EN_A2 582. TH 32A410
TH-32A410M to the manual 4875792b-28b1-406d-ad93-6c9f48a8bd43
User Manual: 582. TH-32A410 Panasonic Service Manuals - Panasonic Middle East
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Safety Precautions To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings and cautions below: Ŷ Mains plug and lead Model No. TH-32A400G TH-32A400K TH-32A400X TH-32A408K TH-32A409K TH-32A410G TH-32A410K TH-32A410M TH-32A410X Warning If you detect anything unusual, immediately remove the mains plug. ƔMains plug types vary between countries. Contents Setting Up the TV ····················· 3 Connecting the TV ···················· 4 Initial Setup ····························· 6 Operating the TV ······················ 6 Using the Media Player ············· 8 Using the Menu Functions ·········· 9 • Do not move the TV with the lead plugged into a socket Additional Information ············· 12 • Do not twist the lead, bend it excessively or stretch it. • Do not use a damaged mains plug or socket outlet. • Ensure the TV does not crush the mains lead. outlet. Troubleshooting ····················· 13 ƔDo not use any mains lead other than that provided with this TV. Specifications ························ 14 Maintenance ························· 15 English Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Some illustrations are presented as conceptual images and may be different from the actual products. Illustrations shown may be different between models and countries. CLU The illustrations for A410 series is used in this manual unless otherwise mentioned. Transport only in upright position TH-32A400_408_409_410KGMX_EN.indd 1 The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content. Panasonic has no authority to and does not grant you that permission and explicitly disclaims any right, ability or intention to obtain such permission on your behalf. It is your responsibility to ensure that your use of this or any other device complies with applicable copyright legislation in your country. Please refer to that legislation for more information on the relevant laws and regulations involved or contact the owner of the rights in the content you wish to record or playback. Panasonic and its affiliates make no representations or warranties of any kind with respect to the USB devices and the performance of communication between the USB devices and the USB port of Panasonic products, and expressly disclaims any and all warranties, whether express or implied or otherwise, including without limitation any implied warranty of fitness for a particular purpose, any loss of data, and any implied warranties arising from course of dealing or course of performance of data communication between the USB devices and the USB port of Panasonic products. 1/28/2014 10:45:08 AM Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Caution Allow sufficient space around the TV in order to help prevent excessive heat, which could lead to early failure of some electronic components. Warning ƔDo not remove covers and never modify the TV yourself as live parts are accessible when they are removed. There are no user serviceable parts inside. ƔDo not expose the TV to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV. ƔDo not insert foreign objects into the TV through the air vents. ƔDo not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic dealer to perform the setup or installation of approved wall-hanging brackets. ƔDo not apply strong force or impact to the display panel. TQB4GC1180 Minimum distance (cm) Please contact your local Panasonic dealer to purchase the recommended optional accessories. Rear of the TV (View from the side) a Depth of screw b 10 10 2 Remote Control ƔN2QAYB000823 (p. 4) 1 ƔA410M series ƔVentilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths and curtains. ƔWhether you are using a pedestal or not, always ensure the vents at the bottom of the TV are not blocked and there is sufficient space to enable adequate ventilation. 2 1/28/2014 10:45:08 AM Satellite dish Aerial and mains lead TV Aerial Set top box 1/28/2014 10:45:08 AM Operating the TV When you first turn on the TV, a series of steps will pop-up to guide you to setup your TV. ƔThese steps are not necessary if the setup has been completed by your local dealer. The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes. 1 2 3 4 5 6 outlet, then switch on the TV RF cable Ŷ Using HDMI terminal RF cable TV HDMI cable DVD Recorder / VCR Ŷ Using COMPONENT terminals Insert the mains plug firmly into place. Serial Number Equipment ƔYou can also make similar connection via HDMI 2. Alternative connection Model Number TV Equipment ƔWhen disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first. PLAYER INPUT MENU PICTURE 13 OFF TIMER INFO 14 15 16 EXIT 8 9 Select * * A410M/X only: AV1 IN Other models: AV IN TV Video cable Y VOL 12 20 CH 21 STILL 19 ASPECT ƔDisplays the [Aspect Selection] screen. Follow the operation guide to select the mode. [16:9] / [14:9] / [Just] / [4:3] / [4:3 Full] / [Zoom1] / [Zoom2] / [Zoom3] (p. 12) ƔYou can also press the button repeatedly to select the mode. 4 Auto Tuning starts ƔAuto Tuning searches and stores TV channels. The sorted channel order depends on the TV signal, the broadcasting system and reception conditions. 4 Selects picture mode [Viewing Mode] (p. 9) ƔPress repeatedly to select. Shop OK (p. 8) 3 Displays [Main Menu] (p. 9) 5 Displays Information banner 6 OK ƔConfirms selections. Ɣ Press after selecting channel positions to quickly change channel. Change Confirm 7 Displays [Option Menu] ƔShortcuts to some setting menus for picture, sound, etc. ƔFollow the operation guide to select / change the settings. Ɣ[Shop] is for shop display. If you selected [Shop], you can return to the above screen at the stage of Shop confirmation screen. Shop About operation guide When operating the TV with the remote control, follow the operation guide available at the bottom of the screen to perform the operation you want. 16:9 14:9 Just 2 MEDIA PLAYER RETURN You have selected shop mode 8 Coloured buttons ƔPerforms multiple operations which correspond to the operation guide displayed on the menu screen. Select EXIT Operation guide RETURN Referring to the operation guide: ƔTo select the mode 9 Volume Up / Down ƔTo change to the selected mode Connect the external equipment (p. 5), then select the input corresponds to the connected terminal. OK Example: ƔTo return to the previous menu RETURN Input Selection TV AV1 HDMI1 HDMI2 USB EXIT 11 Numeric buttons Ɣ Changes channel. ƔWhen in Standby mode, switches TV On. Amplifier with speaker system Note Ɣ[USB] : Switches to Media Player (p. 8) Ɣ You can label or skip each input mode (except [USB]). “Input Labels” (p. 11) Skipped inputs will not be displayed when the AV button is pressed. 12 Freezes / unfreezes picture 5 6 1/28/2014 10:45:09 AM Watching External Inputs OK ƔTo exit the menu 10 Sound Mute On / Off Setup is now complete and your TV is ready for viewing. Change TH-32A400_408_409_410KGMX_EN.indd 6 4 1 Displays [Input Selection] screen ƔOn first press, the [Input Selection] screen for control panel is displayed. Pressing the button again will toggle cursor movement. Displays [Main Menu] when press and hold for 3 seconds Confirms selection (OK button) while in the menu system 2 Channel Up / Down Cursor Up / Down ƔMakes selections or adjustments when in the menu system 3 Volume Up / Down Cursor Left / Right ƔMakes selections or adjustments when in the menu system 4 Switches TV On or Standby ƔTo completely turn Off the TV, remove the mains plug from the wall socket. 5 Remote control signal receiver 6 C.A.T.S. (Contrast Automatic Tracking System) sensor ƔSenses brightness to adjust picture quality when [Eco Mode] in the Picture Menu is set to [On]. (p. 10) 7 Power LED Ɣ Red: Standby Green: On Aspect Selection 1 Switches the TV On / Standby 3 5 67 Example: [Aspect Selection] ƔTo change the viewing environment later on, you need to initialise all settings by accessing [Shipping Condition] (p. 11). TV Indicators on the TV 20 Channel Up / Down Please select your viewing environment. Speaker system 2 18 Returns to the previous menu / page 19 LAST VIEW selecting [CATV/Other], press OK, and then select the Channel Plan from [Indian CATV], [South Africa], [American System], [American CATV] or [Japan]. Home 1 15 Changes multiplex sound mode (if available) Sound mode indicator: : STEREO : MAIN I : MONO : SUB II 18 B MUTE Using the TV controls 21 Returns to the last viewed channel Confirm USB port A410M/X only: AV1 IN* Other models: AV IN* HDMI 1 A410 series only: HDMI 2 AUDIO OUT A410M/X only: AV2 IN Aerial terminal 1/28/2014 10:45:08 AM Select OK 5 Select [Home] Audio cable G When Ŷ Using COMPOSITE terminals 3 4 5 6 7 14 OFF TIMER ƔPress repeatedly to select the period after which the TV will turn to Standby mode automatically. [0] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) 17 Cursor buttons ƔMakes selections or adjustments. 11 Asia/W.Europe CIS/E.Europe China Hong Kong NZ/Indonesia CATV/Other Audio cable 1 2 TH-32A400_408_409_410KGMX_EN.indd 4 16 Exits to the TV viewing screen 10 OK Channel Plan Equipment R ASPECT 3 Select your area * A410M/X only: AV1 IN Other models: AV IN Ɣ A410M/X only: You can also make similar connection via AV2 IN. TH-32A400_408_409_410KGMX_EN.indd 5 7 2 Select your language Component video cable F0114-0 Printed in Malaysia 3 17 RETURN Store * © Panasonic Corporation 2014 OPTION A400G/K, A408K, A409K, A410G/K series: AC 220 - 240 V, 50/60 Hz A400X, A410M/X series: AC Auto 110 - 240V, 50/60 Hz OSD Language English ƔKeep the space between the TV and RF cable to prevent distorted image. ƔDo not put the RF cable close to the mains lead to avoid noise. ƔDo not place the RF cable under the TV. ƔAn aerial, correct cable (75 ȍ coaxial) and correct terminating plug are required to obtain optimum quality picture and sound. ƔIf a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial socket and the TV. ƔYour local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial system for your particular area and the accessories required. ƔAny matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the responsibility of you, the customer. Ɣ If the aerial is placed in the wrong location, interference might happen. 1/28/2014 10:45:12 AM POWER MEDIA OK Mains lead (supplied) 4 13 Input mode selection ƔTV - switches to TV input mode ƔAV - displays [Input Selection] screen (p. 7) or press repeatedly to select the AV input mode Using the remote control 1 Plug the mains plug into the socket HDMI cable Customer’s Record Ŷ Screw specification Type: M4 Depth of screw: Minimum: 9 mm Maximum: 14 mm 4 TH-32A400_408_409_410KGMX_EN.indd 3 Initial Setup Set top box Connections * 3 TH-32A400_408_409_410KGMX_EN.indd 2 5 a: 200 mm b: 200 mm Warning ƔWhen optional accessories such as wall brackets etc. are used, always read and follow the manufactures installation and usage instructions. ƔDo not mount the unit directly below ceiling lights (such as spotlights or halogen lights) which typically give off high heat. Doing so may warp or damage plastic cabinet parts. ƔWhen installing wall brackets you must ensure the wall bracket is not electrically grounded to metal wall studs. Always ensure that there are no electrical cables, pipes etc. in the wall before you begin the wall bracket installation. ƔTo prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use. Batteries (R6) × 2 ƔOther series 2 Ŷ Holes for wall-hanging bracket installation Accessories may not be placed all together. Take care not to throw them away unintentionally. (p. 5) 1 Screw for fixing the TV onto the wall-hanging bracket (not supplied) 10 10 7 6 2 Attach the TV to the pedestal Standard accessories Audio cable TH-32A400_408_409_410KGMX_EN.indd 16 EN_A2.indd 1 Wall-hanging bracket (not supplied) Setting Up the TV Mains Lead Rear of the TV Optional accessories AV / Game equipment This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com. Web Site: http://panasonic.net 1 Assemble the pedestal Caution ƔIncorrect installation may cause battery leakage, corrosion and explosion. ƔReplace only with the same or equivalent type. ƔDo not mix old and new batteries. ƔDo not mix different battery types (such as alkaline and manganese batteries). ƔDo not use rechargeable batteries (Ni-Cd, etc.). ƔDo not burn or break up batteries. ƔDo not expose batteries to excessive heat such as sunshine, fire or the like. ƔMake sure you dispose of batteries correctly. Terminals Note the correct polarity (+ or -) Ŷ Ventilation Ŷ Take care Licence ································ 15 Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaim any liability or damage arising from operation and/or performance from usage of such other maker’s peripheral devices. Caution ƔDo not use any pedestal other than the one provided with this TV. ƔDo not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic dealer immediately. ƔDuring setup, make sure that all screws are securely tightened. ƔEnsure that the TV does not suffer any impact during installation of the pedestal. ƔEnsure that children do not climb onto the pedestal. ƔInstall or remove the TV from the pedestal with at least two people. ƔInstall or remove the TV by the specified procedure. onto the mains plug body when disconnecting the plug. Inserting remote’s batteries Attaching the pedestal Ŷ Battery for the Remote Control Warning ƔDo not disassemble or modify the pedestal. • Do not pull on the lead. Hold Watching External Inputs ··········· 7 ƔBase Press the hook and lift the cover Caution ƔThis appliance is intended for use in tropical climates. Ŷ Pedestal high temperature object. 1 Remove the assembly screws from the TV. 2 Pull out the pedestal from the TV. 3 Remove the assembly screws from the bracket. (M4 × 15) × 4 ƔBracket ƔExternal equipment and cables shown are not supplied with this TV. ƔEnsure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. ƔCheck the type of terminals and cable plugs are correct when connecting. ƔWhen using an HDMI cable, use the fully wired one. ƔKeep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor. Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered. ƔAlso read the manual of the equipment being connected. Ŷ Use conditions Warning ƔThis product contains possibly dangerous parts such as plastic bags, that can be breathed in or swallowed by young children accidentally. Keep these parts out of reach of young children. • Do not place the lead near a ×3 Ŷ When not in use for a long time Ŷ Dangerous part / Small object ƔDo not damage the mains lead. • Do not place a heavy object on the lead. Safety Precautions ··················· 2 Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV. ƔAssembly screws Caution This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live socket outlet. ƔRemove the mains plug from the wall socket when the TV is not in use for a prolonged period of time. Connecting the TV Removing the pedestal from the TV Pedestal Caution Before moving the TV, disconnect all cables. To prevent the spread of fire, keep candles or other open flames away from this product at all times ƔThis TV is designed to operate on: – A400G/K, A408K, A409K, A410G/K series: AC 220 - 240 V, 50/60 Hz – A400X, A410M/X series: AC Auto 110 - 240V, 50/60 Hz ƔInsert the mains plug fully into the socket outlet. ƔEnsure that the mains plug is easily accessible. ƔDisconnect the mains plug when cleaning the TV. Ɣ Do not touch the mains plug with wet hands. Operating Instructions LED TV Ŷ Moving the TV ƔDo not place the TV on sloped or unstable surfaces, and ensure that the TV does not hang over the edge of the base. ƔThis TV is designed for table-top use. ƔDo not expose the TV to direct sunlight and other sources of heat. 7 1/28/2014 10:45:09 AM TH-32A400_408_409_410KGMX_EN.indd 7 10:45:10 AM 1/28/2014 11:15:30 Using the Media Player Media Player