Surgical DU1000 And Site Preparation Product Catalog

User Manual: DU1000

Open the PDF directly: View PDF .
Page Count: 78

Product Catalog

For Site Preparation & Surgical Technologies

Table Of Contents

Introduction

Company Overview i

Implant & Abutment System Connections ii

Implant Body & Connection Types iv

Certain®Platform Switching Implants v

Surface Technologies

The 3i T3®Implant Family vi

The NanoTite™Implant Family vii

The OSSEOTITE®Implant Family vii

Top-Down Treatment Planning viii

Certain Internal Connection Implants

Tapered

3i T3 With DCD®Platform Switched 1

3i T3 With DCD Non-Platform Switched 1

3i T3 Platform Switched 1

3i T3 Non-Platform Switched 1

NanoTite Tapered Certain PREVAIL®3

NanoTite Tapered Certain 3

OSSEOTITE Tapered Certain PREVAIL 4

Full OSSEOTITE Tapered Certain 4

Parallel Walled

3i T3 With DCD Platform Switched 2

3i T3 With DCD Non-Platform Switched 2

3i T3 Platform Switched 2

3i T3 Non-Platform Switched 2

NanoTite Certain PREVAIL 5

OSSEOTITE 2Certain PREVAIL 5

NanoTite Parallel Walled Certain 6

OSSEOTITE 2Parallel Walled Certain 6

External Hex Connection Implants

Tapered Implants

3i T3 Tapered With DCD 7

3i T3 Tapered 7

NanoTite Tapered 7

Full OSSEOTITE Tapered 8

OSSEOTITE Tapered 8

Parallel Walled

3i T3 Parallel Walled With DCD 7

3i T3 Parallel Walled 7

NanoTite Parallel Walled 9

OSSEOTITE 2Parallel Walled 9

Full OSSEOTITE Parallel Walled 10

OSSEOTITE Parallel Walled 10

Healing Abutments

Certain Internal Connection

Encode®Two-Piece 12

EP®One-Piece 13

External Hex Connection

BellaTek®Encode Two-Piece 15

EP One-Piece 16

Site Preparation Technologies

Product Overview 17

DU1000 Surgical Drilling Unit 19

OSSEOCISION®Surgical Drilling Unit 20

Tapered Navigator®System For Guided Surgery 21

Parallel Walled Navigator System For Guided Surgery 25

Tapered Implant Surgical Kits 28

Parallel Walled Surgical Kits 31

ACT®Non-Irrigated Reusable Twist Drills 35

Surgical Drills

Drills, Quad Shaping Drills For Tapered Implants 35

Surgical Components

Handpiece Bone Profilers 36

Low Profile Abutment Bone Profilers 36

Certain Manual Bone Profilers 36

Bone Profiler Guide Pins 36

Bone Profiler Organizers & Kits 36

Bone Taps, Dense Bone Taps For Tapered Implants

Depth/Direction Indicators For Tapered Implants,

Direction Indicators, Mounts 38

Miscellaneous Instrumentation 39

Site Preparation Components

Straight And Angled Osteotomes,

Summer Osteotomes 41

Sinus Elevation, Trephine Burs 42

Regenerative Technologies

Product Overview 43

Allografts

RegenerOss®Allograft 45

RegenerOss Allograft Putty 46

RegenerOss Allograft Putty Plus 46

Xenografts

Endobon® Xenograft Granules 47

GBR Barriers

OsseoGuard®& OsseoGuard Flex®Membranes 47

Alloplasts

Biogran®47

Autogenous

Safescraper®TWIST, R. Quétin Bone-Mill 47

Patient Education Products 48

Additional Information

Important Product Information For Dental Implants 49

Important Product Information For Restorative Products

Index 51

Ordering Form 64

Ordering Information 66

Introduction

Headquartered in Palm Beach Gardens, Florida, with

operations throughout the world, BIOMET 3i is one of

the leading companies in the oral reconstruction

market. Of equal importance, BIOMET 3i brings the

same innovation, high standards and comprehensive

approach to customer service, dental practice and

laboratory support and education.

BIOMET 3i offers one of implant dentistry’s most

comprehensive lines of implants and abutments,

augmented by a growing line of site preparation, digital,

restorative and regenerative products.

BIOMET 3i pioneered the development of biologically

driven implants, winning worldwide acclaim for the

micro-textured OSSEOTITE®surface and then the nano-

scaled, Bone Bonding®NanoTite™Surface Implants.

The tradition of implant innovation continues with the

introduction of the 3i T3®Implant, a contemporary

hybrid that is designed for sustainable aesthetics.

This spirit of innovation continues with the introduction

of DIEM®2, a protocol to enable clinicians to pursue

immediate provisionalization options for full arch

patient cases.

Company Overview

Providing Solutions – One Patient At A Time™

Mission Statement:

BIOMET 3i will be recognized as a global leader in the oral reconstruction marketplace.

We will achieve this through superior customer support and continuous product innovation.

Introduction

Implant & Abutment System Connections

Certain®Internal Connection

The internal connection aspect of the implant and abutment are designed

for ease of use and simplicity.

• QuickSeat®Connection: It Clicks! The Certain Implant and Abutment

Systems feature the QuickSeat Connection. This unique connection

produces an audible and tactile “click” that confirms placement of

Impression Copings and Abutments.

• Abutment fingers cause the “click” and also provide retention for the

prosthetic components in the implant before the screw is placed. A screw

is needed to fully seat the components when the restoration is being

tried in or definitively placed.

• The 6/12 hex inside the internal connection incorporates both a 6-point

single and a 12-point double hex. The 6-point single hex has two

functions: engaging the driver tip for mountless delivery during implant

placement and providing anti-rotation for all straight abutments.

The 12-point double hex provides 30º rotational positioning for pre-

angled abutments.

• Impression Copings: Pick-Up and Twist Lock™Transfer Copings are

available in the Certain Internal Connection design, in three EP®

(Emergence Profile) diameters and a straight diameter to match the

corresponding Healing Abutment. The Impression Copings also “click”

when properly seated. These copings have a different finger design that

engages 2mm internally into the implant, as compared to the abutment’s

design that engages 4mm deep into the implant. This shorter engagement

into the implant is important because it allows off-axis draw for implant

impressions that are divergent.

• Color-Coding: Certain Implants and all interfacing components are

color-coded by restorative platform diameter for easy identification

and selection.

(purple)

3.4mm

(blue)

4.1mm

(yellow)

5mm

(green)

6mm

iii

Introduction

External Hex Connection

The external hex connection implant and abutment designs have been

widely used in implant dentistry.

• Gold Standard ZR (Zero Rotation) is a patented design incorporating

machined microstops within the corners of the hex in the abutment.

The design reduces horizontal rotation between the implant and

abutment. Gold Standard ZR is available on UCLA, GingiHue®and

Conical Abutments.

• The 12-point double hex, which is machined in the 15º Pre-Angled

GingiHue Abutment, provides rotational positioning in 30º increments

on the implant hex.

• Precise Abutment Placement: The ASYST Abutment Placement Tool

provides fingertip control for fast and easy abutment delivery. The

patented packaging design makes abutment placement easier because the

abutment is delivered sterile from the package directly to the implant site.

The abutment and abutment screw are packaged inside the plastic ASYST

seating device. The plastic seating device facilitates precise placement of

the abutment on the implant, thus reducing chair time. The ASYST Tool is

packaged with Low Profile, Standard and Conical Abutments.

• Impression Copings: Pick-Up and Twist Lock™ Transfer Copings are both

available in the external connection design in three EP®(Emergence

Profile) diameters and a straight diameter to match the corresponding

healing abutment. The patented Twist Lock design provides a more

accurate transfer of the implant connection as compared to other

transfer (closed tray) techniques. This unique Twist Lock feature provides

a series of undercuts to guide the coping into the impression, giving

stability to the impression coping/analog prior to pouring the impression.

As a result, the copings lock into orientation grooves upon clockwise

rotation, thereby allowing for a tactile sensation of resistance that ensures

an accurate hex transfer.

Implant & Abutment System Connections

Implant Body & Connection Types

Certain®Internal Connection Tapered

Implants & External Hex Connection

Tapered Implants

Tapered Implants closely approximate the shape of a natural tooth root

with a thread design that produces an anchoring “bite in bone”

response. These implants are available in the 3i T3®Contemporary

Hybrid, NanoTite™and OSSEOTITE®Surface configurations.

Certain Internal Connection Implants &

External Hex Connection Parallel Walled

Implants

Parallel Walled Implants feature a unique ICE™Self-Tapping Design.

These implants are available in the 3i T3 Contemporary Hybrid,

NanoTite and OSSEOTITE Surface configurations.

External ConnectionInternal Connection

External Connection

Internal Connection

Introduction

Icon Descriptions:

The following icons are used to represent

the connection type of the implant system:

Internal External

Introduction

Overview

created an implant system that is designed to help

clinicians in the pursuit of crestal bone preservation. The Certain

Platform Switching Implant features integrated platform switching,

which incorporates a coronal bevel design that medializes the

Implant Abutment Junction (IAJ). This feature is available on 3i T3®

OSSEOTITE®and NanoTite™Implants unless otherwise noted.

The surface extends to the top of the collar where the

medialization of the implant begins, creating a continuous

bone loading surface.

The Certain Platform Switching Implant offers the Certain

QuickSeat®Connection. This provides the clinician with an

audible and tactile click that confirms the abutment is properly

seated. The double hex allows for as many as 12 rotational

positions, which is ideal for angled abutments.

The Certain Platform Switching Implant’s prosthetic table is

appropriately color-coded to ensure proper matching of the

corresponding BIOMET 3i Abutments.

The Certain Platform Switching Implant is offered in two

different implant configurations:

Tapered Certain Platform Switching

Implant

Incorporates all of the design features of a platform switching

implant with a tapered design, which approximates the shape of

a natural tooth root. The innovative thread angle, depth and

pitch produce an anchoring “bite in bone” response for

establishing primary stability.

Parallel Walled

Certain

Platform

Switching Implant

The straight collar design incorporates platform switching using a

parallel walled implant.

Centralized IAJ:

Moves microgap in from shoulder

and centralizes occlusal forces.

Full Surface Treatment:

Elevates the bone loading

surface for maximum BIC.

4.1mm

5mm ˜15°

Angle

‚

.45mm

Tapered

Parallel Walled

Certain®Platform Switching Implant

‚

Abutment QuickSeat

Connection

Introduction

The 3i T3®Implant Family

The 3i T3 Implant represents the most recent advanced dental implant

surface technology since the introduction of the NanoTite™Implant in

2007. This latest surface technology is designed to deliver aesthetic

results through tissue preservation.

A contemporary hybrid surface is provided by complex multi-surface

topography. In preclinical studies*, the 3i T3 with DCD®Surface

demonstrated increased integration strength throughout the healing

phase as compared to less complex surface topographies.1

Osseointegration is achieved with initial bone-to-implant contact, a

major contributor to the implant’s stability.2The specifications of the

3i T3 Implant and surgical instrumentation are held to rigorous

tolerances to provide a closely integrated implant-to-osteotomy fit,

creating a dental implant system designed for primary stability.

The seal integrity is provided by a stable, tight implant/abutment

interface that can minimize abutment micromotion and reduce the

potential for microleakage.3The seal strength is designed to reduce

microleakage through exacting interface tolerances and maximized

clamping forces.

The Gold-Tite®Screw increases implant/abutment

clamping force by 113% as compared to a non-coated screw with the

Certain®Implant.4The patented Gold-Tite Surface lubrication allows the

screw to rotate further, increasing clamping force and maximizing

abutment stability.5Implants with integrated platform switching medialize

the implant/abutment junction (IAJ) inward, creating a biologic width

between connective tissue and the IAJ, helping to maintain bone levels.6

1. Davies JE†, Ajami E, Moineddin R, et al. The role of different scale ranges of surface implant topography on the stability of the bone/implant interface.

Biomaterials 2013;34(14):3535-3546. Epub 2013 Feb 14.

2. Meredith N. Assessment of implant stability as a prognostic determinant. Int J Prosthodont. 1998 Sep-Oct;11(5):491-501.

3. Gubbi P†, Suttin Z†, Towse R†. Microgap analysis at the implant-abutment interface of various dental implant systems. Poster Presentation (P-98): Academy of

Osseointegration 28th Annual Meeting, March 2013, Tampa, Florida, USA.

4. Suttin Z††, Towse R††. Effect of abutment screw design on implant system seal performance. Presented at the European Association for Osseointegration, 20th

Annual Scientific Meeting; October 2012; Copenhagen, Denmark. http://biomet3i.com/Pdf/Posters/P-450_Effect_of_Screw_Design_on_Implant_Seal.pdf

5. Byrne D, Jacobs S, O’Connell B, Houston F, Claffey N. Preloads generated with repeated tightening in three types of screws used in dental implant assemblies.

J. Prosthodont. 2006 May–Jun;15(3):164-171.

6. Lazzara R†, Porter SS. Platform switching: A new concept in implant dentistry for controlling post-restorative crestal bone levels. Int J Perio Rest Dent.

2006;26:9-17.

† JE Davies and R. Lazzara have financial relationships with BIOMET 3i LLC resulting from speaking engagements, consulting engagements and other retained

services.

†† Mr. Gubbi, Mr. Suttin and Mr. Towse contributed to the above research while employed by BIOMET 3i.

*Pre-clinical studies are not necessarily indicative of clinical results.

Fine micron features

on the implant collar

(1 - 3 microns) via dual

acid-etching (DAE)

Coarse micron feature:

(10+ microns) via resorbable

calcium phosphate media blast

Option for nano-scale features along the full

length of the implant.

Fine micron feature:

(1 - 3 microns) via dual

acid-etching (DAE) on top

of the blasted surface

Surface Technologies

vii

Introduction

The NanoTite™ Implant Family

The NanoTite Implant is the patented OSSEOTITE®dual-acid-etched surface,

which is then further treated with a deposition of nanometer scale crystals of

calcium phosphate. This is known as the Discrete Crystalline Deposition or

DCD®Process. The surface treatment is a discrete crystalline deposition on the

OSSEOTITE Surface, not a plasma sprayed coating.

The synergistic effect of these two technologies, the OSSEOTITE Surface and the

DCD Process has demonstrated promising results in animal studies.* Because of

this synergistic effect, a more complex micro-surface is created. Preclinical

studies* demonstrated that the NanoTite Surface treatment, when compared to

OSSEOTITE Control Implants, significantly improved the rate and extent of

bone-to-implant contact, resulting in statistically significant enhanced integration.1,2

For all NanoTite Configurations, wherever there is the dual-acid-etched

OSSEOTITE Surface, the DCD nano-scale calcium phosphate has been applied.

OSSEOTITE Surface at 20,000x

magnification

The OSSEOTITE®Implant Family

The OSSEOTITE Implant features the patented dual-acid-etched

surface that is optimal for improving the clot/implant attachment, which may

increase platelet activation and red blood cell (rbc) agglomeration.1

For more than 15 years, with documentation from numerous global multicenter

clinical evaluations,2-9 the OSSEOTITE Surface has proven to be one of the most

predictable and well-researched surfaces ever. Clinical studies on the OSSEOTITE

Surface document the benefits of increased contact osteogenesis, especially in poor

quality bone.10

NanoTite Surface at 20,000x

magnification

1. Park JY, Davies JE†. Red Blood Cell and Platelet Interactions with Titanium Implant Surfaces. Clinical Oral Implants Research. 2000:11:530-539.

2. Sullivan DY, Sherwood RL, Porter SS. Long-Term Performance of OSSEOTITE Implants: A 6-Year Clinical Follow-up. Compendium. April 2001; Vol. 22, No. 4.

3. Davarpanah M, Martinez H, Etienne D, Zabalegui I, Mattout P, Chiche F†, Michel J. A Prospective Multicenter Evaluation of 1,538 3i Implants: 1 to 5-year

Data. The International Journal of Oral & Maxillofacial Implants. 2002; Vol. 17, No. 6.

4. Feldman S, Boitel N, Weng D, Kohles SS, Stach RM†. Five-Year Survival Distributions of Short-Length (10mm or less) Machined-Surfaced and OSSEOTITE

Implants. Clinical Implant Dentistry and Related Research. 2004; Vol. 6, No. 1.

5. Sullivan D, Vincenzi G, Feldman S. Early Loading of OSSEOTITE Implants 2 Months After Placement in the Maxilla and Mandible: A 5-year Report. The

International Journal of Oral & Maxillofacial Implants. 2006; Vol. 20, No. 6.

6. Stach RM†, Kohles SS. A Meta-Analysis Examining the Clinical Survivability of Machined-Surfaced and OSSEOTITE Implants in Poor-Quality Bone. Implant

Dentistry. 2003; Vol. 12, No.1.

7. Testori T†, Wiseman L, Woolfe S, Porter SS. A Prospective Multicenter Clinical Study of the OSSEOTITE Implant: Four-Year Interim Report. The International

Journal of Oral & Maxillofacial Implants. 2001;16:193-200.

8. Gaucher H, Bentley K, Roy S, Head T, Blomfield J, Blondeau F, Nicholson L, Chehade A, Tardif N, Emery R†. A Multi-Centre Study of OSSEOTITE Implants

Supporting Mandibular Restorations: A 3-Year Report. Journal of the Canadian Dental Association. October 2001; Vol. 67, No. 9.

9. Testori T†, Fabbro MD, Feldman S, Vincenzi G, Sullivan D, Rossi R, Anitua E, Bianchi F, Francetti L, Weinstein RL. A Multicenter Prospective Evaluation of 2-

months Loaded OSSEOTITE Implants Placed in the Posterior Jaws: 3-year Follow-up Results. Clinical Oral Implants Research. 2002;13:154-161.

10. Stach RM††, Kohles SS. A Meta-Analysis Examining the Clinical Survivability of Machined-Surfaced and OSSEOTITE Implants In Poor Quality Bone. Implant

Dent 2003;12:87-96.

† F Chiche, JE Davies, R Emory and T Testori have financial relationships with BIOMET 3i LLC resulting from speaking engagements, consulting engagements and

other retained services.

†† RM Stach contributed to the above research while employed by BIOMET 3i.

1. Mendes VC, Davies JE†. Discrete calcium phosphate nanocrystals enhance osteoconduction on titanium-based implant surfaces. Canadian Biomaterials Society.

25th Annual Meeting. May 26-28, 2006. Calgary, Alberta, Canada.

2. Mendes VC, Davies JE†. Discrete calcium phosphate nanocrystals render titanium surfaces bone-bonding. Int J Oral Maxillofac Implant. 2007;22:484.

*Pre-clinical studies are not necessarily indicative of clinical results.

Surface Technologies

viii

Top-Down Treatment Planning

In its simplest form, top-down treatment planning

refers to a guideline whereby the desired restorative

result is considered first, leading to consideration of the

appropriate prosthetic platform and subsequent implant

selection based on bony anatomy and the size of the

missing tooth.

A top-down treatment planning methodology will provide

maximum biomechanical stability and allow for soft-tissue

flaring by utilizing an implant with a prosthetic platform

slightly smaller in diameter than the emergence diameter

of the tooth being replaced. The wide selection of

Implants allows clinicians to match the size

of the prosthetic platform to the restoration it will

eventually support, while allowing for different bone

volumes and anatomical features at the implant site.

Implant and healing abutment selections are based upon

the relationship of several key measurements:

• The emerging dimension of the crown in relation to

the diameter of the prosthetic platform of the implant

• The height and diameter of the intended restoration

at the tissue exit point

• The bone volume at the implant site in relation to the

diameter of the implant body

The Emergence Profile (EP®) Healing Abutment System

consists of healing abutments of various diameters and

heights for shaping the soft tissue to replicate the

geometry and gingival contours of natural dentition.

Implant Indications: Include both straight and pre-angled restorative components.

Anterior 44444444

Posterior 444444

NOTE: It is recommended that implants less than 4mm diameter not be placed in the posterior regions.

3.25mm(D) 3.75mm(D) 4mm(D) 5mm(D) 6mm(D) 4mm(D) X

3.4mm(P) 5mm(D) X

4.1mm(P) 6mm(D) X

5mm(P)

Top-Down Treatment Planning

7.5

3.5

5.5 5

55.5

6mm

6mm 4mm

5mm

6mm 3.25mm

4mm 5mm6mm

3.25mm

5mm

4mm

3.25mm

4mm

7.5

3.5

5.5 5

955.5

6mm 6mm

4mm

5mm

6mm 3.25mm

4mm 5mm6mm

3.25mm

5mm

3.75mm

3.25mm

4mm

Crown

Diameter

Crown

Diameter

Implant

Diameter

Implant

Diameter

Parallel Walled

Implants

Tapered

Implants

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 1

Certain®Internal Connection Implants

Tapered

3i T3 Platform Switched

Length

8.5mm BNPT4385 BNPT5485 BNPT6585

10mm BNPT4310 BNPT5410 BNPT6510

11.5mm BNPT4311 BNPT5411 BNPT6511

13mm BNPT4313 BNPT5413 BNPT6513

15mm BNPT4315 BNPT5415 BNPT6515

2.4

1.25 1.25 1.25

3.9

Commercially Pure Titanium

4.1 5 6

4.1 5

3.4

3.2

4mm(D) X

3.4mm(P) 5mm(D) X

4mm(P) 6mm(D) X

5mm(P)

3i T3 Non-Platform Switched

Commercially Pure Titanium

BNST3285 BNST485 BNST585 BNST685

BNST3210 BNST410 BNST510 BNST610

BNST3211 BNST411 BNST511 BNST611

BNST3213 BNST413 BNST513 BNST613

BNST3215 BNST415 BNST515 BNST615

1.25 1.25 1.25 1.25

2.4

1.9

4.1 56

3.9

3.2

3.4

3.25mm(D) 4mm(D) 6mm(D)

5mm(D)

3i T3®With DCD®Platform Switched

Length

8.5mm BOPT4385 BOPT5485 BOPT6585

10mm BOPT4310 BOPT5410 BOPT6510

11.5mm BOPT4311 BOPT5411 BOPT6511

13mm BOPT4313 BOPT5413 BOPT6513

15mm BOPT4315 BOPT5415 BOPT6515

Commercially Pure Titanium

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

BOST3285 BOST485 BOST585 BOST685

BOST3210 BOST410 BOST510 BOST610

BOST3211 BOST411 BOST511 BOST611

BOST3213 BOST413 BOST513 BOST613

BOST3215 BOST415 BOST515 BOST615

Cover Screw Flat

(included)

IMCSF34 ICSF41 ICSF50 IMCSF34 ICSF41 ICSF50 ICSF60

Cover Screw 1mm(H) IMMCS1 ICS375* ICS500 IMMCS1 ICS375* ICS500 ICS600

3i T3 With DCD Non-Platform Switched

Commercially Pure Titanium

New!

Contemporary

Hybrid

Surface

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 2

Certain®Internal Connection Implants

Parallel Walled

3i T3 Platform Switched

Length

8.5mm BNPS4385 BNPS5485 BNPS6585

10mm BNPS4310 BNPS5410 BNPS6510

11.5mm BNPS4311 BNPS5411 BNPS6511

13mm BNPS4313 BNPS5413 BNPS6513

15mm BNPS4315 BNPS5415 BNPS6515

18mm ———

Commercially Pure Titanium

4mm(D) X

3.4mm(P) 5mm(D) X

4mm(P) 6mm(D) X

5mm(P)

3i T3 Non-Platform Switched

Commercially Pure Titanium

BNSS385 BNSS485 BNSS585 BNSS685

BNSS310 BNSS410 BNSS510 BNSS610

BNSS311 BNSS411 BNSS511 BNSS611

BNSS313 BNSS413 BNSS513 BNSS613

BNSS315 BNSS415 BNSS515 BNSS615

BNSS318 BNSS418 ——

3.25mm(D) 4mm(D) 6mm(D)

5mm(D)

3i T3®With DCD®Platform Switched

Length

8.5mm BOPS4385 BOPS5485 BOPS6585

10mm BOPS4310 BOPS5410 BOPS6510

11.5mm BOPS4311 BOPS5411 BOPS6511

13mm BOPS4313 BOPS5413 BOPS6513

15mm BOPS4315 BOPS5415 BOPS6515

18mm ———

Commercially Pure Titanium

BOSS385 BOSS485 BOSS585 BOSS685

BOSS310 BOSS410 BOSS510 BOSS610

BOSS311 BOSS411 BOSS511 BOSS611

BOSS313 BOSS413 BOSS513 BOSS613

BOSS315 BOSS415 BOSS515 BOSS615

BOSS318 BOSS418 ——

4.1 5 6

2.8

.5.5.5

4.1 5

4.1

3.4

3.1

1.15 11.25 1.25

2.5 2.8

4.1 56

4.1

3.4

3.1

T3 With DCD Non-Platform Switched

Commercially Pure Titanium

New!

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

Cover Screw Flat

(included)

IMCSF34 ICSF41 ICSF50 IMCSF34 ICSF41 ICSF50 ICSF60

Cover Screw 1mm(H) IMMCS1 ICS375* ICS500 IMMCS1 ICS375* ICS500 ICS600

Contemporary

Hybrid

Surface

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 3

Full

NanoTite

Surface

Cover Screw Flat

(included)

IMCSF34 ICSF41 ICSF50

Cover Screw 1mm(H) IMMCS1 ICS375* ICS500

NanoTite™ Tapered Certain PREVAIL®

Length 4/3mm(P) 5/4mm(P) 6/5mm(P)

8.5mm NIITP4385 NIITP5485 NIITP6585

10mm NIITP4310 NIITP5410 NIITP6510

11.5mm NIITP4311 NIITP5411 NIITP6511

13mm NIITP4313 NIITP5413 NIITP6513

15mm NIITP4315 NIITP5415 NIITP6515

Titanium Alloy

2.4

3.2

1.25 1.25 1.25

3.9

3.4

4.1 5 6

4.1 5

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

Length 3.25mm(D) 4mm(D) 5mm(D) 6mm(D)

8.5mm NINT3285 NINT485 NINT585 NINT685

10mm NINT3210 NINT410 NINT510 NINT610

11.5mm NINT3211 NINT411 NINT511 NINT611

13mm NINT3213 NINT413 NINT513 NINT613

15mm NINT3215 NINT415 NINT515 NINT615

NanoTite Tapered Certain

Modified

Hybrid

NanoTite

Surface

1.25 1.25 1.25 1.25

2.4

1.9

Titanium Alloy

Cover Screw Flat

(included)

IMCSF34 ICSF41 ICSF50 ICSF60

Cover Screw 1mm(H) IMMCS1 ICS375* ICS500 ICS600

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

3.9

4.1 56

3.2

3.4

Certain®Internal Connection Implants

Tapered

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 4

Certain®Internal Connection Implants

Tapered

Full

OSSEOTITE

Surface

Cover Screw Flat

(included)

IMCSF34 ICSF41 ICSF50

Cover Screw 1mm(H) IMMCS1 ICS375* ICS500

OSSEOTITE®Tapered Certain PREVAIL®

Length 4/3mm(P) 5/4mm(P) 6/5mm(P)

8.5mm XIITP4385 XIITP5485 XIITP6585

10mm XIITP4310 XIITP5410 XIITP6510

11.5mm XIITP4311 XIITP5411 XIITP6511

13mm XIITP4313 XIITP5413 XIITP6513

15mm XIITP4315 XIITP5415 XIITP6515

2.4

1.25 1.25 1.25

3.9

Commercially Pure Titanium

4.1 5 6

4.1 5

3.4

3.2

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

Length 3.25mm(D) 4mm(D) 5mm(D) 6mm(D)

8.5mm XIFNT3285 XIFNT485 XIFNT585 XIFNT685

10mm XIFNT3210 XIFNT410 XIFNT510 XIFNT610

11.5mm XIFNT3211 XIFNT411 XIFNT511 XIFNT611

13mm XIFNT3213 XIFNT413 XIFNT513 XIFNT613

15mm XIFNT3215 XIFNT415 XIFNT515 XIFNT615

Full

OSSEOTITE

Surface

Full OSSEOTITE Tapered Certain

Commercially Pure Titanium

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

Cover Screw Flat

(included)

IMCSF34 ICSF41 ICSF50 ICSF60

Cover Screw 1mm(H) IMMCS1 ICS375* ICS500 ICS600

1.25 1.25 1.25 1.25

2.4

1.9

4.1 56

3.9

3.2

3.4

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 5

Certain®Internal Connection Implants

Parallel Walled

Full

NanoTite

Surface

Length 4/3mm(P) 5/4mm(P)

8.5mm NIIOS4385 NIIOS5485

10mm NIIOS4310 NIIOS5410

11.5mm NIIOS4311 NIIOS5411

13mm NIIOS4313 NIIOS5413

15mm NIIOS4315 NIIOS5415

Cover Screw Flat

(included)

IMCSF34 ICSF41

Cover Screw 1mm(H) IMMCS1 ICS375*

NanoTite™ Certain PREVAIL®

Titanium Alloy

Full

OSSEOTITE

Surface

Cover Screw Flat

(included)

IMCSF34 ICSF41 ICSF50

Cover Screw 1mm(H) IMMCS1 ICS375* ICS500

4.1 5 6

Certain PREVAIL

Length 4/3mm(P) 5/4mm(P) 6/5mm(P)

8.5mm XIIOS4385 XIIOS5485 XIIOS6585

10mm XIIOS4310 XIIOS5410 XIIOS6510

11.5mm XIIOS4311 XIIOS5411 XIIOS6511

13mm XIIOS4313 XIIOS5413 XIIOS6513

15mm XIIOS4315 XIIOS5415 XIIOS6515

2.8

Commercially Pure Titanium

.5 .5 .5

4.1 5

4.1

.5.5

2.6

4.1

4.1 5

3.4

3.1

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 6

Length 3.25mm(D) 4mm(D) 5mm(D) 6mm(D)

8.5mm NIOSM385 NIOSS485 NIOSS585 NIOSS685

10mm NIOSM310 NIOSS410 NIOSS510 NIOSS610

11.5mm NIOSM311 NIOSS411 NIOSS511 NIOSS611

13mm NIOSM313 NIOSS413 NIOSS513 NIOSS613

15mm NIOSM315 NIOSS415 NIOSS515 NIOSS615

18mm NIOSM318 NIOSS418 N/A N/A

Modified

Hybrid

NanoTite

Surface

Cover Screw Flat

(included)

IMCSF34 ICSF41 ICSF50 ICSF60

Cover Screw 1mm(H) IMMCS1 ICS375* ICS500 ICS600

NanoTite™ Parallel Walled Certain

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

Titanium Alloy

Length 3.25mm(D) 4mm(D) 5mm(D) 6mm(D)

8.5mm XIFOSM385 XIFOSS485 XIFOSS585 XIFOSS685

10mm XIFOSM310 XIFOSS410 XIFOSS510 XIFOSS610

11.5mm XIFOSM311 XIFOSS411 XIFOSS511 XIFOSS611

13mm XIFOSM313 XIFOSS413 XIFOSS513 XIFOSS613

15mm XIFOSM315 XIFOSS415 XIFOSS515 XIFOSS615

Parallel Walled Certain

Commercially Pure Titanium

Full

OSSEOTITE

Surface

Cover Screw Flat

(included)

IMCSF34 ICSF41 ICSF50 ICSF60

Cover Screw 1mm(H) IMMCS1 ICS375* ICS500 ICS600

*Non-Flared 4.1mm(P) Cover Screw ICS400 is also available.

