T5UID1 Application Guide
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 14
| Download | |
| Open PDF In Browser | View PDF |
Ver2.1 T5UID1 Development Guide 1 Overview T5UID1 is DGUS II software platform based on T5 CPU, it is design for low resolution UI application. Features: (1) Dual core T5 CPU, GUI core and OS core both run at 250MHz and power consumption is extremely low. (2) 128Mbytes NAND Flash, 64Mbytes for picture memory, which can store 250 pictures of 480*272 resolution (full screen). (3) Font memory is 64Mbytes, font file and audio file share the back half (32 Mbytes) of Font Space. (4) 256×2.048 seconds 32KHz 16bit WAV audio player. (5) 320Kbytes Nor Flash for user database. (6) 128Kbytes variables space. (7) Support upgrade of font, audio, icon and other software. (8) Support JPEG image decompression and upgrade. (9) 255 display variables per user interface at most. (10) Support standard T5 DWIN OS platform and hardware customization. Interface of 20 IO, 6 UART, several AD and PWM can be expanded on hardware. (11) 40mS DGUS operating cycle, user interface effect is extremely fluent. (12) Display variables can be turned on/off or modified to realize complicated display effect. (13) Touch controls can be turned on/off or modified to realize complicated touch effect. (14) Download files and configure hardware through SD card. The downloaded files will be counted and displayed for file check. The downloaded files can be encrypted. (15) Support adjustment of capacitive touch panel responsiveness, which make the thickness of front toughened glass is up to 6 mm. Beijing DWIN Technologies -1- www.dwin.com.cn 400 018 9008 dwinhmi@dwin.com.cn Ver2.1 T5UID1 Development Guide 2 Function List 2.1 Display Control No. Function code Function Data length Description (Word) Icon display is related with a variable. When variable changes, icon switches accordingly. This 1 0x00 Variable Icon 1 function is used for dashboard, progress bar, etc. Support superposition of background and transparency set. 3 icon status corresponding to a variable: no display, display selected icon, animation icon. 2 0x01 Animation Icon 2 This function is used for alarm, etc. Support superposition of background and transparency set. Support animation speed set. Slider icon is related with a variable. This function is used for display liquid level, dial, 3 0x02 Slider Icon 1 progress bar. Support superposition of background and transparency set. Use word art icon to display data. 4 0x03 Word Art 1/2/4 5 0x04 Image Animation none 6 0x05 Rotation Icon 1 7 0x06 Bit Variable Icon 3 8 0x10 Variable Data 1/2/4 9 0x11 Text 2K at most 10 0x12_00 Digital RTC none Display digital RTC in customized format. 11 0x12_01 Analog Clock none Display analog clock via rotation icon. Support superposition of background and transparency set Auto play an image sequence at selected speed. This function is used in welcome page or screensaver. Transform variable range to angle data which linear with variable. Then display icon at corresponding angle. This function is mainly used for dashboard. Every bit (0/1) of one variable data stands a status, and the status can be displayed via static icon or animation. This function is used to display on/off state. Display a variable in specified format (integer, decimal, unit, etc), font type, and font size. Display character string in specified format (font library) at selected area. Display variable data sequence in specified window, highlight the selected data. 12 0x15 Data Window 2 Combined this function with sliding adjustment or increment adjustment, data sequence can scroll with finger touch. The scrolling speed can be controlled via DWIN OS. The variable occupy 2 word space, (VP+1) space is reserved. 0x20 Dynamic Trend Curve 14 0x21_01 Draw_Dot Dot set（x, y, color） 15 0x21_02 Draw_Line Draw a line via dot connection (color, (x0, y0), …, (xn, yn) ) 16 0x21_03 Draw_Rectangle 17 0x21_04 Draw_ Fill Rectangle Area 18 0x21_05 Draw_Circle 19 0x21_06 Draw_Picture Copy&Paste 20 0x21_07 Draw_Icon Display 21 0x21_09 Draw_ Frequency Spectrum 22 0x21_0A Draw_Segment Connect line segments. Endpoint and color can be set. 23 0x21_0B Draw_Arc Display Display arc. Radius, color and angle range can be set. 24 0x21_0D Draw_XOR 25 0x24 Zone Scrolling 1 0x25 QR Code Display 259 at most 26 Beijing DWIN Technologies 2K per channel Display real-time curve via data from curve buffer (auto match). The display area, central axis 13 coordinates, display scale (zoom in/out), and curve direction of curve can be set. Draw a rectangle. Color/area/size can be set. Filling specified rectangle area with color. Color, area, size can be set. Display entire arc. Color, area, size can be set. User define Copy a picture area and display it on current page. Icon display. Icon library is optional. Display frequency spectrum (vertical line), line color and location can be set. Do XOR operation at selected rectangular area. Mainly used for highlight display. -2- Loop shift of specified area, move direction can be set. Used for simple dynamic effect of flow chart and progress bar. The variable is occupied by system, user operation is forbidden. Display QR code according to specified data. www.dwin.com.cn 400 018 9008 dwinhmi@dwin.com.cn Ver2.1 T5UID1 Development Guide 27 0x26 Adjust brightness of selected area 1 Adjust the brightness of rectangular area to highlight or weaken background. Remarks: 1. For more detailed function instruction, please refer to Development Guide of DWIN DGUS. 2. VP is a pointer, which points to the storage location of user variable memory space. 3. User can set SP (stack pointer) in DGUS tool, thus the configuration of display control will be write in to user variable memory space that the SP pointing to. User can operate configuration of display control via UART or DWIN OS to combine multi-controls. Beijing DWIN Technologies -3- www.dwin.com.cn 400 018 9008 dwinhmi@dwin.com.cn Ver2.1 T5UID1 Development Guide 2.2 Touch Control No. Function Code Function Data Length Description (Word) Input integer, fixed-point decimal via touch panel. The inputted data will be saved to variable 01 00 Variable Data Input 1/2/4 space that user define. The transparency of popup keyboard can be set. Popup Window Touch to active a popup window, return menu item key code of the window. 02 01 03 02 04 03 Slide Adjustment 1 05 05 Return Key Value 1 06 06 Text Input 127 at most 07 08 Incremental Adjustment Return data based on touch status 1 The transparency of popup window can be set. Touch button to do add/minus with variables. The adjustment step and range can be set. 1 Set adjustment from 0 to 1 circularly, user can get the checkbox effect. Slide to adjust variable data. The adjustment range can be set. Return key code when touch the button on touch panel and write key code in variable space that VP point to. Support bit variable return. User define Input ASCII character or GBK Chinese character, support cursor and edit during input process. (VP-1) space is reserved to save input status and inputted data length. Return data to space that VP pointing to, the rule between data and touch status is set forward. Combining data auto-uploading function, the data can be returned to UART. Adjust variable data based on slide range on X axis or Y axis within selected area. 08 0A Slide Adjust (gesture) 2 Combining data window to realize rolling adjustment. VP space is reserved, the data is saved in space that (VP+1) pointing to. 09 0B Page Sliding (gesture) None Scrolling touch screen along X-axis to realize page scrolling. The next page and scrolling area can be set. Display control will move along gesture. Remarks: 1. Refer to DWIN DGUS Development Guide for detailed description. 2. Touch configuration file(13*.BIN) can not be more than 32Kbytes. 3. The touch control interface is 0x00B0, user can operate touch control via UART or DWIN OS to nest or group functions. Beijing DWIN Technologies -4- www.dwin.com.cn 400 018 9008 dwinhmi@dwin.com.cn Ver2.1 T5UID1 Development Guide 2.3 Serial Port Communication Protocol UART 2 can be used for system debug, whose mode is fixed at 8N1. Baud rate can be set, data frame is consist of 5 parts. Data Block 1 2 3 4 Definition Frame Header Data length Instruction Data CRC (optional) Data Length 2 1 1 N 2 Description 0x5AA5 Command+data+CRC 0x80/0x81/0x82/0x83 Example (without CRC) 5A A5 04 83 00 10 04 Example (with CRC) 5A A5 06 83 00 10 04 25 A3 CRC checker can be turn on/off at 0x2C.6 in T5UID1.CFG. Description of UART2 instruction: Instruction Data Description Send: Write data string into register. Register Page (0x00-0x08) + Register Address(0x00-0xFF) + Data to write 0x80 Answer: Answer of write instruction. 0x4F 0xaB Send: Register Page(0x00-0x08) + Register Address (0x00-0xFF) + Data Length to Read data from register. Read (0x01-0xFB) 0x81 Answer: Register Page (0x00-0x08) + Register Address (0x00-0xFF) + Data Length + Answer of read instruction. Data 0x82 Send: Write data in to SRAM. Do not write data Start Address of SRAM (0x0000-0xFFFF) + Data to Write into space reserved for system. Answer: Answer of write instruction. 0x4F 0xaB Send: Start Address of SRAM (0x0000-0xFFFF) + Data Length to Read (0x01-0x7D) 0x83 Answer: Read data form SRAM. Answer of read instruction. Start Address of SRAM + Data Length (word) + Data Definition of Register page: Register page ID Definition 0x00-0x07 Data Register 0x08 Port Register Beijing DWIN Technologies Description 256 per group, R0-R255 DR0-DR255 See 3.4 section of DWIN OS development guide based on T5 for more. -5- www.dwin.com.cn 400 018 9008 dwinhmi@dwin.com.cn Ver2.1 T5UID1 Development Guide 3 System Variable Interface Data with same background color in table need to be update at the same time. Length VP Definition Description 0x00 Device_ID 4 T5 CPU ID, each T5 CPU has an unique ID. 0x04 System_Reset 2 0x55AA 5AA5=Reset T5; 0x55AA 5A5A=Reset system (including /RST_OUT pin output). (Word) D3: write 0x5A to enable DWIN OS once (write into 1MB Nor Flash), clear after operation. 0x06 OS_Update_CMD 2 D2: Fixed at 0x10. DWIN OS program must start from 0x1000. D1:0: Start address of SRAM to save program to update, it must be even. D7: Mode. 0x5A=read 0xA5=write, clear after operation. 0x08 NOR_FLASH_RW _CMD 4 D6:4: Start address of Nor Flash. Must be even. 0x000000-0x02:7FFE, 160KWords. D3:2: Start address of SRAM. Must be even. D1:0: Data length to read/write. Must be even. (Unit: word) 0x0C Reserved 3 0x0F Ver 1 Application software version. D1 stands for GUI version, D0 stands for DWIN OS version. D7=Year (0-0x63) D6=month(0-0x0C), D5=day(0-0x1F), D4=week(0-0x6), D3=hour(0-0x17), 0x10 RTC 4 D2=minute(0-0x3B), D1=second(0-0x3B), D0 undefined. Data format is HEX. If there is no RTC on hardware, user can write RTC data. 0x14 PIC_Now 1 Display current page ID 0x15 GUI_Status 1 GUI status feedback: 0x0000=free, 0x0001=processing 13.bin and 14.bin. 0x16 TP_Status 4 D7: 0x5A=touch screen data is updated, OS is clear. D6: Touch panel status. 0x00=release, 0x01=first press, 0x02=lift, 0x03=pressing D5:D4=X coordinate D3:D2=Y coordinate D1:D0=0x0000. 0x1A-0x2F Reserved 22 Undefined 0x30 VCC_Now 1 Current 3.3V Voltage AD value, Voltage=AD value*4800/65532 mV. 0x31 LED_Now 1 AD0-AD3 0x32 Instantaneous D1: 0x5A = VCC_Now, backlight brightness value, AD0-AD1 instant value has updated. D0: Current backlight brightness value, 0x00-0x64. Instantaneous value of AD0-AD3, 1 word per AD. Voltage=AD value*4800/65532 mV. 4 Hardware support is needed. value 0x36 0x37 AD compute update mark T_Core 1 1 D0=0x5A means temperature data and AD0-AD7 compute data is updated. Clear OS. Hardware support is needed. CPU core temperature, temperature=T_Core*240/929. Unit: 0.1°C (+/ 0.1°C). 16-bit AD compute value of AD0-AD7, reference voltage is 4800mA. 0x38 AD0-AD7 compute value 16 2 words for each AD channel, high word is average value (DC component), low word is root mean square value (AC component). Sample rate is 5 KSPS, compute based on 256 sample data. Decode data of IRDA interface, need IRDA hardware. D7: 0x5A=IRDA key code is updated, clear after OS read the data. 0x48 IRDA_Data 4 D6: Button mode, 0x01= first press, 0x02=long press D5:2: 4 bytes remoter decode data. D1:D0: Count remote single, 0x0000-0xFFFF (cycle). 0x4C-0x7B Reserved Beijing DWIN Technologies 46 Undefined. -6- www.dwin.com.cn 400 018 9008 dwinhmi@dwin.com.cn Ver2.1 T5UID1 Development Guide 0x7C Folder Name 4 8 ASCII characters at most, like DWIN_SET. Read only. D3: Undefined, write 0x00. D2: Touch panel sensitivity configuration, read only. D1: Touch panel mode configuration, read only. D0: Set system status. .7: Reserved, write 0. 0x80 System_Config 2 .6: Display control number. 0=64 control/page, 1=128 control/page, read only. .5: Loading 22.bin to initialize SRAM. 1=Load 0=Not load, read only. .4: SD port status. 1=On 0=Ban, read and write. .3: Touch tone control. 1=On 0=Off, read and write. .2: Standby backlight control. 1=On 0=Off, read and write. .1-.0: display direction 00=0° 01=90° 10=180° 11=270°, read and write. Set standby backlight. 0x82 LED_Config 2 D3= brightness when system running, 0x00-0x64; When backlight standby control is off, D3 can be used for brightness adjustment via instruction. D2= brightness when system standby, 0x00-0x64; D1:0=wait time /5mS. D3: 0x5A = enable page operation once, clear after CPU operation. D2: Mode. 0x84 PIC_Set 2 0x01=page switch (display the selected picture). 0x02=save page (save background of current page to picture memory). D1:D0: picture ID. D7= write 0x5A to enable PWM1 setting once, clear after operation. D6= division factor, 0x86 PWM1_Set 4 D5:D4= PWM1 accuracy, PWM1 carrier frequency =501.35MHz/(division factor*PWM1 accuracy). D3:D0 reserved. 0x8A PWM2_Set 4 Set PWM2. 