WSC 1204 Submittal Sheet GIT1
User Manual: WSC-1204 Submittal-sheet GIT1 of /wp-content/uploads
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
The world’s best-selling electric floor heating brand ™ GIT-1 GUTTER ICE SENSOR SUBMITTAL SHEET WSC-1204 PRODUCT CODE GIT-1 PRODUCT DESCRIPTION An automatic control system for gutters and downspouts, employs one or more GIT–1 Gutter Ice Sensors and an APS–3C Control Panel. Heaters operate only if moisture occurs at temperatures below 38°F(3.3°C), thus saving energy and ensuring reliable ice melting. Since the GIT–1 mounts in gutters and downspouts it senses actual environmental conditions. This improves sensing accuracy. Solid state moisture and temperature sensors provide the sensitivity required for effective automatic control. Ice bridging occurs if incomplete melting occurs near the heater or sensor leaving an air space. The air insulates thus preventing effective heater and sensor operation. The GIT–1’s unique microcontroller design frees its moisture sensor from ice bridging. Additional features prevent heater operation under conditions favorable to heater ice tunneling. Low Voltage operation simplifies installation. Sensors can be located up to 2,000’ (609.6m) away form the control panel. ADVANTAGES • • • Minimum snow melting costs No supervision required Simple installation SPECIFICATION Area of Use Gutters Heater hold-on timer None Activation Temperature 38˚F (3.37˚C) Circuit type NEC Class 2 Supply voltage 24 VAC (Supplied by panel) Bus-wire type 3-wire jacketed cable Up to 2,000’ (609m) using 12 AWG 3-wire jacketed Lead Length cable Up to 500’ (152m) using 18 AWG 3-wire jacketed cable Operating temperature −40°F to 160°F (−40°C to 71°C) Storage temperature −50°F to 180°F (−45°C to 82°C) WARMUP INC. USA: us@warmup.com Tel.: 1-888-927-6333 www.warmup.com CANADA: ca@warmup.com Tel.: 1-888-592-7687 www.warmup.ca The world’s best-selling electric floor heating brand ™ The world’s best-selling electric floor heating brand ™ GIT-1 GUTTER ICE SENSOR SUBMITTAL SHEET WSC-1204 INSTALLATION For the installation, choose an unobstructed, elevated location exposed to snowfall. Gutters: Position sensor within 1/4" (6.4mm) of gutter bottom with moisture sensing grid facing downstream (ambient air temperature sensor facing up stream). Sensor may be fastened to the fascia using the mounting clamps and gasketed screws (not furnished). Downspouts: Fold cable back parallel to sensor body and secure with mounting clamps. Suspend sensor in downspout with moisture sensing grid facing up (ambient air temperature sensor facing down). C WARMUP INC. USA: us@warmup.com Tel.: 1-888-927-6333 www.warmup.com CANADA: ca@warmup.com Tel.: 1-888-592-7687 www.warmup.ca The world’s best-selling electric floor heating brand ™ The world’s best-selling electric floor heating brand ™ GIT-1 GUTTER ICE SENSOR SUBMITTAL SHEET WSC-1204 PRODUCT LISTING Code Description Amp (A) Plug-and-Play outdoor controller with 4 x 50A/3pole contactors allowing for a total load of 600A with a COMMBOX-600 minimum power supply of 60A. Comes in LED enclosure with GFEP protection, built-in Digital controller and 600A ground temperature sensor. AIRsense APS-3C SIT-6E CIT-1 Outdoor moisture and temperature sensor, supplied with mounting bracket. N/A Snow Melting Controller with incl. slab sensor and built-in dry contacts for EMC and remote control. Rated 208-277V single phase. Surface-mounted snow and ice sensor used with APS series panels. Detects moisture and temperatures and triggers below 38F for energy-efficient operation. Easy mounting in slabs with multiple conduit connections. The maintenance free CIT sensors activate snow melting systems below 38oF and provide automatic triggering of APS series panels. Mast or roof mounting. N/A N/A N/A GIT-1 GIT-1 gutter sensor for APS-3C panel. Measures moisture & temperature. Active below 38F. N/A GF-PRO Automatic Controller with GFEP and GF Load 30A WARRANTY & MAINTENANCE When installed according to the installation manual, the GIT-1 is covered with Warmup’s 2-year manufacturer warranty. TECHNICAL SUPPORT Warmup is available 24/7/365 at (888) 927-6333. For quotes, layouts and specific technical information, contact us at: Warmup USA 52 Federal Rd #1F, Danbury, CT 06810 (888) 927-6333 us@warmup.com Warmup CANADA 374 Wellington St W, Toronto, ON M5V 1E3 (905) 990-2075 ca@warmup.com RELATED PRODUCTS • • • • CIT-1 Aerial Snow Sensor - see WSC-1104 SIT-6E Pavement Mounted Snow Sensor - see WSC-1304 APS-3C Snow Melting and Gutter De-icing - see WSC-1404 GF-PRO Snow Switch Model - see WSC-1504 WARMUP INC. USA: us@warmup.com Tel.: 1-888-927-6333 www.warmup.com CANADA: ca@warmup.com Tel.: 1-888-592-7687 www.warmup.ca The world’s best-selling electric floor heating brand ™
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2016:04:13 11:16:35-04:00 Metadata Date : 2016:04:13 11:16:36-04:00 Modify Date : 2016:04:13 11:16:36-04:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:db9c3d95-73d1-4175-af08-61219e392ffe Original Document ID : xmp.did:77C699FCF018E5118662C7CDAFDC1822 Document ID : xmp.id:1D9C9EB28A01E611B2C2DE73588330F0 Rendition Class : proof:pdf History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2016:04:13 11:16:35-04:00 Derived From Instance ID : xmp.iid:1C9C9EB28A01E611B2C2DE73588330F0 Derived From Document ID : xmp.did:77C699FCF018E5118662C7CDAFDC1822 Derived From Original Document ID: xmp.did:77C699FCF018E5118662C7CDAFDC1822 Derived From Rendition Class : default Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 3 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools