Terrain Fuze HDPE Product Guide
User Manual: Terrain Fuze HDPE Product Guide
Open the PDF directly: View PDF 
.
Page Count: 15
| Download | |
| Open PDF In Browser | View PDF |
TAGIG1-PT JULY 2009 Terrain HDPE Product Guide Terrain HDPE BBA BRITISH BOARD OF AGRÉMENT CERTIFICATE No. 07/4479 A modern high density polyethylene system with many advantages over cast iron and other traditional systems. Terrain HDPE is a top-to-bottom solution for all above ground drainage and many chemical waste applications. It allows specifiers and installers to benefit by providing them maximum flexibility in the design process. Utilising the intrinsic properties of high-density polyethylene, Terrain HDPE offers greater benefits above and beyond more traditional materials and performs significantly better when tested for impact and abrasion resistance, chemical corrosion and extreme temperatures. The lightweight nature of Terrain HDPE allows the product to be installed quickly and efficiently, giving direct, resource-saving benefits to specifiers and installers. HDPE offers exceptional performance above and beyond traditional pipe materials including: ■ ■ ■ ■ Versatile application Highly resistant to impact even at low temperatures Highly resistant to chemical agents Corrosion resistant ■ ■ ■ ■ Abrasion resistant Lightweight and easy to install Ideal for pre-fabrication Suitable for use with Terrain HydroMax™ Siphonic System (see page 41 for further details) Innovative Products Building on its reputation for innovation, Terrain has developed these problem solving products to offer unrivalled installation options Ventilation Branch ■ ■ ■ ■ ■ ■ Negates the need for a separate ventilation pipe Reduces the speed of the descending water 3 x 110mm and 3 x 75mm connections Ventilation at each branch Available in 110mm or 160mm See page 28 for further details Universal Soil Manifold ■ ■ ■ ■ ■ ■ For connection of 56mm waste pipes at floor level 4 inlets Compact size 110mm & 160mm 110mm available with 90° or 45° inlets See page 24 for further details 2 Terrain Pipes Fittings Size mm Packing Length Pack Code Quantity Size mm HDPE Pipe - 5 metre length 40 50 56 63 75 90 110 125 160 200 250 315 550 430 490 330 290 290 285 170 50 50 40 30 110 86 98 66 58 58 57 34 10 10 8 6 HDPE 45° bend with socket branch 900.40.50 900.50.50 900.56.50 900.63.50 900.75.50 900.90.50 900.110.50 900.125.50 900.160.50 900.200.50 900.250.50 900.315.50 110/40 90/40 110/50 150 150 120 105 90 60 45 30 30 s shown are for one item excluding VAT 50 50 40 35 30 20 15 10 10 900.40.30 900.50.30 900.56.30 900.63.30 900.75.30 900.90.30 900.110.30 900.125.30 900.160.30 *Segmented Note: Orders must be in pack quantity multiples Fittings Size mm Pack Quantity Code 50 25 25 20 25 15 10 10 1 1 1 1 907.200.90 907.250.90 907.315.90 *Segmented HDPE 91.5° (88.5°) bend 3 50 20 20 25 20 15 15 10 1 901.40.92 901.50.92 901.56.92 901.63.92 901.75.92 901.90.92 901.110.92 901.125.92 901.160.92 40 30 25 30 25 20 25 15 1 1 1 1 901.40.135 901.50.135 901.56.135 901.63.135 901.75.135 901.90.135 901.110.135 901.125.135 901.160.135 901.200.135 901.250.135 901.315.135 40 50 56 63 75 90 110 40 20 20 20 10 10 10 901.40.180 901.50.180 901.56.180 901.63.180 901.75.180 901.90.180 901.110.180 40 20 901.5040.90 901.6350.90 40 50 56 63 75 90 110 125 160 200* 250* 315* HDPE branch 90° 50 20 20 15 20 15 10 10 1 1 1 1 904.40.135 904.50.135 904.56.135 904.63.135 904.75.135 904.90.135 904.110.135 904.125.135 904.160.135 904.200.135 904.250.135 904.315.135 40 50 56 63 75 90 110 125 160 200* 250* 315* 50 25 25 20 15 20 15 15 1 1 1 1 904.40.90 904.50.90 904.56.90 904.63.90 904.75.90 904.90.90 904.110.90 904.125.90 904.160.90 904.200.90 904.250.90 904.315.90 HDPE Y branch 45° *Welded 40 50 56 63 75 90 110 125 160 40 50 56 63 75 90 110 125 160 200* 250* 315* HDPE 180° bend 50/40 63/50 907.40.90 907.50.90 907.56.90 907.63.90 907.75.90 907.90.90 907.110.90 907.125.90 907.160.90 HDPE 90° wide radius bend 200* 250* 315* 901.11040.135 901.9040.135 901.11050.135 HDPE 90° reducing bend HDPE 90° bend 40 50 56 63 75 90 110 125 160 1 1 1 HDPE 45° bend HDPE Pipe - 3 metre length 40 50 56 63 75 90 110 125 160 Pack Code Quantity *Welded HDPE Fittings Fittings Size mm Pack Code Quantity Size mm HDPE reducing Y branch 45° *Welded 50/40 56/50 63/40 63/50 63/56 75/40 75/50 75/56 75/63 90/40 90/50 90/56 90/63 90/75 110/40 110/50 110/56 110/63 110/75 110/90 125/40 125/50 125/56 125/63 125/75 125/90 125/110 160/110 160/125 200/110* 200/125* 200/160* 250/110* 250/125* 250/160* 250/200* 315/110* 315/125* 315/160* 315/200* 315/250* 20 20 15 15 15 25 25 25 25 15 15 20 15 15 10 10 10 10 10 10 10 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 HDPE double Y branch 60° 904.5040.135 904.5650.135 904.6340.135 904.9056.135 904.6350.135 904.6356.135 904.7540.135 904.9075.135 904.7550.135 904.7556.135 904.9040.135 904.7563.135 904.9050.135 904.11040.135 904.9063.135 904.11050.135 904.11056.135 904.11063.135 904.11075.135 904.11090.135 904.12540.135 904.12550.135 904.12556.135 904.12563.135 904.12575.135 904.12590.135 904.125110.135 904.160110.135 904.160125.135 904.200110.135 904.200125.135 904.200160.135 904.250110.135 904.250125.135 904.250160.135 904.250200.135 904.315110.135 904.315125.135 904.315160.135 904.315200.135 904.315250.135 50/40 63/50 110/110 15 25 25 10 906.5040.60 906.6350.60 906.110.60 HDPE reducing branch 90° 50/40 56/50 6¾0 63/50 63/56 75/40 75/50 75/56 75/63 90/40 90/50 90/56 90/63 90/75 110/40 110/50 110/56 110/63 110/75 110/90 125/110 160/110 160/125 200/110* 200/125* 200/160* 250/110* 250/125* 250/160* 250/200* 315/110* 315/125* 315/160* 315/200* 315/250* HDPE swept branch fitting 110/110 Pack Code Quantity 904.315200.135 25 25 20 20 20 25 20 20 20 20 20 20 20 20 15 15 15 15 15 15 15 1 1 1 1 1 1 1 1 1 1 1 1 1 1 904.5040.90 904.5650.90 904.6340.90 904.6350.90 904.6356.90 904.7540.90 904.7550.90 904.7556.90 904.7563.90 904.9040.90 904.9050.90 904.9056.90 904.9063.90 904.9075.90 904.11040.90 904.11050.90 904.11056.90 904.11063.90 904.11075.90 904.11090.90 904.125110.90 904.160110.90 904.160125.90 904.200110.90 904.200125.90 904.200160.90 904.250110.90 904.250125.90 