0x8E PWM3_Set 4 Set PWM3 0x92 PWM1_Out 1 D1:D0=PWM1 output high level width, 0x0000-PWM1 accuracy. Need hardware support. 0x93 PWM2_Out 1 D1:D0=PWM2 output high level width, 0x0000-PWM2 accuracy. Need hardware support. 0x94 PWM3_Out 1 D1:D0=PWM3 output high level width, 0x0000-PWM3 accuracy. Need hardware support. 0x95 PWMV1_Out 1 0x96 PWMV2_Out 1 0x97-0x9B Reserved 5 0x9C RTC_Set 4 D1:D0=PWMV1 output ratio, 0x0000-0x3E8, output is synchronous with 50Hz pin input pulse. Need hardware support. D1:D0=PWMV2 output ratio, 0x0000-0x3E8, output is synchronous with 50Hz pin input pulse. Need hardware support. Undefined D7:D6= write 0x5AA5 to enable RTC setting once; D5:D0=year, month, day, hour, minute, second, all in HEX format. Need hardware support. Music player setting: D3: Starting section of music to play, 0x00-0xFF. D2: Section number, 0x01-0xFF. Clear after DGUS operation. Under buzzer mode, it is buzz 0xA0 Music_Play_Set 2 time, unit: 8 mS. D1: Volume, unit: 1/256. D0: Return the rest section numbers of music to play, 0x00-0xFF. D3:D2 both write 0x00 to stop music playing. Beijing DWIN Technologies -7- www.dwin.com.cn 400 018 9008 dwinhmi@dwin.com.cn Ver2.1 T5UID1 Development Guide D7: 0x5A = enable once writing data in SRAM to picture buffer. 0xA2 BMP_Download 4 D6:D5: Starting address of SRAM, must be even. D4:D3: Data length, unit: word. Must be even. D2:D1:D0: Picture buffer address, 0x000000-0x0257FF, 150Kwords. D7: 0x5A = enable JPEG picture/icon download operation once, clear after CPU operation. D6: download mode 0x01=Display JPEG picture on current page. (it will be covered when switch page). 0x02=Save JPEG picture to picture memory. (Operating backstage). D5:D4: starting address of SRAM to save JPEG file, must be even. 64Kbytes per JPEG file at 0xA6 JPEG_Download 4 most. D3:D0: 0x01 mode: D3:D2= top left corner coordinate of picture displayed on background. 0x02 mode: D3:D2= picture ID，0x0000-0x00F0. The resolution of JPEG picture must not exceed screen resolution, set coordinate as 0° display. (for 90° display, users need to rotate picture and coordinate in advance. ) D11: 0x5A= enable once read/write font library (64Mbytes) operation, clear after operation. D10: operation mode, 0x01= read font library, 0x02=update font library. When D10=0x01 D9: font ID, 0x40-0x7F, 256Kwords per font, 16Mbytes at most. D8:D6: starting address in font, unit: word. 0x00 00 00-0x01 FF FF. D5:D4: starting address of SRAM to write data, must be even. 0xAA Nand Flash_RW_CMD D3:D2: data length to read, unit: word. Must be even. 6 D1:D0: undefined，write 0x00. When D10=0x02 Update font file (font library, icon, audio), 32Kbytes once. D9:D8 address of 32Kbytes font file, 0x0000-0x07FF, refer to the entire 64Mbytes font memory. D7:D6: starting address of SRAM to save updating data, must be even. D5:D4: fixed 0x0001. D3:D0: undefined, write 0x00. 0xB0: 0x5AA5= enable accessing touch control interface once. Clear after CPU operation. 0xB1: Page ID of touch control. 0xB2: High byte: touch control ID (set in DGUS II development software), 0x00-0xFF; Low byte: touch control code, 0x00-0x7F. 0xB0 Touch Control interface 0xB3: Access mode 36 0xB4-0xD3: data to modify of mode 0x02, 0x03. Mode 0x0000: turn off this touch control. Mode 0x0001: turn on this touch control. Mode 0x0002: Read this touch control and write it to SRAM that 0xB4 pointing to. Mode 0x0003: update current touch control with data that 0xB4 pointing to, the format and data length must be the same. 0xD4: 0x5AA5=enable the operation once, clear after operation. 