Copper Pak Water Heater Brochure
User Manual: Copper-Pak
Open the PDF directly: View PDF .
Page Count: 52
Download | |
Open PDF In Browser | View PDF |
Water Heater Product Line Brochure Lochinvar Corporation 300 Maddox Simpson Pkwy Lebanon, TN 37090 615-889-8900 / Fax: 615-547-1000 www.Lochinvar.com Contents The Innovator In Water Heating Technology From the tiny 2 gallon Jr. Electric to the innovative Intelli-Fin, Lochinvar water heaters are noted for their range of features and application flexibility. Collectively, they represent the most complete product line in the industry, from a company with a long history of innovation and a reputation for excellence. You’ll find there’s a Lochinvar product for any application imaginable— from standard residential units to the advanced Copper-Fin II with proportional firing. And with selection, comes opportunity. In fact, the diversity and performance of our product line is surpassed only by its quality—in design, construction, and training. Lochinvar quality is reinforced by our world class manufacturing plant, commitment to research and development and unparalleled industry training available at Lochinvar University. Quality, efficiency, features, service, and selection. For more than 85 years, these have been the hallmarks of Lochinvar products. Lochinvar... the innovator in water heating technology. 1 ARMOR® 3 SHIELD® 5 Intelli-Fin® 7 Power-Fin® 9 Copper-Fin II® 11 Copper-Fin 13 Efficiency+ 14 Efficiency Pac® 15 Copper-Fin® “Better Idea” 17 Copper-Pak® 18 Charger 19 Super Charger 20 TurboCharger® 21 Charger Power DV 22 Custom Hi-Power® 23 Standard Hi-Power® 24 Compact ASME Hi-Power® 25 Light Duty Commercial 26 Explosion-Resistant 27 Space-Saver Electric Boosters This ingot means a product has a NOx rating which exceeds the requirements of the South Coast Air Quality Management District and Texas National Resource Conservation Commission. 28 Round Jacketed Storage Tanks 29 Square Jacketed Storage Tanks 30 Bare Storage Tanks 31 Hot Water Generators 33 Squire Indirect Water Heater 34 Energy Saver Indirect This ingot means the Multi-Stack Frame is available for use with that product. See page 45 & 46 for details. 35 Residential Electric 36 Junior Electric 37 Residential Gas 38 Power-Vented FVIR 39 Power-Vented This catalog is designed to provide a convenient, condensed overview of the entire Lochinvar water heater line. For a complete list of features, specifications and technical data on a particular product, see your manufacturer’s representative or contact Lochinvar. Every Lochinvar product is designed and built to meet or exceed the fuel efficiency and safety standards of one or more of these agencies, wherever applicable. 40 Power Direct Vent 41 Balanced Flue 42 Double Duty 43 Manufactured Home 44 Solar 45 Multi-Stack 1 Armor®150,000 to 800,000 Btu/hr Models The Intelligent Approach to Water Heating There are several tank-type commercial water heaters on the market with thermal efficiencies of 95% or higher. They all promise tremendous savings on operating costs compared to standard-efficiency units, but none of them truly measures up to the Lochinvar ARMORTM. ARMOR is a fully condensing commercial gas water heater. Available in eight models with inputs ranging from 150,000 to 800,000 Btu/hr, the ARMOR achieves thermal efficiencies up to 98%. ARMOR delivers long-lasting life-cycle efficiency surpassing any commercial unit in its class. When you look beyond the numbers you’ll discover the many ways that ARMOR technology is in a class by itself! Fully Modulating with 5:1 Turndown ARMOR features advanced Negative Regulation (Neg/Reg) sealed combustion technology, permitting fan speed to constantly adjust the volume of fuel and air entering the burner. This ensures that ARMOR can safely and reliably operate with supply gas pressure as low as 4 inches water column. ARMOR is equipped with fully modulating combustion with 5:1 turndown. This means ARMOR can fire as low as 20% of maximum input when water heating demand is lowest, and increase the firing rate up to 100% as demand increases. The result is better overall efficiency and less cycling, compared to all other tank-type units which are “on-off,” which means they can only fire at 100% of maximum input. Stainless Steel Condensing Heat Exchanger The ARMOR’s stainless steel heat exchanger is built to ASME Section IV requirements. Its design provides superior resistance to corrosion caused by condensation from low entering water temperatures. Traditional commercial water heaters will fail early with low entering water temperatures; however, with the ARMOR the lower the supply water temperature the more efficiently it performs throughout the life of the heater. The Ultimate Water Heater Operating Control • Easy to use – makes setup and service a breeze • 2-line 16-character lcd display of setup, system status and diagnostic data in words, not codes • Water heater pump control: > Pump delay with freeze protection > Pump exercise • High-voltage terminal strip: 2-line 16-character > 110 Vac input to water heater LCD display of setup, > 110 Vac output to pump system status and • Low-voltage terminal strip with diagnostic data in • 22 points of connection words, not codes • Built-in cascading sequencer controls up to 8 Armor units without the added cost of a separate third-party sequencer • Interface for optional smart system PC software for advanced setup and diagnostics 7 Venting Options - Easy, Flexible Installation and Service Room Air Vertical Room Air Sidewall Direct Vent Vertical Vertical w/Sidewall Air Direct Vent Vertical* D Direct Vent Sidewall* *Optional Concentric Vent Kit Sold Separately Direct Vent Sidewall 2 Armor®150,000 to 800,000 Btu/hr Models Dimensions & Specifications ELECTRICAL CONNECTIONS Models 150-199 K AIR INLET OUTLET J FLUE 30 1/4" GAS INLET 29 3/4" A DRAIN 3/4" NPT I H 15 1/2" 11 1/4" 6 1/2" 3 3/4" G F E D 7 3/4" 15 1/2" CONDENSATE DRAIN 1/4" - 1 1/4" ADJUSTABLE FRONT C ELECTRICAL CONNECTIONS Models 285-800 J GAS K AIR INLET INLET 39 1/2" 39" OUTLET A FLUE I H DRAIN 3/4" NPT 18 3/4" 13 3/4" 9" 3 3/4" 8" G CONDENSATE DRAIN F D 15 1/2" 1/4" - 1 1/4" ADJUSTABLE E Btu/hr GPH @ Input 100° Rise AWN150PM AWN199PM AWN285PM AWN399PM AWN500PM AWN600PM AWN700PM AWN800PM 150,000 199,999 285,000 399,999 500,000 600,000 700,000 800,000 174 235 339 475 594 713 832 950 A 33-1/4” 33-1/4” 42-1/2” 42-1/2” 42-1/2” 42-1/2” 42-1/2” 42-1/2” C 18” 22-1/4” 19-3/4” 27” 31-1/4” 36-1/4” 40-1/4” 45-1/4” D E 12-1/4” 16-1/2” 12-3/4” 21” 21” 25” 29” 33-1/4” FRONT C BACK Model Number F 11-1/2” 10” 15-3/4” 14-1/4” 13-1/2” 6” 20-3/4” 14” 25” 14” 21” 14” 23” 17” 23” 17” G 1-1/2” 5-1/4” 2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” H 21-1/4” 21-1/4” 34” 34” 35” 36” 36” 36” I 23” 23” 31” 34” 35” 32-3/4” 32-3/4” 32-3/4” J K 1-3/4” 12” 1-3/4” 16-1/4” 11-3/4” 4-1/4” 18-3/4” 2” 22” 5-3/4” 19-1/2” 5-1/2” 23-1/2” 3-1/4” 27-3/4” 3-1/4” Gas Conn. Water Conn. Air Inlet Vent Size Shipping Wt. (lbs.) 1/2” 1/2” 3/4” 1” 1” 1-1/2” 1-1/2” 1-1/2” 1-1/4” 1-1/4” 2” 2” 2” 2” 2” 2” 3” 3” 4” 4” 4” 4” 4” 4” 3” 3” 4” 4” 4” 4” 6” 6” 165 185 235 295 335 380 461 527 Standard Features Smart System Features Optional Equipment > Up to 98% Thermal Efficiency > Modulating Burner with 5:1 Turndown > Direct-Spark Ignition > Low NOx Operation > Sealed Combustion > Low Gas Pressure Operation > Vertical & Horizontal Direct-Vent > PVC, CPVC or SS Venting up to 100 Feet > PVC/CPVC Sidewall Vent Termination > Stainless Steel Heat Exchanger > All Welded Construction, Gasketless Design > 160 psi Working Pressure > ASME Construction (AW 285-800) > Natural to L.P. Conversion Kit > All Bronze Circulating Pump > On/Off Switch > Flow Switch > ASME Temperature & Pressure Relief Valve > Temperature & Pressure Gauge (AW 500-800) > Downstream Test Valves (AW 500-800) > Adjustable Leveling Legs > Tank Sensor > Manual Reset High Limit > Condensate Trap > Zero Clearances to Combustible Material > 5 Year Limited Warranty (See Warranty for Details) > 1 Year Parts Warranty (See Warranty for Details) > SMART SYSTEM Digital Operating Control > 2 line, 16 Character Display > Dual Level Password Security > Built in Cascading Sequencer for up to 8 Water Heaters > Building Management System Integration with 0-10 VDC Input > Low Water Flow Safety Control & Indication > Inlet & Outlet Temperature Sensors & Readout > Flue Temperature Sensor > Water Heater Pump Control > Pump Delay with Freeze Protection > Pump Exercise > Night Setback > Time Clock > Service Reminder > High Voltage Terminal Strip > 120 VAC / 60 Hertz / 1 Phase Power Supply > Pump Control Contacts > Low Voltage Terminal Strip > 24 VAC Auxiliary Device Relay > Auxiliary Proving Switch Contacts > Flow Switch Contacts > Alarm on Any Failure Contacts > Runtime Contacts > Tank Sensor Contacts > Cascade Contacts > 0-10 VDC BMS External Control Contact > Adjustable High Limit w/ Manual Reset > Alarm Bell > Condensate Neutralization Kit > High & Low Gas Pressure Switches (AW 500-800) > Concentric Vent Kit (3” & 4” PVC/CPVC only) > SMART SYSTEM PC Software > Room Air Vent Kits > Multi-Stack Frame Firing Control Systems > M9 > M7 > M13 Standard Construction California Code (AW 285-800) CSD1 / FM / GE Gap (AW 500-800) Registered under U.S. Patent # 7,506,617 3 Shield ® 150,000 to 500,000 Btu/hr Models 96 % Thermal Efficiency for Life The SHIELD™ commercial water heater delivers best-in-class innovation from Lochinvar. It operates at 96% thermal efficiency, with inputs up to 500,000 Btu/hr, and provides a 100% effective defense against a water heater’s worst enemy—lime scale buildup inside the tank. SHIELD uses the industry’s most advanced stainless steel heat transfer system. Sealed combustion technology delivers a quiet and environmentally friendly supply of heat to the system. Plus, with drawdown capacity as much as 15% higher than typical tank-type heaters, you get more usable hot water than any other competing models. The result is quiet, long-lasting green performance…life cycle efficiency that keeps saving money, year after year. Long-Lasting Life Cycle Efficiency High-efficiency tank-type water heaters have one thing that SHIELD does not, energy-robbing lime scale buildup. This insulates the water from the heat source, decreasing thermal efficiency, which increases operating costs. Additionally, the rate of scaling increases with temperature and usage. Just a ¼” of lime scale buildup will cause increased fuel consumption and raise operating costs as much as 25%. Lime scale buildup also requires periodic acid washes in the tank that will simply result in a shorter useful life of the equipment. Efficiency Loss Due to Lime Scale Buildup % Efficieency over r Heater Life Opera ating Efficieency Standard Tank Types SHIELD can fire as low as 20% of maximum input when water heating demand is lowest, and increase to 100% for peak-demand periods. This results in better overall efficiency and less cycling compared to “on-off” tanktype units that can only fire at 100%. ‘Neg/Reg’ Sealed Combustion Technology SHIELD utilizes an advance combustion system which provides NOx ratings compatible with the most stringent air quality standards. Additionally, the NEG/REG sealed combustion technology allows the unit to operate with inlet gas pressure as low as 4 inches water column. Advanced Adva Ad vanc va nced d EEl Electronic lect le ctro troni nic ic Co C Control ont ntro tro roll SHIELD SHIELD HighEfficiency Tank Types Fully Modulating Burner with 5:1 Turndown Years of Operatio on Because Shield has no flue tubes inside the tank, the impact of lime scale is eliminated, ensuring high efficiency and low operating costs throughout its life cycle. The chart below illustrates SHIELD’s consistent “life cycle efficiency” compared to both standard and high-efficiency tank-type units which utilize flue tubes for heat transfer. SHIELD SHIE SH IELD IE LD features fea eattu ture ture ress th the he ul ultimate lti tima ima matte te w water ater at ter hheater eatte ea ter co ter cont control ntrro which makes system setup, service and operation a breeze. A 2-line, 16-character backlit LCD display gives readouts of setup, system status and diagnostic information in words, not codes. SMART CONTROL™ also includes: > Night Setback > Time Clock > Alarm Contacts > Runtime Contacts > Service Mode > Last 10 Lock-Outs 7 Venting Options - Easy, Flexible Installation and Service Room Air Vertical Room Air Sidewall Direct Vent Vertical Vertical w/Sidewall Air Direct Vent Vertical* D Direct Vent Sidewall* *Optional Concentric Vent Kit Sold S Separately Direct Vent Sidewall 4 Shield ® 150,000 to 500,000 Btu/hr Models Model Btu/hr Capacity GPH @ First Number Input (Gal) 100° Rise Hour A B D E SNR150-100 SNR200-100 SNA285-125 SNA400-125 SNA500-125 28" 28" 34" 34" 34" 44" 44" 32-3/4" 32-3/4" 32-3/4" 61-1/4" 61-1/4" 52-3/4" 52-3/4" 52-3/4" 150,000 199,999 285,000 399,999 500,000 93 93 125 125 125 175 233 332 465 582 249 307 432 565 682 80" 80" 80" 80" 80" F 73-3/4" 73-3/4" 75" 75" 75" G H I J 62-1/2" 62-1/2" 53" 53" 53" 68-3/4" 68-3/4" 59-3/4" 59-3/4" 59-3/4" 72-3/4" 72-3/4" 73-1/4" 73-1/4" 72" 74-1/4" 74-1/4" 70-1/2" 73-1/4" 75" Gas Water Air Vent Shipping Conn. Conn. Inlet Size Wt. (lbs.) 1/2" 1/2" 3/4" 1" 1" 1-1/2" 1-1/2" 2" 2" 2" 3" 3" 4" 4" 4" 3" 3" 4" 4" 4" 620 640 835 855 895 Change "N" to "L" for LP Gas. All information is subject to change. Standard Features > 96% Thermal Efficiency > Modulating Burner with 5:1 Turndown > Operates at Temperatures up to 180˚F for Sanitizing Applications > Stainless Steel Heat Exchanger > Glass-Lined Steel Tank > 150 PSI Working Pressure > ASME Tank Construction (SNA285–500) > Zero Clearances to Combustible Material > PVC, CPVC and Stainless Steel Venting up to 100 Equivalent Feet > Direct-Vent Sealed Combustion > Brass Drain Valve > > > > Rooftop and Sidewall Venting Sidewall Vent Terminal Room Air Venting up to 100 Equiv. Feet Advanced Electronic Control, with: - 2-Line, 16-Character LCD Display - Time Clock - Night Setback - Alarm Contacts - Runtime Contacts - Manual Reset High Limit - 3 Temperature Sensors - Flue Temperaure Sensor > Low-NOx Operation > > > > > > > Low Gas Pressure Operation Direct-Spark Ignition Certified for Installation on Combustible Floors ASME Temperature and Pressure Relief Valve 8-Foot Power Cord 3-Year Limited Warranty 1-Year Parts Warranty Optional Equipment > > > > Alarm Bell Concentric Vent Kit Condensate Neutralization Kit Low Water Cutoff 5 Intelli-Fin®1.5, 1.7 & 2.0 MBH Models The Intelligent Approach to Water Heating Our 1.5 million, 1.7 million, and 2 million-Btu/hr Intelli-Fin water heaters are whisper quiet. They are engineered to take advantage of the power of digital communications. That’s a powerful advantage, because this capability, along with Lochinvar’s engineering, means Intelli-Fin provides you with the lowest total cost of water heater operation. Pushing the Upper Limits of Efficiency Independent testing shows that Intelli-Fin reaches up to 97% thermal efficiency. That means for every energy dollar, 97 cents is converted into useable heat. To achieve this higher efficiency, Lochinvar utilizes a dual heat exchanger arrangement to create a heat trap. One heat exchanger surrounds the unit’s burner, absorbing heat at the point of combustion. A second heat exchanger captures additional heat as the spent gases are extracted from the combustion chamber. The position of this second heat exchanger forces the products of combustion to flow over it’s entire surface allowing the remaining heat to be absorbed and transferred to the water. Intelligent Enough to Speak Your Language Intelli-Fin is the first water heater designed to be compatible with LonWorks®, the interoperability language that is fast becoming the language standard for building management systems. To enhance this LonWorks performance Lochinvar has developed a new control, which provides a remarkable amount of information and the ability to customize equipment for a specific application. This control along with the Command Display allows local monitoring of 21 diagnostic points and adjustment of 6 operational characteristics. If remote system management is desired, all Intelli-Fin functionality can be accessed, reviewed and adjusted via a phone line and personal computer. Adjust Output to Match Demand Intelli-Fin utilizes variable frequency drive technology to control gas and air input to the burner, ensuring complete combustion and enabling infinitely proportional adjustment of Btu/hr output. In fact, Intelli-Fin can reduce output from 100% to 25% of rated capacity and efficiently provide heat at any fraction of the load in between. This variable combustion process combined with Lochinvar’s new temperature control, accurate to with in 1°F, enables Intelli-Fin to track the heating load precisely. Flexibility in Water and Gas Supplies Intelli-Fin can operate with a minimum inlet gas pressure as low as 4 inches of water column. This reduced input requirement prevents nuisance operational problems in areas of varying gas supply pressures. Additionally, the sophisticated heat transfer system of Intelli-Fin integrates dual heat exchangers with a full automatic pumped bypass. This design allows Intelli-Fin to operate with return water temperatures as low as 50°F, providing increased installation flexibility in applications such as heat pump, snow melting and radiant floor systems. An Intelligent Use of Space Intelli-Fin’s chassis has been engineered so that it makes use of vertical rather than horizontal space. This allows the smaller footprint, but the unit is still so compact that it fits in spaces no higher than 80 inches. For even more convenience, Intelli-Fin offers several venting options. If your project demands high efficiency, Intelli-Fin delivers. In fact, it’s virtually impossible to be any better. Venting Options – Using Category IV approved venting material Intelli-Vent Vertical Vents vertically up to 100 equivalent feet. Directly draws combustion air 100 equivalent feet from a side wall. Intelli-Vent Horizontal Vents horizontally up to 100 equivalent feet. Directly draws combustion air 100 equivalent feet from the roof top. Vertical Vents vertically using Category IV approved vent material. Sidewall Vents horizontally up to 100 equivalent feet. Direct Vent Horizontal Vents horizontally up to 100 equivalent feet. Directly draws combustion air 100 equivalent feet from a side wall. Direct Vent Vertical Vents vertically up to 100 equivalent feet. Directly draws combustion air 100 equivalent feet from the roof top. 6 Intelli-Fin® 1.5, 1.7 & 2.0 MBH Models Dimensions & Specifications Model Number IWN1500 IWN1700 IWN2000 Btu/hr Input 1,500,000 1,700,000 2,000,000 GPH @ 100°F Rise 1,700 1,927 2,267 A 67-3/4” 72-1/4” 79” D 52-3/4” 57-1/4” 64” Notes: Change ‘N’ to ‘L’ for LP Gas Models. No deration on LP models. All gas connections are 1 1/2” NPT. All water connections are 3”. E 40-3/4” 45-1/4” 52” F 4-1/2” 4-1/2” 6-1/2” Air Inlet Size 6” 6” 8” Vent Size 6” 7” 8” Shipping Weight 1,475 1,545 1,610 Performance data is based on manufacturer test results. Standard Features Optional Equipment • Up to 97% Thermal Efficiency • 4:1 Turndown • LonMark Building Management System Compatibility • Command Display - 21 Point Diagnostic Control (One per Job Site) • Variable Frequency Drive • Digital Temperature Control Accurate to 1ºF • Alcromesh Burner with 5-Year Limited Warranty • Low NOx Operation Exceeds the most Stringent Air Quality Requirements • ASME Copper Finned Tube Heat Exchanger • 160 psi Working Pressure • Gasketless Heat Exchanger Design • All Bronze Circulating Pump-Mounted and Wired • Pump Delay • Glass-Lined Water Surfaces • Internal Stainless Steel Jacket • Internal Corrosion Protection • Low Gas Pressure Operation • Zero Clearance to Combustible Materials • Alarm Contacts on any Failure • Contacts for Air Louver • ASME Temperature & Pressure Relief Valve • Down Stream Test Valve • Adjustable High Limit w/ Manual Reset • Manual Control Override • Flow Switch • Small Footprint • Whisper Quiet Operation • 24 Volt Circuit Breaker • Freeze Protection • Construction Air Filter • 5 Year Limited Warranty on Heat Exchanger (See warranty for details) • 4-20 mA VDC Signal • Additional Command Display • Alarm Bell • Cupro-Nickel Heat Exchanger • High Gas Pressure Switch • Low Gas Pressure Switch • Horizontal Air Intake Cap • Horizontal Vent Cap • Low Water Cut-Off • Neutralization Kit MONITORING • Local Monitoring via Personal Computer -includes serial LonTalk adapter & serial cable • Remote Monitoring via Personal Computer -includes serial LonTalk adapter, approved network modem and adapter cable SEQUENCING • Standard Sequencing Package: First On/Last Off First On/First Off with Lead-Lag • Custom Sequencing Package: Efficiency Optimization Efficiency Optimization with Run Time Equalization First On/Last Off First On/First Off with Lead-Lag Firing Control Systems • M9 • M7 HSI (Standard) California Code Registered under U.S. Patent # 6,428,312, 6,619,951 & 6,694,926 7 Power-Fin® 500,000 - 2,000,000 Btu/hr Models The Next Generation The latest generation of Power-Fin continues to evolve, with new “Built-in Advantages” from Lochinvar Corporation®. These include expanded burner modulation and the advanced SMART SYSTEM™ operating control, including a built-in cascading sequencer for up to eight water heaters. Power-Fin water heaters can be installed with Lochinvar’s advanced Lock-Temp® storage tanks, in a wide variety of combinations to meet system sizing requirements. “Factory packaged” water heater/storage tank systems can be built to your specifications, with all piping installed, and shipped on I-beam skids. Control • Built-in cascading sequencer controls up to 8 units • 2-line 16-character LCD readout of setup, system status and diagnostic data in words, not codes. • Password security • Pump control for operation of water heater pump • Pump delay w/freeze protection • Low NOx operation • 0-10 Vdc BMS input for easy integration