OSM310

OSS310

OSS410

OSS510

OSS610

11.5mm

OSM311

OSS311

OSS411

OSS511

OSS611

13mm

OSM313

OSS313

OSS413

OSS513

OSS613

15mm

OSM315

OSS315

OSS415

OSS515

OSS615

18mm

OSM318

OSS318

OSS418

OSS518

0SS618

20mm

N/A

OSS320

OSS420

N/A

N/A

Cover Screw 1mm(H)
(included)

Cover Screw Headless

MMCS1

CS375

CS375

CS500

CS600

CS275

CS275

CS275

CS275

CS275

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

10

Healing Abutments
Certain® Internal Connection

®

The BellaTek® Encode® Impression System
eliminates the need for an implant-level
impression while delivering a patient specific
restoration with appropriate margin height
and natural emergence contours for the
patient. This accuracy is achieved from an
impression of the BellaTek Encode
Healing Abutment.
Codes embedded on the occlusal surface of
the BellaTek Encode Healing Abutment
communicate the collar height, implant hex
orientation, platform diameter and interface
(the Certain Internal Connection or External
Hex Connection) of the implant.

11

Because the tissue is healed at the time of
impression, the margin should have the
appropriate placement and contour. The result
is a patient specific, anatomically designed,
final BellaTek Encode Abutment. Available in
titanium or with titanium nitride coating.

Optimization Is Key To Bellatek
Digital Dentistry Solutions
• Hard- And Soft-Tissue Maintenance
• Customized Treatment Solutions
• Practice Growth

Healing Abutments
Certain® Internal Connection
®

Occlusal markings provide scanner
information for abutment design.

Encode® Two-Piece
3.4mm(D) Seating Surface
Emergence Profile

3.8mm

Collar Height

Item Numbers

3mm

IEHA343

3.8mm

4mm

IEHA344

3.8mm

6mm

IEHA346

3.8mm

8mm

IEHA348

5mm

3mm

IEHA353

5mm

4mm

IEHA354

5mm

6mm

IEHA356

5mm

8mm

IEHA358

h
55°

4.1mm(D) Seating Surface
Emergence Profile

5

Collar Height

Item Numbers

4.1mm

3mm

IEHA443

4.1mm

4mm

IEHA444

4.1mm

6mm

IEHA446

4.1mm

8mm

IEHA448

5mm

3mm

IEHA453

5mm

4mm

IEHA454

5mm

6mm

IEHA456

5mm

8mm

IEHA458

3.4

5
h
68°

6mm

3mm

IEHA463

6mm

4mm

IEHA464

6mm

6mm

IEHA466

6mm

8mm

IEHA468

4.1

5mm(D) Seating Surface
Emergence Profile

Collar Height

Item Numbers

5.6mm

3mm

IEHA553

5.6mm

4mm

IEHA554

5.6mm

6mm

IEHA556

5.6mm

8mm

IEHA558

6mm

3mm

IEHA563

6mm

4mm

IEHA564

6mm

6mm

IEHA566

6mm

8mm

IEHA568

5.6
h
45°

5

6mm(D) Seating Surface
Emergence Profile

Collar Height

Item Numbers

6.8mm

3mm

IEHA663

6.8mm

4mm

IEHA664

6.8mm

6mm

IEHA666

6.8mm

8mm

IEHA668

6.8
h
35°

6

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

12

Healing Abutments
Certain® Internal Connection
EP (Emergence Profile)
Height
Restorative Platform

EP® One-Piece
3.4mm(D) Seating Surface
Emergence Profile

Collar Height

Item Numbers

3.4mm

2mm

ISMHA32

3.4mm

3mm

ISMHA33

3.4mm

4mm

ISMHA34

3.4mm

6mm

ISMHA36

3.8mm

2mm

IMHA32

3.8mm

3mm

IMHA33

3.8mm

4mm

IMHA34

3.4
h
90°

3.4

3.8mm

6mm

IMHA36

5mm

2mm

IMHA352

5mm

3mm

IMHA353

5mm

4mm

IMHA354

5mm

6mm

IMHA356

3.8
h
45°

3.4
5
h
63°

4.1mm(D) Seating Surface
Emergence Profile

Collar Height

Item Numbers
3.4

4.1mm

2mm

ISHA42

4.1mm

3mm

ISHA43

4.1mm

4mm

ISHA44

4.1mm

6mm

ISHA46

4.1mm

8mm

ISHA48

5mm

2mm

ITHA52

5mm

3mm

ITHA53

5mm

4mm

ITHA54

4.1
h
90°

4.1

5
h
65°

5mm

6mm

ITHA56

5mm

8mm

ITHA58

6mm

3mm

ITHA63

6mm

4mm

ITHA64

6mm

6mm

ITHA66

4.1

6
h
60°

6mm

8mm

ITHA68
4.1

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

13

Healing Abutments
Certain® Internal Connection
EP® One-Piece
5mm(D) Seating Surface
Emergence Profile

5mm

Collar Height

Item Numbers

2mm

ISWHA52

5mm

3mm

ISWHA53

5mm

4mm

ISWHA54

5mm

6mm

ISWHA56

5mm

8mm

ISWHA58

5.6mm

2mm

IWTH52

5.6mm

3mm

IWTH53

5.6mm

4mm

IWTH54

5.6mm

6mm

IWTH56

5.6mm

8mm

IWTH58

6mm

2mm

IWTH562

6mm

3mm

IWTH563

6mm

4mm

IWTH564

5
h
90°

5

5.6
h
45°

5

6
h

6mm

6mm

IWTH566

6mm

8mm

IWTH568

35°

5

6mm(D) Seating Surface
Emergence Profile

Collar Height

Item Numbers

6mm

2mm

ISWHA62

6mm

3mm

ISWHA63

6mm

4mm

ISWHA64

6mm

6mm

ISWHA66

6
h

6mm

8mm

ISWHA68

6.8mm

2mm

IWTH62

6.8mm

3mm

IWTH63

6.8mm

4mm

IWTH64

6.8mm

6mm

IWTH66

6.8mm

8mm

IWTH68

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

14

90°

6

6.8
h
35°

6

Healing Abutments
External Hex Connection
®

Occlusal markings provide scanner
information for abutment design.

Encode® Two-Piece
3.4mm(D) Seating Surface
Emergence Profile

3.8mm

Collar Height

Item Numbers

3mm

EHA343

3.8mm

4mm

EHA344

3.8mm

6mm

EHA346

3.8mm

8mm

EHA348

5mm

3mm

EHA353

5mm

4mm

EHA354

5mm

6mm

EHA356

5mm

8mm

EHA358

5
h
55°

4.1mm(D) Seating Surface
Emergence Profile

4.1mm

3.4

Collar Height

Item Numbers

3mm

EHA443

4.1mm

4mm

EHA444

4.1mm

6mm

EHA446

4.1mm

8mm

EHA448

5mm

3mm

EHA453

5mm

4mm

EHA454

5mm

6mm

EHA456

5mm

8mm

EHA458

5
h
68°

6mm

3mm

EHA463

6mm

4mm

EHA464

6mm

6mm

EHA466

6mm

8mm

EHA468

4.1

5mm(D) Seating Surface
Emergence Profile

Collar Height

Item Numbers

5.6mm

3mm

EHA553

5.6mm

4mm

EHA554

5.6mm

6mm

EHA556

5.6mm

8mm

EHA558

5.6
h
45°

6mm

3mm

EHA563

6mm

4mm

EHA564

6mm

6mm

EHA566

6mm

8mm

EHA568

5

6mm(D) Seating Surface
Emergence Profile

Collar Height

Item Numbers

6.8mm

3mm

EHA663

6.8mm

4mm

EHA664

6.8mm

6mm

EHA666

6.8mm

8mm

EHA668

6.8
h
35°
6

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

15

Healing Abutments
External Hex Connection
EP (Emergence Profile)
Height
Restorative Platform

EP® One-Piece
3.4mm(D) Seating Surface
Emergence Profile

Collar Height

Item Numbers

Temporary Healing Retention Cylinder

3.8mm

2mm

MHA32

3.8mm

3mm

MHA33

3.8mm

4mm

MHA34

Retains denture with soft tissue liner.
3.8
h
45°

3.8mm

6mm

MHA36

4.1mm(D) Seating Surface
Emergence Profile

Collar Height

3.4

THRC4

Item Numbers

4.1mm(D) x 4mm(H)

4.1mm

2mm

THA42

4.1mm

3mm

THA43

4.1mm

4mm

THA44

4.1mm

6mm

THA46

4.1mm

8mm

THA48

5mm

2mm

THA52

5mm

3mm

THA53

5mm

4mm

THA54

4.1
h
90°

4.1

5
h
65°

5mm

6mm

THA56

5mm

8mm

THA58

6mm

3mm

THA63

6mm

4mm

THA64

6mm

6mm

THA66

6mm

8mm

THA68

4.1

6
h
60°

4.1

5mm(D) Seating Surface
Emergence Profile

5.6mm

Collar Height

2mm

Item Numbers

WTH52

5.6mm

3mm

WTH53

5.6mm

4mm

WTH54

5.6
h
45°

5.6mm

6mm

WTH56

5.6mm

8mm

WTH58

6mm

2mm

WTH562

6mm

3mm

WTH563

6mm

4mm

WTH564

6mm

6mm

WTH566

6mm

8mm

WTH568

5

6
h
35°

5

6mm(D) Seating Surface
Emergence Profile

Collar Height

Item Numbers

6.8mm

2mm

WTH62

6.8mm

3mm

WTH63

6.8mm

4mm

WTH64

6.8mm

6mm

WTH66

6.8mm

8mm

WTH68

6.8
h
35°

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

16

6

THRC6
4.1mm(D) x 6mm(H)

Site Preparation Technologies
Product Overview
The Navigator® System For Guided
Surgery
The Navigator System helps clinicians transform computer-based
planning into practical implant placement with an opportunity for
immediate provisionalization.

Tapered Navigator Surgical Kit

The Navigator System enables placement and restoration of the
following
Tapered and Parallel Walled Implant Systems:
• Tapered/Parallel Walled Certain® 3.25, 4 and 5mm Implants
• Certain PREVAIL® 3/4/3, 4/3, 4/5/4 and 5/4 Implants
• Certain Tapered PREVAIL 4/3 and 5/4 Implants
Features specific to the Navigator System include:
• Depth-specific instrumentation for preparation and implant placement

Parallel Walled Navigator Surgical Kit

• Control of hex-orientation to fabricate and deliver provisional
restorations immediately following implant placement
• Open architecture compatibility that provides freedom to choose
among leading planning software solutions

DU1000 & OSSEOCISION® Surgical
Drilling Units
Both DU1000 and OSSEOCISION Surgical Drilling Units accept twist
drills, shaping drills and implant drivers. The units power these
instruments in order to create the osteotomy for implant placement.
DU1000 Surgical Drilling Unit

• Ergonomic handpiece design
• Customized programs for every stage of dental implant surgical
procedures
• Foot control for hands-free program and setting selections
DU1000 is manufactured by W&H Dentalwerk Bürmoos GmbH .
OSSEOCISION is manufactured by NSK Nakanishi Inc.

OSSEOCISION Surgical Drilling Unit

17

Site Preparation Technologies
Product Overview
Advanced Cutting Technology® (ACT ®)
Drills
• Two-flute design for efficient cutting
• Alternating lines and bands enhance depth mark visibility and drill
orientation in the osteotomy
• Matte finish to reduce glare

Tapered Implant Depth Indicators
& Quad Shaping Drills
• Tapered Implant Depth Indicators (NTDIs) verify the position of the
implant platform prior to placement
• Quad Shaping Drills (QSDs) use stepped depth marks for accuracy
in creating the osteotomy
• QSDs have end cutting ability
• Both QSDs and NTDIs are color-coded for platform recognition

Summers Osteotomes & Tapered
Osteotomes
• Summers Osteotomes for use with parallel walled implants
• Tapered Osteotomes available in straight and angled designs for use
with tapered implants
• Matte finished tip surface to reduce glare
• Ball striking end to facilitate use of a mallet

High Torque Indicating Ratchet Wrench
(H-TIRW)
• The H-TIRW doubles as a conventional ratchet wrench to place
implants and as a torque indicator to provided a visual assessment
of torque.
• Clearly indicates forward and reverse torque of 50-90Ncm without
the need for additional components.
• Does not require lubrication or periodic re-calibration. Calibration
may be checked by verifying that the arrow is positioned at the first
scale mark (0Ncm).
• Consisting of only two parts, the H-TIRW is easy to prepare for
sterilization.

18

Site Preparation Technologies

DU1000 Surgical Drilling Unit
Item Numbers

Description

DU1000 Surgical Drilling Unit
115 volt
230 volt

DU1000US
DU1000EU*

Accessories Included With The DU1000:

All accessories listed are compatible with both the DU900 and
DU1000 except for DU1KMC, DU1KHS, DU1KFC and DU1KH1.

Micromotor With Cable - 1.8m/5.9ft motor cable plugs into console and attaches to handpiece

DU1KMC

Motor/Handpiece Support - Drill unit attachment for resting handpiece

DU1KHS

Foot Control - Ergonomic design, variable speed and connects to console to provide foot activation

DU1KFC

Handle For Foot Control - Foot control attachment allowing for repositioning of foot control

DU1KH1

Irrigation Bag Stand - Stand for irrigation solution bag

DU9IBS

Circuit Fuse - Fuse for console, T1.25AH (250 volt)

DU9F

Motor Protective Cover - Component placed over the end of a DU1KMC before cleaning and
disinfection and for sterilization in sterilizers without a drying program

DU9SP

Locking Pin - Prevents handpiece on the motor attachment from turning during transmission

DU9LP

Disposable Irrigation Tubing Set (6-piece) - For the supply of irrigation fluid

DU1KIT

Spray Cap With Nozzle - Spray cap for service oil

DU9SC

Bur Testing Gauge - Verifies bur/drill shank diameter

DU9BG

Irrigation Tube Clamps (5-pack) - Clamps holding irrigation tubing to motor cable (DU9MC)

DU9CL

Electrical Power Cord (United States, Canada, Japan) - Connects to console and appropriate wall outlet

DU9PCUS

Electrical Power Cord (European Union) - Connects to console and appropriate wall outlet

DU9PCEU*

Electrical Power Cord (Switzerland) - Connects to console and appropriate wall outlet

DU1KPCCH*

Electrical Power Cord (Denmark) - Connects to console and appropriate wall outlet

DU1KPCDK*

Electrical Power Cord (United Kingdom, Ireland) - Connects to console and appropriate wall outlet

DU9PCUK*

Electrical Power Cord (Australia, New Zealand) - Connects to console and appropriate wall outlet

DU9PCAU*

The following items are not included with the DU1000 Surgical Drilling Unit, but can be ordered separately through
Customer Service.

20:1 Handpiece - WS-75 E/KM Gear reduction handpiece

DU9WS75

20:1 Handpiece - WI-75 LED G Gear reduction handpiece with built-in LED light

DU9WI75L

Nozzle Cleaner - Cleans coolant outlets of handpieces; included with handpiece

DU9NC

Y-Connector (3-pack) - Used to bifurcate irrigate flow from irrigation tube, DU1KIT, to provide both
internal and external irrigation; included with handpiece

DU9YC

*Not available in the United States.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

19

Site Preparation Technologies

OSSEOCISION® Surgical Drilling Unit
Item Numbers

Description

OSSEOCISION Surgical Drilling Unit
120 volt
100 volt
230 volt

DS100US
DS100J*
DS100RW*

Accessories Included With The OSSEOCISION Surgical Drilling Unit:
Tube Clamp - Holds irrigation tubing to motor cord

C202-750

Internal Irrigation Tube - “L” shaped tube that fits through the handpiece head and connects the
irrigation tubing and an internally irrigated component

C293-025

Y-Connector - Used to bifurcate irrigate flow from irrigation tube to provide both internal
and external irrigation

C823-752

Micromotor With Cord - Plugs into DS100 Console and attaches to handpiece

E211-001

Autoclave Plug For Motor - Used to keep moisture from entering micromotor during sterilization

E211-701

20:1 Handpiece - 20:1 Gear Reduction Handpiece for the drilling unit

SGQ-ER20H

Fuse (100V/120V) - Circuit fuse for DS100 Console (110–130 volt)

U195-152

Fuse (230V) - Circuit fuse for DS100 Console (230 volt)

U197-152*

Coolant Solution Hanger Post - Suspends irrigation bag or bottle from console

U370-152

Control Unit (100V) - DS100J Console

U370-003*

Control Unit (120V) - DS100US Console

U371-003

Control Unit (230V) - DS100RW Console

U372-003*

Electrical Power Cord (100V) - Plugs into DS100J Console and appropriate wall outlet

U389-013*

Electrical Power Cord (120V) - Plugs into DS100US Console and appropriate wall outlet

U371-550

Electrical Power Cord (230V Europe) - Plugs into DS100RW Console and appropriate wall outlet

U260-414*

Electrical Power Cord (230V Australia) - Plugs into DS100RW Console and appropriate wall outlet

U198-013*

Irrigation Tube Holder - Holds irrigation tubing to handpiece

Y900-083

Irrigation Tubing, Disposable/Clear (5-pack) - Connects between irrigation bag or bottle and
handpiece to provide irrigation flow

For re-ordering,
refer to Y900-114.

Motor Cradle - Supports handpiece when not in use

Z095-102

Handpiece Wench - Used to disassemble handpiece

Z103-101

Spray Lubricant Nozzle - Attaches to lubricant to lubricate handpiece

Z114-090

Nozzle Cleaning Fine Wire - Used to clean handpiece irrigation tube

Z144-095

Foot Control (3.5m) - Connects to DS100 Console to provide foot activation

Z272-004

The following items are not included in the OSSEOCISION Surgical Drilling Unit, but can be ordered separately through
Customer Service.

Motor Cord - Plugs into DS100 Console and attaches to handpiece

E211-051

Irrigation Tubing, Disposable/Clear (10-pack) - Connects between irrigation bag or bottle and
handpiece to provide irrigation flow
*Not available in the United States.

Y900-114

Refer to ART984 for the OSSEOCISION Warranty.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

20

Site Preparation Technologies
Tapered Navigator® System
For Guided Surgery

SGTIKIT Tapered Navigator Surgical Kit

For Tapered Implants Including:

• Tapered Certain® 3.25, 4 and 5mm Implants
• Tapered PREVAIL® 4/3 and 5/4 Implants

SGTIKIT
Surgical Kit

Description

Item Numbers

•

Tapered Navigator Surgical Tray

SGTTRAY

•

Tapered Navigator Tissue Punch, 4.1mm(D)

SGTTP4

•

Tapered Navigator Tissue Punch, 5mm(D)

SGTTP5

•

Tapered Navigator Cortical Perforator, 4.1mm(D) - Short

SGTCP4S

•

Tapered Navigator Cortical Perforator, 4.1mm(D) - Long

SGTCP4L

•

Tapered Navigator Cortical Perforator, 5mm(D) - Short

SGTCP5S

•

Tapered Navigator Cortical Perforator, 5mm(D) - Long

SGTCP5L

•

Tapered Navigator Twist Drill, 1.9mm(D) x A(L)

SGTD19A

•

Tapered Navigator Twist Drill, 1.9mm(D) x B(L)

SGTD19B

•

Tapered Navigator Twist Drill, 1.9mm(D) x C(L)

SGTD19C

•

Tapered Navigator Twist Drill, 1.9mm(D) x D(L)

SGTD19D

•

Tapered Navigator Twist Drill, 1.9mm(D) x E(L)

SGTD19E

•

Tapered Navigator Twist Drill, 1.9mm(D) x F(L)

SGTD19F

•

Tapered Navigator Twist Drill, 1.9mm(D) x G(L)

SGTD19G

•

Tapered Navigator Countersink Drill, 3.4mm(D) - Short

MSGTCDS

•

Tapered Navigator Countersink Drill, 4.1mm(D) - Short

SGTCD4S

•

Tapered Navigator Countersink Drill, 5mm(D) - Short

SGTCD5S

•

Tapered Navigator Countersink Drill, 3.4mm(D) - Long

MSGTCDL

•

Tapered Navigator Countersink Drill, 4.1mm(D) - Long

SGTCD4L

•

Tapered Navigator Countersink Drill, 5mm(D) - Long

SGTCD5L

•

Tapered Navigator Shaping Drill, 3.25mm(D) x 8.5mm(L) - Short

MSGTD85S

•

Tapered Navigator Shaping Drill, 3.25mm(D) x 10mm(L) - Short

MSGTD10S

•

Tapered Navigator Shaping Drill, 3.25mm(D) x 11.5mm(L) - Short

MSGTD11S

•

Tapered Navigator Shaping Drill, 3.25mm(D) x 13mm(L) - Short

MSGTD13S

•

Tapered Navigator Shaping Drill, 3.25mm(D) x 15mm(L) - Short

MSGTD15S

•

Tapered Navigator Shaping Drill, 4.1mm(D) x 8.5mm(L) - Short

SGTD485S

•

Tapered Navigator Shaping Drill, 4.1mm(D) x 10mm(L) - Short

SGTD410S

•

Tapered Navigator Shaping Drill, 4.1mm(D) x 11.5mm(L) - Short

SGTD411S

•

Tapered Navigator Shaping Drill, 4.1mm(D) x 13mm(L) - Short

SGTD413S

•

Tapered Navigator Shaping Drill, 4.1mm(D) x 15mm(L) - Short

SGTD415S

•

Tapered Navigator Shaping Drill, 5mm(D) x 8.5mm(L) - Short

SGTD585S

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

21

Site Preparation Technologies
Surgical Kit Cont’d

SGTIKIT
Surgical Kit

•

Item Numbers

Description

Tapered Navigator® Shaping Drill, 5mm(D) x 10mm(L) - Short

SGTD510S

•

Tapered Navigator Shaping Drill, 5mm(D) x 11.5mm(L) - Short

SGTD511S

•

Tapered Navigator Shaping Drill, 5mm(D) x 13mm(L) - Short

SGTD513S

•

Tapered Navigator Shaping Drill, 5mm(D) x 15mm(L) - Short

SGTD515S

•

Tapered Navigator Shaping Drill, 3.25mm(D) x 8.5mm(L) - Long

MSGTD85L

•

Tapered Navigator Shaping Drill, 3.25mm(D) x 10mm(L) - Long

MSGTD10L

•

Tapered Navigator Shaping Drill, 3.25mm(D) x 11.5mm(L) - Long

MSGTD11L

•

Tapered Navigator Shaping Drill, 3.25mm(D) x 13mm(L) - Long

MSGTD13L

•

Tapered Navigator Shaping Drill, 3.25mm(D) x 15mm(L) - Long

MSGTD15L

•

Tapered Navigator Shaping Drill, 4.1mm(D) x 8.5mm(L) - Long

SGTD485L

•

Tapered Navigator Shaping Drill, 4.1mm(D) x 10mm(L) - Long

SGTD410L

•

Tapered Navigator Shaping Drill, 4.1mm(D) x 11.5mm(L) - Long

SGTD411L

•

Tapered Navigator Shaping Drill, 4.1mm(D) x 13mm(L) - Long

SGTD413L

•

Tapered Navigator Shaping Drill, 4.1mm(D) x 15mm(L) - Long

SGTD415L

•

Tapered Navigator Shaping Drill, 5mm(D) x 8.5mm(L) - Long

SGTD585L

•

Tapered Navigator Shaping Drill, 5mm(D) x 10mm(L) - Long

SGTD510L

•

Tapered Navigator Shaping Drill, 5mm(D) x 11.5mm(L) - Long

SGTD511L

•

Tapered Navigator Shaping Drill, 5mm(D) x 13mm(L) - Long

SGTD513L

•

Tapered Navigator Shaping Drill, 5mm(D) x 15mm(L) - Long

SGTD515L

•

Tapered Navigator Twist Drill Positioning Handle

SGTDPHT

•

Tapered Navigator Reduction Drill Positioning Handle

SGTDPHR

•

Handpiece Connector

MDR10

•

Narrow Right Angle Large Hexed Driver Tip, 24mm(L)

RASH3N

•

Posterior Large Hexed Driver, 17mm(L)

PHD02N

•

Ratchet Extension, 6mm(L) - Short

RE100

•

Ratchet Extension, 15mm(L) - Long

RE200

•

Ratchet Wrench

WR150

•

Open End Wrench

CW100

•

Navigator Certain® Implant Mount, 3.4mm(D) - Short

MSGIIMS

•

Navigator Certain Implant Mount, 3.4mm(D) - Long

MSGIIML

•

Navigator Certain Implant Mount, 4.1mm(D) - Short

SGIIM4S

•

Navigator Certain Implant Mount, 4.1mm(D) - Long

SGIIM4L

•

Navigator Certain Implant Mount, 5mm(D) - Short

SGIIM5S

•

Navigator Certain Implant Mount, 5mm(D) - Long

SGIIM5L

•

Certain Manual Bone Profiler, 3.4mm(D) x 4.1mm(P)

IMMBP

•

Certain Manual Bone Profiler, 4.1mm(D) x 5mm(P)

IMBP4

•

Certain Manual Bone Profiler, 5mm(D) x 6mm(P)

IMBP5

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

22

Site Preparation Technologies
Tapered Navigator® System
For Guided Surgery

Tapered Navigator Tap Kit
(Included under SGTIKIT)

For Tapered Implants Including:
• Certain® 3.25, 4 and 5mm Implants
• Tapered PREVAIL® 4/3 and 5/4 Implants