0xD4 Simulate touch panel operation 4 0xD5: press mode. 0x0001=press, 0x0002=release, 0x0003=keep pressing, 0x0004=touch (press+release) 0xD6: X coordinate of press position. Beijing DWIN Technologies -8- www.dwin.com.cn 400 018 9008 dwinhmi@dwin.com.cn Ver2.1 T5UID1 Development Guide 0xD7: Y coordinate of press position. After simulating mode 0x0001 and 0x0003, must simulate 0x0002. (x,y) coordinate of TP must be set as 0°, CPU will auto-rotate coordinate. 0xD8-0xFF Reserved 40 0x100-0x2FF Reserved 512 Undefined. 0x300-0x30F: feedback 8 channel of curve buffer (read only), 2 words per channel. High word: pointer of data (0x0000-0x07FF); Low word: data length of curve buffer (0x0000-0x0800). Write 0x0000 to hide curve. 0x310-0x311: enable writing curve buffer. D3:D2: 0x5AA5= enable writing curve buffer, clear after operation. D1: The number of data block, 0x01-0x08. 0x300-0x37F Dynamic curve interface D0: Undefined, write 0x00. 128 0x312-0x37F: The data block to send to curve buffer, 16bit unsigned number. Single data block defines as channel ID (0x00-0x07)+data word length(0x01-0x6E)+data. After adopting dynamic curve displaying, from 0x1000, setting data buffer for each curve,as per 2Kwords aisle. While dynamic curve display is enabled, data buffer is start from 0x1000, and 2Kwords every buffer. CHO buffer is 0x1000-0x17FF, CH1 buffer is 0x1800-0x1FFF, etc. Free buffer can be used for user variable area. User can also rewrite curve buffer data, then modify pointer and data length in 0x300-0x30F to make sure the curve display right. 0x380-0xFFF Reserved 3K Undefined 0x1000-0xFFFF SRAM is for user use. Beijing DWIN Technologies -9- www.dwin.com.cn 400 018 9008 dwinhmi@dwin.com.cn Ver2.1 T5UID1 Development Guide 4 SD Interface Download and update file via SD/SDHC interface is support. File Type Core Program DWIN OS program Name rule Description T5UID1*.BIN The GUI core program. T5OS_V*.BIN Common T5 OS platform core program. DWINOS*.BIN DWIN OS program, code must begin from 0x1000. Each ID points to 2KWords memory, ID range is 0-79. NOR Flash database ID+(Optional) file name.LIB The NOR Flash is inserted in T5 CPU, 160KWords. It can be used f save user data or DWIN OS program. Font Library ID+(Optional)file name.BIN/HZK/DZK Generate by font generator. DGUS Input File 12*.BIN Save at fixed 12# font space. DGUS touch File 13*.BIN Save at fixed 13# font space, 32Kbytes at most. DGUS variable File 14*.BIN Save at fixed 14-17# font space DGUS variable initialize file 22*.BIN Icon file ID+(optional)file name.ICO Generate by DGUS tool. Save in font space. Audio file ID+(optional)file name.WAV 32KHz 16bit WAV format. Save in audio space. BMP image file ID+(optional)file name .BMP 24bit true color format. Hardware Configuration File T5UID1*.CFG Save at fixed 22# font space, load data in 0x2000-0x1FFF address t initialize 0x1000-0xFFFF SRAM. 64Mbytes font memory, font memory block is 256KB. 32Mbytes audio memory, audio memory block 128KB. Audio memory covers last half font memory (128 blocks), each audio memory block covers half font memory block. All the file must be put into DWIN _SET folder, and the folder must be set in SD card root directory. SD card must be 4KB sectors, FAT32 format. When power up, DGUS check SD interface once, then check SD interface every 3 seconds. Beijing DWIN Technologies - 10 - www.dwin.com.cn 400 018 9008 dwinhmi@dwin.com.cn Ver2.1 T5UID1 Development Guide 5 Hardware Configuration File T5UID1.CFG is hardware configuration file for T5UID1 platform. T5UID1 is binary, it can be edit by UltraEdit. Type Address Length Definition Description Identification Code 0x00 4 0x54 0x35 0x44 0x31 Format Flash 0x04 2 Fixed content. Write 0x5AA5 to format NAND Flash. 