904.250160.90 904.250200.90 904.315110.90 904.315125.90 904.315160.90 904.315200.90 904.315250.90 *Welded HDPE 180° double branch ball fitting HDPE 45° double reducing branch 110/40 110/50 110/110 10 10 10 906.11040.135 906.11050.135 906.110.135 110/50 110/56 110/75 110/90 110/110 125/50 125/56 125/75 125/90 125/110 125/125 5 5 5 5 5 5 5 5 5 5 5 916.11050.180 916.11056.180 916.11075.180 916.11090.180 916.110.180 916.12550.180 916.12556.180 916.12575.180 916.12590.180 916.125110.180 916.125.180 4 Terrain Fittings Fittings Size mm Pack Code Quantity Size mm Pack Code Quantity HDPE 90° double branch ball fitting HDPE universal soil manifold 110/50 110/56 110/75 110/90 110/110 125/50 125/56 125/75 125/90 125/110 125/90 125/125 For connections of 56mm waste pipes at floor level. Incorporates 4 inlets to accept 56mm waste pipes. 5 5 5 5 5 5 5 5 5 5 5 5 916.11050.90 916.11056.90 916.11075.90 916.11090.90 916.110.90 916.12550.90 916.12556.90 916.12575.90 916.12590.90 916.125110.90 916.12590.90 916.125.90 160 110 110 45° inlets 45° inlets 90° inlets 1 1 1 919.160.56 919.110.56A 919.110.56AB HDPE short ring seal socket 90/90 110/110 25 25 909.90 909.110 HDPE 135° double branch ball fitting 110/50 110/56 110/75 110/90 110/110 125/50 125/56 125/75 125/90 125/110 125/125 5 5 5 5 5 5 5 5 5 5 5 916.11050.135 916.11056.135 916.11075.135 916.11090.135 916.110.135 916.12550.135 916.12556.135 916.12575.135 916.12590.135 916.125110.135 916.125.135 HDPE 90° multi branch ball fitting 110/50 110/56 110/75 110/90 110/110 125/50 125/56 125/75 125/90 125/110 125/125 5 5 5 5 5 5 5 5 5 5 5 916.11050.903 916.11056.903 916.11075.903 916.11090.903 916.110.903 916.12550.903 916.12556.903 916.12575.903 916.12590.903 916.125110.903 916.125.903 HDPE 135° multi branch ball fitting 110/50 110/56 110/75 110/90 110/110 125/50 125/56 125/75 125/90 125/110 5 5 5 5 5 5 5 5 5 5 916.11050.1353 916.11056.1353 916.11075.1353 916.11090.1353 916.110.1353 916.12550.1353 916.12556.1353 916.12575.1353 916.12590.1353 916.125110.1353 5 5 5 5 5 5 5 5 5 5 5 5 40 50 56 63 75 90 110 125 160 200 250 315 916.11050.904 916.11056.904 916.11075.904 916.11090.904 916.110.904 916.12550.904 916.12556.904 916.12575.904 916.12590.904 916.125110.904 916.125.904 40 30 30 20 20 25 10 10 1 1 1 1 927.40 927.50 927.56 927.63 927.75 927.90 927.110 927.125 927.160 927.200 927.250 927.315 HDPE expansion joint with cap 40 50 56 63 75 90 110† 125 160 200 †For Rigid pipe support 250* *without cap 315* 20 15 15 15 10 15 10 10 1 1 1 1 911.40 911.50 911.56 911.63 911.75 911.90 911.110 911.125 911.160 911.200 911.250 911.315 HDPE spigot bend with cap 40/46 50/46 50/58 56/46 56/58 40 40 20 20 20 917.4046.90 917.5046.90 917.5058.90 917.5646.90 917.5658.90 HDPE extended spigot bend 56 HDPE 90° multi branch ball fitting 110/50 110/56 110/75 110/90 110/110 125/50 125/56 125/75 125/90 125/110 125/125 HDPE ring seal adaptors with cap 20 902.56.90 40 40 20 20 20 917.4046 917.5046 917.5058 917.5646 917.5658 HDPE sleeve 40/46 50/46 50/58 56/46 56/58 HDPE Fittings Fittings Size mm Pack Code Quantity HDPE gasket 46/36-40 