into Building Management Systems • Optional smart system PC software for advanced setup and diagnostics Infinite Modulation With thermal efficiencies up to 87%, Power-Fin water heaters feature infinitely modulating burner firing rates (turndown), precisely matching the firing rate to domestic water load requirements. The result is better overall efficiency and less cycling. Power-Fin water heaters may be specified as either 5:1 turndown (502 - 2001), 2:1 turndown (1501 - 2001), or ON/OFF (502 - 1302). With 5:1 turndown the burner fires as low as 20% of maximum input when demand is lowest and increases the firing rate up to 100% as demand increases. Models with 2:1 turndown modulate from 50% to 100% of maximum input. Gasketless Heat Exchanger The Power-Fin heat exchanger features an array of 20 or 24 copper-finned tubes surrounding the burner for maximum heat transfer. Lochinvar also pioneered the “gasketless” heat exchanger, which eliminates the use of O-rings and gaskets. Because of the time-proven reliability of this design, the Power-Fin heat exchanger is backed by a 5 year limited warranty. Venting Options DirectAire Horizontal Vents horizontally up to 50 equivalent feet using Category IV vent materials. Draws combustion air up to 50 ft. from a different pressure zone. DirectAire Vertical Direct Venting Sidewall Venting Horizontal or vertical venting up to 50 equivalent feet using Category IV vent materials. Draws combustion air from the same pressure zone. This option only available with 5:1 (M) firing code models. Common Venting Vertical venting up to 50 equivalent feet using Category I or IV vent materials. Draws combustion air up to 50 ft. from a different pressure zone. Vents multiple units vertically through one vent termination with Category II vent materials and draws combustion air from the room, roof or sidewall. Vent kit and Category IV to II conversion kit required. Horizontal venting up to 50 equivalent feet using Category IV vent materials. Draws combustion air from the room. Vertical Vent Vertical venting using Category I or Category IV vent materials. Draws combustion air from the room. 8 Power-Fin® 500,000 - 2,000,000 Btu/hr Models Dimensions & Specifications J K M L B G C P GPH @ 100°F Rise F9 M9 Model Number Btu/Hr Input PFN0502PM PFN0752PM PFN1002PM PFN1302PM PFN1501PM PFN1701PM PFN2001PM 500,000 750,000 999,999 1,300,000 1,500,000 1,700,000 2,000,000 515 773 1,030 1,323 1,527 1,731 2,036 Model Number K L M N 11-1/2” 11-1/2” 11-1/2” 11-1/2” 5-3/4” 5-3/4” 5-3/4” 11-1/4” 11-1/4” 11-1/4” 19-1/2” 22-1/4” 25” 27-1/2” 17-1/2” 17-1/2” 17-1/2” 17-1/2” 21-1/2” 21-1/2” 21-1/2” PFN0502PM PFN0752PM PFN1002PM PFN1302PM PFN1501PM PFN1701PM PFN2001PM 23” 30-1/2” 37-3/4” 46-1/4” 43-1/2” 48” 54-3/4” 527 791 1,054 1,371 1,582 1,793 2,109 Notes: Change ‘N’ to ‘L’ for LP Gas Model. A 44-1/2” 52” 59-1/4” 67-3/4” 65-1/2” 70” 76-3/4” > Up to 87% Thermal Efficiency (M#) > Modulating Burner with 5:1 Turndown > Up to 84% Thermal Efficiency (B#/F#) > Modulating Burner with 2:1 Turndown (B#) > On/Off Burner (F#) > Fan Assisted Sealed Combustion > Direct-Spark Ignition > Low NOx Operation > Low Gas Pressure Operation > Venting Flexibility > Category I (B# & F#) > Category IV Venting (M#) > Optional Combined Venting Cat. II (M#) > ASME Copper-Finned Tube Heat Exchanger > ASME Certified, “HLW” Stamped > 150 psi ASME T & P Relief Valve > Gasketless design > 160 psi working pressure > On/Off Switch > Adjustable High Limit w/ Manual Reset > Flow Switch > Low Air Pressure Switch > Flue Temperature Sensor > Downstream Test Cocks > Combustion Air Filtration > All Bronze Circulating Pump > Zero Clearances to Combustible Material > 1 Year Warranty on Parts > 5 Year Limited Warranty (See Warranty for Details) E M9 F G H J 19-1/2” 19-1/2” 19-1/2” 19-1/2” 21” 21” 21” 6-1/2” 6-3/4” 7-1/4” 8-1/4” 13-1/2” 13-1/2” 13-1/2” 6” 6” 6” 6” 8” 8” 8” 8” 8” 8” 8” 10” 10” 10” 7-3/4” 7-3/4” 7-3/4” 7-3/4” 9-1/2” 9-1/2” 9-1/2” B C D 28-1/2” 28-1/2” 28-1/2” 28-1/2” 29-3/4” 29-3/4” 29-3/4” 23-1/4” 23-1/4” 23-1/4” 23-1/4” 27-1/4” 27-1/4” 27-1/4” 34” 41-1/2” 48-3/4” 57-1/4” 58-3/4” 63-1/4” 70” P B9/F9 P M9 Gas Conn. Air Inlet Cat I B9/F9 Vent Sizes Cat II M9 Cat IV M9 Wt. (lbs) 15-1/4” 15-1/4” 15-1/4” 15-1/4” 24-1/2” 24-1/2” 24-1/2” 15-1/4” 15-1/4” 15-1/4” 15-1/4” 19-1/2” 19-1/2” 19-1/2” 1” 1-1/4” 1-1/4” 1-1/4” 1-1/2” 1-1/2” 1-1/2” 5” 5” 6” 6” 6” 7” 8” 7” 9” 10” 12” 12” 14” 14” 7” 9” 10” 12” 8” 9” 10” 4” 5” 6” 8” 6” 7” 8” 571 620 669 718 1,115 1,150 2,045 No deration on LP models. Standard Features E B9/F9 N 17-3/4” 17-3/4” 17-3/4” 17-3/4” 21” 21” 21” Temperature rise calculations based on firing rate of 100% All water connections are 2-1/2” > Low Voltage Terminal Strip > 24 VAC Auxiliary Device Relay > SMART SYSTEM Operating Control > Auxiliary Proving Switch Contacts > 2 line, 16 Character Display > Flow Switch Contacts > Dual Level Password Security > Alarm on Any Failure Contacts > Built in Cascading Sequencer for > Runtime Contacts up to 8 Water Heaters > Cascade Contacts > Building Management System Integration with 0-10 VDC Input > 0-10 VDC BMS External Control Contact > Low Water Flow Safety Control & Indication > Inlet & Outlet Temperature Readout > M# Indicates 5:1 Turndown, Category IV > Product Service Indicator > B# Indicates 2:1 Turndown, Category I > Freeze Protection > F# Indicates 100% On/Off Fire, Category I > Service Reminder > Time Clock > M9 Standard > Data Logging > B9 or F9 Special Order, Factory Trimmed > Hours Running, Space Heating > M7, B7 or F7 California Code > Hours Running, Domestic Hot Water > Ignition Attempts > Last 10 Lockouts > Alarm Bell on Any Failure > Programmable System Efficiency Optimizers > Copper-Nickel Heat Exchanger > Night Setback > High & Low Gas Pressure Switches > Anti-Cycling w/ Manual Reset > Outdoor Air Reset Curve > Low Water Cutoff w/Manual Reset & Test > Ramp Delay > SMART SYSTEM PC Software > Boost Temperature & Time > Vent Kits: > Pump Control - Horizontal Exhaust Cap > Domestic Hot Water Pump - Horizontal Air Intake Cap > High Voltage Terminal Strip - Horizontal Direct Vent Kit > 120 VAC/ 50-60 Hertz/ 1 Phase Power Supply - Category IV to Category II Conversion Kit > Pump Contacts with Pump Relays Registered under U.S. Patent # 7,506,617 Smart System Features Firing Control Systems Optional Equipment 9 Copper-Fin II® 400,000 to 2,070,000 Btu/hr Models Thermal Efficiency Is Higher... While Footprint And Vent Sizes Are Smaller Lochinvar’s Copper-Fin II® line of high efficiency commercial gas water heaters gives you all the advantages of lime scale-free, copper-finned tube heat exchanger technology plus the benefits of a sealed combustion system. Every Copper-Fin II model offers four major advantages: higher efficiency, smaller footprint, smaller vent diameters and a wide variety of venting options. Outstanding Thermal Efficiency Copper-Fin II water heaters offer a remarkably high 85% thermal efficiency. This means that 85¢ out of every fuel dollar goes into heating the water, dramatically reducing the operating cost of the equipment. Copper-Fin II achieves this efficiency through the combination of an advanced fan assisted combustion system and exclusive gasketless copper fin tube heat exchanger. A time tested and proven combination. Meets The Toughest Air Quality Standards Because of our unique fan-assisted combustion process, the Copper-Fin II exceeds today’s toughest NOx emissions requirements. An independent certification laboratory test gave us a rating of less than 30 ppm — corrected to 3% O2. And less NOx means a cleaner environment. Proportional Firing The Copper-Fin II’s proportional firing lowers your energy costs and delivers more consistent water temperatures. Multiple gas valves supply gas to the burners in stages, and multiple blowers maintain the proper airflow to ensure the most efficient combustion at each level of use. Our built-in sequencer controls each of these functions. With digital accuracy, the sequencer carefully monitors the need for heat, and as demand increases or decreases, it automatically adjusts the blower output and gas valves. As the demand is met, the system lowers performance gradually, turning off gas valves and reducing combustion air in direct proportion. Compact Design - For Installation Ease The Copper-Fin II is compact enough to fit through standard 36” doorways with ease. Even our 2 million Btu/hr model is only 33-1/2” wide. This space-saving design frees up more space in the mechanical room. And our optional Multi-Stack™ frame lets you put two units in the footprint of just one Venting Options Sidewall (CF 401-751) Conventional Draws fresh air from inside the room. Vents up to 50 equivalent feet directly through the outside wall without the need for a powered sidewall cap. Vents into conventional flue or vent breaching using Type B double wall vent. Powered Sidewall DirectAire Vertical Vents directly through the outside wall using an optional powered sidewall cap. Ideal when a vent stack is not practical. DirectAire Vertical w/ Sidewall Inlet Outdoor Draws fresh air from outside and vents through conventional vertical flue. Power DirectAire Horizontal Draws fresh air from outside and vents through conventional vertical flue. Draws fresh air from outside and vents through sidewall using optional powered vent cap. Requires optional outdoor vent cap. Use when indoor space is a problem or if outdoor location gives better access. Aire-Lock Direct Vent Draws fresh air 50 equivalent feet from a sidewall. Vents horizontally up to 50 equivalent feet through the sidewall. 