Préface Vario Track Solar Charger Manual
User Manual: Home
Open the PDF directly: View PDF
Page Count: 52
- 1 Introduction
- 2 General information
- 3 Mounting and installation
- 4 wiring
- 5 Power-up of the Equipment
- 6 Display system
- 7 Battery charging process
- 8 Configuring the VarioTrack(s)
- 8.1 Configuring the equipment by means of the internal DIP switches
- 8.2 Displaying the equipment status using the remote control RCC-02/-03
- 8.3 Configuring the VarioTrack using the remote control RCC-02/03
- 8.4 Description of the VarioTrack parameters
- 8.4.1 Convention
- 8.4.2 Parameter access level
- 8.4.3 Organisation of the configuration menu
- 8.4.4 Basic menu {10000} (menu)
- 8.4.4.1 System voltage {10001} (Automatic)
- 8.4.4.2 Synchronization of a battery cycle with an Xtender {10037} (yes)
- 8.4.4.3 Battery floating voltage {10005} (13.6V/27.2V/54.4V)
- 8.4.4.4 Absorption voltage {10009} (14.4V/28.8V/57.6V)
- 8.4.4.5 Equalization authorized {10017} (no)
- 8.4.4.6 Equalization voltage {10021} (15.6V/31.2V/62.4V)
- 8.4.4.7 Restoring the default parameters {10056} (signal)
- 8.4.5 Management and battery cycle {10003} (menu)
- 8.4.6 Floating phase {10004} (menu)
- 8.4.7 Absorption phase {10007} (menu)
- 8.4.7.1 Absorption phase allowed {10008} (yes)
- 8.4.7.2 Absorption voltage {10009} (14.4V/28.8V/57.6V)
- 8.4.7.3 Force absorption phase {10010} (signal)
- 8.4.7.4 Absorption duration {10011} (120min)
- 8.4.7.5 End of the absorption triggered by the current {10012} (no)
- 8.4.7.6 Current threshold to end absorption phase {10013} (10A)
- 8.4.8 Equalization phase {10016} (menu)
- 8.4.8.1 Equalization authorized {10017} (no)
- 8.4.8.2 Forcing an equalization {10018} (signal)
- 8.4.8.3 Battery equalization voltage {10021} (2.6V/element) (15.6V/31.2V/62.4V)
- 8.4.8.4 Battery equalization current {10020} (80A)
- 8.4.8.5 Equalization period {10022} (30min)
- 8.4.8.6 Equalization at a fixed interval {10024} (yes)
- 8.4.8.7 Days between the equalizations {10025} (26 days)
- 8.4.8.8 End of the equalization triggered by the current {10026} (no)
- 8.4.8.9 Final current of the equalization phase {10027} (no)
- 8.4.8.10 Equalization before absorption phase {10019} (yes)
- 8.4.9 New cycle {10028} (Menu)
- 8.4.9.1 Forcing a new cycle {10029} (signal)
- 8.4.9.2 Conditions for a new cycle
- 8.4.9.3 Maximum limit of the cycle repetition {10034} (Yes)
- 8.4.9.4 Minimum interval between cycles {10035} (1h)
- 8.4.9.5 Correction coefficient for battery temperature {10045} (-3mV/ C/cell)
- 8.4.9.6 Battery charging current {10002} (80A)*
- 8.4.10 System {10038} (menu)
- 8.4.11 Auxiliary contacts 1 {10088} and 2 {10142} (menu)
- 8.4.12 Simple functions
- 8.4.12.1 Switching mode {10089} {10143} (Automatic)
- 8.4.12.2 Combination of events mode {10090} {10144} (OU)
- 8.4.12.3 Contacts activated in night mode {10092} {10146} (menu)
- 8.4.12.4 Contacts activated by an event {10096} {10150} (menu)
- VarioTrack OFF {10091} {10145} (no)
- Low battery voltage {10097} {10151} (no)
- Battery overvoltage {10098} {10152} (no)
- Earth fault {10099} {10153} (no)
- PV error (48h without load) {10100} {10154} (no)
- Loss of synchronisation {10101} {10155} (no)
- Over temperature {10102} {10156} (no)
- Battery charging in absorption phase {10105} {10159} (no)
- Battery charging in equalization phase {10106} {10160} (no)
- Battery charging in floating phase {10107} {10161} (no)
- Battery charging in reduced floating phase {10108} {10162} (no)
- Battery charging in periodic absorption phase {10109} {10163} (no)
- 8.4.12.5 Contacts activated by the battery voltage {10110} {10164} (menu)
- 8.4.12.6 Contacts activated according to the battery temperature {10123} {10177} (menu)
- 8.4.12.7 Contacts activated on the battery's state of charge (SOC) {10128} {10182} (only available in the presence of a BSP) (menu)
- 8.4.12.8 Reset of the programming {10141} {10195} (signal)
- 9 Accessories
- 10 Equipments compatible with the VarioTracks
- 11 Wiring examples
- 12 Maintenance of the installation
- 13 Product recycling
- 14 EC declaration of conformity
- 15 parameter list
- 16 parameter list for the auxiliary relays
- 17 Technical data
- 18 Index of parameters
- 19 Notes