SGTIKIT
Surgical Kit

Item Numbers

Description

•

Tapered Navigator Bone Tap Tray

•

Tapered Navigator Bone Tap, 3.25mm(D) x 8.5mm(L) - Short

SGTTAPT
MSGTT85S

•

Tapered Navigator Bone Tap, 3.25mm(D) x 10mm(L) - Short

MSGTT10S

•

Tapered Navigator Bone Tap, 3.25mm(D) x 11.5mm(L) - Short

MSGTT11S

•

Tapered Navigator Bone Tap, 3.25mm(D) x 13mm(L) - Short

MSGTT13S

•

Tapered Navigator Bone Tap, 3.25mm(D) x 15mm(L) - Short

MSGTT15S

•

Tapered Navigator Bone Tap, 4.1mm(D) x 8.5mm(L) - Short

SGTT485S

•

Tapered Navigator Bone Tap, 4.1mm(D) x 10mm(L) - Short

SGTT410S

•

Tapered Navigator Bone Tap, 4.1mm(D) x 11.5mm(L) - Short

SGTT411S

•

Tapered Navigator Bone Tap, 4.1mm(D) x 13mm(L) - Short

SGTT413S

•

Tapered Navigator Bone Tap, 4.1mm(D) x 15mm(L) - Short

SGTT415S

•

Tapered Navigator Bone Tap, 5mm(D) x 8.5mm(L) - Short

SGTT585S

•

Tapered Navigator Bone Tap, 5mm(D) x 10mm(L) - Short

SGTT510S

•

Tapered Navigator Bone Tap, 5mm(D) x 11.5mm(L) - Short

SGTT511S

•

Tapered Navigator Bone Tap, 5mm(D) x 13mm(L) - Short

SGTT513S

•

Tapered Navigator Bone Tap, 5mm(D) x 15mm(L) - Short

SGTT515S

•

Tapered Navigator Bone Tap, 3.25mm(D) x 8.5mm(L) - Long

MSGTT85L

•

Tapered Navigator Bone Tap, 3.25mm(D) x 10mm(L) - Long

MSGTT10L

•

Tapered Navigator Bone Tap, 3.25mm(D) x 11.5mm(L) - Long

MSGTT11L

•

Tapered Navigator Bone Tap, 3.25mm(D) x 13mm(L) - Long

MSGTT13L

•

Tapered Navigator Bone Tap, 3.25mm(D) x 15mm(L) - Long

MSGTT15L

•

Tapered Navigator Bone Tap, 4.1mm(D) x 8.5mm(L) - Long

SGTT485L

•

Tapered Navigator Bone Tap, 4.1mm(D) x 10mm(L) - Long

SGTT410L

•

Tapered Navigator Bone Tap, 4.1mm(D) x 11.5mm(L) - Long

SGTT411L

•

Tapered Navigator Bone Tap, 4.1mm(D) x 13mm(L) - Long

SGTT413L

•

Tapered Navigator Bone Tap, 4.1mm(D) x 15mm(L) - Long

SGTT415L

•

Tapered Navigator Bone Tap, 5mm(D) x 8.5mm(L) - Long

SGTT585L

•

Tapered Navigator Bone Tap, 5mm(D) x 10mm(L) - Long

SGTT510L

•

Tapered Navigator Bone Tap, 5mm(D) x 11.5mm(L) - Long

SGTT511L

•

Tapered Navigator Bone Tap, 5mm(D) x 13mm(L) - Long

SGTT513L

•

Tapered Navigator Bone Tap, 5mm(D) x 15mm(L) - Long

SGTT515L

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

23

Site Preparation Technologies
Tapered Navigator® System
For Guided Surgery

SGTILKIT Tapered Navigator Laboratory Kit

For Tapered Implants Including:
• Certain® 3.25, 4 and 5mm Implants
• Tapered PREVAIL® 4/3 and 5/4 Implants

SGTILKIT
Surgical Kit

Item Numbers

Description

•

Tapered Navigator Laboratory Tray

SGTLTRAY

•

Navigator Certain Analog Mount, 3.4mm(D) - Short

MSGIAMS

•

Navigator Certain Analog Mount, 4.1mm(D) - Short

SGIAM4S

•

Navigator Certain Analog Mount, 5mm(D) - Short

SGIAM5S

•

Navigator Certain Analog Mount, 3.4mm(D) - Long

MSGIAML

•

Navigator Certain Analog Mount, 4.1mm(D) - Long

SGIAM4L

•

Navigator Certain Analog Mount, 5mm(D) - Long

SGIAM5L

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

24

Site Preparation Technologies
Parallel Walled
Navigator® System
For Guided Surgery

SGKIT

Navigator Parallel Walled Surgical Kit

For Parallel Walled Implants Including:
•
•
•
•

Certain® 3.25, 4 and 5mm Implants
PREVAIL® 3/4/3 and 4/5/4 Implants
OSSEOTITE XP® 4/5 Implants
Straight PREVAIL 4/3 and 5/4 Implants

SGKIT
Surgical Kit

Item Numbers

Description

•

Navigator Surgical Tray

SGTRAY

•

Navigator Tissue Punch, 4.1mm(D)

SGTP4

•

Navigator Tissue Punch, 5mm(D)

SGTP5

•

Navigator Starter Drill, 3.4mm(D)

MSGSD

•

Navigator Starter Drill, 3/4mm(D)

SGSD34

•

Navigator Starter Drill, 4.1mm(D)

SGSD4

•

Navigator Starter Drill, 4/5mm(D)

SGSD45

•

Navigator Certain Starter Drill, 5mm(D)

SGISD5

•

Navigator Twist Drill, 2mm(D) x A(L)

SGD2A

•

Navigator Twist Drill, 2mm(D) x B(L)

SGD2B

•

Navigator Twist Drill, 2mm(D) x C(L)

SGD2C

•

Navigator Twist Drill, 2mm(D) x D(L)

SGD2D

•

Navigator Twist Drill, 2mm(D) x E(L)

SGD2E

•

Navigator Twist Drill, 2.75mm(D) x A(L)

SGD275A

•

Navigator Twist Drill, 2.75mm(D) x B(L)

SGD275B

•

Navigator Twist Drill, 2.75mm(D) x C(L)

SGD275C

•

Navigator Twist Drill, 2.75mm(D) x D(L)

SGD275D

•

Navigator Twist Drill, 2.75mm(D) x E(L)

SGD275E

•

Navigator Twist Drill, 3mm(D) x A(L)

SGD3A

•

Navigator Twist Drill, 3mm(D) x B(L)

SGD3B

•

Navigator Twist Drill, 3mm(D) x C(L)

SGD3C

•

Navigator Twist Drill, 3mm(D) x D(L)

SGD3D

•

Navigator Twist Drill, 3mm(D) x E(L)

SGD3E

•

Navigator Twist Drill, 3.25mm(D) x A(L)

SGD325A

•

Navigator Twist Drill, 3.25mm(D) x B(L)

SGD325B

•

Navigator Twist Drill, 3.25mm(D) x C(L)

SGD325C

•

Navigator Twist Drill, 3.25mm(D) x D(L)

SGD325D

•

Navigator Twist Drill, 3.25mm(D) x E(L)

SGD325E

•

Navigator Twist Drill, 3.85mm(D) x A(L)

SGD385A

•

Navigator Twist Drill, 3.85mm(D) x B(L)

SGD385B

•

Navigator Twist Drill, 3.85mm(D) x C(L)

SGD385C

•

Navigator Twist Drill, 4.25mm(D) x A(L)

SGD425A

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

25

Site Preparation Technologies
Surgical Kit Cont’d

SGKIT
Surgical Kit

Description

Item Numbers

®

•

Navigator Twist Drill, 4.25mm(D) x B(L)

SGD425B

•

Navigator Twist Drill, 4.25mm(D) x C(L)

SGD425C

•

Navigator Bone Tap, 3.25mm(D)

MSGTAP

•

Navigator Bone Tap, 4.1mm(D)

SGTAP4

•

Navigator Bone Tap, 4/5mm(D)

SGTAP45

•

Navigator Bone Tap, 5mm(D)

SGTAP5

•

Navigator Drill Positioning Handle 1

SGDPH1

•

Navigator Drill Positioning Handle 2

SGDPH2

•

Navigator Drill Positioning Handle 3

SGDPH3

•

Navigator Drill Positioning Handle 4

SGDPH4

•

Navigator Drill Positioning Handle 5

SGDPH5

•

Certain® Manual Bone Profiler, 3.4mm(D) x 4.1mm(P)

IMMBP

•

Certain Manual Bone Profiler, 4.1mm(D) x 5mm(P)

IMBP4

•

Certain Manual Bone Profiler, 5mm(D) x 6mm(P)

IMBP5

•

Narrow Right Angle Large Hexed Driver Tip, 24mm(L)

RASH3N

•

Open End Wrench

CW100

•

Ratchet Wrench

WR150

•

Handpiece Connector

MDR10

•

Posterior Large Hexed Driver, 17mm(L)

PHD02N

•

Ratchet Extension - Short, 6mm(L)

RE100

•

Ratchet Extension - Long, 15mm(L)

RE200

•

Navigator Certain Implant Mount, 3.4mm(D) x 1(L)

MSGIIM1

•

Navigator Certain Implant Mount, 3.4mm(D) x 2(L)

MSGIIM2

•

Navigator Certain Implant Mount, 3.4mm(D) x 3(L)

MSGIIM3

•

Navigator Certain Implant Mount, 3.4mm(D) x 4(L)

MSGIIM4

•

Navigator Certain Implant Mount, 4.1mm(D) x 1(L)

SGIIM41

•

Navigator Certain Implant Mount, 4.1mm(D) x 2(L)

SGIIM42

•

Navigator Certain Implant Mount, 4.1mm(D) x 3(L)

SGIIM43

•

Navigator Certain Implant Mount, 4.1mm(D) x 4(L)

SGIIM44

•

Navigator Certain Implant Mount, 5mm(D) x 1(L)

SGIIM51

•

Navigator Certain Implant Mount, 5mm(D) x 2(L)

SGIIM52

•

Navigator Certain Implant Mount, 5mm(D) x 3(L)

SGIIM53

•

Navigator Certain Implant Mount, 5mm(D) x 4(L)

SGIIM54

The following items are not included in the Navigator Surgical Kit, but can be ordered separately, as needed, through
Customer Service.
Description

Item Numbers

Description

Item Numbers

Navigator Twist Drill, 2mm(D) x Y(L)

SGD2Y

Navigator Twist Drill, 3.25mm(D) x Y(L)

SGD325Y

Navigator Twist Drill, 2mm(D) x Z(L)

SGD2Z

Navigator Twist Drill, 3.25mm(D) x Z(L)

SGD325Z

Navigator Twist Drill, 2.75mm(D) x Y(L)

SGD275Y

Navigator Twist Drill, 3.85mm(D) x Y(L)

SGD385Y

Navigator Twist Drill, 2.75mm(D) x Z(L)

SGD275Z

Navigator Twist Drill, 3.85mm(D) x Z(L)

SGD385Z

Navigator Twist Drill, 3mm(D) x Y(L)

SGD3Y

Navigator Twist Drill, 4.25mm(D) x Y(L)

SGD425Y

Navigator Twist Drill, 3mm(D) x Z(L)

SGD3Z

Navigator Twist Drill, 4.25mm(D) x Z(L)

SGD425Z

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

26

Site Preparation Technologies
Parallel Walled
Navigator® System
For Guided Surgery

SGLKIT

Navigator Parallel Walled Laboratory Kit

SGLKIT
Laboratory Kit

Item Numbers

Description

•

Navigator Laboratory Tray

SGLTRAY

•

Navigator Certain® Analog Mount, 3.4mm(D) x 1(L)

MSGIAM1

•

Navigator Certain Analog Mount, 3.4mm(D) x 2(L)

MSGIAM2

•

Navigator Certain Analog Mount, 3.4mm(D) x 3(L)

MSGIAM3

•

Navigator Certain Analog Mount, 3.4mm(D) x 4(L)

MSGIAM4

•

Navigator Certain Analog Mount, 4.1mm(D) x 1(L)

SGIAM41

•

Navigator Certain Analog Mount, 4.1mm(D) x 2(L)

SGIAM42

•

Navigator Certain Analog Mount, 4.1mm(D) x 3(L)

SGIAM43

•

Navigator Certain Analog Mount, 4.1mm(D) x 4(L)

SGIAM44

•

Navigator Certain Analog Mount, 5mm(D) x 1(L)

SGIAM51

•

Navigator Certain Analog Mount, 5mm(D) x 2(L)

SGIAM52

•

Navigator Certain Analog Mount, 5mm(D) x 3(L)

SGIAM53

•

Navigator Certain Analog Mount, 5mm(D) x 4(L)

SGIAM54

31-3100 BIOMET 2mm Fixation System
To order, call 1-800-874-7711
www.BiometMicrofixation.com

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

27

Site Preparation Technologies
Tapered Implant Surgical Kits
SLIMKT Slim Kit - Certain ®
SLIMKTE Slim Kit - Certain

QNTSK40 Premium Kit

New!

& External Hex
(pictured)

SLIMKT

SLIMKTE

QNTSK20

QNTSK40U

QNTSK40

Certain

Certain/External Hex

Starter (Basic) Kit

Upgrade Kit

Premium Kit

Description

Item Numbers

•

•

•

•

Quad Shaping Drill, 3.25mm(D) x 8.5mm(L)

QSD3285

•

•

•

•

•

Quad Shaping Drill, 3.25mm(D) x 10mm(L)

QSD3210

•

•

•

•

•

Quad Shaping Drill, 3.25mm(D) x 11.5mm(L)

QSD3211

•

•

•

•

•

Quad Shaping Drill, 3.25mm(D) x 13mm(L)

QSD3213

•

•

Quad Shaping Drill, 3.25mm(D) x 15mm(L)

QSD3215

•

•

•

•

Quad Shaping Drill, 4mm(D) x 8.5mm(L)

QSD485

•

•

•

•

•

Quad Shaping Drill, 4mm(D) x 10mm(L)

QSD410

•

•

•

•

•

Quad Shaping Drill, 4mm(D) x 11.5mm(L)

QSD411

•

•

•

•

•

Quad Shaping Drill, 4mm(D) x 13mm(L)

QSD413

•

•

Quad Shaping Drill, 4mm(D) x 15mm(L)

QSD415

•

•

Quad Shaping Drill, 5mm(D) x 8.5mm(L)

QSD585

•

•

•

Quad Shaping Drill, 5mm(D) x 10mm(L)

QSD510

•

•

•

Quad Shaping Drill, 5mm(D) x 11.5mm(L)

QSD511

•

•

•

Quad Shaping Drill, 5mm(D) x 13mm(L)

QSD513

•

•

Quad Shaping Drill, 5mm(D) x 15mm(L)

QSD515

•

•

Quad Shaping Drill, 6mm(D) x 8.5mm(L)

QSD685

•

•

Quad Shaping Drill, 6mm(D) x 10mm(L)

QSD610

•

•

Quad Shaping Drill, 6mm(D) x 11.5mm(L)

QSD611

•

•

Quad Shaping Drill, 6mm(D) x 13mm(L)

QSD613

•

•

•

•

•

•

•

•

•

•

Quad Shaping Drill, 6mm(D) x 15mm(L)

QSD615

•

•

Dense Bone Tap, 3.25mm(D) x 8.5mm(L)

NTAP3285

•

•

•

Dense Bone Tap, 3.25mm(D) x 10mm(L)

NTAP3210

•

•

•

Dense Bone Tap, 3.25mm(D) x 11.5mm(L)

NTAP3211

•

•

•

Dense Bone Tap, 3.25mm(D) x 13mm(L)

NTAP3213

•

•

Dense Bone Tap, 3.25mm(D) x 15mm(L)

NTAP3215

•

•

•

•

Dense Bone Tap, 4mm(D) x 8.5mm(L)

NTAP485

•

•

•

•

•

Dense Bone Tap, 4mm(D) x 10mm(L)

NTAP410

•

•

•

•

•

Dense Bone Tap, 4mm(D) x 11.5mm(L)

NTAP411

•

•

•

•

•

Dense Bone Tap, 4mm(D) x 13mm(L)

NTAP413

•

•

Dense Bone Tap, 4mm(D) x 15mm(L)

NTAP415

•

•

Dense Bone Tap, 5mm(D) x 8.5mm(L)

NTAP585

•

•

Dense Bone Tap, 5mm(D) x 10mm(L)

NTAP510

•

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

28

Site Preparation Technologies
Tapered Surgical Kits Cont’d

SLIMKT

SLIMKTE

QNTSK20

QNTSK40U

QNTSK40

Certain®

Certain/External Hex

Starter (Basic) Kit

Upgrade Kit

Premium Kit

Description

Item Numbers

•

•

•

Dense Bone Tap, 5mm(D) x 11.5mm(L)

NTAP511

•

•

•

Dense Bone Tap, 5mm(D) x 13mm(L)

NTAP513

•

•

Dense Bone Tap, 5mm(D) x 15mm(L)

NTAP515

•

•

Dense Bone Tap, 6mm(D) x 8.5mm(L)

NTAP685

•

•

Dense Bone Tap, 6mm(D) x 10mm(L)

NTAP610

•

•

Dense Bone Tap, 6mm(D) x 11.5mm(L)

NTAP611

•

•

Dense Bone Tap, 6mm(D) x 13mm(L)

NTAP613

•

•

Dense Bone Tap, 6mm(D) x 15mm(L)

NTAP615

•

•

•

Tapered Implant Dense Bone Tap Kit Tray

NTAPKT

•

•

•

•

Tapered Implant Depth Indicator, 3.25mm(D) x 8.5mm(L) 3ea.

NTDI3285*

•

•

•

•

•

Tapered Implant Depth Indicator, 3.25mm(D) x 10mm(L)

NTDI3210

•

•

•

•

•

Tapered Implant Depth Indicator, 3.25mm(D) x 11.5mm(L)

NTDI3211

•

•

•

•

•

Tapered Implant Depth Indicator, 3.25mm(D) x 13mm(L)

NTDI3213

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Tapered Implant Depth Indicator, 3.25mm(D) x 15mm(L)

NTDI3215

•

•

Tapered Implant Depth Indicator, 4mm(D) x 8.5mm(L) 3ea.

NTDI485*

•

•

•

Tapered Implant Depth Indicator, 4mm(D) x 10mm(L)

NTDI410

•

•

•

Tapered Implant Depth Indicator, 4mm(D) x 11.5mm(L)

NTDI411

•

•

•

Tapered Implant Depth Indicator, 4mm(D) x 13mm(L)

NTDI413

•

•

Tapered Implant Depth Indicator, 4mm(D) x 15mm(L)

NTDI415

•

•

Tapered Implant Depth Indicator, 5mm(D) x 8.5mm(L) 3ea.

NTDI585

•

•

•

Tapered Implant Depth Indicator, 5mm(D) x 10mm(L)

NTDI510

•

•

•

Tapered Implant Depth Indicator, 5mm(D) x 11.5mm(L)

NTDI511

•

•

•

Tapered Implant Depth Indicator, 5mm(D) x 13mm(L)

NTDI513

•

•

Tapered Implant Depth Indicator, 5mm(D) x 15mm(L)

NTDI515

•

•

Tapered Implant Depth Indicator, 6mm(D) x 8.5mm(L) 3ea.

NTDI685

•

•

Tapered Implant Depth Indicator, 6mm(D) x 10mm(L)

NTDI610

•

•

Tapered Implant Depth Indicator, 6mm(D) x 11.5mm(L)

NTDI611

•

•

Tapered Implant Depth Indicator, 6mm(D) x 13mm(L)

NTDI613

•

•

Tapered Implant Depth Indicator, 6mm(D) x 15mm(L)

NTDI615

•

•

•

Certain Countersink Drill, 4mm(D)

ICD100

•

•

QSD/NTDI Surgical Tray w/Plastic Insert

QNTSKT

•

•

Open End Wrench

CW100

•

•

Ratchet Wrench

WR150

Hight Torque Indicating Ratchet Wrench

H-TIRW

•

•

Ratchet Extension (Short), 6mm(L)

RE100

•

•

Ratchet Extension (Long), 15mm(L)

RE200
*One (1) each for SLIMKT and SLIMKTE.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

29

Site Preparation Technologies
Tapered Surgical Kits Cont’d

SLIMKT

SLIMKTE

QNTSK20

QNTSK40U

QNTSK40

Certain®

Certain/External Hex

Starter (Basic) Kit

Upgrade Kit

Premium Kit

•

•

•

•

Description

Item Numbers

•

•

Implant Depth Gauge, 20mm(L)

DP020

•

•

•

Narrow Posterior Hexed Driver, 17mm(L)

PHD00N

•

•

•

Posterior Large Hexed Driver, 17mm(L)

PHD02N

•

Narrow Right Angle Large Hexed Driver Tip, 24mm(L)

RASH3N

•

Direction Indicator, 2mm(D) x 10mm(L) 3ea.

DI100

•

•

•

Handpiece Connector

MDR10

•

•

•

Implant Mount, 3.4mm(D) x 15mm(L)

MMC15

•

•

ACT Pointed Starter Drill

ACTPSD

•

•

ACT Reusable Twist Drill, 2mm(D) x 10mm(L)

ACT2010

•

•

®

•

•

ACT Reusable Twist Drill, 2mm(D) x 15mm(L)

ACT2015

•

•

ACT Reusable Twist Drill, 2mm(D) x 20mm(L)

ACT2020

•

•

•

•

ACT Drill Extension

ACTDE

•

•

•

•

Certain Implant Placement Driver Tip (Short), 4.1, 5, 6mm(D)

IIPDTS

•

•

•

•

Certain Implant Placement Driver Tip (Short), 3.4mm(D)

IMPDTS

•

•

Certain Implant Placement Driver Tip (Long), 4.1, 5, 6mm(D)

IIPDTL

•

•

Certain Implant Placement Driver Tip (Long), 3.4mm(D)

IMPDTL

•

•

Certain Universal Ratchet Extension Driver (Short), 6mm(L)

IRE100U

•

•

•

•

Certain Universal Ratchet Extension Driver (Long), 15mm(L) IRE200U

•

•

Certain Driver Replacement O-Rings, 10-pack

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

30

IRORDR

Site Preparation Technologies
Parallel Walled Surgical Kits

PSKT40 Premium Kit

For Certain® Internal Connection Implants

PSKT01

PSKT35

PSKT40

Starter (Basic) Kit

Certain Premium Kit

Premium Kit

Description

Item Numbers

•

•

•

Plastic Surgical Tray Organizer

PTT300I

•

•

•

Plastic Tray Organizer for PTT300I

PTT100

•

•

ACT® Reusable Twist Drill, 2mm(D) x 10mm(L)

ACT2010

•

•

ACT Reusable Twist Drill, 2mm(D) x 15mm(L)

ACT2015

•

•

ACT Reusable Twist Drill, 2mm(D) x 20mm(L)

ACT2020

•

•

ACT Reusable Twist Drill, 2.75mm(D) x 10mm(L)

ACT2710

•

•

ACT Reusable Twist Drill, 2.75mm(D) x 15mm(L)

ACT2715

•

ACT Reusable Twist Drill, 2.75mm(D) x 20mm(L)

ACT2720

•

ACT Reusable Twist Drill, 3mm(D) x 10mm(L)

ACT3010

•
•

•

•

ACT Reusable Twist Drill, 3mm(D) x 15mm(L)

ACT3015

•

ACT Reusable Twist Drill, 3mm(D) x 20mm(L)

ACT3020

•

•

ACT Reusable Twist Drill, 3.25mm(D) x 10mm(L)

ACT3210

•

•

•

ACT Reusable Twist Drill, 3.25mm(D) x 15mm(L)

ACT3215

•

ACT Reusable Twist Drill, 3.25mm(D) x 20mm(L)

ACT3220

•

•

•

ACT Reusable Twist Drill, 3.85mm(D) x 10mm(L)

ACT3810

•

•

•

ACT Reusable Twist Drill, 3.85mm(D) x 15mm(L)

ACT3815

•

•

•

ACT Reusable Twist Drill, 3.85mm(D) x 20mm(L)

ACT3820

•

•

ACT Reusable Twist Drill, 4.25mm(D) x 8.5mm(L)

ACT4285

•

•

•

ACT Reusable Twist Drill, 4.25mm(D) x 13mm(L)

ACT4213

•

•

•

ACT Reusable Twist Drill, 4.25mm(D) x 18mm(L)

ACT4218

•

•

ACT Reusable Twist Drill, 4.85mm(D) x 8.5mm(L)

ACT4885

•

•

ACT Reusable Twist Drill, 4.85mm(D) x 13mm(L)

ACT4813

•

•

ACT Reusable Twist Drill, 4.85mm(D) x 18mm(L)

ACT4818

•

•

ACT Reusable Twist Drill, 5.25mm(D) x 8.5mm(L)

ACT5285

•

•

ACT Reusable Twist Drill, 5.25mm(D) x 13mm(L)

ACT5213

•

•

ACT Reusable Twist Drill, 5.25mm(D) x 18mm(L)

ACT5218

•

•

ACT Drill Extension

ACTDE
®

•

•

Countersink Drill, OSSEOTITE XP 4/5, PREVAIL 4/5/4

CD4500

•

•

•

Countersink Depth Indicator for CD4500

CDI4500

•

•

•

Countersink/Pilot Drill, 5mm(D)

CD500

•

•

Countersink Drill, OSSEOTITE XP 5/6, PREVAIL 5/6/5

CD5600

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

31

®

Site Preparation Technologies
Parallel Walled Surgical Kits Cont’d

PSKT01

PSKT35

PSKT40

Starter (Basic) Kit

Certain® Premium Kit

Premium Kit

•

•

•

•

•

•

•

•

Description

Item Numbers

•

Countersink Depth Indicator for CD5600

CDI5600

•

Certain Countersink Drill, 4mm(D)

ICD100

•

Countersink Depth Indicator for ICD100

ICDI100

•

Countersink Drill, 4.1mm(D)

CD100

•

•

Countersink/Pilot Drill, 6mm(D)

CD600

•

•

Pilot Drill, 2-3mm(D)

PD100

•

•

Implant Dense Bone Tap, 3.25mm(D) x 18mm(L)

MTAP2

•

•

Implant Dense Bone Tap, 4mm(D) x 13mm(L)

TAP413

•

Implant Dense Bone Tap, 5mm(D) x 13mm(L)

TAP53S

•

Implant Dense Bone Tap, 6mm(D) x 13mm(L)

TAP63S

•

•

®

•

OSSEOTITE 2 Dense Bone Tap, 5mm(D) x 7-13mm(L)

XTAP53S

•

OSSEOTITE 2 Dense Bone Tap, 6mm(D) x 7-13mm(L)

XTAP63S

•

•

Certain Implant Driver Tip (Short), 3.4mm(D)

IMPDTS

•

•

•

Certain Implant Driver Tip (Long), 3.4mm(D)

IMPDTL

•

•

•

Certain Implant Placement Driver Tip (Short), 4.1, 5, 6mm(D) IIPDTS

•

•

•

Certain Implant Placement Driver Tip (Long), 4.1, 5, 6mm(D) IIPDTL

•

•

•

Certain Universal Ratchet Extension Driver (Short), 6mm(L) IRE100U

•

•

•

Certain Universal Ratchet Extension Driver (Long), 15mm(L) IRE200U

•

•

Narrow Small Hexed Hand Driver, 17mm(L)

PHD00N

•

•

•

Narrow Large Hexed Hand Driver, 17mm(L)

PHD02N

•

•

•

Narrow Large Hexed Driver, Tip 24mm(L)

RASH3N

•

•

Driver Tip Replacement O-Rings, 10-pack

IRORDR

•

•

•
•

•

•

•

Handpiece Connector

MDR10

•

Open End Wrench

CW100

•

Ratchet Wrench

WR150

•

Ratchet Extension (Short), 6mm(L)

RE100

•

•

•

Ratchet Extension (Long), 15mm(L)

RE200

•

•

•

Implant Depth Gauge, 20mm(L)

DP020

•

•

Implant Mount, 3.4mm(D) x 15mm(L)

MMC15

•

•

•

Direction Indicator, 2mm(D) x 10mm(L) 3ea.