58/36-40 58/47-50 100 100 100 917.4636.908 917.5836.908 917.5847.908 50 50 40 40 40 40 30 30 30 20 20 924.5040 924.5650 924.6340 924.6350 924.6356 924.7540 924.7550 924.7556 924.7563 924.9040 924.9050 HDPE concentric reducer 90/56 90/63 90/75 110/40 110/50 110/56 110/63 110/75 110/90 125/50 125/56 125/63 125/75 125/90 125/110 160/110 200/160 50 56 63 75 110 10 10 10 10 10 9120.50 9120.56 9120.63 9120.75 9120.110 30 20 20 20 15 15 936.40 936.50 936.56 936.63 936.75 936.90 936.110 HDPE screwed end cap 40 50 56 63 75 90 110 HDPE short end cap with seal 20 20 20 25 25 25 25 20 20 20 20 20 20 20 20 1 1 924.9056 924.9063 924.9075 924.11040 924.11050 924.11056 924.11063 924.11075 924.11090 924.12550 924.12556 924.12563 924.12575 924.12590 924.125110 924.160110 924.200160 110 10 9938.110 10 10 10 10 10 10 9122.50 9122.56 9122.63 9122.75 9122.90 9122.110 10 10 10 10 10 10 9121.50 9121.56 9121.63 9121.75 9121.90 9121.110 100 100 100 50 30 30 30 20 930.40 930.50 930.56 930.63 930.75 930.90 930.110 930.125 1 1 1 1 930.160 930.200 930.250 930.315 HDPE threaded union 50 56 63 75 90 110 HDPE end cap with seal HDPE threaded coupling 50 56 56/63 63 75 90 110 Pack Code Quantity HDPE nut HDPE concentric reducer 50/40 56/50 63/40 63/50 63/56 75/40 75/50 75/56 75/63 90/40 90/50 Size mm 30 20 20 20 20 15 10 912.50 912.56 912.63 912.5663 912.75 912.90 912.110 50 56 63 75 90 110 HDPE blank end HDPE ring 50 56 63 75 90 110 10 10 10 10 10 10 9118.50 9118.56 9118.63 9118.75 9118.90 9118.110 1 1 1 1 1 1 1 9119.50 9119.56 9119.63 9119.75 9119.90 9119.110 9119.110B 40 50 56 63 75 90 110 125 HDPE ring seal 50 56 63 75 90 110a 110b HDPE end cap 160 200 250 315 6 Terrain Fittings Fittings Size mm Pack Code Quantity HDPE anchor pipe 50 56 63 75 90 110 Pack Code Quantity HDPE flange adaptors 40 20 20 20 15 10 970.50 970.56 970.63 970.75 970.90 970.110 HDPE galvanised bolt with washer for flange M16x90 (50-56 flange) M16x100 (63-75 flange) M16x100 (90 flange) M16x110 (110-140 flange) M20x110 (160 flange) M20x130 (200-315 flange) Size mm 1(4pcs) 1(4pcs) 1(8pcs) 1(8pcs) 1(8pcs) 1(12pcs) 984.1650 984.1663 984.1690 984.16110 984.20160 984.20250 50 1 980.50 56 1 980.56 63 1 980.63 1 980.75 75 1 980.90 90 1 980.110 110 1 980.125 125 160 1 980.160 200 1 980.200 250 1 980.250 315 1 980.315 HDPE 90° access pipe with screw cap 50 56 63 75 1 1 1 1 938.50.90 938.56.90 938.63.90 938.75.90 HDPE 90° access pipe with screw cap Rubber flange seal 50 56 63 75 90 110 125 160 200 250 315 1 1 1 1 1 1 1 1 1 1 1 982.50 982.56 982.63 982.75 982.90 982.110 982.125 982.160 982.200 982.250 982.315 90 1 938.90.90 110 1 938.110.90 125 1 938.125.90 160 1 938.160.90 200 1 938.200.90 250 1 938.250.90 315 1 938.315.90 HDPE 45° access pipe with screw cap 110/110 125/110 160/110 1 1 1 938.110.135 938.125.135 938.160.135 Painted aluminium backing flange 50 56 63 75 90 110 125 160 200 250 315 1 1 1 1 1 1 1 1 1 1 1 981.50 981.56 981.63 981.75 981.90 981.110 981.125 981.160 981.200 981.250 981.315 Painted aluminium blank flange 50 56 63 75 90 110 125 160 200 250 315 7 1 1 1 1 1 1 1 1 1 1 1 983.50 