1.15 1 1.25 1.25

2.4 2.6

4.1 56

4.1

1.15 1 1.25 1.25

2.5 2.8

4.1 56

4.1

3.4

3.1

Certain®Internal Connection Implants

Parallel Walled

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich.

3.4

1.25 1.25 1.25

2.5

2.4

2.7 2.7 2.7

4.1

3.2

1.25

3.9

1.9

Modified

Hybrid

NanoTite

Surface

NanoTite™ Tapered

Length 3.25mm(D) 4mm(D) 5mm(D) 6mm(D)

8.5mm NNT3285 NNT485 NNT585 NNT685

10mm NNT3210 NNT410 NNT510 NNT610

11.5mm NNT3211 NNT411 NNT511 NNT611

13mm NNT3213 NNT413 NNT513 NNT613

15mm NNT3215 NNT415 NNT515 NNT615

Cover Screw 1mm(H)

(included)

MMCS1 CS375 CS500 CS600

Cover Screw Headless CS275 CS275 CS275 CS275

Titanium Alloy

External Hex Connection Implants

Tapered & Parallel Walled

3i T3 Tapered

Commercially Pure Titanium

3i T3 Parallel Walled

Commercially Pure Titanium

BNES365 BNES3765 BNES465 BNES565 BNES665

BNES385 BNES3785 BNES485 BNES585 BNES685

BNES310 BNES3710 BNES410 BNES510 BNES610

BNES311 BNES3711 BNES411 BNES511 BNES611

BNES313 BNES3713 BNES413 BNES513 BNES613

BNES315 BNES3715 BNES415 BNES515 BNES615

BNES318 BNES3718 BNES418 BNES518 BNES618

3.25mm(D) 3.75mm(D) 4mm(D) 6mm(D)5mm(D)3.25mm(D) 4mm(D) 5mm(D) 6mm(D)

3i T3®Tapered With DCD®

Commercially Pure Titanium

3i T3 Parallel Walled With DCD

Commercially Pure Titanium

New!

Length

6.5mm ————

8.5mm BNET3285 BNET485 BNET585 BNET685

10mm BNET3210 BNET410 BNET510 BNET610

11.5mm BNET3211 BNET411 BNET511 BNET611

13mm BNET3213 BNET413 BNET513 BNET613

15mm BNET3215 BNET415 BNET515 BNET615

18mm ————

6.5mm ————

8.5mm BOET3285 BOET485 BOET585 BOET685

10mm BOET3210 BOET410 BOET510 BOET610

11.5mm BOET3211 BOET411 BOET511 BOET611

13mm BOET3213 BOET413 BOET513 BOET613

15mm BOET3215 BOET415 BOET515 BOET615

18mm ————

BOES365 BOES3765 BOES465 BOES565 BOES665

BOES385 BOES3785 BOES485 BOES585 BOES685

BOES310 BOES3710 BOES410 BOES510 BOES610

BOES311 BOES3711 BOES411 BOES511 BOES611

BOES313 BOES3713 BOES413 BOES513 BOES613

BOES315 BOES3715 BOES415 BOES515 BOES615

BOES318 BOES3718 BOES418 BOES518 BOES618

Cover Screw 1mm(H)

(included)

MMCS1 CS375 CS500 CS600 MMCS1 CS375 CS375 CS500 CS600

Cover Screw Headless CS275 CS275 CS275 CS275 CS275 CS275 CS275 CS275 CS275

1.25

1.9

3.4

2.5

2.4

2.7

4.1

2.7

3.2

2.7

3.9

1.25 1.25 1.25

3.4

1.15

2.5

.75 .5 .5

2.8

2.7 2.7 2.7

4.1 6

.75

2.8

2.7

4.1

3.1

Contemporary

Hybrid

Surface

External Hex Connection Implants

Tapered

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich.

Cover Screw 1mm(H)

(included)

MMCS1 CS375 CS500 CS600

Cover Screw Headless CS275 CS275 CS275 CS275

Full OSSEOTITE®Tapered

Length 3.25mm(D) 4mm(D) 5mm(D) 6mm(D)

8.5mm FNT3285 FNT485 FNT585 FNT685

10mm FNT3210 FNT410 FNT510 FNT610

11.5mm FNT3211 FNT411 FNT511 FNT611

13mm FNT3213 FNT413 FNT513 FNT613

15mm FNT3215 FNT415 FNT515 FNT615

Full

OSSEOTITE

Surface

Commercially Pure Titanium

Modified

Hybrid

OSSEOTITE

Surface

Length 3.25mm(D) 4mm(D) 5mm(D) 6mm(D) D)

8.5mm NT3285 NT485 NT585 NT685

10mm NT3210 NT410 NT510 NT610

11.5mm NT3211 NT411 NT511 NT611

13mm NT3213 NT413 NT513 NT613

15mm NT3215 NT415 NT515 NT615

OSSEOTITE Tapered

Commercially Pure Titanium

Cover Screw 1mm(H)

(included)

MMCS1 CS375 CS500 CS600

Cover Screw Headless CS275 CS275 CS275 CS275

3.4

1.25 1.25 1.25

2.5

2.4

2.7 2.7 2.7

4.1

1.25

1.9

1.25 1.25 1.25

2.4

.7 .7 1.25

1.9

3.4

2.5

2.7 2.7 2.7

4.1 6

3.2 3.9

External Hex Connection Implants

Parallel Walled

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 9

Full

OSSEOTITE

Surface

Commercially Pure Titanium

Parallel Walled

Length 3.25mm(D) 3.75mm(D) 4mm(D) 5mm(D) 6mm(D)

6.5mm XFOSM365 XFOS365 XFOS465 XFOS565 XFOS665

8.5mm XFOSM385 XFOS385 XFOS485 XFOS585 XFOS685

10mm XFOSM310 XFOS310 XFOS410 XFOS510 XFOS610

11.5mm XFOSM311 XFOS311 XFOS411 XFOS511 XFOS611

13mm XFOSM313 XFOS313 XFOS413 XFOS513 XFOS613

15mm XFOSM315 XFOS315 XFOS415 XFOS515 XFOS615

Cover Screw 1mm(H)

(included)

MMCS1 CS375 CS375 CS500 CS600

Cover Screw Headless CS275 CS275 CS275 CS275 CS275

3.4

1.15

.75 .5 .5

2.5

2.8

2.7 2.7 2.7

4.1 6

.75

2.8

2.7

4.1

3.1

2.4

NanoTite™ Parallel Walled

Modified

Hybrid

NanoTite

Surface

Length 3.25mm(D) 4mm(D) 5mm(D) 6mm(D)

7mm N/A NOSS407 NOSS507 NOSS607

8.5mm NOSM385 NOSS485 NOSS585 NOSS685

10mm NOSM310 NOSS410 NOSS510 NOSS610

11.5mm NOSM311 NOSS411 NOSS511 NOSS611

13mm NOSM313 NOSS413 NOSS513 NOSS613

15mm NOSM315 NOSS415 NOSS515 NOSS615

18mm NOSM318 NOSS418 NOSS518 NOSS618

Titanium Alloy

3.4

1.15

.75 .5 .5

2.5

2.4 2.6

2.7 2.7 2.7

4.1 6

4.1

Cover Screw 1mm(H)

(included)

MMCS1 CS375 CS500 CS600

Cover Screw Headless CS275 CS275 CS275 CS275

3.1

External Hex Connection Implants

Parallel Walled

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 10

Cover Screw 1mm(H)

(included)

MMCS1 CS375 CS375 CS500 CS600

Cover Screw Headless CS275 CS275 CS275 CS275 CS275

Full

OSSEOTITE

Surface

Commercially Pure Titanium

Full OSSEOTITE®Parallel Walled

Length 3.25mm(D) 3.75mm(D) 4mm(D) 5mm(D) 6mm(D)

7mm FOSM307 FOS307 FOS407 FOS507 FOS607

8.5mm FOSM385 FOS385 FOS485 FOS585 FOS685

10mm FOSM310 FOS310 FOS410 FOS510 FOS610

11.5mm FOSM311 FOS311 FOS411 FOS511 FOS611

13mm FOSM313 FOS313 FOS413 FOS513 FOS613

15mm FOSM315 FOS315 FOS415 FOS515 FOS615

All indicated measurements are in millimeters.

Hybrid

OSSEOTITE

Surface

Commercially Pure Titanium

OSSEOTITE Parallel Walled

Length

3.25mm(D)

3.75mm(D)

4mm(D) 5mm(D) 6mm(D)

7mm N/A N/A N/A OSS507 OSS607

8.5mm OSM385 OSS385 OSS485 OSS585 OSS685

10mm OSM310 OSS310 OSS410 OSS510 OSS610

11.5mm OSM311 OSS311 OSS411 OSS511 OSS611

13mm OSM313 OSS313 OSS413 OSS513 OSS613

15mm OSM315 OSS315 OSS415 OSS515 OSS615

18mm OSM318 OSS318 OSS418 OSS518 0SS618

20mm N/A OSS320 OSS420 N/A N/A

Cover Screw 1mm(H)

(included)

MMCS1 CS375 CS375 CS500 CS600

Cover Screw Headless CS275 CS275 CS275 CS275 CS275

3.4

1.15

.75 .5 .5

2.5

2.4

2.3 2.6

2.7 2.7 2.7

4.1 6

.75

2.7

4.1

3.4

1.15

.75 .5 .5

2.5

2.4

2.3 2.6

2.7 2.7 2.7

4.1 6

.75

2.7

4.1

3.1

Healing Abutments

Certain®Internal Connection

The BellaTek®Encode® Impression System

eliminates the need for an implant-level

impression while delivering a patient specific

restoration with appropriate margin height

and natural emergence contours for the

patient. This accuracy is achieved from an

impression of the BellaTek Encode

Healing Abutment.

Codes embedded on the occlusal surface of

the BellaTek Encode Healing Abutment

communicate the collar height, implant hex

orientation, platform diameter and interface

(the Certain Internal Connection or External

Hex Connection) of the implant.

Because the tissue is healed at the time of

impression, the margin should have the

appropriate placement and contour. The result

is a patient specific, anatomically designed,

final BellaTek Encode Abutment. Available in

titanium or with titanium nitride coating.

Optimization Is Key To Bellatek

Digital Dentistry Solutions

• Hard- And Soft-Tissue Maintenance

• Customized Treatment Solutions

• Practice Growth

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 12

Healing Abutments

Certain®Internal Connection

5mm(D) Seating Surface

4.1mm(D) Seating Surface

Seating Surface

3.4mm(D)

68°

4.1

3.4

5.6

45°

6.8

35°

55°

Encode®Two-Piece

Emergence Profile Collar Height Item Numbers

3.8mm 3mm IEHA343

3.8mm 4mm IEHA344

3.8mm 6mm IEHA346

3.8mm 8mm IEHA348

5mm 3mm IEHA353

5mm 4mm IEHA354

5mm 6mm IEHA356

5mm 8mm IEHA358

4.1mm 3mm IEHA443

4.1mm 4mm IEHA444

4.1mm 6mm IEHA446

4.1mm 8mm IEHA448

5mm 3mm IEHA453

5mm 4mm IEHA454

5mm 6mm IEHA456

5mm 8mm IEHA458

6mm 3mm IEHA463

6mm 4mm IEHA464

6mm 6mm IEHA466

6mm 8mm IEHA468

Emergence Profile Collar Height Item Numbers

5.6mm 3mm IEHA553

5.6mm 4mm IEHA554

5.6mm 6mm IEHA556

5.6mm 8mm IEHA558

6mm 3mm IEHA563

6mm 4mm IEHA564

6mm 6mm IEHA566

6mm 8mm IEHA568

Emergence Profile Collar Height Item Numbers

6.8mm 3mm IEHA663

6.8mm 4mm IEHA664

6.8mm 6mm IEHA666

6.8mm 8mm IEHA668

Emergence Profile Collar Height Item Numbers

Occlusal markings provide scanner

information for abutment design.

6mm(D) Seating Surface

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 13

EP (Emergence Profile)

Height

Restorative Platform

Healing Abutments

Certain®Internal Connection

3.8

60°

4.1

65°

90°

4.1

90°

45°

3.4

4.1mm(D) Seating Surface

Seating Surface

3.4mm(D)

Emergence Profile Collar Height Item Numbers

4.1mm 2mm ISHA42

4.1mm 3mm ISHA43

4.1mm 4mm ISHA44

4.1mm 6mm ISHA46

4.1mm 8mm ISHA48

5mm 2mm ITHA52

5mm 3mm ITHA53

5mm 4mm ITHA54

5mm 6mm ITHA56

5mm 8mm ITHA58

6mm 3mm ITHA63

6mm 4mm ITHA64

6mm 6mm ITHA66

6mm 8mm ITHA68

EP®One-Piece

Emergence Profile Collar Height Item Numbers

3.4mm 2mm ISMHA32

3.4mm 3mm ISMHA33

3.4mm 4mm ISMHA34

3.4mm 6mm ISMHA36

3.8mm 2mm IMHA32

3.8mm 3mm IMHA33

3.8mm 4mm IMHA34

3.8mm 6mm IMHA36

5mm 2mm IMHA352

5mm 3mm IMHA353

5mm 4mm IMHA354

5mm 6mm IMHA356

3.4

63°

Healing Abutments

Certain®Internal Connection

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 14

90°

5.6

45°

35°

Seating Surface

5mm(D)

EP®One-Piece

Emergence Profile Collar Height Item Numbers

5mm 2mm ISWHA52

5mm 3mm ISWHA53

5mm 4mm ISWHA54

5mm 6mm ISWHA56

5mm 8mm ISWHA58

5.6mm 2mm IWTH52

5.6mm 3mm IWTH53

5.6mm 4mm IWTH54

5.6mm 6mm IWTH56

5.6mm 8mm IWTH58

6mm 2mm IWTH562

6mm 3mm IWTH563

6mm 4mm IWTH564

6mm 6mm IWTH566

6mm 8mm IWTH568

35°

6.8

Seating Surface

6mm(D)

Emergence Profile Collar Height Item Numbers

6mm 2mm ISWHA62

6mm 3mm ISWHA63

6mm 4mm ISWHA64

6mm 6mm ISWHA66

6mm 8mm ISWHA68

6.8mm 2mm IWTH62

6.8mm 3mm IWTH63

6.8mm 4mm IWTH64

6.8mm 6mm IWTH66

6.8mm 8mm IWTH68

90° h

Occlusal markings provide scanner

information for abutment design.

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 15

Healing Abutments

External Hex Connection

4.1mm(D) Seating Surface

Seating Surface

3.4mm(D)

Emergence Profile Collar Height Item Numbers

4.1

68°

3.4

55°

Encode®Two-Piece

Emergence Profile Collar Height Item Numbers

3.8mm 3mm EHA343

3.8mm 4mm EHA344

3.8mm 6mm EHA346

3.8mm 8mm EHA348

5mm 3mm EHA353

5mm 4mm EHA354

5mm 6mm EHA356

5mm 8mm EHA358

4.1mm 3mm EHA443

4.1mm 4mm EHA444

4.1mm 6mm EHA446

4.1mm 8mm EHA448

5mm 3mm EHA453

5mm 4mm EHA454

5mm 6mm EHA456

5mm 8mm EHA458

6mm 3mm EHA463

6mm 4mm EHA464

6mm 6mm EHA466

6mm 8mm EHA468

6mm(D) Seating Surface

5mm(D) Seating Surface

Emergence Profile Collar Height Item Numbers

5.6mm 3mm EHA553

5.6mm 4mm EHA554

5.6mm 6mm EHA556

5.6mm 8mm EHA558

6mm 3mm EHA563

6mm 4mm EHA564

6mm 6mm EHA566

6mm 8mm EHA568

6.8mm 3mm EHA663

6.8mm 4mm EHA664

6.8mm 6mm EHA666

6.8mm 8mm EHA668

5.6

45°

6.8

35°

All indicated measurements are in millimeters.

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 16

Seating Surface

6mm(D)

EP (Emergence Profile)

Height

Restorative Platform

3.8

4.1

60°

65°

90°

45°

35°

45°

3.4

4.1mm(D) Seating Surface

Seating Surface

3.4mm(D)

Seating Surface

5mm(D)

Emergence Profile Collar Height Item Numbers

5.6mm 2mm WTH52

5.6mm 3mm WTH53

5.6mm 4mm WTH54

5.6mm 6mm WTH56

5.6mm 8mm WTH58

6mm 2mm WTH562

6mm 3mm WTH563

6mm 4mm WTH564

6mm 6mm WTH566

6mm 8mm WTH568

Emergence Profile Collar Height Item Numbers

5.6

THRC4

Temporary Healing Retention Cylinder

Retains denture with soft tissue liner.

4.1mm(D) x 4mm(H)

THRC6

4.1mm(D) x 6mm(H)

4.1mm 2mm THA42

4.1mm 3mm THA43

4.1mm 4mm THA44

4.1mm 6mm THA46

4.1mm 8mm THA48

5mm 2mm THA52

5mm 3mm THA53

5mm 4mm THA54

5mm 6mm THA56

5mm 8mm THA58

6mm 3mm THA63

6mm 4mm THA64

6mm 6mm THA66

6mm 8mm THA68

35°

6.8

Emergence Profile Collar Height Item Numbers

6.8mm 2mm WTH62

6.8mm 3mm WTH63

6.8mm 4mm WTH64

6.8mm 6mm WTH66

6.8mm 8mm WTH68

EP®One-Piece

Emergence Profile Collar Height Item Numbers

3.8mm 2mm MHA32

3.8mm 3mm MHA33

3.8mm 4mm MHA34

3.8mm 6mm MHA36

Healing Abutments

External Hex Connection

Site Preparation Technologies

The Navigator®System For Guided

Surgery

The Navigator System helps clinicians transform computer-based

planning into practical implant placement with an opportunity for

immediate provisionalization.

The Navigator System enables placement and restoration of the

following Tapered and Parallel Walled Implant Systems:

• Tapered/Parallel Walled Certain®3.25, 4 and 5mm Implants

• Certain PREVAIL®3/4/3, 4/3, 4/5/4 and 5/4 Implants

• Certain Tapered PREVAIL 4/3 and 5/4 Implants

Features specific to the Navigator System include:

• Depth-specific instrumentation for preparation and implant placement

• Control of hex-orientation to fabricate and deliver provisional

restorations immediately following implant placement

• Open architecture compatibility that provides freedom to choose

among leading planning software solutions

DU1000 & OSSEOCISION®Surgical

Drilling Units

Both DU1000 and OSSEOCISION Surgical Drilling Units accept twist

drills, shaping drills and implant drivers. The units power these

instruments in order to create the osteotomy for implant placement.

• Ergonomic handpiece design

• Customized programs for every stage of dental implant surgical

procedures

• Foot control for hands-free program and setting selections

DU1000 is manufactured by W&H Dentalwerk Bürmoos GmbH .

OSSEOCISION is manufactured by NSK Nakanishi Inc.

Tapered Navigator Surgical Kit

OSSEOCISION Surgical Drilling Unit

DU1000 Surgical Drilling Unit

Product Overview

Parallel Walled Navigator Surgical Kit

Site Preparation Technologies

Advanced Cutting Technology®(ACT®)

Drills

• Two-flute design for efficient cutting

• Alternating lines and bands enhance depth mark visibility and drill

orientation in the osteotomy

• Matte finish to reduce glare

Tapered Implant Depth Indicators

& Quad Shaping Drills

• Tapered Implant Depth Indicators (NTDIs) verify the position of the

implant platform prior to placement

• Quad Shaping Drills (QSDs) use stepped depth marks for accuracy

in creating the osteotomy

• QSDs have end cutting ability

• Both QSDs and NTDIs are color-coded for platform recognition

Summers Osteotomes & Tapered

Osteotomes

• Summers Osteotomes for use with parallel walled implants

• Tapered Osteotomes available in straight and angled designs for use

with tapered implants

• Matte finished tip surface to reduce glare

• Ball striking end to facilitate use of a mallet

High Torque Indicating Ratchet Wrench

(H-TIRW)

• The H-TIRW doubles as a conventional ratchet wrench to place

implants and as a torque indicator to provided a visual assessment

of torque.

• Clearly indicates forward and reverse torque of 50-90Ncm without

the need for additional components.

• Does not require lubrication or periodic re-calibration. Calibration

may be checked by verifying that the arrow is positioned at the first

scale mark (0Ncm).

• Consisting of only two parts, the H-TIRW is easy to prepare for

sterilization.

Product Overview

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 19

Description Item Numbers

DU1000 Surgical Drilling Unit

115 volt DU1000US

230 volt DU1000EU*

Accessories Included With The DU1000:

Micromotor With Cable - 1.8m/5.9ft motor cable plugs into console and attaches to handpiece DU1KMC

Motor/Handpiece Support - Drill unit attachment for resting handpiece DU1KHS

Foot Control - Ergonomic design, variable speed and connects to console to provide foot activation DU1KFC

Handle For Foot Control - Foot control attachment allowing for repositioning of foot control DU1KH1

Irrigation Bag Stand - Stand for irrigation solution bag DU9IBS

Circuit Fuse - Fuse for console, T1.25AH (250 volt) DU9F

Motor Protective Cover - Component placed over the end of a DU1KMC before cleaning and

disinfection and for sterilization in sterilizers without a drying program DU9SP

Locking Pin - Prevents handpiece on the motor attachment from turning during transmission DU9LP

Disposable Irrigation Tubing Set (6-piece) - For the supply of irrigation fluid DU1KIT

Spray Cap With Nozzle - Spray cap for service oil DU9SC

Bur Testing Gauge - Verifies bur/drill shank diameter DU9BG

Irrigation Tube Clamps (5-pack) - Clamps holding irrigation tubing to motor cable (DU9MC) DU9CL

Electrical Power Cord (United States, Canada, Japan) -

Connects to console and appropriate wall outlet

DU9PCUS

Electrical Power Cord (European Union) - Connects to console and appropriate wall outlet DU9PCEU*

Electrical Power Cord (Switzerland) - Connects to console and appropriate wall outlet DU1KPCCH*

Electrical Power Cord (Denmark) - Connects to console and appropriate wall outlet DU1KPCDK*

Electrical Power Cord (United Kingdom, Ireland) - Connects to console and appropriate wall outlet DU9PCUK*

Electrical Power Cord (Australia, New Zealand) - Connects to console and appropriate wall outlet DU9PCAU*

The following items are not included with the DU1000 Surgical Drilling Unit, but can be ordered separately through

Customer Service.

20:1 Handpiece - WS-75 E/KM Gear reduction handpiece DU9WS75

20:1 Handpiece - WI-75 LED G Gear reduction handpiece with built-in LED light DU9WI75L

Nozzle Cleaner - Cleans coolant outlets of handpieces; included with handpiece DU9NC

Y-Connector (3-pack) - Used to bifurcate irrigate flow from irrigation tube, DU1KIT, to provide both

internal and external irrigation; included with handpiece DU9YC

DU1000 Surgical Drilling Unit

*Not available in the United States.

All accessories listed are compatible with both the DU900 and

DU1000 except for DU1KMC, DU1KHS, DU1KFC and DU1KH1.

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 20

Description Item Numbers

OSSEOCISION Surgical Drilling Unit

120 volt DS100US

100 volt DS100J*

230 volt DS100RW*

Accessories Included With The OSSEOCISION Surgical Drilling Unit:

Tube Clamp - Holds irrigation tubing to motor cord C202-750

Internal Irrigation Tube - “L” shaped tube that fits through the handpiece head and connects the

irrigation tubing and an internally irrigated component C293-025

Y-Connector - Used to bifurcate irrigate flow from irrigation tube to provide both internal

and external irrigation C823-752

Micromotor With Cord - Plugs into DS100 Console and attaches to handpiece E211-001

Autoclave Plug For Motor - Used to keep moisture from entering micromotor during sterilization E211-701

20:1 Handpiece - 20:1 Gear Reduction Handpiece for the drilling unit SGQ-ER20H

Fuse (100V/120V) - Circuit fuse for DS100 Console (110–130 volt) U195-152

Fuse (230V) - Circuit fuse for DS100 Console (230 volt) U197-152*

Coolant Solution Hanger Post - Suspends irrigation bag or bottle from console U370-152

Control Unit (100V) - DS100J Console U370-003*

Control Unit (120V) - DS100US Console U371-003

Control Unit (230V) - DS100RW Console U372-003*

Electrical Power Cord (100V) - Plugs into DS100J Console and appropriate wall outlet U389-013*

Electrical Power Cord (120V) - Plugs into DS100US Console and appropriate wall outlet U371-550

Electrical Power Cord (230V Europe) - Plugs into DS100RW Console and appropriate wall outlet U260-414*

Electrical Power Cord (230V Australia) - Plugs into DS100RW Console and appropriate wall outlet U198-013*

Irrigation Tube Holder - Holds irrigation tubing to handpiece Y900-083

Irrigation Tubing, Disposable/Clear (5-pack) - Connects between irrigation bag or bottle and For re-ordering,

handpiece to provide irrigation flow refer to Y900-114.

Motor Cradle - Supports handpiece when not in use Z095-102

Handpiece Wench - Used to disassemble handpiece Z103-101

Spray Lubricant Nozzle - Attaches to lubricant to lubricate handpiece Z114-090

Nozzle Cleaning Fine Wire - Used to clean handpiece irrigation tube Z144-095

Foot Control (3.5m) - Connects to DS100 Console to provide foot activation Z272-004

The following items are not included in the OSSEOCISION Surgical Drilling Unit, but can be ordered separately through

Customer Service.

Motor Cord - Plugs into DS100 Console and attaches to handpiece E211-051

Irrigation Tubing, Disposable/Clear (10-pack) - Connects between irrigation bag or bottle and

handpiece to provide irrigation flow Y900-114

OSSEOCISION®Surgical Drilling Unit

*Not available in the United States. Refer to ART984 for the OSSEOCISION Warranty.

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 21

SGTIKIT Tapered Navigator Surgical Kit

SGTIKIT Description Item Numbers

Surgical Kit

• Tapered Navigator Surgical Tray SGTTRAY

• Tapered Navigator Tissue Punch, 4.1mm(D) SGTTP4

• Tapered Navigator Tissue Punch, 5mm(D) SGTTP5

• Tapered Navigator Cortical Perforator, 4.1mm(D) - Short SGTCP4S

• Tapered Navigator Cortical Perforator, 4.1mm(D) - Long SGTCP4L

• Tapered Navigator Cortical Perforator, 5mm(D) - Short SGTCP5S

• Tapered Navigator Cortical Perforator, 5mm(D) - Long SGTCP5L

• Tapered Navigator Twist Drill, 1.9mm(D) x A(L) SGTD19A

• Tapered Navigator Twist Drill, 1.9mm(D) x B(L) SGTD19B

• Tapered Navigator Twist Drill, 1.9mm(D) x C(L) SGTD19C

• Tapered Navigator Twist Drill, 1.9mm(D) x D(L) SGTD19D

• Tapered Navigator Twist Drill, 1.9mm(D) x E(L) SGTD19E

• Tapered Navigator Twist Drill, 1.9mm(D) x F(L) SGTD19F

• Tapered Navigator Twist Drill, 1.9mm(D) x G(L) SGTD19G

• Tapered Navigator Countersink Drill, 3.4mm(D) - Short MSGTCDS

• Tapered Navigator Countersink Drill, 4.1mm(D) - Short SGTCD4S

• Tapered Navigator Countersink Drill, 5mm(D) - Short SGTCD5S

• Tapered Navigator Countersink Drill, 3.4mm(D) - Long MSGTCDL

• Tapered Navigator Countersink Drill, 4.1mm(D) - Long SGTCD4L

• Tapered Navigator Countersink Drill, 5mm(D) - Long SGTCD5L

• Tapered Navigator Shaping Drill, 3.25mm(D) x 8.5mm(L) - Short MSGTD85S

• Tapered Navigator Shaping Drill, 3.25mm(D) x 10mm(L) - Short MSGTD10S

• Tapered Navigator Shaping Drill, 3.25mm(D) x 11.5mm(L) - Short MSGTD11S

• Tapered Navigator Shaping Drill, 3.25mm(D) x 13mm(L) - Short MSGTD13S

• Tapered Navigator Shaping Drill, 3.25mm(D) x 15mm(L) - Short MSGTD15S

• Tapered Navigator Shaping Drill, 4.1mm(D) x 8.5mm(L) - Short SGTD485S

• Tapered Navigator Shaping Drill, 4.1mm(D) x 10mm(L) - Short SGTD410S

• Tapered Navigator Shaping Drill, 4.1mm(D) x 11.5mm(L) - Short SGTD411S

• Tapered Navigator Shaping Drill, 4.1mm(D) x 13mm(L) - Short SGTD413S

• Tapered Navigator Shaping Drill, 4.1mm(D) x 15mm(L) - Short SGTD415S

• Tapered Navigator Shaping Drill, 5mm(D) x 8.5mm(L) - Short SGTD585S

For Tapered Implants Including:

• Tapered Certain®3.25, 4 and 5mm Implants

• Tapered PREVAIL®4/3 and 5/4 Implants

Tapered Navigator®System

For Guided Surgery

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 22

SGTIKIT Description Item Numbers

Surgical Kit

•Tapered Navigator®Shaping Drill, 5mm(D) x 10mm(L) - Short SGTD510S

• Tapered Navigator Shaping Drill, 5mm(D) x 11.5mm(L) - Short SGTD511S

• Tapered Navigator Shaping Drill, 5mm(D) x 13mm(L) - Short SGTD513S

• Tapered Navigator Shaping Drill, 5mm(D) x 15mm(L) - Short SGTD515S

• Tapered Navigator Shaping Drill, 3.25mm(D) x 8.5mm(L) - Long MSGTD85L

• Tapered Navigator Shaping Drill, 3.25mm(D) x 10mm(L) - Long MSGTD10L

• Tapered Navigator Shaping Drill, 3.25mm(D) x 11.5mm(L) - Long MSGTD11L

• Tapered Navigator Shaping Drill, 3.25mm(D) x 13mm(L) - Long MSGTD13L

• Tapered Navigator Shaping Drill, 3.25mm(D) x 15mm(L) - Long MSGTD15L

• Tapered Navigator Shaping Drill, 4.1mm(D) x 8.5mm(L) - Long SGTD485L

• Tapered Navigator Shaping Drill, 4.1mm(D) x 10mm(L) - Long SGTD410L

• Tapered Navigator Shaping Drill, 4.1mm(D) x 11.5mm(L) - Long SGTD411L

• Tapered Navigator Shaping Drill, 4.1mm(D) x 13mm(L) - Long SGTD413L

• Tapered Navigator Shaping Drill, 4.1mm(D) x 15mm(L) - Long SGTD415L

• Tapered Navigator Shaping Drill, 5mm(D) x 8.5mm(L) - Long SGTD585L

• Tapered Navigator Shaping Drill, 5mm(D) x 10mm(L) - Long SGTD510L

• Tapered Navigator Shaping Drill, 5mm(D) x 11.5mm(L) - Long SGTD511L

• Tapered Navigator Shaping Drill, 5mm(D) x 13mm(L) - Long SGTD513L

• Tapered Navigator Shaping Drill, 5mm(D) x 15mm(L) - Long SGTD515L

• Tapered Navigator Twist Drill Positioning Handle SGTDPHT

• Tapered Navigator Reduction Drill Positioning Handle SGTDPHR

• Handpiece Connector MDR10

• Narrow Right Angle Large Hexed Driver Tip, 24mm(L) RASH3N

• Posterior Large Hexed Driver, 17mm(L) PHD02N

• Ratchet Extension, 6mm(L) - Short RE100

• Ratchet Extension, 15mm(L) - Long RE200

• Ratchet Wrench WR150

• Open End Wrench CW100

• Navigator Certain®Implant Mount, 3.4mm(D) - Short MSGIIMS

• Navigator Certain Implant Mount, 3.4mm(D) - Long MSGIIML

• Navigator Certain Implant Mount, 4.1mm(D) - Short SGIIM4S

• Navigator Certain Implant Mount, 4.1mm(D) - Long SGIIM4L

• Navigator Certain Implant Mount, 5mm(D) - Short SGIIM5S

• Navigator Certain Implant Mount, 5mm(D) - Long SGIIM5L

• Certain Manual Bone Profiler, 3.4mm(D) x 4.1mm(P) IMMBP

• Certain Manual Bone Profiler, 4.1mm(D) x 5mm(P) IMBP4

• Certain Manual Bone Profiler, 5mm(D) x 6mm(P) IMBP5

Surgical Kit Cont’d

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 23

SGTIKIT Description Item Numbers

Surgical Kit

• Tapered Navigator Bone Tap Tray SGTTAPT

• Tapered Navigator Bone Tap, 3.25mm(D) x 8.5mm(L) - Short MSGTT85S

• Tapered Navigator Bone Tap, 3.25mm(D) x 10mm(L) - Short MSGTT10S

• Tapered Navigator Bone Tap, 3.25mm(D) x 11.5mm(L) - Short MSGTT11S

• Tapered Navigator Bone Tap, 3.25mm(D) x 13mm(L) - Short MSGTT13S

• Tapered Navigator Bone Tap, 3.25mm(D) x 15mm(L) - Short MSGTT15S

• Tapered Navigator Bone Tap, 4.1mm(D) x 8.5mm(L) - Short SGTT485S

• Tapered Navigator Bone Tap, 4.1mm(D) x 10mm(L) - Short SGTT410S

• Tapered Navigator Bone Tap, 4.1mm(D) x 11.5mm(L) - Short SGTT411S

• Tapered Navigator Bone Tap, 4.1mm(D) x 13mm(L) - Short SGTT413S

• Tapered Navigator Bone Tap, 4.1mm(D) x 15mm(L) - Short SGTT415S

• Tapered Navigator Bone Tap, 5mm(D) x 8.5mm(L) - Short SGTT585S

• Tapered Navigator Bone Tap, 5mm(D) x 10mm(L) - Short SGTT510S

• Tapered Navigator Bone Tap, 5mm(D) x 11.5mm(L) - Short SGTT511S

• Tapered Navigator Bone Tap, 5mm(D) x 13mm(L) - Short SGTT513S

• Tapered Navigator Bone Tap, 5mm(D) x 15mm(L) - Short SGTT515S

• Tapered Navigator Bone Tap, 3.25mm(D) x 8.5mm(L) - Long MSGTT85L

• Tapered Navigator Bone Tap, 3.25mm(D) x 10mm(L) - Long MSGTT10L

• Tapered Navigator Bone Tap, 3.25mm(D) x 11.5mm(L) - Long MSGTT11L

• Tapered Navigator Bone Tap, 3.25mm(D) x 13mm(L) - Long MSGTT13L

• Tapered Navigator Bone Tap, 3.25mm(D) x 15mm(L) - Long MSGTT15L

• Tapered Navigator Bone Tap, 4.1mm(D) x 8.5mm(L) - Long SGTT485L

• Tapered Navigator Bone Tap, 4.1mm(D) x 10mm(L) - Long SGTT410L

• Tapered Navigator Bone Tap, 4.1mm(D) x 11.5mm(L) - Long SGTT411L

• Tapered Navigator Bone Tap, 4.1mm(D) x 13mm(L) - Long SGTT413L

• Tapered Navigator Bone Tap, 4.1mm(D) x 15mm(L) - Long SGTT415L

• Tapered Navigator Bone Tap, 5mm(D) x 8.5mm(L) - Long SGTT585L

• Tapered Navigator Bone Tap, 5mm(D) x 10mm(L) - Long SGTT510L

• Tapered Navigator Bone Tap, 5mm(D) x 11.5mm(L) - Long SGTT511L

• Tapered Navigator Bone Tap, 5mm(D) x 13mm(L) - Long SGTT513L

• Tapered Navigator Bone Tap, 5mm(D) x 15mm(L) - Long SGTT515L

For Tapered Implants Including:

• Certain®3.25, 4 and 5mm Implants

• Tapered PREVAIL®4/3 and 5/4 Implants

Tapered Navigator®System

For Guided Surgery

Tapered Navigator Tap Kit

(Included under SGTIKIT)

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 24

SGTILKIT

SGTILKIT Description Item Numbers

Surgical Kit

• Tapered Navigator Laboratory Tray SGTLTRAY

• Navigator Certain Analog Mount, 3.4mm(D) - Short MSGIAMS

• Navigator Certain Analog Mount, 4.1mm(D) - Short SGIAM4S

• Navigator Certain Analog Mount, 5mm(D) - Short SGIAM5S

• Navigator Certain Analog Mount, 3.4mm(D) - Long MSGIAML

• Navigator Certain Analog Mount, 4.1mm(D) - Long SGIAM4L

• Navigator Certain Analog Mount, 5mm(D) - Long SGIAM5L

For Tapered Implants Including:

• Certain®3.25, 4 and 5mm Implants

• Tapered PREVAIL®4/3 and 5/4 Implants

Tapered Navigator®System

For Guided Surgery

Tapered Navigator Laboratory Kit

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 25

SGKIT Navigator Parallel Walled Surgical Kit

SGKIT Description Item Numbers

Surgical Kit

• Navigator Surgical Tray SGTRAY

• Navigator Tissue Punch, 4.1mm(D) SGTP4

• Navigator Tissue Punch, 5mm(D) SGTP5

• Navigator Starter Drill, 3.4mm(D) MSGSD

• Navigator Starter Drill, 3/4mm(D) SGSD34

• Navigator Starter Drill, 4.1mm(D) SGSD4

• Navigator Starter Drill, 4/5mm(D) SGSD45

• Navigator Certain Starter Drill, 5mm(D) SGISD5

• Navigator Twist Drill, 2mm(D) x A(L) SGD2A

• Navigator Twist Drill, 2mm(D) x B(L) SGD2B

• Navigator Twist Drill, 2mm(D) x C(L) SGD2C

• Navigator Twist Drill, 2mm(D) x D(L) SGD2D

• Navigator Twist Drill, 2mm(D) x E(L) SGD2E

• Navigator Twist Drill, 2.75mm(D) x A(L) SGD275A

• Navigator Twist Drill, 2.75mm(D) x B(L) SGD275B

• Navigator Twist Drill, 2.75mm(D) x C(L) SGD275C

• Navigator Twist Drill, 2.75mm(D) x D(L) SGD275D

• Navigator Twist Drill, 2.75mm(D) x E(L) SGD275E

• Navigator Twist Drill, 3mm(D) x A(L) SGD3A

• Navigator Twist Drill, 3mm(D) x B(L) SGD3B

• Navigator Twist Drill, 3mm(D) x C(L) SGD3C

• Navigator Twist Drill, 3mm(D) x D(L) SGD3D

• Navigator Twist Drill, 3mm(D) x E(L) SGD3E

• Navigator Twist Drill, 3.25mm(D) x A(L) SGD325A

• Navigator Twist Drill, 3.25mm(D) x B(L) SGD325B

• Navigator Twist Drill, 3.25mm(D) x C(L) SGD325C

• Navigator Twist Drill, 3.25mm(D) x D(L) SGD325D

• Navigator Twist Drill, 3.25mm(D) x E(L) SGD325E

• Navigator Twist Drill, 3.85mm(D) x A(L) SGD385A

• Navigator Twist Drill, 3.85mm(D) x B(L) SGD385B

• Navigator Twist Drill, 3.85mm(D) x C(L) SGD385C

• Navigator Twist Drill, 4.25mm(D) x A(L) SGD425A

For Parallel Walled Implants Including:

• Certain®3.25, 4 and 5mm Implants

• PREVAIL®3/4/3 and 4/5/4 Implants

• OSSEOTITE XP®4/5 Implants

• Straight PREVAIL 4/3 and 5/4 Implants

Parallel Walled

Navigator®System

For Guided Surgery

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 26

SGKIT Description Item Numbers

Surgical Kit

• Navigator®Twist Drill, 4.25mm(D) x B(L) SGD425B

• Navigator Twist Drill, 4.25mm(D) x C(L) SGD425C

• Navigator Bone Tap, 3.25mm(D) MSGTAP

•Navigator Bone Tap, 4.1mm(D) SGTAP4

• Navigator Bone Tap, 4/5mm(D) SGTAP45

• Navigator Bone Tap, 5mm(D) SGTAP5

• Navigator Drill Positioning Handle 1 SGDPH1

• Navigator Drill Positioning Handle 2 SGDPH2

• Navigator Drill Positioning Handle 3 SGDPH3

• Navigator Drill Positioning Handle 4 SGDPH4

• Navigator Drill Positioning Handle 5 SGDPH5

• Certain®Manual Bone Profiler, 3.4mm(D) x 4.1mm(P) IMMBP

• Certain Manual Bone Profiler, 4.1mm(D) x 5mm(P) IMBP4

• Certain Manual Bone Profiler, 5mm(D) x 6mm(P) IMBP5

• Narrow Right Angle Large Hexed Driver Tip, 24mm(L) RASH3N

• Open End Wrench CW100

• Ratchet Wrench WR150

• Handpiece Connector MDR10

• Posterior Large Hexed Driver, 17mm(L) PHD02N

• Ratchet Extension - Short, 6mm(L) RE100

• Ratchet Extension - Long, 15mm(L) RE200

• Navigator Certain Implant Mount, 3.4mm(D) x 1(L) MSGIIM1

• Navigator Certain Implant Mount, 3.4mm(D) x 2(L) MSGIIM2

• Navigator Certain Implant Mount, 3.4mm(D) x 3(L) MSGIIM3

• Navigator Certain Implant Mount, 3.4mm(D) x 4(L) MSGIIM4

• Navigator Certain Implant Mount, 4.1mm(D) x 1(L) SGIIM41

• Navigator Certain Implant Mount, 4.1mm(D) x 2(L) SGIIM42

• Navigator Certain Implant Mount, 4.1mm(D) x 3(L) SGIIM43

• Navigator Certain Implant Mount, 4.1mm(D) x 4(L) SGIIM44

• Navigator Certain Implant Mount, 5mm(D) x 1(L) SGIIM51

• Navigator Certain Implant Mount, 5mm(D) x 2(L) SGIIM52

• Navigator Certain Implant Mount, 5mm(D) x 3(L) SGIIM53

• Navigator Certain Implant Mount, 5mm(D) x 4(L) SGIIM54

The following items are not included in the Navigator Surgical Kit, but can be ordered separately, as needed, through

Customer Service.

Navigator Twist Drill, 2mm(D) x Y(L) SGD2Y

Navigator Twist Drill, 2mm(D) x Z(L) SGD2Z

Navigator Twist Drill, 2.75mm(D) x Y(L) SGD275Y

Navigator Twist Drill, 2.75mm(D) x Z(L) SGD275Z

Navigator Twist Drill, 3mm(D) x Y(L) SGD3Y

Navigator Twist Drill, 3mm(D) x Z(L) SGD3Z

Navigator Twist Drill, 3.25mm(D) x Y(L) SGD325Y

Navigator Twist Drill, 3.25mm(D) x Z(L) SGD325Z

Navigator Twist Drill, 3.85mm(D) x Y(L) SGD385Y

Navigator Twist Drill, 3.85mm(D) x Z(L) SGD385Z

Navigator Twist Drill, 4.25mm(D) x Y(L) SGD425Y

Navigator Twist Drill, 4.25mm(D) x Z(L) SGD425Z

Description Item Numbers Description Item Numbers

Surgical Kit Cont’d

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 27

SGLKIT Navigator Parallel Walled Laboratory Kit

SGLKIT Description Item Numbers

Laboratory Kit

• Navigator Laboratory Tray SGLTRAY

• Navigator Certain®Analog Mount, 3.4mm(D) x 1(L) MSGIAM1

• Navigator Certain Analog Mount, 3.4mm(D) x 2(L) MSGIAM2

• Navigator Certain Analog Mount, 3.4mm(D) x 3(L) MSGIAM3

• Navigator Certain Analog Mount, 3.4mm(D) x 4(L) MSGIAM4

• Navigator Certain Analog Mount, 4.1mm(D) x 1(L) SGIAM41

• Navigator Certain Analog Mount, 4.1mm(D) x 2(L) SGIAM42

• Navigator Certain Analog Mount, 4.1mm(D) x 3(L) SGIAM43

• Navigator Certain Analog Mount, 4.1mm(D) x 4(L) SGIAM44

• Navigator Certain Analog Mount, 5mm(D) x 1(L) SGIAM51

• Navigator Certain Analog Mount, 5mm(D) x 2(L) SGIAM52

• Navigator Certain Analog Mount, 5mm(D) x 3(L) SGIAM53

• Navigator Certain Analog Mount, 5mm(D) x 4(L) SGIAM54

31-3100 BIOMET 2mm Fixation System

To order, call 1-800-874-7711

www.BiometMicrofixation.com

Parallel Walled

Navigator®System

For Guided Surgery

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 28

QNTSK40 Premium Kit

SLIMKTE

SLIMKT Slim Kit - Certain®

Slim Kit - Certain

& External Hex

Tapered Implant Surgical Kits

QNTSK20 QNTSK40U QNTSK40

Certain Certain/External Hex Starter (Basic) Kit Upgrade Kit Premium Kit Description Item Numbers

•• ••Quad Shaping Drill, 3.25mm(D) x 8.5mm(L) QSD3285

•••••Quad Shaping Drill, 3.25mm(D) x 10mm(L) QSD3210

•••••Quad Shaping Drill, 3.25mm(D) x 11.5mm(L) QSD3211

•••••Quad Shaping Drill, 3.25mm(D) x 13mm(L) QSD3213

••Quad Shaping Drill, 3.25mm(D) x 15mm(L) QSD3215

•• ••Quad Shaping Drill, 4mm(D) x 8.5mm(L) QSD485

•••••Quad Shaping Drill, 4mm(D) x 10mm(L) QSD410

•••••Quad Shaping Drill, 4mm(D) x 11.5mm(L) QSD411

•••••Quad Shaping Drill, 4mm(D) x 13mm(L) QSD413

••Quad Shaping Drill, 4mm(D) x 15mm(L) QSD415

••Quad Shaping Drill, 5mm(D) x 8.5mm(L) QSD585

•••Quad Shaping Drill, 5mm(D) x 10mm(L) QSD510

•••Quad Shaping Drill, 5mm(D) x 11.5mm(L) QSD511

•••Quad Shaping Drill, 5mm(D) x 13mm(L) QSD513

••Quad Shaping Drill, 5mm(D) x 15mm(L) QSD515

••Quad Shaping Drill, 6mm(D) x 8.5mm(L) QSD685

••Quad Shaping Drill, 6mm(D) x 10mm(L) QSD610

••Quad Shaping Drill, 6mm(D) x 11.5mm(L) QSD611

••Quad Shaping Drill, 6mm(D) x 13mm(L) QSD613

••Quad Shaping Drill, 6mm(D) x 15mm(L) QSD615

•• ••Dense Bone Tap, 3.25mm(D) x 8.5mm(L) NTAP3285

•••••Dense Bone Tap, 3.25mm(D) x 10mm(L) NTAP3210

•••••Dense Bone Tap, 3.25mm(D) x 11.5mm(L) NTAP3211

•••••Dense Bone Tap, 3.25mm(D) x 13mm(L) NTAP3213

••Dense Bone Tap, 3.25mm(D) x 15mm(L) NTAP3215

•• ••Dense Bone Tap, 4mm(D) x 8.5mm(L) NTAP485

•••••Dense Bone Tap, 4mm(D) x 10mm(L) NTAP410

•••••Dense Bone Tap, 4mm(D) x 11.5mm(L) NTAP411

•••••Dense Bone Tap, 4mm(D) x 13mm(L) NTAP413

••Dense Bone Tap, 4mm(D) x 15mm(L) NTAP415

••Dense Bone Tap, 5mm(D) x 8.5mm(L) NTAP585

•••Dense Bone Tap, 5mm(D) x 10mm(L) NTAP510

SLIMKTESLIMKT

New!

(pictured)

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 29

Tapered Surgical Kits Cont’d

SLIMKT SLIMKTE QNTSK20

Certain®Certain/External Hex Starter (Basic) Kit Upgrade Kit Premium Kit Description Item Numbers

•••Dense Bone Tap, 5mm(D) x 11.5mm(L) NTAP511

•••Dense Bone Tap, 5mm(D) x 13mm(L) NTAP513

••Dense Bone Tap, 5mm(D) x 15mm(L) NTAP515

••Dense Bone Tap, 6mm(D) x 8.5mm(L) NTAP685

••Dense Bone Tap, 6mm(D) x 10mm(L) NTAP610

••Dense Bone Tap, 6mm(D) x 11.5mm(L) NTAP611

••Dense Bone Tap, 6mm(D) x 13mm(L) NTAP613

••Dense Bone Tap, 6mm(D) x 15mm(L) NTAP615

•••Tapered Implant Dense Bone Tap Kit Tray NTAPKT

•• ••

Tapered Implant Depth Indicator, 3.25mm(D) x 8.5mm(L) 3ea.

NTDI3285*

•••••

Tapered Implant Depth Indicator, 3.25mm(D) x 10mm(L)

NTDI3210

•••••

Tapered Implant Depth Indicator, 3.25mm(D) x 11.5mm(L)

NTDI3211

•••••

Tapered Implant Depth Indicator, 3.25mm(D) x 13mm(L)

NTDI3213

••

Tapered Implant Depth Indicator, 3.25mm(D) x 15mm(L)

NTDI3215

•• ••

Tapered Implant Depth Indicator, 4mm(D) x 8.5mm(L) 3ea.

NTDI485*

•••••Tapered Implant Depth Indicator, 4mm(D) x 10mm(L) NTDI410

•••••Tapered Implant Depth Indicator, 4mm(D) x 11.5mm(L) NTDI411

•••••Tapered Implant Depth Indicator, 4mm(D) x 13mm(L) NTDI413

••Tapered Implant Depth Indicator, 4mm(D) x 15mm(L) NTDI415

••

Tapered Implant Depth Indicator, 5mm(D) x 8.5mm(L) 3ea.

NTDI585

•••Tapered Implant Depth Indicator, 5mm(D) x 10mm(L) NTDI510

•••Tapered Implant Depth Indicator, 5mm(D) x 11.5mm(L) NTDI511

•••Tapered Implant Depth Indicator, 5mm(D) x 13mm(L) NTDI513

••Tapered Implant Depth Indicator, 5mm(D) x 15mm(L) NTDI515

••

Tapered Implant Depth Indicator, 6mm(D) x 8.5mm(L) 3ea.

NTDI685

••Tapered Implant Depth Indicator, 6mm(D) x 10mm(L) NTDI610

••Tapered Implant Depth Indicator, 6mm(D) x 11.5mm(L) NTDI611

••Tapered Implant Depth Indicator, 6mm(D) x 13mm(L) NTDI613

••Tapered Implant Depth Indicator, 6mm(D) x 15mm(L) NTDI615

•••••Certain Countersink Drill, 4mm(D) ICD100

••QSD/NTDI Surgical Tray w/Plastic Insert QNTSKT

•• •Open End Wrench CW100

••Ratchet Wrench WR150

•• Hight Torque Indicating Ratchet Wrench H-TIRW

••• •Ratchet Extension (Short), 6mm(L) RE100

••Ratchet Extension (Long), 15mm(L) RE200

QNTSK40U QNTSK40

*One (1) each for SLIMKT and SLIMKTE.

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 30

Tapered Surgical Kits Cont’d

SLIMKT SLIMKTE QNTSK20

Certain®Certain/External Hex Starter (Basic) Kit Upgrade Kit Premium Kit Description Item Numbers

••Implant Depth Gauge, 20mm(L) DP020

•• •Narrow Posterior Hexed Driver, 17mm(L) PHD00N

••• •Posterior Large Hexed Driver, 17mm(L) PHD02N

• Narrow Right Angle Large Hexed Driver Tip, 24mm(L) RASH3N

• Direction Indicator, 2mm(D) x 10mm(L) 3ea. DI100

••• •Handpiece Connector MDR10

•• •Implant Mount, 3.4mm(D) x 15mm(L) MMC15

••• •ACT®Pointed Starter Drill ACTPSD

••ACT Reusable Twist Drill, 2mm(D) x 10mm(L) ACT2010

••• •ACT Reusable Twist Drill, 2mm(D) x 15mm(L) ACT2015

••ACT Reusable Twist Drill, 2mm(D) x 20mm(L) ACT2020

••• •ACT Drill Extension ACTDE

••• •

Certain Implant Placement Driver Tip (Short), 4.1, 5, 6mm(D)

IIPDTS

••• •Certain Implant Placement Driver Tip (Short), 3.4mm(D) IMPDTS

••

Certain Implant Placement Driver Tip (Long),

4.1, 5, 6mm(D)

IIPDTL

••Certain Implant Placement Driver Tip (Long), 3.4mm(D) IMPDTL

••

Certain Universal Ratchet Extension Driver (Short), 6mm(L)

IRE100U

••• •

Certain Universal Ratchet Extension Driver (Long), 15mm(L)

IRE200U

••Certain Driver Replacement O-Rings, 10-pack IRORDR

QNTSK40U QNTSK40

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 31

PSKT01 PSKT35 PSKT40

Starter (Basic) Kit CertainPremium Kit Premium Kit Description Item Numbers

• • • Plastic Surgical Tray Organizer PTT300I

• Plastic Tray Organizer for PTT300I PTT100

••ACT®Reusable Twist Drill, 2mm(D) x 10mm(L) ACT2010

•••ACT Reusable Twist Drill, 2mm(D) x 15mm(L) ACT2015

••ACT Reusable Twist Drill, 2mm(D) x 20mm(L) ACT2020

••ACT Reusable Twist Drill, 2.75mm(D) x 10mm(L) ACT2710

•••ACT Reusable Twist Drill, 2.75mm(D) x 15mm(L) ACT2715

• ACT Reusable Twist Drill, 2.75mm(D) x 20mm(L) ACT2720

••ACT Reusable Twist Drill, 3mm(D) x 10mm(L) ACT3010

•••ACT Reusable Twist Drill, 3mm(D) x 15mm(L) ACT3015

• ACT Reusable Twist Drill, 3mm(D) x 20mm(L) ACT3020

••ACT Reusable Twist Drill, 3.25mm(D) x 10mm(L) ACT3210

•••ACT Reusable Twist Drill, 3.25mm(D) x 15mm(L) ACT3215

• ACT Reusable Twist Drill, 3.25mm(D) x 20mm(L) ACT3220

•••ACT Reusable Twist Drill, 3.85mm(D) x 10mm(L) ACT3810

•••ACT Reusable Twist Drill, 3.85mm(D) x 15mm(L) ACT3815

•••ACT Reusable Twist Drill, 3.85mm(D) x 20mm(L) ACT3820

••ACT Reusable Twist Drill, 4.25mm(D) x 8.5mm(L) ACT4285

•••ACT Reusable Twist Drill, 4.25mm(D) x 13mm(L) ACT4213

••ACT Reusable Twist Drill, 4.25mm(D) x 18mm(L) ACT4218

••ACT Reusable Twist Drill, 4.85mm(D) x 8.5mm(L) ACT4885

••ACT Reusable Twist Drill, 4.85mm(D) x 13mm(L) ACT4813

••ACT Reusable Twist Drill, 4.85mm(D) x 18mm(L) ACT4818

••ACT Reusable Twist Drill, 5.25mm(D) x 8.5mm(L) ACT5285

••ACT Reusable Twist Drill, 5.25mm(D) x 13mm(L) ACT5213

••ACT Reusable Twist Drill, 5.25mm(D) x 18mm(L) ACT5218

•••ACT Drill Extension ACTDE

••Countersink Drill, OSSEOTITE XP®4/5, PREVAIL®4/5/4 CD4500

•••Countersink Depth Indicator for CD4500 CDI4500

•••Countersink/Pilot Drill, 5mm(D) CD500

••Countersink Drill, OSSEOTITE XP 5/6, PREVAIL 5/6/5 CD5600

PSKT40 Premium Kit

Parallel Walled Surgical Kits

For Certain®Internal Connection Implants

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 32

PSKT01 PSKT35 PSKT40

Starter (Basic) Kit Certain®Premium Kit Premium Kit Description Item Numbers

•••Countersink Depth Indicator for CD5600 CDI5600

•••Certain Countersink Drill, 4mm(D) ICD100

•••Countersink Depth Indicator for ICD100 ICDI100

••Countersink Drill, 4.1mm(D) CD100

••Countersink/Pilot Drill, 6mm(D) CD600

•••Pilot Drill, 2-3mm(D) PD100

••Implant Dense Bone Tap, 3.25mm(D) x 18mm(L) MTAP2

••Implant Dense Bone Tap, 4mm(D) x 13mm(L) TAP413

••Implant Dense Bone Tap, 5mm(D) x 13mm(L) TAP53S

• Implant Dense Bone Tap, 6mm(D) x 13mm(L) TAP63S

••OSSEOTITE®2 Dense Bone Tap, 5mm(D) x 7-13mm(L) XTAP53S

• OSSEOTITE 2 Dense Bone Tap, 6mm(D) x 7-13mm(L) XTAP63S

••Certain Implant Driver Tip (Short), 3.4mm(D) IMPDTS

•••Certain Implant Driver Tip (Long), 3.4mm(D) IMPDTL

•••Certain Implant Placement Driver Tip (Short), 4.1, 5, 6mm(D) IIPDTS

•••

Certain Implant Placement Driver Tip (Long), 4.1, 5, 6mm(D)

IIPDTL

•••

Certain Universal Ratchet Extension Driver (Short), 6mm(L)

IRE100U

•••

Certain Universal Ratchet Extension Driver (Long), 15mm(L)

IRE200U

••Narrow Small Hexed Hand Driver, 17mm(L) PHD00N

•••Narrow Large Hexed Hand Driver, 17mm(L) PHD02N

•••Narrow Large Hexed Driver, Tip 24mm(L) RASH3N

••Driver Tip Replacement O-Rings, 10-pack IRORDR

•••Handpiece Connector MDR10

••Open End Wrench CW100

•••Ratchet Wrench WR150

••Ratchet Extension (Short), 6mm(L) RE100

•••Ratchet Extension (Long), 15mm(L) RE200

•••Implant Depth Gauge, 20mm(L) DP020

••Implant Mount, 3.4mm(D) x 15mm(L) MMC15

•••Direction Indicator, 2mm(D) x 10mm(L) 3ea. DI100

•••Stainless Steel Round Drill, 2mm(D) RD100

Parallel Walled Surgical Kits Cont’d

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 33

Parallel Walled Surgical Kits

PSKT10 PSKT20 PSKT30

Starter (Basic) Kit Standard Kit Premium Kit Description Item Numbers

• • • Plastic Surgical Tray Organizer PTT300I

••Plastic Organizer Tray for PTT300I PTT100

••ACT®Reusable Twist Drill, 2mm(D) x 10mm(L) ACT2010

••ACT Reusable Twist Drill, 2mm(D) x 15mm(L) ACT2015

••ACT Reusable Twist Drill, 2mm(D) x 20mm(L) ACT2020

••ACT Reusable Twist Drill, 2.75mm(D) x 10mm(L) ACT2710

••ACT Reusable Twist Drill, 2.75mm(D) x 15mm(L) ACT2715

••ACT Reusable Twist Drill, 2.75mm(D) x 20mm(L) ACT2720

••ACT Reusable Twist Drill, 3mm(D) x 10mm(L) ACT3010

••ACT Reusable Twist Drill, 3mm(D) x 15mm(L) ACT3015

••ACT Reusable Twist Drill, 3mm(D) x 20mm(L) ACT3020

••ACT Reusable Twist Drill, 3.25mm(D) x 10mm(L) ACT3210

••ACT Reusable Twist Drill, 3.25mm(D) x 15mm(L) ACT3215

••ACT Reusable Twist Drill, 3.25mm(D) x 20mm(L) ACT3220

• ACT Reusable Twist Drill, 4.25mm(D) x 8.5mm(L) ACT4285

• ACT Reusable Twist Drill, 4.25mm(D) x 13mm(L) ACT4213

• ACT Reusable Twist Drill, 4.25mm(D) x 18mm(L) ACT4218

• ACT Reusable Twist Drill, 5.25mm(D) x 8.5mm(L) ACT5285

• ACT Reusable Twist Drill, 5.25mm(D) x 13mm(L) ACT5213

• ACT Reusable Twist Drill, 5.25mm(D) x 18mm(L) ACT5218

••ACT Drill Extension ACTDE

••Pilot Drill, 2-3mm(D) PD100

••Countersink Drill, 4.1mm(D) CD100

• Countersink Drill, OSSEOTITE XP®4/5, PREVAIL®4/5/4 CD4500

• Countersink/Pilot Drill, 5mm(D) CD500

• Countersink Drill, OSSEOTITE XP 5/6, PREVAIL 5/6/5 CD5600

• Countersink/Pilot Drill, 6mm(D) CD600

••Implant Dense Bone Tap, 3.25mm(D) x 18mm(L) MTAP2

••Implant Dense Bone Tap, 4mm(D) x 13mm(L) TAP413

• Implant Dense Bone Tap, 5mm(D) x 13mm(L) TAP53S

• Implant Dense Bone Tap, 6mm(D) x 13mm(L) TAP63S

• OSSEOTITE®2 Dense Bone Tap, 5mm(D) x 7-13mm(L) XTAP53S

• OSSEOTITE 2 Dense Bone Tap, 6mm(D) x 7-13mm(L) XTAP63S

For External Hex Connection Implants

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 34

Parallel Walled Surgical Kits Cont’d

Plastic Tray Organizer

PTT100

NOTE: For use with PTT300I

PSKT10 PSKT20 PSKT30

Starter (Basic) Kit Standard Kit Premium Kit Description Item Numbers

•••Narrow Small Hexed Hand Driver, 17mm(L) PHD00N

•••Narrow Large Hexed Hand Driver, 17mm(L) PHD02N

•••Narrow Large Hexed Driver Tip, 24mm(L) RASH3N

•••Handpiece Connector MDR10

•••Open End Wrench CW100

•••Ratchet Wrench WR150

•••Ratchet Extension (Short), 6mm(L) RE100

•••Ratchet Extension (Long), 15mm(L) RE200

•••Implant Depth Gauge, 20mm(L) DP020

••Implant Mount, 3.4mm(D) x 15mm(L) MMC15

••Direction Indicator, 2mm(D) x 10mm(L) 3ea. DI100

••Stainless Steel Round Drill, 2mm(D) RD100

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 35

Quad Shaping Drills

For Tapered Implants

Drill Lengths 3.25mm(D) 4mm(D) 5mm(D) 6mm(D) 6

8.5mm QSD3285 QSD485 QSD585 QSD685

10mm QSD3210 QSD410 QSD510 QSD610

11.5mm QSD3211 QSD411 QSD511 QSD611

13mm QSD3213 QSD413 QSD513 QSD613

15mm QSD3215 QSD415 QSD515 QSD615

Drills

7 – 8.5mm 8.5mm N/A N/A N/A N/A N/A N/A N/A ACT4285 ACT4885

ACT5285

7 – 10mm 10mm ACT2010 N/A ACT2710 ACT3010 ACT3110 ACT3210 ACT3810 N/A N/A N/A

7 – 13mm 13mm N/A N/A N/A N/A N/A N/A N/A ACT4213 ACT4813

ACT5213

7 – 15mm 15mm ACT2015 N/A ACT2715 ACT3015 ACT3115 ACT3215 ACT3815 N/A N/A N/A

7 – 18mm 18mm N/A N/A N/A N/A N/A N/A N/A ACT4218 ACT4818

ACT5218

7 – 20mm 20mm ACT2020 N/A ACT2720 ACT3020 ACT3120 ACT3220 ACT3820 N/A N/A N/A

Implant

Lengths Drill

Lengths

2mm(D) 2.3mm(D) 2.75mm(D) 3mm(D) 3.15mm(D) 3.25mm(D) 3.85mm(D) 4.25mm(D) 4.85mm(D) 5.25mm(D)