DI100

•

•

•

Stainless Steel Round Drill, 2mm(D)

RD100

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

32

Site Preparation Technologies
Parallel Walled Surgical Kits
For External Hex Connection Implants

PSKT10

PSKT20

PSKT30

Starter (Basic) Kit

Standard Kit

Premium Kit

•

•
•

Description

Item Numbers

•

Plastic Surgical Tray Organizer

PTT300I

•

Plastic Organizer Tray for PTT300I

PTT100

•

•

ACT Reusable Twist Drill, 2mm(D) x 10mm(L)

ACT2010

•

•

ACT Reusable Twist Drill, 2mm(D) x 15mm(L)

ACT2015

•

•

ACT Reusable Twist Drill, 2mm(D) x 20mm(L)

ACT2020

•

•

ACT Reusable Twist Drill, 2.75mm(D) x 10mm(L)

ACT2710

•

•

ACT Reusable Twist Drill, 2.75mm(D) x 15mm(L)

ACT2715

•

•

ACT Reusable Twist Drill, 2.75mm(D) x 20mm(L)

ACT2720

•

•

ACT Reusable Twist Drill, 3mm(D) x 10mm(L)

ACT3010

•

•

ACT Reusable Twist Drill, 3mm(D) x 15mm(L)

ACT3015

•

•

ACT Reusable Twist Drill, 3mm(D) x 20mm(L)

ACT3020

•

•

ACT Reusable Twist Drill, 3.25mm(D) x 10mm(L)

ACT3210

•

•

ACT Reusable Twist Drill, 3.25mm(D) x 15mm(L)

ACT3215

•

•

ACT Reusable Twist Drill, 3.25mm(D) x 20mm(L)

ACT3220

•

ACT Reusable Twist Drill, 4.25mm(D) x 8.5mm(L)

ACT4285

•

ACT Reusable Twist Drill, 4.25mm(D) x 13mm(L)

ACT4213

•

ACT Reusable Twist Drill, 4.25mm(D) x 18mm(L)

ACT4218

•

ACT Reusable Twist Drill, 5.25mm(D) x 8.5mm(L)

ACT5285

•

ACT Reusable Twist Drill, 5.25mm(D) x 13mm(L)

ACT5213

•

ACT Reusable Twist Drill, 5.25mm(D) x 18mm(L)

ACT5218

•

•

ACT Drill Extension

ACTDE

•

•

Pilot Drill, 2-3mm(D)

PD100

•

®

•

Countersink Drill, 4.1mm(D)

CD100

•

Countersink Drill, OSSEOTITE XP ® 4/5, PREVAIL® 4/5/4

CD4500

•

Countersink/Pilot Drill, 5mm(D)

CD500

•

Countersink Drill, OSSEOTITE XP 5/6, PREVAIL 5/6/5

CD5600

•

Countersink/Pilot Drill, 6mm(D)

CD600

•

•

Implant Dense Bone Tap, 3.25mm(D) x 18mm(L)

MTAP2

•

•

Implant Dense Bone Tap, 4mm(D) x 13mm(L)

TAP413

•

Implant Dense Bone Tap, 5mm(D) x 13mm(L)

TAP53S

•

Implant Dense Bone Tap, 6mm(D) x 13mm(L)

TAP63S

•

OSSEOTITE® 2 Dense Bone Tap, 5mm(D) x 7-13mm(L)

XTAP53S

•

OSSEOTITE 2 Dense Bone Tap, 6mm(D) x 7-13mm(L)

XTAP63S

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

33

Site Preparation Technologies
Parallel Walled Surgical Kits Cont’d

PSKT10

PSKT20

PSKT30

Starter (Basic) Kit

Standard Kit

Premium Kit

•

•

•

•

•
•

Description

Item Numbers

•

Narrow Small Hexed Hand Driver, 17mm(L)

PHD00N

•

Narrow Large Hexed Hand Driver, 17mm(L)

PHD02N

•

•

Narrow Large Hexed Driver Tip, 24mm(L)

RASH3N

•

•

Handpiece Connector

MDR10

•

•

•

Open End Wrench

CW100

•

•

•

Ratchet Wrench

WR150

•

•

•

Ratchet Extension (Short), 6mm(L)

RE100

•

•

•

Ratchet Extension (Long), 15mm(L)

RE200

•

•

•

Implant Depth Gauge, 20mm(L)

DP020

•

•

Implant Mount, 3.4mm(D) x 15mm(L)

MMC15

•

•

Direction Indicator, 2mm(D) x 10mm(L) 3ea.

DI100

•

•

Stainless Steel Round Drill, 2mm(D)

RD100

PTT100

Plastic Tray Organizer

NOTE: For use with PTT300I

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

34

Site Preparation Technologies
ACT® Non-Irrigated Reusable Twist Drills
Implant
Lengths

Drill
Lengths

2mm(D)

2.3mm(D) 2.75mm(D)

N/A

3.15mm(D) 3.25mm(D) 3.85mm(D) 4.25mm(D) 4.85mm(D) 5.25mm(D)

7 – 8.5mm

8.5mm N/A

7 – 10mm

10mm ACT2010 N/A

ACT2710 ACT3010 ACT3110 ACT3210 ACT3810 N/A

7 – 13mm

13mm N/A

N/A

7 – 15mm

15mm ACT2015 N/A

ACT2715 ACT3015 ACT3115 ACT3215 ACT3815 N/A

7 – 18mm

18mm N/A

N/A

7 – 20mm

20mm ACT2020 N/A

N/A

N/A

N/A

3mm(D)

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

ACT4285 ACT4885 ACT5285
N/A

N/A

ACT4213 ACT4813 ACT5213
N/A

N/A

ACT4218 ACT4818 ACT5218

ACT2720 ACT3020 ACT3120 ACT3220 ACT3820 N/A

N/A

N/A

Surgical Drills
Drills
Description

Disposable

Reusable

Round Drill, 2mm

DR100

RD100

ACT Pointed Starter Drill

N/A

ACTPSD

Pilot Drill, 2-3mm

DP100

PD100

Countersink Drill - External Connection, 4.1mm

DC100

CD100

Countersink Drill - Certain® Connection, 4.1mm

N/A

ICD100

Countersink Drill, 4/5mm

N/A

CD4500

Countersink/Pilot Drill, 5mm

DC500

CD500

Countersink Drill, 5/6mm

N/A

CD5600

Countersink/Pilot Drill, 6mm

DC600

CD600

Quad Shaping Drills
For Tapered Implants

Drill Lengths

3.25mm(D)

4mm(D)

5mm(D)

6mm(D)

8.5mm

QSD3285

QSD485

QSD585

QSD685

10mm

QSD3210

QSD410

QSD510

QSD610

11.5mm

QSD3211

QSD411

QSD511

QSD611

13mm

QSD3213

QSD413

QSD513

QSD613

15mm

QSD3215

QSD415

QSD515

QSD615

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

35

6

Site Preparation Technologies
Surgical Components
Handpiece Bone Profilers (Packaged with Guide Pin)
Description

Item Numbers

Bone Profiler, 3.4mm(D) x 3.8mm(P)

BP340

Bone Profiler, 3/4, 4.1mm(D) x 5mm(P)

BP450

Bone Profiler, 3/4, 4.1mm(D) x 6mm(P)

BP460

Bone Profiler, 3/4, 4.1mm(D) x 7.5mm(P)

BP475

Bone Profiler, 4/5, 5mm(D) x 5mm(P)

BP550

Bone Profiler, 4/5, 5mm(D) x 6mm(P)

BP560

Bone Profiler, 4/5, 5mm(D) x 7.5mm(P)

BP575

Bone Profiler, 5/6, 6mm(D) x 6mm(P)

BP660

Bone Profiler, 5/6, 6mm(D) x 7.5mm(P)

BP675

Low Profile Abutment Bone Profilers
Low Profile Abutment Bone Profiler, 3.4mm(D)

LPCBP3

Low Profile Abutment Bone Profiler, 4.1mm(D)

LPCBP4

Low Profile Abutment Bone Profiler, 5mm(D)

LPCBP5

Certain® Manual Bone Profilers
Certain Manual Bone Profiler, 3.4mm(D) x 4.1mm(P)

IMMBP

Certain Manual Bone Profiler, 3.4mm(D) x 5mm(P)

IMMBP35

Certain Manual Bone Profiler, 4.1mm(D) x 5mm(P)

IMBP4

Certain Manual Bone Profiler, 5mm(D) x 6mm(P)

IMBP5

Certain Low Profile Abutment Manual Bone Profiler, 3.4mm(D)

ILPCMBP3

Certain Low Profile Abutment Manual Bone Profiler, 4.1mm(D)

ILPCMBP4

Certain Low Profile Abutment Manual Bone Profiler, 5mm(D)

ILPCMBP5

Bone Profiler Guide Pins
Bone Profiler Guide Pin, 4.1, 5 & 6mm(D)

BPGUIDE

Guide Pins are included in all External Connection Bone Profiler Components
and Kits. For Certain Internal Connections, please order the appropriate
Certain Bone Profiler Guide Pin listed below.
Certain Bone Profiler Guide Pin, 3.25mm(D) 3-pack

IBPMGP

Certain Bone Profiler Guide Pin, 4.1, 5 & 6mm(D) 3-pack

IBPGP

Bone Profiler Organizers & Kits
Bone Profiler Organizer Box, 4.1mm(D)

BPKITB

Bone Profiler Organizer Box, 5 & 6mm(D)

BPAKTB

Bone Profiler Organizer Kit

BB001

Bone Profiler Kit - For use with 4.1mm(D) Implants

BPKIT

Contains: BP450, BP460, BP475, BB001

Bone Profiler Kit - For use with 5mm(D) or 6mm(D) Implants

BPAKT

Contains: BP550, BP560, BP575, BP660, BP675, BB001

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

36

Site Preparation Technologies
Surgical Components
Bone Taps

Implant Lengths

3.25mm(D)

3.75mm(D)

4mm(D)

5mm(D)

6mm(D)

8.5 – 18mm

MTAP1 (18mmL)

N/A

N/A

N/A

N/A

8.5 – 18mm

MTAP2 (27mmL)

N/A

N/A

N/A

N/A

N/A

TAP10

TAP410

N/A

N/A

7 – 10mm
7 – 13mm

N/A

TAP13

TAP413

N/A

N/A

7 – 20mm

N/A

TAP20

TAP420

N/A

N/A

7 – 8.5mm

N/A

N/A

N/A

TAP58S

TAP68S

7 – 13mm

N/A

N/A

N/A

TAP53S

TAP63S

7 – 18mm

N/A

N/A

N/A

TAP518S

TAP618S

Bone Taps -

&

6.5/7 – 8.5mm

N/A

N/A

N/A

XTAP58S

XTAP68S

6.5/7 – 13mm

N/A

N/A

N/A

XTAP53S

XTAP63S

6.5/7 – 18mm

N/A

N/A

N/A

XTAP518S

XTAP618S

Dense Bone Taps For
Tapered Implants

Implant Lengths

8.5mm

3.25mm(D)

4mm(D)

5mm(D)

6mm(D)

NTAP3285

NTAP485

NTAP585

NTAP685

10mm

NTAP3210

NTAP410

NTAP510

NTAP610

11.5mm

NTAP3211

NTAP411

NTAP511

NTAP611

13mm

NTAP3213

NTAP413

NTAP513

NTAP613

15mm

NTAP3215

NTAP415

NTAP515

NTAP615

NTAPK

Dense Bone Tap Kit

NOTE: Kit includes all of the Dense Bone Taps listed above.

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

37

Site Preparation Technologies
Surgical Components
Depth/Direction Indicators
For Tapered Implants

NTDIK

Depth/Direction Indicator Kit

NOTE: Kit includes all of the indicators listed above.

Implant Lengths

3.25mm(D)

4mm(D)

5mm(D)

6mm(D)

8.5mm

NTDI3285

NTDI485

NTDI585

NTDI685

10mm

NTDI3210

NTDI410

NTDI510

NTDI610

11.5mm

NTDI3211

NTDI411

NTDI511

NTDI611

13mm

NTDI3213

NTDI413

NTDI513

NTDI613

15mm

NTDI3215

NTDI415

NTDI515

NTDI615

Direction Indicators
DI100

2mm/3mm(D) x 10mm(L)

DI200

2mm/3mm(D) x 15mm(L)

DI2310

DI2315

2.3mm/3mm(D) x 10mm(L)
Anodized Blue

2.3mm/3mm(D) x 15mm(L)
Anodized Gold
2.3

2

2.3

2

3

3

3

3

Mounts
IDIKT

®

Certain Direction
Indicator Kit

IC015

MMKIT
Includes
2 each of:
ꅵ MMC03

15mm(L) Implant
Mount

IDI001

10mm(L)

3.1

IDIM01

3.4mm(D) Implant
Mount Kit
3.1

3mm(L)

4.8

10mm(L)
For 3.25mm(D)
Implant

4.8

ꅵ MMC15
15mm(L)
3.1
15

4.8

15

3

3.4

4.5

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

38

3.4

Site Preparation Technologies
Surgical Components
Miscellaneous Instrumentation
CW100

H-TIRW High Torque Indicating Ratchet Wrench

Open End Wrench
For use with External Connection Implants.

TST01

Titanium Suction Tip

TF002

Titanium Forceps

MALL1

Mallet

TE003

Titanium Elevator

Implant Depth Gauge

MIDTH

Manual Interchangeable Driver Tip Handle

Ratchet Extensions

TMP80

Tissue Measuring Post

Stainless Steel

DP020

IRE100U
IRE200U

RE100
RE200

6mm(L)
15mm(L)
8mm
6mm
4mm
2mm

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

39

Site Preparation Technologies
Surgical Components
Miscellaneous Instrumentation
ACTDE

MDR10

ACT® Drill Extension

Handpiece Connector

23

6

IC100

IRORDR

SGT25 Stent Guide Tubes
2.39 x Stainless Steel (25-PK)
10mm(L)

Surgical Index Coping

Certain® Implant Driver Replacement O-Rings

TP001

(Qty: 10)

4.1mm

Tissue Punch

TP005

5mm
TP006

6mm

IIPDTL

XDG00

Certain Implant Placement Driver Tip

Gelb Radiographic Depth Gauge Kit

Includes:
ꅵ XDG13

Long
IIPDTS

2mm(D)x 13mm(L)

Short

ꅵ XDG20
IMPDTL

2mm(D)x 20mm(L)

3.4mm(D)
Long

XDG01

2.3mm(D)
IMPDTS

Includes:

3.4mm(D)
Short

ꅵ XDG2313
2.3mm(D)x 13mm(L)

ꅵ XDG2320
2.3mm(D)x 20mm(L)
RMB30

Radiographic Marking Balls (30-PK)

5mm(D)

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

40

Site Preparation Technologies
Site Preparation Components
Straight And Angled Osteotomes
Item Numbers

Description

Straight OSSEOTITE Tapered

Osteotome Kit

Angled OSSEOTITE Tapered

Osteotome Kit

®

Straight OSSEOTITE Tapered, 3.25mm(D)

Osteotome

NTOST0
NTOST0A
NTOST3

Straight OSSEOTITE Tapered, 4mm(D)

Osteotome

NTOST4

Straight OSSEOTITE Tapered, 5mm(D)

Osteotome

NTOST5

Straight OSSEOTITE Tapered, 6mm(D)

Osteotome

NTOST6

Angled OSSEOTITE Tapered, 3.25mm(D)

Osteotome

NTOST3A

Angled OSSEOTITE Tapered, 4mm(D)

Osteotome

NTOST4A

Angled OSSEOTITE Tapered, 5mm(D)

Osteotome

NTOST5A

Angled OSSEOTITE Tapered, 6mm(D)

Osteotome

NTOST6A

Straight OSSEOTITE Tapered Osteotome Tray

NTOSTTRS

Angled OSSEOTITE Tapered Osteotome Tray

NTOSTTRA

Summer Osteotomes
Description

Summers Osteotome

Item Numbers

Kit #1-4

OST00

Summers Osteotome

Kit #1-5

OST10

Summers Osteotome

Kit #1-5, FS

OST20

Summers Osteotome

#1

OST01

Summers Osteotome

#2

OST02

Summers Osteotome

#3

OST03

Summers Osteotome

#4

OST04

Summers Osteotome

#5

OST05

Summers Osteotome For Future Site

OSTFS

Summers Osteotome System Tray

OSTTR

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

41

Site Preparation Technologies
Site Preparation Components
Sinus Elevation
Item Numbers

Description

Sinus Elevation Kit

SEKT1

Titanium Nitride Coated Bone Carrier

TIBC1

Small Membrane Elevator

ME100

Medium Membrane Elevator

ME200

Large Membrane Elevator

ME300

Large Titanium Plugger

TIPL1

Small Titanium Plugger

TIPS1

Sinus Elevation Tray

SEKTR

Trephine Burs
Description

Item Numbers

Trephine Bur, 2mm Inside Diameter/3mm Outside Diameter

TRE02

Trephine Bur, 4mm Inside Diameter/5mm Outside Diameter

TRE04

Trephine Bur, 5mm Inside Diameter/6mm Outside Diameter

TRE05

Trephine Bur, 6mm Inside Diameter/7mm Outside Diameter

TRE06

Trephine Bur, 8mm Inside Diameter/9.3mm Outside Diameter

TRE08

TIBC1

ME100

ME200

ME300

TIPL1

TIPS1

Sinus Elevators

TRE02

TRE04

TRE05

TRE06

Trephine Burs

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

42

TRE08

Regenerative Technologies
Product Overview
RegenerOss® Allograft
The options you want. The results you expect.
• Cortical or cancellous bone: mineralized or demineralized
• Three particle ranges: 200–300, 300–500, 500–800 microns
• Consistency from lot-to-lot
• Packaging is designed for ease of handling and quick,
convenient reconstitution
• Aseptically processed and irradiated products available
• 5-year shelf-life
Manufactured By The University of Miami Tissue Bank

RegenerOss Allograft Putty Plus
Demineralized bone matrix and mineralized bone chips/mixture.
• Contains 48% by weight DBM (28% cortical and 20%
cancellous chips) for optimal handling and bone regeneration
• Moldable, non-toxic, lecithin carrier that is highly resistant
to irrigation
• Osteoinductivity of every lot is validated by a cell proliferation
assay
• Ergonomic design features a smaller diameter syringe with
a curved tip to treat hard-to-reach defects
• DBM only option also available
• 2-year shelf-life
Manufactured By LifeLink Tissue Bank (AATB Certified)

Endobon® Xenograft Granules
A RegenerOss® Product.
• Bovine-derived Hydroxyapatite
• Osteoconductive material for bony in-growth
• 500–1000µm and 1000–2000µm particle sizes for
dental applications
• High porosity with interconnecting macro and micropores
• Easy to use packaging
• 3-year shelf-life
Manufactured By Biomet France Sarl

OsseoGuard® Resorbable Collagen
Membrane
The protection you need to grow.
• Dental barrier for guided bone regeneration
• Type I collagen bovine tendon
• Strong enough to resist tearing when tacked or sutured, yet
pliable for easy placement
• Resorption profile of 6-9 months
• Does not require removal when exposed
• 3-year shelf-life
Manufactured By Collagen Matrix, Inc., Franklin Lakes, NJ

43

Regenerative Technologies
Product Overview
OsseoGuard Flex® Resorbable
Collagen Membrane
Creating balance between flexibility and resorption profile.
• Same clinical benefits as OsseoGuard
• Flexible, yet won’t fold over onto itself
• Type I and III bovine dermis
• 2-year shelf-life
Manufactured By Collagen Matrix, Inc., Franklin Lakes, NJ

Biogran® Bioactive Glass
Bioactive glass for effective regeneration in most oral applications.
• Granules are the optimal size range, large enough not to pack too
densely, small enough to fully resorb
• Provides a unique protective environment needed for osteogenesis
• Completely resorbable through the Krebs cycle
• 100% synthetic
• Forms a cohesive mass when mixed with blood or sterile
saline, minimizing the potential for dry socket
• Pre-formed dappen dish or pre-formed dappen dish with
empty syringe
• 5-year shelf-life
Manufactured By BIOMET 3i

Safescraper® TWIST
Cortical bone scraper/collector.
• Unique design provides 160° cutting area and facilitates
access to difficult posterior regions
• Effectively harvests up to 5cc of bone
• Contains bone in a sterile exclusive chamber, which is
designed to protect patients from cross-contamination
• Shortens operating time and simplifies graft collection
• Lateral opening system provides device stability
• 3-year shelf-life
Manufactured By META® Advanced Medical Technology

44

Regenerative Technologies
Allografts
Item Numbers

Description

RegenerOss® Allograft
Demineralized Freeze Dried Bone Allograft (DFDBA)
& Freeze Dried Bone Allograft (FDBA)
Manufactured By:
Cancellous, Partially Demineralized

0.5cc

200-300µm

RDCA205

Cancellous, Partially Demineralized

1cc

200-300µm

RDCA210

Cancellous, Partially Demineralized

0.5cc

300-500µm

RDCA305

Cancellous, Partially Demineralized

1cc

300-500µm

RDCA310

Cancellous, Partially Demineralized

0.5cc

500-800µm

RDCA505

Cancellous, Partially Demineralized

1cc

500-800µm

RDCA510

Cortical, Partially Demineralized

0.5cc

200-300µm

RDCO205

Cortical, Partially Demineralized

1cc

200-300µm

RDCO210

Cortical, Partially Demineralized

0.5cc

300-500µm

RDCO305

Cortical, Partially Demineralized

1cc

300-500µm

RDCO310

Cortical, Partially Demineralized

0.5cc

500-800µm

RDCO505

Cortical, Partially Demineralized

1cc

500-800µm

RDCO510

Cancellous, Mineralized

0.5cc

200-300µm

RMCA205

Cancellous, Mineralized

1cc

200-300µm

RMCA210

Cancellous, Mineralized

0.5cc

300-500µm

RMCA305

Cancellous, Mineralized

1cc

300-500µm

RMCA310

Cancellous, Mineralized

0.5cc

500-800µm

RMCA505

Cancellous, Mineralized

1cc

500-800µm

RMCA510

Cortical, Mineralized

0.5cc

200-300µm

RMCO205

Cortical, Mineralized

1cc

200-300µm

RMCO210

Cortical, Mineralized

0.5cc

300-500µm

RMCO305

Cortical, Mineralized

1cc

300-500µm

RMCO310

Cortical, Mineralized

0.5cc

500-800µm

RMCO505

Cortical, Mineralized

1cc

500-800µm

RMCO510

Cancellous, Mineralized

2cc

200-300µm

RMCA220

Cancellous, Mineralized

2cc

300-500µm

RMCA320

Cancellous, Mineralized

2cc

500-800µm

RMCA520

Cortical, Mineralized

2cc

200-300µm

RMCO220

Cortical, Mineralized

2cc

300-500µm

RMCO320

Cortical, Mineralized

2cc

500-800µm

RMCO520

Cancellous, Partially Demineralized

2cc

200-300µm

RDCA220

Cancellous, Partially Demineralized

2cc

300-500µm

RDCA320

Cancellous, Partially Demineralized

2cc

500-800µm

RDCA520

Cortical, Partially Demineralized

2cc

200-300µm

RDCO220

Cortical, Partially Demineralized

2cc

300-500µm

RDCO320

Cortical, Partially Demineralized

2cc

500-800µm

RDCO520

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

45

Regenerative Technologies
Allografts (Cont’d)
Item Numbers

Description

Cancellous, Partially Demineralized, Irradiated

0.5cc

300-500µm

RDCA305r

Cancellous, Partially Demineralized, Irradiated

1cc

300-500µm

RDCA310r

Cortical, Partially Demineralized, Irradiated

0.5cc

200-300µm

RDCO205r

Cortical, Partially Demineralized, Irradiated

0.5cc

300-500µm

RDCO305r

Cortical, Partially Demineralized, Irradiated

1cc

300-500µm

RDCO310r

Cancellous, Mineralized, Irradiated

0.5cc

200-300µm

RMCA205r

Cancellous, Mineralized, Irradiated

0.5cc

300-500µm

RMCA305r

Cortical, Mineralized, Irradiated

0.5cc

300-500µm

RMCO305r

Cancellous, Partially Demineralized, Irradiated

2cc

300-500µm

RDCA320r

Cortical, Partially Demineralized, Irradiated

2cc

300-500µm

RDCO320r

Cancellous, Mineralized, Irradiated

1cc

300-500µm

RMCA310r

1cc

300-500µm

RMCO310r

Cortical, Mineralized, Irradiated

Special Order Allograft Items:

*Special order, allow up to 6 weeks.

Dura Mater Patch (Membrane)

4x5cm

0655*

Fascia Lata Patch (Membrane)

4x5cm

0716*

Right Hemi Mandible

0630*

Left Hemi Mandible

0631*

Full Mandible

0632*

Iliac Crest Strip

Small

0055*

Iliac Crest Strip

Medium

0473*

lliac Crest Strip

Large

0056*

Mineralized Cancellous Powder

10cc

100-200µm

1454*

Demineralized Cancellous Powder

10cc

100-200µm

1462*

Demineralized Cortical Powder

10cc

100-200µm

1465*

Dental M&M Block

Small

1507*

Dental M&M Block, Irradiated

Small

1523*

Dental M&M Block

Medium

1491*

Dental M&M Block, Irradiated

Medium

1522*

Dental M&M Block

Large

1508*

Large

1565*

Dental M&M Block, Irradiated

RegenerOss Allograft Putty
®

Demineralized Bone Matrix In A Lecithin Carrier
Manufactured By BIOMET Interpore Cross

0.5cc Syringe

ROAP05

1cc Syringe

ROAP10

2cc Syringe

ROAP20

RegenerOss Allograft Putty Plus
ROAPM05

0.5cc Syringe

ROAPM10

1cc Syringe
2cc Pack (4 x 0.5cc syringes)

ROAPM20

Value Pack!