allows you to enjoy photo, music or video recorded on a USB Flash Memory. ƔThe picture may not appear correctly on this TV depending on the digital cameras used. ƔDisplay may take some time when there are many files and folders in the USB Flash Memory. ƔPartly degraded files might be displayed at a reduced resolution. ƔThe folder and file names may be different depending on the digital camera used. To playback the selected file only Select the folder [View] OK [Slideshow] Lets you toggle between thumbnail view and folder view. [Option Menu] Ŷ [Transition Effect] ƔInsert or remove straightly and completely. Ŷ [Repeat] USB Ŷ [Back Ground Music] Note ƔPicture quality may suffer depending on the slideshow settings. ƔPicture setting may not work depending on the slideshow settings. My Music_2 Nature4 Trip5 Nature5 EXIT RETURN Room adjust or access Nature1 Music Nature6 2010_4 Picture Menu 2010_7 Viewing Mode Backlight Contrast Brightness Colour OPTION Info Option Menu Drive Select USB Contents Select Operation guide Viewing Mode Info Option Menu Drive Select Select the title Select the file EXIT Info Option Menu RETURN View Select Drive Select USB Contents Select Follow the operation guide to perform available operations in Music mode. USB INFO To display / hide the operation guide during playback Contents Select Operation guide To playback all music in the selected folder : Error display R Follow the operation guide to perform available operations in Photo mode. Play OK 1/28/2014 10:45:10 AM Supported file format in Media Player JPEG (.jpg, .jpeg) – Supported image resolution: 8 × 8 to 30,719 × 17,279 – DCF and EXIF standards – Sub-sampling: 4:4:4, 4:2:2, 4:2:0 – Progressive JPEG is not supported. Ŷ Music MP3 (.mp3) / AAC (.m4a) / WMA (.wma) FLAC (.flac) / WAV (.wav) / Ŷ Video Aspect AVI (.avi) / MKV (.mkv)/ASF (.asf, .wmv) / MP4 (.mp4, .m4v) / FLV (.flv) / 3GPP (.3gp, .3g2) / TS (.ts) / PS (.vob, .vro) / RMVB Ŷ [16:9] Directly displays the image at 16:9 without distortion (anamorphic). Copy-protected files cannot be played back. WMA Pro and WMA Lossless are not supported. RMVB files are only supported by A408K, A409K, A400K and A410K/M series. Ŷ [14:9] Displays the image at the standard 14:9 without distortion. Note ƔEven if these conditions are fulfilled, some files may not be played back depending on how they are encoded. ƔDo not use two-byte characters or other special codes for data. ƔThe device may become unusable with this TV if the file or folder names are changed. Ŷ [Just] Displays a 4:3 image full-screen. Stretching is only noticeable at the left and right edges. Ŷ [4:3] Displays the image at the standard 4:3 without distortion. Ŷ [Zoom2] Ŷ Applicable HDMI features ƔInput audio signal: 2ch Linear PCM (sampling frequencies - 48 kHz, 44.1 kHz, 32 kHz) ƔInput video signal: “Input signal that can be displayed” (p. 12) Match the output setting of the digital equipment. Displays a 16:9 letterbox (anamorphic) image full-screen without distortion. Ŷ [Zoom3] Displays a 2.35:1 letterbox (anamorphic) image full-screen without distortion. At 16:9, displays the image at its maximum (with slight enlargement). Ŷ DVI connection If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adaptor cable. When the DVI to HDMI adaptor cable is used, connect the audio cable to the audio input terminal as follows: ƔA410M/X only: use AV1 IN AUDIO terminals ƔOther models: use AV IN AUDIO terminals Input signal that can be displayed COMPONENT HDMI 525 (480) / 60i, 60p 625 (576) / 50i, 50p Note Ɣ Audio settings can be made on [HDMI1 / 2 Input] in the Sound Menu (p. 10). ƔThese HDMI connectors are “type A”. ƔThese HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection. Ɣ Equipment having no digital output terminal may be connected to the input terminal of component or video to receive analogue signals. 750 (720) / 60p, 50p 1,125 (1,080) / 60i, 50i 1,125 (1,080) / 60p, 50p, 24p Mark : Applicable input signal ƔSignals other than above may not be displayed properly. Ɣ The above signals are reformatted for optimal viewing on your display. For playing back in Media Player Format: FAT16, FAT32 Compliance: Supports only USB1.1 or USB2.0 standard. Maximum USB capacity supported is 16GB. USB Hub or card adapter is not supported. Turn the TV off with Mains power On / Off switch, then turn it on again. If the problem persists, initialise all [Shipping Condition] (p. 11) settings Pictures from equipment connected via HDMI are unusual Check the HDMI cable is connected properly. Î Turn the TV and equipment off, then turn them on again. Î Check an input signal from the equipment (p. 12). Î Use equipment compliant with EIA/CEA-861/861D. Î Note ƔData modified with a PC may not be displayed. ƔDo not remove the device while the TV is accessing data. Otherwise this can damage the device or TV. ƔDo not touch the pins on the device. ƔInsert the device in the correct direction. Otherwise this can damage device or TV. ƔElectrical interference, static electricity, or erroneous operation may damage the data or device. Panasonic is not liable for any deterioration or damage of data or device during operations with the TV. ƔIt is recommended to connect the USB Flash Memory directly to the TV’s USB port. ƔSome USB devices or USB HUB may not be used with this TV. ƔYou cannot