0x06: write 0x5A to enable system clock calibration 0x07: write 0xA5 is UART calibration mode. During the System Clock Calibration 0x06 calibration process, set UART2 as 115200bps and 8N1 mode, 2 send more than 30 0x55 data packages every 30 mS. Write 0xAA is RTC calibration mode. Apply the RTC hardware to calibrate. It is already be calibrated before sale. .7: data auto-uploading. 0=On, 1=Off. .6: display control number. 0=64 control/page, 1=128 control/page. System Configuration 0x08 1 System_Config1 .5: initialize via 22.bin file. 1=On 0=Off (default value is 0x38) .4: SD interface status. 1=on 0=ban .3: touch tone. 1=on 0=off 1 .2: backlight system standby control. 1=on 0=off .1-.0: display direction 00=0° 01=90° 10=180° 11=270° Standby Backlight 0x09 2 UART2 Baud Rate 0x0B 1 LED_Set_En Baud rate set value=7833600/real Baud rate. 115200bps, set value=0x0044. Ser value is 0x03E7 at most. 0x5A=enable standby backlight. 0x0C=brightness when TP is used, 0x0D=brightness when TP is 0x0C 4 LED_Idle_Set not used. 0x0E:0F=waiting time, unit: 5mS. LCD Configuration Boot Setting 0x10 2 Display_Config_En 0x12 1 PCLK_PHS 0x13 1 PCLK_DIV 0x14 1 H_W 0x15 1 H_S 0x16 2 H_D 0x18 1 H_E 0x19 1 V_W 0x1A 1 V_S 0x1B 2 V_D 0x1D 1 V_E 0x1E 1 TCON_SEL 0x1F 1 Reserved 0x20 1 PIC_Power_On_En 0x21 2 PIC_Power_On 0x23 1 Music_Power_On_En 0x24 3 Music_Power_On Beijing DWIN Technologies - 11 - 0x5AA5=enable LCD configuration. Not for user. Data latch phase: 0x00=PCLK Falling edge, 0x01=PCLK Rising edge Pixels clock PCLK frequency set ， PCLK frequency (MHz)=500/PCLK_DIV. Horizontal resolution of LCD (X direction). Vertical resolution of LCD (Y direction). 0x00=do not configure TCON. 0x00. 0x5A= enable this configuration. ID of page to display when power on. 0x5A= enable this configuration. Strat-up music: www.dwin.com.cn 400 018 9008 dwinhmi@dwin.com.cn Ver2.1 T5UID1 Development Guide 0x24=music ID, 0x25=memory block number that music file cover, 0x26=volume. 0x25=0x00, no strat-up music. 0x27 1 TP_Set_En 0x5A= enable this configuration. Not for user. TP mode. .7-.4 (high 4bit), TP type: 0x0*=resistance touch panel. 0x1*=Capacitive touch panel (driver: GT911, GT9271, GT9110). Touchscreen setting 0x28 1 TP_Mode .3-.0 (low 4bit), TP mode: .3 reserved, wirte 0. .2 X axis data: 0=0 to Xmax, 1=Xmax to 0; .1 Y axis data: 0=0 to Ymax, 1=Ymax to 0; .0 X, Y exchange: 0=XY, 1=YX . Undefined 0x29 1 TP_Sense 0x2A 2 Reserved TP sensitivity: 0x00-0x1F, 0x00 is lowest, 0x1F is highest. Default value is 0x14. Write 0x00. .7: choose audio player/buzzer. 1=buzzer, 0=audio player. System 0x2C 1 Configuration2 .6: CRC checker for UART2. 1=on, 0=off. System_Config2 (default value is 0x00) .5: secondary hardware watch dog (WDT). 1=on, 0=off. .4: synchronous update of display content. 1=on, 0=off. .3-.0: reserved, write 0. SD download check 0x2D 3 Reserved Write 0x00 0x30 2 SD_Check_En 0x32 1 .LIB file 0x33 1 .BIN font file 0x00-0xFF, OS program is not include. 0x34 1 .DZK font file 0x00-0xFF 0x35 1 .HZK font file 0x00-0xFF 0x36 1 .ICO icon file 0x00-0xFF 0x37 1 .WAV file 0x00-0xFF 0x38 2 .BMP file 0x0000-0xFFFF 0x3A 6 Reserved 0x00 0x5AA5=enable download file check via SD interface. 