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

46

Regenerative Technologies
Xenografts
Item Numbers

Description

Endobon Xenograft Granules
®

A RegenerOss® Product (Bovine-derived Hydroxyapatite Particulate)
Manufactured By Biomet France Sarl

500 – 1000µm

0.5ml

ROX05

500 – 1000µm

1ml

ROX10

500 – 1000µm

2ml

ROX20

1000 – 2000µm

2ml

ROXLG20

1000 – 2000µm

5ml

ROXLG50

1000 – 2000µm

8ml

ROXLG80

GBR Barriers
OsseoGuard® Membrane
Cross-linked Bovine Collagen
Manufactured By Collagen Matrix, Inc., Franklin Lakes, NJ

Resorbable Collagen Membrane

15mm x 20mm

OG1520

Resorbable Collagen Membrane

20mm x 30mm

OG2030

Resorbable Collagen Membrane

30mm x 40mm

OG3040

OsseoGuard Flex® Membrane
Cross-linked Highly Purified Bovine Dermis Collagen
Manufactured By Collagen Matrix, Inc., Franklin Lakes, NJ

Resorbable Collagen Membrane

15mm x 20mm

OGF1520

Resorbable Collagen Membrane

20mm x 30mm

OGF2030

Resorbable Collagen Membrane

30mm x 40mm

OGF3040

Alloplasts
Biogran®
100% Synthetic Resorbable Bone Graft Material
Mixing Cup (750mg) & Syringe

1-Pack

2100-0750

Mixing Cups (500mg)

7-Pack

2100-0003

Mixing Cups (750mg)

7-Pack

2100-0004

Mixing Cups (1500mg)

7-Pack

2100-0005

Autogenous
Safescraper ® TWIST
Disposable Cortical Bone Collector (3-pack)
Manufactured By META® Advanced Medical Technology

Curved
Straight

3987
3598

R. Quétin Bone-Mill
Stainless Steel Bone Grinder

QBM001

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

47

Patient Education Products
Item Numbers

Description
®

Patient Ed Model - DIEM 2 (4-unit)

DIEM2-4UNIT

Patient Ed Model - DIEM 2 (6-unit)

DIEM2-6UNIT

Patient Ed Model - OSSEOTITE® Implant

EXHEXMOD

Patient Ed Model - LOCATOR®

PEMODLOC

Patient Ed Model - Single/Multiple Teeth

PEMODSM

Patient Ed Brochure - Bone Loss (25-pack)

ART885

Patient Ed Brochure - Multiple Teeth (25-pack)

ART887

Patient Ed Brochure - Implant Retained, Fixed (25-pack)

ART888

Patient Ed Brochure - Implant Retained, LOCATOR (25-pack)

ART889

Patient Ed Brochure - Implant Retained, Bar (25-pack)

ART890

Patient Ed Brochure - Immediate Teeth Replacement, DIEM (25-pack) ART929
Patient Ed Care Card (25-pack)

ART930

Patient Ed Flip Chart

ART943

Patient Ed DVD - Multilingual Version

ART951EUR

Patient Ed Brochure - Bone Loss (Spanish Version)

ART957S

Patient Ed Awareness and Education Poster

ART962

Patient Ed Quad-fold Brochure with Holder (25-pack)

ART1154

Patient Ed General Brochure (25-pack)

ART1157

Patient Ed Regenerative Brochure

ART1178

Some products may not be available outside of the United States.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

48

Important Product Information For

Instructions For Use:
For a detailed explanation of the osteotomy preparation and
implant placement guidelines, please refer to the appropriate
Surgical Manual(s).

Dental Implants

Reuse of BIOMET 3i Products that are labeled for single-use
may result in product contamination, patient infection and/or
failure of the device to perform as intended.

Description:
BIOMET 3i Dental Implants are manufactured from biocompatible
titanium or titanium alloy. BIOMET 3i Dental Implants include
various surface treatments. For specific product descriptions,
please refer to individual product labels.

MRI Statement:
BIOMET 3i Dental Implants have not been evaluated for safety,
heating, migration, or compatibility in the Magnetic Resonance
Imaging (MRI) environment.
Precautions:
These devices are only to be used by trained professionals.
The surgical and restorative techniques required to properly
utilize these devices are highly specialized and complex
procedures. Improper technique can lead to implant failure,
loss of supporting bone, restoration fracture, screw loosening
and aspiration. When the clinician has determined adequate
primary stability is achieved, immediate functional loading can
be considered.

Indications For Use:
BIOMET 3i Dental Implants are intended for surgical placement
in the upper or lower jaw to provide a means for prosthetic
attachment in single tooth restorations and in partially or fully
edentulous spans with multiple single teeth utilizing delayed
loading, or as a terminal or intermediary abutment for fixed or
removable bridgework, and to retain overdentures. BIOMET 3i
T3®, NanoTite™ and OSSEOTITE® Dental Implants may also
utilize immediate loading for these indications.

The following should be taken into consideration when placing
dental implants: bone quality, oral hygiene and medical
conditions such as blood disorders or uncontrolled hormonal
conditions. The healing period varies depending on the quality
of the bone at the implantation site, the tissue response to the
implanted device and the surgeon’s evaluation of the patient’s
bone density at the time of the surgical procedure. Proper
occlusion should be evaluated on the implant restoration to
avoid excessive force during the healing period on the implant.

BIOMET 3i T3, NanoTite and OSSEOTITE Dental Implants are
intended for immediate function on single tooth and/or multiple
tooth applications when good primary stability is achieved, with
appropriate occlusal loading, in order to restore chewing function.
Contraindications:
Placement of dental implants may be precluded by both patient
conditions that are contraindications for surgery as well as
hypersensitivity to commercially pure titanium or titanium alloy
(including vanadium, aluminum and calcium phosphate).

It is recommended that implants less than 4mm diameter NOT
be placed in the posterior regions.

BIOMET 3i Dental Implants should not be placed in patients
where the remaining jaw bone is too diminished to provide
adequate implant stability.

Sterility:
All dental implants are supplied sterile and are labeled “STERILE”.
All products sold sterile are for single-use before the expiration
date printed on the product label. Do not use sterile products
if the packaging has been damaged or previously opened.
Do not re-sterilize.

Warnings:
Excessive bone loss or breakage of a dental implant may occur
when an implant is loaded beyond its functional capability.
Physiological and anatomical conditions may affect the
performance of dental implants.

Storage And Handling:
Devices should be stored at room temperature. Refer to
individual product labels and the Surgical Manual for special
storage or handling conditions.

Mishandling of small components inside the patient’s mouth
carries a risk of aspiration and/or swallowing.
Forcing the implant into the osteotomy deeper than the depth
established by the drills can result in damage to the implant,
driver or osteotomy.

Potential Adverse Events:
Potential adverse events associated with the use of dental
implants may include: failure to integrate, loss of integration,
dehiscence requiring bone grafting, perforation of the maxillary
sinus, inferior border, lingual plate, labial plate, inferior alveolar
canal or gingiva, infection as reported by abscess, fistula,
suppuration, inflammation, or radiolucency, persistent pain,
numbness, paresthesia, hyperplasia, excessive bone loss
requiring intervention, implant breakage or fracture, systemic
infection, nerve injury and aspiration.

For short implants, clinicians should closely monitor patients for
any of the following conditions: peri-implant bone loss, changes
to the implant’s response to percussion or radiographic changes
in bone to implant contact along the implant’s length. If the
implant shows mobility or greater than 50% bone loss, the
implant should be evaluated for possible removal. If a clinician
chooses a short implant, then the clinician should consider a
two-stage surgical approach, splinting a short implant to an
additional implant and placement of the widest possible fixture.
In addition, the clinician should allow longer periods for
osseointegration and avoid immediate loading.

Caution:
U.S. Federal Law restricts this device to sale by or on the order
of a licensed dentist or physician.

49

Important Product Information For

Instructions For Use:
For detailed information on the specific procedure for the
product you are using, please refer to the individual product
labels or the appropriate manual on the BIOMET 3i Website.

Restorative Products

requiring sterilization prior to use, BIOMET 3i recommends the
following sterilization parameters for wrapped items:
Steam gravity sterilization method (gravity-displacement cycle) Minimum exposure of fifteen (15) minutes timing at a
temperature of 270ºF (132ºC)* or

Description:
BIOMET 3i Restorative Products are manufactured from
biocompatible titanium, titanium alloy, gold, gold alloy,
zirconium, vanadium, stainless steel, polyetheretherketone
(PEEK), cobalt chromium alloy, and polyoxymethylene (Delrin).
Please refer to product guidelines for Use/Surgical Manual for
additional device information.

Pre-vacuum sterilization method (dynamic-air-removal cycle) Minimum exposure of four (4) minutes, four (4) pulses timing at
a temperature of 270ºF (132ºC).*
*Post sterilization, devices should be thoroughly dried for 30 minutes. Please refer
to the Surgical and Restorative Manual or package insert for the remaining care
and cleaning instructions.

Indications For Use:
BIOMET 3i Restorative Products are intended for use as an
accessory to endosseous dental implants for placement in the
maxilla and mandible.

Do not re-sterilize or autoclave components except where
indicated on the individual product label, where instructions
have been provided in the Restorative Manual or in any
additional product literature for the given component.

Provisional Abutments are intended for use as an accessory to
endosseous dental implants to support a prosthetic device in a
partially or fully edentulous patient. They are intended for use
to support a prosthesis in the mandible or maxilla for up to 180
days during endosseous and gingival healing, and are for nonocclusal loading of provisional restorations. The prosthesis will
be either cement, mechanically or screw-retained to the
abutment system based on individual product design. For
compatibility of BellaTek® Patient Specific Abutments, please
refer to the compatibility table in the accompanying document.

MRI Statement:
BIOMET 3i Restorative Products have not been evaluated for
safety, heating, migration, or compatibility in the Magnetic
Resonance Imaging (MRI) environment.
Precautions:
BIOMET 3i Restorative Products should only be used by trained
professionals. The surgical and restorative techniques required
to properly utilize these products are highly specialized and
complex procedures. Improper technique can lead to implant
failure, loss of supporting bone, restoration fracture, screw
loosening and aspiration. Components made from PEEK
material are intended for use for up to 180 days.

Contraindications:
Placement of BIOMET 3i Restorative Products are precluded by
known patient hypersensitivity to any of the materials listed in
the Description section above.

Potential Adverse Events:
Potential adverse events associated with the use of restorative
products may include: failure to integrate; loss of integration;
dehiscence requiring bone grafting; infection as reported by:
abscess, fistula, suppuration, inflammation, radiolucency; gingival
hyperplasia; excessive bone loss requiring intervention; fracture;
and nerve injury.

Warnings:
Mishandling of small components inside the patient’s mouth
carries a risk of aspiration and/or swallowing. Fracture of a
restoration may occur when an abutment is loaded beyond its
functional capability. Reuse of BIOMET 3i Products that are
labeled for single-use may result in product contamination,
patient infection and/or failure of the device to perform as
intended.

Storage And Handling:
BIOMET 3i Restorative Products should be stored at room
temperature. Refer to the Surgical Manual for special storage or
handling conditions.

PEEK components are intended for use to support single- or
multiple-unit provisional prostheses in the mandible or maxilla
for up to 180 days, at which time a definitive prosthesis should
be inserted.

Caution:
U.S. Federal Law restricts this device to sale by or on the order
of a licensed dentist or physician.

Sterility:
Some BIOMET 3i Restorative Products are supplied sterile.
Refer to individual product labels for sterilization information; all
sterile products are labeled “STERILE”. All products sold sterile
are for single-use before the “use by” date printed on the
product label. Do not use sterile products if the packaging has
been damaged or previously opened. Products provided nonsterile may need to be cleaned and sterilized prior to use.
Please refer to the individual product labels or Restorative
Manual for more information. For products provided non-sterile

50

Index
Item#

Description

Page#

Item#

Description

0055

Page#

ILIAC CREST STRIP, SMALL

46

ART889

PATIENT ED BROCHURE - IMPLANT RETAINED, LOCATOR® (25-PACK)

48

0056

ILIAC CREST STRIP, LARGE

46

ART890

PATIENT ED BROCHURE - IMPLANT RETAINED, BAR (25-PACK)

48

0473

ILIAC CREST STRIP, MEDIUM

46

ART929

PATIENT ED BROCHURE - IMMEDIATE TEETH REPLACEMENT, DIEM® (25-PACK) 48

0630

RIGHT HEMI MANDIBLE

46

ART930

PATIENT ED CARE CARD (25-PACK)

48

0631

LEFT HEMI MANDIBLE

46

ART943

PATIENT ED FLIP CHART

48

0632

FULL MANDIBLE

46

ART951EUR PATIENT ED DVD - MULTILINGUAL VERSION

0655

DURA MATER-PATCH (MEMBRANE), 4X5CM

46

ART957S

0716

FASCIA LATA PATCH (MEMBRANE), 4X5CM

46

ART962

PATIENT ED AWARENESS AND EDUCATION POSTER

48

1454

MINERALIZED CANCELLOUS POWDER, 10CC, 100-200µm

46

BB001

BONE PROFILER ORGANIZER KIT

36

1462

DEMINERALIZED CANCELLOUS POWDER, 10CC, 100-200µm

46

BNES365

3i T3® W/DCD® PARALLEL WALLED IMPLANT, 3.25MM(D) X 6.5MM(L)

7

1465

DEMINERALIZED CORTICAL POWDER, 10CC, 100-200µm

46

BNES385

3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.25MM(D) X 8.5MM(L)

7

1491

DENTAL M&M BLOCK, MEDIUM

46

BNES310

3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.25MM(D) X 10MM(L)

7

1507

DENTAL M&M BLOCK, SMALL

46

BNES311

3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L)

7

1508

DENTAL M&M BLOCK, LARGE

46

BNES313

3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.25MM(D) X 13MM(L)

7

1522

DENTAL M&M BLOCK, IRRADIATED, MEDIUM

46

BNES315

3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.25MM(D) X 15MM(L)

7

PATIENT ED BROCHURE - BONE LOSS (SPANISH VERSION)

48
48

1523

DENTAL M&M BLOCK, IRRADIATED, SMALL

46

BNES318

3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.25MM(D) X 18MM(L)

7

1565

DENTAL M&M BLOCK, IRRADIATED, LARGE

46

BNES3765

3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.75MM(D) X 6.5MM(L)

7

3598

SAFESCRAPER® TWIST, STRAIGHT (3-PACK)

47

BNES3785

3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.75MM(D) X 8.5MM(L)

7

3987

SAFESCRAPER TWIST, CURVED (3-PACK)

47

BNES3710

3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.75MM(D) X 10MM(L)

7

2100-0003

BIOGRAN® 500MG MIXING CUP (7-PACK)

47

BNES3711

3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.75MM(D) X 11.5MM(L)

7

2100-0004

BIOGRAN 750MG MIXING CUP (7-PACK)

47

BNES3713

3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.75MM(D) X 13MM(L)

7

2100-0005

BIOGRAN 1500MG MIXING CUP (7-PACK)

47

BNES3715

3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.75MM(D) X 15MM(L)

7

2100-0750

BIOGRAN 750MG MIXING CUP & SYRINGE (1-PACK)

47

BNES3718

3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.75MM(D) X 18MM(L)

7

31-3100

BIOMET 2MM FIXATION SYSTEM

ACT2010

ACT® REUSABLE TWIST DRILL, 2MM X 10MM

27

BNES465

3i T3 W/DCD PARALLEL WALLED IMPLANT, 4MM(D) X 6.5MM(L)

7

30,31,33,35

BNES485

3i T3 W/DCD PARALLEL WALLED IMPLANT, 4MM(D) X 8.5MM(L)

7

ACT2015

ACT REUSABLE TWIST DRILL, 2MM X 15MM

30,31,33,35

BNES410

3i T3 W/DCD PARALLEL WALLED IMPLANT, 4MM(D) X 10MM(L)

7

ACT2020

ACT REUSABLE TWIST DRILL, 2MM X 20MM

30,31,33,35

BNES411

3i T3 W/DCD PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L)

7

ACT2710

ACT REUSABLE TWIST DRILL, 2.75MM X 10MM

31,33,35

BNES413

3i T3 W/DCD PARALLEL WALLED IMPLANT, 4MM(D) X 13MM(L)

7

ACT2715

ACT REUSABLE TWIST DRILL, 2.75MM X 15MM

31,33,35

BNES415

3i T3 W/DCD PARALLEL WALLED IMPLANT, 4MM(D) X 15MM(L)

7

ACT2720

ACT REUSABLE TWIST DRILL, 2.75MM X 20MM

31,33,35

BNES418

3i T3 W/DCD PARALLEL WALLED IMPLANT, 4MM(D) X 18MM(L)

7

ACT3010

ACT REUSABLE TWIST DRILL, 3MM X 10MM

31,33,35

BNES565

3i T3 W/DCD PARALLEL WALLED IMPLANT, 5MM(D) X 6.5MM(L)

7

ACT3015

ACT REUSABLE TWIST DRILL, 3MM X 15MM

31,33,35

BNES585

3i T3 W/DCD PARALLEL WALLED IMPLANT, 5MM(D) X 8.5MM(L)

7

ACT3020

ACT REUSABLE TWIST DRILL, 3MM X 20MM

31,33,35

BNES510

3i T3 W/DCD PARALLEL WALLED IMPLANT, 5MM(D) X 10MM(L)

7

ACT3110

ACT REUSABLE TWIST DRILL, 3.15MM X 10MM

35

BNES511

3i T3 W/DCD PARALLEL WALLED IMPLANT, 5MM(D) X 11.5MM(L)

7

ACT3115

ACT REUSABLE TWIST DRILL, 3.15MM X 15MM

35

BNES513

3i T3 W/DCD PARALLEL WALLED IMPLANT, 5MM(D) X 13MM(L)

7

ACT3120

ACT REUSABLE TWIST DRILL, 3.15MM X 20MM

35

BNES515

3i T3 W/DCD PARALLEL WALLED IMPLANT, 5MM(D) X 15MM(L)

7

ACT3210

ACT REUSABLE TWIST DRILL, 3.25MM X 10MM

31,33,35

BNES518

3i T3 W/DCD PARALLEL WALLED IMPLANT, 5MM(D) X 18MM(L)

7

ACT3215

ACT REUSABLE TWIST DRILL, 3.25MM X 15MM

31,33,35

BNES665

3i T3 W/DCD PARALLEL WALLED IMPLANT, 6MM(D) X 6.5MM(L)

7

ACT3220

ACT REUSABLE TWIST DRILL, 3.25MM X 20MM

31,33,35

BNES685

3i T3 W/DCD PARALLEL WALLED IMPLANT, 6MM(D) X 8.5MM(L)

7

ACT3810

ACT REUSABLE TWIST DRILL, 3.85MM X 10MM

31,35

BNES610

3i T3 W/DCD PARALLEL WALLED IMPLANT, 6MM(D) X 10MM(L)

7

ACT3815

ACT REUSABLE TWIST DRILL, 3.85MM X 15MM

31,35

BNES611

3i T3 W/DCD PARALLEL WALLED IMPLANT, 6MM(D) X 11.5MM(L)

7

ACT3820

ACT REUSABLE TWIST DRILL, 3.85MM X 20MM

31,35

BNES613

3i T3 W/DCD PARALLEL WALLED IMPLANT, 6MM(D) X 13MM(L)

7

ACT4285

ACT REUSABLE TWIST DRILL, 4.25MM X 8.5MM

31,33,35

BNES615

3i T3 W/DCD PARALLEL WALLED IMPLANT, 6MM(D) X 15MM(L)

7

ACT4213

ACT REUSABLE TWIST DRILL, 4.25MM X 13MM

31,33,35

BNES618

3i T3 W/DCD PARALLEL WALLED IMPLANT, 6MM(D) X 18MM(L)

7

ACT4218

ACT REUSABLE TWIST DRILL, 4.25MM X 18MM

31,33,35

BNET3285

3i T3 W/DCD TAPERED IMPLANT, 3.25MM(D) X 8.5MM(L)

7

ACT4885

ACT REUSABLE TWIST DRILL, 4.85MM X 8.5MM

31,35

BNET3210

3i T3 W/DCD TAPERED IMPLANT, 3.25MM(D) X 10MM(L)

7

ACT4813

ACT REUSABLE TWIST DRILL, 4.85MM X 13MM

31,35

BNET3211

3i T3 W/DCD TAPERED IMPLANT, 3.25MM(D) X 11.5MM(L)

7

ACT4818

ACT REUSABLE TWIST DRILL, 4.85MM X 18MM

31,35

BNET3213

3i T3 W/DCD TAPERED IMPLANT, 3.25MM(D) X 13MM(L)

7

ACT5285

ACT REUSABLE TWIST DRILL, 5.25MM X 8.5MM

31,33,35

BNET3215

3i T3 W/DCD TAPERED IMPLANT, 3.25MM(D) X 15MM(L)

7

ACT5213

ACT REUSABLE TWIST DRILL, 5.25MM X 13MM

31,33,35

BNET485

3i T3 W/DCD TAPERED IMPLANT, 4MM(D) X 8.5MM(L)

7

ACT5218

ACT REUSABLE TWIST DRILL, 5.25MM X 18MM

31,33,35

BNET410

3i T3 W/DCD TAPERED IMPLANT, 4MM(D) X 10MM(L)

7

ACTDE

ACT DRILL EXTENSION

ACTPSD

ACT POINTED STARTER DRILL

ART1178

PATIENT ED REGENERATIVE BROCHURE

48

BNET415

3i T3 W/DCD TAPERED IMPLANT, 4MM(D) X 15MM(L)

7

ART885

PATIENT ED BROCHURE - BONE LOSS (25-PACK)

48

BNET585

3i T3 W/DCD TAPERED IMPLANT, 5MM(D) X 8.5MM(L)

7

ART887

PATIENT ED BROCHURE - MULTIPLE TEETH (25-PACK)

48

BNET510

3i T3 W/DCD TAPERED IMPLANT, 5MM(D) X 10MM(L)

7

ART888

PATIENT ED BROCHURE - IMPLANT RETAINED, FIXED (25-PACK)

48

BNET511

3i T3 W/DCD TAPERED IMPLANT, 5MM(D) X 11.5MM(L)

7

30,31,33,40

BNET411

3i T3 W/DCD TAPERED IMPLANT, 4MM(D) X 11.5MM(L)

7

31,35

BNET413

3i T3 W/DCD TAPERED IMPLANT, 4MM(D) X 13MM(L)

7

51

Index
Item#

Description

Page#

BNET513

3i T3® W/DCD® TAPERED IMPLANT, 5MM(D) X 13MM(L)

7

BNET515

3i T3 W/DCD TAPERED IMPLANT, 5MM(D) X 15MM(L)

7

BNET685

3i T3 W/DCD TAPERED IMPLANT, 6MM(D) X 8.5MM(L)

7

BNET610

3i T3 W/DCD TAPERED IMPLANT, 6MM(D) X 10MM(L)

7

BNET611

3i T3 W/DCD TAPERED IMPLANT, 6MM(D) X 11.5MM(L)

7

BNET613

3i T3 W/DCD TAPERED IMPLANT, 6MM(D) X 13MM(L)

7

BNET615

3i T3 W/DCD TAPERED IMPLANT, 6MM(D) X 15MM(L)

7

BNPS4310

3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
4/3 X 10MM(L)

2

BNPS4311

3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
4/3 X 11.5MM(L)

2

BNPS4313

3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
4/3 X 13MM(L)

2

BNPS4315

3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
4/3 X 15MM(L)

2

BNPS4385

3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
4/3 X 8.5MM(L)

2

BNPS5410

3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
5/4 X 10MM(L)

2

BNPS5411

3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
5/4 X 11.5MM(L)

2

BNPS5413

3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
5/4 X 13MM(L)

2

BNPS5415

3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
5/4 X 15MM(L)

2

BNPS5485

3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
5/4 X 8.5MM(L)

2

BNPS6510

3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
6/5 X 10MM(L)

2

BNPS6511

3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
6/5 X 11.5MM(L)

2

BNPS6513

3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
6/5 X 13MM(L)

2

BNPS6515

3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
6/5 X 15MM(L)

2

BNPS6585

3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
6/5 X 8.5MM(L)

2

BNPT4310

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 10MM(L)

1

BNPT4311

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 11.5MM(L) 1

BNPT4313

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 13MM(L)

1

BNPT4315

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 15MM(L)

1

BNPT4385

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 8.5MM(L)

1

BNPT5410

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 10MM(L)

1

BNPT5411

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 11.5MM(L) 1

BNPT5413

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 13MM(L)

1

BNPT5415

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 15MM(L)

1

BNPT5485

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 8.5MM(L)

1

BNPT6510

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 10MM(L)

1

BNPT6511

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 11.5MM(L) 1

BNPT6513

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 13MM(L)

Item#

Description

BNSS318

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
3.25MM(D) X 18MM(L)

BNSS385

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
3.25MM(D) X 8.5MM(L)

BNSS410

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
4MM(D) X 10MM(L)

BNSS411

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
4MM(D) X 11.5MM(L)

BNSS413

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
4MM(D) X 13MM(L)

BNSS415

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
4MM(D) X 15MM(L)

BNSS418

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
4MM(D) X 18MM(L)

BNSS485

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
4MM(D) X 8.5MM(L)

BNSS510

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
5MM(D) X 10MM(L)

BNSS511

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
5MM(D) X 11.5MM(L)

BNSS513

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
5MM(D) X 13MM(L)

BNSS515

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
5MM(D) X 15MM(L)

BNSS585

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
5MM(D) X 8.5MM(L)

BNSS610

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
6MM(D) X 10MM(L)

BNSS611

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
6MM(D) X 11.5MM(L)

BNSS613

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
6MM(D) X 13MM(L)

BNSS615

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
6MM(D) X 15MM(L)

BNSS685

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
6MM(D) X 8.5MM(L)

BNST3210

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
3.25MM(D) X 10MM(L)

1

BNST3211

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
3.25MM(D) X 11.5MM(L)

1

BNST3213

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
3.25MM(D) X 13MM(L)

1

BNST3215

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
3.25MM(D) X 15MM(L)

1

BNST3285

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
3.25MM(D) X 8.5MM(L)

1

BNST410

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
4MM(D) X 10MM(L)

1

BNST411

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
4MM(D) X 11.5MM(L)

1

BNST413

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
4MM(D) X 13MM(L)

1

BNST415

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
4MM(D) X 15MM(L)

1

1

Page#

BNPT6515

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 15MM(L)

1

BNPT6585

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 8.5MM(L)

1

BNSS310

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
3.25MM(D) X 10MM(L)

BNST485

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
4MM(D) X 8.5MM(L)

1

BNSS311

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
3.25MM(D) X 11.5MM(L)