983.56 983.63 983.75 983.90 983.110 983.125 983.160 983.200 983.250 983.315 HDPE electrofusion couplings 40 10 910.40 50 10 910.50 56 10 910.56 63 10 910.63 75 10 910.75 90 10 910.90 110 10 910.110 125 5 910.125 160 5 910.160 200 1 910.200 250 1 910.250 315 1 910.315 HDPE male PVC adaptor with ring seal 110/100 10 9113.110100 HDPE WC pan connector with cap 90 110 20 20 925.90 925.110 HDPE Fittings Fittings Size mm Pack Code Quantity HDPE male PVC adaptor 90/100 15 9113.80100 10 10 925.90100 925.110100 HDPE WC connector for PVC with ring seal 100 10 925.100 HDPE extended WC pan connector with cap 90 100 20 20 993.90 993.90 HDPE sliding connector 160 200 250 315 Pack Code Quantity HDPE eccentric reducer HDPE female PVC adaptor with ring seal 90/100 110/100 Size mm 1 1 1 1 911s.160 911s.200 911s.250 911s.315 50/40 56/50 63/40 63/50 63/56 75/40 75/50 75/56 75/63 90/40 90/50 90/56 90/63 90/75 110/40 110/50 110/56 110/63 110/75 110/90 125/50 125/56 125/63 125/75 125/90 125/110 160/110 160/125 50 30 30 30 30 30 30 30 30 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 5 5 923.5040 923.5650 923.6340 923.6350 923.6356 923.7540 923.7550 923.7556 923.7563 923.9040 923.9050 923.9056 923.9063 923.9075 923.11040 923.11050 923.11056 923.110.63 923.11075 923.11090 923.12550 923.12556 923.12563 923.12575 923.12590 923.125110 923.160110 923.160125 HDPE long eccentric reducer 160/110 160/125 200/110 200/125 200/160 250/200 315/200 315/250 5 5 1 1 1 1 1 1 923.160110L 923.160125L 923.200110L 923.200125L 923.200160L 923.250200L 923.315200L 923.315250L 10 10 902.90.90 902.110.90 10 10 929.90.90 929.110.90 HDPE short radius bend 90 110 HDPE ring seal socket 160 200 250 315 1 1 1 1 910p.160 910p.200 910p.250 910p.315 HDPE extended floor pan connector with 2 seals 110 10 993.110D HDPE WC bend with cap 90 110 8 Terrain Fittings Fittings Size mm Pack Code Quantity Size mm Pack Code Quantity HDPE WC bend for hanging pan with seal and cap HDPE double WC pan connector with 1 lip seals and caps 90/90 110/110 90/110 110/110 10 10 999.90.90 999.110.90 5 5 929.90110.90D 929.110.90D HDPE bend for wall hung pan with 1 lip seal and cap, left HDPE WC pan connector - white 90 110 10 10 925.90w 925.110w 110/110 90/90 110/90 5 5 5 949.110L 949.90L 949.11090L HDPE bend for wall hung pan with 1 lip seal and cap, right HDPE straight WC pan connector with seal and cap 90/100 90/100 10 10 999.90100.00 998.90100.00 110/110 90/90 110/90 5 5 5 949.110R 949.90R 949.11090R 5 5 949.110D 949.11090D HDPE WC pan connectors 110/110 110/90 HDPE long WC pan connector with seal 90 (length 200mm) 90 (length 300mm) 10 10 925L.90 925XL.90 HDPE trap with seal and cap HDPE connector for wall hung pan with seal & white covering 90/44 110/44 10 10 110 110 (45° tail) 110 (90° tail) 5 5 5 9631.110.0 9631.110.45 9631.110.90 1 1 908.110 908.160 925.9044 925.11044 HDPE ventilation branch 110 160 HDPE WC connector for wall hung pan with seal & white covering 90 110 9 10 10 925.90 925.110 HDPE Fittings Fittings Size mm Pack Code Quantity Size mm Pack Code Quantity HDPE adaptor - cast iron, steel, asbestos