Description Disposable Reusable

Round Drill, 2mm DR100 RD100

ACT Pointed Starter Drill N/A ACTPSD

Pilot Drill, 2-3mm DP100 PD100

Countersink Drill - External Connection, 4.1mm DC100 CD100

Countersink Drill - Certain®Connection, 4.1mm N/A ICD100

Countersink Drill, 4/5mm N/A CD4500

Countersink/Pilot Drill, 5mm DC500 CD500

Countersink Drill, 5/6mm N/A CD5600

Countersink/Pilot Drill, 6mm DC600 CD600

ACT®Non-Irrigated Reusable Twist Drills

Surgical Drills

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 36

Handpiece Bone Profilers (Packaged with Guide Pin)

Surgical Components

Description Item Numbers

Bone Profiler, 3.4mm(D) x 3.8mm(P) BP340

Bone Profiler, 3/4, 4.1mm(D) x 5mm(P) BP450

Bone Profiler, 3/4, 4.1mm(D) x 6mm(P) BP460

Bone Profiler, 3/4, 4.1mm(D) x 7.5mm(P) BP475

Bone Profiler, 4/5, 5mm(D) x 5mm(P) BP550

Bone Profiler, 4/5, 5mm(D) x 6mm(P) BP560

Bone Profiler, 4/5, 5mm(D) x 7.5mm(P) BP575

Bone Profiler, 5/6, 6mm(D) x 6mm(P) BP660

Bone Profiler, 5/6, 6mm(D) x 7.5mm(P) BP675

Low Profile Abutment Bone Profilers

Bone Profiler Guide Pin, 4.1, 5 & 6mm(D) BPGUIDE

Guide Pins are included in all External Connection Bone Profiler Components

and Kits. For Certain Internal Connections, please order the appropriate

Certain Bone Profiler Guide Pin listed below.

Certain Bone Profiler Guide Pin, 3.25mm(D) 3-pack IBPMGP

Certain Bone Profiler Guide Pin, 4.1, 5 & 6mm(D) 3-pack IBPGP

Low Profile Abutment Bone Profiler, 3.4mm(D) LPCBP3

Low Profile Abutment Bone Profiler, 4.1mm(D) LPCBP4

Low Profile Abutment Bone Profiler, 5mm(D) LPCBP5

Certain®Manual Bone Profilers

Bone Profiler Guide Pins

Bone Profiler Organizers & Kits

Certain Manual Bone Profiler, 3.4mm(D) x 4.1mm(P) IMMBP

Certain Manual Bone Profiler, 3.4mm(D) x 5mm(P) IMMBP35

Certain Manual Bone Profiler, 4.1mm(D) x 5mm(P) IMBP4

Certain Manual Bone Profiler, 5mm(D) x 6mm(P) IMBP5

Certain Low Profile Abutment Manual Bone Profiler, 3.4mm(D) ILPCMBP3

Certain Low Profile Abutment Manual Bone Profiler, 4.1mm(D) ILPCMBP4

Certain Low Profile Abutment Manual Bone Profiler, 5mm(D) ILPCMBP5

Bone Profiler Organizer Box, 4.1mm(D) BPKITB

Bone Profiler Organizer Box, 5 & 6mm(D) BPAKTB

Bone Profiler Organizer Kit BB001

Bone Profiler Kit - For use with 4.1mm(D) Implants BPKIT

Contains: BP450, BP460, BP475, BB001

Bone Profiler Kit - For use with 5mm(D) or 6mm(D) Implants BPAKT

Contains: BP550, BP560, BP575, BP660, BP675, BB001

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 37

Bone Taps

Implant Lengths

3.25mm(D)

3.75mm(D)

4mm(D) 5mm(D) 6mm(D)

8.5 – 18mm MTAP1 (18mmL) N/A N/A N/A N/A

8.5 – 18mm MTAP2 (27mmL) N/A N/A N/A N/A

7 – 10mm N/A TAP10 TAP410 N/A N/A

7 – 13mm N/A TAP13 TAP413 N/A N/A

7 – 20mm N/A TAP20 TAP420 N/A N/A

7 – 8.5mm N/A N/A N/A TAP58S TAP68S

7 – 13mm N/A N/A N/A TAP53S TAP63S

7 – 18mm N/A N/A N/A TAP518S TAP618S

Bone Taps - &

6.5/7 – 8.5mm N/A N/A N/A XTAP58S XTAP68S

6.5/7 – 13mm N/A N/A N/A XTAP53S XTAP63S

6.5/7 – 18mm N/A N/A N/A XTAP518S XTAP618S

Implant Lengths 3.25mm(D) 4mm(D) 5mm(D) 6mm(D)

8.5mm NTAP3285 NTAP485 NTAP585 NTAP685

10mm NTAP3210 NTAP410 NTAP510 NTAP610

11.5mm NTAP3211 NTAP411 NTAP511 NTAP611

13mm NTAP3213 NTAP413 NTAP513 NTAP613

15mm NTAP3215 NTAP415 NTAP515 NTAP615

Dense Bone Taps For

Tapered Implants

NTAPK Dense Bone Tap Kit

NOTE: Kit includes all of the Dense Bone Taps listed above.

Surgical Components

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 38

Depth/Direction Indicators

For Tapered Implants

Implant Lengths 3.25mm(D) 4mm(D) 5mm(D) 6mm(D)

8.5mm NTDI3285 NTDI485 NTDI585 NTDI685

10mm NTDI3210 NTDI410 NTDI510 NTDI610

11.5mm NTDI3211 NTDI411 NTDI511 NTDI611

13mm NTDI3213 NTDI413 NTDI513 NTDI613

15mm NTDI3215 NTDI415 NTDI515 NTDI615

NTDIK Depth/Direction Indicator Kit

NOTE: Kit includes all of the indicators listed above.

Surgical Components

DI100 2mm/3mm(D) x 10mm(L)

2mm/3mm(D) x 15mm(L)

DI2310

2.3mm/3mm(D) x 10mm(L)

Anodized Blue

DI2315 2.3mm/3mm(D) x 15mm(L)

Anodized Gold

DI200

2.3

Direction Indicators

2.3

IC015 15mm(L) Implant

Mount

3.4

3.1

4.8

3.1

3.4

4.8

3.1

4.5

4.8

Mounts

IDIKT Certain®Direction

Indicator Kit

IDI001

10mm(L)

IDIM01

10mm(L)

For 3.25mm(D)

Implant

3.4mm(D) Implant

Mount Kit

MMKIT

3mm(L)

MMC03

15mm(L)

MMC15

Includes

2 each of:

ꅵ

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 39

H-TIRW High Torque Indicating Ratchet Wrench CW100 Open End Wrench

For use with External Connection Implants.

MALL1 Mallet

Stainless Steel

TE003 Titanium Elevator

TST01 TF002 Titanium Forceps

DP020

Miscellaneous Instrumentation

Titanium Suction Tip

Implant Depth Gauge

Surgical Components

8mm

6mm

4mm

2mm

Manual Interchangeable Driver Tip Handle

MIDTH

Tissue Measuring Post

TMP80

Ratchet Extensions

6mm(L)

15mm(L)

IRE100U

IRE200U

RE100

RE200

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich.

ACTDE ACT®Drill Extension

Miscellaneous Instrumentation

5mm(D)

MDR10 Handpiece Connector

RMB30 Radiographic Marking Balls (30-PK)

IC100 Surgical Index Coping

Surgical Components

2.39 x

10mm(L)

Tissue Punch

TP001

5mm

4.1mm

TP005

6mm

TP006

Certain Implant Placement Driver Tip

IIPDTL

Short

Long

IIPDTS

3.4mm(D)

Long

3.4mm(D)

Short

IMPDTL

IMPDTS

Gelb Radiographic Depth Gauge Kit

XDG00

2.3mm(D)

XDG01

2mm(D)x 13mm(L)

XDG13

2mm(D)x 20mm(L)

XDG20

2.3mm(D)x 13mm(L)

XDG2313

2.3mm(D)x 20mm(L)

XDG2320

Certain®Implant Driver Replacement O-Rings

(Qty: 10)

IRORDR

Includes:

ꅵ

SGT25 Stent Guide Tubes

Stainless Steel (25-PK)

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 41

Straight OSSEOTITE®Tapered Osteotome Kit NTOST0

Angled OSSEOTITE Tapered Osteotome Kit NTOST0A

Straight OSSEOTITE Tapered, 3.25mm(D) Osteotome NTOST3

Straight OSSEOTITE Tapered, 4mm(D) Osteotome NTOST4

Straight OSSEOTITE Tapered, 5mm(D) Osteotome NTOST5

Straight OSSEOTITE Tapered, 6mm(D) Osteotome NTOST6

Angled OSSEOTITE Tapered, 3.25mm(D) Osteotome NTOST3A

Angled OSSEOTITE Tapered, 4mm(D) Osteotome NTOST4A

Angled OSSEOTITE Tapered, 5mm(D) Osteotome NTOST5A

Angled OSSEOTITE Tapered, 6mm(D) Osteotome NTOST6A

Straight OSSEOTITE Tapered Osteotome Tray NTOSTTRS

Angled OSSEOTITE Tapered Osteotome Tray NTOSTTRA

Description Item Numbers

Summers Osteotome Kit #1-4 OST00

Summers Osteotome Kit #1-5 OST10

Summers Osteotome Kit #1-5, FS OST20

Summers Osteotome #1 OST01

Summers Osteotome #2 OST02

Summers Osteotome #3 OST03

Summers Osteotome #4 OST04

Summers Osteotome #5 OST05

Summers Osteotome For Future Site OSTFS

Summers Osteotome System Tray OSTTR

Description Item Numbers

Site Preparation Components

Straight And Angled Osteotomes

Summer Osteotomes

Site Preparation Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 42

TIBC1 ME100 ME200 ME300 TIPL1 TIPS1 TRE02 TRE04 TRE05 TRE06 TRE08

Sinus Elevators Trephine Burs

Description Item Numbers

Sinus Elevation Kit SEKT1

Titanium Nitride Coated Bone Carrier TIBC1

Small Membrane Elevator ME100

Medium Membrane Elevator ME200

Large Membrane Elevator ME300

Large Titanium Plugger TIPL1

Small Titanium Plugger TIPS1

Sinus Elevation Tray SEKTR

Site Preparation Components

Sinus Elevation

Trephine Burs

Description Item Numbers

Trephine Bur, 2mm Inside Diameter/3mm Outside Diameter TRE02

Trephine Bur, 4mm Inside Diameter/5mm Outside Diameter TRE04

Trephine Bur, 5mm Inside Diameter/6mm Outside Diameter TRE05

Trephine Bur, 6mm Inside Diameter/7mm Outside Diameter TRE06

Trephine Bur, 8mm Inside Diameter/9.3mm Outside Diameter TRE08

Regenerative Technologies

Endobon®Xenograft Granules

A RegenerOss®Product.

• Bovine-derived Hydroxyapatite

• Osteoconductive material for bony in-growth

• 500–1000µm and 1000–2000µm particle sizes for

dental applications

• High porosity with interconnecting macro and micropores

• Easy to use packaging

• 3-year shelf-life

Manufactured By Biomet France Sarl

RegenerOss®Allograft

The options you want. The results you expect.

• Cortical or cancellous bone: mineralized or demineralized

• Three particle ranges: 200–300, 300–500, 500–800 microns

• Consistency from lot-to-lot

• Packaging is designed for ease of handling and quick,

convenient reconstitution

• Aseptically processed and irradiated products available

• 5-year shelf-life

Manufactured By The University of Miami Tissue Bank

RegenerOss Allograft Putty Plus

Demineralized bone matrix and mineralized bone chips/mixture.

• Contains 48% by weight DBM (28% cortical and 20%

cancellous chips) for optimal handling and bone regeneration

• Moldable, non-toxic, lecithin carrier that is highly resistant

to irrigation

• Osteoinductivity of every lot is validated by a cell proliferation

assay

• Ergonomic design features a smaller diameter syringe with

a curved tip to treat hard-to-reach defects

• DBM only option also available

• 2-year shelf-life

Manufactured By LifeLink Tissue Bank (AATB Certified)

OsseoGuard®Resorbable Collagen

Membrane

The protection you need to grow.

• Dental barrier for guided bone regeneration

• Type I collagen bovine tendon

• Strong enough to resist tearing when tacked or sutured, yet

pliable for easy placement

• Resorption profile of 6-9 months

• Does not require removal when exposed

• 3-year shelf-life

Manufactured By Collagen Matrix, Inc., Franklin Lakes, NJ

Product Overview

Regenerative Technologies

Safescraper® TWIST

Cortical bone scraper/collector.

• Unique design provides 160° cutting area and facilitates

access to difficult posterior regions

• Effectively harvests up to 5cc of bone

• Contains bone in a sterile exclusive chamber, which is

designed to protect patients from cross-contamination

• Shortens operating time and simplifies graft collection

• Lateral opening system provides device stability

• 3-year shelf-life

Manufactured By META®Advanced Medical Technology

OsseoGuard Flex®Resorbable

Collagen Membrane

Creating balance between flexibility and resorption profile.

• Same clinical benefits as OsseoGuard

• Flexible, yet won’t fold over onto itself

• Type I and III bovine dermis

• 2-year shelf-life

Manufactured By Collagen Matrix, Inc., Franklin Lakes, NJ

Biogran® Bioactive Glass

Bioactive glass for effective regeneration in most oral applications.

• Granules are the optimal size range, large enough not to pack too

densely, small enough to fully resorb

• Provides a unique protective environment needed for osteogenesis

• Completely resorbable through the Krebs cycle

• 100% synthetic

• Forms a cohesive mass when mixed with blood or sterile

saline, minimizing the potential for dry socket

• Pre-formed dappen dish or pre-formed dappen dish with

empty syringe

• 5-year shelf-life

Manufactured By BIOMET 3i

Product Overview

Allografts

Regenerative Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 45

Description Item Numbers

RegenerOss®Allograft

Demineralized Freeze Dried Bone Allograft (DFDBA)

& Freeze Dried Bone Allograft (FDBA)

Cancellous, Partially Demineralized 0.5cc 200-300µm RDCA205

Cancellous, Partially Demineralized 1cc 200-300µm RDCA210

Cancellous, Partially Demineralized 0.5cc 300-500µm RDCA305

Cancellous, Partially Demineralized 1cc 300-500µm RDCA310

Cancellous, Partially Demineralized 0.5cc 500-800µm RDCA505

Cancellous, Partially Demineralized 1cc 500-800µm RDCA510

Cortical, Partially Demineralized 0.5cc 200-300µm RDCO205

Cortical, Partially Demineralized 1cc 200-300µm RDCO210

Cortical, Partially Demineralized 0.5cc 300-500µm RDCO305

Cortical, Partially Demineralized 1cc 300-500µm RDCO310

Cortical, Partially Demineralized 0.5cc 500-800µm RDCO505

Cortical, Partially Demineralized 1cc 500-800µm RDCO510

Cancellous, Mineralized 0.5cc 200-300µm RMCA205

Cancellous, Mineralized 1cc 200-300µm RMCA210

Cancellous, Mineralized 0.5cc 300-500µm RMCA305

Cancellous, Mineralized 1cc 300-500µm RMCA310

Cancellous, Mineralized 0.5cc 500-800µm RMCA505

Cancellous, Mineralized 1cc 500-800µm RMCA510

Cortical, Mineralized 0.5cc 200-300µm RMCO205

Cortical, Mineralized 1cc 200-300µm RMCO210

Cortical, Mineralized 0.5cc 300-500µm RMCO305

Cortical, Mineralized 1cc 300-500µm RMCO310

Cortical, Mineralized 0.5cc 500-800µm RMCO505

Cortical, Mineralized 1cc 500-800µm RMCO510

Cancellous, Mineralized 2cc 200-300µm RMCA220

Cancellous, Mineralized 2cc 300-500µm RMCA320

Cancellous, Mineralized 2cc 500-800µm RMCA520

Cortical, Mineralized 2cc 200-300µm RMCO220

Cortical, Mineralized 2cc 300-500µm RMCO320

Cortical, Mineralized 2cc 500-800µm RMCO520

Cancellous, Partially Demineralized 2cc 200-300µm RDCA220

Cancellous, Partially Demineralized 2cc 300-500µm RDCA320

Cancellous, Partially Demineralized 2cc 500-800µm RDCA520

Cortical, Partially Demineralized 2cc 200-300µm RDCO220

Cortical, Partially Demineralized 2cc 300-500µm RDCO320

Cortical, Partially Demineralized 2cc 500-800µm RDCO520

Manufactured By:

Allografts (Cont’d)

Regenerative Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 46

Description Item Numbers

Cancellous, Partially Demineralized, Irradiated 0.5cc 300-500µm RDCA305r

Cancellous, Partially Demineralized, Irradiated 1cc 300-500µm RDCA310r

Cortical, Partially Demineralized, Irradiated 0.5cc 200-300µm RDCO205r

Cortical, Partially Demineralized, Irradiated 0.5cc 300-500µm RDCO305r

Cortical, Partially Demineralized, Irradiated 1cc 300-500µm RDCO310r

Cancellous, Mineralized, Irradiated 0.5cc 200-300µm RMCA205r

Cancellous, Mineralized, Irradiated 0.5cc 300-500µm RMCA305r

Cortical, Mineralized, Irradiated 0.5cc 300-500µm RMCO305r

Cancellous, Partially Demineralized, Irradiated 2cc 300-500µm RDCA320r

Cortical, Partially Demineralized, Irradiated 2cc 300-500µm RDCO320r

Cancellous, Mineralized, Irradiated 1cc 300-500µm RMCA310r

Cortical, Mineralized, Irradiated 1cc 300-500µm RMCO310r

Special Order Allograft Items:

Dura Mater Patch (Membrane) 4x5cm 0655*

Fascia Lata Patch (Membrane) 4x5cm 0716*

Right Hemi Mandible 0630*

Left Hemi Mandible 0631*

Full Mandible 0632*

Iliac Crest Strip Small 0055*

Iliac Crest Strip Medium 0473*

lliac Crest Strip Large 0056*

Mineralized Cancellous Powder 10cc 100-200µm 1454*

Demineralized Cancellous Powder 10cc 100-200µm 1462*

Demineralized Cortical Powder 10cc 100-200µm 1465*

Dental M&M Block Small 1507*

Dental M&M Block, Irradiated Small 1523*

Dental M&M Block Medium 1491*

Dental M&M Block, Irradiated Medium 1522*

Dental M&M Block Large 1508*

Dental M&M Block, Irradiated Large 1565*

RegenerOss®Allograft Putty

Demineralized Bone Matrix In A Lecithin Carrier

Manufactured By BIOMET Interpore Cross

0.5cc Syringe ROAP05

1cc Syringe ROAP10

2cc Syringe ROAP20

RegenerOss Allograft Putty Plus

0.5cc Syringe ROAPM05

1cc Syringe ROAPM10

2cc Pack (4 x 0.5cc syringes) Value Pack! ROAPM20

*Special order, allow up to 6 weeks.

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich. 47

Autogenous

Safescraper®TWIST

Disposable Cortical Bone Collector (3-pack) Curved 3987

Straight 3598

R. Quétin Bone-Mill

Stainless Steel Bone Grinder QBM001

Alloplasts

Biogran®

100% Synthetic Resorbable Bone Graft Material

Mixing Cup (750mg) & Syringe 1-Pack 2100-0750

Mixing Cups (500mg) 7-Pack 2100-0003

Mixing Cups (750mg) 7-Pack 2100-0004

Mixing Cups (1500mg) 7-Pack 2100-0005

GBR Barriers

OsseoGuard®Membrane

Cross-linked Bovine Collagen

Manufactured By Collagen Matrix, Inc., Franklin Lakes, NJ

Resorbable Collagen Membrane 15mm x 20mm OG1520

Resorbable Collagen Membrane 20mm x 30mm OG2030

Resorbable Collagen Membrane 30mm x 40mm OG3040

OsseoGuard Flex®Membrane

Cross-linked Highly Purified Bovine Dermis Collagen

Manufactured By Collagen Matrix, Inc., Franklin Lakes, NJ

Resorbable Collagen Membrane 15mm x 20mm OGF1520

Resorbable Collagen Membrane 20mm x 30mm OGF2030

Resorbable Collagen Membrane 30mm x 40mm OGF3040

Manufactured By META®Advanced Medical Technology

Endobon®Xenograft Granules

A RegenerOss®Product (Bovine-derived Hydroxyapatite Particulate)

Manufactured By Biomet France Sarl

500 – 1000µm 0.5ml ROX05

500 – 1000µm 1ml ROX10

500 – 1000µm 2ml ROX20

1000 – 2000µm 2ml ROXLG20

1000 – 2000µm 5ml ROXLG50

1000 – 2000µm 8ml ROXLG80

Description Item Numbers

Xenografts

Regenerative Technologies

Some products may not be available outside of the United States.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich.

Patient Education Products

Description Item Numbers

Patient Ed Model - DIEM®2 (4-unit) DIEM2-4UNIT

Patient Ed Model - DIEM 2 (6-unit) DIEM2-6UNIT

Patient Ed Model - OSSEOTITE®Implant EXHEXMOD

Patient Ed Model - LOCATOR

PEMODLOC

Patient Ed Model - Single/Multiple Teeth PEMODSM

Patient Ed Brochure - Bone Loss (25-pack) ART885

Patient Ed Brochure - Multiple Teeth (25-pack) ART887

Patient Ed Brochure - Implant Retained, Fixed (25-pack) ART888

Patient Ed Brochure - Implant Retained, LOCATOR (25-pack) ART889

Patient Ed Brochure - Implant Retained, Bar (25-pack) ART890

Patient Ed Brochure - Immediate Teeth Replacement, DIEM (25-pack) ART929

Patient Ed Care Card (25-pack) ART930

Patient Ed Flip Chart ART943

Patient Ed DVD - Multilingual Version ART951EUR

Patient Ed Brochure - Bone Loss (Spanish Version) ART957S

Patient Ed Awareness and Education Poster ART962

Patient Ed Quad-fold Brochure with Holder (25-pack) ART1154

Patient Ed General Brochure (25-pack) ART1157

Patient Ed Regenerative Brochure ART1178

Instructions For Use:

For a detailed explanation of the osteotomy preparation and

implant placement guidelines, please refer to the appropriate

Surgical Manual(s).

Description:

BIOMET 3i Dental Implants are manufactured from biocompatible

titanium or titanium alloy. BIOMET 3i Dental Implants include

various surface treatments. For specific product descriptions,

please refer to individual product labels.

Indications For Use:

BIOMET 3i Dental Implants are intended for surgical placement

in the upper or lower jaw to provide a means for prosthetic

attachment in single tooth restorations and in partially or fully

edentulous spans with multiple single teeth utilizing delayed

loading, or as a terminal or intermediary abutment for fixed or

removable bridgework, and to retain overdentures. BIOMET 3i

T3®, NanoTite™ and OSSEOTITE®Dental Implants may also

utilize immediate loading for these indications.

BIOMET 3i T3, NanoTite and OSSEOTITE Dental Implants are

intended for immediate function on single tooth and/or multiple

tooth applications when good primary stability is achieved, with

appropriate occlusal loading, in order to restore chewing function.

Contraindications:

Placement of dental implants may be precluded by both patient

conditions that are contraindications for surgery as well as

hypersensitivity to commercially pure titanium or titanium alloy

(including vanadium, aluminum and calcium phosphate).

BIOMET 3i Dental Implants should not be placed in patients

where the remaining jaw bone is too diminished to provide

adequate implant stability.

Warnings:

Excessive bone loss or breakage of a dental implant may occur

when an implant is loaded beyond its functional capability.

Physiological and anatomical conditions may affect the

performance of dental implants.

Mishandling of small components inside the patient’s mouth

carries a risk of aspiration and/or swallowing.

Forcing the implant into the osteotomy deeper than the depth

established by the drills can result in damage to the implant,

driver or osteotomy.

For short implants, clinicians should closely monitor patients for

any of the following conditions: peri-implant bone loss, changes

to the implant’s response to percussion or radiographic changes

in bone to implant contact along the implant’s length. If the

implant shows mobility or greater than 50% bone loss, the

implant should be evaluated for possible removal. If a clinician

chooses a short implant, then the clinician should consider a

two-stage surgical approach, splinting a short implant to an

additional implant and placement of the widest possible fixture.

In addition, the clinician should allow longer periods for

osseointegration and avoid immediate loading.

Reuse of BIOMET 3i Products that are labeled for single-use

may result in product contamination, patient infection and/or

failure of the device to perform as intended.

MRI Statement:

BIOMET 3i Dental Implants have not been evaluated for safety,

heating, migration, or compatibility in the Magnetic Resonance

Imaging (MRI) environment.

Precautions:

These devices are only to be used by trained professionals.

The surgical and restorative techniques required to properly

utilize these devices are highly specialized and complex

procedures. Improper technique can lead to implant failure,

loss of supporting bone, restoration fracture, screw loosening

and aspiration. When the clinician has determined adequate

primary stability is achieved, immediate functional loading can

be considered.

The following should be taken into consideration when placing

dental implants: bone quality, oral hygiene and medical

conditions such as blood disorders or uncontrolled hormonal

conditions. The healing period varies depending on the quality

of the bone at the implantation site, the tissue response to the

implanted device and the surgeon’s evaluation of the patient’s

bone density at the time of the surgical procedure. Proper

occlusion should be evaluated on the implant restoration to

avoid excessive force during the healing period on the implant.

It is recommended that implants less than 4mm diameter NOT

be placed in the posterior regions.

Sterility:

All dental implants are supplied sterile and are labeled “STERILE”.

All products sold sterile are for single-use before the expiration

date printed on the product label. Do not use sterile products

if the packaging has been damaged or previously opened.

Do not re-sterilize.

Storage And Handling:

Devices should be stored at room temperature. Refer to

individual product labels and the Surgical Manual for special

storage or handling conditions.

Potential Adverse Events:

Potential adverse events associated with the use of dental

implants may include: failure to integrate, loss of integration,

dehiscence requiring bone grafting, perforation of the maxillary

sinus, inferior border, lingual plate, labial plate, inferior alveolar

canal or gingiva, infection as reported by abscess, fistula,

suppuration, inflammation, or radiolucency, persistent pain,

numbness, paresthesia, hyperplasia, excessive bone loss

requiring intervention, implant breakage or fracture, systemic

infection, nerve injury and aspiration.

Caution:

U.S. Federal Law restricts this device to sale by or on the order

of a licensed dentist or physician.

Important Product Information For Dental Implants

Instructions For Use:

For detailed information on the specific procedure for the

product you are using, please refer to the individual product

labels or the appropriate manual on the BIOMET 3i Website.

Description:

BIOMET 3i Restorative Products are manufactured from

biocompatible titanium, titanium alloy, gold, gold alloy,

zirconium, vanadium, stainless steel, polyetheretherketone

(PEEK), cobalt chromium alloy, and polyoxymethylene (Delrin).

Please refer to product guidelines for Use/Surgical Manual for

additional device information.

Indications For Use:

BIOMET 3i Restorative Products are intended for use as an

accessory to endosseous dental implants for placement in the

maxilla and mandible.

Provisional Abutments are intended for use as an accessory to

endosseous dental implants to support a prosthetic device in a

partially or fully edentulous patient. They are intended for use

to support a prosthesis in the mandible or maxilla for up to 180

days during endosseous and gingival healing, and are for non-

occlusal loading of provisional restorations. The prosthesis will

be either cement, mechanically or screw-retained to the

abutment system based on individual product design. For

compatibility of BellaTek®Patient Specific Abutments, please

refer to the compatibility table in the accompanying document.

Contraindications:

Placement of BIOMET 3i Restorative Products are precluded by

known patient hypersensitivity to any of the materials listed in

the Description section above.