BNST510

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
5MM(D) X 10MM(L)

1

BNSS313

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
3.25MM(D) X 13MM(L)

BNST511

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
5MM(D) X 11.5MM(L)

1

BNSS315

3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2
3.25MM(D) X 15MM(L)

52

Index
Item#

Description

BNST513

3i T3® W/DCD® NON-PLATFORM SWITCHED TAPERED IMPLANT,
5MM(D) X 13MM(L)

1

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
5MM(D) X 15MM(L)

1

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
5MM(D) X 8.5MM(L)

1

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
6MM(D) X 10MM(L)

1

BNST515
BNST585
BNST610

Page#

Item#

Description

Page#

BOET411

3i T3 TAPERED IMPLANT, 4MM(D) X 11.5MM(L)

7

BOET413

3i T3 TAPERED IMPLANT, 4MM(D) X 13MM(L)

7

BOET415

3i T3 TAPERED IMPLANT, 4MM(D) X 15MM(L)

7

BOET585

3i T3 TAPERED IMPLANT, 5MM(D) X 8.5MM(L)

7

BOET510

3i T3 TAPERED IMPLANT, 5MM(D) X 10MM(L)

7

BOET511

3i T3 TAPERED IMPLANT, 5MM(D) X 11.5MM(L)

7

BOET513

3i T3 TAPERED IMPLANT, 5MM(D) X 13MM(L)

7

BOET515

3i T3 TAPERED IMPLANT, 5MM(D) X 15MM(L)

7

BNST611

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
6MM(D) X 11.5MM(L)

1

BOET685

3i T3 TAPERED IMPLANT, 6MM(D) X 8.5MM(L)

7

BNST613

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
6MM(D) X 13MM(L)

1

BOET610

3i T3 TAPERED IMPLANT, 6MM(D) X 10MM(L)

7

BOET611

3i T3 TAPERED IMPLANT, 6MM(D) X 11.5MM(L)

7

BNST615

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
6MM(D) X 15MM(L)

1

BOET613

3i T3 TAPERED IMPLANT, 6MM(D) X 13MM(L)

7

BOET615

3i T3 TAPERED IMPLANT, 6MM(D) X 15MM(L)

7

BNST685

3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT,
6MM(D) X 8.5MM(L)

1

BOPS4310

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 4/3 X 10MM(L) 2

BOPS4311

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 4/3 X 11.5MM(L) 2

BOES365

3i T3 PARALLEL WALLED IMPLANT, 3.25MM(D) X 6.5MM(L)

7

BOPS4313

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 4/3 X 13MM(L) 2

BOES385

3i T3 PARALLEL WALLED IMPLANT, 3.25MM(D) X 8.5MM(L)

7

BOPS4315

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 4/3 X 15MM(L) 2

BOES310

3i T3 PARALLEL WALLED IMPLANT, 3.25MM(D) X 10MM(L)

7

BOPS4385

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 4/3 X 8.5MM(L) 2

BOES311

3i T3 PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L)

7

BOPS5410

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 5/4 X 10MM(L) 2

BOES313

3i T3 PARALLEL WALLED IMPLANT, 3.25MM(D) X 13MM(L)

7

BOPS5411

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 5/4 X 11.5MM(L) 2

BOES315

3i T3 PARALLEL WALLED IMPLANT, 3.25MM(D) X 15MM(L)

7

BOPS5413

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 5/4 X 13MM(L) 2

BOES318

3i T3 PARALLEL WALLED IMPLANT, 3.25MM(D) X 18MM(L)

7

BOPS5415

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 5/4 X 15MM(L) 2

BOES3765

3i T3 PARALLEL WALLED IMPLANT, 3.75MM(D) X 6.5MM(L)

7

BOPS5485

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 5/4 X 8.5MM(L) 2

BOES3785

3i T3 PARALLEL WALLED IMPLANT, 3.75MM(D) X 8.5MM(L)

7

BOPS6510

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 6/5 X 10MM(L) 2

BOES3710

3i T3 PARALLEL WALLED IMPLANT, 3.75MM(D) X 10MM(L)

7

BOPS6511

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 6/5 X 11.5MM(L) 2

BOES3711

3i T3 PARALLEL WALLED IMPLANT, 3.75MM(D) X 11.5MM(L)

7

BOPS6513

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 6/5 X 13MM(L) 2

BOES3713

3i T3 PARALLEL WALLED IMPLANT, 3.75MM(D) X 13MM(L)

7

BOPS6515

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 6/5 X 15MM(L) 2

BOES3715

3i T3 PARALLEL WALLED IMPLANT, 3.75MM(D) X 15MM(L)

7

BOPS6585

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 6/5 X 8.5MM(L) 2

BOES3718

3i T3 PARALLEL WALLED IMPLANT, 3.75MM(D) X 18MM(L)

7

BOPT4310

3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 10MM(L)

1

BOES465

3i T3 PARALLEL WALLED IMPLANT, 4MM(D) X 6.5MM(L)

7

BOPT4311

3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 11.5MM(L)

1

BOES485

3i T3 PARALLEL WALLED IMPLANT, 4MM(D) X 8.5MM(L)

7

BOPT4313

3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 13MM(L)

1

BOES410

3i T3 PARALLEL WALLED IMPLANT, 4MM(D) X 10MM(L)

7

BOPT4315

3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 15MM(L)

1

BOES411

3i T3 PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L)

7

BOPT4385

3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 8.5MM(L)

1

BOES413

3i T3 PARALLEL WALLED IMPLANT, 4MM(D) X 13MM(L)

7

BOPT5410

3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 10MM(L)

1

BOES415

3i T3 PARALLEL WALLED IMPLANT, 4MM(D) X 15MM(L)

7

BOPT5411

3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 11.5MM(L)

1

BOES418

3i T3 PARALLEL WALLED IMPLANT, 4MM(D) X 18MM(L)

7

BOPT5413

3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 13MM(L)

1

BOES565

3i T3 PARALLEL WALLED IMPLANT, 5MM(D) X 6.5MM(L)

7

BOPT5415

3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 15MM(L)

1

BOES585

3i T3 PARALLEL WALLED IMPLANT, 5MM(D) X 8.5MM(L)

7

BOPT5485

3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 8.5MM(L)

1

BOES510

3i T3 PARALLEL WALLED IMPLANT, 5MM(D) X 10MM(L)

7

BOPT6510

3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 10MM(L)

1

BOES511

3i T3 PARALLEL WALLED IMPLANT, 5MM(D) X 11.5MM(L)

7

BOPT6511

3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 11.5MM(L)

1

BOES513

3i T3 PARALLEL WALLED IMPLANT, 5MM(D) X 13MM(L)

7

BOPT6513

3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 13MM(L)

1

BOES515

3i T3 PARALLEL WALLED IMPLANT, 5MM(D) X 15MM(L)

7

BOPT6515

3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 15MM(L)

1

BOES518

3i T3 PARALLEL WALLED IMPLANT, 5MM(D) X 18MM(L)

7

BOPT6585

3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 8.5MM(L)

1

BOES665

3i T3 PARALLEL WALLED IMPLANT, 6MM(D) X 6.5MM(L)

7

BOSS310

2

BOES685

3i T3 PARALLEL WALLED IMPLANT, 6MM(D) X 8.5MM(L)

7

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
3.25MM(D) X 10MM(L)

BOES610

3i T3 PARALLEL WALLED IMPLANT, 6MM(D) X 10MM(L)

7

BOSS311

3i T3 PARALLEL WALLED IMPLANT, 6MM(D) X 11.5MM(L)

7

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
3.25MM(D) X 11.5MM(L)

2

BOES611
BOES613

3i T3 PARALLEL WALLED IMPLANT, 6MM(D) X 13MM(L)

7

BOSS313

2

BOES615

3i T3 PARALLEL WALLED IMPLANT, 6MM(D) X 15MM(L)

7

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
3.25MM(D) X 13MM(L)

BOES618

3i T3 PARALLEL WALLED IMPLANT, 6SMM(D) X 18MM(L)

7

BOSS315

3i T3 TAPERED IMPLANT, 3.25MM(D) X 8.5MM(L)

7

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
3.25MM(D) X 15MM(L)

2

BOET3285
BOET3210

3i T3 TAPERED IMPLANT, 3.25MM(D) X 10MM(L)

7

BOSS318

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
3.25MM(D) X 18MM(L)

2

BOET3211

3i T3 TAPERED IMPLANT, 3.25MM(D) X 11.5MM(L)

7

BOSS385

3i T3 TAPERED IMPLANT, 3.25MM(D) X 13MM(L)

7

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
3.25MM(D) X 8.5MM(L)

2

BOET3213
BOET3215

3i T3 TAPERED IMPLANT, 3.25MM(D) X 15MM(L)

7

BOSS410

3i T3 TAPERED IMPLANT, 4MM(D) X 8.5MM(L)

7

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
4MM(D) X 10MM(L)

2

BOET485
BOET410

3i T3 TAPERED IMPLANT, 4MM(D) X 10MM(L)

7

53

Index
Item#

Description

BOSS411

3i T3® NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
4MM(D) X 11.5MM(L)

2

BOSS413

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
4MM(D) X 13MM(L)

2

BOSS415

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
4MM(D) X 15MM(L)

2

BOSS418

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
4MM(D) X 18MM(L)

2

BOSS485

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
4MM(D) X 8.5MM(L)

2

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
5MM(D) X 10MM(L)

2

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
5MM(D) X 11.5MM(L)

2

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
5MM(D) X 13MM(L)

2

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
5MM(D) X 15MM(L)

2

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
5MM(D) X 8.5MM(L)

2

BOSS510
BOSS511
BOSS513
BOSS515
BOSS585
BOSS610

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
6MM(D) X 10MM(L)

Page#

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
6MM(D) X 11.5MM(L)

2

BOSS613

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
6MM(D) X 13MM(L)

2

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
6MM(D) X 15MM(L)

2

BOSS685

3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT,
6MM(D) X 8.5MM(L)

BOST3210
BOST3211
BOST3213

Description

Page#

BP560

BONE PROFILER W/GUIDE PIN, 5MM(D) X 6MM(P)

BP575

BONE PROFILER W/GUIDE PIN, 5MM(D) X 7.5MM(P)

36
36

BP660

BONE PROFILER W/GUIDE PIN, 6MM(D) X 6MM(P)

36

BP675

BONE PROFILER W/GUIDE PIN, 6MM(D) X 7.5MM(P)

36

BPAKT

BONE PROFILER KIT, 5 & 6MM(D)

36

BPAKTB

BONE PROFILER ORGANIZER BOX, 5 & 6MM(D)

36

BPGUIDE

BONE PROFILER GUIDE PIN, 4.1, 5 & 6MM(D)

36

BPKIT

BONE PROFILER KIT, 4.1MM(D)

36

BPKITB

BONE PROFILER ORGANIZER BOX, 4.1MM(D)

36

C202-750

OSSEOCISION® TUBE CLAMP

20

C293-025

OSSEOCISION INTERNAL IRRIGATION TUBE

20

C823-752

OSSEOCISION Y-CONNECTOR

20

CD100

COUNTERSINK REUSABLE DRILL, 4.1MM EXTERNAL CONNECTION 32,33,35

CD4500

COUNTERSINK REUSABLE DRILL, 4/5, 4/5/4MM

31,33,35

CD500

COUNTERSINK/PILOT REUSABLE DRILL, 5MM

31,33,35

CD5600

COUNTERSINK/PILOT REUSABLE DRILL, 5/6, 5/4/5MM

31,33,35

CD600

COUNTERSINK/PILOT REUSABLE DRILL, 4.25–5.25MM

32,33,35

CS275

HEADLESS COVER SCREW, 4.1, 5, 6MM(D)

7,8,9,10

CS375

IMPLANT COVER SCREW, 4.1MM(D) X 1MM(H)

7,8,9,10

2

BOSS611

BOSS615

Item#

CS500

IMPLANT COVER SCREW, 5MM(D) X 1MM(H)

7,8,9,10

CS600

IMPLANT COVER SCREW, 6MM(D) X 1MM(H)

7,8,9,10

CW100

OPEN END WRENCH

DC100

COUNTERSINK DISPOSABLE DRILL, 4.1MM EXTERNAL CONNECTION

22,26,29,32,34,39
35

DC500

PILOT/COUNTERSINK DISPOSABLE DRILL, 5MM

35

DC600

PILOT/COUNTERSINK DISPOSABLE DRILL, 6MM

35

DIEM2-4UNIT PATIENT ED MODEL - DIEM®2 (4-UNIT)

48

2

DIEM2-6UNIT PATIENT ED MODEL - DIEM 2 (6-UNIT)

48

DI100

DIRECTION INDICATOR, 2MM(D) X 10MM(L), 3EA.

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT,
3.25MM(D) X 10MM(L)

1

DI200

DIRECTION INDICATOR, 2MM(D) X 15MM(L)

38

DI2310

DIRECTION INDICATOR, 2.3MM(D) X 10MM(L)

38

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT,
3.25MM(D) X 11.5MM(L)

1

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT,
3.25MM(D) X 13MM(L)

DI2315

DIRECTION INDICATOR, 2.3MM(D) X 15MM(L)

DP020

IMPLANT DEPTH GAUGE, 20MM(L)

30,32,34,38

38
29,32,34,39

1

BOST3215

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT,
3.25MM(D) X 15MM(L)

1

BOST3285

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT,
3.25MM(D) X 8.5MM(L)

1

BOST410

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 4MM(D) X 10MM(L) 1

DP100

DISPOSABLE PILOT DRILL, 2-3MM

35

DR100

DISPOSABLE ROUND BUR

35

DS100J

OSSEOCISION SURGICAL DRILL SYSTEM (100V) W/HANDPIECE

20

DS100RW

OSSEOCISION SURGICAL DRILL SYSTEM (230V) W/HANDPIECE

20

DS100US

OSSEOCISION SURGICAL DRILL SYSTEM (120V) W/HANDPIECE

DU1000US DU1000 SURGICAL DRILLING UNIT, 115 VOLT (USA)

20
19

BOST411

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 4MM(D) X 11.5MM(L) 1

DU1000EU

DU1000 SURGICAL DRILLING UNIT, 230 VOLT (EUROPE)

19

BOST413

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 4MM(D) X 13MM(L) 1

DU1KFC

DU1000 FOOT CONTROL

19

BOST415

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 4MM(D) X 15MM(L) 1

DU1KH1

DU1000 HANDLE FOR FOOT CONTROL

19

BOST485

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 4MM(D) X 8.5MM(L) 1

DU1KHS

DU1000 MOTOR/HANDPIECE SUPPORT

19

BOST510

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 5MM(D) X 10MM(L) 1

DU1KIT

DU1000 DISPOSABLE IRRIGATION TUBING SET (6-PIECE)

19

BOST511

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 5MM(D) X 11.5MM(L) 1

DU1KMC

DU1000 MICROMOTOR WITH CABLE

19

BOST513

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 5MM(D) X 13MM(L) 1

DU1KPCCH DU1000 ELECTRICAL POWER CORD (SWITZERLAND)

19

BOST515

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 5MM(D) X 15MM(L) 1

DU1KPCDK DU1000 ELECTRICAL POWER CORD (DENMARK)

19

BOST585

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 5MM(D) X 8.5MM(L) 1

DU9BG

DU1000 BUR TESTING GAUGE

19

BOST610

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 6MM(D) X 10MM(L) 1

DU9CL

DU1000 IRRIGATION TUBE CLAMPS (5-PACK)

19

BOST611

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 6MM(D) X 11.5MM(L) 1

DU9F

DU1000 CIRCUIT FUSE

19

BOST613

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 6MM(D) X 13MM(L) 1

DU9IBS

DU1000 IRRIGATION BAG STAND

19

BOST615

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 6MM(D) X 15MM(L) 1

DU9LP

DU1000 LOCKING PIN

19

BOST685

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 6MM(D) X 8.5MM(L) 1

DU9NC

DU1000 NOZZLE CLEANER

19

BP340

BONE PROFILER W/GUIDE PIN, 3.4MM(D) X 3.8MM(P)

36

DU9PCAU

DU1000 ELECTRICAL POWER CORD (AUSTRALIA, NEW ZEALAND)

19

BP450

BONE PROFILER W/GUIDE PIN, 4.1MM(D) X 5MM(P)

36

DU9PCEU

DU1000 ELECTRICAL POWER CORD (EUROPE)

19

BP460

BONE PROFILER W/GUIDE PIN, 4.1MM(D) X 6MM(P)

36

DU9PCUK

DU1000 ELECTRICAL POWER CORD (UNITED KINGDOM, IRELAND)

19

BP475

BONE PROFILER W/GUIDE PIN, 4.1MM(D) X 7.5MM(P)

36

DU9SC

DU1000 SPRAY CAP WITH NOZZLE

19

BP550

BONE PROFILER W/GUIDE PIN, 5MM(D) X 5MM(P)

36

DU9SP

DU1000 MOTOR PROTECTIVE COVER

19

54

Index
Item#

Description

Page#

Item#

Description

DU9WI75L
DU9WS75

DU1000 20:1 HANDPIECE

19

EHA566

19

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 6MM(P) X 6MM(H)

15

DU1000 20:1 HANDPIECE

DU9YC

DU1000 Y-CONNECTOR (3-PACK)

19

EHA568

DU1000 ELECTRICAL POWER CORD (USA, CANADA, JAPAN)

19

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 6MM(P) X 8MM(H)

15

DU9PCUS
E211-001

OSSEOCISION® MICROMOTOR W/CORD

20

EHA663

15

E211-051

OSSEOCISION MOTOR CORD

20

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
6MM(D) X 6MM(P) X 3MM(H)

E211-701

OSSEOCISION AUTOCLAVE PLUG FOR MOTOR

20

EHA664

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
6MM(D) X 6MM(P) X 4MM(H)

15

EHA343

BELLATEK® ENCODE® 2-PC HEALING ABUTMENT,
3.4MM(D) X 3.8MM(P) X 3MM(H)

15

EHA666

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
6MM(D) X 6MM(P) X 6MM(H)

15

EHA344

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
3.4MM(D) X 3.8MM(P) X 4MM(H)

15

EHA668

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
6MM(D) X 6MM(P) X 8MM(H)

15

EHA346

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
3.4MM(D) X 3.8MM(P) X 6MM(H)

15

EHA348
EHA353
EHA354
EHA356
EHA358
EHA443
EHA444
EHA446
EHA448

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
3.4MM(D) X 3.8MM(P) X 8MM(H)

15

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
3.4MM(P) X 5MM(P) X 3MM(H)

15

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
3.4MM(P) X 5MM(P) X 4MM(H)

15

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
3.4MM(P) X 5MM(P) X 6MM(H)

15

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
3.4MM(P) X 5MM(P) X 8MM(H)

15

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 4.1MM(P) X 3MM(H)

15

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 4.1MM(P) X 4MM(H)

15

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 4.1MM(P) X 6MM(H)

15

EHA453

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 5MM(P) X 3MM(H)

15

EHA454

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 5MM(P) X 4MM(H)

15

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 5MM(P) X 6MM(H)

15

EHA458

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 5MM(P) X 8MM(H)

15

EHA463

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 6MM(P) X 3MM(H)

15

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 6MM(P) X 4MM(H)

15

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 6MM(P) X 6MM(H)

15

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 6MM(P) X 8MM(H)

15

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 5MM(P) X 3MM(H)

15

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 5MM(P) X 4MM(H)

15

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 5MM(P) X 6MM(H)

15

EHA456

EHA464
EHA466
EHA468
EHA553
EHA554
EHA556
EHA558
EHA563
EHA564

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 5MM(P) X 8MM(H)
BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 6MM(P) X 3MM(H)
BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 6MM(P) X 4MM(H)

EXHEXMOD PATIENT ED MODEL - OSSEOTITE® IMPLANT

15

BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 4.1MM(P) X 8MM(H)

Page#

48

FNT3210

FULL OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 10MM(L)

7

FNT3211

FULL OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 11.5MM(L)

7

FNT3213

FULL OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 13MM(L)

7

FNT3215

FULL OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 15MM(L)

7

FNT3285

FULL OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 8.5MM(L)

7

FNT410

FULL OSSEOTITE TAPERED IMPLANT, 4MM(D) X 10MM(L)

7

FNT411

FULL OSSEOTITE TAPERED IMPLANT, 4MM(D) X 11.5MM(L)

7

FNT413

FULL OSSEOTITE TAPERED IMPLANT, 4MM(D) X 13MM(L)

7

FNT415

FULL OSSEOTITE TAPERED IMPLANT, 4MM(D) X 15MM(L)

7

FNT485

FULL OSSEOTITE TAPERED IMPLANT, 4MM(D) X 8.5MM(L)

7

FNT510

FULL OSSEOTITE TAPERED IMPLANT, 5MM(D) X 10MM(L)

7

FNT511

FULL OSSEOTITE TAPERED IMPLANT, 5MM(D) X 11.5MM(L)

7

FNT513

FULL OSSEOTITE TAPERED IMPLANT, 5MM(D) X 13MM(L)

7

FNT515

FULL OSSEOTITE TAPERED IMPLANT, 5MM(D) X 15MM(L)

7

FNT585

FULL OSSEOTITE TAPERED IMPLANT, 5MM(D) X 8.5MM(L)

7

FNT610

FULL OSSEOTITE TAPERED IMPLANT, 6MM(D) X 10MM(L)

7

FNT611

FULL OSSEOTITE TAPERED IMPLANT, 6MM(D) X 11.5MM(L)

7

FNT613

FULL OSSEOTITE TAPERED IMPLANT, 6MM(D) X 13MM(L)

7

FNT615

FULL OSSEOTITE TAPERED IMPLANT, 6MM(D) X 15MM(L)

7

FNT685

FULL OSSEOTITE TAPERED IMPLANT, 6MM(D) X 8.5MM(L)

FOS307

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 7MM(L)

FOS310

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 10MM(L) 10

7
10

FOS311

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 11.5MM(L) 10

FOS313

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 13MM(L) 10

FOS315

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 15MM(L) 10

FOS385

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 8.5MM(L) 10

FOS407

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 7MM(L)

10

FOS410

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 10MM(L)

10

FOS411

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L)

10

FOS413

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 13MM(L)

10

FOS415

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 15MM(L)

10

FOS485

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 8.5MM(L)

10

FOS507

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 7MM(L)

10

FOS510

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 10MM(L)

10

FOS511

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 11.5MM(L)

10

FOS513

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 13MM(L)

10

FOS515

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 15MM(L)

10

FOS585

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 8.5MM(L)

10

15
15
15

55

FOS607

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 7MM(L)

10

FOS610

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 10MM(L)

10

FOS611

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 11.5MM(L)

10

FOS613

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 13MM(L)

10

FOS615

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 15MM(L)

10

FOS685

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 8.5MM(L)

10

Index
Item#

Description

Page#

FOSM307

FULL OSSEOTITE® PARALLEL WALLED IMPLANT, 3.25MM(D) X 7MM(L) 10

FOSM310

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 10MM(L) 10

FOSM311

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L) 10

FOSM313

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 13MM(L) 10

FOSM315

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 15MM(L) 10

FOSM385

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 8.5MM(L) 10

H-TIRW

HIGH TORQUE INDICATING RATCHET WRENCH

IBPGP

CERTAIN® PROFILER GUIDE PIN (3-PACK), 4.1, 5 & 6MM(D)

36

IBPMGP

CERTAIN BONE PROFILER GUIDE PIN (3-PACK), 3.25MM(D)

36

39

IC015

IMPLANT MOUNT, 15MM(L)

39

IC100

SURGICAL INDEX COPING

40

ICD100

CERTAIN COUNTERSINK DRILL, 4MM(D)

ICDI100

COUNTERSINK DEPTH INDICATOR FOR ICD100

32,35

ICS375

CERTAIN IMPLANT COVER SCREW, 4.1MM(D) X 1MM(H)

1,2,3,4,5,6

CERTAIN IMPLANT COVER SCREW, 5MM(D) X 1MM(H)

1,2,3,4,5,6

ICS600

CERTAIN IMPLANT COVER SCREW, 6MM(D) X 1MM(H)

ICSF41

CERTAIN FLAT IMPLANT COVER SCREW, 4.1MM(D)

1,2,3,4,5,6

ICSF50

CERTAIN FLAT IMPLANT COVER SCREW, 5MM(D)

1,2,3,4,5,6

ICSF60

CERTAIN FLAT IMPLANT COVER SCREW, 6MM(D)

1,2

IDI001

CERTAIN DIRECTION INDICATOR, 10MM(L)

38

1,2,3,5,6

IDIKT

CERTAIN DIRECTION INDICATOR KIT

38

IDIM01

CERTAIN DIRECTION INDICATOR, 3.25MM(D) X 10MM(L)

38

IEHA343

CERTAIN BELLATEK® ENCODE® 2-PC HEALING ABUTMENT,
3.4MM(D) X 3.8MM(P) X 3MM(H)

12

IEHA344

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
3.4MM(D) X 3.8MM(P) X 4MM(H)

12

IEHA346

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
3.4MM(D) X 3.8MM(P) X 6MM(H)

12

IEHA348

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
3.4MM(D) X 3.8MM(P) X 8MM(H)

12

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
3.4MM(D) X 5MM(P) X 3MM(H)

12

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
3.4MM(D) X 5MM(P) X 4MM(H)

12

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
3.4MM(D) X 5MM(P) X 6MM(H)

12

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
3.4MM(D) X 5MM(P) X 8MM(H)

12

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 4.1MM(P) X 3MM(H)

12

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 4.1MM(P) X4MM(H)

12

IEHA354
IEHA356
IEHA358
IEHA443
IEHA444
IEHA446

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 4.1MM(P) X 6MM(H)

Description

IEHA468

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 6MM(P) X 8MM(H)

12

IEHA553

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 5MM(P) X 3MM(H)

12

IEHA554

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 5MM(P) X 4MM(H)

12

IEHA556

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 5MM(P) X 6MM(H)

12

IEHA558

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 5MM(P) X 8MM(H)

12

IEHA563

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 6MM(P) X 3MM(H)

12

IEHA564

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 6MM(P) X 4MM(H)

12

IEHA566

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 6MM(P) X 6MM(H)

12

IEHA568

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
5MM(D) X 6MM(P) X 8MM(H)

12

IEHA663

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
6MM(D) X 6MM(P) X 3MM(H)

12

IEHA664

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
6MM(D) X 6MM(P) X 4MM(H)

12

IEHA666

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
6MM(D) X 6MM(P) X 6MM(H)

12

IEHA668

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
6MM(D) X 6MM(P) X 8MM(H)