10 Copper-Fin II® 400,000 to 2,070,000 Btu/hr Models Model Number CFN401PM CFN501PM CFN651PM CFN751PM CFN0991PM CFN1261PM CFN1441PM CFN1801PM CFN2071PM Btu/hr GPH @ Input 100°F Rise 399,999 412 500,000 515 650,000 670 750,000 773 990,000 1,020 1,260,000 1,298 1,440,000 1,484 1,800,000 1,855 2,070,000 2,133 A 31-1/2” 31-1/2” 31-1/2” 31-1/2” 36” 36” 36” 36” 36” B 37-3/4” 45-1/2” 56-3/4” 64” 48-1/4” 58-1/2” 68-3/4” 82-1/4” 92-1/2” C 22-1/4” 22-1/4” 22-1/4” 22-1/4” 33-1/2” 33-1/2” 33-1/2” 33-1/2” 33-1/2” D 12-1/2” 12-1/2” 12-1/2” 12-1/2” 15-3/4” 15-3/4” 15-3/4” 15-3/4” 15-3/4” Notes: Change ‘N’ to ‘L’ for LP gas models. Water connections for models (CF 401-751) are 2” NPT on 6-1/2” centers. Performance data is based on manufacturer test results. E 7” 7” 8-1/2” 8-1/2” 8” 9” 9” 10” 10” F 7” 7” 8-1/4” 8-1/4” 9-1/4” 10-1/4” 10-1/4” 11-1/2” 11-1/2” G 29” 29” 29” 29” 33-3/4” 33-3/4” 33-3/4” 33-3/4” 33-3/4” H 23-1/2” 23-1/2” 23-1/2” 23-1/2” 27” 27” 27” 27” 27” J 8” 8” 8” 8” 9-1/4” 9-1/4” 9-1/4” 9-1/4” 9-1/4” K 6-1/2” 6-1/2” 6-1/2” 6-1/2” 9” 9” 9” 9” 9” • • • • • • • • • • • • • • • 85% Thermal Efficiency ASME Copper Finned Tube Heat Exchanger Gasketless Heat Exchanger Design Proportional Firing with up to 4 Stages of Operation Digital Operator Interface Panel Sealed Combustion Chamber Stainless Steel Burners Low NOx Operation Exceeds the most Stringent Air Quality Requirements 160 PSI Working Pressure All Bronze Circulating Pump Pump Delay Glass-Lined Water Surfaces Loch-Heat Ceramic Tile Combustion Chamber Hot Surface Ignition ASME Temperature & Pressure Relief Valve Inlet & Outlet Temperature Gauges Referenced Gas Valves Field Convertible Air Inlet Connection Adjustable High Limit w/ Manual Reset P 18-1/2” 18-1/2” 18-1/2” 18-1/2” 20-1/2” 20-1/2” 20-1/2” 20-1/2” 20-1/2” Vent Air Gas Size Inlet Conn 6” 6” 1-1/4” 6” 6” 1-1/4” 8” 8” 1-1/4” 8” 8” 1-1/4” 10” 10” 2” 12” 12” 2” 12” 12” 2” 14” 12” 2” 14” 12” 2” Shipping Weight 430 480 550 605 930 995 1,130 1,285 1,400 No deration on LP models. Water connections for models (CF 0991-2071) are 2-1/2” NPT on 11-1/4” centers. Standard Features • • • • L 30-3/4” 30-3/4” 30-3/4” 30-3/4” 41-3/4” 41-3/4” 41-3/4” 41-3/4” 41-3/4” Firing Controls • • • • • • • Combustion Air Filter Freeze Protection Complete System Redundancy Flow Switch 24 Volt Control System BMS Terminal Strip 5 Year Limited Warranty on Heat Exchanger (See warranty for details) Optional Equipment • • • • • • • • • • Alarm Bell Contacts for Air Louvers Contacts on any Failure Cupro-Nickel Heat Exchanger High Gas Pressure Switch w/ Manual Reset Low Gas Pressure Switch w/ Manual Reset Low Water Cut-Off MP2 Sequencer Multi-Stack Frame Combustible Floor Shield (CF 401-751) M9 M7 Hot Surface Ignition with Electronic Supervision (Standard) California Code Registered under U.S. Patent # 5,989,020 11 Copper-Fin® 495,000 to 2,065,000 Btu/hr Models Installation Flexibility and Cost-Savings With compact sizes that use less floor space than ever before, all Copper-Fin units are narrow enough to fit through a standard 36” doorway–an advantage most commercial boilers can’t provide. Plus, thanks to special insulating materials, Copper-Fin units require only 3” clearance from combustible walls. What’s more, our Multi-Stack frame allows you to install two units in the area normally required for one. This makes it easier to fit multiple Copper-Fin water heaters into cramped mechanical rooms. And you can even use a smaller diameter vent stack - up to 8” smaller than typically required for comparable atmospheric boilers - so it saves money as well as valuable mechanical room space Unique Copper-Fin Heat Exchanger Enhanced to Provide Performance and Serviceability The Lochinvar Copper-Fin water heater design uses a two-pass heat exchanger. Water is circulated through a row of highly-efficient, finned copper tubes. The high rate of water flow creates a scouring action that prevents sediment and lime-scale buildup so common in conventional water heaters, and the finned copper tubes allow maximum heat transfer efficiency. Our newly enhanced Copper-Fin models offer the same reliable operation, and feature a more service friendly design. The referenced gas valves are in the upper deck for easy access, and the electrical and EMS connections have all been repositioned toward the front of the unit for easier service access. To create this special heat capability, Lochinvar extrudes the fins from thick wall copper tubing to precise specifications -exactly 7 fins per inch. The result is an integrally-finned tube with a heat transfer ratio 9 times greater than a plain copper tube. HeavyDuty Gasketless Design What’s more, advanced casting processes allowed Lochinvar to develop a unique one-piece header system. This gasketless design provides enhanced reliability, improved durability and optimizes performance - but without the problems or failures so common to O-rings and gaskets. Meets The Toughest Air Quality Standards Because of our unique fan-assisted combustion process, the Copper-Fin exceeds today’s toughest NOx emissions requirements. An independent certification laboratory test gave us a rating of less than 30 ppm —corrected to 3% O2. And less NOx means a cleaner environment. The gas valves are referenced to the sealed combustion chamber to improve operational performance by monitoring the pressure in the sealed combustion chamber and adjusting gas flow to maintain the optimum air/fuel mixture. And the built-in air inlet filter reduces maintenance and improves performance by trapping dust and airborne particulates that can foul the burners and blowers. With duel sight glasses (one on each end), you can easily monitor burner performance and flame characteristics throughout the entire combustion chamber. The operator interface panel provides electronic temperature control and comprehensive diagnostic status, without opening the control panel. Its user friendly design simplifies service while providing additional diagnostic information through a series of LEDs. Vent Cost Savings Btu/hr INPUT 495,000 645,000 745,000 985,000 1,225,000 1,435,000 1,795,000 2,065,000 CONVENTIONAL VENT SIZE 10” 12” 14” 16” 16” 18” 20” 22” COPPER-FIN VENT SIZE 6” 8” 8” 10” 12” 12” 14” 14” $ SAVINGS* $ 657 $ 731 $ 1,450 $ 1,790 $ 1,463 $ 2,432 $ 3,526 $ 3,738 *Comparison based on 25´ vent system using Type “B” double wall vent material, storm collar and vent cap. 12 Copper-Fin® 495,000 to 2,065,000 Btu/hr Models Model Number CWN0495PM CWN0645PM CWN0745PM CWN0986PM CWN1256PM CWN1436PM CWN1796PM CWN2066PM Btu/hr GPH @ Input 100°F Rise A 495,000 486 33-1/4” 645,000 633 33-1/4” 745,000 731 33-1/4” 985,000 967 36” 1,255,000 1,232 36” 1,435,000 1,409 36” 1,795,000 1,762 36” 2,065,000 2,027 36” B 45-1/4” 56-3/4” 64” 48-1/4” 58-1/2” 68-3/4” 82-1/4” 92-1/2” C 22-1/4” 22-1/4” 22-1/4” 33-1/2” 33-1/2” 33-1/2” 33-1/2” 33-1/2” D 18-1/2” 18-1/2” 18-1/2” 20-1/2” 20-1/2” 20-1/2” 20-1/2” 20-1/2” Change ‘N’ to ‘L’ for LP gas models. Water connections for models (CW 0495-0745) are 2” NPT on 6-1/2” centers. E 12-1/2” 12-1/2” 12-1/2” 15-3/4” 15-3/4” 15-3/4” 15-3/4” 15-3/4” F 9-1/2” 9-1/2” 9-1/2” 9-1/2” 10-1/2” 10-1/2” 11” 11” H 9-1/2” 16” 16” 18-1/4” 20-1/4” 20-1/4” 22-1/4” 22-1/4” J 22-3/4” 22-1/4” 31-1/4” 9-1/2” 10-1/2” 10-1/2” 11” 11” Vent Size 6” 8” 8” 10” 12” 12” 14” 14” Gas Shipping Conn. Weight 1-1/4” 490 1-1/4” 555 1-1/4” 610 2” 900 2” 1,020 2” 1,065 2” 1,265 2” 1,400 Performance data is based on manufacturer test results. Water connections for models (CW 0986-2066) are 2-1/2” NPT on 11-1/4” centers. Standard Features • 81% Thermal Efficiency • Electronic Temperature Control • Fan Assisted Combustion • Sealed Combustion Chamber • Stainless Steel Burners • Low NOx Operation Exceeds the most Stringent Air Quality Requirements • ASME Copper Finned Tube Heat Exchanger • 160 psi Working Pressure • Gasketless Heat Exchanger Design • All Bronze Circulating Pump • Pump Delay • Remote Tank Thermostat • Glass-Lined Water Surfaces • Redundant Gas Valves • Loch-Heat Ceramic Tile Combustion Chamber • Hot Surface Ignition • ASME Temperature & Pressure Relief Valve • Adjustable High Limit w/ Automatic Reset • Inlet/Outlet Temperature Gauges • Flow Switch • 24 Volt Control System G 30-3/4” 30-3/4” 30-3/4” 33-3/4” 33-3/4” 33-3/4” 33-3/4” 33-3/4” Available Firing Systems • BMS Terminal Strip • Freeze Protection • Combustion Air Filter • 5 Year Limited Warranty on Heat Exchanger (See warranty for details) F9 F13 F7 HSI (Standard) GE GAP/FM/IRI California Code Venting Options • Outdoor Vent Cap and Pump Cover • Intelligent Venting Solutions Optional Equipment • Alarm Bell • Contacts on any Failure • Contacts for Air Louvers • Cupro-Nickel Heat Exchanger • Low Gas Pressure Switch w/ Manual Reset • High Gas Pressure Switch w/ Manual Reset • Low Water Cut-Off • MP2 Sequencer • Multi-Stack Frame Registered under U.S. Patent # 5,989,020 13 Efficiency+® 150,000 to 300,000 Btu/hr Models Efficiency+ delivers unsurpassed performance, reliability and energy savings - year after year. While most competitive models peak at 80% thermal efficiency, the Efficiency+ delivers a remarkable 85% thermal efficiency, which means that 85¢ out of each fuel dollar goes toward heating the water, and not up the flue! When you combine the outstanding thermal efficiency with the scale free operation of the copper-fin tube heat exchanger and the convenience and safety of direct venting you have a product that is simply the smartest choice in water heating. Moreover, when you package the Efficiency+ with a Lock-Temp storage tank, you get a system that provides high efficiency and high delivery. The EfficiencyPac is a powerful combination that lowers operating costs, provides high delivery rates, and offers longer equipment life than traditional tank type water heaters. Dimensions & Specifications Model Number EWN150PM EWN200PM EWN250PM EWN300PM Btu/hr Input 150,000 199,999 250,000 300,000 GPH @ 100°F Rise 155 206 258 309 B 19-3/4” 23-3/4” 27-1/2” 31-1/4” D 16” 20” 23-3/4” 27-1/2” Notes: Change ‘N’ to ‘L’ for LP gas models. Air inlet equals vent diameter. Performance data based on manufacturer test results. Standard Features • 85% Thermal Efficiency • Sealed Combustion Chamber • Stainless Steel Burners • Low NOx Operation Exceeds the most Stringent Air Quality Requirements • ASME Copper Finned Tube Heat Exchanger • 160 psi Working Pressure • Gasketless Heat Exchanger Design • All Bronze Circulating Pump • Pump Delay w/Freeze Protection • Remote Tank Thermostat Venting Options Conventional Vents into conventional flue or vent breaching using Type B double wall vent. * Requires factory supplied vent kit. E 7-1/4” 9-1/4” 11” 13” G 11-3/4” 11-3/4” 11-3/4” 11-3/4” Vent Size* 5” 5” 6” 6” Gas Conn. 3/4” 3/4” 3/4” 3/4” Shipping Weight 300 315 355 360 Water connections for models (EW 150-300) are 2” NPT on 6-1/4” centers. * Vent size is for conventional venting, venting options require 1” smaller vent diameter. • Automatic Reset High Limit • Manual Reset High Limit • Glass-Lined Water Surfaces • Loch-Heat Ceramic Tile Combustion Chamber • Hot Surface Ignition • ASME Temperature & Pressure Relief Valve • 24 Volt Control System • 3 Year Limited Warranty on Heat Exchanger (See warranty for details) Available Firing Systems F9 F7 Hot Surface Ignition with Electronic Supervision California Code * E+ DirectAire Vent with * Outdoor Use when indoor space is a problem or if Sidewall Inlet Draws fresh combustion air from an outdoor location gives better access. outside wall horizontally, and vents combustion by-products through a vertical flue. Optional Equipment • Adjustable High Limit w/ Manual Reset • Alarm Bell • Contacts on any Failure • Cupro-Nickel Heat Exchanger • Flow Switch • Low Water Cut-Off • MP2 Sequencer • Multi-Stack Frame • Outdoor Installation Kit Registered under U.S. Patent No. 5,989,020 Direct Vent Vertical Draws fresh combustion air from outside, and vents combustion by-products through a vertical flue. * Direct Vent Horizontal Draws fresh combustion air from outside and vents combustion by-products through a side wall. 14 EfficiencyPac® Water Heater When you depend on hot water to stay in business, you should expect your water heater to work “smarter,” not harder! Traditional tank-type water heaters build up lime scale deposits when they heat water. This makes the water heater work harder, which leads to reduced efficiency, increased fuel costs, and shorter tank life. Lime scale build-up can cause