Warnings:

Mishandling of small components inside the patient’s mouth

carries a risk of aspiration and/or swallowing. Fracture of a

restoration may occur when an abutment is loaded beyond its

functional capability. Reuse of BIOMET 3i Products that are

labeled for single-use may result in product contamination,

patient infection and/or failure of the device to perform as

intended.

PEEK components are intended for use to support single- or

multiple-unit provisional prostheses in the mandible or maxilla

for up to 180 days, at which time a definitive prosthesis should

be inserted.

Sterility:

Some BIOMET 3i Restorative Products are supplied sterile.

Refer to individual product labels for sterilization information; all

sterile products are labeled “STERILE”. All products sold sterile

are for single-use before the “use by” date printed on the

product label. Do not use sterile products if the packaging has

been damaged or previously opened. Products provided non-

sterile may need to be cleaned and sterilized prior to use.

Please refer to the individual product labels or Restorative

Manual for more information. For products provided non-sterile

requiring sterilization prior to use, BIOMET 3i recommends the

following sterilization parameters for wrapped items:

Steam gravity sterilization method (gravity-displacement cycle) -

Minimum exposure of fifteen (15) minutes timing at a

temperature of 270ºF (132ºC)* or

Pre-vacuum sterilization method (dynamic-air-removal cycle) -

Minimum exposure of four (4) minutes, four (4) pulses timing at

a temperature of 270ºF (132ºC).*

*Post sterilization, devices should be thoroughly dried for 30 minutes. Please refer

to the Surgical and Restorative Manual or package insert for the remaining care

and cleaning instructions.

Do not re-sterilize or autoclave components except where

indicated on the individual product label, where instructions

have been provided in the Restorative Manual or in any

additional product literature for the given component.

MRI Statement:

BIOMET 3i Restorative Products have not been evaluated for

safety, heating, migration, or compatibility in the Magnetic

Resonance Imaging (MRI) environment.

Precautions:

BIOMET 3i Restorative Products should only be used by trained

professionals. The surgical and restorative techniques required

to properly utilize these products are highly specialized and

complex procedures. Improper technique can lead to implant

failure, loss of supporting bone, restoration fracture, screw

loosening and aspiration. Components made from PEEK

material are intended for use for up to 180 days.

Potential Adverse Events:

Potential adverse events associated with the use of restorative

products may include: failure to integrate; loss of integration;

dehiscence requiring bone grafting; infection as reported by:

abscess, fistula, suppuration, inflammation, radiolucency; gingival

hyperplasia; excessive bone loss requiring intervention; fracture;

and nerve injury.

Storage And Handling:

BIOMET 3i Restorative Products should be stored at room

temperature. Refer to the Surgical Manual for special storage or

handling conditions.

Caution:

U.S. Federal Law restricts this device to sale by or on the order

of a licensed dentist or physician.

Important Product Information For Restorative Products

0055 ILIAC CREST STRIP, SMALL 46

0056 ILIAC CREST STRIP, LARGE 46

0473 ILIAC CREST STRIP, MEDIUM 46

0630 RIGHT HEMI MANDIBLE 46

0631 LEFT HEMI MANDIBLE 46

0632 FULL MANDIBLE 46

0655 DURA MATER-PATCH (MEMBRANE), 4X5CM 46

0716 FASCIA LATA PATCH (MEMBRANE), 4X5CM 46

1454 MINERALIZED CANCELLOUS POWDER, 10CC, 100-200µm 46

1462 DEMINERALIZED CANCELLOUS POWDER, 10CC, 100-200µm 46

1465 DEMINERALIZED CORTICAL POWDER, 10CC, 100-200µm 46

1491 DENTAL M&M BLOCK, MEDIUM 46

1507 DENTAL M&M BLOCK, SMALL 46

1508 DENTAL M&M BLOCK, LARGE 46

1522 DENTAL M&M BLOCK, IRRADIATED, MEDIUM 46

1523 DENTAL M&M BLOCK, IRRADIATED, SMALL 46

1565 DENTAL M&M BLOCK, IRRADIATED, LARGE 46

3598 SAFESCRAPER®TWIST, STRAIGHT (3-PACK) 47

3987 SAFESCRAPER TWIST, CURVED (3-PACK) 47

2100-0003 BIOGRAN®500MG MIXING CUP (7-PACK) 47

2100-0004 BIOGRAN 750MG MIXING CUP (7-PACK) 47

2100-0005 BIOGRAN 1500MG MIXING CUP (7-PACK) 47

2100-0750 BIOGRAN 750MG MIXING CUP & SYRINGE (1-PACK) 47

31-3100 BIOMET 2MM FIXATION SYSTEM 27

ACT2010 ACT®REUSABLE TWIST DRILL, 2MM X 10MM 30,31,33,35

ACT2015 ACT REUSABLE TWIST DRILL, 2MM X 15MM 30,31,33,35

ACT2020 ACT REUSABLE TWIST DRILL, 2MM X 20MM 30,31,33,35

ACT2710 ACT REUSABLE TWIST DRILL, 2.75MM X 10MM 31,33,35

ACT2715 ACT REUSABLE TWIST DRILL, 2.75MM X 15MM 31,33,35

ACT2720 ACT REUSABLE TWIST DRILL, 2.75MM X 20MM 31,33,35

ACT3010 ACT REUSABLE TWIST DRILL, 3MM X 10MM 31,33,35

ACT3015 ACT REUSABLE TWIST DRILL, 3MM X 15MM 31,33,35

ACT3020 ACT REUSABLE TWIST DRILL, 3MM X 20MM 31,33,35

ACT3110 ACT REUSABLE TWIST DRILL, 3.15MM X 10MM 35

ACT3115 ACT REUSABLE TWIST DRILL, 3.15MM X 15MM 35

ACT3120 ACT REUSABLE TWIST DRILL, 3.15MM X 20MM 35

ACT3210 ACT REUSABLE TWIST DRILL, 3.25MM X 10MM 31,33,35

ACT3215 ACT REUSABLE TWIST DRILL, 3.25MM X 15MM 31,33,35

ACT3220 ACT REUSABLE TWIST DRILL, 3.25MM X 20MM 31,33,35

ACT3810 ACT REUSABLE TWIST DRILL, 3.85MM X 10MM 31,35

ACT3815 ACT REUSABLE TWIST DRILL, 3.85MM X 15MM 31,35

ACT3820 ACT REUSABLE TWIST DRILL, 3.85MM X 20MM 31,35

ACT4285 ACT REUSABLE TWIST DRILL, 4.25MM X 8.5MM 31,33,35

ACT4213 ACT REUSABLE TWIST DRILL, 4.25MM X 13MM 31,33,35

ACT4218 ACT REUSABLE TWIST DRILL, 4.25MM X 18MM 31,33,35

ACT4885 ACT REUSABLE TWIST DRILL, 4.85MM X 8.5MM 31,35

ACT4813 ACT REUSABLE TWIST DRILL, 4.85MM X 13MM 31,35

ACT4818 ACT REUSABLE TWIST DRILL, 4.85MM X 18MM 31,35

ACT5285 ACT REUSABLE TWIST DRILL, 5.25MM X 8.5MM 31,33,35

ACT5213 ACT REUSABLE TWIST DRILL, 5.25MM X 13MM 31,33,35

ACT5218 ACT REUSABLE TWIST DRILL, 5.25MM X 18MM 31,33,35

ACTDE ACT DRILL EXTENSION 30,31,33,40

ACTPSD ACT POINTED STARTER DRILL 31,35

ART1178 PATIENT ED REGENERATIVE BROCHURE 48

ART885 PATIENT ED BROCHURE - BONE LOSS (25-PACK) 48

ART887 PATIENT ED BROCHURE - MULTIPLE TEETH (25-PACK) 48

ART888 PATIENT ED BROCHURE - IMPLANT RETAINED, FIXED (25-PACK) 48

ART889 PATIENT ED BROCHURE - IMPLANT RETAINED, LOCATOR®(25-PACK) 48

ART890 PATIENT ED BROCHURE - IMPLANT RETAINED, BAR (25-PACK) 48

ART929

PATIENT ED BROCHURE -

IMMEDIATE TEETH REPLACEMENT, DIEM

(25-PACK)

ART930 PATIENT ED CARE CARD (25-PACK) 48

ART943 PATIENT ED FLIP CHART 48

ART951EUR PATIENT ED DVD - MULTILINGUAL VERSION 48

ART957S PATIENT ED BROCHURE - BONE LOSS (SPANISH VERSION) 48

ART962 PATIENT ED AWARENESS AND EDUCATION POSTER 48

BB001 BONE PROFILER ORGANIZER KIT 36

BNES365 3i T3®W/DCD®PARALLEL WALLED IMPLANT, 3.25MM(D) X 6.5MM(L) 7

BNES385 3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.25MM(D) X 8.5MM(L) 7

BNES310 3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.25MM(D) X 10MM(L) 7

BNES311 3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L) 7

BNES313 3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.25MM(D) X 13MM(L) 7

BNES315 3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.25MM(D) X 15MM(L) 7

BNES318 3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.25MM(D) X 18MM(L) 7

BNES3765 3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.75MM(D) X 6.5MM(L) 7

BNES3785 3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.75MM(D) X 8.5MM(L) 7

BNES3710 3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.75MM(D) X 10MM(L) 7

BNES3711 3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.75MM(D) X 11.5MM(L) 7

BNES3713 3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.75MM(D) X 13MM(L) 7

BNES3715 3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.75MM(D) X 15MM(L) 7

BNES3718 3i T3 W/DCD PARALLEL WALLED IMPLANT, 3.75MM(D) X 18MM(L) 7

BNES465 3i T3 W/DCD PARALLEL WALLED IMPLANT, 4MM(D) X 6.5MM(L) 7

BNES485 3i T3 W/DCD PARALLEL WALLED IMPLANT, 4MM(D) X 8.5MM(L) 7

BNES410 3i T3 W/DCD PARALLEL WALLED IMPLANT, 4MM(D) X 10MM(L) 7

BNES411 3i T3 W/DCD PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L) 7

BNES413 3i T3 W/DCD PARALLEL WALLED IMPLANT, 4MM(D) X 13MM(L) 7

BNES415 3i T3 W/DCD PARALLEL WALLED IMPLANT, 4MM(D) X 15MM(L) 7

BNES418 3i T3 W/DCD PARALLEL WALLED IMPLANT, 4MM(D) X 18MM(L) 7

BNES565 3i T3 W/DCD PARALLEL WALLED IMPLANT, 5MM(D) X 6.5MM(L) 7

BNES585 3i T3 W/DCD PARALLEL WALLED IMPLANT, 5MM(D) X 8.5MM(L) 7

BNES510 3i T3 W/DCD PARALLEL WALLED IMPLANT, 5MM(D) X 10MM(L) 7

BNES511 3i T3 W/DCD PARALLEL WALLED IMPLANT, 5MM(D) X 11.5MM(L) 7

BNES513 3i T3 W/DCD PARALLEL WALLED IMPLANT, 5MM(D) X 13MM(L) 7

BNES515 3i T3 W/DCD PARALLEL WALLED IMPLANT, 5MM(D) X 15MM(L) 7

BNES518 3i T3 W/DCD PARALLEL WALLED IMPLANT, 5MM(D) X 18MM(L) 7

BNES665 3i T3 W/DCD PARALLEL WALLED IMPLANT, 6MM(D) X 6.5MM(L) 7

BNES685 3i T3 W/DCD PARALLEL WALLED IMPLANT, 6MM(D) X 8.5MM(L) 7

BNES610 3i T3 W/DCD PARALLEL WALLED IMPLANT, 6MM(D) X 10MM(L) 7

BNES611 3i T3 W/DCD PARALLEL WALLED IMPLANT, 6MM(D) X 11.5MM(L) 7

BNES613 3i T3 W/DCD PARALLEL WALLED IMPLANT, 6MM(D) X 13MM(L) 7

BNES615 3i T3 W/DCD PARALLEL WALLED IMPLANT, 6MM(D) X 15MM(L) 7

BNES618 3i T3 W/DCD PARALLEL WALLED IMPLANT, 6MM(D) X 18MM(L) 7

BNET3285 3i T3 W/DCD TAPERED IMPLANT, 3.25MM(D) X 8.5MM(L) 7

BNET3210 3i T3 W/DCD TAPERED IMPLANT, 3.25MM(D) X 10MM(L) 7

BNET3211 3i T3 W/DCD TAPERED IMPLANT, 3.25MM(D) X 11.5MM(L) 7

BNET3213 3i T3 W/DCD TAPERED IMPLANT, 3.25MM(D) X 13MM(L) 7

BNET3215 3i T3 W/DCD TAPERED IMPLANT, 3.25MM(D) X 15MM(L) 7

BNET485 3i T3 W/DCD TAPERED IMPLANT, 4MM(D) X 8.5MM(L) 7

BNET410 3i T3 W/DCD TAPERED IMPLANT, 4MM(D) X 10MM(L) 7

BNET411 3i T3 W/DCD TAPERED IMPLANT, 4MM(D) X 11.5MM(L) 7

BNET413 3i T3 W/DCD TAPERED IMPLANT, 4MM(D) X 13MM(L) 7

BNET415 3i T3 W/DCD TAPERED IMPLANT, 4MM(D) X 15MM(L) 7

BNET585 3i T3 W/DCD TAPERED IMPLANT, 5MM(D) X 8.5MM(L) 7

BNET510 3i T3 W/DCD TAPERED IMPLANT, 5MM(D) X 10MM(L) 7

BNET511 3i T3 W/DCD TAPERED IMPLANT, 5MM(D) X 11.5MM(L) 7

Index

Item# Description Page# Item# Description Page#

BNET513 3i T3®W/DCD®TAPERED IMPLANT, 5MM(D) X 13MM(L) 7

BNET515 3i T3 W/DCD TAPERED IMPLANT, 5MM(D) X 15MM(L) 7

BNET685 3i T3 W/DCD TAPERED IMPLANT, 6MM(D) X 8.5MM(L) 7

BNET610 3i T3 W/DCD TAPERED IMPLANT, 6MM(D) X 10MM(L) 7

BNET611 3i T3 W/DCD TAPERED IMPLANT, 6MM(D) X 11.5MM(L) 7

BNET613 3i T3 W/DCD TAPERED IMPLANT, 6MM(D) X 13MM(L) 7

BNET615 3i T3 W/DCD TAPERED IMPLANT, 6MM(D) X 15MM(L) 7

BNPS4310 3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4/3 X 10MM(L)

BNPS4311 3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4/3 X 11.5MM(L)

BNPS4313 3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4/3 X 13MM(L)

BNPS4315 3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4/3 X 15MM(L)

BNPS4385 3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4/3 X 8.5MM(L)

BNPS5410 3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

5/4 X 10MM(L)

BNPS5411 3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

5/4 X 11.5MM(L)

BNPS5413 3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

5/4 X 13MM(L)

BNPS5415 3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

5/4 X 15MM(L)

BNPS5485 3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

5/4 X 8.5MM(L)

BNPS6510 3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

6/5 X 10MM(L)

BNPS6511 3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

6/5 X 11.5MM(L)

BNPS6513 3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

6/5 X 13MM(L)

BNPS6515 3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

6/5 X 15MM(L)

BNPS6585 3i T3 W/DCD PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

6/5 X 8.5MM(L)

BNPT4310 3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 10MM(L) 1

BNPT4311 3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 11.5MM(L) 1

BNPT4313 3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 13MM(L) 1

BNPT4315 3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 15MM(L) 1

BNPT4385 3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 8.5MM(L) 1

BNPT5410 3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 10MM(L) 1

BNPT5411 3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 11.5MM(L) 1

BNPT5413 3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 13MM(L) 1

BNPT5415 3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 15MM(L) 1

BNPT5485 3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 8.5MM(L) 1

BNPT6510 3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 10MM(L) 1

BNPT6511 3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 11.5MM(L) 1

BNPT6513 3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 13MM(L) 1

BNPT6515 3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 15MM(L) 1

BNPT6585

3i T3 W/DCD PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 8.5MM(L)

BNSS310 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

3.25MM(D) X 10MM(L)

BNSS311 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

3.25MM(D) X 11.5MM(L)

BNSS313 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

3.25MM(D) X 13MM(L)

BNSS315 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

3.25MM(D) X 15MM(L)

BNSS318 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

3.25MM(D) X 18MM(L)

BNSS385 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

3.25MM(D) X 8.5MM(L)

BNSS410 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4MM(D) X 10MM(L)

BNSS411 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4MM(D) X 11.5MM(L)

BNSS413 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4MM(D) X 13MM(L)

BNSS415 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4MM(D) X 15MM(L)

BNSS418 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4MM(D) X 18MM(L)

BNSS485 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4MM(D) X 8.5MM(L)

BNSS510 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

5MM(D) X 10MM(L)

BNSS511 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

5MM(D) X 11.5MM(L)

BNSS513 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

5MM(D) X 13MM(L)

BNSS515 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

5MM(D) X 15MM(L)

BNSS585 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

5MM(D) X 8.5MM(L)

BNSS610 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

6MM(D) X 10MM(L)

BNSS611 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

6MM(D) X 11.5MM(L)

BNSS613 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

6MM(D) X 13MM(L)

BNSS615 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

6MM(D) X 15MM(L)

BNSS685 3i T3 W/DCD NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

6MM(D) X 8.5MM(L)

BNST3210 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

3.25MM(D) X 10MM(L)

BNST3211 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

3.25MM(D) X 11.5MM(L)

BNST3213 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

3.25MM(D) X 13MM(L)

BNST3215 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

3.25MM(D) X 15MM(L)

BNST3285 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

3.25MM(D) X 8.5MM(L)

BNST410 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

4MM(D) X 10MM(L)

BNST411 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

4MM(D) X 11.5MM(L)

BNST413 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

4MM(D) X 13MM(L)

BNST415 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

4MM(D) X 15MM(L)

BNST485 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

4MM(D) X 8.5MM(L)

BNST510 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

5MM(D) X 10MM(L)

BNST511 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

5MM(D) X 11.5MM(L)

Index

Item# Description Page# Item# Description Page#

Index

Item# Description Page# Item# Description Page#

BNST513 3i T3®W/DCD®NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

5MM(D) X 13MM(L)

BNST515 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

5MM(D) X 15MM(L)

BNST585 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

5MM(D) X 8.5MM(L)

BNST610 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

6MM(D) X 10MM(L)

BNST611 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

6MM(D) X 11.5MM(L)

BNST613 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

6MM(D) X 13MM(L)

BNST615 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

6MM(D) X 15MM(L)

BNST685 3i T3 W/DCD NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

6MM(D) X 8.5MM(L)

BOES365 3i T3 PARALLEL WALLED IMPLANT, 3.25MM(D) X 6.5MM(L) 7

BOES385 3i T3 PARALLEL WALLED IMPLANT, 3.25MM(D) X 8.5MM(L) 7

BOES310 3i T3 PARALLEL WALLED IMPLANT, 3.25MM(D) X 10MM(L) 7

BOES311 3i T3 PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L) 7

BOES313 3i T3 PARALLEL WALLED IMPLANT, 3.25MM(D) X 13MM(L) 7

BOES315 3i T3 PARALLEL WALLED IMPLANT, 3.25MM(D) X 15MM(L) 7

BOES318 3i T3 PARALLEL WALLED IMPLANT, 3.25MM(D) X 18MM(L) 7

BOES3765 3i T3 PARALLEL WALLED IMPLANT, 3.75MM(D) X 6.5MM(L) 7

BOES3785 3i T3 PARALLEL WALLED IMPLANT, 3.75MM(D) X 8.5MM(L) 7

BOES3710 3i T3 PARALLEL WALLED IMPLANT, 3.75MM(D) X 10MM(L) 7

BOES3711 3i T3 PARALLEL WALLED IMPLANT, 3.75MM(D) X 11.5MM(L) 7

BOES3713 3i T3 PARALLEL WALLED IMPLANT, 3.75MM(D) X 13MM(L) 7

BOES3715 3i T3 PARALLEL WALLED IMPLANT, 3.75MM(D) X 15MM(L) 7

BOES3718 3i T3 PARALLEL WALLED IMPLANT, 3.75MM(D) X 18MM(L) 7

BOES465 3i T3 PARALLEL WALLED IMPLANT, 4MM(D) X 6.5MM(L) 7

BOES485 3i T3 PARALLEL WALLED IMPLANT, 4MM(D) X 8.5MM(L) 7

BOES410 3i T3 PARALLEL WALLED IMPLANT, 4MM(D) X 10MM(L) 7

BOES411 3i T3 PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L) 7

BOES413 3i T3 PARALLEL WALLED IMPLANT, 4MM(D) X 13MM(L) 7

BOES415 3i T3 PARALLEL WALLED IMPLANT, 4MM(D) X 15MM(L) 7

BOES418 3i T3 PARALLEL WALLED IMPLANT, 4MM(D) X 18MM(L) 7

BOES565 3i T3 PARALLEL WALLED IMPLANT, 5MM(D) X 6.5MM(L) 7

BOES585 3i T3 PARALLEL WALLED IMPLANT, 5MM(D) X 8.5MM(L) 7

BOES510 3i T3 PARALLEL WALLED IMPLANT, 5MM(D) X 10MM(L) 7

BOES511 3i T3 PARALLEL WALLED IMPLANT, 5MM(D) X 11.5MM(L) 7

BOES513 3i T3 PARALLEL WALLED IMPLANT, 5MM(D) X 13MM(L) 7

BOES515 3i T3 PARALLEL WALLED IMPLANT, 5MM(D) X 15MM(L) 7

BOES518 3i T3 PARALLEL WALLED IMPLANT, 5MM(D) X 18MM(L) 7

BOES665 3i T3 PARALLEL WALLED IMPLANT, 6MM(D) X 6.5MM(L) 7

BOES685 3i T3 PARALLEL WALLED IMPLANT, 6MM(D) X 8.5MM(L) 7

BOES610 3i T3 PARALLEL WALLED IMPLANT, 6MM(D) X 10MM(L) 7

BOES611 3i T3 PARALLEL WALLED IMPLANT, 6MM(D) X 11.5MM(L) 7

BOES613 3i T3 PARALLEL WALLED IMPLANT, 6MM(D) X 13MM(L) 7

BOES615 3i T3 PARALLEL WALLED IMPLANT, 6MM(D) X 15MM(L) 7

BOES618 3i T3 PARALLEL WALLED IMPLANT, 6SMM(D) X 18MM(L) 7

BOET3285 3i T3 TAPERED IMPLANT, 3.25MM(D) X 8.5MM(L) 7

BOET3210 3i T3 TAPERED IMPLANT, 3.25MM(D) X 10MM(L) 7

BOET3211 3i T3 TAPERED IMPLANT, 3.25MM(D) X 11.5MM(L) 7

BOET3213 3i T3 TAPERED IMPLANT, 3.25MM(D) X 13MM(L) 7

BOET3215 3i T3 TAPERED IMPLANT, 3.25MM(D) X 15MM(L) 7

BOET485 3i T3 TAPERED IMPLANT, 4MM(D) X 8.5MM(L) 7

BOET410 3i T3 TAPERED IMPLANT, 4MM(D) X 10MM(L) 7

BOET411 3i T3 TAPERED IMPLANT, 4MM(D) X 11.5MM(L) 7

BOET413 3i T3 TAPERED IMPLANT, 4MM(D) X 13MM(L) 7

BOET415 3i T3 TAPERED IMPLANT, 4MM(D) X 15MM(L) 7

BOET585 3i T3 TAPERED IMPLANT, 5MM(D) X 8.5MM(L) 7

BOET510 3i T3 TAPERED IMPLANT, 5MM(D) X 10MM(L) 7

BOET511 3i T3 TAPERED IMPLANT, 5MM(D) X 11.5MM(L) 7

BOET513 3i T3 TAPERED IMPLANT, 5MM(D) X 13MM(L) 7

BOET515 3i T3 TAPERED IMPLANT, 5MM(D) X 15MM(L) 7

BOET685 3i T3 TAPERED IMPLANT, 6MM(D) X 8.5MM(L) 7

BOET610 3i T3 TAPERED IMPLANT, 6MM(D) X 10MM(L) 7

BOET611 3i T3 TAPERED IMPLANT, 6MM(D) X 11.5MM(L) 7

BOET613 3i T3 TAPERED IMPLANT, 6MM(D) X 13MM(L) 7

BOET615 3i T3 TAPERED IMPLANT, 6MM(D) X 15MM(L) 7

BOPS4310 3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 4/3 X 10MM(L) 2

BOPS4311

3iT3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 4/3 X 11.5MM(L)

BOPS4313 3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 4/3 X 13MM(L) 2

BOPS4315 3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 4/3 X 15MM(L) 2

BOPS4385 3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 4/3 X 8.5MM(L) 2

BOPS5410 3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 5/4 X 10MM(L) 2

BOPS5411 3i

T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 5/4 X 11.5MM(L)

BOPS5413 3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 5/4 X 13MM(L) 2

BOPS5415 3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 5/4 X 15MM(L) 2

BOPS5485 3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 5/4 X 8.5MM(L) 2

BOPS6510 3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 6/5 X 10MM(L) 2

BOPS6511

3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 6/5 X 11.5MM(L)

BOPS6513 3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 6/5 X 13MM(L) 2

BOPS6515 3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 6/5 X 15MM(L) 2

BOPS6585 3i T3 PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 6/5 X 8.5MM(L) 2

BOPT4310 3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 10MM(L) 1

BOPT4311 3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 11.5MM(L) 1

BOPT4313 3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 13MM(L) 1

BOPT4315 3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 15MM(L) 1

BOPT4385 3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 4/3 X 8.5MM(L) 1

BOPT5410 3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 10MM(L) 1

BOPT5411 3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 11.5MM(L) 1

BOPT5413 3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 13MM(L) 1

BOPT5415 3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 15MM(L) 1

BOPT5485 3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 5/4 X 8.5MM(L) 1

BOPT6510 3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 10MM(L) 1

BOPT6511 3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 11.5MM(L) 1

BOPT6513 3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 13MM(L) 1

BOPT6515 3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 15MM(L) 1

BOPT6585 3i T3 PLATFORM SWITCHED TAPERED IMPLANT, 6/5 X 8.5MM(L) 1

BOSS310 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

3.25MM(D) X 10MM(L)

BOSS311 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

3.25MM(D) X 11.5MM(L)

BOSS313 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

3.25MM(D) X 13MM(L)

BOSS315 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

3.25MM(D) X 15MM(L)

BOSS318 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

3.25MM(D) X 18MM(L)

BOSS385 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

3.25MM(D) X 8.5MM(L)

BOSS410 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4MM(D) X 10MM(L)

Index

Item# Description Page# Item# Description Page#

BOSS411 3i T3®NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4MM(D) X 11.5MM(L)

BOSS413 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4MM(D) X 13MM(L)

BOSS415 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4MM(D) X 15MM(L)

BOSS418 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4MM(D) X 18MM(L)

BOSS485 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

4MM(D) X 8.5MM(L)

BOSS510 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

5MM(D) X 10MM(L)

BOSS511 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

5MM(D) X 11.5MM(L)

BOSS513 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

5MM(D) X 13MM(L)

BOSS515 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

5MM(D) X 15MM(L)

BOSS585 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

5MM(D) X 8.5MM(L)

BOSS610 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

6MM(D) X 10MM(L)

BOSS611 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

6MM(D) X 11.5MM(L)

BOSS613 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

6MM(D) X 13MM(L)

BOSS615 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

6MM(D) X 15MM(L)

BOSS685 3i T3 NON-PLATFORM SWITCHED PARALLEL WALLED IMPLANT, 2

6MM(D) X 8.5MM(L)

BOST3210 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

3.25MM(D) X 10MM(L)

BOST3211 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

3.25MM(D) X 11.5MM(L)

BOST3213 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

3.25MM(D) X 13MM(L)

BOST3215 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

3.25MM(D) X 15MM(L)

BOST3285 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 1

3.25MM(D) X 8.5MM(L)

BOST410 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 4MM(D) X 10MM(L) 1

BOST411

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 4MM(D) X 11.5MM(L) 1

BOST413 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 4MM(D) X 13MM(L) 1

BOST415 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 4MM(D) X 15MM(L) 1

BOST485 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 4MM(D) X 8.5MM(L) 1

BOST510 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 5MM(D) X 10MM(L) 1

BOST511

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 5MM(D) X 11.5MM(L) 1

BOST513 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 5MM(D) X 13MM(L) 1

BOST515 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 5MM(D) X 15MM(L) 1

BOST585 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 5MM(D) X 8.5MM(L) 1