12

32

ICS500

IEHA353

Item#

12

Page#

IIPDTL

CERTAIN IMPLANT PLACEMENT DRIVER (LONG), 4.1, 5, 6MM(D)

30,32,40

IIPDTS

CERTAIN IMPLANT PLACEMENT DRIVER (SHORT), 4.1, 5, 6MM(D)

30,32,40

ILPCMBP3

CERTAIN LOW PROFILE ABUTMENT MANUAL BONE PROFILER, 3.4MM(D) 36

ILPCMBP4

CERTAIN LOW PROFILE ABUTMENT MANUAL BONE PROFILER, 4.1MM(D) 36

ILPCMBP5

CERTAIN LOW PROFILE ABUTMENT MANUAL BONE PROFILER, 5MM(D) 36

IMBP4

CERTAIN MANUAL BONE PROFILER, 4.1MM(D) X 5MM(P)

22,26,36

IMBP5

CERTAIN MANUAL BONE PROFILER, 5MM(D) X 6MM(P)

22,26,36

IMCSF34

CERTAIN FLAT IMPLANT COVER SCREW, 3.4MM(D)

IMHA32

CERTAIN EP® 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 2MM(H) 13

1,2,3,4,5,6

IMHA33

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 3MM(H) 13

IMHA34

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 4MM(H) 13

IMHA36

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 6MM(H) 13

IMHA352

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 5MM(P) X 2MM(H) 13

IMHA353

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 5MM(P) X 3MM(H) 13

IMHA354

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 5MM(P) X 4MM(H) 13

IMHA356

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 5MM(P) X 6MM(H) 13

IMMBP

CERTAIN MANUAL BONE PROFILER, 3.4MM(D) X 4.1MM(P)

IMMBP35

CERTAIN MANUAL BONE PROFILER, 3.4MM(D) X 5MM(P)

IMMCS1

CERTAIN COVER SCREW, 3.4MM(D) X 1MM(H)

22,26,36
36
1,2,3,4,5,6

IEHA448

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 4.1MM(P) X 8MM(H)

12

IMPDTL

CERTAIN IMPLANT PLACEMENT DRIVER TIP, 3.4MM(D) LONG

30,32,40

IEHA453

BELLATEK CERTAIN ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 5MM(P) X 3MM(H)

12

IMPDTS

CERTAIN IMPLANT PLACEMENT DRIVER TIP, 3.4MM(D) SHORT

30,32,40

IRE100U

CERTAIN UNIVERSAL RATCHET EXTENSION, 6MM(L) SHORT

30,32,39

IEHA454

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 5MM(P) X 4MM(H)

12

IRE200U

CERTAIN UNIVERSAL RATCHET EXTENSION, 15MM(L) LONG

30,32,39

IRORDR

CERTAIN DRIVER REPLACEMENT O-RINGS, QTY:10

30,32,40

IEHA456

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 5MM(P) X 6MM(H)

12

ISHA42

CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 2MM(H) 13

ISHA43

CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 3MM(H) 13

IEHA458

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 5MM(P) X 8MM(H)

12

ISHA44

CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 4MM(H) 13

IEHA463

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 6MM(P) X 3MM(H)

12

IEHA464

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 6MM(P) X 4MM(H)

12

CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT,
4.1MM(D) X 6MM(P) X 6MM(H)

12

IEHA466

56

ISHA46

CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 6MM(H) 13

ISHA48

CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 8MM(H) 13

ISMHA32

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.4MM(P) X 2MM(H) 13

ISMHA33

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.4MM(P) X 3MM(H) 13

ISMHA34

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.4MM(P) X 4MM(H) 13

ISMHA36

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.4MM(P) X 6MM(H) 13

Index
Item#

Description

Page#

ISWHA52

CERTAIN® EP® 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 2MM(H) 14

MSGIIML

NAVIGATOR CERTAIN IMPLANT MOUNT, 3.4MM(D) - LONG

22

ISWHA53

CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 3MM(H)

14

MSGIIMS

NAVIGATOR CERTAIN IMPLANT MOUNT, 3.4MM(D) - SHORT

22

ISWHA54

CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 4MM(H)

14

MSGIIM1

NAVIGATOR CERTAIN IMPLANT MOUNT, 3.4MM(D) X 1(L)

26

ISWHA56

CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 6MM(H)

14

MSGIIM2

NAVIGATOR CERTAIN IMPLANT MOUNT, 3.4MM(D) X 2(L)

26

ISWHA58

CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 8MM(H)

14

MSGIIM3

NAVIGATOR CERTAIN IMPLANT MOUNT, 3.4MM(D) X 3(L)

26

ISWHA62

CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 2MM(H)

14

MSGIIM4

NAVIGATOR CERTAIN IMPLANT MOUNT, 3.4MM(D) X 4(L)

26

ISWHA63

CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 3MM(H)

14

MSGSD

NAVIGATOR STARTER DRILL, 3.4MM(D)

25

ISWHA64

CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 4MM(H)

14

MSGTAP

NAVIGATOR BONE TAP, 3.25MM(D)

26

ISWHA66

CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 6MM(H)

14

MSGTCDL

TAPERED NAVIGATOR COUNTERSINK DRILL, 3.4MM(D) - LONG

21

ISWHA68

CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 8MM(H)

14

MSGTCDS

TAPERED NAVIGATOR COUNTERSINK DRILL, 3.4MM(D) - SHORT

21

13

MSGTD10L TAPERED NAVIGATOR SHAPING DRILL,
3.25MM(D) X 10MM(L) - LONG

22

MSGTD10S TAPERED NAVIGATOR SHAPING DRILL,
3.25MM(D) X 10MM(L) - SHORT

21

MSGTD11L TAPERED NAVIGATOR SHAPING DRILL,
3.25MM(D) X 11.5MM(L) - LONG

22

MSGTD11S TAPERED NAVIGATOR SHAPING DRILL,
3.25MM(D) X 11.5MM(L) - SHORT

21

MSGTD13L TAPERED NAVIGATOR SHAPING DRILL,
3.25MM(D) X 13MM(L) - LONG

22

MSGTD13S TAPERED NAVIGATOR SHAPING DRILL,
3.25MM(D) X 13MM(L) - SHORT

21

MSGTD15L TAPERED NAVIGATOR SHAPING DRILL,
3.25MM(D) X 15MM(L) - LONG

22

MSGTD15S TAPERED NAVIGATOR SHAPING DRILL,
3.25MM(D) X 15MM(L) - SHORT

21

MSGTD85L TAPERED NAVIGATOR SHAPING DRILL,
3.25MM(D) X 8.5MM(L) - LONG

22

MSGTD85S TAPERED NAVIGATOR SHAPING DRILL,
3.25MM(D) X 8.5MM(L) - SHORT

21

ITHA52

CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 2MM(H)

ITHA53

CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 3MM(H) 13

ITHA54

CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 4MM(H) 13

ITHA56

CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 6MM(H) 13

ITHA58

CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 8MM(H) 13

ITHA63

CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 3MM(H) 13

ITHA64

CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 4MM(H) 13

ITHA66

CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 6MM(H) 13

ITHA68

CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 8MM(H) 13

IWTH52

CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 2MM(H)

14

IWTH53

CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 3MM(H)

14

IWTH54

CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 4MM(H)

14

IWTH56

CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 6MM(H)

14

IWTH562

CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 6MM(P) X 2MM(H)

14

IWTH563

CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 6MM(P) X 3MM(H)

14

IWTH564

CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 6MM(P) X 4MM(H)

14

IWTH566

CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 6MM(P) X 6MM(H)

14

IWTH568

CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 6MM(P) X 8MM(H)

14

IWTH58

CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 8MM(H)

14

IWTH62

CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 2MM(H)

14

IWTH63

CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 3MM(H)

14

IWTH64

CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 4MM(H)

14

IWTH66

CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 6MM(H)

14

IWTH68

CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 8MM(H)

14

LPCBP3

LOW PROFILE ABUTMENT BONE PROFILER, 3.4MM(D)

36

LPCBP4

LOW PROFILE ABUTMENT BONE PROFILER, 4.1MM(D)

36

LPCBP5

LOW PROFILE ABUTMENT BONE PROFILER, 5MM(D)

36

MALL1

MALLET, STAINLESS STEEL

39

MDR10

HANDPIECE CONNECTOR

ME100

SMALL MEMBRANE ELEVATOR

Item#

Description

Page#

MSGTT10L TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 10(L) - LONG

23

MSGTT10S TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 10(L) - SHORT

23

MSGTT11L TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 11.5(L) - LONG

23

MSGTT11S TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 11.5(L) - SHORT

23

MSGTT13L TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 13(L) - LONG

23

MSGTT13S TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 13(L) - SHORT

23

MSGTT15L TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 15(L) - LONG

23

MSGTT15S TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 15(L) - SHORT

23

MSGTT85L TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 8.5(L) - LONG

23

MSGTT85S TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 8.5(L) - SHORT

23

22,26,30,32,34,40

ME200

MEDIUM MEMBRANE ELEVATOR

42

ME300

LARGE MEMBRANE ELEVATOR

42

MHA32

EP 1-PIECE HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 2MM(H)

16

MHA33

EP 1-PIECE HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 3MM(H)

16

MHA34

EP 1-PIECE HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 4MM(H)

16

MHA36

EP 1-PIECE HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 6MM(H)

16

MIDTH

MANUAL INTERCHANGEABLE DRIVER TIP HANDLE

39

MMC03

IMPLANT MOUNT, 3.4MM(D) X 3MM(L)

38

MMC15

IMPLANT MOUNT, 3.4MM(D) X 15MM(L)

MMCS1

IMPLANT COVER SCREW, 3.4MM(D) X 1MM(H)

MMKIT

IMPLANT MOUNT KIT, 3.4MM(D)
®

MTAP1

DENSE BONE TAP FOR PARALLEL WALLED IMPLANTS, 3.25MM(D) - SHORT 37

MTAP2

DENSE BONE TAP FOR PARALLEL WALLED IMPLANTS, 3.25MM(D) - LONG 32,33,37

NIITP4310

NANOTITE™ TAPERED CERTAIN PREVAIL® IMPLANT,
4MM(D) X 3MM(P) X 10MM(L)

3

NIITP4311

NANOTITE TAPERED CERTAIN PREVAIL IMPLANT,
4MM(D) X 3MM(P) X 11.5MM(L)

3

NIITP4313

NANOTITE TAPERED CERTAIN PREVAIL IMPLANT,
4MM(D) X 3MM(P) X 13MM(L)

3

NIITP4315

NANOTITE TAPERED CERTAIN PREVAIL IMPLANT,
4MM(D) X 3MM(P) X 15MM(L)

3

NIITP4385

NANOTITE TAPERED CERTAIN PREVAIL IMPLANT,
4MM(D) X 3MM(P) X 8.5MM(L)

3

NIITP5410

NANOTITE TAPERED CERTAIN PREVAIL IMPLANT,
5MM(D) X 4MM(P) X 10MM(L)

3

NIITP5411

NANOTITE TAPERED CERTAIN PREVAIL IMPLANT,
5MM(D) X 4MM(P) X 11.5MM(L)

3

NIITP5413

NANOTITE TAPERED CERTAIN PREVAIL IMPLANT,
5MM(D) X 4MM(P) X 13MM(L)

3

NIITP5415

NANOTITE TAPERED CERTAIN PREVAIL IMPLANT,
5MM(D) X 4MM(P) X 15MM(L)

3

42

30,32,34,38
7,8,9,10
38

MSGIAM1

NAVIGATOR CERTAIN ANALOG MOUNT, 3.4MM(D) X 1(L)

27

MSGIAM2

NAVIGATOR CERTAIN ANALOG MOUNT, 3.4MM(D) X 2(L)

27

MSGIAM3

NAVIGATOR CERTAIN ANALOG MOUNT, 3.4MM(D) X 3(L)

27

MSGIAM4

NAVIGATOR CERTAIN ANALOG MOUNT, 3.4MM(D) X 4(L)

27

MSGIAML

NAVIGATOR CERTAIN ANALOG MOUNT, 3.4MM(D) - LONG

24

MSGIAMS

NAVIGATOR CERTAIN ANALOG MOUNT, 3.4MM(D) - SHORT

24

57

Index
Item#

Description

Page#

NIITP5485

NANOTITE™ TAPERED CERTAIN® PREVAIL® IMPLANT,
5MM(D) X 4MM(P) X 8.5MM(L)

3

NIOSM318 NANOTITE PARALLEL WALLED CERTAIN IMPLANT,
3.25MM(D) X 18MM(L)

5

NIITP6510

NANOTITE TAPERED CERTAIN PREVAIL IMPLANT,
6MM(D) X 5MM(P) X 10MM(L)

3

NIOSM385 NANOTITE PARALLEL WALLED CERTAIN IMPLANT,
3.25MM(D) X 8.5MM(L)

5

NIITP6511

NANOTITE TAPERED CERTAIN PREVAIL IMPLANT,
6MM(D) X 5MM(P) X 11.5MM(L)

3

NIOSS410

NANOTITE PARALLEL WALLED CERTAIN IMPLANT,
4MM(D) X 10MM(L)

5

NIITP6513

NANOTITE TAPERED CERTAIN PREVAIL IMPLANT,
6MM(D) X 5MM(P) X 13MM(L)

3

NIOSS411

NANOTITE PARALLEL WALLED CERTAIN IMPLANT,
4MM(D) X 11.5MM(L)

5

NIITP6515

NANOTITE TAPERED CERTAIN PREVAIL IMPLANT,
6MM(D) X 5MM(P) X 15MM(L)

3

NIOSS413

NANOTITE PARALLEL WALLED CERTAIN IMPLANT,
4MM(D) X 13MM(L)

5

NIITP6585

NANOTITE TAPERED CERTAIN PREVAIL IMPLANT,
6MM(D) X 5MM(P) X 8.5MM(L)

3

NIOSS415

NANOTITE PARALLEL WALLED CERTAIN IMPLANT,
4MM(D) X 15MM(L)

5

NINT3210

NANOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 10MM(L)

3

NIOSS418

NANOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 11.5MM(L)

3

NANOTITE PARALLEL WALLED CERTAIN IMPLANT,
4MM(D) X 18MM(L)

5

NINT3211
NINT3213

NANOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 13MM(L)

3

NIOSS485

5

NINT3215

NANOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 15MM(L)

3

NANOTITE PARALLEL WALLED CERTAIN IMPLANT,
4MM(D) X 8.5MM(L)

NINT3285

NANOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 8.5MM(L)

3

NIOSS510

NANOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 10MM(L)

3

NANOTITE PARALLEL WALLED CERTAIN IMPLANT,
5MM(D) X 10MM(L)

5

NINT410
NINT411

NANOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 11.5MM(L)

3

NIOSS511

NANOTITE PARALLEL WALLED CERTAIN IMPLANT,
5MM(D) X 11.5MM(L)

5

NINT413

NANOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 13MM(L)

3

NIOSS513

NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5MM(D) X 13MM(L)

5

NINT415

NANOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 15MM(L)

3

NIOSS515

NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5MM(D) X 15MM(L)

5

NINT485

NANOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 8.5MM(L)

3

NIOSS585

NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5MM(D) X 8.5MM(L)

5

NINT510

NANOTITE TAPERED CERTAIN IMPLANT, 5MM(D) X 10MM(L)

3

NIOSS610

NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 6MM(D) X 10MM(L)

5

NINT511

NANOTITE TAPERED CERTAIN IMPLANT, 5MM(D) X 11.5MM(L)

3

NIOSS611

NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 6MM(D) X 11.5MM(L) 5

NINT513

NANOTITE TAPERED CERTAIN IMPLANT, 5MM(D) X 13MM(L)

3

NIOSS613

NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 6MM(D) X 13MM(L)

NINT515

NANOTITE TAPERED CERTAIN IMPLANT, 5MM(D) X 15MM(L)

3

NIOSS615

NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 6MM(D) X 15MM(L)

5

NINT585

NANOTITE TAPERED CERTAIN IMPLANT, 5MM(D) X 8.5MM(L)

3

NNT3210

NANOTITE TAPERED IMPLANT, 3.25MM(D) X 10MM(L)

7

NINT610

NANOTITE TAPERED CERTAIN IMPLANT, 6MM(D) X 10MM(L)

3

NINT611

NANOTITE TAPERED CERTAIN IMPLANT, 6MM(D) X 11.5MM(L)

3

NINT613

NANOTITE TAPERED CERTAIN IMPLANT, 6MM(D) X 13MM(L)

3

NINT615

NANOTITE TAPERED CERTAIN IMPLANT, 6MM(D) X 15MM(L)

3

NINT685

NANOTITE TAPERED CERTAIN IMPLANT, 6MM(D) X 8.5MM(L)

3

NIIOS4310 NANOTITE CERTAIN PREVAIL IMPLANT,
4MM(D) X 3.4MM(C) X 10MM(L)

4

NIIOS4311 NANOTITE CERTAIN PREVAIL IMPLANT,
4MM(D) X 3.4MM(C) X 11.5MM(L)

4

NIIOS4313 NANOTITE CERTAIN PREVAIL IMPLANT,
4MM(D) X 3.4MM(C) X 13MM(L)

4

NIIOS4315 NANOTITE CERTAIN PREVAIL IMPLANT,
4MM(D) X 3.4MM(C) X 15MM(L)

4

NIIOS4385 NANOTITE CERTAIN PREVAIL IMPLANT,
4MM(D) X 3.4MM(C) X 8.5MM(L)

4

NIIOS5485 NANOTITE CERTAIN PREVAIL IMPLANT,
5MM(D) X 4.1MM(P) X 8.5MM(L)

4

NIIOS5410 NANOTITE CERTAIN PREVAIL IMPLANT,
5MM(D) X 4.1MM(P) X 10MM(L)

4

NIIOS5411 NANOTITE CERTAIN PREVAIL IMPLANT,
5MM(D) X 4.1MM(P) X 11MM(L)

4

Item#

Description

Page#

5

NNT3211

NANOTITE TAPERED IMPLANT, 3.25MM(D) X 11.5MM(L)

7

NNT3213

NANOTITE TAPERED IMPLANT, 3.25MM(D) X 13MM(L)

7

NNT3215

NANOTITE TAPERED IMPLANT, 3.25MM(D) X 15MM(L)

7

NNT3285

NANOTITE TAPERED IMPLANT, 3.25MM(D) X 8.5MM(L)

7

NNT410

NANOTITE TAPERED IMPLANT, 4MM(D) X 10MM(L)

7

NNT411

NANOTITE TAPERED IMPLANT, 4MM(D) X 11.5MM(L)

7

NNT413

NANOTITE TAPERED IMPLANT, 4MM(D) X 13MM(L)

7

NNT415

NANOTITE TAPERED IMPLANT, 4MM(D) X 15MM(L)

7

NNT485

NANOTITE TAPERED IMPLANT, 4MM(D) X 8.5MM(L)

7

NNT510

NANOTITE TAPERED IMPLANT, 5MM(D) X 10MM(L)

7

NNT511

NANOTITE TAPERED IMPLANT, 5MM(D) X 11.5MM(L)

7

NNT513

NANOTITE TAPERED IMPLANT, 5MM(D) X 13MM(L)

7

NNT515

NANOTITE TAPERED IMPLANT, 5MM(D) X 15MM(L)

7

NNT585

NANOTITE TAPERED IMPLANT, 5MM(D) X 8.5MM(L)

7

NNT610

NANOTITE TAPERED IMPLANT, 6MM(D) X 10MM(L)

7

NNT611

NANOTITE TAPERED IMPLANT, 6MM(D) X 11.5MM(L)

7

NNT613

NANOTITE TAPERED IMPLANT, 6MM(D) X 13MM(L)

7

NNT615

NANOTITE TAPERED IMPLANT, 6MM(D) X 15MM(L)

7

NNT685

NANOTITE TAPERED IMPLANT, 6MM(D) X 8.5MM(L)

7

NOSM310

NANOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 10MM(L)

9

NIIOS5413 NANOTITE CERTAIN PREVAIL IMPLANT,
5MM(D) X 4.1MM(P) X 13MM(L)

4

NOSM311

NANOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L)

9

NIIOS5415 NANOTITE CERTAIN PREVAIL IMPLANT,
5MM(D) X 4.1MM(P) X 15MM(L)

4

NOSM313

NANOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 13MM(L)

9

NOSM315

NANOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 15MM(L)

9

NIOSM310 NANOTITE PARALLEL WALLED CERTAIN IMPLANT,
3.25MM(D) X 10MM(L)

5

NOSM318

NANOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 18MM(L)

9

NOSM385

NANOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 8.5MM(L)

9

NIOSM311 NANOTITE PARALLEL WALLED CERTAIN IMPLANT,
3.25MM(D) X 11.5MM(L)

5

NOSS407

NANOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 7MM(L)

9

NOSS410

NANOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 10MM(L)

9

NIOSM313 NANOTITE PARALLEL WALLED CERTAIN IMPLANT,
3.25MM(D) X 13MM(L)

5

NOSS411

NANOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L)

9

NIOSM315 NANOTITE PARALLEL WALLED CERTAIN IMPLANT,
3.25MM(D) X 15MM(L)

5

58

NOSS413

NANOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 13MM(L)

9

NOSS415

NANOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 15MM(L)

9

Index
Item#

Description

Page#

Item#

Description

Page#

NOSS418

NANOTITE™ PARALLEL WALLED IMPLANT, 4MM(D) X 18MM(L)

9

NTAPKT

DENSE BONE TAP KIT TRAY FOR TAPERED IMPLANTS

NOSS485

NANOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 8.5MM(L)

9

NTDI3210

OSSEOTITE TAPERED DEPTH INDICATOR, 3.25MM X 10MM

NOSS507

NANOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 7MM(L)

9

NTDI3211

OSSEOTITE TAPERED DEPTH INDICATOR, 3.25MM X 11.5MM

29,38

NOSS510

NANOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 10MM(L)

9

NTDI3213

OSSEOTITE TAPERED DEPTH INDICATOR, 3.25MM X 13MM

29,38

NOSS511

NANOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 11.5MM(L)

9

NTDI3215

OSSEOTITE TAPERED DEPTH INDICATOR, 3.25MM X 15MM

29,38

NOSS513

NANOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 13MM(L)

9

NTDI3285

OSSEOTITE TAPERED DEPTH INDICATOR, 3.25MM X 8.5MM

29,38

NOSS515

NANOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 15MM(L)

9

NTDI410

OSSEOTITE TAPERED DEPTH INDICATOR, 4MM X 10MM

29,38

NOSS518

NANOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 18MM(L)

9

NTDI411

OSSEOTITE TAPERED DEPTH INDICATOR, 4MM X 11.5MM

29,38

NOSS585

NANOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 8.5MM(L)

9

NTDI413

OSSEOTITE TAPERED DEPTH INDICATOR, 4MM X 13MM

29,38

NOSS607

NANOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 7MM(L)

9

NTDI415

OSSEOTITE TAPERED DEPTH INDICATOR, 4MM X 15MM

29,38

NOSS610

NANOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 10MM(L)

9

NTDI485

OSSEOTITE TAPERED DEPTH INDICATOR, 4MM X 8.5MM

29,38

NOSS611

NANOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 11.5MM(L)

9

NTDI510

OSSEOTITE TAPERED DEPTH INDICATOR, 5MM X 10MM

29,38

NOSS613

NANOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 13MM(L)

9

NTDI511

OSSEOTITE TAPERED DEPTH INDICATOR, 5MM X 11.5MM

29,38

NOSS615

NANOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 15MM(L)

9

NTDI513

OSSEOTITE TAPERED DEPTH INDICATOR, 5MM X 13MM

29,38

NOSS618

NANOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 18MM(L)

9

NTDI515

OSSEOTITE TAPERED DEPTH INDICATOR, 5MM X 15MM

29,38

NOSS685

NANOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 8.5MM(L)

9

NTDI585

OSSEOTITE TAPERED DEPTH INDICATOR, 5MM X 8.5MM

29,38

NT3210

OSSEOTITE® TAPERED IMPLANT, 3.25MM(D) X 10MM(L)

8

NTDI610

OSSEOTITE TAPERED DEPTH INDICATOR, 6MM X 10MM

29,38

NT3211

OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 11.5MM(L)

8

NTDI611

OSSEOTITE TAPERED DEPTH INDICATOR, 6MM X 11.5MM

29,38

NT3213

OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 13MM(L)

8

NTDI613

OSSEOTITE TAPERED DEPTH INDICATOR, 6MM X 13MM

29,38

NT3215

OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 15MM(L)

8

NTDI615

OSSEOTITE TAPERED DEPTH INDICATOR, 6MM X 15MM

29,38

NT3285

OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 8.5MM(L)

8

NTDI685

OSSEOTITE TAPERED DEPTH INDICATOR, 6MM X 8.5MM

29,38

NT410

OSSEOTITE TAPERED IMPLANT, 4MM(D) X 10MM(L)

8

NTDIK

OSSEOTITE TAPERED DIRECTION/DEPTH INDICATOR KIT

38

NT411

OSSEOTITE TAPERED IMPLANT, 4MM(D) X 11.5MM(L)

8

NTOST0

OSSEOTITE TAPERED OSTEOTOME SYSTEM KIT, STRAIGHT

41

NT413

OSSEOTITE TAPERED IMPLANT, 4MM(D) X 13MM(L)

8

NTOST0A

OSSEOTITE TAPERED OSTEOTOME SYSTEM KIT, ANGLED

41

NT415

OSSEOTITE TAPERED IMPLANT, 4MM(D) X 15MM(L)

8

NTOST3

OSSEOTITE TAPERED STRAIGHT OSTEOTOME, 3.25MM

41

NT485

OSSEOTITE TAPERED IMPLANT, 4MM(D) X 8.5MM(L)

8

NTOST3A

OSSEOTITE TAPERED ANGLED OSTEOTOME, 3.25MM

41

NT510

OSSEOTITE TAPERED IMPLANT, 5MM(D) X 10MM(L)

8

NTOST4

OSSEOTITE TAPERED STRAIGHT OSTEOTOME, 4MM

41

NT511

OSSEOTITE TAPERED IMPLANT, 5MM(D) X 11.5MM(L)

8

NTOST4A

OSSEOTITE TAPERED ANGLED OSTEOTOME, 4MM

41

NT513

OSSEOTITE TAPERED IMPLANT, 5MM(D) X 13MM(L)

8

NTOST5

OSSEOTITE TAPERED STRAIGHT OSTEOTOME, 5MM

41

NT515

OSSEOTITE TAPERED IMPLANT, 5MM(D) X 15MM(L)