connect any devices by using USB card reader. ƔAdditional information for USB devices may be on the following website. (English only) http://panasonic.jp/support/global/cs/tv/ Sound [Mode] Sets preset sound mode. The selected mode affects all input signals. [Music] : Improves sound quality for watching music videos, etc. [Speech] : Improves sound quality for watching news, drama, etc. [User]: Adjusts the sounds manually by using the equaliser – For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass] and [Treble]. Select [Equaliser] and adjust the frequency (below). Î Check the sound mute setting (p. 6) and volume. Low level or distorted sound Î Î This TV is equipped with auto power standby function (p. 12) The remote control does not work or is intermittent Replace the batteries (p. 4). Point the remote control directly at the remote control signal receiver of the TV (within about 7 m and 30 degree angle). Î Situate the TV away from sunshine or block sources of bright light from shining on the remote control signal receiver of the TV. Î Î Parts of the TV become hot Î Even if the temperature of parts of the front, top and rear panels has risen, these temperature rises do not cause any problems in terms of performance or quality. The LCD panel moves slightly when it is pushed with a finger Chaotic image, noisy Set [P-NR] in the Picture Menu to remove noise (p. 10). Î Check nearby electrical products (car, motorcycle, fluorescent lamp). Î Clattered sound might be heard Î There is some flexibility around the panel to prevent damage. This is not a malfunction. Overcurrent error message appears No image is displayed The connected USB device might cause this error. Remove the device and turn the TV off with Mains power On / Off switch, then turn it on again. Î Check foreign objects are not inside the USB port. Î Check the settings of [Contrast], [Brightness] or [Colour] in the Picture Menu (p. 9). Î Check the TV is in AV mode. If the TV is in AV mode, check the selected input mode match the output of the external equipment (p. 7). Î Blurry or distorted image (no sound or low volume) Î Resets channels [Auto Tuning] or [Manual Tuning] (p. 11) TH-32A400_408_409_410KGMX_EN.indd 13 Ŷ [Child Lock List] Displays the Child Lock List. – From the list, selects the channel / input to be locked. [Tuning Menu] (p. 11) [OSD Language] Changes language for on-screen displays (p. 6) TH-32A400G TH-32A400K TH-32A400X TH-32A408K TH-32A409K Audio output 20 W (10 W + 10 W) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Display panel Panel TFT LCD Module with LED Backlight Visible screen size (diagonal) 80 cm Display resolution 1,366 (W) × 768 (H) Set to [On] to display a continuous record of time spent using Game mode every 30 minutes [Off] / [On] – This function is available when [Viewing Mode] is set to [Game]. Mass 5.5 5.0 (With Pedestal) (TV only) Connection terminals AV IN / AV1 IN (COMPONENT / VIDEO) VIDEO RCA PIN Type × 1, 1.0 V[p-p] (75 :) AUDIO L - R RCA PIN Type × 2, 0.5 V[rms] Y 1.0 V[p-p] (including synchronisation) PB, PR ±0.35 V[p-p] AV2 IN (A410M/X only) VIDEO RCA PIN Type × 1, 1.0 V[p-p] (75 :) AUDIO L - R RCA PIN Type × 2, 0.5 V[rms] HDMI 1 / 2* input TYPE A Connectors USB USB 2.0 TYPE A Connectors DC 5 V, Max. 500 mA TH-32A400_408_409_410KGMX_EN.indd 14 R Channel List will be set to [Tune]. Ŷ [Reveal all] Reveals all hidden channels. Ŷ [Software Licence] Y Displays the software licence information of the TV. Ŷ [System Information] Channel List will be set to [Reveal all]. [Auto Tuning] Displays the system information of the TV. Scans and stores all channels automatically. [Other Settings] Auto Tuning Ŷ [Colour System] Selects optimum colour system based on video signals in AV mode [Auto] / [PAL] / [SECAM] / [M.NTSC] / [NTSC] All tuning data will be erased EXIT Start Auto Tuning Ŷ [Colour Matrix] RETURN Adjusts suitable colour parameters for [SD] (standard definition) or [HD] (high definition) – [SD]: Input signal is a normal TV system – [HD]: Input signal is a high de¿nition system • Available only with 480p or 576p input on video signals in a natural colour from digital equipment connected to AV1 component or HDMI1 / HDMI2 terminals. ƔIf tuning has not been done completely [Manual Tuning] (below) [Manual Tuning] Scans and stores channels manually. Manual Tuning 1 Fine Tuning Manual Tuning Sound System Colour System Sets the duration of time that the TV will remain on when no operation is performed [Off] / [2] / [4] (hours) – Automatic input switching with the connected equipment affects this function and time-count will be reset. – The noti¿cation message will appear 3 minutes before going into Standby mode. CH57 100% 0% B/G Auto 1 Set [Sound System] and [Colour System]. • Normally set [Colour System] to [Auto]. 2 Select a channel position to store the channel. • If a VCR is connected only with the RF cable, select channel position [0]. Ŷ [Power Save] 3 Start tuning. Reduces brightness of picture to economise on power consumption [Off] / [On] • Tuning stops when a channel is found. 