BOST610 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 6MM(D) X 10MM(L) 1

BOST611

3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 6MM(D) X 11.5MM(L) 1

BOST613 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 6MM(D) X 13MM(L) 1

BOST615 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 6MM(D) X 15MM(L) 1

BOST685 3i T3 NON-PLATFORM SWITCHED TAPERED IMPLANT, 6MM(D) X 8.5MM(L) 1

BP340 BONE PROFILER W/GUIDE PIN, 3.4MM(D) X 3.8MM(P) 36

BP450 BONE PROFILER W/GUIDE PIN, 4.1MM(D) X 5MM(P) 36

BP460 BONE PROFILER W/GUIDE PIN, 4.1MM(D) X 6MM(P) 36

BP475 BONE PROFILER W/GUIDE PIN, 4.1MM(D) X 7.5MM(P) 36

BP550 BONE PROFILER W/GUIDE PIN, 5MM(D) X 5MM(P) 36

BP560 BONE PROFILER W/GUIDE PIN, 5MM(D) X 6MM(P) 36

BP575 BONE PROFILER W/GUIDE PIN, 5MM(D) X 7.5MM(P) 36

BP660 BONE PROFILER W/GUIDE PIN, 6MM(D) X 6MM(P) 36

BP675 BONE PROFILER W/GUIDE PIN, 6MM(D) X 7.5MM(P) 36

BPAKT BONE PROFILER KIT, 5 & 6MM(D) 36

BPAKTB BONE PROFILER ORGANIZER BOX, 5 & 6MM(D) 36

BPGUIDE BONE PROFILER GUIDE PIN, 4.1, 5 & 6MM(D) 36

BPKIT BONE PROFILER KIT, 4.1MM(D) 36

BPKITB BONE PROFILER ORGANIZER BOX, 4.1MM(D) 36

C202-750 OSSEOCISION®TUBE CLAMP 20

C293-025 OSSEOCISION INTERNAL IRRIGATION TUBE 20

C823-752 OSSEOCISION Y-CONNECTOR 20

CD100

COUNTERSINK REUSABLE DRILL, 4.1MM EXTERNAL CONNECTION

32,33,35

CD4500 COUNTERSINK REUSABLE DRILL, 4/5, 4/5/4MM 31,33,35

CD500 COUNTERSINK/PILOT REUSABLE DRILL, 5MM 31,33,35

CD5600 COUNTERSINK/PILOT REUSABLE DRILL, 5/6, 5/4/5MM 31,33,35

CD600 COUNTERSINK/PILOT REUSABLE DRILL, 4.25–5.25MM 32,33,35

CS275 HEADLESS COVER SCREW, 4.1, 5, 6MM(D) 7,8,9,10

CS375 IMPLANT COVER SCREW, 4.1MM(D) X 1MM(H) 7,8,9,10

CS500 IMPLANT COVER SCREW, 5MM(D) X 1MM(H) 7,8,9,10

CS600 IMPLANT COVER SCREW, 6MM(D) X 1MM(H) 7,8,9,10

CW100 OPEN END WRENCH 22,26,29,32,34,39

DC100

COUNTERSINK DISPOSABLE DRILL, 4.1MM EXTERNAL CONNECTION

DC500 PILOT/COUNTERSINK DISPOSABLE DRILL, 5MM 35

DC600 PILOT/COUNTERSINK DISPOSABLE DRILL, 6MM 35

DIEM2-4UNIT PATIENT ED MODEL - DIEM

2 (4-UNIT) 48

DIEM2-6UNIT PATIENT ED MODEL - DIEM 2 (6-UNIT) 48

DI100 DIRECTION INDICATOR, 2MM(D) X 10MM(L), 3EA. 30,32,34,38

DI200 DIRECTION INDICATOR, 2MM(D) X 15MM(L) 38

DI2310 DIRECTION INDICATOR, 2.3MM(D) X 10MM(L) 38

DI2315 DIRECTION INDICATOR, 2.3MM(D) X 15MM(L) 38

DP020 IMPLANT DEPTH GAUGE, 20MM(L) 29,32,34,39

DP100 DISPOSABLE PILOT DRILL, 2-3MM 35

DR100 DISPOSABLE ROUND BUR 35

DS100J OSSEOCISION SURGICAL DRILL SYSTEM (100V) W/HANDPIECE 20

DS100RW OSSEOCISION SURGICAL DRILL SYSTEM (230V) W/HANDPIECE 20

DS100US OSSEOCISION SURGICAL DRILL SYSTEM (120V) W/HANDPIECE 20

DU1000US DU1000 SURGICAL DRILLING UNIT, 115 VOLT (USA) 19

DU1000EU DU1000 SURGICAL DRILLING UNIT, 230 VOLT (EUROPE) 19

DU1KFC DU1000 FOOT CONTROL 19

DU1KH1 DU1000 HANDLE FOR FOOT CONTROL 19

DU1KHS DU1000 MOTOR/HANDPIECE SUPPORT 19

DU1KIT DU1000 DISPOSABLE IRRIGATION TUBING SET (6-PIECE) 19

DU1KMC DU1000 MICROMOTOR WITH CABLE 19

DU1KPCCH DU1000 ELECTRICAL POWER CORD (SWITZERLAND) 19

DU1KPCDK DU1000 ELECTRICAL POWER CORD (DENMARK) 19

DU9BG DU1000 BUR TESTING GAUGE 19

DU9CL DU1000 IRRIGATION TUBE CLAMPS (5-PACK) 19

DU9F DU1000 CIRCUIT FUSE 19

DU9IBS DU1000 IRRIGATION BAG STAND 19

DU9LP DU1000 LOCKING PIN 19

DU9NC DU1000 NOZZLE CLEANER 19

DU9PCAU DU1000 ELECTRICAL POWER CORD (AUSTRALIA, NEW ZEALAND) 19

DU9PCEU DU1000 ELECTRICAL POWER CORD (EUROPE) 19

DU9PCUK DU1000 ELECTRICAL POWER CORD (UNITED KINGDOM, IRELAND) 19

DU9SC DU1000 SPRAY CAP WITH NOZZLE 19

DU9SP DU1000 MOTOR PROTECTIVE COVER 19

Item# Description Page# Item# Description Page#

DU9WI75L DU1000 20:1 HANDPIECE 19

DU9WS75 DU1000 20:1 HANDPIECE 19

DU9YC DU1000 Y-CONNECTOR (3-PACK) 19

DU9PCUS DU1000 ELECTRICAL POWER CORD (USA, CANADA, JAPAN) 19

E211-001 OSSEOCISION®MICROMOTOR W/CORD 20

E211-051 OSSEOCISION MOTOR CORD 20

E211-701 OSSEOCISION AUTOCLAVE PLUG FOR MOTOR 20

EHA343 BELLATEK®ENCODE®2-PC HEALING ABUTMENT, 15

3.4MM(D) X 3.8MM(P) X 3MM(H)

EHA344 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

3.4MM(D) X 3.8MM(P) X 4MM(H)

EHA346 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

3.4MM(D) X 3.8MM(P) X 6MM(H)

EHA348 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

3.4MM(D) X 3.8MM(P) X 8MM(H)

EHA353 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

3.4MM(P) X 5MM(P) X 3MM(H)

EHA354 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

3.4MM(P) X 5MM(P) X 4MM(H)

EHA356 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

3.4MM(P) X 5MM(P) X 6MM(H)

EHA358 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

3.4MM(P) X 5MM(P) X 8MM(H)

EHA443 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

4.1MM(D) X 4.1MM(P) X 3MM(H)

EHA444 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

4.1MM(D) X 4.1MM(P) X 4MM(H)

EHA446 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

4.1MM(D) X 4.1MM(P) X 6MM(H)

EHA448 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

4.1MM(D) X 4.1MM(P) X 8MM(H)

EHA453 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

4.1MM(D) X 5MM(P) X 3MM(H)

EHA454 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

4.1MM(D) X 5MM(P) X 4MM(H)

EHA456 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

4.1MM(D) X 5MM(P) X 6MM(H)

EHA458 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

4.1MM(D) X 5MM(P) X 8MM(H)

EHA463 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

4.1MM(D) X 6MM(P) X 3MM(H)

EHA464 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

4.1MM(D) X 6MM(P) X 4MM(H)

EHA466 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

4.1MM(D) X 6MM(P) X 6MM(H)

EHA468 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

4.1MM(D) X 6MM(P) X 8MM(H)

EHA553 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

5MM(D) X 5MM(P) X 3MM(H)

EHA554 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

5MM(D) X 5MM(P) X 4MM(H)

EHA556 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

5MM(D) X 5MM(P) X 6MM(H)

EHA558 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

5MM(D) X 5MM(P) X 8MM(H)

EHA563 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

5MM(D) X 6MM(P) X 3MM(H)

EHA564 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

5MM(D) X 6MM(P) X 4MM(H)

EHA566 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

5MM(D) X 6MM(P) X 6MM(H)

EHA568 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

5MM(D) X 6MM(P) X 8MM(H)

EHA663 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

6MM(D) X 6MM(P) X 3MM(H)

EHA664 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

6MM(D) X 6MM(P) X 4MM(H)

EHA666 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

6MM(D) X 6MM(P) X 6MM(H)

EHA668 BELLATEK ENCODE 2-PC HEALING ABUTMENT, 15

6MM(D) X 6MM(P) X 8MM(H)

EXHEXMOD PATIENT ED MODEL - OSSEOTITE®IMPLANT 48

FNT3210 FULL OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 10MM(L) 7

FNT3211 FULL OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 11.5MM(L) 7

FNT3213 FULL OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 13MM(L) 7

FNT3215 FULL OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 15MM(L) 7

FNT3285 FULL OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 8.5MM(L) 7

FNT410 FULL OSSEOTITE TAPERED IMPLANT, 4MM(D) X 10MM(L) 7

FNT411 FULL OSSEOTITE TAPERED IMPLANT, 4MM(D) X 11.5MM(L) 7

FNT413 FULL OSSEOTITE TAPERED IMPLANT, 4MM(D) X 13MM(L) 7

FNT415 FULL OSSEOTITE TAPERED IMPLANT, 4MM(D) X 15MM(L) 7

FNT485 FULL OSSEOTITE TAPERED IMPLANT, 4MM(D) X 8.5MM(L) 7

FNT510 FULL OSSEOTITE TAPERED IMPLANT, 5MM(D) X 10MM(L) 7

FNT511 FULL OSSEOTITE TAPERED IMPLANT, 5MM(D) X 11.5MM(L) 7

FNT513 FULL OSSEOTITE TAPERED IMPLANT, 5MM(D) X 13MM(L) 7

FNT515 FULL OSSEOTITE TAPERED IMPLANT, 5MM(D) X 15MM(L) 7

FNT585 FULL OSSEOTITE TAPERED IMPLANT, 5MM(D) X 8.5MM(L) 7

FNT610 FULL OSSEOTITE TAPERED IMPLANT, 6MM(D) X 10MM(L) 7

FNT611 FULL OSSEOTITE TAPERED IMPLANT, 6MM(D) X 11.5MM(L) 7

FNT613 FULL OSSEOTITE TAPERED IMPLANT, 6MM(D) X 13MM(L) 7

FNT615 FULL OSSEOTITE TAPERED IMPLANT, 6MM(D) X 15MM(L) 7

FNT685 FULL OSSEOTITE TAPERED IMPLANT, 6MM(D) X 8.5MM(L) 7

FOS307 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 7MM(L) 10

FOS310 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 10MM(L) 10

FOS311

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 11.5MM(L)

FOS313 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 13MM(L) 10

FOS315 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 15MM(L) 10

FOS385 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 8.5MM(L) 10

FOS407 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 7MM(L) 10

FOS410 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 10MM(L) 10

FOS411 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L) 10

FOS413 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 13MM(L) 10

FOS415 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 15MM(L) 10

FOS485 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 8.5MM(L) 10

FOS507 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 7MM(L) 10

FOS510 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 10MM(L) 10

FOS511 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 11.5MM(L) 10

FOS513 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 13MM(L) 10

FOS515 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 15MM(L) 10

FOS585 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 8.5MM(L) 10

FOS607 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 7MM(L) 10

FOS610 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 10MM(L) 10

FOS611 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 11.5MM(L) 10

FOS613 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 13MM(L) 10

FOS615 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 15MM(L) 10

FOS685 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 8.5MM(L) 10

Index

Item# Description Page# Item# Description Page#

FOSM307 FULL OSSEOTITE®PARALLEL WALLED IMPLANT, 3.25MM(D) X 7MM(L) 10

FOSM310 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 10MM(L) 10

FOSM311

FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L)

FOSM313 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 13MM(L) 10

FOSM315 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 15MM(L) 10

FOSM385 FULL OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 8.5MM(L) 10

H-TIRW HIGH TORQUE INDICATING RATCHET WRENCH 39

IBPGP CERTAIN®PROFILER GUIDE PIN (3-PACK), 4.1, 5 & 6MM(D) 36

IBPMGP CERTAIN BONE PROFILER GUIDE PIN (3-PACK), 3.25MM(D) 36

IC015 IMPLANT MOUNT, 15MM(L) 39

IC100 SURGICAL INDEX COPING 40

ICD100

CERTAIN COUNTERSINK DRILL, 4MM(D)

32,35

ICDI100 COUNTERSINK DEPTH INDICATOR FOR ICD100 32

ICS375 CERTAIN IMPLANT COVER SCREW, 4.1MM(D) X 1MM(H) 1,2,3,4,5,6

ICS500 CERTAIN IMPLANT COVER SCREW, 5MM(D) X 1MM(H) 1,2,3,4,5,6

ICS600 CERTAIN IMPLANT COVER SCREW, 6MM(D) X 1MM(H) 1,2,3,5,6

ICSF41 CERTAIN FLAT IMPLANT COVER SCREW, 4.1MM(D) 1,2,3,4,5,6

ICSF50 CERTAIN FLAT IMPLANT COVER SCREW, 5MM(D) 1,2,3,4,5,6

ICSF60 CERTAIN FLAT IMPLANT COVER SCREW, 6MM(D) 1,2

IDI001 CERTAIN DIRECTION INDICATOR, 10MM(L) 38

IDIKT CERTAIN DIRECTION INDICATOR KIT 38

IDIM01 CERTAIN DIRECTION INDICATOR, 3.25MM(D) X 10MM(L) 38

IEHA343 CERTAIN BELLATEK®ENCODE®2-PC HEALING ABUTMENT, 12

3.4MM(D) X 3.8MM(P) X 3MM(H)

IEHA344 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

3.4MM(D) X 3.8MM(P) X 4MM(H)

IEHA346 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

3.4MM(D) X 3.8MM(P) X 6MM(H)

IEHA348 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

3.4MM(D) X 3.8MM(P) X 8MM(H)

IEHA353 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

3.4MM(D) X 5MM(P) X 3MM(H)

IEHA354 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

3.4MM(D) X 5MM(P) X 4MM(H)

IEHA356 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

3.4MM(D) X 5MM(P) X 6MM(H)

IEHA358 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

3.4MM(D) X 5MM(P) X 8MM(H)

IEHA443 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

4.1MM(D) X 4.1MM(P) X 3MM(H)

IEHA444 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

4.1MM(D) X 4.1MM(P) X4MM(H)

IEHA446 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

4.1MM(D) X 4.1MM(P) X 6MM(H)

IEHA448 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

4.1MM(D) X 4.1MM(P) X 8MM(H)

IEHA453 BELLATEK CERTAIN ENCODE 2-PC HEALING ABUTMENT, 12

4.1MM(D) X 5MM(P) X 3MM(H)

IEHA454 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

4.1MM(D) X 5MM(P) X 4MM(H)

IEHA456 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

4.1MM(D) X 5MM(P) X 6MM(H)

IEHA458 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

4.1MM(D) X 5MM(P) X 8MM(H)

IEHA463 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

4.1MM(D) X 6MM(P) X 3MM(H)

IEHA464 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

4.1MM(D) X 6MM(P) X 4MM(H)

IEHA466 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

4.1MM(D) X 6MM(P) X 6MM(H)

IEHA468 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

4.1MM(D) X 6MM(P) X 8MM(H)

IEHA553 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

5MM(D) X 5MM(P) X 3MM(H)

IEHA554 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

5MM(D) X 5MM(P) X 4MM(H)

IEHA556 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

5MM(D) X 5MM(P) X 6MM(H)

IEHA558 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

5MM(D) X 5MM(P) X 8MM(H)

IEHA563 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

5MM(D) X 6MM(P) X 3MM(H)

IEHA564 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

5MM(D) X 6MM(P) X 4MM(H)

IEHA566 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

5MM(D) X 6MM(P) X 6MM(H)

IEHA568 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

5MM(D) X 6MM(P) X 8MM(H)

IEHA663 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

6MM(D) X 6MM(P) X 3MM(H)

IEHA664 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

6MM(D) X 6MM(P) X 4MM(H)

IEHA666 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

6MM(D) X 6MM(P) X 6MM(H)

IEHA668 CERTAIN BELLATEK ENCODE 2-PC HEALING ABUTMENT, 12

6MM(D) X 6MM(P) X 8MM(H)

IIPDTL

CERTAIN IMPLANT PLACEMENT DRIVER (LONG)

, 4.1, 5, 6MM(D)

30,32,40

IIPDTS

CERTAIN IMPLANT PLACEMENT DRIVER (SHORT), 4.1, 5, 6MM(D)

30,32,40

ILPCMBP3 C

ERTAIN LOW PROFILE ABUTMENT MANUAL BONE PROFILER, 3.4MM(D)

ILPCMBP4

CERTAIN LOW PROFILE ABUTMENT MANUAL BONE PROFILER, 4.1MM(D)

ILPCMBP5 CERTAIN LOW PROFILE ABUTMENT MANUAL BONE PROFILER, 5MM(D) 36

IMBP4 CERTAIN MANUAL BONE PROFILER, 4.1MM(D) X 5MM(P) 22,26,36

IMBP5 CERTAIN MANUAL BONE PROFILER, 5MM(D) X 6MM(P) 22,26,36

IMCSF34 CERTAIN FLAT IMPLANT COVER SCREW, 3.4MM(D) 1,2,3,4,5,6

IMHA32

CERTAIN EP®1-PC HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 2MM(H)

IMHA33

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 3MM(H)

IMHA34

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 4MM(H)

IMHA36

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 6MM(H)

IMHA352

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 5MM(P) X 2MM(H)

IMHA353

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 5MM(P) X 3MM(H)

IMHA354

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 5MM(P) X 4MM(H)

IMHA356

CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 5MM(P) X 6MM(H)

IMMBP CERTAIN MANUAL BONE PROFILER, 3.4MM(D) X 4.1MM(P) 22,26,36

IMMBP35 CERTAIN MANUAL BONE PROFILER, 3.4MM(D) X 5MM(P) 36

IMMCS1 CERTAIN COVER SCREW, 3.4MM(D) X 1MM(H) 1,2,3,4,5,6

IMPDTL CERTAIN IMPLANT PLACEMENT DRIVER TIP, 3.4MM(D) LONG 30,32,40

IMPDTS CERTAIN IMPLANT PLACEMENT DRIVER TIP, 3.4MM(D) SHORT 30,32,40

IRE100U CERTAIN UNIVERSAL RATCHET EXTENSION, 6MM(L) SHORT 30,32,39

IRE200U CERTAIN UNIVERSAL RATCHET EXTENSION, 15MM(L) LONG 30,32,39

IRORDR CERTAIN DRIVER REPLACEMENT O-RINGS, QTY:10 30,32,40

ISHA42 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 2MM(H) 13

ISHA43 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 3MM(H) 13

ISHA44 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 4MM(H) 13

ISHA46 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 6MM(H) 13

ISHA48 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 8MM(H) 13

ISMHA32 CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.4MM(P) X 2MM(H) 13

ISMHA33 CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.4MM(P) X 3MM(H) 13

ISMHA34 CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.4MM(P) X 4MM(H) 13

ISMHA36 CERTAIN EP 1-PC HEALING ABUTMENT, 3.4MM(D) X 3.4MM(P) X 6MM(H) 13

Index

Item# Description Page# Item# Description Page#

ISWHA52 CERTAIN®EP®1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 2MM(H) 14

ISWHA53 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 3MM(H) 14

ISWHA54 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 4MM(H) 14

ISWHA56 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 6MM(H) 14

ISWHA58 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 8MM(H) 14

ISWHA62 CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 2MM(H) 14

ISWHA63 CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 3MM(H) 14

ISWHA64 CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 4MM(H) 14

ISWHA66 CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 6MM(H) 14

ISWHA68 CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 8MM(H) 14

ITHA52

CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 2MM(H)

ITHA53 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 3MM(H) 13

ITHA54 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 4MM(H) 13

ITHA56 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 6MM(H) 13

ITHA58 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 8MM(H) 13

ITHA63 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 3MM(H) 13

ITHA64 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 4MM(H) 13

ITHA66 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 6MM(H) 13

ITHA68 CERTAIN EP 1-PC HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 8MM(H) 13

IWTH52 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 2MM(H) 14

IWTH53 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 3MM(H) 14

IWTH54 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 4MM(H) 14

IWTH56 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 6MM(H) 14

IWTH562 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 6MM(P) X 2MM(H) 14

IWTH563 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 6MM(P) X 3MM(H) 14

IWTH564 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 6MM(P) X 4MM(H) 14

IWTH566 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 6MM(P) X 6MM(H) 14

IWTH568 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 6MM(P) X 8MM(H) 14

IWTH58 CERTAIN EP 1-PC HEALING ABUTMENT, 5MM(D) X 5MM(P) X 8MM(H) 14

IWTH62 CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 2MM(H) 14

IWTH63 CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 3MM(H) 14

IWTH64 CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 4MM(H) 14

IWTH66 CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 6MM(H) 14

IWTH68 CERTAIN EP 1-PC HEALING ABUTMENT, 6MM(D) X 6MM(P) X 8MM(H) 14

LPCBP3 LOW PROFILE ABUTMENT BONE PROFILER, 3.4MM(D) 36

LPCBP4 LOW PROFILE ABUTMENT BONE PROFILER, 4.1MM(D) 36

LPCBP5 LOW PROFILE ABUTMENT BONE PROFILER, 5MM(D) 36

MALL1 MALLET, STAINLESS STEEL 39

MDR10 HANDPIECE CONNECTOR 22,26,30,32,34,40

ME100 SMALL MEMBRANE ELEVATOR 42

ME200 MEDIUM MEMBRANE ELEVATOR 42

ME300 LARGE MEMBRANE ELEVATOR 42

MHA32 EP 1-PIECE HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 2MM(H) 16

MHA33 EP 1-PIECE HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 3MM(H) 16

MHA34 EP 1-PIECE HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 4MM(H) 16

MHA36 EP 1-PIECE HEALING ABUTMENT, 3.4MM(D) X 3.8MM(P) X 6MM(H) 16

MIDTH MANUAL INTERCHANGEABLE DRIVER TIP HANDLE 39

MMC03 IMPLANT MOUNT, 3.4MM(D) X 3MM(L) 38

MMC15 IMPLANT MOUNT, 3.4MM(D) X 15MM(L) 30,32,34,38

MMCS1 IMPLANT COVER SCREW, 3.4MM(D) X 1MM(H) 7,8,9,10

MMKIT IMPLANT MOUNT KIT, 3.4MM(D) 38

MSGIAM1 NAVIGATOR®CERTAIN ANALOG MOUNT, 3.4MM(D) X 1(L) 27

MSGIAM2 NAVIGATOR CERTAIN ANALOG MOUNT, 3.4MM(D) X 2(L) 27

MSGIAM3 NAVIGATOR CERTAIN ANALOG MOUNT, 3.4MM(D) X 3(L) 27

MSGIAM4 NAVIGATOR CERTAIN ANALOG MOUNT, 3.4MM(D) X 4(L) 27

MSGIAML NAVIGATOR CERTAIN ANALOG MOUNT, 3.4MM(D) - LONG 24

MSGIAMS NAVIGATOR CERTAIN ANALOG MOUNT, 3.4MM(D) - SHORT 24

MSGIIML NAVIGATOR CERTAIN IMPLANT MOUNT, 3.4MM(D) - LONG 22

MSGIIMS NAVIGATOR CERTAIN IMPLANT MOUNT, 3.4MM(D) - SHORT 22

MSGIIM1 NAVIGATOR CERTAIN IMPLANT MOUNT, 3.4MM(D) X 1(L) 26

MSGIIM2 NAVIGATOR CERTAIN IMPLANT MOUNT, 3.4MM(D) X 2(L) 26

MSGIIM3 NAVIGATOR CERTAIN IMPLANT MOUNT, 3.4MM(D) X 3(L) 26

MSGIIM4 NAVIGATOR CERTAIN IMPLANT MOUNT, 3.4MM(D) X 4(L) 26

MSGSD NAVIGATOR STARTER DRILL, 3.4MM(D) 25

MSGTAP NAVIGATOR BONE TAP, 3.25MM(D) 26

MSGTCDL TAPERED NAVIGATOR COUNTERSINK DRILL, 3.4MM(D) - LONG 21

MSGTCDS TAPERED NAVIGATOR COUNTERSINK DRILL, 3.4MM(D) - SHORT 21

MSGTD10L TAPERED NAVIGATOR SHAPING DRILL, 22

3.25MM(D) X 10MM(L) - LONG

MSGTD10S TAPERED NAVIGATOR SHAPING DRILL, 21

3.25MM(D) X 10MM(L) - SHORT

MSGTD11L TAPERED NAVIGATOR SHAPING DRILL, 22

3.25MM(D) X 11.5MM(L) - LONG

MSGTD11S TAPERED NAVIGATOR SHAPING DRILL, 21

3.25MM(D) X 11.5MM(L) - SHORT

MSGTD13L TAPERED NAVIGATOR SHAPING DRILL, 22

3.25MM(D) X 13MM(L) - LONG

MSGTD13S TAPERED NAVIGATOR SHAPING DRILL, 21

3.25MM(D) X 13MM(L) - SHORT

MSGTD15L TAPERED NAVIGATOR SHAPING DRILL, 22

3.25MM(D) X 15MM(L) - LONG

MSGTD15S TAPERED NAVIGATOR SHAPING DRILL, 21

3.25MM(D) X 15MM(L) - SHORT

MSGTD85L TAPERED NAVIGATOR SHAPING DRILL, 22

3.25MM(D) X 8.5MM(L) - LONG

MSGTD85S TAPERED NAVIGATOR SHAPING DRILL, 21

3.25MM(D) X 8.5MM(L) - SHORT

MSGTT10L TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 10(L) - LONG 23

MSGTT10S TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 10(L) - SHORT 23

MSGTT11L TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 11.5(L) - LONG 23

MSGTT11S TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 11.5(L) - SHORT 23

MSGTT13L TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 13(L) - LONG 23

MSGTT13S TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 13(L) - SHORT 23

MSGTT15L TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 15(L) - LONG 23

MSGTT15S TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 15(L) - SHORT 23

MSGTT85L TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 8.5(L) - LONG 23

MSGTT85S TAPERED NAVIGATOR BONE TAP, 3.25MM(D) X 8.5(L) - SHORT 23

MTAP1

DENSE BONE TAP FOR PARALLEL WALLED IMPLANTS, 3.25MM(D) - SHORT

MTAP2

DENSE BONE TAP FOR PARALLEL WALLED IMPLANTS, 3.25MM(D) - LONG

32,33,37

NIITP4310 NANOTITE™ TAPERED CERTAIN PREVAIL®IMPLANT, 3

4MM(D) X 3MM(P) X 10MM(L)

NIITP4311 NANOTITE TAPERED CERTAIN PREVAIL IMPLANT, 3

4MM(D) X 3MM(P) X 11.5MM(L)

NIITP4313 NANOTITE TAPERED CERTAIN PREVAIL IMPLANT, 3

4MM(D) X 3MM(P) X 13MM(L)

NIITP4315 NANOTITE TAPERED CERTAIN PREVAIL IMPLANT, 3

4MM(D) X 3MM(P) X 15MM(L)

NIITP4385 NANOTITE TAPERED CERTAIN PREVAIL IMPLANT, 3

4MM(D) X 3MM(P) X 8.5MM(L)

NIITP5410 NANOTITE TAPERED CERTAIN PREVAIL IMPLANT, 3

5MM(D) X 4MM(P) X 10MM(L)

NIITP5411 NANOTITE TAPERED CERTAIN PREVAIL IMPLANT, 3

5MM(D) X 4MM(P) X 11.5MM(L)

NIITP5413 NANOTITE TAPERED CERTAIN PREVAIL IMPLANT, 3

5MM(D) X 4MM(P) X 13MM(L)

NIITP5415 NANOTITE TAPERED CERTAIN PREVAIL IMPLANT, 3

5MM(D) X 4MM(P) X 15MM(L)

Index

Item# Description Page# Item# Description Page#

NIITP5485 NANOTITE™ TAPERED CERTAIN®PREVAIL®IMPLANT, 3

5MM(D) X 4MM(P) X 8.5MM(L)

NIITP6510 NANOTITE TAPERED CERTAIN PREVAIL IMPLANT, 3

6MM(D) X 5MM(P) X 10MM(L)

NIITP6511 NANOTITE TAPERED CERTAIN PREVAIL IMPLANT, 3

6MM(D) X 5MM(P) X 11.5MM(L)

NIITP6513 NANOTITE TAPERED CERTAIN PREVAIL IMPLANT, 3

6MM(D) X 5MM(P) X 13MM(L)

NIITP6515 NANOTITE TAPERED CERTAIN PREVAIL IMPLANT, 3

6MM(D) X 5MM(P) X 15MM(L)

NIITP6585 NANOTITE TAPERED CERTAIN PREVAIL IMPLANT, 3

6MM(D) X 5MM(P) X 8.5MM(L)

NINT3210 NANOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 10MM(L) 3

NINT3211 NANOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 11.5MM(L) 3

NINT3213 NANOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 13MM(L) 3

NINT3215 NANOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 15MM(L) 3

NINT3285 NANOTITE TAPERED CERTAIN IMPLANT, 3.25MM(D) X 8.5MM(L) 3

NINT410 NANOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 10MM(L) 3

NINT411 NANOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 11.5MM(L) 3

NINT413 NANOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 13MM(L) 3

NINT415 NANOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 15MM(L) 3

NINT485 NANOTITE TAPERED CERTAIN IMPLANT, 4MM(D) X 8.5MM(L) 3

NINT510 NANOTITE TAPERED CERTAIN IMPLANT, 5MM(D) X 10MM(L) 3

NINT511 NANOTITE TAPERED CERTAIN IMPLANT, 5MM(D) X 11.5MM(L) 3

NINT513 NANOTITE TAPERED CERTAIN IMPLANT, 5MM(D) X 13MM(L) 3

NINT515 NANOTITE TAPERED CERTAIN IMPLANT, 5MM(D) X 15MM(L) 3

NINT585 NANOTITE TAPERED CERTAIN IMPLANT, 5MM(D) X 8.5MM(L) 3

NINT610 NANOTITE TAPERED CERTAIN IMPLANT, 6MM(D) X 10MM(L) 3

NINT611 NANOTITE TAPERED CERTAIN IMPLANT, 6MM(D) X 11.5MM(L) 3

NINT613 NANOTITE TAPERED CERTAIN IMPLANT, 6MM(D) X 13MM(L) 3

NINT615 NANOTITE TAPERED CERTAIN IMPLANT, 6MM(D) X 15MM(L) 3

NINT685 NANOTITE TAPERED CERTAIN IMPLANT, 6MM(D) X 8.5MM(L) 3

NIIOS4310 NANOTITE CERTAIN PREVAIL IMPLANT, 4

4MM(D) X 3.4MM(C) X 10MM(L)

NIIOS4311 NANOTITE CERTAIN PREVAIL IMPLANT, 4

4MM(D) X 3.4MM(C) X 11.5MM(L)

NIIOS4313 NANOTITE CERTAIN PREVAIL IMPLANT, 4

4MM(D) X 3.4MM(C) X 13MM(L)

NIIOS4315 NANOTITE CERTAIN PREVAIL IMPLANT, 4

4MM(D) X 3.4MM(C) X 15MM(L)

NIIOS4385 NANOTITE CERTAIN PREVAIL IMPLANT, 4

4MM(D) X 3.4MM(C) X 8.5MM(L)

NIIOS5485 NANOTITE CERTAIN PREVAIL IMPLANT, 4

5MM(D) X 4.1MM(P) X 8.5MM(L)

NIIOS5410 NANOTITE CERTAIN PREVAIL IMPLANT, 4

5MM(D) X 4.1MM(P) X 10MM(L)

NIIOS5411 NANOTITE CERTAIN PREVAIL IMPLANT, 4

5MM(D) X 4.1MM(P) X 11MM(L)

NIIOS5413 NANOTITE CERTAIN PREVAIL IMPLANT, 4

5MM(D) X 4.1MM(P) X 13MM(L)

NIIOS5415 NANOTITE CERTAIN PREVAIL IMPLANT, 4

5MM(D) X 4.1MM(P) X 15MM(L)

