User Manual TEF6686
User Manual:
Open the PDF directly: View PDF
Page Count: 101 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- 1. Introduction
- 2. Control interface
- 3. Write commands
- 3.1 FM / AM cmd 1 Tune_To
- 3.2 FM cmd 2 Set_Tune_Options
- 3.3 FM / AM cmd 10 Set_Bandwidth
- 3.4 FM / AM cmd 11 Set_RFAGC
- 3.5 AM cmd 12 Set_Antenna
- 3.6 AM cmd 14 Set_CoChannelDet
- 3.7 FM cmd 20 Set_MphSuppression
- 3.8 FM cmd 22 Set_ChannelEqualizer
- 3.9 FM cmd 23 Set_NoiseBlanker
- 3.10 FM cmd 24 Set_NoiseBlanker_Options
- 3.11 AM cmd 23 Set_NoiseBlanker
- 3.12 AM cmd 24 Set_NoiseBlanker_Audio
- 3.13 FM / AM cmd 30 Set_DigitalRadio
- 3.14 FM cmd 31 Set_Deemphasis
- 3.15 FM cmd 32 Set_StereoImprovement
- 3.16 FM / AM cmd 38 Set_LevelStep
- 3.17 FM / AM cmd 39 Set_LevelOffset
- 3.18 FM / AM cmd 40 … 45 Set_Softmute
- 3.19 FM / AM cmd 50 … 59 Set_Highcut
- 3.20 FM cmd 60 … 66 Set_Stereo
- 3.21 FM cmd 70 … 76 Set_StHiBlend
- 3.22 FM / AM cmd 80 Set_Scaler
- 3.23 FM cmd 81 Set_RDS
- 3.24 FM / AM cmd 82 Set_QualityStatus
- 3.25 FM / AM cmd 83 Set_DR_Blend
- 3.26 FM / AM cmd 84 Set_DR_Options
- 3.27 FM / AM cmd 85 Set_Specials
- 3.28 FM cmd 86 Set_Bandwidth_Options
- 3.29 FM cmd 90 … 92 Set_StereoBandBlend
- 3.30 AUDIO cmd 10 Set_Volume
- 3.31 AUDIO cmd 11 Set_Mute
- 3.32 AUDIO cmd 12 Set_Input
- 3.33 AUDIO cmd 13 Set_Output_Source
- 3.34 AUDIO cmd 21 Set_Ana_Out
- 3.35 AUDIO cmd 22 Set_Dig_IO
- 3.36 AUDIO cmd 23 Set_Input_Scaler
- 3.37 AUDIO cmd 24 Set_WaveGen
- 3.38 APPL cmd 1 Set_OperationMode
- 3.39 APPL cmd 3 Set_GPIO
- 3.40 Idle state - APPL cmd 4 Set_ReferenceClock
- 3.41 Idle state - APPL cmd 5 Activate
- 4. Read commands
- 4.1 FM / AM cmd 128 / 129 Get_Quality
- 4.2 FM cmd 130 / 131 Get_RDS
- 4.3 FM / AM cmd 132 Get_AGC
- 4.4 FM / AM cmd 133 Get_Signal_Status
- 4.5 FM / AM cmd 134 Get_Processing_Status
- 4.6 FM / AM cmd 135 Get_Interface_Status
- 4.7 APPL cmd 128 Get_Operation_Status
- 4.8 APPL cmd 129 Get_GPIO_Status
- 4.9 APPL cmd 130 Get_Identification
- 4.10 APPL cmd 131 Get_LastWrite
- 5. I²C bus protocol
- 6. Device start-up
- 7. Overview of available commands
- 8. Legal information
- 9. List of figures
- 10. List of tables
- 11. Contents