a typical tank-type unit to fail in as few as 4–5 years. Sometimes less! The Efficiency Pac from Lochinvar combines the high efficiency of an Efficiency+ (EW series) water heater with the durability of a Lock-Temp baffled storage tank to create a water heating system that performs at peak efficiency year after year. • Thermal Efficiency – the Efficiency Pac delivers a remarkable 85% thermal efficiency. Most tank-type units peak at 80%. • No Lime Scale Build-up – the Efficiency Pac limits lime scale build-up with the scrubbing action of water flow through the solid copper-tube heat exchanger. • Unsurpassed Delivery – the Lock-Temp storage tank employs a baffle that allows 80% tank draw down without a drop in temperature. When combined with an 85% efficient water heater, the results are a First Hour Delivery that can’t be beat - 274 gallons for an EPN200-85. • Direct-Venting Convenience – The Efficiency Pac can draw its combustion air directly from outdoors. This feature prevents contamination from airborne dirt particles and chemicals, while isolating the water heater from negative air pressures often found in restaurants and mechanical rooms. Optional Equipment Standard Features • Adjustable High Limit • 85% Thermal Efficiency w/ Manual Reset • Sealed Combustion Chamber • Alarm Bell • Stainless Steel Burners • Low NOx Operation Exceeds the most • Contacts on any Failure • Cupro-Nickel Heat Exchanger Stringent Air Quality Requirements • Flow Switch • ASME Copper Finned Tube • Low Water Cut-Off Heat Exchanger • 160 psi Working Pressure • Gasketless Heat Exchanger Design • All Bronze Circulating Pump • Pump Delay w/ Freeze Protection • Manual Reset High Limit • Automatic Reset High Limit • Glass-Lined Water Surfaces • Loch-Heat Ceramic Tile Combustion Chamber • Hot Surface Ignition • ASME Pressure Relief Valve (Heater) • Foam Insulated, Glass-Lined Storage Tank • 24 Volt Control System • ASME Temperature & Pressure Relief Valve (Tank) • Brass Drain Valve (Tank) • 3 Year Limited Warranty on Heat Exchanger • 5 Year Limited Warranty on Tank Model Number EPN150-085 EPN200-085 EPN200-100 EPN250-100 EPN300-100 Btu/hr Input 150,000 199,999 199,999 250,000 300,000 Gallon Capacity 85 85 100 100 100 GPH @ 100°F Rise 155 206 206 258 309 A 78-1/2” 78-1/2” 75” 75” 75” B 28” 28” 32” 32” 32” C 38” 38” 43” 43” 43” Note: Change ‘N’ to ‘L’ for LP gas models. (no deration for LP). Vent size denotes conventional vent. Performance data is based on manufacturer test results. D 14-1/2” 14-1/2” 16-1/2” 16-1/2” 16-1/2” E 50-1/4” 50-1/4” 47” 47” 47” F 28” 32” 32” 35-1/2” 35-1/2” G 19” 21” 21” 23” 25” Vent Size 5” 5” 5” 6” 6” Note: Cold water inlet is 2” copper. Hot water outlet is 1 -1/2” copper. Shipping Weight 735 770 895 895 930 15 Copper-Fin® 90,000 to 500,000 Btu/hr Models High efficiency Copper-Fin water heaters combine the benefits of a copper finned tube heat exchanger with the simplicity of atmospheric combustion to provide a durable, trouble-free design with quick and easy component removal for service simplicity. And with the Lochinvar “Better Idea” system, you combine the highly efficient Copper-Fin water heater with a separate Lock-Temp storage tank and manifold piping. By separating the water heater and storage tank, stand-by losses are virtually eliminated and operating efficiency is enhanced. THERMAL 82 %EFFICIENCY For additional flexibility, the Copper-Pak starts with a Lock-Temp storage tank and places a Copper-Fin water heater directly on top in a unique space saving design. The circulator pump and piping are all in place and the unit is ready to be installed as a single package. Model Number CWN090PM CWN135PM CWN180PM CWN199PM CWN225PM CWN270PM CWN315PM CWN360PM CWN399PM CWN500PM Btu/Hr Input 90,000 135,000 180,000 199,999 225,000 270,000 315,000 360,000 399,999 500,000 GPH @ 100ºF Rise 89 134 179 198 224 268 313 358 397 497 A 29-1/2” 29-1/2” 29-1/2” 29-1/2” 29-1/2” 29-1/2” 29-1/2” 29-1/2” 29-1/2” 34-1/2” Notes: Change ‘N’ to ‘L’ to denote L.P. gas models Water connections are 2” NPT on 6-1/4” centers Approved for indoor installation only B 15-1/2” 19-1/2” 23-1/2” 26-1/2” 26-1/2” 29 1/2” 32-1/2” 35-1/2” 44-1/2” 52-1/2” C 21-1/2” 21-1/2” 21-1/2” 21-1/2” 21-1/2” 21 1/2” 21-1/2” 21-1/2” 22” 22” D 7-3/4” 9-3/4” 11-3/4” 13-1/4” 13-1/4” 14 3/4” 16-1/4” 17-3/4” 22-1/4” 26-1/4” E 6-3/4” 6-3/4” 6-3/4” 6-3/4” 6-3/4” 6-3/4” 6-3/4” 6-3/4” 16-3/4” 16-3/4” Vent Size 5” 6” 7” 7” 7” 8” 8” 9” 10” 10” Gas Conn. 1/2” 1/2” 3/4” 3/4” 3/4” 3/4” 3/4” 1” 1” 1” Shipping Weight 175 195 220 230 235 240 250 270 340 365 Electrical Requirements: 120 VAC / 2.5 AMP Performance data based on manufacturer test results Standard Features Optional Equipment Firing Controls • 82% Thermal Efficiency • Built-In Draft Diverter • Stainless Steel Burners • ASME Copper Finned Tube Heat Exchanger • 160 psi Working Pressure • Gasketless Heat Exchanger Design • All Bronze Circulating Pump • Pump Delay/Freeze Protection • Remote Tank Thermostat • Glass-Lined Water Surfaces • Loch-Heat Ceramic Tile Combustion Chamber • ASME Temperature & Pressure Relief Valve • Automatic Reset High Limit • 24 Volt Control System • CSA Design Certified for Installation on Combustible Floors • Terminal Strip • 3 Year Limited Warranty on Heat Exchanger • Adjustable High Limit w/ Manual Reset • Contacts on any Failure (CW 315-500) • Contacts for Air Louvers (CW 315-500) • Cupro-Nickel Heat Exchanger • Flow Switch • Low Water Cut-Off • Multi-Stack Frame • CPVC Vent Kit (CW 90-135) • Better Idea Manifold KIt • F1 - Standing Pilot (Standard CW 90-270) • F9 - Intermittent Spark Ignition (Standard CW 315-500) • F13 - GE GAP/FM/IRI • F7 - California Code (CW 225-500) 16 Copper-Pak® Water Heater The Copper-Pak packs the high efficiency of the Copper-Fin water heater into a unique space-saving design. It’s an excellent alternative to traditional tanktype water heaters. Shipped complete in one box, with all piping included and ready for installation. Think of the Copper-Pak as two separate units stacked on top of each other–a highly efficient Copper-Fin (CW series) water heater and a dedicated hot water storage tank. By combining the two in one unique design, we’ve reduced the footprint. That makes it easier to install in place of conventional tank-type water heaters. THERMAL 82 %EFFICIENCY Plus, thanks to copper finned-tube technology, the Copper-Pak has efficiencies up to a remarkable 82% – far exceeding most tank type water heaters. In fact, our 85 gallon - 180,000 Btu/hr model performs as well as most 100 gallon 200,000 Btu/hr tank-type water heaters. It produces just as much hot water, but at a much lower cost. Standard Features Optional Equipment • 82% Thermal Efficiency • Built-In Draft Diverter • Stainless Steel Burners • ASME Copper Finned Tube Heat Exchanger • 160 psi Working Pressure • Gasketless Heat Exchanger Design • All Bronze Circulating Pump • Pump Delay w/Freeze Protection • Glass-Lined Water Surfaces • Loch-Heat Ceramic Tile Combustion Chamber • ASME Temperature & Pressure Relief Valve (Heater Only) • Automatic Reset High Limit • 24 Volt Control System • Foam Insulated, Glass-Lined Storage Tank • Brass Drain Valve (Tank Only) • Terminal Strip • 5 Year Limited Warranty on Tank • 3 Year Limited Warranty on Heat Exchanger • Cupro-Nickel Heat Exchanger • Flow Switch • Low Water Cut-Off • Adjustable High Limit w/ Manual Reset Model Btu/hr Gallon GPH @ Number Input Capacity 100°F Rise A CPN180-85 180,000 85 179 80” CPN199-85 199,999 85 198 80” CPN199-100 199,999 100 198 76-1/2” CPN270-100 270,000 100 268 76-1/2” CPN360-100 360,000 100 358 76-1/2” B 28” 28” 32” 32” 32” C 35-1/2” 38-1/2” 38-1/2” 41-1/2” 47-1/2” D 14 -1/4“ 14-1/4” 16-1/4” 16-1/4” 16-1/4” E 50-1/4 “ 50-1/4 “ 47” 47” 47” F 22-3/4” 25-1/4” 25-1/4” 26-3/4” 29-3/4” Vent Gas Shipping G Size Conn. Weight 14-1/4” 7” 3/4” 700 14-1/4” 7” 3/4” 710 16” 7” 3/4” 815 16” 8” 3/4” 850 16” 9” 1” 880 Note: Water connections are 1-1/2” copper on all models. Change “N to “L” for LP gas models. Performance data is based on manufacturer’s test results. 17 Charger Gas Models 65,000 - 85,000 Btu/hr 125,000 - 500,000 Btu/hr Model Tank Btu/hr Gallon GPH @ Number Const. Input Cap. 100°F Rise LNR065-050* STD 65,000 48 60 CNR076-075* STD 76,000 75 74 CNR085-100* STD 85,000 100 82 CNR125-075-DF9* STD 125,000 75 121 CNR155-035-DF9* STD 155,000 38 150 CNR160-075-DF9* STD 160,000 75 155 CNR180-080-DF9 STD 180,000 80 175 CNR200-080-DF9 STD 199,999 80 194 CNR199-100-DF9 STD 199,999 100 194 CNR200-100-DF9 STD 199,999 98 194 STD 250,000 98 242 CNR250-100-DF9 CNR300-075-DF9 STD 300,000 75 291 CNR370-065-DF9 STD 370,000 65 359 CNR400-080-DF9 STD 399,999 80 388 CNR500-080-DF9 STD 505,000 80 496 ASME 250,000 98 242 CNA251-100-DF9 CNA301-075-DF9 ASME 300,000 75 291 CNA371-065-DF9 ASME 370,000 65 359 CNA401-080-DF9 ASME 399,999 80 388 ASME 505,000 80 496 CNA501-080-DF9 Indicates LP Inputs * These models have one aquastat. A 56-1/4” 59” 65-1/4” 65” 43” 65” 64-1/2” 64-1/2” 65” 75-1/2” 75-1/2” 64-1/2” 64-1/2” 60” 60” 75-1/2” 64-1/2” 64-1/2” 60” 60” B D 22” 26” 28-1/4” 28-1/4” 28-1/4” 28-1/4” 28-1/4” 28-1/4” 30-1/4” 28-1/4” 28-1/4” 28-1/4” 28-1/4” 30-1/4” 30-1/4” 28-1/4” 28-1/4” 28-1/4” 30-1/4” 30-1/4” 59-1/4” 62-1/4” 68-3/4” 72-1/4” 51” 72-1/4” 72-1/2” 72-1/2” 75” 83-1/2” 83-1/2” 73” 73-1/2” 71-1/2” 69-1/2” 83-1/2” 73” 73-1/2” 71-1/2” 69-1/2” E – – – 54-1/2” 34-3/2” 54-1/2” 56” 56” 56-1/2” 67” 67” 54-1/4” 54-1/4” 51-1/2” 51-1/2” 67” 54-1/4” 54-1/4” 51-1/2” 51-1/2” F – – – 34” 19-1/2” 34” 19-1/2” 19-1/2” 23-1/2” 19-1/2” 19-1/2” 29” 29” 23-1/2” 23-1/2” 19-1/2” 29” 29” 23-1/2” 23-1/2” G 13” 15” 15-1/2” 4-3/4” 4-3/4” 4-3/4” 4-3/4” 4-3/4” 4-1/2” 4-3/4” 4-3/4” 10-1/2” 10-1/2” 10-1/2” 10-1/2” 4-3/4” 10-1/2” 10-1/2” 10-1/2” 10-1/2” Vent Size 4” 4” 4” 5” 6” 6” 6” 6” 6” 6” 6” 7” 8” 8” 10” 6” 7” 8” 8” 10” Water Nipple Shipping Conn Spread Weight 3/4” T 11” 160 1” T 11” 247 1-1/4” T 16 ” 420 1-1/2” T/F 14-1/2” 520 1-1/2” T/F 19” 438 1-1/2” T/F 14-1/2” 520 1-1/2” T/F 19” 540 1-1/2” T/F 19” 540 1-1/2” T/F, 2” B 23” 725 1-1/2” T/F 19” 610 1-1/2” T/F 19” 610 1-1/2” F 19” 590 1-1/2” F 19” 665 1-1/2” F, 2” B 23” 800 1-1/2” F, 2” B 23” 800 1-1/2” T/F 19” 690 1-1/2” F 19” 645 1-1/2” F 19” 720 1-1/2” F, 2” B 23” 835 1-1/2” F, 2” B 23” 835 LP Inputs Standard Equipment: • Multi-Flue Tank Design—for increased efficiency and energy conservation • Durable Fused Glass Lining—prolongs tank life • Non-CFC Foam Insulation—up to 2” for max. heat retention and lower standby losses • Magnesium Tank Saver Anodes—inhibit corrosion • 150 psi Working Pressure • ASME Temperature & Pressure Relief Valve • Automatic Vent Damper • Heavy Steel Jacket with Baked Enamel Finish • Immersion Thermostat and Limit Controls • Low Silhouette Draft Hood • Cleanout—permits easy access for cleaning • Standing Pilot (65,000 76,000, and 85,000 Btu/hr models) • Spark Ignition with Supervised Pilot (Models 125,000 Gas Conn 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 1”, 3/4”LP 1”, 3/4”LP 1”, 3/4”LP 3/4” 3/4” 1”, 3/4”LP 1”, 3/4”LP 1”, 3/4”LP Btu/hr and larger) • Approved for 180°F Operation • Slide Out Burner Tray—for easy servicing (125,000 Btu/hr and larger) • 3 Year Limited Tank Warranty • 1 Year Limited Parts Warranty (See warranty for details) Optional Equipment: Model Number CLR160-075-DF9 CLR200-080-DF9 CLR250-100-DF9 CLR400-080-DF9 CLR500-080-DF9 CLA251-100-DF9 CLA401-080-DF9 CLA501-080-DF9 Btu/hr Input 155,000 190,000 235,000 375,000 475,000 235,000 375,000 475,000 GPH @ 100°F Rise 147 184 228 364 461 228 364 461 • Temperature and Pressure Gauge • NSF Construction Low NOx models are available. Consult factory. 