NIOSM310 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5

3.25MM(D) X 10MM(L)

NIOSM311 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5

3.25MM(D) X 11.5MM(L)

NIOSM313 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5

3.25MM(D) X 13MM(L)

NIOSM315 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5

3.25MM(D) X 15MM(L)

NIOSM318 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5

3.25MM(D) X 18MM(L)

NIOSM385 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5

3.25MM(D) X 8.5MM(L)

NIOSS410 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5

4MM(D) X 10MM(L)

NIOSS411 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5

4MM(D) X 11.5MM(L)

NIOSS413 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5

4MM(D) X 13MM(L)

NIOSS415 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5

4MM(D) X 15MM(L)

NIOSS418 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5

4MM(D) X 18MM(L)

NIOSS485 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5

4MM(D) X 8.5MM(L)

NIOSS510 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5

5MM(D) X 10MM(L)

NIOSS511 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5

5MM(D) X 11.5MM(L)

NIOSS513 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5MM(D) X 13MM(L) 5

NIOSS515

NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5MM(D) X 15MM(L)

NIOSS585 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 5MM(D) X 8.5MM(L) 5

NIOSS610 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 6MM(D) X 10MM(L) 5

NIOSS611 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 6MM(D) X 11.5MM(L) 5

NIOSS613 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 6MM(D) X 13MM(L) 5

NIOSS615 NANOTITE PARALLEL WALLED CERTAIN IMPLANT, 6MM(D) X 15MM(L) 5

NNT3210 NANOTITE TAPERED IMPLANT, 3.25MM(D) X 10MM(L) 7

NNT3211 NANOTITE TAPERED IMPLANT, 3.25MM(D) X 11.5MM(L) 7

NNT3213 NANOTITE TAPERED IMPLANT, 3.25MM(D) X 13MM(L) 7

NNT3215 NANOTITE TAPERED IMPLANT, 3.25MM(D) X 15MM(L) 7

NNT3285 NANOTITE TAPERED IMPLANT, 3.25MM(D) X 8.5MM(L) 7

NNT410 NANOTITE TAPERED IMPLANT, 4MM(D) X 10MM(L) 7

NNT411 NANOTITE TAPERED IMPLANT, 4MM(D) X 11.5MM(L) 7

NNT413 NANOTITE TAPERED IMPLANT, 4MM(D) X 13MM(L) 7

NNT415 NANOTITE TAPERED IMPLANT, 4MM(D) X 15MM(L) 7

NNT485 NANOTITE TAPERED IMPLANT, 4MM(D) X 8.5MM(L) 7

NNT510 NANOTITE TAPERED IMPLANT, 5MM(D) X 10MM(L) 7

NNT511 NANOTITE TAPERED IMPLANT, 5MM(D) X 11.5MM(L) 7

NNT513 NANOTITE TAPERED IMPLANT, 5MM(D) X 13MM(L) 7

NNT515 NANOTITE TAPERED IMPLANT, 5MM(D) X 15MM(L) 7

NNT585 NANOTITE TAPERED IMPLANT, 5MM(D) X 8.5MM(L) 7

NNT610 NANOTITE TAPERED IMPLANT, 6MM(D) X 10MM(L) 7

NNT611 NANOTITE TAPERED IMPLANT, 6MM(D) X 11.5MM(L) 7

NNT613 NANOTITE TAPERED IMPLANT, 6MM(D) X 13MM(L) 7

NNT615 NANOTITE TAPERED IMPLANT, 6MM(D) X 15MM(L) 7

NNT685 NANOTITE TAPERED IMPLANT, 6MM(D) X 8.5MM(L) 7

NOSM310 NANOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 10MM(L) 9

NOSM311 NANOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L) 9

NOSM313 NANOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 13MM(L) 9

NOSM315 NANOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 15MM(L) 9

NOSM318 NANOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 18MM(L) 9

NOSM385 NANOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 8.5MM(L) 9

NOSS407 NANOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 7MM(L) 9

NOSS410 NANOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 10MM(L) 9

NOSS411 NANOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L) 9

NOSS413 NANOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 13MM(L) 9

NOSS415 NANOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 15MM(L) 9

Index

Item# Description Page# Item# Description Page#

NOSS418 NANOTITE™ PARALLEL WALLED IMPLANT, 4MM(D) X 18MM(L) 9

NOSS485 NANOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 8.5MM(L) 9

NOSS507 NANOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 7MM(L) 9

NOSS510 NANOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 10MM(L) 9

NOSS511 NANOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 11.5MM(L) 9

NOSS513 NANOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 13MM(L) 9

NOSS515 NANOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 15MM(L) 9

NOSS518 NANOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 18MM(L) 9

NOSS585 NANOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 8.5MM(L) 9

NOSS607 NANOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 7MM(L) 9

NOSS610 NANOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 10MM(L) 9

NOSS611 NANOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 11.5MM(L) 9

NOSS613 NANOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 13MM(L) 9

NOSS615 NANOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 15MM(L) 9

NOSS618 NANOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 18MM(L) 9

NOSS685 NANOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 8.5MM(L) 9

NT3210 OSSEOTITE®TAPERED IMPLANT, 3.25MM(D) X 10MM(L) 8

NT3211 OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 11.5MM(L) 8

NT3213 OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 13MM(L) 8

NT3215 OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 15MM(L) 8

NT3285 OSSEOTITE TAPERED IMPLANT, 3.25MM(D) X 8.5MM(L) 8

NT410 OSSEOTITE TAPERED IMPLANT, 4MM(D) X 10MM(L) 8

NT411 OSSEOTITE TAPERED IMPLANT, 4MM(D) X 11.5MM(L) 8

NT413 OSSEOTITE TAPERED IMPLANT, 4MM(D) X 13MM(L) 8

NT415 OSSEOTITE TAPERED IMPLANT, 4MM(D) X 15MM(L) 8

NT485 OSSEOTITE TAPERED IMPLANT, 4MM(D) X 8.5MM(L) 8

NT510 OSSEOTITE TAPERED IMPLANT, 5MM(D) X 10MM(L) 8

NT511 OSSEOTITE TAPERED IMPLANT, 5MM(D) X 11.5MM(L) 8

NT513 OSSEOTITE TAPERED IMPLANT, 5MM(D) X 13MM(L) 8

NT515 OSSEOTITE TAPERED IMPLANT, 5MM(D) X 15MM(L) 8

NT585 OSSEOTITE TAPERED IMPLANT, 5MM(D) X 8.5MM(L) 8

NT610 OSSEOTITE TAPERED IMPLANT, 6MM(D) X 10MM(L) 8

NT611 OSSEOTITE TAPERED IMPLANT, 6MM(D) X 11.5MM(L) 8

NT613 OSSEOTITE TAPERED IMPLANT, 6MM(D) X 13MM(L) 8

NT615 OSSEOTITE TAPERED IMPLANT, 6MM(D) X 15MM(L) 8

NT685 OSSEOTITE TAPERED IMPLANT, 6MM(D) X 8.5MM(L) 8

NTAP3210 DENSE BONE TAP FOR TAPERED IMPLANTS, 3.25MM(D) X 10MM(L) 28,37

NTAP3211 DENSE BONE TAP FOR TAPERED IMPLANTS, 3.25MM(D) X 11.5MM(L)

28,37

NTAP3213 DENSE BONE TAP FOR TAPERED IMPLANTS, 3.25MM(D) X 13MM(L) 28,37

NTAP3215 DENSE BONE TAP FOR TAPERED IMPLANTS, 3.25MM(D) X 15MM(L) 28,37

NTAP3285 DENSE BONE TAP FOR TAPERED IMPLANTS, 3.25MM(D) X 8.5MM(L) 28,37

NTAP410 DENSE BONE TAP FOR TAPERED IMPLANTS, 4MM(D) X 10MM(L) 28,37

NTAP411 DENSE BONE TAP FOR TAPERED IMPLANTS, 4MM(D) X 11.5MM(L) 28,37

NTAP413 DENSE BONE TAP FOR TAPERED IMPLANTS, 4MM(D) X 13MM(L) 28,37

NTAP415 DENSE BONE TAP FOR TAPERED IMPLANTS, 4MM(D) X 15MM(L) 28,37

NTAP485 DENSE BONE TAP FOR TAPERED IMPLANTS, 4MM(D) X 8.5MM(L) 28,37

NTAP510 DENSE BONE TAP FOR TAPERED IMPLANTS, 5MM(D) X 10MM(L) 28,37

NTAP511 DENSE BONE TAP FOR TAPERED IMPLANTS, 5MM(D) X 11.5MM(L) 29,37

NTAP513 DENSE BONE TAP FOR TAPERED IMPLANTS, 5MM(D) X 13MM(L) 29,37

NTAP515 DENSE BONE TAP FOR TAPERED IMPLANTS, 5MM(D) X 15MM(L) 29,37

NTAP585 DENSE BONE TAP FOR TAPERED IMPLANTS, 5MM(D) X 8.5MM(L) 28,37

NTAP610 DENSE BONE TAP FOR TAPERED IMPLANTS, 6MM(D) X 10MM(L) 29,37

NTAP611 DENSE BONE TAP FOR TAPERED IMPLANTS, 6MM(D) X 11.5MM(L) 29,37

NTAP613 DENSE BONE TAP FOR TAPERED IMPLANTS, 6MM(D) X 13MM(L) 29,37

NTAP615 DENSE BONE TAP FOR TAPERED IMPLANTS, 6MM(D) X 15MM(L) 29,37

NTAP685 DENSE BONE TAP FOR TAPERED IMPLANTS, 6MM(D) X 8.5MM(L) 29,37

NTAPK DENSE BONE TAP KIT 37

NTAPKT DENSE BONE TAP KIT TRAY FOR TAPERED IMPLANTS 29

NTDI3210 OSSEOTITE TAPERED DEPTH INDICATOR, 3.25MM X 10MM 29,38

NTDI3211 OSSEOTITE TAPERED DEPTH INDICATOR, 3.25MM X 11.5MM 29,38

NTDI3213 OSSEOTITE TAPERED DEPTH INDICATOR, 3.25MM X 13MM 29,38

NTDI3215 OSSEOTITE TAPERED DEPTH INDICATOR, 3.25MM X 15MM 29,38

NTDI3285 OSSEOTITE TAPERED DEPTH INDICATOR, 3.25MM X 8.5MM 29,38

NTDI410 OSSEOTITE TAPERED DEPTH INDICATOR, 4MM X 10MM 29,38

NTDI411 OSSEOTITE TAPERED DEPTH INDICATOR, 4MM X 11.5MM 29,38

NTDI413 OSSEOTITE TAPERED DEPTH INDICATOR, 4MM X 13MM 29,38

NTDI415 OSSEOTITE TAPERED DEPTH INDICATOR, 4MM X 15MM 29,38

NTDI485 OSSEOTITE TAPERED DEPTH INDICATOR, 4MM X 8.5MM 29,38

NTDI510 OSSEOTITE TAPERED DEPTH INDICATOR, 5MM X 10MM 29,38

NTDI511 OSSEOTITE TAPERED DEPTH INDICATOR, 5MM X 11.5MM 29,38

NTDI513 OSSEOTITE TAPERED DEPTH INDICATOR, 5MM X 13MM 29,38

NTDI515 OSSEOTITE TAPERED DEPTH INDICATOR, 5MM X 15MM 29,38

NTDI585 OSSEOTITE TAPERED DEPTH INDICATOR, 5MM X 8.5MM 29,38

NTDI610 OSSEOTITE TAPERED DEPTH INDICATOR, 6MM X 10MM 29,38

NTDI611 OSSEOTITE TAPERED DEPTH INDICATOR, 6MM X 11.5MM 29,38

NTDI613 OSSEOTITE TAPERED DEPTH INDICATOR, 6MM X 13MM 29,38

NTDI615 OSSEOTITE TAPERED DEPTH INDICATOR, 6MM X 15MM 29,38

NTDI685 OSSEOTITE TAPERED DEPTH INDICATOR, 6MM X 8.5MM 29,38

NTDIK OSSEOTITE TAPERED DIRECTION/DEPTH INDICATOR KIT 38

NTOST0 OSSEOTITE TAPERED OSTEOTOME SYSTEM KIT, STRAIGHT 41

NTOST0A OSSEOTITE TAPERED OSTEOTOME SYSTEM KIT, ANGLED 41

NTOST3 OSSEOTITE TAPERED STRAIGHT OSTEOTOME, 3.25MM 41

NTOST3A OSSEOTITE TAPERED ANGLED OSTEOTOME, 3.25MM 41

NTOST4 OSSEOTITE TAPERED STRAIGHT OSTEOTOME, 4MM 41

NTOST4A OSSEOTITE TAPERED ANGLED OSTEOTOME, 4MM 41

NTOST5 OSSEOTITE TAPERED STRAIGHT OSTEOTOME, 5MM 41

NTOST5A OSSEOTITE TAPERED ANGLED OSTEOTOME, 5MM 41

NTOST6 OSSEOTITE TAPERED STRAIGHT OSTEOTOME, 6MM 41

NTOST6A OSSEOTITE TAPERED ANGLED OSTEOTOME, 6MM 41

NTOSTTRA OSSEOTITE TAPERED OSTEOTOME TRAY, ANGLED 41

NTOSTTRS OSSEOTITE TAPERED OSTEOTOME TRAY, STRAIGHT 41

OG1520 OSSEOGUARD®RESORBABLE COLLAGEN MEMBRANE, 15MM X 20MM 47

OG2030 OSSEOGUARD RESORBABLE COLLAGEN MEMBRANE, 20MM X 30MM 47

OG3040 OSSEOGUARD RESORBABLE COLLAGEN MEMBRANE, 30MM X 40MM 47

OGF1520 OSSEOGUARD FLEX®RESORBABLE COLLAGEN MEMBRANE, 15MM X 20MM 47

OGF2030 OSSEOGUARD FLEX RESORBABLE COLLAGEN MEMBRANE, 20MM X 30MM 47

OGF3040 OSSEOGUARD FLEX RESORBABLE COLLAGEN MEMBRANE, 30MM X 40MM 47

OSM310 OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 10MM(L) 10

OSM311 OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L) 10

OSM313 OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 13MM(L) 10

OSM315 OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 15MM(L) 10

OSM318 OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 18MM(L) 10

OSM385 OSSEOTITE PARALLEL WALLED IMPLANT, 3.25MM(D) X 8.5MM(L) 10

OSS310 OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 6MM(L) 10

OSS311 OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 11.5MM(L) 10

OSS313 OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 13MM(L) 10

OSS315 OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 15MM(L) 10

OSS318 OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 18MM(L) 10

OSS320 OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 20MM(L) 10

OSS385 OSSEOTITE PARALLEL WALLED IMPLANT, 3.75MM(D) X 8.5MM(L) 10

OSS410 OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 6MM(L) 10

OSS411 OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L) 10

OSS413 OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 13MM(L) 10

OSS415 OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 15MM(L) 10

Index

Item# Description Page# Item# Description Page#

OSS418 OSSEOTITE®PARALLEL WALLED IMPLANT, 4MM(D) X 18MM(L) 10

OSS420 OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 20MM(L) 10

OSS485 OSSEOTITE PARALLEL WALLED IMPLANT, 4MM(D) X 8.5MM(L) 10

OSS507 OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 7MM(L) 10

OSS510 OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 10MM(L) 10

OSS511 OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 11.5MM(L) 10

OSS513 OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 13MM(L) 10

OSS515 OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 15MM(L) 10

OSS518 OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 18MM(L) 10

OSS585 OSSEOTITE PARALLEL WALLED IMPLANT, 5MM(D) X 8.5MM(L) 10

OSS607 OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 7MM(L) 10

OSS610 OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 10MM(L) 10

OSS611 OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 11.5MM(L) 10

OSS613 OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 13MM(L) 10

OSS615 OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 15MM(L) 10

OSS618 OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 18MM(L) 10

OSS685 OSSEOTITE PARALLEL WALLED IMPLANT, 6MM(D) X 8.5MM(L) 10

OST00 SUMMERS OSTEOTOME KIT #1-4 41

OST01 SUMMERS OSTEOTOME #1 41

OST02 SUMMERS OSTEOTOME #2 41

OST03 SUMMERS OSTEOTOME #3 41

OST04 SUMMERS OSTEOTOME #4 41

OST05 SUMMERS OSTEOTOME #5 41

OST10 SUMMERS OSTEOTOME KIT #1-5 41

OST20 SUMMERS OSTEOTOME KIT #1-5 AND FUTURE SITE 41

OSTFS SUMMERS OSTEOTOME FOR FUTURE SITE 41

OSTTR SUMMERS OSTEOTOME SYSTEM TRAY 41

PD100 PILOT REUSABLE DRILL, 2-3MM 32,33,35

PEMODLOC PATIENT ED MODEL - LOCATOR

PEMODSM PATIENT ED MODEL - SINGLE/MULTIPLE TEETH 48

PHD00N NARROW POSTERIOR SMALL HEX DRIVER, 17MM 30,32,34

PHD02N NARROW POSTERIOR LARGE HEX DRIVER, 17MM 22,26,30,32,34

PSKT01 STARTER KIT 31,32

PSKT10 BASIC SURGICAL KIT - PLASTIC 33,34

PSKT20 STANDARD UNISYSTEM SURGICAL KIT - PLASTIC 33,34

PSKT30 PREMIUM UNISYSTEM SURGICAL KIT 33,34

PSKT35 CERTAIN

PREMIUM SURGICAL KIT 31,32

PSKT40

CERTAIN PREMIUM SURGICAL KIT FOR PARALLEL WALLED IMPLANT

31,32

PTT100 PLASTIC TRAY ORGANIZER 31,33,34

PTT300I PLASTIC SURGICAL TRAY ORGANIZER 31,33

QBM001 R. QUÉTIN BONE MILL 47

QNTSK20 TAPERED IMPLANT STARTER (BASIC) KIT 28,29,30

QNTSK40

TAPERED IMPLANT QUAD SHAPING DRILL, PREMIUM SURGICAL KIT

28,29,30

QNTSK40U

TAPERED IMPLANT QUAD SHAPING DRILL, PREMIUM UPGRADE KIT

28,29,30

QNTSKT QSD/NTDI SURGICAL TRAY 29

QSD3210 QUAD SHAPING DRILL, 3.25MM(D) X 10MM(L) 28,35

QSD3211 QUAD SHAPING DRILL, 3.25MM(D) X 11.5MM(L) 28,35

QSD3213 QUAD SHAPING DRILL, 3.25MM(D) X 13MM(L) 28,35

QSD3215 QUAD SHAPING DRILL, 3.25MM(D) X 15MM(L) 28,35

QSD3285 QUAD SHAPING DRILL, 3.25MM(D) X 8.5MM(L) 28,35

QSD410 QUAD SHAPING DRILL, 4MM(D) X 10MM(L) 28,35

QSD411 QUAD SHAPING DRILL, 4MM(D) X 11.5MM(L) 28,35

QSD413 QUAD SHAPING DRILL, 4MM(D) X 13MM(L) 28,35

QSD415 QUAD SHAPING DRILL, 4MM(D) X 15MM(L) 28,35

QSD485 QUAD SHAPING DRILL, 4MM(D) X 8.5MM(L) 28,35

QSD510 QUAD SHAPING DRILL, 5MM(D) X 10MM(L) 28,35

QSD511 QUAD SHAPING DRILL, 5MM(D) X 11.5MM(L) 28,35

QSD513 QUAD SHAPING DRILL, 5MM(D) X 13MM(L) 28,35

QSD515 QUAD SHAPING DRILL, 5MM(D) X 15MM(L) 28,35

QSD585 QUAD SHAPING DRILL, 5MM(D) X 8.5MM(L) 28,35

QSD610 QUAD SHAPING DRILL, 6MM(D) X 10MM(L) 28,35

QSD611 QUAD SHAPING DRILL, 6MM(D) X 11.5MM(L) 28,35

QSD613 QUAD SHAPING DRILL, 6MM(D) X 13MM(L) 28,35

QSD615 QUAD SHAPING DRILL, 6MM(D) X 15MM(L) 28,35

QSD685 QUAD SHAPING DRILL, 6MM(D) X 8.5MM(L) 28,35

RASH3N

NARROW RIGHT ANGLE LARGE HEXED DRIVER TIP, 24MM(L)

