Discovery Kit With STM32F429ZI MCU User Manual

• Figure 1. STM32F429 Discovery board
• 1 Features
• 2 Product marking
• 3 Ordering information
  • Table 1. List of the order codes
• 4 Conventions
  • Table 2. ON/OFF conventions
• 5 Quick start
  • 5.1 Getting started
  • 5.2 System requirements
  • 5.3 Development toolchains supporting the STM32F429 Discovery kit
• 6 Hardware layout
  • Figure 2. Hardware block diagram
  • 6.1 STM32F429 Discovery board layout
    • Figure 3. Top layout
    • Figure 4. Bottom layout
  • 6.2 Mechanical drawing
    • Figure 5. STM32F429 Discovery board mechanical drawing
  • 6.3 Embedded ST-LINK/V2 (or V2-B)
    • Table 3. Jumper states
    • 6.3.1 Drivers
      • Figure 6. Updating the list of drivers in Device Manager
    • 6.3.2 ST-LINK/V2 (or V2-B) firmware upgrade
    • 6.3.3 VCP configuration
    • 6.3.4 Using ST-LINK/V2 (or V2-B) to program/debug the STM32F429ZIT6 on board
      • Figure 7. STM32F429 Discovery board connections
    • 6.3.5 Using ST-LINK/V2 (or V2-B) to program/debug an external STM32 application
      • Table 4. Debug connector CN2 (SWD)
      • Figure 8. ST-LINK/V2 connections
  • 6.4 Power supply and power selection
  • 6.5 LEDs
  • 6.6 Push-buttons
  • 6.7 USB OTG supported
  • 6.8 Gyroscope MEMS (ST-MEMS L3GD20)
  • 6.9 TFT LCD (Thin-film-transistor liquid-crystal display)
  • 6.10 64-Mbit SDRAM (1Mbit x 16-bit x 4-bank)
  • 6.11 JP3 (Idd)
  • 6.12 OSC clock
    • 6.12.1 OSC clock supply
    • 6.12.2 OSC 32 KHz clock supply
  • 6.13 Solder bridges
    • Table 5. Solder bridges
  • 6.14 Extension connectors
    • Table 6. STM32 pin description versus board functions
• 7 Electrical schematics
  • Figure 9. STM32F429I-DISC1 Discovery board
  • Figure 10. ST-LINK/V2 (SWD only)
  • Figure 11. USB OTG FS
  • Figure 12. 64-Mbit SDRAM
  • Figure 13. STM32F429ZIT6 MCU
  • Figure 14. Peripherals
  • Figure 15. LCD 2.4
• 8 Revision history
  • Table 7. Document revision history