4 Press OK to store the channel or press the cursor Ŷ [16:9 Overscan] button to continue tuning. Selects the screen area displaying the image – [On]: Enlarges the image to hide the edge of the image. – [Off]: Displays the image in the original size. • Set to [On] if noise is generated on the edge of the screen. • This function is available when aspect is set to [16:9]. • This function can be memorised separately for SD (Standard definition) and HD (High definition) signals. Ŷ [Fine Tuning] Refines the tuning of a channel. TH-32A400_408_409_410KGMX_EN.indd 11 1/28/2014 10:45:11 AM HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. NTSC 4.43/5.5 MHz NTSC 4.43/6.0 MHz NTSC 4.43/6.5 MHz NTSC 3.58/5.5 MHz NTSC 3.58/6.0 MHz NTSC 3.58/6.5 MHz SECAM I Playback from Special VCR’s or DVD Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. For stubborn dirt Playback from Special Disc Players and Special VCR’s or DVD Caution ƔDo not use a hard cloth or rub the surface too hard as this could scratch the surface. ƔDo not subject the TV’s surfaces to water or detergent. Liquid inside the TV could lead to product failure. ƔDo not subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may degrade surface quality or cause peeling of the paint. ƔThe surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the surface with your fingernail or other hard objects. Ɣ Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may degrade surface quality. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. RealMedia, RealVideo and RealAudio are trademarks or registered trademarks of RealNetworks, Inc. These statements are under the Licence Agreement with RealNetworks, Inc. 4.4.2.1 Terms of use must prohibit the user from modifying, translating, reverse engineering, decompiling, disassembling or using other means to discover the Source Code or otherwise replicate the functionality of the Client Code, except to the extent that this restriction is expressly prohibited by applicable law. 4.4.2.2 Terms of use must effectively disclaim on behalf of Real all warranties and conditions other than those set forth in this Agreement, express and implied, including implied warranties or conditions of merchantability and fitness for a particular purpose; and effectively exclude all liability for indirect, special, incidental and consequential damages, including but not limited to lost profits or replacement systems. Licence This product incorporates the following software: (1) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0), (2) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or (3) open sourced software other than the software licensed under the GPL and/or LGPL. Aerial input VHF / UHF Operating conditions Temperature 0 °C - 40 °C Humidity 20 % - 80 % RH (non-condensing) Note Ɣ Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate. * HDMI 2 input is available for A410 series only. The software categorized as (1) - (3) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Please refer to the detailed terms and conditions thereof shown in the “Software License” menu on this product. At least three (3) years from delivery of this product, Panasonic Corporation will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL V2.1 or the other licenses with the obligation to do so, as well as the respective copyright notice thereof. Contact Information: cdrequest@unipf.jp The source code and the copyright notice are also available for free in our website below. http://www.unipf.jp/dl/ATV13AR/ 14 1/28/2014 10:45:12 AM Retunes each channel (Manual Tuning). Resets all settings to the original condition. – Access this function and follow the on-screen instructions to complete the procedures. – Initial Setup will automatically start after [Shipping (p. 6). Condition] completes First clean the dust on the surface. Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Wring the cloth and wipe the surface. Finally, wipe away all the moisture. VHF BAND 2-12 (PAL/SECAM B, K1) 0-12 (PAL B AUST.) 1-9 (PAL B N.Z.) 1-12 (PAL/SECAM D) 1-12 (NTSC M Japan) 2-13 (NTSC M USA) UHF BAND 21-69 (PAL G, H, I/SECAM G, K, K1) 28-69 (PAL B AUST.) 13-57 (PAL D, K) 13-62 (NTSC M Japan) 14-69 (NTSC M USA) CATV S1-S20 (OSCAR) 1-125 (USA CATV) C13-C49 (JAPAN) S21-S41 (HYPER) Z1-Z37 (CHINA) 5A, 9A (AUST.) A410 series: 734 mm × 502 mm × 184 mm (With Pedestal) 734 mm × 437 mm × 69 mm (TV only) : [hide] (skip) Ŷ [Tune] Ŷ [Shipping Condition] Reception of broadcast transmissions and Playback from Video Cassette Tape Recorders Receiving channels A400, A408, A409 series: 734 mm × 477 mm × 184 mm (With Pedestal) 734 mm × 437 mm × 69 mm (TV only) : [reveal] [System Menu] Function 15 PAL 60 Hz/5.5 MHz 16 PAL 60 Hz/6.0 MHz 17 PAL 60 Hz/6.5 MHz Dimensions (W × H × D) Channel List Editor Ŷ [Playing Time Display] PAL B, G, H PAL I PAL D, K SECAM B, G SECAM D, K SECAM K1 NTSC M (NTSC 3.58/4.5 MHz) Systems Power consumption (Rated power / Standby power) Select a channel, then reveal / hide Regular care 17 Systems A400G/K, A408K, A409K, A410G/K series: AC 220 - 240 V, 50/60 Hz Hides unwanted channels. The hidden channels cannot be displayed except in this function. Sets how long the Information banner stays on screen (p. 6) [0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] / [7] / [8] / [9] / [10] (seconds)] ƔGently wipe the surface of the display panel, cabinet and pedestal by using a soft cloth. ƔWipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock. Receiving systems / Band name Power source [Channel List Edit] Ŷ [Banner Display Timeout] First, remove the mains plug from the socket outlet. Sound TH-32A410G TH-32A410K TH-32A410M TH-32A410X TV mode only Maintenance AUDIO OUT RCA PIN Type × 1, 0.5 V[rms] Model no. [Tuning Menu] lets you retune your TV, skip unwanted channels, etc. Accesses the input labels list to select the label of each input mode or set to skip unconnected one for easier identification and selection in [Input Selection] (p. 7) or banner – To skip the input mode, select [Skip]. 