22,26,30,32,34

RDCA205 CANCELLOUS, PARTIALLY DEMINERALIZED, 0.5CC, 200-300µm 45

RDCA210 CANCELLOUS, PARTIALLY DEMINERALIZED, 1CC, 200-300µm 45

RDCA220 CANCELLOUS, PARTIALLY DEMINERALIZED, 2CC, 200-300µm 45

RDCA305 CANCELLOUS, PARTIALLY DEMINERALIZED, 0.5CC, 300-500µm 45

RDCA305R

CANCELLOUS, PARTIALLY DEMINERALIZED, IRRADIATED, 0.5CC, 300-500µm

RDCA310 CANCELLOUS, PARTIALLY DEMINERALIZED, 1CC, 300-500µm 45

RDCA310R

CANCELLOUS, PARTIALLY DEMINERALIZED, IRRADIATED, 1CC, 300-500µm

RDCA320 CANCELLOUS, PARTIALLY DEMINERALIZED, 2CC, 300-500µm 45

RDCA320R

CANCELLOUS, PARTIALLY DEMINERALIZED, IRRADIATED, 2CC, 300-500µm

RDCA505 CANCELLOUS, PARTIALLY DEMINERALIZED, 0.5CC, 500-800µm 45

RDCA510 CANCELLOUS, PARTIALLY DEMINERALIZED, 1CC, 500-800µm 45

RDCA520 CANCELLOUS, PARTIALLY DEMINERALIZED, 2CC, 500-800µm 45

RDCO205 CORTICAL, PARTIALLY DEMINERALIZED, 0.5CC, 200-300µm 45

RDCO205R

CORTICAL, PARTIALLY DEMINERALIZED, IRRADIATED, 0.5CC, 200-300µm 46

RDCO210 CORTICAL, PARTIALLY DEMINERALIZED, 1CC, 200-300µm 45

RDCO220 CORTICAL, PARTIALLY DEMINERALIZED, 2CC, 200-300µm 45

RDCO305 CORTICAL, PARTIALLY DEMINERALIZED, 0.5CC, 300-500µm 45

RDCO305R

CORTICAL, PARTIALLY DEMINERALIZED, IRRADIATED, 0.5CC, 300-500µm

RDCO310 CORTICAL, PARTIALLY DEMINERALIZED, 1CC, 300-500µm 45

RDCO310R CORTICAL, PARTIALLY DEMINERALIZED, IRRADIATED, 1CC, 300-500µm 46

RDCO320 CORTICAL, PARTIALLY DEMINERALIZED, 2CC, 300-500µm 45

RDCO320R CORTICAL, PARTIALLY DEMINERALIZED, IRRADIATED, 2CC, 300-500µm 46

RDCO505 CORTICAL, PARTIALLY DEMINERALIZED, 0.5CC, 500-800µm 45

RDCO510 CORTICAL, PARTIALLY DEMINERALIZED, 1CC, 500-800µm 45

RDCO520 CORTICAL, PARTIALLY DEMINERALIZED, 2CC, 500-800µm 45

RD100 STAINLESS STEEL ROUND DRILL, 2MM(D) 32,34,35

RE100 RATCHET EXTENSION - SHORT, 6MM(L) 22,26,29,32,34,39

RE200 RATCHET EXTENSION - LONG, 15MM(L) 22,26,29,32,34,39

RMB30 RADIOGRAPHIC MARKING BALLS (30-PACK) 40

RMCA205 CANCELLOUS, MINERALIZED, 0.5CC, 200-300µm 45

RMCA205R CANCELLOUS, MINERALIZED, IRRADIATED, 0.5CC, 200-300µm 46

RMCA210 CANCELLOUS, MINERALIZED, 1CC, 200-300µm 45

RMCA220 CANCELLOUS, MINERALIZED, 2CC, 200-300µm 45

RMCA305 CANCELLOUS, MINERALIZED, 0.5CC, 300-500µm 45

RMCA305R CANCELLOUS, MINERALIZED, IRRADIATED, 0.5CC, 300-500µm 46

RMCA310 CANCELLOUS, MINERALIZED, 1CC, 300-500µm 45

RMCA310R CANCELLOUS, MINERALIZED, IRRADIATED, 1CC, 300-500µm 46

RMCA320 CANCELLOUS, MINERALIZED, 2CC, 300-500µm 45

RMCA505 CANCELLOUS, MINERALIZED, 0.5CC, 500-800µm 45

RMCA510 CANCELLOUS, MINERALIZED, 1CC, 500-800µm 45

RMCA520 CANCELLOUS, MINERALIZED, 2CC, 500-800µm 45

RMCO205 CORTICAL, MINERALIZED, 0.5CC, 200-300µm 45

RMCO210 CORTICAL, MINERALIZED, 1CC, 200-300µm 45

RMCO220 CORTICAL, MINERALIZED, 2CC, 200-300µm 45

RMCO305 CORTICAL, MINERALIZED, 0.5CC, 300-500µm 45

RMCO305R CORTICAL, MINERALIZED, IRRADIATED, 0.5CC, 300-500µm 46

RMCO310 CORTICAL, MINERALIZED, 1CC, 300-500µm 45

RMCO310R CORTICAL, MINERALIZED, IRRADIATED, 1CC, 300-500µm 46

Index

Item# Description Page# Item# Description Page#

RMCO320 CORTICAL, MINERALIZED, 2CC, 300-500µm 45

RMCO505 CORTICAL, MINERALIZED, 0.5CC, 500-800µm 45

RMCO510 CORTICAL, MINERALIZED, 1CC, 500-800µm 45

RMCO520 CORTICAL, MINERALIZED, 2CC, 500-800µm 45

ROAP05 REGENEROSS®ALLOGRAFT PUTTY, 0.5CC SYRINGE 46

ROAP10 REGENEROSS ALLOGRAFT PUTTY, 1CC SYRINGE 46

ROAP20 REGENEROSS ALLOGRAFT PUTTY, 2CC SYRINGE 46

ROAPM05 REGENEROSS ALLOGRAFT PUTTY PLUS, 0.5CC SYRINGE 46

ROAPM10 REGENEROSS ALLOGRAFT PUTTY PLUS, 1CC SYRINGE 46

ROAPM20 REGENEROSS ALLOGRAFT PUTTY PLUS, 2CC (4 X 0.5CC SYRINGES) 46

ROX05 ENDOBON®XENOGRAFT GRANULES, 0.5ML PACK 47

ROX10 ENDOBON XENOGRAFT GRANULES, 1ML PACK 47

ROX20 ENDOBON XENOGRAFT GRANULES, 2ML PACK 47

ROXLG20 ENDOBON XENOGRAFT GRANULES, 1000–2000µm, 2ML 47

ROXLG50 ENDOBON XENOGRAFT GRANULES, 1000–2000µm, 5ML 47

ROXLG80 ENDOBON XENOGRAFT GRANULES, 1000–2000µm, 8ML 47

SEKT1 SINUS ELEVATION KIT 42

SEKTR SINUS ELEVATION TRAY 42

SGD275A NAVIGATOR®TWIST DRILL 2.75MM(D) X A(L) 25

SGD275B NAVIGATOR TWIST DRILL, 2.75MM(D) X B(L) 25

SGD275C NAVIGATOR TWIST DRILL, 2.75MM(D) X C(L) 25

SGD275D NAVIGATOR TWIST DRILL, 2.75MM(D) X D(L) 25

SGD275E NAVIGATOR TWIST DRILL, 2.75MM(D) X E(L) 25

SGD275Y NAVIGATOR TWIST DRILL, 2.75MM(D) X Y(L) 26

SGD275Z NAVIGATOR TWIST DRILL, 2.75MM(D) X Z(L) 26

SGD2A NAVIGATOR TWIST DRILL, 2MM(D) X A(L) 25

SGD2B NAVIGATOR TWIST DRILL, 2MM(D) X B(L) 25

SGD2C NAVIGATOR TWIST DRILL, 2MM(D) X C(L) 25

SGD2D NAVIGATOR TWIST DRILL, 2MM(D) X D(L) 25

SGD2Y NAVIGATOR TWIST DRILL, 2MM(D) X Y(L) 26

SGD2Z NAVIGATOR TWIST DRILL, 2MM(D) X Z(L) 26

SGD325A NAVIGATOR TWIST DRILL, 3.25MM(D) X A(L) 25

SGD325B NAVIGATOR TWIST DRILL, 3.25MM(D) X B(L) 25

SGD325C NAVIGATOR TWIST DRILL, 3.25MM(D) X C(L) 25

SGD325D NAVIGATOR TWIST DRILL, 3.25MM(D) X D(L) 25

SGD325E NAVIGATOR TWIST DRILL, 3.25MM(D) X E(L) 25

SGD325Y NAVIGATOR TWIST DRILL, 3.25MM(D) X Y(L) 26

SGD325Z NAVIGATOR TWIST DRILL, 3.25MM(D) X Z(L) 26

SGD385A NAVIGATOR TWIST DRILL, 3.85MM(D) X A(L) 25

SGD385B NAVIGATOR TWIST DRILL, 3.85MM(D) X B(L) 25

SGD385C NAVIGATOR TWIST DRILL, 3.85MM(D) X C(L) 25

SGD385Y NAVIGATOR TWIST DRILL, 3.85MM(D) X Y(L) 26

SGD385Z NAVIGATOR TWIST DRILL, 3.85MM(D) X Z(L) 26

SGD3A NAVIGATOR TWIST DRILL, 3MM(D) X A(L) 25

SGD3B NAVIGATOR TWIST DRILL, 3MM(D) X B(L) 25

SGD3C NAVIGATOR TWIST DRILL, 3MM(D) X C(L) 25

SGD3D NAVIGATOR TWIST DRILL, 3MM(D) X D(L) 25

SGD3E NAVIGATOR TWIST DRILL, 3MM(D) X E(L) 25

SGD3Y NAVIGATOR TWIST DRILL, 3MM(D) X Y(L) 26

SGD3Z NAVIGATOR TWIST DRILL, 3MM(D) X Z(L) 26

SGD425A NAVIGATOR TWIST DRILL, 4.25MM(D) X A(L) 25

SGD425B NAVIGATOR TWIST DRILL, 4.25MM(D) X B(L) 26

SGD425C NAVIGATOR TWIST DRILL, 4.25MM(D) X C(L) 26

SGD425Y NAVIGATOR TWIST DRILL, 4.25MM(D) X Y(L) 26

SGD425Z NAVIGATOR TWIST DRILL, 4.25MM(D) X Z(L) 26

SGD2E NAVIGATOR TWIST DRILL, 2MM(D) X E(L) 25

SGDPH1 NAVIGATOR DRILL POSITIONING HANDLE 1 26

SGDPH2 NAVIGATOR DRILL POSITIONING HANDLE 2 26

SGDPH3 NAVIGATOR DRILL POSITIONING HANDLE 3 26

SGDPH4 NAVIGATOR DRILL POSITIONING HANDLE 4 26

SGDPH5 NAVIGATOR DRILL POSITIONING HANDLE 5 26

SGIAM4L NAVIGATOR CERTAIN®ANALOG MOUNT, 4.1MM(D) - LONG 24

SGIAM4S NAVIGATOR CERTAIN ANALOG MOUNT, 4.1MM(D) - SHORT 24

SGIAM5L NAVIGATOR CERTAIN ANALOG MOUNT, 5MM(D) - LONG 24

SGIAM5S NAVIGATOR CERTAIN ANALOG MOUNT, 5MM(D) - SHORT 24

SGIAM41 NAVIGATOR CERTAIN ANALOG MOUNT, 4.1MM(D) X 1(L) 27

SGIAM42 NAVIGATOR CERTAIN ANALOG MOUNT, 4.1MM(D) X 2(L) 27

SGIAM43 NAVIGATOR CERTAIN ANALOG MOUNT, 4.1MM(D) X 3(L) 27

SGIAM44 NAVIGATOR CERTAIN ANALOG MOUNT, 4.1MM(D) X 4(L) 27

SGIAM51 NAVIGATOR CERTAIN ANALOG MOUNT, 5MM(D) X 1(L) 27

SGIAM52 NAVIGATOR CERTAIN ANALOG MOUNT, 5MM(D) X 2(L) 27

SGIAM53 NAVIGATOR CERTAIN ANALOG MOUNT, 5MM(D) X 3(L) 27

SGIAM54 NAVIGATOR CERTAIN ANALOG MOUNT, 5MM(D) X 4(L) 27

SGIIM4L NAVIGATOR CERTAIN IMPLANT MOUNT, 4.1MM(D) - LONG 22

SGIIM4S NAVIGATOR CERTAIN IMPLANT MOUNT, 4.1MM(D) - SHORT 22

SGIIM5L NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) - LONG 22

SGIIM5S NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) - SHORT 22

SGIIM41 NAVIGATOR CERTAIN IMPLANT MOUNT, 4.1MM(D) X 1(L) 26

SGIIM42 NAVIGATOR CERTAIN IMPLANT MOUNT, 4.1MM(D) X 2(L) 26

SGIIM43 NAVIGATOR CERTAIN IMPLANT MOUNT, 4.1MM(D) X 3(L) 26

SGIIM44 NAVIGATOR CERTAIN IMPLANT MOUNT, 4.1MM(D) X 4(L) 26

SGIIM51 NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) X 1(L) 26

SGIIM52 NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) X 2(L) 26

SGIIM53 NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) X 3(L) 26

SGIIM54 NAVIGATOR CERTAIN IMPLANT MOUNT, 5MM(D) X 4(L) 26

SGISD5 NAVIGATOR CERTAIN STARTER DRILL, 5MM(D) 25

SGKIT NAVIGATOR SURGICAL KIT 25,26

SGLKIT NAVIGATOR LABORATORY KIT 27

SGLTRAY NAVIGATOR LABORATORY TRAY 27

SGQ-ER20H OSSEOCISION®20:1 HANDPIECE 20

SGSD34 NAVIGATOR STARTER DRILL, 3/4MM(D) 25

SGSD4 NAVIGATOR STARTER DRILL, 4.1MM(D) 25

SGSD45 NAVIGATOR STARTER DRILL, 4/5MM(D) 25

SGT25 STENT GUIDE TUBE (25-PACK) 40

SGTAP4 NAVIGATOR BONE TAP, 4.1MM(D) 26

SGTAP45 NAVIGATOR BONE TAP, 4/5MM(D) 26

SGTAP5 NAVIGATOR BONE TAP, 5MM(D) 26

SGTCD4L TAPERED NAVIGATOR COUNTERSINK DRILL, 4.1MM(D) - LONG 21

SGTCD4S TAPERED NAVIGATOR COUNTERSINK DRILL, 4.1MM(D) - SHORT 21

SGTCD5L TAPERED NAVIGATOR COUNTERSINK DRILL, 5MM(D) - LONG 21

SGTCD5S TAPERED NAVIGATOR COUNTERSINK DRILL, 5MM(D) - SHORT 21

SGTCP4L TAPERED NAVIGATOR CORTICAL PERFORATOR, 4.1MM(D) - LONG 21

SGTCP4S TAPERED NAVIGATOR CORTICAL PERFORATOR, 4.1MM(D) - SHORT 21

SGTCP5L TAPERED NAVIGATOR CORTICAL PERFORATOR, 5MM(D) - LONG 21

SGTCP5S TAPERED NAVIGATOR CORTICAL PERFORATOR, 5MM(D) - SHORT 21

SGTD19A TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X A(L) 21

SGTD19B TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X B(L) 21

SGTD19C TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X C(L) 21

SGTD19D TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X D(L) 21

SGTD19E TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X E(L) 21

SGTD19F TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X F(L) 21

SGTD19G TAPERED NAVIGATOR TWIST DRILL, 1.9MM(D) X G(L) 21

SGTD410L TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 10MM(L) - LONG 22

SGTD410S TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 10MM(L) - SHORT 21

Index

Item# Description Page#

SGTD411L TAPERED NAVIGATOR®SHAPING DRILL, 4.1MM(D) X 11.5MM(L) - LONG 22

SGTD411S TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 11.5MM(L) - SHORT

SGTD413L TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 13MM(L) - LONG 22

SGTD413S TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 13MM(L) - SHORT 21

SGTD415L TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 15MM(L) - LONG 22

SGTD415S TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 15MM(L) - SHORT 21

SGTD485L TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 8.5MM(L) - LONG 22

SGTD485S TAPERED NAVIGATOR SHAPING DRILL, 4.1MM(D) X 8.5MM(L) - SHORT 21

SGTD510L TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 10MM(L) - LONG 22

SGTD510S TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 10MM(L) - SHORT 22

SGTD511L TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 11.5MM(L) - LONG 22

SGTD511S TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 11.5MM(L) - SHORT 22

SGTD513L TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 13MM(L) - LONG 22

SGTD513S TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 13MM(L) - SHORT 22

SGTD515L TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 15MM(L) - LONG 22

SGTD515S TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 15MM(L) - SHORT 22

SGTD585L TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 8.5MM(L) - LONG 22

SGTD585S TAPERED NAVIGATOR SHAPING DRILL, 5MM(D) X 8.5MM(L) - SHORT 21

SGTDPHR TAPERED NAVIGATOR REDUCTION DRILL POSITIONING HANDLE 22

SGTDPHT TAPERED NAVIGATOR TWIST DRILL POSITIONING HANDLE 22

SGTLTRAY TAPERED NAVIGATOR LABORATORY TRAY 24

SGTP4 NAVIGATOR TISSUE PUNCH, 4.1MM(D) 25

SGTP5 NAVIGATOR TISSUE PUNCH, 5MM(D) 25

SGTRAY NAVIGATOR SURGICAL TRAY 25

SGTT410L TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 10(L) - LONG 23

SGTT410S TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 10(L) - SHORT 23

SGTT411L TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 11.5(L) - LONG 23

SGTT411S TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 11.5(L) - SHORT 23

SGTT413L TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 13(L) - LONG 23

SGTT413S TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 13(L) - SHORT 23

SGTT415L TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 15(L) - LONG 23

SGTT415S TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 15(L) - SHORT 23

SGTT485L TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 8.5(L) - LONG 23

SGTT485S TAPERED NAVIGATOR BONE TAP, 4.1MM(D) X 8.5(L) - SHORT 23

SGTT510L TAPERED NAVIGATOR BONE TAP, 5MM(D) X 10(L) - LONG 23

SGTT510S TAPERED NAVIGATOR BONE TAP, 5MM(D) X 10(L) - SHORT 23

SGTT511L TAPERED NAVIGATOR BONE TAP, 5MM(D) X 11.5(L) - LONG 23

SGTT511S TAPERED NAVIGATOR BONE TAP, 5MM(D) X 11.5(L) - SHORT 23

SGTT513L TAPERED NAVIGATOR BONE TAP, 5MM(D) X 13(L) - LONG 23

SGTT513S TAPERED NAVIGATOR BONE TAP, 5MM(D) X 13(L) - SHORT 23

SGTT515L TAPERED NAVIGATOR BONE TAP, 5MM(D) X 15(L) - LONG 23

SGTT515S TAPERED NAVIGATOR BONE TAP, 5MM(D) X 15(L) - SHORT 23

SGTT585L TAPERED NAVIGATOR BONE TAP, 5MM(D) X 8.5(L) - LONG 23

SGTT585S TAPERED NAVIGATOR BONE TAP, 5MM(D) X 8.5(L) - SHORT 23

SGTTAPT TAPERED NAVIGATOR BONE TAP TRAY 23

SGTTP4 TAPERED NAVIGATOR TISSUE PUNCH, 4.1MM(D) 21

SGTTP5 TAPERED NAVIGATOR TISSUE PUNCH, 5MM(D) 21

SGTTRAY TAPERED NAVIGATOR SURGICAL TRAY 21

SLIMKT SURGICAL SLIM KIT FOR TAPERED CERTAIN®IMPLANTS 28,29,30

SLIMKTE SURGICAL SLIM KIT FOR CERTAIN & EXTERNAL HEX IMPLANTS 28,29,30

TAP10 BONE TAP, 3.75MM(D) X 7-10MM(L) 37

TAP13 BONE TAP, 3.75MM(D) X 7-13MM(L) 37

TAP20 BONE TAP, 3.75MM(D) X 7-20MM(L) 37

TAP410 BONE TAP, 4MM(D) X 7-10MM(L) 37

TAP413 BONE TAP, 4MM(D) X 7-13MM(L) 32,33,37

TAP420 BONE TAP, 4MM(D) X 7-20MM(L) 37

TAP518S BONE TAP, 5MM(D) X 7-18MM(L) 37

TAP53S BONE TAP, 5MM(D) X 7-13MM(L) 32,33,37

TAP58S BONE TAP, 5MM(D) X 7-8.5MM(L) 37

TAP618S BONE TAP, 6MM(D) X 7-18MM(L) 37

TAP63S BONE TAP, 6MM(D) X 7-13MM(L) 32,33,37

TAP68S BONE TAP, 6MM(D) X 7-8.5MM(L) 37

TE003 TITANIUM ELEVATOR 39

TF002 TITANIUM FORCEPS 39

THA42 EP®1-PIECE HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 2MM(H) 16

THA43 EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 3MM(H) 16

THA44 EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 4MM(H) 16

THA46 EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 6MM(H) 16

THA48 EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 4.1MM(P) X 8MM(H) 16

THA52 EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 2MM(H) 16

THA53 EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 3MM(H) 16

THA54 EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 4MM(H) 16

THA56 EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 6MM(H) 16

THA58 EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 5MM(P) X 8MM(H) 16

THA63 EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 3MM(H) 16

THA64 EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 4MM(H) 16

THA66 EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 6MM(H) 16

THA68 EP 1-PIECE HEALING ABUTMENT, 4.1MM(D) X 6MM(P) X 8MM(H) 16

THRC4 TEMPORARY HEALING RETENTION CYLINDER, 4.1MM(D) X 4MM(H) 16

THRC6 TEMPORARY HEALING RETENTION CYLINDER, 4.1MM(D) X 6MM(H) 16

TIBC1 TITANIUM NITRIDE COATED BONE CARRIER FOR SEKT1 42

TIPL1 LARGE TITANIUM PLUGGER 42

TIPS1 SMALL TITANIUM PLUGGER 42

TMP80 TISSUE MEASURING POST 39

TP001 TISSUE PUNCH, 4.1MM(D) 40

TP005 TISSUE PUNCH, 5MM(D) 40

TP006 TISSUE PUNCH, 6MM(D) 40

TRE02 TREPHINE BUR - 2MM INSIDE DIAMETER/3MM OUTSIDE DIAMETER 42

TRE04 TREPHINE BUR - 4MM INSIDE DIAMETER/5MM OUTSIDE DIAMETER 42

TRE05 TREPHINE BUR - 5MM INSIDE DIAMETER/6MM OUTSIDE DIAMETER 42

TRE06 TREPHINE BUR - 6MM INSIDE DIAMETER/7MM OUTSIDE DIAMETER 42

TRE08 TREPHINE BUR - 8MM INSIDE DIAMETER/9.3MM OUTSIDE DIAMETER 42

TST01 TITANIUM SUCTION TIP 39

U198-013 OSSEOCISION®ELECTRICAL POWER CORD, 230V (AUSTRALIA) 20

U260-414 OSSEOCISION ELECTRICAL POWER CORD, 230V (EUROPE) 20

U195-152 OSSEOCISION FUSES (100V/120V) 20

U197-152 OSSEOCISION FUSES (230V) 20

U370-152 OSSEOCISION COOLANT SOLUTION HANGER POST 20

U370-003 OSSEOCISION CONTROL UNIT, 100V 20

U371-003 OSSEOCISION CONTROL UNIT, 120V 20

U372-003 OSSEOCISION CONTROL UNIT, 230V 20

U389-013 OSSEOCISION ELECTRICAL POWER CORD, 100V 20

WR150 RATCHET WRENCH 22,26,29,32,34

WTH52 EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 5MM(P) X 2MM(H) 16

WTH53 EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 5MM(P) X 3MM(H) 16

WTH54 EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 5MM(P) X 4MM(H) 16

WTH56 EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 5MM(P) X 6MM(H) 16

WTH562 EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 6MM(P) X 2MM(H) 16

WTH563 EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 6MM(P) X 3MM(H) 16

WTH564 EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 6MM(P) X 4MM(H) 16

WTH566 EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 6MM(P) X 6MM(H) 16

WTH568 EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 6MM(P) X 8MM(H) 16

WTH58 EP 1-PIECE HEALING ABUTMENT, 5MM(D) X 5MM(P) X 8MM(H) 16

WTH62 EP 1-PIECE HEALING ABUTMENT, 6MM(D) X 6MM(P) X 2MM(H) 16

Index

Item# Description Page# Item# Description Page#

WTH63 EP®1-PIECE HEALING ABUTMENT, 6MM(D) X 6MM(P) X 3MM(H) 16

WTH64 EP 1-PIECE HEALING ABUTMENT, 6MM(D) X 6MM(P) X 4MM(H) 16

WTH66 EP 1-PIECE HEALING ABUTMENT, 6MM(D) X 6MM(P) X 6MM(H) 16

WTH68 EP 1-PIECE HEALING ABUTMENT, 6MM(D) X 6MM(P) X 8MM(H) 16

XDG00 GELB X-RAY DEPTH GAUGE KIT 40

XDG01 GELB X-RAY DEPTH GAUGE KIT, 2.3MM(D) 40

XDG13 GELB X-RAY DEPTH GAUGE, 2MM(D) X 13MM(L) 40

XDG20 GELB X-RAY DEPTH GAUGE, 2MM(D) X 20MM(L) 40

XDG2313 GELB X-RAY DEPTH GAUGE, 2.3MM(D) X 13MM(L) 40

XDG2320 GELB X-RAY DEPTH GAUGE, 2.3MM(D) X 20MM(L) 40

XFOS310 OSSEOTITE®2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 10MM(L) 9

XFOS311 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 11.5MM(L) 9

XFOS313 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 13MM(L) 9

XFOS315 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 15MM(L) 9

XFOS365 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 6.5MM(L) 9

XFOS385 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.75MM(D) X 8.5MM(L) 9

XFOS410 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 4MM(D) X 10MM(L) 9

XFOS411 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 4MM(D) X 11.5MM(L) 9

XFOS413 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 4MM(D) X 13MM(L) 9

XFOS415 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 4MM(D) X 15MM(L) 9

XFOS465 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 4MM(D) X 6.5MM(L) 9

XFOS485 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 4MM(D) X 8.5MM(L) 9

XFOS510 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 5MM(D) X 10MM(L) 9

XFOS511 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 5MM(D) X 11.5MM(L) 9

XFOS513 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 5MM(D) X 13MM(L) 9

XFOS515 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 5MM(D) X 15MM(L) 9

XFOS565 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 5MM(D) X 6.5MM(L) 9

XFOS585 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 5MM(D) X 8.5MM(L) 9

XFOS610 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 6MM(D) X 10MM(L) 9

XFOS611 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 6MM(D) X 11.5MM(L) 9

XFOS613 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 6MM(D) X 13MM(L) 9

XFOS615 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 6MM(D) X 15MM(L) 9

XFOS665 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 6MM(D) X 6.5MM(L) 9

XFOS685 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 6MM(D) X 8.5MM(L) 9

XFOSM310 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.25MM(D) X 10MM(L) 9

XFOSM311 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.25MM(D) X 11.5MM(L) 9

XFOSM313 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.25MM(D) X 13MM(L) 9

XFOSM315 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.25MM(D) X 15MM(L) 9

XFOSM365 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.25MM(D) X 6.5MM(L) 9

XFOSM385 OSSEOTITE 2 PARALLEL WALLED IMPLANT, 3.25MM(D) X 8.5MM(L) 9

XIFOSM310 OSSEOTITE 2 PARALLEL WALLED CERTAIN®IMPLANT, 6

3.25MM(D) X 10MM(L)

XIFOSM311 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

3.25MM(D) X 11.5MM(L)

XIFOSM313 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

3.25MM(D) X 13MM(L)

XIFOSM315 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

3.25MM(D) X 15MM(L)

XIFOSM385 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

3.25MM(D) X 8.5MM(L)

XIFOSS410 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

4MM(D) X 10MM(L)

XIFOSS411 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

4MM(D) X 11.5MM(L)

XIFOSS413 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

4MM(D) X 13MM(L)

XIFOSS415 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

4MM(D) X 15MM(L)

XIFOSS485 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

4MM(D) X 8.5MM(L)

XIFOSS510 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

5MM(D) X 10MM(L)

XIFOSS511 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

5MM(D) X 11.5MM(L)

XIFOSS513 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

5MM(D) X 13MM(L)

XIFOSS515 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

5MM(D) X 15MM(L)

XIFOSS585 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

5MM(D) X 8.5MM(L)

XIFOSS610 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

6MM(D) X 10MM(L)

XIFOSS611 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

6MM(D) X 11.5MM(L)

XIFOSS613 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

6MM(D) X 13MM(L)

XIFOSS615 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

6MM(D) X 15MM(L)

XIFOSS685 OSSEOTITE 2 PARALLEL WALLED CERTAIN IMPLANT, 6

6MM(D) X 8.5MM(L)

XIIOS4310 OSSEOTITE 2 CERTAIN PREVAIL®IMPLANT, 4

4MM(D) X 3.4MM(P) X 10MM(L)

XIIOS4311 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 4

4MM(D) X 3.4MM(P) X 11.5MM(L)

XIIOS4313 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 4

4MM(D) X 3.4MM(P) X 13MM(L)

XIIOS4315 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 4

4MM(D) X 3.4MM(P) X 15MM(L)

XIIOS4385 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 4

4MM(D) X 3.4MM(P) X 8.5MM(L)

XIIOS5410 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 4

5MM(D) X 4.1MM(P) X 10MM(L)

XIIOS5411 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 4

5MM(D) X 4.1MM(P) X 11.5MM(L)

XIIOS5413 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 4

5MM(D) X 4.1MM(P) X 13MM(L)

XIIOS5415 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 4

5MM(D) X 4.1MM(P) X 15MM(L)

XIIOS5485 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 4

5MM(D) X 4.1MM(P) X 8.5MM(L)

XIIOS6510 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 4

6MM(D) X 5MM(P) X 10MM(L)

XIIOS6511 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 4

6MM(D) X 5MM(P) X 11.5MM(L)

XIIOS6513 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 4

6MM(D) X 5MM(P) X 13MM(L)

XIIOS6515 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 4

6MM(D) X 5MM(P) X 15MM(L)

XIIOS6585 OSSEOTITE 2 CERTAIN PREVAIL IMPLANT, 4

6MM(D) X 5MM(P) X 8.5MM(L)

XTAP518S OSSEOTITE 2 DENSE BONE TAP 5MM(D) X 7-18MM(L) 37

XTAP53S OSSEOTITE 2 DENSE BONE TAP 5MM(D) X 7-13MM(L) 32,33,37

XTAP58S OSSEOTITE 2 DENSE BONE TAP 5MM(D) X 7-8.5MM(L) 37

XTAP618S OSSEOTITE 2 DENSE BONE TAP 6MM(D) X 7-18MM(L) 37

XTAP63S OSSEOTITE 2 DENSE BONE TAP 6MM(D) X 7-13MM(L) 32,33,37

XTAP68S OSSEOTITE 2 DENSE BONE TAP 6MM(D) X 7-8.5MM(L) 37

Y900-083 OSSEOCISION®IRRIGATION TUBE HOLDER 20

Y900-114 OSSEOCISION IRRIGATION TUBES, DISPOSABLE (10-PACK) 20

Z095-102 OSSEOCISION MOTOR CRADLE 20

Z103-101 OSSEOCISION HANDPIECE WRENCH 20

Z114-090 OSSEOCISION SPRAY LUBRICANT NOZZLE 20

Z144-095 OSSEOCISION NOZZLE CLEANING FINE WIRE 20

Z272-004 OSSEOCISION FOOT CONTROL (3.5M) 20

Index

Customer Account# Date: ____/____/____

___________________________

Representative taking order

Bill To:____________________________________________

____

______________________________________________________

Phone #: ( )______________________________________

Ship To:______________________________________________

______________________________________________________

Phone #: ( )______________________________________

Would you like to receive information via email about

BIOMET 3i Products, Services and Events?

nYes nNo

Email Address: __________________________________

Special Instructions:

Contact Name:

Customer P.O. #:_______________________________________

Method of Shipment: _____FedEx _____UPS

_____Next Day by 8:30am

_____Next Day by 10:30am

_____Next Day - Afternoon

_____Two Day

_____Ground

_____Other_____________

Method of Payment:

nCredit Card: _____Visa _____MasterCard _____AMEX

Card #:____________________________________________

Expiration Date:_____________________________________

n C.O.D.

n Bill - Net 30

Product No. Quantity Description Discount Unit Price Total

Date: Order Number: Order Total: Customer Service Representative:

Thank you for your patronage!

BIOMET 3i

4555 Riverside Drive

Palm Beach Gardens, FL 33410

Phone: 800-342-5454 • Fax: 561-776-1272

Website: www.biomet3i.com

Customer Name: Specialty:

Ordering Form

Ordering Information

Some products may not be available outside the U.S.A.

Algunos productos no se comercializan fuera de EE.UU.

Certains produits ne sont pas disponibles en dehors des États-Unis.

Einige Produkte sind außerhalb der USA nicht erhältlich.

To Place an Order:

Contact your local BIOMET 3i Representative or call:

BIOMET 3i Customer Service

Monday–Thursday 8am–8pm (EST)

Friday 8am–6:30pm (EST)

800-342-5454, Fax 561-776-1272

In Canada: 800-363-1980, Outside US: 561-776-6700

TERMS AND CONDITIONS OF SALE. The following are the terms and

conditions by which BIOMET 3i sells its products.

GOVERNING TERMS. Any shipment of products shall be deemed to be on

the terms and conditions stated herein. Any and all terms and conditions

submitted by Purchaser are hereby rejected.

TAXES. The prices set forth herein do not include any sales, use, excise,

ad valorem, property or other taxes applicable to the sale, use or delivery

of the products, all of which shall be paid by Purchaser separately or

added to the contract price and paid by Purchaser to BIOMET 3i.

PRICES. The prices set forth for the products are in United States Dollars.

DELIVERY. Products sold hereunder shall be delivered by BIOMET 3i,

F.O.B. Palm Beach Gardens, Florida.

PAYMENT. Payment terms shall be as set forth under the Terms section

on front of the invoice.

WARRANTY. BIOMET 3i nor any of its affiliates make any warranty,

express or implied, except that its products shall be free from defects in

material and/or workmanship. This warranty applies only to the original

Purchaser. In the event of a product defect, immediately notify BIOMET 3i

of the defect prior to returning the product. Devices shall be sterilized

prior to return. As its sole obligation and as Purchaser’s sole remedy

under this warranty, BIOMET 3i will, at its option, either repair, replace or

issue credit for such products. Purchaser assumes all risks and liability

resulting from the use of these products, whether used separately or in

combination with other products.

Except for the warranty expressly described in the warranty paragraph

above, neither BIOMET 3i nor any of its affiliates makes any other

warranty with respect to the BIOMET 3i Products, expressed or implied,

written or oral, including, without limitation, any implied warranty of

merchantability, or a warranty of fitness for a particular purpose.

EDUCATION; MODIFICATION OF PRODUCTS. BIOMET 3i reserves the

right to modify products, discontinue products and change specifications

of products.

RETURN POLICY. A Purchaser may return any BIOMET 3i Product within

90 days of the invoice date. BIOMET 3i Products returned within 60 days

of the invoice date will be accepted without any re-stocking fee to the

Purchaser. BIOMET 3i Products returned between 61 and 90 days of the

invoice date will be subject to a 15% restocking fee. A BIOMET 3i Product

will be accepted for return only if the BIOMET 3i Product is (1) returned in

its original, unopened package (including autoclavable products); (2)

received by BIOMET 3i within 90 days after the invoice date for that

product; and (3) returned freight prepaid to 4555 Riverside Drive, Palm

Beach Gardens, Florida 33410, (Attention: Returns Department)

accompanied by the BIOMET 3i Return Authorization Number provided by

the BIOMET 3i Customer Service Department. Purchaser should be

advised that BIOMET 3i Products not meeting the above criteria will not

be accepted for return.

EXCHANGE POLICY. BIOMET 3i Products may be exchanged within 180

days of the invoice date, without a re-stocking fee, for other BIOMET 3i

Products of equal or lesser value within the same product family as

determined by BIOMET 3i (ex. implant for implant, abutment

for abutment, membrane for membrane). BIOMET 3i Products may be

exchanged within 180 days of the invoice date for other BIOMET 3i

Products of greater value within the same product family as determined

by BIOMET 3i (ex. implant for implant, abutment for abutment, membrane

for membrane), with the price differential paid by the Purchaser. In both

cases, the exchanged BIOMET 3i Product must be (1) returned in its

original, unopened package (including autoclavable products); (2) a

currently offered BIOMET 3i Product (discontinued product not included);

and (3) returned freight prepaid to 4555 Riverside Drive, Palm Beach

Gardens, Florida 33410, (Attention: Returns Department) and

accompanied by the BIOMET 3i Products Return Authorization Number

provided by the BIOMET 3i Customer Service Department.

AVAILABILITY OF PRODUCTS. All products are not available in all areas.

Any offer or product void where prohibited by law.

EXPORT CONTROL. All products are subject to all applicable export

control and sanctions legislation.

FORCE MAJEURE. BIOMET 3i shall not be liable for any loss or damage

due to failure or delay arising out of any cause beyond the reasonable

control of BIOMET 3i. In the event of any failure or delay resulting from

such causes, an equitable adjustment of delivery and any other

appropriate terms and conditions shall be made. No such failure or delay

shall be the basis for an increase of obligation by BIOMET 3i nor any

termination by the Purchaser.

LIMITATION OF LIABILITY. Under no circumstances shall BIOMET 3i nor

any of its affiliates be liable for business interruption, loss of profits,

special, indirect, incidental or consequential damages of any nature and

from any cause whether based in contract, warranty or tort (including

negligence) or other legal theory, even if BIOMET 3i has been advised of

the possibility of such damages.

VALIDITY. If any provision of these Terms and Conditions is found to be

illegal or unenforceable in any respect, such illegality or unenforcibility

shall not affect any other provision of these Terms and Conditions, all of

which shall remain enforceable in accordance with their terms.

GENERAL PROVISIONS. The purchase of the products and these Terms

and Conditions are governed by the laws of Florida without regard to

conflicts of law principles. This document incorporates all oral and written

representations between the parties and constitutes the entire agreement

and understanding of the parties with respect to the subject matter hereof

and supercedes any and all other agreements either oral or written

between the parties with respect to such subject matter. No amendment or

modification may be made to this document unless made in writing and

duly executed by an authorized representative of BIOMET 3i.

CAUTION. Federal (U.S.) Law restricts these devices to sale by or on the

order of a licensed healthcare practitioner. Devices labeled STERILE are

certified to be sterile unless sterile package is opened or damaged.

EXPORT ORDERS. Require advance payment or letter of credit. Shipments

are made either by freight collect or paid by BIOMET 3i and added to the

invoice. Unless special instructions are received with an order, the

shipping method will be determined by BIOMET 3i, F.O.B. Palm Beach

Gardens, Florida.

DUNS #: 186127825

BIOMET 3i is listed in the SAM (U.S. System for Award Management)

Database.

3i T3, ACT, Advanced Cutting Technology, BellaTek, BellaTek design, Biogran, Bone Bonding, Certain, DCD, DIEM, Encode, Endobon, EP, GingiHue, Gold-

Tite, Navigator, OSSEOCISION, OsseoGuard, OsseoGuard Flex, OSSEOTITE, OSSEOTITE XP, PreFormance, PREVAIL, Provide, QuickSeat, RegenerOss and

ZiReal are registered trademarks of BIOMET 3i LLC. 3i T3 design, ICE, NanoTite, Providing Solutions – One Patient At A Time and Twist Lock are trademarks

of BIOMET 3i LLC. LOCATOR is a registered trademark of Zest Anchors, Inc. Safescraper is a registered trademark of CGM S.p.A Divisione Medicale META.

All trademarks herein are the property of BIOMET 3i LLC unless otherwise indicated. This material is intended for clinicians only and is NOT intended for patient

distribution. This material is not to be redistributed, duplicated or disclosed without the express written consent of BIOMET 3i. For additional product

information, including indications, contraindications, warnings, precautions and potential adverse effects, please visit the BIOMET 3i Website:

www.ifu.biomet3i.com.

Want More? Solutions Start Here

Check Out The BIOMET 3i Online Store at

www.shopbiomet3i.com

(US & Spain Customers Only)

For More Information, Please Contact Your Local BIOMET 3i Sales Representative

Join

Watch

Download

BIOMET 3i

4555 Riverside Drive

Palm Beach Gardens, FL 33410

1-800-342-5454

Outside The U.S.: +1-561-776-6700

Fax: +1-561-776-1272

www.biomet3i.com

www.shopbiomet3i.com

BIOMET 3i

Dental Iberica S.L.

WTC Almeda Park, Ed. 1, Planta 1ª

Pl. de la Pau, s/n

08940, Cornellà de Llobregat

(Barcelona) Spain

Phone: +34-93-470-55-00

Fax: +34-93-371-78-49

EC REP

INSTSUR

REV B 02/15

Surgical DU1000 And Site Preparation Product Catalog

Navigation menu

Versions of this User Manual:

Views

Navigation