18 Super Charger Gas Models Super Charger Model Tank Btu/hr Gallon GPH @ A B D E F G Vent Number Const. Input Cap. 100°F Rise Size CNR625-065 STD 625,000 65 606 69-1/2” 28-1/4” 69” 54-1/4” 29” 10-1/2” 8” CNR725-080 STD 725,000 80 703 79-3/4” 28-1/4” 79-1/4” 64-1/4” 29” 10-1/2” 8” CNA626-065 ASME 625,000 65 606 69-1/2” 28-1/4” 69” 54-1/4” 29” 10-1/2” 8” CNA726-080 ASME 725,000 80 703 79-3/4” 28-1/4” 79-1/4” 64-1/4” 29” 10-1/2” 8” Notes: Change “N” to “L” for LP gas models. Performance data is based on manufacturer test results. Standard Equipment: • Multi-Flue Tank Design—for increased efficiency and energy conservation • Durable Fused Glass Lining—prolongs tank life • Non-CFC Foam Insulation—up to 2” for max. heat retention and lower standby losses • Magnesium Tank Saver Anodes—inhibit corrosion • 150 psi Working Pressure • ASME Temperature & Pressure Relief Valve • Heavy Steel Jacket with Baked Enamel Finish • Immersion Thermostat and Limit Controls • Cleanout—permits easy access for cleaning • Spark Ignition with Supervised Pilot • Approved for 180°F Operation • Slide Out Burner Tray • Combustible Floor Approved • Fan Induced Combustion System • Simple 120 VAC Control Circuitry • 4-Second Main Gas Shutdown • High Btu/hr Input/Recovery • 3 Year Limited Tank Warranty • 1 Year Limited Parts Warranty (See warranty for details) Gas Conn 1”, 3/4” LP 1”, 3/4” LP 1”, 3/4” LP 1”, 3/4” LP Water Conn 1-1/2” F 1-1/2” F 1-1/2” F 1-1/2” F Shipping Weight 720 800 775 880 Optional Equipment: • NSF Construction • Temperature and Pressure Gauge Low NOx models are available. Consult factory. 19 TurboChargerTM High Efficiency Gas Models Model Number TNR125-060 TNR150-060 TNR200-060 TNR150-100 TNR200-100 TNR250-100 TNR300-100 TNR400-100 TNA251-100 TNA301-100 TNA401-100 Tank Btu/hr Const. Input *STD 125,000 *STD 150,000 *STD 199,999 *STD 150,000 *STD 199,999 STD 250,000 STD 300,000 STD 399,999 ASME 250,000 ASME 300,000 ASME 399,999 Gal. GPH @ Cap. 100°F Rise 60 148 60 178 60 238 100 178 100 238 100 297 100 342 100 446 100 297 100 342 100 446 A 57” 57” 57” 77-3/4” 77-3/4” 77-3/4” 77-3/4” 77-3/4” 77-3/4” 77-3/4” 77-3/4” Notes: *ASME Construction available upon request. Consult factory for details. Gas Connection is 3/4” NPT. (1” on 400 KBtu models) Performance data is based on Manufacturer’s test results. B 28-1/4” 28-1/4” 28-1/4” 28-1/4” 28-1/4” 28-1/4” 28-1/4” 28-1/4” 28-1/4” 28-1/4” 28-1/4” D 13” 13” 13” 13” 13” 13” 13” 13” 13” 13” 13” E 42-1/2” 42-1/2” 42-1/2” 62-1/2” 62-1/2” 62-1/2” 62-1/2” 62-1/2” 62-1/2” 62-1/2” 62-1/2” F 52-1/2” 52-1/2” 52-1/2” 73-1/4” 73-1/4” 73-1/4” 73-1/4” 73-1/4” 73-1/4” 73-1/4” 73-1/4” G 53-1/2” 53-1/2” 53-1/2” 74-3/4” 74-3/4” 74-3/4” 74-3/4” 73-1/4” 74-3/4” 74-3/4” 73-1/4” H 40” 40” 40” 60” 60” 60” 60” 60” 60” 60” 60” Shipping Weight 570 570 570 900 900 900 900 950 900 900 950 Change N to L for LP gas models. Water Connections are 1-1/2” NPT. Standard Equipment Optional Equipment • Up to 98% Thermal Efficiency - Fully condensing design maximizes efficiency for lower operational cost. • Direct Vent / Sealed Combustion - Draws all combustion air from outside and vents all byproducts outdoors. • Electronic Controls - Electronic thermostat adjustable up to 180°F. • Premix Power Burner - Fires into a submerged combustion chamber resulting in precise mixing of gas and air for optimum efficiency. • Submerged Combustion Chamber - Reduces radiant heat loss and increases efficiency. • Triple Pass Flue System - Unique triple bypass flue design, efficiently extracts available heat from the flue gases, increasing the rate of heat transfer. • Glass Lined Steel Tank - Fused to the tank at 1600°F, the durable glass lining ensures lasting protection against rust and corrosion while providing clean, clear hot water. • Tank Saver Anodes - Provides lasting protection from the effects of electrolytic corrosion. • Zero Clearance to Combustible Materials • Non-CFC Foam Insulation - Meets ASHRAE standby loss requirements. • Low NOx Operation Exceeds the most Stringent Air Quality Requirements • Built-In Power Cord - 6 feet in length for installation ease. • Handhole Cleanout - Provides easy access for inspection and cleaning of the tank interior. • Dielectric Nipples -Protects tank from corrosive action between dissimilar metals and reduce installed cost. • Brass Drain Valve • ASME Temperature & Pressure Relief Valve • 3 Year Limited Tank Warranty • 1 Year Limited Parts Warranty (See warranty for details) • NSF Construction • ASME Construction • Concentric Vent Kit Maximum Vent Lengths: 3” Vent (PVC or CPVC) TNR125-060 = 120 Equivalent Ft. TNR150-060 = 100 Equivalent Ft. TNR200-060 = 80 Equivalent Ft. TNR150-100 = 120 Equivalent Ft. TNR200-100 = 100 Equivalent Ft. TNR250-100 = 80 Equivalent Ft. TNR300-100 = 60 Equivalent Ft. TNR400-100 = 50 Equivalent Ft. 4” Vent (PVC or CPVC) TNR125-060 = 170 Equivalent Ft. TNR150-060 = 150 Equivalent Ft. TNR200-060 = 130 Equivalent Ft. TNR150-100 = 170 Equivalent Ft. TNR200-100 = 150 Equivalent Ft. TNR250-100 = 130 Equivalent Ft. TNR300-100 = 110 Equivalent Ft. TNR400-100 = 100 Equivalent Ft. 20 Charger Power DV Power Direct Vent Gas Models Model Tank Number Const. Gal. Btu/hr GPH @ Cap. Input 100°F Rise PNR150-080 PNR150-100 PNR200-080 PNR200-100 PNR250-080 PNR250-100 PNA251-080 PNA251-100 80 100 80 100 80 100 80 100 STD STD STD STD STD STD ASME ASME 150,000 150,000 199,999 199,999 250,000 250,000 250,000 250,000 Notes: Change ‘N’ to ‘L’ to denote LP models. 115 Volt AC required 145 145 194 194 242 242 242 242 A D E F 63-1/2” 72” 63-1/2” 72” 63-1/2” 72” 63-1/2” 72” 68-1/4” 77-1/4” 68-1/4” 77-1/4” 73” 82” 73” 82” 51-1/4” 60-1/4” 51-1/4” 60-1/4” 51-1/4” 60-1/4” 51-1/4” 60-1/4” 20-3/4” 20-3/4” 20-3/4” 20-3/4” 20-3/4” 20-3/4” 20-3/4” 20-3/4” Vent Water Connections Shipping Size Top Front Rear Weight 3” 3” 3” 3” 4” 4” 4” 4” 1-1/2“ 1-1/2” 1-1/2“ 1-1/2“ 1-1/2“ 1-1/2“ 1-1/2“ 1-1/2“ 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 2” 2” 2” 2” 2” 2” 2” 2” 645 735 645 735 645 735 720 815 Gas Connections are 3/4” NPT Standard Equipment Optional Equipment • Independent PVC Venting - The stand alone vent exhausts the byproducts of combustion and the separate air intake provides fresh combustion air to the unit. Vents up to 40 feet to an outside wall, with one 90 degree elbow, using 3” PVC or CPVC pipe. Vents up to 55 feet to an outside wall, with one 90 degree elbow, using 4” PVC or CPVC pipe. • Glass-Lined Steel Tank - 300 PSI test pressure, 150 PSI working pressure. • Magnesium Tank Saver Anode - Large diameter anode rod for longer tank life and greater protection. • Electronic Ignition - Spark-to-pilot ignition system eliminates the need for a continuously burning pilot light, which saves energy, by providing pilot gas only when the system calls for heat. • Approved for Operation at 180°F Outlet Temperature. • Temperature & Pressure Relief Valve - Factory installed. • Cleanout - Provides easy access. • Dielectric Fittings - Factory installed and designed to provide additional protection for longer tank life. • Brass Drain Valve • Automatic Induced-Draft Blower - Provides balanced flue operation for direct vent applications. • Non-CFC Foam Insulation - Meets ASHRAE standby loss requirements. • Warranty - 3 year limited tank warranty. 1 year limited warranty on parts. (See warranty for details) • ASME Tank Construction (250,000 BTU models only) • NSF Construction • Low NOx Construction Low NOx models are available. Consult factory. 21 Custom Hi-Power® Vertical And Horizontal Models VOLTAGE SCHEDULE J—208V 1ø K—208V 3ø A—240V 1ø B—240V 3ø W—277V 1ø Y—380V 3ø Z—415V 3ø X—480V 3ø N—600V 3ø = Voltage kW = Kilowatt * Model Vertical Round HV*kW-150 HV*kW-200 HV*kW-250 HV*kW-300 HV*kW-400 HV*kW-500 HV*kW-600 HV*kW-800 HV*kW-1000 Max. KW Gal. Cap. 135 180 216 270 360 396 396 396 396 150 200 250 300 400 500 600 750 950 A 65-1/2” 78” 92” 80” 80” 92” 92” 104” 128” B C Inlet 32” 32” 34” 40” 46” 46” 52” 52” 52” 38-3/4” 38-3/4” 40-3/4” 46-3/4” 52-3/4” 52-3/4” 60-3/4” 60-3/4” 60-3/4” D Outlet 7-3/4” 7-3/4” 19-1/2” 21” 22-1/2” 22-1/2” 24-1/2” 24-1/2” 24-1/2” Water Conn. (.lbs) 1-1/2” 1-1/2” 1-1/2 ” 1-1/2” 1-1/2 ” 1-1/2” 2” 2” 2” 2” 2” 2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” Shipping Weight 650 750 1,165 1,350 1,590 1,700 2,010 2,450 3,160 NOTES: Vertical Round models above 90 kW at 208V, 240V or 380V, and 162 kW at 415V, 480V, or 600V exceed the capacity of a single control box and may require multiple control panels. Consult the factory for specific details and optional construction. Vertical Square construction is available as an option for models that exceed the listed kW limits. Control panel height on Vertical Round models may exceed tank height – consult factory for specific heights on models with inputs above 72 kW. Vertical Square HV*kW-1250 HV*kW-1500 HV*kW-2000 HV*kW-2500 Horizontal Square HH*kW-150 HH*kW-200 HH*kW-250 HH*kW-300 HH*kW-400 HH*kW-500 HH*kW-600 HH*kW-800 HH*kW-1000 HH*kW-1250 HH*kW-1500 HH*kW-2000 HH*kW-2500 900 900 900 900 1,250 1,500 2,000 2,500 132-1/2” 128-1/2” 140-1/2” 146-1/2” 64-1/2” 70-1/2” 76-1/2” 82-1/2” 64-1/2” 70-1/2” 76-1/2” 82-1/2” 23-1/4” 25-1/4” 27-1/4” 29” 3” 3” 3” 3” 3” 3” 3” 3” 3,560 4,120 4,350 5,750 135 180 225 270 360 450 540 720 900 900 900 900 900 150 200 250 300 400 500 600 750 950 1,250 1,500 2,000 2,500 37” 37” 39” 45” 52” 52” 58” 58” 58” 64” 70” 76” 82” 68-1/2” 78” 90-1/4” 78-1/4” 78-1/4” 90-3/4” 90-3/4” 102-1/4” 126-1/4” 130-1/4” 126-1/4” 137-1/4” 144-1/4” 34-1/4” 34-1/4” 36-1/4” 42-1/4” 48-1/4” 48-1/4” 54-1/4” 54-1/4” 54-1/4” 60-1/4” 66-1/4” 72-1/4” 78-1/4” 12” 12” 13” 14-3/4” 16” 16” 13-1/2” 13-1/2” 13-1/2” 15” 16” 17-1/2” 16-1/2” 2” 2” 2” 2” 2” 2” 2-1/2” 2-1/2” 2-1/2” 3” 3” 3” 3” 2” 2” 2” 2” 2” 2” 2” 2” 2” 3” 3” 3” 3” 1,180 1,370 1,450 1,530 1,750 1,860 2,340 2,850 3,040 3,750 4,340 4,580 6,060 22 Custom Hi-Power® Commercial Electric Models Standard Features Optional Equipment • Glass Lined Steel Tank • Incoloy Heating Elements • Internal Fusing (above 120 amps) • Enamel Finished Galvanized Steel Jacket • Magnesium Tank Saver Anodes • Immersion Thermostat • Manual Reset High Limit • Full Length Hinged Doors with Key Lock • Terminal Block Connections • ASME Temperature and Pressure Relief Valve (Supplied, not installed) • Channel Iron Skid Base (except 150 & 200 gallon round or larger) • Approved for 180°F Temperature Operation • ASME Construction and National Board Listed • All models meet or exceed ASHRAE energy