cement pipes HDPE trap - horizontal inlet and outlet 50/60 50/73 50/80 50/90 50/100 56/60 56/73 56/80 56/90 56/100 63/73 63/80 63/90 75/80 75/90 75/100 90/110 110/125 110/140 125/150 40/40 40/50 40/56 50/50 50/56 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 926.5060 926.5073 926.5080 926.5090 926.50100 926.5660 926.5673 926.5680 926.5690 926.56100 926.6373 926.6380 926.6390 926.7580 926.7590 926.75100 926.90110 926.110125 926.110140 926.125150 10 10 10 10 10 945.4040 945.4050 945.4056 945.5050 945.5056 HDPE washing machine connector 50 20 933.50 HDPE universal trap, vertical inlet and horizontal outlet 63 75 90 110 1 1 1 1 931.63 931.75 931.90 931.110 HDPE fitting with nut - brass 40mm/1¼” 40mm/1½” 50mm/1¼” 50mm/1½” 40 40 40 40 918.40.125B 918.40.15B 918.40.125EB 918.50.15B HDPE fitting with nut - plastic HDPE trap, vertical inlet and horizontal outlet 40/40 40/50 40/56 50/50 50/56 10 10 10 10 10 931.4040 931.4050 931.4056 931.5050 931.5056 32mm/1¼” 40mm/1¼” 40mm/1½” 50mm/1¼” 50mm/1½” 40 40 40 40 40 918.32.125 918.40.125 918.40.15 918.50.125 918.50.15 HDPE extended fitting with nut - brass HDPE trap - vertical inlet and outlet 40/40 40/50 40/56 50/50 50/56 10 10 10 10 10 Trap adaptors are available 40mm to 1¼” and 50mm to 1½” 40mm/1¼” 40mm/1½” 50mm/1¼” 50mm/1½” 20 20 20 20 918.40.125EB 918.40.15EB 918.50.125EB 918.50.15EB 932.4040 932.4050 932.4056 932.5050 932.5056 10 Terrain Fittings Fittings Size mm Pack Code Quantity Size mm Pack Code Quantity HDPE extended fitting with nut - plastic HDPE seal for WC sleeves and extended bends 40mm/1¼” 40mm/1½” 50mm/1¼” 50mm/1½” 115 20 20 20 20 918.40.125E 918.40.15E 918.50.125E 918.50.15E 20 9129.125 1 1 1 1 1 1 1 1 1 1 1 9725.50 9725.56 9725.63 9725.75 9725.90 9725.110 9725.125 9725.160 9725.200 9725.250 9725.315 HDPE fire stop HDPE bend with nut - *brass •plastic 40mm/1¼”* 40mm/1½”* 40mm/1¼”• 40mm/1½”• 20 20 20 20 918.40.125.90B 918.40.15.90B 918.40.125.90 918.40.15.90 HDPE reducing bend with nut - *brass •plastic 40/50mm/1¼”* 40/50mm/1½”* 40/50mm/1¼”• 40/50mm/1½”• 20 20 20 20 918.4050.125.90B 918.4050.15.90B 918.4050.125.90 918.4050.15.90 50 56 63 75 90 110 125 160 200 250 315 HDPE protective cap for socket 56 63 75 90 110 125 160 200 40 30 30 30 30 20 10 1 9130.56 9130.50 9130.75 9130.63 9130.110 9130.125 9130.160 9130.200 HDPE 1 lip seal for sockets HDPE end with internal threading, reinforced with steel ring 40mm x ½” 40mm x ¾” 40mm x 1” 50mm x ½” 50mm x ¾” 50mm x 1” 50mm x 1¼” 50mm x 1½” 56mm x 2” 63mm x 2” 75mm x 2½” 10 10 10 10 10 10 10 10 10 10 10 916.40.05 916.40.075 916.40.1 916.50.05 916.50.075 916.50.1 916.50.125 916.50.15 916.56.2 916.63.2 916.75.25 HDPE end with external threading, reinforced with steel ring 50mm x 1¼” 50mm x 1½” 56mm x 2” 63mm x 2” 75mm x 2½” 10 10 10 10 10 917.50.125 917.50.15 917.56.2 917.63.2 917.75.25 100 90 110 125 160 200 250 315 20 20 20 20 20 20 1 1 927.100.908 927.90.908 927.110.908 927.125.908 927.160.908 927.200.908 927.250.908 927.315.908 20 20 20 20 20 20 20 20 20 9116.40 9116.50 9116.56 9116.63 9116.75 9116.90 9116.110 