8

NTOST5A

OSSEOTITE TAPERED ANGLED OSTEOTOME, 5MM

41

NT585

OSSEOTITE TAPERED IMPLANT, 5MM(D) X 8.5MM(L)

8

NTOST6

OSSEOTITE TAPERED STRAIGHT OSTEOTOME, 6MM

41

NT610

OSSEOTITE TAPERED IMPLANT, 6MM(D) X 10MM(L)

8

NTOST6A

OSSEOTITE TAPERED ANGLED OSTEOTOME, 6MM

41

NT611

OSSEOTITE TAPERED IMPLANT, 6MM(D) X 11.5MM(L)

8

NTOSTTRA OSSEOTITE TAPERED OSTEOTOME TRAY, ANGLED

41

NT613

OSSEOTITE TAPERED IMPLANT, 6MM(D) X 13MM(L)

8

NTOSTTRS OSSEOTITE TAPERED OSTEOTOME TRAY, STRAIGHT

41

NT615

OSSEOTITE TAPERED IMPLANT, 6MM(D) X 15MM(L)

8

OG1520

NT685

OSSEOTITE TAPERED IMPLANT, 6MM(D) X 8.5MM(L)

8

OG2030

OSSEOGUARD RESORBABLE COLLAGEN MEMBRANE, 20MM X 30MM

47

NTAP3210

DENSE BONE TAP FOR TAPERED IMPLANTS, 3.25MM(D) X 10MM(L) 28,37

OG3040

OSSEOGUARD RESORBABLE COLLAGEN MEMBRANE, 30MM X 40MM

47

NTAP3211

DENSE BONE TAP FOR TAPERED IMPLANTS, 3.25MM(D) X 11.5MM(L) 28,37

OGF1520

OSSEOGUARD FLEX® RESORBABLE COLLAGEN MEMBRANE, 15MM X 20MM 47

29
29,38

OSSEOGUARD® RESORBABLE COLLAGEN MEMBRANE, 15MM X 20MM 47

NTAP3213

DENSE BONE TAP FOR TAPERED IMPLANTS, 3.25MM(D) X 13MM(L) 28,37

OGF2030

OSSEOGUARD FLEX RESORBABLE COLLAGEN MEMBRANE, 20MM X 30MM 47

NTAP3215

DENSE BONE TAP FOR TAPERED IMPLANTS, 3.25MM(D) X 15MM(L) 28,37

OGF3040

OSSEOGUARD FLEX RESORBABLE COLLAGEN MEMBRANE, 30MM X 40MM 47

NTAP3285

DENSE BONE TAP FOR TAPERED IMPLANTS, 3.25MM(D) X 8.5MM(L) 28,37

OSM310

OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 10MM(L)

10

NTAP410

DENSE BONE TAP FOR TAPERED IMPLANTS, 4MM(D) X 10MM(L)

28,37

OSM311

OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L)

10

NTAP411

DENSE BONE TAP FOR TAPERED IMPLANTS, 4MM(D) X 11.5MM(L)

28,37

OSM313

OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 13MM(L)

10

NTAP413

DENSE BONE TAP FOR TAPERED IMPLANTS, 4MM(D) X 13MM(L)

28,37

OSM315

OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 15MM(L)

10

NTAP415

DENSE BONE TAP FOR TAPERED IMPLANTS, 4MM(D) X 15MM(L)

28,37

OSM318

OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 18MM(L)

10

NTAP485

DENSE BONE TAP FOR TAPERED IMPLANTS, 4MM(D) X 8.5MM(L)

28,37

OSM385

OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 8.5MM(L)

10

NTAP510

DENSE BONE TAP FOR TAPERED IMPLANTS, 5MM(D) X 10MM(L)

28,37

OSS310

OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 6MM(L)

10

NTAP511

DENSE BONE TAP FOR TAPERED IMPLANTS, 5MM(D) X 11.5MM(L)

29,37

OSS311

OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 11.5MM(L)

10

NTAP513

DENSE BONE TAP FOR TAPERED IMPLANTS, 5MM(D) X 13MM(L)

29,37

OSS313

OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 13MM(L)

10

NTAP515

DENSE BONE TAP FOR TAPERED IMPLANTS, 5MM(D) X 15MM(L)

29,37

OSS315

OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 15MM(L)

10

NTAP585

DENSE BONE TAP FOR TAPERED IMPLANTS, 5MM(D) X 8.5MM(L)

28,37

OSS318

OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 18MM(L)

10

NTAP610

DENSE BONE TAP FOR TAPERED IMPLANTS, 6MM(D) X 10MM(L)

29,37

OSS320

OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 20MM(L)

10

NTAP611

DENSE BONE TAP FOR TAPERED IMPLANTS, 6MM(D) X 11.5MM(L)

29,37

OSS385

OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 8.5MM(L)

10

NTAP613

DENSE BONE TAP FOR TAPERED IMPLANTS, 6MM(D) X 13MM(L)

29,37

OSS410

OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 6MM(L)

10

NTAP615

DENSE BONE TAP FOR TAPERED IMPLANTS, 6MM(D) X 15MM(L)

29,37

OSS411

OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L)

10

NTAP685

DENSE BONE TAP FOR TAPERED IMPLANTS, 6MM(D) X 8.5MM(L)

29,37

OSS413

OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 13MM(L)

10

NTAPK

DENSE BONE TAP KIT

OSS415

OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 15MM(L)

10

37

59

Index
Item#

Description

OSS418

OSSEOTITE® PARALLEL WALLED IMPLANT, 4MM(D) X 18MM(L)

10

QSD513

QUAD SHAPING DRILL, 5MM(D) X 13MM(L)

28,35

OSS420

OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 20MM(L)

10

QSD515

QUAD SHAPING DRILL, 5MM(D) X 15MM(L)

28,35

OSS485

OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 8.5MM(L)

10

QSD585

QUAD SHAPING DRILL, 5MM(D) X 8.5MM(L)

28,35

OSS507

OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 7MM(L)

10

QSD610

QUAD SHAPING DRILL, 6MM(D) X 10MM(L)

28,35

OSS510

OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 10MM(L)

10

QSD611

QUAD SHAPING DRILL, 6MM(D) X 11.5MM(L)

28,35

OSS511

OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 11.5MM(L)

10

QSD613

QUAD SHAPING DRILL, 6MM(D) X 13MM(L)

28,35

OSS513

OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 13MM(L)

10

QSD615

QUAD SHAPING DRILL, 6MM(D) X 15MM(L)

28,35

OSS515

OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 15MM(L)

10

QSD685

QUAD SHAPING DRILL, 6MM(D) X 8.5MM(L)

28,35

OSS518

OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 18MM(L)

10

RASH3N

NARROW RIGHT ANGLE LARGE HEXED DRIVER TIP, 24MM(L) 22,26,30,32,34

OSS585

OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 8.5MM(L)

10

RDCA205

CANCELLOUS, PARTIALLY DEMINERALIZED, 0.5CC, 200-300µm

45

OSS607

OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 7MM(L)

10

RDCA210

CANCELLOUS, PARTIALLY DEMINERALIZED, 1CC, 200-300µm

45

OSS610

OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 10MM(L)

10

RDCA220

CANCELLOUS, PARTIALLY DEMINERALIZED, 2CC, 200-300µm

45

OSS611

OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 11.5MM(L)

10

RDCA305

CANCELLOUS, PARTIALLY DEMINERALIZED, 0.5CC, 300-500µm

45

OSS613

OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 13MM(L)

10

RDCA305R CANCELLOUS, PARTIALLY DEMINERALIZED, IRRADIATED, 0.5CC, 300-500µm 46

OSS615

OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 15MM(L)

10

RDCA310

OSS618

OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 18MM(L)

10

RDCA310R CANCELLOUS, PARTIALLY DEMINERALIZED, IRRADIATED, 1CC, 300-500µm 46

OSS685

OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 8.5MM(L)

10

RDCA320

OST00

SUMMERS OSTEOTOME KIT #1-4

41

RDCA320R CANCELLOUS, PARTIALLY DEMINERALIZED, IRRADIATED, 2CC, 300-500µm 46

OST01

SUMMERS OSTEOTOME #1

41

RDCA505

CANCELLOUS, PARTIALLY DEMINERALIZED, 0.5CC, 500-800µm

45

OST02

SUMMERS OSTEOTOME #2

41

RDCA510

CANCELLOUS, PARTIALLY DEMINERALIZED, 1CC, 500-800µm

45

OST03

SUMMERS OSTEOTOME #3

41

RDCA520

CANCELLOUS, PARTIALLY DEMINERALIZED, 2CC, 500-800µm

45

OST04

SUMMERS OSTEOTOME #4

41

RDCO205

CORTICAL, PARTIALLY DEMINERALIZED, 0.5CC, 200-300µm

45

OST05

SUMMERS OSTEOTOME #5

41

RDCO205R CORTICAL, PARTIALLY DEMINERALIZED, IRRADIATED, 0.5CC, 200-300µm 46

OST10

SUMMERS OSTEOTOME KIT #1-5

41

RDCO210

CORTICAL, PARTIALLY DEMINERALIZED, 1CC, 200-300µm

45

OST20

SUMMERS OSTEOTOME KIT #1-5 AND FUTURE SITE

41

RDCO220

CORTICAL, PARTIALLY DEMINERALIZED, 2CC, 200-300µm

45

OSTFS

SUMMERS OSTEOTOME FOR FUTURE SITE

41

RDCO305

CORTICAL, PARTIALLY DEMINERALIZED, 0.5CC, 300-500µm

45

OSTTR

SUMMERS OSTEOTOME SYSTEM TRAY

41

RDCO305R CORTICAL, PARTIALLY DEMINERALIZED, IRRADIATED, 0.5CC, 300-500µm 46

PD100

PILOT REUSABLE DRILL, 2-3MM

32,33,35

PEMODLOC PATIENT ED MODEL - LOCATOR®

48

PEMODSM PATIENT ED MODEL - SINGLE/MULTIPLE TEETH

Page#

Item#

RDCO310

Description

Page#

CANCELLOUS, PARTIALLY DEMINERALIZED, 1CC, 300-500µm

CANCELLOUS, PARTIALLY DEMINERALIZED, 2CC, 300-500µm

CORTICAL, PARTIALLY DEMINERALIZED, 1CC, 300-500µm

45

45

45

RDCO310R CORTICAL, PARTIALLY DEMINERALIZED, IRRADIATED, 1CC, 300-500µm 46
RDCO320

48

CORTICAL, PARTIALLY DEMINERALIZED, 2CC, 300-500µm

45

RDCO320R CORTICAL, PARTIALLY DEMINERALIZED, IRRADIATED, 2CC, 300-500µm 46

PHD00N

NARROW POSTERIOR SMALL HEX DRIVER, 17MM

30,32,34

PHD02N

NARROW POSTERIOR LARGE HEX DRIVER, 17MM

22,26,30,32,34

RDCO505

CORTICAL, PARTIALLY DEMINERALIZED, 0.5CC, 500-800µm

45

PSKT01

STARTER KIT

31,32

RDCO510

CORTICAL, PARTIALLY DEMINERALIZED, 1CC, 500-800µm

45

PSKT10

BASIC SURGICAL KIT - PLASTIC

33,34

RDCO520

CORTICAL, PARTIALLY DEMINERALIZED, 2CC, 500-800µm

PSKT20

STANDARD UNISYSTEM SURGICAL KIT - PLASTIC

33,34

RD100

STAINLESS STEEL ROUND DRILL, 2MM(D)

PSKT30

PREMIUM UNISYSTEM SURGICAL KIT

33,34

RE100

RATCHET EXTENSION - SHORT, 6MM(L)

22,26,29,32,34,39

PSKT35

CERTAIN® PREMIUM SURGICAL KIT

31,32

RE200

RATCHET EXTENSION - LONG, 15MM(L)

22,26,29,32,34,39

45
32,34,35

PSKT40

CERTAIN PREMIUM SURGICAL KIT FOR PARALLEL WALLED IMPLANT 31,32

RMB30

RADIOGRAPHIC MARKING BALLS (30-PACK)

40

PTT100

PLASTIC TRAY ORGANIZER

RMCA205

CANCELLOUS, MINERALIZED, 0.5CC, 200-300µm

45

PTT300I

PLASTIC SURGICAL TRAY ORGANIZER

QBM001

R. QUÉTIN BONE MILL

QNTSK20

TAPERED IMPLANT STARTER (BASIC) KIT

28,29,30

RMCA220

CANCELLOUS, MINERALIZED, 2CC, 200-300µm

45

QNTSK40

TAPERED IMPLANT QUAD SHAPING DRILL, PREMIUM SURGICAL KIT 28,29,30

RMCA305

CANCELLOUS, MINERALIZED, 0.5CC, 300-500µm

45

31,33,34
31,33
47

RMCA205R CANCELLOUS, MINERALIZED, IRRADIATED, 0.5CC, 200-300µm

46

RMCA210

45

CANCELLOUS, MINERALIZED, 1CC, 200-300µm

QNTSK40U TAPERED IMPLANT QUAD SHAPING DRILL, PREMIUM UPGRADE KIT 28,29,30

RMCA305R CANCELLOUS, MINERALIZED, IRRADIATED, 0.5CC, 300-500µm

46

QNTSKT

QSD/NTDI SURGICAL TRAY

RMCA310

45

QSD3210

QUAD SHAPING DRILL, 3.25MM(D) X 10MM(L)

28,35

RMCA310R CANCELLOUS, MINERALIZED, IRRADIATED, 1CC, 300-500µm

46

QSD3211

QUAD SHAPING DRILL, 3.25MM(D) X 11.5MM(L)

28,35

RMCA320

45

QSD3213

QUAD SHAPING DRILL, 3.25MM(D) X 13MM(L)

28,35

RMCA505

CANCELLOUS, MINERALIZED, 0.5CC, 500-800µm

45

QSD3215

QUAD SHAPING DRILL, 3.25MM(D) X 15MM(L)

28,35

RMCA510

CANCELLOUS, MINERALIZED, 1CC, 500-800µm

45

QSD3285

QUAD SHAPING DRILL, 3.25MM(D) X 8.5MM(L)

28,35

RMCA520

CANCELLOUS, MINERALIZED, 2CC, 500-800µm

45

QSD410

QUAD SHAPING DRILL, 4MM(D) X 10MM(L)

28,35

RMCO205

CORTICAL, MINERALIZED, 0.5CC, 200-300µm

45

QSD411

QUAD SHAPING DRILL, 4MM(D) X 11.5MM(L)

28,35

RMCO210

CORTICAL, MINERALIZED, 1CC, 200-300µm

45

QSD413

QUAD SHAPING DRILL, 4MM(D) X 13MM(L)

28,35

RMCO220

CORTICAL, MINERALIZED, 2CC, 200-300µm

45

QSD415

QUAD SHAPING DRILL, 4MM(D) X 15MM(L)

28,35

RMCO305

CORTICAL, MINERALIZED, 0.5CC, 300-500µm

45

QSD485

QUAD SHAPING DRILL, 4MM(D) X 8.5MM(L)

28,35

RMCO305R CORTICAL, MINERALIZED, IRRADIATED, 0.5CC, 300-500µm

46

QSD510

QUAD SHAPING DRILL, 5MM(D) X 10MM(L)

28,35

RMCO310

CORTICAL, MINERALIZED, 1CC, 300-500µm

45

QSD511

QUAD SHAPING DRILL, 5MM(D) X 11.5MM(L)

28,35

RMCO310R CORTICAL, MINERALIZED, IRRADIATED, 1CC, 300-500µm

46

29

60

CANCELLOUS, MINERALIZED, 1CC, 300-500µm

CANCELLOUS, MINERALIZED, 2CC, 300-500µm

Index
Item#

Description

Page#

Item#

Description

Page#

RMCO320

CORTICAL, MINERALIZED, 2CC, 300-500µm

45

SGDPH2

NAVIGATOR DRILL POSITIONING HANDLE 2

26

RMCO505

CORTICAL, MINERALIZED, 0.5CC, 500-800µm

45

SGDPH3

NAVIGATOR DRILL POSITIONING HANDLE 3

26

RMCO510

CORTICAL, MINERALIZED, 1CC, 500-800µm

45

SGDPH4

NAVIGATOR DRILL POSITIONING HANDLE 4

26

RMCO520

CORTICAL, MINERALIZED, 2CC, 500-800µm

45

SGDPH5

NAVIGATOR DRILL POSITIONING HANDLE 5

26

ROAP05

REGENEROSS® ALLOGRAFT PUTTY, 0.5CC SYRINGE

46

SGIAM4L

NAVIGATOR CERTAIN® ANALOG MOUNT, 4.1MM(D) - LONG

24

ROAP10

REGENEROSS ALLOGRAFT PUTTY, 1CC SYRINGE

46

SGIAM4S

NAVIGATOR CERTAIN ANALOG MOUNT, 4.1MM(D) - SHORT

24

ROAP20

REGENEROSS ALLOGRAFT PUTTY, 2CC SYRINGE

46

SGIAM5L

NAVIGATOR CERTAIN ANALOG MOUNT, 5MM(D) - LONG

24

ROAPM05

REGENEROSS ALLOGRAFT PUTTY PLUS, 0.5CC SYRINGE

46

SGIAM5S

NAVIGATOR CERTAIN ANALOG MOUNT, 5MM(D) - SHORT

24

ROAPM10

REGENEROSS ALLOGRAFT PUTTY PLUS, 1CC SYRINGE

46

SGIAM41

NAVIGATOR CERTAIN ANALOG MOUNT, 4.1MM(D) X 1(L)

27

ROAPM20

REGENEROSS ALLOGRAFT PUTTY PLUS, 2CC (4 X 0.5CC SYRINGES)

46

SGIAM42

NAVIGATOR CERTAIN ANALOG MOUNT, 4.1MM(D) X 2(L)

27

ROX05

ENDOBON® XENOGRAFT GRANULES, 0.5ML PACK

47

SGIAM43

NAVIGATOR CERTAIN ANALOG MOUNT, 4.1MM(D) X 3(L)

27

ROX10

ENDOBON XENOGRAFT GRANULES, 1ML PACK

47

SGIAM44

NAVIGATOR CERTAIN ANALOG MOUNT, 4.1MM(D) X 4(L)

27

ROX20

ENDOBON XENOGRAFT GRANULES, 2ML PACK

47

SGIAM51

NAVIGATOR CERTAIN ANALOG MOUNT, 5MM(D) X 1(L)

27

ROXLG20

ENDOBON XENOGRAFT GRANULES, 1000–2000µm, 2ML

47

SGIAM52

NAVIGATOR CERTAIN ANALOG MOUNT, 5MM(D) X 2(L)

27

ROXLG50

ENDOBON XENOGRAFT GRANULES, 1000–2000µm, 5ML

47

SGIAM53

NAVIGATOR CERTAIN ANALOG MOUNT, 5MM(D) X 3(L)

27

ROXLG80

ENDOBON XENOGRAFT GRANULES, 1000–2000µm, 8ML

47

SGIAM54

NAVIGATOR CERTAIN ANALOG MOUNT, 5MM(D) X 4(L)

27

SEKT1

SINUS ELEVATION KIT

42

SGIIM4L

NAVIGATOR CERTAIN IMPLANT MOUNT, 4.1MM(D) - LONG

22

SEKTR

SINUS ELEVATION TRAY

42

SGIIM4S

NAVIGATOR CERTAIN IMPLANT MOUNT, 4.1MM(D) - SHORT

22

SGD275A

NAVIGATOR® TWIST DRILL 2.75MM(D) X A(L)

25

SGIIM5L

NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) - LONG

22

SGD275B

NAVIGATOR TWIST DRILL, 2.75MM(D) X B(L)

25

SGIIM5S

NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) - SHORT

22

SGD275C

NAVIGATOR TWIST DRILL, 2.75MM(D) X C(L)

25

SGIIM41

NAVIGATOR CERTAIN IMPLANT MOUNT, 4.1MM(D) X 1(L)

26

SGD275D

NAVIGATOR TWIST DRILL, 2.75MM(D) X D(L)

25

SGIIM42

NAVIGATOR CERTAIN IMPLANT MOUNT, 4.1MM(D) X 2(L)

26

SGD275E

NAVIGATOR TWIST DRILL, 2.75MM(D) X E(L)

25

SGIIM43

NAVIGATOR CERTAIN IMPLANT MOUNT, 4.1MM(D) X 3(L)

26

SGD275Y

NAVIGATOR TWIST DRILL, 2.75MM(D) X Y(L)

26

SGIIM44

NAVIGATOR CERTAIN IMPLANT MOUNT, 4.1MM(D) X 4(L)

26

SGD275Z

NAVIGATOR TWIST DRILL, 2.75MM(D) X Z(L)

26

SGIIM51

NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) X 1(L)

26

SGD2A

NAVIGATOR TWIST DRILL, 2MM(D) X A(L)

25

SGIIM52

NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) X 2(L)

26

SGD2B

NAVIGATOR TWIST DRILL, 2MM(D) X B(L)

25

SGIIM53

NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) X 3(L)

26

SGD2C

NAVIGATOR TWIST DRILL, 2MM(D) X C(L)

25

SGIIM54

NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) X 4(L)

26

SGD2D

NAVIGATOR TWIST DRILL, 2MM(D) X D(L)

25

SGISD5

NAVIGATOR CERTAIN STARTER DRILL, 5MM(D)

SGD2Y

NAVIGATOR TWIST DRILL, 2MM(D) X Y(L)

26

SGKIT

NAVIGATOR SURGICAL KIT

SGD2Z

NAVIGATOR TWIST DRILL, 2MM(D) X Z(L)

26

SGLKIT

NAVIGATOR LABORATORY KIT

27

SGD325A

NAVIGATOR TWIST DRILL, 3.25MM(D) X A(L)

25

SGLTRAY

NAVIGATOR LABORATORY TRAY

27

SGD325B

NAVIGATOR TWIST DRILL, 3.25MM(D) X B(L)

25

SGQ-ER20H OSSEOCISION® 20:1 HANDPIECE

20

SGD325C

NAVIGATOR TWIST DRILL, 3.25MM(D) X C(L)

25

SGSD34

25

SGD325D

NAVIGATOR TWIST DRILL, 3.25MM(D) X D(L)

25

SGSD4

NAVIGATOR STARTER DRILL, 4.1MM(D)

25

SGD325E

NAVIGATOR TWIST DRILL, 3.25MM(D) X E(L)

25

SGSD45

NAVIGATOR STARTER DRILL, 4/5MM(D)

25

SGD325Y

NAVIGATOR TWIST DRILL, 3.25MM(D) X Y(L)

26

SGT25

STENT GUIDE TUBE (25-PACK)

40

SGD325Z

NAVIGATOR TWIST DRILL, 3.25MM(D) X Z(L)

26

SGTAP4

NAVIGATOR BONE TAP, 4.1MM(D)

26

SGD385A

NAVIGATOR TWIST DRILL, 3.85MM(D) X A(L)

25

SGTAP45

NAVIGATOR BONE TAP, 4/5MM(D)

26

SGD385B

NAVIGATOR TWIST DRILL, 3.85MM(D) X B(L)

25

SGTAP5

NAVIGATOR BONE TAP, 5MM(D)

26

SGD385C

NAVIGATOR TWIST DRILL, 3.85MM(D) X C(L)

25

SGTCD4L

TAPERED NAVIGATOR COUNTERSINK DRILL, 4.1MM(D) - LONG

21

SGD385Y

NAVIGATOR TWIST DRILL, 3.85MM(D) X Y(L)

26

SGTCD4S

TAPERED NAVIGATOR COUNTERSINK DRILL, 4.1MM(D) - SHORT

21

SGD385Z

NAVIGATOR TWIST DRILL, 3.85MM(D) X Z(L)

26

SGTCD5L

TAPERED NAVIGATOR COUNTERSINK DRILL, 5MM(D) - LONG

21

SGD3A

NAVIGATOR TWIST DRILL, 3MM(D) X A(L)

25

SGTCD5S

TAPERED NAVIGATOR COUNTERSINK DRILL, 5MM(D) - SHORT

21

SGD3B

NAVIGATOR TWIST DRILL, 3MM(D) X B(L)

25

SGTCP4L

TAPERED NAVIGATOR CORTICAL PERFORATOR, 4.1MM(D) - LONG

21

SGD3C

NAVIGATOR TWIST DRILL, 3MM(D) X C(L)

25

SGTCP4S

TAPERED NAVIGATOR CORTICAL PERFORATOR, 4.1MM(D) - SHORT

21

SGD3D

NAVIGATOR TWIST DRILL, 3MM(D) X D(L)

25

SGTCP5L

TAPERED NAVIGATOR CORTICAL PERFORATOR, 5MM(D) - LONG

21

SGD3E

NAVIGATOR TWIST DRILL, 3MM(D) X E(L)

25

SGTCP5S

TAPERED NAVIGATOR CORTICAL PERFORATOR, 5MM(D) - SHORT

21

SGD3Y

NAVIGATOR TWIST DRILL, 3MM(D) X Y(L)

26

SGTD19A

TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X A(L)

21

SGD3Z

NAVIGATOR TWIST DRILL, 3MM(D) X Z(L)

26

SGTD19B

TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X B(L)

21

SGD425A

NAVIGATOR TWIST DRILL, 4.25MM(D) X A(L)

25

SGTD19C

TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X C(L)

21

SGD425B

NAVIGATOR TWIST DRILL, 4.25MM(D) X B(L)

26

SGTD19D

TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X D(L)

21

SGD425C

NAVIGATOR TWIST DRILL, 4.25MM(D) X C(L)

26

SGTD19E

TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X E(L)

21

SGD425Y

NAVIGATOR TWIST DRILL, 4.25MM(D) X Y(L)

26

SGTD19F

TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X F(L)

21

SGD425Z

NAVIGATOR TWIST DRILL, 4.25MM(D) X Z(L)

26

SGTD19G

TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X G(L)

21

SGD2E

NAVIGATOR TWIST DRILL, 2MM(D) X E(L)

25

SGTD410L

TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 10MM(L) - LONG

22

SGDPH1

NAVIGATOR DRILL POSITIONING HANDLE 1

26

NAVIGATOR STARTER DRILL, 3/4MM(D)

25
25,26

SGTD410S TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 10MM(L) - SHORT 21

61

Index
Item#

Description

Page#

SGTD411L

TAPERED NAVIGATOR® SHAPING DRILL, 4.1MM(D) X 11.5MM(L) - LONG 22

TAP53S

BONE TAP, 5MM(D) X 7-13MM(L)

SGTD411S

TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 11.5MM(L) - SHORT 21

TAP58S

BONE TAP, 5MM(D) X 7-8.5MM(L)