11 1/28/2014 10:45:11 AM Specifications 13 1/28/2014 10:45:11 AM Lets you change your PIN number. – Enter a new PIN number twice. – Performing [Shipping Condition] erases the PIN number and all settings. TH-32A400_408_409_410KGMX_EN.indd 10 A400X, A410M/X series: 58 W / 0.35 W The TV goes into Standby mode This is the characteristic of liquid crystal panels. The liquid crystal panel is built with very high precision technology. Occasionally, a few non-active pixels may appear on the screen as points of red, green, blue or black. This does not affect the performance of your TV and it is not a quality problem. Ŷ [Change PIN] [Equaliser] Select the frequency and change the frequency level by using the cursor buttons. Ɣ This function is available when [Mode] is set to [User]. ƔTo enhance the bass sound, raise the level of the lower frequency. To enhance the treble sound, raise the level of the higher frequency. Ɣ To reset the levels of each frequency to the default settings, select [Reset to Defaults] by using the cursor button, and then press the OK button. Using the [Tuning Menu] Ŷ [Auto Standby] First setting: On the [Child Lock-PIN Entry] screen, enter your preferred number twice to create the PIN. [Bass] / [Treble] Adjusts the effect to your preference. Sound output via HDMI connection is unusual Set the sound setting of the connected equipment to “2ch L.PCM”. Î Check the [HDMI1 / 2 Input] setting in the Sound Menu (p. 10). Î If digital sound connection has a problem, select analogue sound connection (p. 12). Screen [Child Lock] Locks channels / AV input modes Enter the PIN number (4 digits) to access. Music and Speech modes, you can adjust [Bass] and [Treble] settings, and those settings will be stored for each mode. A400G/K, A408K, A409K, A410G/K series: 57 W / 0.35 W Î Red, blue, green or black spots on the screen [Off Timer] Sets the time until the TV automatically goes to Standby mode [Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) In Î Sound signal reception may be deteriorated. Î Set [MPX] (p. 10) in the Sound Menu to [Mono]. Before requesting service or assistance, please follow these simple guides to resolve the problem. If an error message appears, follow the message’s instructions. If the problem still persists, please contact your local Panasonic dealer for assistance. Setup Menu A400X, A410M/X series: AC Auto 110 - 240V, 50/60 Hz No sound is produced Troubleshooting 12 TH-32A400_408_409_410KGMX_EN.indd 12 EN_A2.indd 2 Unusual image is displayed General This TV incorporates HDMI™ technology. HDMI (highdefinition multimedia interface) is the world’s first complete digital consumer AV interface complying with a noncompression standard. HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment. Displays a 4:3 image enlarged horizontally to fit the screen. Ɣ HD signal only Ŷ [Zoom1] Displays a 16:9 letterbox or 4:3 image without distortion. Signal name 1/28/2014 10:45:10 AM USB Flash Memory [Reset to Defaults] Press OK to reset the present settings of [Mode], [Balance] and [Surround] to the default. [Display Settings] Ŷ [Input Labels] 10 TH-32A400_408_409_410KGMX_EN.indd 9 HDMI connection Ŷ [4:3 Full] Access [Backlight] / [Contrast] / [Brightness] / [Colour] / [Sharpness] Adjusts the levels of these options to your preference. [16:9] / [14:9] / [Just] / [4:3] / [4:3 Full] / [Zoom1] / [Zoom2] / [Zoom3] – You can also change the aspect using the ASPECT button. Î Ŷ Photo The TV will automatically go into Standby mode in the following conditions: ƔNo signal is received and no operation is performed for 30 minutes in Analogue TV mode. Ɣ [Off Timer] is active in the Setup Menu. ƔNo operation is performed for the period selected in [Auto Standby] (p. 11). [Reset to Defaults] Press OK to reset the present picture [Viewing Mode] of the selected input to the default settings. 9 TH-32A400_408_409_410KGMX_EN.indd 8 Auto power standby function Access In each Viewing Mode, [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [Colour Balance], [Eco Mode], [P-NR] and [3D-COMB] can be adjusted and stored for each input. Ŷ [Aspect Change] [HDMI1/2 Input] Selects to fit the input signal (p. 12) [Digital]: When sound is carried via the HDMI cable connection [Analogue]: When sound is not carried via the HDMI-DVI adaptor cable connection ƔFor HDMI input Sound Menu [Viewing Mode] Sets preset picture mode for each input. [Dynamic]: Improves contrast and sharpness. [Normal]: For viewing in a normal lighting condition. [Cinema]: Improves the performance of contrast, black and colour reproduction. [True Cinema]: Reproduces the original image quality precisely without any revision. [Game]: For viewing when playing games – Not valid on TV mode. – To display a continuous record of time spent using Game mode [Playing Time Display] (p. 11). During movie playback: Ŷ [Multi Audio] Selects the