9116.125 9116.160 HDPE O ring for sockets 40 50 56 63 75 90 110 125 160 HDPE O ring 100m for adaptors - PVC HDPE threaded fitting with brass nipple 40mm/½” x 15 40mm/¾” x 18 50mm/½” x 15 50mm/¾” x 18 50mm1” x 22 11 10 10 10 10 10 936.40.05N 936.40.075N 936.50.05N 936.50.075N 936.50.1N 100 20 9113.908 HDPE Fittings Fittings Size mm Pack Code Quantity HDPE seal for expansion sockets 40 50 56 63 75 90 110 125 160 200 20 20 20 20 20 20 20 20 20 1 911.40.908 911.50.908 911.56.908 911.63.908 911.75.908 911.90.908 911.110.908 911.125.908 911.160.908 911.200.908 50 9144.40 Adjustable pipe bracket M10 50mm x M10 56mm x M10 63mm x M10 75mm x M10 90mm x M10 110mm x M10 125mm x M10 160mm x M10 50 50 50 25 25 25 25 25 25 9148.25 50 50 50 50 25 25 25 25 25 9142.40 9142.50 9142.56 9142.63 9142.75 9142.90 9142.110 9142.125 9142.160 50 50 50 50 25 25 25 25 25 9143.40 9143.50 9143.56 9143.63 9143.75 9143.90 9143.110 9143.125 9143.160 50 50 50 50 25 25 25 25 25 9145.40 9145.50 9145.56 9145.63 9145.75 9145.90 9145.110 9145.125 9145.160 25 25 25 9146.90 9146.110 9146.160 25 25 9104.40 9104.30 HDPE M10 anchor bracket 40 50 56 63 75 90 110 125 160 40 50 56 63 75 90 110 125 160 HDPE pipe clip 10 10 10 9144.200 9144.250 9144.315 1 9147 Threaded bar M10 x 1 metre G1” HDPE ½” bracket 9144.50 9144.56 9144.63 9144.75 9144.90 9144.110 9144.125 9144.160 Adjustable pipe bracket G1” 200mm x 1” 250mm x 1” 315mm x 1” Pack Code Quantity Galvanised steel flange 1” HDPE M10 bracket 40mm Size mm 40 50 56 63 75 90 110 125 160 Acoustic pipe bracket 90 110 160 Mounting plate M10 G ½” 100 100 9148.10 9148.19 10 10 918.40.908 918.40.918 Rubber insert strip 40mm x 10m 30mm x 50m HDPE rubber flat seal 40mm x ¼” 40mm x ½” Anti vibration insert 30mm x 30 (58mm-314mm) 9105.30 12 Terrain Electrofusion Coupling Electrofusion Coupling Description Available in sizes 40 - 315mm Connection properties: Quantity HDPE electrofusion welding machine 40 to 160mm 40 to 160mm 1 HDN464001 1 HDC464222 Cable and plugs 230 Volt Non-removable Product Code Universal electrofusion machine with scraper 40 to 315mm Tension resistant 230 Volt 1 HDN464333 110 Volt 1 HDN464005 1 HDC465333 Use HDPE pipe scraper This form of jointing is suitable for on-site Pipe cutter welding, additional installations, repair work 40 to 63mm 1 HDC458001 and modifications. 50 to 140mm 1 HDC458003 Spare blades The pressure required for welding is obtained 40 to 63mm 1 HDC459001 from the shrinking effect of the sleeve upon 50 to 140mm 1 HDC459003 1 (12Pcs.) HDC474001 1 (12Pcs.) HDC473001 heating and is distributed equally over the entire weld. This shrinkage has a compensating effect on pipe HDPE pencils HDPE knife diameter measurement tolerances. By removing the central stop ring, the electrical sleeves can be made to slide to enable system modifications and repairs. The electrical resistance wires will not corrode as they are protected Expansion Socket with Ring Seal by HDPE after welding. Available in sizes 40 - 315mm Connection properties: Non-removable Non-tension resistant Pipe scraper Electrofusion welding machine cm 