37

SGTD413L

TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 13MM(L) - LONG

TAP618S

BONE TAP, 6MM(D) X 7-18MM(L)

37
32,33,37

22

32,33,37

SGTD413S TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 13MM(L) - SHORT 21

TAP63S

BONE TAP, 6MM(D) X 7-13MM(L)

SGTD415L

TAP68S

BONE TAP, 6MM(D) X 7-8.5MM(L)

37

TE003

TITANIUM ELEVATOR

39

TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 15MM(L) - LONG

22

SGTD415S TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 15MM(L) - SHORT 21
22

TF002

TITANIUM FORCEPS

39

SGTD485S TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 8.5MM(L) - SHORT 21

THA42

EP® 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 2MM(H)

16

SGTD485L

TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 8.5MM(L) - LONG

22

THA43

EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 3MM(H)

16

SGTD510S TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 10MM(L) - SHORT

22

THA44

EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 4MM(H)

16

TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 11.5MM(L) - LONG

22

THA46

EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 6MM(H)

16

SGTD511S TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 11.5MM(L) - SHORT 22

THA48

EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 8MM(H)

16

SGTD510L

SGTD511L

TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 10MM(L) - LONG

22

THA52

EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 2MM(H)

16

SGTD513S TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 13MM(L) - SHORT

22

THA53

EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 3MM(H)

16

SGTD515L

22

THA54

EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 4MM(H)

16

SGTD515S TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 15MM(L) - SHORT

22

THA56

EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 6MM(H)

16

TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 8.5MM(L) - LONG

22

THA58

EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 8MM(H)

16

SGTD585S TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 8.5MM(L) - SHORT

21

THA63

EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 3MM(H)

16
16

SGTD513L

SGTD585L

TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 13MM(L) - LONG

TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 15MM(L) - LONG

SGTDPHR

TAPERED NAVIGATOR REDUCTION DRILL POSITIONING HANDLE

22

THA64

EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 4MM(H)

SGTDPHT

TAPERED NAVIGATOR TWIST DRILL POSITIONING HANDLE

22

THA66

EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 6MM(H)

16

SGTLTRAY

TAPERED NAVIGATOR LABORATORY TRAY

24

THA68

EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 8MM(H)

16

SGTP4

NAVIGATOR TISSUE PUNCH, 4.1MM(D)

25

THRC4

TEMPORARY HEALING RETENTION CYLINDER, 4.1MM(D) X 4MM(H)

16

SGTP5

NAVIGATOR TISSUE PUNCH, 5MM(D)

25

THRC6

TEMPORARY HEALING RETENTION CYLINDER, 4.1MM(D) X 6MM(H)

16

SGTRAY

NAVIGATOR SURGICAL TRAY

25

TIBC1

TITANIUM NITRIDE COATED BONE CARRIER FOR SEKT1

42

SGTT410L

TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 10(L) - LONG

23

TIPL1

LARGE TITANIUM PLUGGER

42

SGTT410S

TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 10(L) - SHORT

23

TIPS1

SMALL TITANIUM PLUGGER

42

SGTT411L

TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 11.5(L) - LONG

23

TMP80

TISSUE MEASURING POST

39

SGTT411S

TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 11.5(L) - SHORT

23

TP001

TISSUE PUNCH, 4.1MM(D)

40

SGTT413L

TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 13(L) - LONG

23

TP005

TISSUE PUNCH, 5MM(D)

40

SGTT413S

TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 13(L) - SHORT

23

TP006

TISSUE PUNCH, 6MM(D)

40

SGTT415L

TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 15(L) - LONG

23

TRE02

TREPHINE BUR - 2MM INSIDE DIAMETER/3MM OUTSIDE DIAMETER

42

SGTT415S

TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 15(L) - SHORT

23

TRE04

TREPHINE BUR - 4MM INSIDE DIAMETER/5MM OUTSIDE DIAMETER

42

SGTT485L

TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 8.5(L) - LONG

23

TRE05

TREPHINE BUR - 5MM INSIDE DIAMETER/6MM OUTSIDE DIAMETER

42

SGTT485S

TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 8.5(L) - SHORT

23

TRE06

TREPHINE BUR - 6MM INSIDE DIAMETER/7MM OUTSIDE DIAMETER

42

SGTT510L

TAPERED NAVIGATOR BONE TAP, 5MM(D) X 10(L) - LONG

23

TRE08

TREPHINE BUR - 8MM INSIDE DIAMETER/9.3MM OUTSIDE DIAMETER

42

SGTT510S

TAPERED NAVIGATOR BONE TAP, 5MM(D) X 10(L) - SHORT

23

TST01

TITANIUM SUCTION TIP

39

SGTT511L

TAPERED NAVIGATOR BONE TAP, 5MM(D) X 11.5(L) - LONG

23

U198-013

OSSEOCISION® ELECTRICAL POWER CORD, 230V (AUSTRALIA)

20

SGTT511S

TAPERED NAVIGATOR BONE TAP, 5MM(D) X 11.5(L) - SHORT

23

U260-414

OSSEOCISION ELECTRICAL POWER CORD, 230V (EUROPE)

20

SGTT513L

TAPERED NAVIGATOR BONE TAP, 5MM(D) X 13(L) - LONG

23

U195-152

OSSEOCISION FUSES (100V/120V)

20

SGTT513S

TAPERED NAVIGATOR BONE TAP, 5MM(D) X 13(L) - SHORT

23

U197-152

OSSEOCISION FUSES (230V)

20

SGTT515L

TAPERED NAVIGATOR BONE TAP, 5MM(D) X 15(L) - LONG

23

U370-152

OSSEOCISION COOLANT SOLUTION HANGER POST

20

SGTT515S

TAPERED NAVIGATOR BONE TAP, 5MM(D) X 15(L) - SHORT

23

U370-003

OSSEOCISION CONTROL UNIT, 100V

20

SGTT585L

TAPERED NAVIGATOR BONE TAP, 5MM(D) X 8.5(L) - LONG

23

U371-003

OSSEOCISION CONTROL UNIT, 120V

20

SGTT585S

TAPERED NAVIGATOR BONE TAP, 5MM(D) X 8.5(L) - SHORT

23

U372-003

OSSEOCISION CONTROL UNIT, 230V

20

SGTTAPT

TAPERED NAVIGATOR BONE TAP TRAY

23

U389-013

OSSEOCISION ELECTRICAL POWER CORD, 100V

SGTTP4

TAPERED NAVIGATOR TISSUE PUNCH, 4.1MM(D)

21

WR150

RATCHET WRENCH

SGTTP5

TAPERED NAVIGATOR TISSUE PUNCH, 5MM(D)

21

WTH52

EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 5MM(P) X 2MM(H)

16

SGTTRAY

TAPERED NAVIGATOR SURGICAL TRAY

21

WTH53

EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 5MM(P) X 3MM(H)

16

SLIMKT

SURGICAL SLIM KIT FOR TAPERED CERTAIN® IMPLANTS

28,29,30

WTH54

EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 5MM(P) X 4MM(H)

16

SLIMKTE

SURGICAL SLIM KIT FOR CERTAIN & EXTERNAL HEX IMPLANTS

28,29,30

WTH56

EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 5MM(P) X 6MM(H)

16

TAP10

BONE TAP, 3.75MM(D) X 7-10MM(L)

37

WTH562

EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 6MM(P) X 2MM(H)

16

TAP13

BONE TAP, 3.75MM(D) X 7-13MM(L)

37

WTH563

EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 6MM(P) X 3MM(H)

16

TAP20

BONE TAP, 3.75MM(D) X 7-20MM(L)

37

WTH564

EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 6MM(P) X 4MM(H)

16

TAP410

BONE TAP, 4MM(D) X 7-10MM(L)

37

WTH566

EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 6MM(P) X 6MM(H)

16

TAP413

BONE TAP, 4MM(D) X 7-13MM(L)

32,33,37

WTH568

EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 6MM(P) X 8MM(H)

16

TAP420

BONE TAP, 4MM(D) X 7-20MM(L)

37

WTH58

EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 5MM(P) X 8MM(H)

16

TAP518S

BONE TAP, 5MM(D) X 7-18MM(L)

37

WTH62

EP 1-PIECE HEALING ABUTMENT, 6MM(D) X 6MM(P) X 2MM(H)

16

62

20
22,26,29,32,34

Index
Item#

Description

Page#

WTH63

EP® 1-PIECE HEALING ABUTMENT, 6MM(D) X 6MM(P) X 3MM(H)

16

WTH64

EP 1-PIECE HEALING ABUTMENT, 6MM(D) X 6MM(P) X 4MM(H)

16

Item#

Description

Page#

XIFOSS511 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
5MM(D) X 11.5MM(L)

6

XIFOSS513 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
5MM(D) X 13MM(L)

6

XIFOSS515 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
5MM(D) X 15MM(L)

6

XIFOSS585 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
5MM(D) X 8.5MM(L)

6

XIFOSS610 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
6MM(D) X 10MM(L)

6

XIFOSS611 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
6MM(D) X 11.5MM(L)

6

XIFOSS613 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
6MM(D) X 13MM(L)

6

XIFOSS615 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
6MM(D) X 15MM(L)

6
6

WTH66

EP 1-PIECE HEALING ABUTMENT, 6MM(D) X 6MM(P) X 6MM(H)

16

WTH68

EP 1-PIECE HEALING ABUTMENT, 6MM(D) X 6MM(P) X 8MM(H)

16

XDG00

GELB X-RAY DEPTH GAUGE KIT

40

XDG01

GELB X-RAY DEPTH GAUGE KIT, 2.3MM(D)

40

XDG13

GELB X-RAY DEPTH GAUGE, 2MM(D) X 13MM(L)

40

XDG20

GELB X-RAY DEPTH GAUGE, 2MM(D) X 20MM(L)

40

XDG2313

GELB X-RAY DEPTH GAUGE, 2.3MM(D) X 13MM(L)

40

XDG2320

GELB X-RAY DEPTH GAUGE, 2.3MM(D) X 20MM(L)

40

XFOS310

OSSEOTITE® 2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 10MM(L)

9

XFOS311

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 11.5MM(L)

9

XFOS313

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 13MM(L)

9

XFOS315

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 15MM(L)

9

XFOS365

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 6.5MM(L)

9

XFOS385

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 8.5MM(L)

9

XFOS410

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 4MM(D) X 10MM(L)

9

XIFOSS685 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
6MM(D) X 8.5MM(L)
XIIOS4310

OSSEOTITE 2 CERTAIN PREVAIL® IMPLANT,
4MM(D) X 3.4MM(P) X 10MM(L)

4

XIIOS4311

OSSEOTITE 2 CERTAIN PREVAIL IMPLANT,
4MM(D) X 3.4MM(P) X 11.5MM(L)

4

XIIOS4313

OSSEOTITE 2 CERTAIN PREVAIL IMPLANT,
4MM(D) X 3.4MM(P) X 13MM(L)

4

XIIOS4315

OSSEOTITE 2 CERTAIN PREVAIL IMPLANT,
4MM(D) X 3.4MM(P) X 15MM(L)

4

XIIOS4385

OSSEOTITE 2 CERTAIN PREVAIL IMPLANT,
4MM(D) X 3.4MM(P) X 8.5MM(L)

4

XIIOS5410

OSSEOTITE 2 CERTAIN PREVAIL IMPLANT,
5MM(D) X 4.1MM(P) X 10MM(L)

4

XIIOS5411

OSSEOTITE 2 CERTAIN PREVAIL IMPLANT,
5MM(D) X 4.1MM(P) X 11.5MM(L)

4

XIIOS5413

OSSEOTITE 2 CERTAIN PREVAIL IMPLANT,
5MM(D) X 4.1MM(P) X 13MM(L)

4

XIIOS5415

OSSEOTITE 2 CERTAIN PREVAIL IMPLANT,
5MM(D) X 4.1MM(P) X 15MM(L)

4

XIIOS5485

OSSEOTITE 2 CERTAIN PREVAIL IMPLANT,
5MM(D) X 4.1MM(P) X 8.5MM(L)

4

XIIOS6510

OSSEOTITE 2 CERTAIN PREVAIL IMPLANT,
6MM(D) X 5MM(P) X 10MM(L)

4

XIIOS6511

OSSEOTITE 2 CERTAIN PREVAIL IMPLANT,
6MM(D) X 5MM(P) X 11.5MM(L)

4

XFOS411

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L)

9

XFOS413

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 4MM(D) X 13MM(L)

9

XFOS415

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 4MM(D) X 15MM(L)

9

XFOS465

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 4MM(D) X 6.5MM(L)

9

XFOS485

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 4MM(D) X 8.5MM(L)

9

XFOS510

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 5MM(D) X 10MM(L)

9

XFOS511

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 5MM(D) X 11.5MM(L)

9

XFOS513

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 5MM(D) X 13MM(L)

9

XFOS515

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 5MM(D) X 15MM(L)

9

XFOS565

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 5MM(D) X 6.5MM(L)

9

XFOS585

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 5MM(D) X 8.5MM(L)

9

XFOS610

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 6MM(D) X 10MM(L)

9

XFOS611

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 6MM(D) X 11.5MM(L)

9

XFOS613

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 6MM(D) X 13MM(L)

9

XFOS615

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 6MM(D) X 15MM(L)

9

XFOS665

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 6MM(D) X 6.5MM(L)

9

XFOS685

OSSEOTITE 2 PARALLEL WALLED IMPLANT, 6MM(D) X 8.5MM(L)

9

XFOSM310 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.25MM(D) X 10MM(L)

9

XFOSM311 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L)

9

XFOSM313 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.25MM(D) X 13MM(L)

9

XFOSM315 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.25MM(D) X 15MM(L)

9

XFOSM365 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.25MM(D) X 6.5MM(L)

9

XFOSM385 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.25MM(D) X 8.5MM(L)

9

XIFOSM310 OSSEOTITE 2 PARALLEL WALLED CERTAIN® IMPLANT,
3.25MM(D) X 10MM(L)

6

XIIOS6513

OSSEOTITE 2 CERTAIN PREVAIL IMPLANT,
6MM(D) X 5MM(P) X 13MM(L)

4

XIFOSM311 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
3.25MM(D) X 11.5MM(L)

6

XIIOS6515

OSSEOTITE 2 CERTAIN PREVAIL IMPLANT,
6MM(D) X 5MM(P) X 15MM(L)

4

XIFOSM313 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
3.25MM(D) X 13MM(L)

6

XIIOS6585

OSSEOTITE 2 CERTAIN PREVAIL IMPLANT,
6MM(D) X 5MM(P) X 8.5MM(L)

4

XIFOSM315 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
3.25MM(D) X 15MM(L)

6

XIFOSM385 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
3.25MM(D) X 8.5MM(L)

6

XIFOSS410 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
4MM(D) X 10MM(L)

6

XIFOSS411 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
4MM(D) X 11.5MM(L)

6

XIFOSS413 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
4MM(D) X 13MM(L)

6

XIFOSS415 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
4MM(D) X 15MM(L)

6

XIFOSS485 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
4MM(D) X 8.5MM(L)

6

XIFOSS510 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT,
5MM(D) X 10MM(L)

6

63

XTAP518S

OSSEOTITE 2 DENSE BONE TAP 5MM(D) X 7-18MM(L)

37

XTAP53S

OSSEOTITE 2 DENSE BONE TAP 5MM(D) X 7-13MM(L)

32,33,37

XTAP58S

OSSEOTITE 2 DENSE BONE TAP 5MM(D) X 7-8.5MM(L)

37

XTAP618S

OSSEOTITE 2 DENSE BONE TAP 6MM(D) X 7-18MM(L)

37

XTAP63S

OSSEOTITE 2 DENSE BONE TAP 6MM(D) X 7-13MM(L)

32,33,37

XTAP68S

OSSEOTITE 2 DENSE BONE TAP 6MM(D) X 7-8.5MM(L)

37

Y900-083

OSSEOCISION® IRRIGATION TUBE HOLDER

20

Y900-114

OSSEOCISION IRRIGATION TUBES, DISPOSABLE (10-PACK)

20

Z095-102

OSSEOCISION MOTOR CRADLE

20

Z103-101

OSSEOCISION HANDPIECE WRENCH

20

Z114-090

OSSEOCISION SPRAY LUBRICANT NOZZLE

20

Z144-095

OSSEOCISION NOZZLE CLEANING FINE WIRE

20

Z272-004

OSSEOCISION FOOT CONTROL (3.5M)

20

Ordering Form
Customer Account#

Date: ____/____/____

___________________________
Representative taking order

Customer Name:

Specialty:

Bill To:________________________________________________

Customer P.O. #:_______________________________________

______________________________________________________
______________________________________________________

Method of Shipment: _____FedEx

Phone #: (

)______________________________________

_____Next Day by 8:30am
_____Next Day by 10:30am
_____Next Day - Afternoon
_____Two Day
_____Ground
_____Other_____________

Ship To:______________________________________________
______________________________________________________
______________________________________________________
Phone #: (

_____UPS

)______________________________________

Would you like to receive information via email about
BIOMET 3i Products, Services and Events?
n Yes n No

Method of Payment:
n Credit Card: _____Visa _____MasterCard _____AMEX
Card #:____________________________________________
Expiration Date:_____________________________________

Email Address: __________________________________
Special Instructions:

n C.O.D.

Contact Name:
Product No.

Date:

n Bill - Net 30
Quantity

Order Number:

BIOMET 3i
4555 Riverside Drive
Palm Beach Gardens, FL 33410
Phone: 800-342-5454 • Fax: 561-776-1272
Website: www.biomet3i.com

Description

Order Total:

Thank you for your patronage!
64

Discount

Unit Price

Customer Service Representative:

Total

65

Ordering Information
Some products may not be available outside the U.S.A.
Algunos productos no se comercializan fuera de EE.UU.
Certains produits ne sont pas disponibles en dehors des États-Unis.
Einige Produkte sind außerhalb der USA nicht erhältlich.

To Place an Order:
Contact your local BIOMET 3i Representative or call:
BIOMET 3i Customer Service
Monday–Thursday 8am–8pm (EST)
Friday 8am–6:30pm (EST)
800-342-5454, Fax 561-776-1272
In Canada: 800-363-1980, Outside US: 561-776-6700
TERMS AND CONDITIONS OF SALE. The following are the terms and
conditions by which BIOMET 3i sells its products.
GOVERNING TERMS. Any shipment of products shall be deemed to be on
the terms and conditions stated herein. Any and all terms and conditions
submitted by Purchaser are hereby rejected.
TAXES. The prices set forth herein do not include any sales, use, excise,
ad valorem, property or other taxes applicable to the sale, use or delivery
of the products, all of which shall be paid by Purchaser separately or
added to the contract price and paid by Purchaser to BIOMET 3i.
PRICES. The prices set forth for the products are in United States Dollars.
DELIVERY. Products sold hereunder shall be delivered by BIOMET 3i,
F.O.B. Palm Beach Gardens, Florida.
PAYMENT. Payment terms shall be as set forth under the Terms section
on front of the invoice.
WARRANTY. BIOMET 3i nor any of its affiliates make any warranty,
express or implied, except that its products shall be free from defects in
material and/or workmanship. This warranty applies only to the original
Purchaser. In the event of a product defect, immediately notify BIOMET 3i
of the defect prior to returning the product. Devices shall be sterilized
prior to return. As its sole obligation and as Purchaser’s sole remedy
under this warranty, BIOMET 3i will, at its option, either repair, replace or
issue credit for such products. Purchaser assumes all risks and liability
resulting from the use of these products, whether used separately or in
combination with other products.
Except for the warranty expressly described in the warranty paragraph
above, neither BIOMET 3i nor any of its affiliates makes any other
warranty with respect to the BIOMET 3i Products, expressed or implied,
written or oral, including, without limitation, any implied warranty of
merchantability, or a warranty of fitness for a particular purpose.
EDUCATION; MODIFICATION OF PRODUCTS. BIOMET 3i reserves the
right to modify products, discontinue products and change specifications
of products.
RETURN POLICY. A Purchaser may return any BIOMET 3i Product within
90 days of the invoice date. BIOMET 3i Products returned within 60 days
of the invoice date will be accepted without any re-stocking fee to the
Purchaser. BIOMET 3i Products returned between 61 and 90 days of the
invoice date will be subject to a 15% restocking fee. A BIOMET 3i Product
will be accepted for return only if the BIOMET 3i Product is (1) returned in
its original, unopened package (including autoclavable products); (2)
received by BIOMET 3i within 90 days after the invoice date for that
product; and (3) returned freight prepaid to 4555 Riverside Drive, Palm
Beach Gardens, Florida 33410, (Attention: Returns Department)
accompanied by the BIOMET 3i Return Authorization Number provided by
the BIOMET 3i Customer Service Department. Purchaser should be
advised that BIOMET 3i Products not meeting the above criteria will not
be accepted for return.

EXCHANGE POLICY. BIOMET 3i Products may be exchanged within 180
days of the invoice date, without a re-stocking fee, for other BIOMET 3i
Products of equal or lesser value within the same product family as
determined by BIOMET 3i (ex. implant for implant, abutment
for abutment, membrane for membrane). BIOMET 3i Products may be
exchanged within 180 days of the invoice date for other BIOMET 3i
Products of greater value within the same product family as determined
by BIOMET 3i (ex. implant for implant, abutment for abutment, membrane
for membrane), with the price differential paid by the Purchaser. In both
cases, the exchanged BIOMET 3i Product must be (1) returned in its
original, unopened package (including autoclavable products); (2) a
currently offered BIOMET 3i Product (discontinued product not included);
and (3) returned freight prepaid to 4555 Riverside Drive, Palm Beach
Gardens, Florida 33410, (Attention: Returns Department) and
accompanied by the BIOMET 3i Products Return Authorization Number
provided by the BIOMET 3i Customer Service Department.
AVAILABILITY OF PRODUCTS. All products are not available in all areas.
Any offer or product void where prohibited by law.
EXPORT CONTROL. All products are subject to all applicable export
control and sanctions legislation.
FORCE MAJEURE. BIOMET 3i shall not be liable for any loss or damage
due to failure or delay arising out of any cause beyond the reasonable
control of BIOMET 3i. In the event of any failure or delay resulting from
such causes, an equitable adjustment of delivery and any other
appropriate terms and conditions shall be made. No such failure or delay
shall be the basis for an increase of obligation by BIOMET 3i nor any
termination by the Purchaser.
LIMITATION OF LIABILITY. Under no circumstances shall BIOMET 3i nor
any of its affiliates be liable for business interruption, loss of profits,
special, indirect, incidental or consequential damages of any nature and
from any cause whether based in contract, warranty or tort (including
negligence) or other legal theory, even if BIOMET 3i has been advised of
the possibility of such damages.
VALIDITY. If any provision of these Terms and Conditions is found to be
illegal or unenforceable in any respect, such illegality or unenforcibility
shall not affect any other provision of these Terms and Conditions, all of
which shall remain enforceable in accordance with their terms.
GENERAL PROVISIONS. The purchase of the products and these Terms
and Conditions are governed by the laws of Florida without regard to
conflicts of law principles. This document incorporates all oral and written
representations between the parties and constitutes the entire agreement
and understanding of the parties with respect to the subject matter hereof
and supercedes any and all other agreements either oral or written
between the parties with respect to such subject matter. No amendment or
modification may be made to this document unless made in writing and
duly executed by an authorized representative of BIOMET 3i.
CAUTION. Federal (U.S.) Law restricts these devices to sale by or on the
order of a licensed healthcare practitioner. Devices labeled STERILE are
certified to be sterile unless sterile package is opened or damaged.
EXPORT ORDERS. Require advance payment or letter of credit. Shipments
are made either by freight collect or paid by BIOMET 3i and added to the
invoice. Unless special instructions are received with an order, the
shipping method will be determined by BIOMET 3i, F.O.B. Palm Beach
Gardens, Florida.
DUNS #: 186127825
BIOMET 3i is listed in the SAM (U.S. System for Award Management)
Database.

Want More? Solutions Start Here
Check Out The BIOMET 3i Online Store at
www.shopbiomet3i.com
(US & Spain Customers Only)

For More Information, Please Contact Your Local BIOMET 3i Sales Representative

BIOMET 3i
EC REP BIOMET 3i
Dental Iberica S.L.
4555 Riverside Drive
WTC Almeda Park, Ed. 1, Planta 1ª
Palm Beach Gardens, FL 33410
Pl. de la Pau, s/n
1-800-342-5454
08940, Cornellà de Llobregat
Outside The U.S.: +1-561-776-6700
(Barcelona) Spain
Fax: +1-561-776-1272
Phone: +34-93-470-55-00
www.biomet3i.com
Fax: +34-93-371-78-49
www.shopbiomet3i.com

Join
Us

Follow
Us

Watch
Us

Download
It

3i T3, ACT, Advanced Cutting Technology, BellaTek, BellaTek design, Biogran, Bone Bonding, Certain, DCD, DIEM, Encode, Endobon, EP, GingiHue, GoldTite, Navigator, OSSEOCISION, OsseoGuard, OsseoGuard Flex, OSSEOTITE, OSSEOTITE XP, PreFormance, PREVAIL, Provide, QuickSeat, RegenerOss and
ZiReal are registered trademarks of BIOMET 3i LLC. 3i T3 design, ICE, NanoTite, Providing Solutions – One Patient At A Time and Twist Lock are trademarks
of BIOMET 3i LLC. LOCATOR is a registered trademark of Zest Anchors, Inc. Safescraper is a registered trademark of CGM S.p.A Divisione Medicale META.
©2015 BIOMET 3i LLC.
All trademarks herein are the property of BIOMET 3i LLC unless otherwise indicated. This material is intended for clinicians only and is NOT intended for patient
distribution. This material is not to be redistributed, duplicated or disclosed without the express written consent of BIOMET 3i. For additional product
information, including indications, contraindications, warnings, precautions and potential adverse effects, please visit the BIOMET 3i Website:
www.ifu.biomet3i.com.

INSTSUR
REV B 02/15



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2015:04:15 16:33:43-05:00
Creator                         : QuarkXPress(R) 9.51
Modify Date                     : 2015:04:15 16:36:38-04:00
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : QuarkXPress(R) 9.51
Metadata Date                   : 2015:04:15 16:36:38-04:00
Producer                        : QuarkXPress(R) 9.51
Format                          : application/pdf
Title                           : Surgical
Document ID                     : uuid:e2fa29d3-9172-8d46-8184-9b34c7001741
Instance ID                     : uuid:2ed1183f-f48b-f247-9fe3-ac196d064b76
Page Count                      : 78

EXIF Metadata provided by EXIF.tools