sound tracks (if available) Ŷ [Subtitle] Selects the subtitle (if available) [Off] / [Subtitle1] (/ [Subtitle2] ...) [MPX] Selects multiplex sound mode (if available) [Stereo]: Use this normally [Mono]: When stereo signal cannot be received [M1] / [M2]: Available while mono signal is transmitted [3D-COMB] Makes still or slow moving pictures more vivid [Off] / [On] ƔOccasionally, while viewing still or slow moving pictures, colour patterning may be seen. Set to [On] to display sharper and more accurate colours. ƔFor PAL or NTSC signal reception only. ƔNot valid on Component, HDMI and Media Player. OK R 8 Additional Information Change / adjust Note Ɣ A different menu will be displayed in the mode of Media Player (p. 8 - 9). ƔOnly available items can be selected. To playback the selected file in the title folder [Speaker Distance to Wall] Compensates for the low frequency sound due to the distance between the speakers and the wall [Up to 30cm] / [Over 30cm] ƔIf the back space between the TV and wall is over 30 cm, [Over 30cm] is recommended. ƔIf the back space between the TV and wall is within 30 cm, [Up to 30cm] is recommended. 50 Child Lock While in thumbnail view: Ŷ [Repeat] Playback repeat within the title [Off] / [On] – Only the selected folder will be repeated. Operation guide View Select Slideshow OK To playback all movies in the selected title folder R [Volume Correction] Adjusts the volume of individual channel or input mode [P-NR] (Picture Noise Reduction) Reduces unwanted picture noise and flicker noise in the contoured parts of a picture [Off] / [Min] / [Mid] / [Max] ƔAccess the submenu [Option Menu] My Music_3 EXIT RETURN OK Picture Menu All photos Access Select Play Folder Select Dynamic Contrast Contains [Video Setup Menu] to set up Movie mode. Photo 100 50 0 50 ƔAdjust the intensity bar INFO Folder view Photo mode Media Player 1/2 Dynamic ƔChange the setting option : Error display OK B My Music_1 Nature3 Access Select Play Folder Music mode Media Player Trip4 To display / hide the operation guide and information banner during playback Background music during photo viewing [Off] / [Type 1] / [Type 2] / [Type 3] Switching between modes When you are in the thumbnail view of any mode, you change to the other mode by returning to the [Contents Select] screen. OK 3 Select the item you want, then change / Follow the operation guide to perform available operations in Movie mode. Slideshow repeat [Off] / [On] [Contents Select] Trip3 [Auto Gain Control] Automatically regulates large sound level differences between channels and inputs [Off] / [On] [Eco Mode] Automatic Brightness Control function Adjusts picture settings automatically depending on ambient lighting conditions [Off] / [On] Setup Title view 2010_9 Slideshow interval [5] / [10] / [15] / [30] / [60] / [90] / [120] (seconds) [Photo]: Displays the thumbnail of all photos in the USB device. [Music]: Displays the thumbnail of music folders in the USB device. [Movie]: Displays the thumbnail of video titles in the USB device. Trip2 Nature2 Ŷ [Interval] Movie Picture Example: Screen mode for Single view and Slideshow [Normal] / [Zoom] – Depending on the photo size, it may not be fully enlarged to ¿ll the screen, e.g. portrait style picture. 3 Select the mode Main Menu Sound Movie [Surround] Surround sound settings [Off] / [On] [Channel Colour Set] Adjusts the suitable colour density from 3 levels for each channel. ƔSelect the channel to adjust and set this function. 2 Select the menu Movie mode Trip1 Ŷ [Screen Mode] MEDIA PLAYER MENU [Off]: Playback repeat off [One]: Playback repeat on the selected one file [Folder]: Playback repeat within the selected folder Media Player Effect for photo switching during slideshow [None] / [Dissolve] / [Wipe right] / [Wipe left] / [Wipe up] / [Wipe down] / [Box out] / [Random] 2 Start Media Player 1 Display the menu Ŷ [Repeat] [Balance] Adjusts volume level of right and left speakers [Colour Balance] Sets the overall colour tone of the picture. [Cool] / [Normal] / [Warm] ƔNot valid when [Viewing Mode] is set to [True Cinema] Contains [Music Setup Menu] to set up play mode. [View Select] Contains [Slideshow Settings] menus to set up slideshow. Music R OK [Tint] Adjusts the picture hue. ƔFor NTSC signal, Component or HDMI input Using the Menu Functions Play [Option Menu] Lets you view all photos in the slideshow mode TV Photo Select the file Enters Single view mode to view photo one at a time 1 Insert the USB Flash Memory Contents Select EXIT Select RETURN Access INFO To display / hide the operation guide during [Single View] and [Slideshow] (Only supported by A408K, A409K, A400K and A410K/M series) Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected. 15 1/28/2014 10:45:12 AM TH-32A400_408_409_410KGMX_EN.indd 15 10:45:12 AM 1/28/2014 11:15:31
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Creator Tool : Adobe InDesign CS5.5 (7.5.3) Modify Date : 2014:02:25 08:30:50+08:00 Create Date : 2014:01:28 11:16:26+08:00 Metadata Date : 2014:02:25 08:30:50+08:00 Format : application/pdf Title : EN_A2.indd Creator : LING Producer : Acrobat Distiller 10.1.9 (Windows) Document ID : uuid:0c5ebcb3-91ee-488a-8c09-285077aab00b Instance ID : uuid:7c0dd5b5-e0df-4a44-bc79-065b8593a5bd Page Count : 2 Author : LINGEXIF Metadata provided by EXIF.tools