0x00-0xFF 0x5AA5=enable SD encryption once. 0x40 2 0x5AAA=disable SD encryption. Folder name returns to SD_Encrypt_En DWIN_SET. The encrypted setting is saved in Flash, and will not be clear. SD encryption 0x42 1 Length of Folder name 0x01-0x08 8 ASCII characters at most (only 0-9, a-z, A-Z, and -, _ ). If 0x43 8 Folder name folder name include invalid characters, default DWIN_SET will be used. Undefined 0x4B 5 Reserved 0x50 32 Decode key 0x70 17 Reserved 0x00 0x00 Attention：part of green background must be configured. Beijing DWIN Technologies - 12 - www.dwin.com.cn 400 018 9008 dwinhmi@dwin.com.cn Ver2.1 T5UID1 Development Guide Display Configuration reference： Size_Resolution T5UID1.CFG display Configuration（HEX format） 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F 2.4_240*320 00 50 0A 14 00 F0 0A 02 02 01 40 02 05 00 2.8_240*320A 00 50 0A 14 00 F0 0A 02 02 01 40 02 03 00 2.8*240*320B 00 50 10 20 00 F0 20 02 0E 01 40 08 01 00 3.5_320*240 00 46 11 14 01 40 40 03 0F 00 F0 10 02 00 3.5_320*480 00 2C 0A 04 01 40 0A 02 02 01 E0 02 04 00 4.3*480*272 00 30 29 02 01 E0 02 0A 02 01 10 02 00 00 5.0*480*272 00 30 29 02 01 E0 02 0A 02 01 10 02 00 00 Beijing DWIN Technologies 13 www.dwin.com.cn 400 018 9008 dwinhmi@dwin.com.cn Ver2.1 T5UID1 Development Guide Revision Record Date Content Software Version 2017.06.13 Publishing at the first time. V1.0 2017.09.02 Add UART2 data auto-update by touch. V1.1 User need to edit T5UID1.CFG to 0x0008.7=1, touch control code is 0xFE**, and update T5 OS to V1.2 or above. 2017.09.23 Add real-time update of JPEG icon. V1.1 2017.10.13 Add ASCII input function. V1.2 2017.12.01 Add sensitivity modification of capacitive touch screen. Set at 0x27-0x29 in T5UID1.CFG V1.3 2017.12.18 Support 256 control/ page. V1.4 Support icon resolution over 255*255. Add drawing instruction. 2018.02.28 Add choose between audio player and buzzer. V1.5 ADD Chinese characters input (GBK code) via TP. Add dynamic curve display. 2018.03.10 Add sliding (gesture) page switch, and auto-upload page ID after switching. V1.6 Add touch control interface for on\off\read\edit. Add brightness adjustment of selected area, this function can be used to highlight or fade the area 2018.04.08 Add UART2 CRC checker. V2.0 Add SD interface download file count and check. Add modification of DWIN_SET folder name and encryption of entire program. Add background transparency set of all icon. Add icon animation speed adjustment. Add transparency set of popup area. Add touch simulation (0xD4) for process control and keyboard UI operation. 2018.05.10 Add secondary hardware watch dog (WDT) choice. V2.1 Add real-time update of display content. If there is any question when using this file or DWIN product, or willing to know more about DWIN product news, feel free to contact us: Service call: 400 018 9008 E-mail: dwinhmi@dwin.com.cn Beijing DWIN Technologies 14 www.dwin.com.cn 400 018 9008 dwinhmi@dwin.com.cn
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 14 Language : zh-CN Tagged PDF : Yes XMP Toolkit : 3.1-701 Producer : Microsoft® Word 2016 Creator : hp Creator Tool : Microsoft® Word 2016 Create Date : 2018:06:08 19:31:37+08:00 Modify Date : 2018:06:08 19:31:37+08:00 Document ID : uuid:71390379-0160-4633-B488-3CEAA91F9BF4 Instance ID : uuid:71390379-0160-4633-B488-3CEAA91F9BF4 Author : hpEXIF Metadata provided by EXIF.tools