3,5 10 cm 20°C Deoxidise pipe Cut the pipe squarely, dry, clean and scrape the welding surfaces. The surface must remain clean and dry during the whole welding process, therefore do not touch with your hands. The length of pipe to be scraped with diameters ranging from 40 - 160mm is 35mm. The length of pipe to be scraped with diameters 200, 250 and 300mm is 100mm. 13 Insert pipe or fitting into sleeve coupling. If the stop ring in the sleeve needs to be removed, mark the depth at 30mm. Horizontal assembly (e.g. at an ambient temperature of 20°C). Use Expansion sockets can be used in underground pipe systems as normal push-fit fittings but must be provided on vertical stacks running from floor to floor and for rainwater pipes both inside and outside the building. HDPE Expansion Socket with Ring Seal Expansion Socket with Ring Seal Description Quantity Product Code Pipe cutter 40 to 63mm 1 HDC458001 50 to 140mm 1 HDC458003 40 to 63mm 1 HDC459001 50 to 140mm 1 HDC459003 1 HDC460003 1 HDC460111 1 (12Pcs.) HDC474001 1 (12Pcs.) HDC473001 Spare blades Bevelling tool 40 to 250mm The pipe should be chamfered to approximately 15° and lubricated with suitable Terrain product. Do not use oil or grease which can damage the rubber seal. Spare blades 40 to 250mm HDPE pencils HDPE knife Lubricant Please refer to page 19 Pipe cutter Bevelling tool Butt welding Butt welding Description Suitable for diameters 40 - 315mm Connection properties: Non-removable Quantity Product Code welding plate with steel box 40 to 160mm 1 HDC450001 110 to 300mm 1 HDC450003 Portable welding machine Practica 160 Tension resistant 40 to 160mm 1 HDN466003 1 HDN477515 1 HDN477500 Spare blade Practica 160 Practica 160 Driving belt Practica 160 Portable welding machine standard 40 to 160mm 1 HDN468160 1 HDN477515 1 HDN477500 Spare blade Standard Driving belt Practica 160 Butt welding can be used in all Standard cases where workshop or on Portable welding machine super Welding up to Ø63mm site prefabrication is available. 75 to 250mm 1 HDN470001 1 HDN477525 1 HDN477520 1 HDN470005 1 HDN477535 1 HDN477540 1 (12Pcs.) HDC473001 Spare blade Butt Welding requires minimal Super space. This form of jointing is Driving belt safe, strong, economical and Super quick. Welding machine Maxi 90 to 315mm Spare blade Maxi Driving belt Maxi HDPE knife Machine welding for all diameters 33 Plumbing and Drainage Solutions for International Markets Polypipe Gulf Polypipe Terrain Dubai Airport Free Zone (DAFZA) New Hythe Business Park Building 4EA College Road Office 213 Aylesford Dubai Kent United Arab Emirates ME20 7PJ United Kingdom Tel: +971 46091371 Tel: +44 1622 795200 Fax: +971 46091372 Fax: +44 1622 716796 polypipegulf.fze@polypipe.com international@polypipe.com www.terraindrainage.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 15 X Press Private : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments Creator : QuarkXPress(R) 7.5 Modify Date : 2009:07:22 12:27:34 Create Date : 2009:07:22 12:27:34 Producer : QuarkXPress(R) 7.5 Title : Layout 1EXIF Metadata provided by EXIF.tools