efficiency standards • 125 psi Working Pressure • Handhole or Cleanout • UL Listed (U.S. & Canada) • Safety Drain Pan (Square Models) • Control Voltage on/off Switch w/ Pilot Light • 3 Year Limited Tank Warranty • 1 Year Limited Parts Warranty • Low Water Cut-Off • Pilot Lights • Manual Limiting Switches • Alarm Bell • Shunt Trip Disconnect* • Low or High Water Pressure Switch • Lifting Lugs • Time Clock (7 day or 24 hour) • Safety Door Interlock • BMS Enable/Disable Contacts • Temperature and Pressure Gauges • Manway • 150 psi or 160 psi Working Pressure • Electronic Step Controller • Seismic attachment points (Must have seismic zone or city and state of install) Vertical Round 150-1000 Horizontal Square 150 - 2500 *Field Installed Vertical Square 1250-2500 23 Standard Hi-Power® Electric Models Standard Features B • Heavy Duty Glass-Lined Tank • Magnesium Tank Saver Anode • Low Watt Density Element • High Limit Cut-Off • Internal Fusing • Approved for 180°F Operation (Immersion models) • Factory-Installed Temperature and Pressure Relief Valve • Two Temperature Operation Available • Full 3” Foam Insulation • Hinged Door Access • Two Thermostat Control Types • U.L. Listed • 3 Year Limited Tank Warranty • 1 Year Limited Parts Warranty (See warranty for details) Model Number HS*09-052 HS*12-052 HS*15-052 HS*18-052 HS*24-052 HS*27-052 HS*30-052 HS*36-052 HS*09-082 HS*12-082 HS*15-082 HS*18-082 HS*24-082 HS*27-082 HS*30-082 HS*36-082 HS*45-082 HS*54-082 HS*09-120 HS*12-120 HS*15-120 HS*18-120 HS*24-120 HS*27-120 HS*30-120 HS*36-120 HS*45-120 HS*54-120 KW 9 12 15 18 24 27 30 36 9 12 15 18 24 27 30 36 45 54 9 12 15 18 24 27 30 36 45 54 Gallon Capacity 50 50 50 50 50 50 50 50 80 80 80 80 80 80 80 80 80 80 119 119 119 119 119 119 119 119 119 119 3/4" T & P RELIEF VALVE C HOT WATER OUTLET D COLD WATER INLET DRAIN 7" GPH @ 100°F Rise 37 50 62 74 99 112 124 149 37 50 62 74 99 112 124 149 186 223 37 50 62 74 99 112 124 149 186 223 Number of Elements 3 3 3 3 6 6 6 6 3 3 3 3 6 6 6 6 9 9 3 3 3 3 6 6 6 6 9 9 A 47-3/4” 47-3/4” 47-3/4” 47-3/4” 47-3/4” 47-3/4” 47-3/4” 47-3/4” 60-1/4” 60-1/4” 60-1/4” 60-1/4” 60-1/4” 60-1/4” 60-1/4” 60-1/4” 60-1/4” 60-1/4” 64-1/2” 64-1/2” 64-1/2” 64-1/2” 64-1/4” 64-1/2” 64-1/2” 64-1/2” 64-1/4” 64-1/2” B 24” 24” 24” 24” 24” 24” 24” 24” 26” 26” 26” 26” 26” 26” 26” 26” 26” 26” 30-1/4” 30-1/4” 30-1/4” 30-1/4” 30-1/4” 30-1/4” 30-1/4” 30-1/4” 30-1/4” 30-1/4” Notes: S = Surface-Mounted Thermostat C = Immersion Thermostat w/ Contactors Change “S” to “C” for Immersion Thermostat model. 1-1/2” NPT Water Connections KW 9 12 15 18 24 27 30 36 45 54 208V 43 58 72 87 115 130 144 173 216 260 A AMPERAGE TABLE Single Phase Three Phase 240V 277V 208V 240V 38 32 25 22 50 43 33 29 63 54 42 36 75 65 50 43 100 87 67 58 113 97 75 65 125 108 83 72 150 130 100 87 188 162 125 108 225 195 150 130 480V 11 14 18 22 29 32 36 43 54 65 D 41” 41” 41” 41” 41” 41” 41” 41” 52-1/2” 52-1/2” 52-1/2” 52-1/2” 52-1/2” 52-1/2” 52-1/2” 52-1/2” 52-1/2” 52-1/2” 55” 55” 55” 55” 55” 55” 55” 55” 55” 55” Shipping Weight 270 270 270 270 270 270 270 270 335 335 335 335 335 335 335 335 335 335 430 430 430 430 430 430 430 430 430 430 * = Voltage - See voltage schedule SURFACE MOUNTED THERMOSTAT VOLTAGE SCHEDULE T— 208V 1ø or 3ø P— 240V 1ø or 3ø W—277V 1ø Y–– 380V 3ø Z—415V 3ø X—480V 3ø C 30-1/2” 30-1/2” 30-1/2” 30-1/2” 30-1/2” 30-1/2” 30-1/2” 30-1/2” 32-1/2” 32-1/2” 32-1/2” 32-1/2” 32-1/2” 32-1/2” 32-1/2” 32-1/2” 32-1/2” 32-1/2” 37-1/4” 37-1/4” 37-1/4” 37-1/4” 37-1/4” 37-1/4” 37-1/4” 37-1/4” 37-1/4” 37-1/4” IMMERSION THERMOSTAT w/ CONTACTORS VOLTAGE SCHEDULE J—208V 1ø K—208V 3ø A—240V 1ø B—240V 3ø W—277V 1ø Y—380V 3ø Z—415V 3ø X—480V 3ø 24 Compact ASME Hi-Power Electric Models VOLTAGE SCHEDULE J—208V 1ø K—208V 3ø A—240V 1ø B—240V 3ø Model Number HC*kW-06A HC*kW-12A HC*kW-20A HC*kW-30A HC*kW-40A HC*kW-50A HC*kW-80A HC*kW-120A * W—277V 1ø Y—380V 3ø Z—415V 3ø X—480V 3ø Max Gal. kW Cap. 3 6 9 12 18 20 36 30 36 40 81 50 81 80 81 120 = Voltage A 17-1/2” 28” 27-1/2” 38” 48-1/4” 47-3/4” 60-1/4” 64-1/2” GPH@ 12 25 37 50 62 74 99 112 124 149 186 223 335 C 21” 21” 24-1/2” 24-1/4” 24-1/2” 30-1/2” 30-1/2” 30-1/2” D N/A N/A N/A N/A N/A 41” 52-1/2” 55” E 6-1/4” 6-1/4” 6-1/4” 6-1/4” 6-1/4” 6” 6” 6” Water Shipping Conn. Weight 3/4” 83 3/4” 118 3/4” 145 3/4” 180 3/4” 220 1-1/2” 270 1-1/2” 335 1-1/2” 430 see voltage schedule Amperage KW 100°FTable RISE 208V 3 6 9 12 15 18 24 27 30 36 45 54 81 B 16” 16” 20” 20” 20” 24” 26” 30-1/4” 14 30 43 58 72 87 115 130 144 173 216 260 389 SINGLE PHASE 240V 13 25 38 50 63 75 100 113 125 150 188 225 338 277V 11 22 32 43 54 64 87 97 108 130 162 195 292 208V – 17 25 33 42 50 68 75 83 100 125 150 225 THREE PHASE 240V 480V – – 14 7 22 11 29 14 36 18 43 22 58 29 65 33 72 36 87 43 108 54 130 65 195 97 Note: Models with an amp draw in excess of 120 amps require factory installed internal fusing. Standard Features • ASME Code Construction HLW • Heavy-Duty Glass-Lined Tank– 150 psi working pressure. • Magnesium Tank Saver– large diameter for longer tank life, greater protection. • Heating Element–Low watt incoloy construction for long life. • Energy Cut-Off–Shuts off electrical power should the water temperature in the tank exceeds 200°F. • Internal Fusing– All elements and controls are fused in accordance with U.L. requirements. • Approved for 180°F outlet temperature • Temperature and Pressure Relief Valve–Included • Insulation– Full 3”of foam insulation on the top and around the sides. Meets ASHRAE Energy Efficiency Standards. • Hinged Access Door–Provides easy access to electrical controls. • Immersion Thermostats and Contactors • Cleanout– 20 - 120 gallon models. • 3 Year Limited Tank Warranty • 1 Year Limited Parts Warranty (See warranty for details) Optional Equipment • Low Water Cut-Off • Safety Door Interlock • High and/or Low Water Pressure Limit Switches • Alarm Bell • Temperature & Pressure Gauge • Time Delay Step Sequences (24 kW & Above) • NSF Construction 25 Light Duty Commercial Electric Models Junior models Tall & Short models Element Availability INPUT VOLTAGE (WATT) 208V 240V 277V 480V E- 1500 Y Y Y Y F- 2000 Y Y Y Y G- 2500 Y Y Y Y H- 3000 Y Y Y Y J- 3500 Y Y Y Y L- 4000 Y Y Y Y K- 4500 Y Y Y Y M- 5000 Y Y Y Y P- 6000 Y Y Y Y Notes: Max. wattage Jr models 6 & 12 = 3000W Max wattage Jr. models 20 & 31 = 6000W Wattage Limits w/ Simultaneous Operation Model Gallon Number Capacity Junior Models JRW006E 6 JRW012E 12 JRW020E 19 JRW031E 30 Tall Models LTX030KK 30 LTX040KK 40 LTX052KK-T 50 LTX052KK 50 LTX066KK 65 LTX082KK 80 LTX120KK 119 Short Models LSX030KK 30 LSX040KK 40 LSX050KK 47 A B D Shipping Weight E 208V 240V 277V 480V - 10,000W (5,000W/5,000W) 10,000W (5,000W/5,000W) 12,000W (6,000W/6,000W) 12,000W (6,000W/6,000W) Voltage Schedule J - 208V K - 208V A - 240V B - 240V X - 480V 1ø 3ø 1ø 3ø 3ø WYZV- 277V 380V 415V 480V 1ø 3ø 3ø 1ø Note: Jr models available in 1ø and 480V 1ø only. 16-1/2” 27-3/4” 24-3/4” 30” 14” 14” 18” 22” 10-1/4” 21-1/4” 18-1/4” 23-1/2” 47” 47” 57-1/2” 46-1/2” 59-1/4” 59” 63-3/4” 18” 20” 20” 22” 22” 24” 28” - 29-3/4” 31-3/4” 31-3/4” 22” 24” 26” 24” 24-1/4” 24-1/4” Notes:Water connections 3/4” NPT on all models. (LTX120 is standard with 1” water connections) Standard wattage and voltage: 4500W/480V 3ø Standard wattage and voltage Jr. models: 1500W/277V 1ø 3” 3” 3” 4-1/2” 33 48 59 92 - 85 103 123 130 156 183 305 96 125 153 Standard Features • Energy Saving Design–All models meet the latest NAECA and ASHRAE Energy Efficiency Standards. • Glass–Lined Steel Tank–300 psi test pressure, 150 psi working pressure. • Non-CFC Foam Insulation–Surrounds the tank surface to minimize standby heat loss. Exceeds ASHRAE 90.1 standard. • Adjustable Thermostats–Adjustable, accurate control provides easy means of selecting most desirable temperature. • Automatic Overheat Protection–Provides automatic overheat safety control with manual reset high limit feature. • Magnesium Tank Saver Anode–Large diameter magnesium anode prolongs tank life and inhibits corrosion. • Dip Tube–Withstands temperatures of 400ºF. • ASME Temperature & Pressure Relief Valve–Included • Warranty – 3 year limited tank warranty. 1 year limited parts warranty. (See warranty for details) 26 Explosion-Resistant Electric Models Standard Features • Energy Saving Design - All models meet the latest NAECA and ASHRAE Energy Efficiency Standards. • Glass-Lined Steel Tank - Fused to the tank at 1600°F to assure lasting protection against rust and corrosion while providing clean, clear hot water. 300 psi test pressure provides 150 psi working pressure. • Non-CFC Foam Insulation - The polyurethane closed cell foam minimizes standby heat loss and maximizes heat retention. • Cold Water Inlet Tube - withstands temperatures of 400ºF • High Quality Thermostats - Adjustable, accurate control provides easy means of selecting most desired temperature. • Magnesium Tank Saver Anode Large diameter magnesium anode prolongs tank life and inhibits corrosion. • ASME Temperature & Pressure Relief Valve - Included with all models. • Heat Traps - Factory installed, minimizes heat loss through piping. • Dielectric Nipples - Provides protection from corrosive action between dissimilar metals while reducing installed costs. • Warranty - 3 year limited tank warranty. 1 year limited parts warranty. (See warranty for details) Explosion-Resistant Element • Thermostat Enclosure - moisture-tight and explosion resistant. • Large Terminal Enclosure - for easy access, cool terminations and simple installation. • Rugged High Conductivity Elements - compacted MgO for maximum efficiency and durability • Complies with NEC Class I (Groups C, D) Class II (Groups E,F,G) Class III • Complies with U.L. Standard 886 • Enclosure meets NEMA requirements for hazardous atmosphere (consult factory for specific applications) Junior Models Model Number Junior Models RJC006E RJC012E RJC020E Tall Models RTA030K RTA040K RTA052K-T RTA052K RTA066K RTA082K RTA120K Short Models RSA030K RSA040K RSA050K Tall & Short Models Outlet T&P Inlet 8" B Short Series Have Optional Side T & P Valve Tapping Note: Diagram above depicts optional double element availability. (Short and Tall models only). T&P (Optional) Gallon Capacity A B D Shipping Weight 6 12 19 16-1/2” 27-3/4” 24-3/4” 14” 14” 18” 10-1/4” 21-1/4” 18-1/4” 43 58 69 30 40 50 50 65 80 119 47” 47” 57-1/2” 46-1/2” 59-1/4” 59” 63-3/4” 18” 20” 20” 22” 22” 24” 28” – – – – – – – 95 113 133 140 166 193 315 30 40 50 29-3/4” 31-3/4” 31-3/4” 22” 24” 26” 24” 24-1/4” 24-1/4” 106 135 163 Notes: Water connections are 3/4” NPT on all models. Standard for Short and Tall models: 4500 watts, 240V 1ø. Junior models: 1500 watts, 120V 1ø. 6" D A VOLTAGE SCHEDULE C – 120V 1ø J – 208V 1ø A – 240V 1ø X – 480V 1ø Six Way Shelf Mounting - For six and twelve gallon models only. (JKT 3004) WATTAGE SCHEDULE E – 1500 K – 4500 P – 6000 27 Space-Saver Electric Boosters BACK SIDE B C F FRONT OUTLET RELIEF VALVE A E INLET D Electrical Connection From either side (6-18), left side (24-58) or from bottom (all models) Model Number kW SB*006 SB*009 SB*012 SB*015 SB*018 SB*024 SB*030 SB*036 SB*045 SB*054 SB*058 6 9 12 15 18 24 30 36 45 54 58 Recovery (GPH @) 40°F 70°F 62 93 124 155 186 248 310 372 465 558 600 35 53 71 89 106 142 177 213 266 316 343 Btu/hr Input 20,478 30,717 40,956 51,195 61,434 81,912 102,390 122,868 153,585 184,302 198,128 A 13-3/4” 13-3/4” 13-3/4” 13-3/4” 13-3/4” 12” 12” 12” 12” 12” 12” B 20-3/4” 20-3/4” 20-3/4” 20-3/4” 20-3/4” 24” 24” 24” 24” 24” 24” C D E F 13” 13” 13” 13” 13” 18” 18” 18” 18” 18” 18” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 2” 2” 2” 2” 2” 2” 11-1/2” 11-1/2” 11-1/2” 11-1/2” 11-1/2” 10” 10” 10” 10” 10” 10” 6-1/2” 6-1/2” 6-1/2” 6-1/2” 6-1/2” 8” 8” 8” 8” 8” 8” Weight 118 118 118 118 118 158 158 158 158 158 158 Notes: * Indicates voltage. 