Uni Sketch Manual

User Manual:

Open the PDF directly: View PDF .
Page Count: 52

Scroll down to view the document on your mobile browser.

Installation and Operation Manual
Contents
Getting Started
Firmware Updater
Connecting SKAARHOJ Controller with Clients
- Troubleshooting
Setting IP for non UniSketch Based Controllers
Network Recommendations
- Facts
- Power over Ethernet (PoE) Specifications
- Troubleshooting
- Connection Stability and NDI
- Network Guidelines
- Additional Resources
- Multicast Data on Network
- Recommend Managed Network Switches for NDI Network
- Static IP Address or DHCP
Device Cores
- vMix Device Core
Firmware Updater Application
- Load Firmware from File
- Port selection on Windows
- IP Settings
- Serial Monitor
- Commands in the Serial Monitor
- List of Commands
- Error Occurred during Firmware Upload
- The Connected Controller is not Fully Registered yet
- The Controller Appears Bricked/Non Responsive
cores.skaarhoj.com
- Controller Configuration
- Device Cores
- Manage Configurations
- Manage Media
- Firmware Overview
- Device Core Options
Back Connections and Config Mode
- Status LED Overview
- Connection Troubleshooting
Configuration Mode/Accessing Web Interface
- Enter configuration mode
- Access to web interface if SKAARHOJ controller is connected via network router
- Access via the Firmware Application
- DHCP
- Web Interface Troubleshooting
UniSketch OS Explained
Web Interface
Device Settings
Hardware Interface Components (HWC)
- Graphical Displays
Devices
Multiple Actions
Shift
States
Copy / Paste
Presets
Troubleshooting
Contact Support
Hardware Notes:
DB-25 Connector Configuration for GPI
DB-9 Connector Configuration for RCP units (EXT I/O)
Pinout for Tally Box
Other Notes:
- Triggering Actions from Binary Inputs
- Connection between RCP and ETH-SDI Link using ETH2SDI Firmware
- Connection between RCP and WIFI-B4 Link

Navigation menu