6 and 9 kW models wired for 1ø or 3ø operation in 208 or 240 volt. Six (6) gallon capacity for all models. Outlets and inlets are 8” center-to-center. Water connections are all 3/4” NPT. Amperage Draw Model No. kW Sizing Guide Single Phase 208V 240V SB*006 6 29 SB*009 9 43 SB*012 12 58 SB*015 15 72 SB*018 18 83 SB*024 24 116 SB*030 30 144 SB*036 36 173 SB*045 45 216 SB*054 54 259 SB*058 58 279 Indicates Voltage * 25 38 50 63 72 100 125 150 188 229 242 Three Phase 208V 240V 480V 25 38 33 42 48 67 83 100 125 150 161 Voltage Schedule J – 208V K – 208V T – 208V A – 240V B – 240V P – 240V X – 480V 1ø 3ø 1ø or 3ø 1ø 3ø 1ø or 3ø 3ø 22 33 29 36 42 58 72 87 109 130 141 11 16 14 18 21 29 36 43 54 65 71 Dishwashing Machine Classification Booster Model No. 40° F Rise 16” x 16” Single Tank (69 GPH) Stationary Rack, Door SB*009 18” x 18” Single Tank (87 GPH) Stationary Rack, Door SB*009 20” x 20” Single Tank (104 GPH) Stationary Rack, Door SB*012 Multiple Tank (277 GPH) Conveyor, Dishes inclined SB*030 Multiple Tank (347 GPH) Conveyor, Dishes flat SB*036 Single Tank (416 GPH) Conveyor SB*045 Note: Maximum water pressure 20 psi for proper operation. Booster Model No. 70° F Rise SB*012 SB*015 SB*018 SB*054 (2) SB*030 (2) SB*036 Standard Features • Adjustable Thermostat—for operation at 180°F • Pilot Switch—turns unit off when dishwasher is not in use for maximum energy savings • Under-Counter Design—saves valuable floor space • Installation Flexibility—use with standard 6” adjustable legs or under-counter, slide-out mounting (available upon request) • Wide Range of Capacities—to meet the requirements of even the largest commercial dishwashers • Durable Cement-Lined, Steel Tank—for longer life • Heavy Duty Construction—pressure tested to 300 psi and approved for 150 psi working pressure • Low Watt Density Elements—copper-sheathed, tin-coated design rated at 75 watts/in2 • Pilot Indicator Light and High Limit Control— for safe, economical operation • Built-In Temperature-Pressure Gauge • Pressure Reducing Valve with Bypass Check • ASME Temperature and Pressure Relief Valve • Stainless Steel Jacket • Full Blanket of Insulation • Magnesium Anode Rod—inhibits corrosion • Instantaneous Response—no temperature lag, no standby losses • Economical Operation • Hinged Access Door—for easy servicing and adjustment of electric controls • 120 Volt Circuit Control • Low Water Cut-Off • 3 Year Limited Tank Warranty • 1 Year Limited Parts Warranty (See warranty for details) Optional Equipment • Slide-Out Mounting Bracket for Under-Counter Installation • Stainless Steel Legs • 3/4” Shock Absorber (water hammer arrestor) 28 Lock-Temp® Round Jacketed Storage Tanks Standard Features • • • • • Energy Saving Performance - meet the requirements of the latest ASHRAE Energy Efficiency Standards. Five-Year Limited Warranty - against tank failure resulting from defects in materials or workmanship. Lock-Temp Baffle - creates nearly perfect stratification. Magnesium Anode - provide additional protection against corrosion. ASME Construction - in accordance with ASME standards and labeled for 125 psi working pressure (standard) or 150 psi working pressure (optional). (RJS080 & RJS120 are non-ASME construction) • Galvanized Jacket - Heavy gauge jacket is and finished in durable acrylic enamel combining attractive appearance with maximum protection. Vertical Round Jacketed Glass Lined Tanks Model Gal. Number Cap. A B D Shipping Weight 125 psi 150 psi E RJS080 78 58-3/4” 24” 9-1/4” 14-1/4” - 192 RJS120 119 62-1/2” 28” 9-1/2” 14-1/2” - 345 RJA120 119 62-1/2” 28” 9-1/2” 14-1/2” - 365 RJA175 175 67-1/4” 32” 11-1/4” 17-1/4” - 525 RJA200 200 77-1/4” 32” 11-1/4” 17-1/4” - 600 500 Gallon Jacketed Tank. Glass Lined Only Vertical Round Jacketed ASME Tanks Model Gal. Number Cap. A B R*A0257 257 91” R*A0318 318 R*A0432 Shipping Weight 125 psi 150 psi D E 34” 18” 26” 1,108 1,108 80” 40” 19-1/2” 27-1/2” 1,290 1,290 432 80” 46” 21” 29” 1,512 1,626 R*A0504 504 92” 46” 21” 29” 1,623 1,765 R*A0650 650 92” 52” 23-1/2” 31-1/2” 1,911 1,911 R*A0752 752 104” 52” 23-1/2” 31-1/2” 2,330 2,330 R*A0940 940 128” 52” 23-1/2” 31-1/2” 3,010 3,010 * Indicates tank lining. G=Glass Lined C=Cement MANWAY IS STANDARD ON CEMENT TANKS. Horizontal Round Jacketed ASME Tanks Model Number Gallon Capacity A B R*A0250H 250 41” 88” 34” 1,157 1,157 R*A0300H 300 47” 76” 40” 1,355 1,355 R*A0400H 400 53” 76” 46” 1,587 1,701 R*A0500H 500 53” 88” 46” 1,711 1,853 R*A0600H 600 59” 88” 52” 2,053 2,053 R*A0700H 700 59” 100” 52” 2,399 2,399 R*A1000H 1000 59” 124” 52” 3,114 3,114 * Indicates tank lining. G=Glass Lined C=Cement Shipping Weight Diameter 125 psi 150 psi MANWAY IS STANDARD ON CEMENT TANKS. 29 Lock-Temp® Square Jacketed Storage Tanks Standard Features • Energy Saving Performance - meet the requirements of the latest ASHRAE Energy Efficiency Standards. • Five-Year Limited Warranty - against tank failure resulting from defects in materials or workmanship. • Lock-Temp Baffle - creates nearly perfect stratification. • Magnesium Anode - provide additional protection against corrosion. • ASME Construction - in accordance with ASME standards and labeled for 125 psi working pressure (standard) or 150 psi working pressure (optional). • Galvanized Jacket - Heavy gauge jacket is and finished in durable acrylic enamel combining attractive appearance with maximum protection. • Built-In Safety Drain Pan System - Sealed base assembly with 3/4 ” drain connection to protect against water damage from gasket or component leakage. • Channel Iron Skid - Square jacket models furnished with skid for easy handling and installation. Vertical Square Jacketed ASME Tanks Model Gal. Number Cap. A B D E Shipping Weight 125 psi 150 psi TV*1250J 1250 132-1/2” 64-1/2” 29-1/4” 21-1/4” 4,660 5,000 TV*1500J 1500 128 1/2” 70-1/2” 31-3/4” 25-3/4” 6,200 6,637 TV*2000J 2000 140-1/2” 76-1/2” 33-1/2” 25-1/2” 7,400 7,910 TV*2500J 2500 146-1/2” 82-1/2” 35-1/4” 28” 9,632 * Indicates tank lining. G=Glass Lined 9,000 C=Cement MANWAY IS STANDARD ON CEMENT TANKS. Horizontal Square Jacketed ASME Tanks Model Number Gallon Capacity A B Shipping Weight Depth 125 psi 150 psi TH*1250J 1250 68-1/2” 130-1/4” 60-1/4” 5,126 5,466 TH*1500J 1500 77 1/2” 126-1/4” 66-1/4” 6,820 7,257 TH*2000J 2000 80-1/2” 138-1/4” 72-1/4” 8,140 8,650 TH*2500J 2500 86-1/2” 144-1/4” 78-1/4” 9,900 10,532 * Indicates tank lining. G=Glass Lined C=Cement MANWAY IS STANDARD ON CEMENT TANKS. 30 Lock-Temp® Bare Storage Tanks Gal. D Cap. Dia. 118 24” 141 24” 188 24” 235 24” 175 28” 200 28” 147 30” 184 30” 220 30” 257 30” 294 30” 367 30” 265 36” 318 36” 370 36” 423 36” 528 36” 432 42” 504 42” 576 42” 720 42” 864 42” 1,008 42” 658 48” 752 48” 940 48” 1,128 48” 1,315 48” 1,503 48” 951 54” 1,189 54” 1,427 54” 1,665 54” 1,903 54” 2,141 54” 1,469 60” 1,763 60” 2,056 60” 2,350 60” 2,644 60” 2,115 72” 2,538 72” 2,961 72” 3,384 72” 3,807 72” Dimensions V H Ht. Lgth. 64” 76” 100” 124” 65” 76” 52” 48” 64” 60” 76” 72” 87” 83” 100” 96” 124” 120” 64” 60” 76” 72” 87” 83” 100” 96” 124” 120” 76” 72” 88” 84” 100” 96” 124” 120” 148” 144” 172” 168” 88” 84” 100” 96” 124” 120” 148” 144” 172” 168” 196” 192” 100” 96” 124” 120” 148” 144” 172” 168” 196” 192” 220” 216” 124” 120” 148” 144” 172” 168” 196” 192” 220” 216” 124” 120” 148” 144” 172” 168” 196” 192” 220” 216” Weights Glass-Lined Cement 125 psi 150 psi Lined 368 368 428 428 556 556 684 684 353 353 488 400 400 695 468 468 812 548 548 958 628 628 1,103 701 701 1,242 868 868 1,540 577 577 995 673 673 1,173 770 770 1,343 866 866 1,513 1,058 1,058 1,861 795 909 1,385 908 1,050 1,587 1,020 1,190 1,790 1,245 1,470 2,195 1,470 1,751 2,601 1,695 2,031 3,006 1,346 1,346 2,124 1,507 1,507 2,392 1,828 1,828 2,918 2,150 2,150 3,444 2,471 2,471 3,970 2,793 2,793 4,505 1,721 1,972 2,729 2,083 2,423 3,320 2,451 2,881 3,919 2,807 3,326 4,511 3,168 3,777 5,102 3,530 4,228 5,701 2,784 3,221 4,177 3,267 3,823 4,913 3,749 4,425 5,658 4,231 5,026 6,394 4,713 5,628 7,130 3,416 3,904 5,104 3,995 4,627 5,995 4,575 5,350 6,885 5,154 6,073 7,767 5,733 6,795 8,658 Tappings A 13-1/2” 13-1/2” 13-1/2” 13-1/2” 11” 11” 15-3/4” 15-3/4” 15-3/4” 15-3/4” 15-3/4” 15-3/4” 17-1/2” 17-1/2” 17-1/2” 17-1/2” 17-1/2” 18-3/4” 18-3/4” 18-3/4” 18-3/4” 18-3/4” 18-3/4” 20-3/4” 20-3/4” 20-3/4” 20-3/4” 20-3/4” 20-3/4” 22-3/4” 22-3/4” 22-3/4” 22-3/4” 22-3/4” 22-3/4” 24-3/4” 24-3/4” 24-3/4” 24-3/4” 24-3/4” 27-3/4” 27-3/4” 27-3/4” 27-3/4” 27-3/4” B 21-1/2” 21-1/2” 21-1/2” 21-1/2” 17” 17-1/2” 23-3/4” 23-3/4” 23-3/4” 23-3/4” 23-3/4” 23-3/4” 25-1/2” 25-1/2” 25-1/2” 25-1/2” 25-1/2” 26-3/4” 26-3/4” 26-3/4” 26-3/4” 26-3/4” 26-3/4” 28-3/4” 28-3/4” 28-3/4” 28-3/4” 28-3/4” 28-3/4” 30-3/4” 30-3/4” 30-3/4” 30-3/4” 30-3/4” 30-3/4” 32-3/4” 32-3/4” 32-3/4” 32-3/4” 32-3/4” 35-3/4” 35-3/4” 35-3/4” 35-3/4” 35-3/4” C 29-1/2” 29-1/2” 29-1/2” 29-1/2” 16” 16” 31-3/4” 31-3/4” 31-3/4” 31-3/4” 31-3/4” 31-3/4” 33-1/2” 33-1/2” 33-1/2” 33-1/2” 33-1/2” 34-3/4” 34-3/4” 34-3/4” 34-3/4” 34-3/4” 34-3/4” 36-3/4” 36-3/4” 36-3/4” 36-3/4” 36-3/4” 36-3/4” 38-3/4” 38-3/4” 38-3/4” 38-3/4” 38-3/4” 38-3/4” 40-3/4” 40-3/4” 40-3/4” 40-3/4” 40-3/4” 43-3/4” 43-3/4” 43-3/4” 43-3/4” 43-3/4” 24” DIAMETER TANKS (28” only) 4” (on 30”+) MANWAY IS STANDARD ON CEMENT TANKS. 28” DIAMETER AND LARGER TANKS 31 Hot Water Generators Water to Water & Steam to Water Vertical Tanks NOTE: Unit shown with optional water-to-water control package Horizontal Tanks Steam to Water Optional Control Package Left hand or right hand configurations available. Water to Water Optional Control Package 32 Hot Water Generators Vertical and Horizontal Models Vertical Tanks Round Jacketed Model Number GV*0200JR GV*0257JR GV*0318JR GV*0432JR GV*0504JR GV*0650JR GV*0752JR GV*0940JR Gallon Capacity 200 257 318 432 504 650 752 940 A 77-1/4” 92” 82” 82” 92” 93” 105” 129” * Indicates Tank Lining – G=Glass C 32” 34” 40” 46” 46” 54-1/2” 54-1/2” 54-1/2” D 11-1/4” 18” 19-1/2” 21” 21” 23-1/2” 23-1/2” 23-1/2” E 17-1/4” 26” 27-1/2” 29” 29” 31-1/2” 31-1/2” 31-1/2” C=Cement Maximum Coil Length 30” 36” 42” 48” 48” 54” 54” 54” Shipping Weight 600 902 993 1269 1373 1966 2030 2376 . Horizontal Tanks Round Jacketed Model Gallon Number Capacity GH*250JR 250 GH*300JR 300 GH*400JR 400 GH*500JR 500 GH*600JR 600 GH*700JR 700 GH*1000JR 1000 A 41” 47” 53” 53” 59” 59” 59” B 88” 76” 76” 88” 88” 100” 124” C 34” 40” 46” 46” 52” 52” 52” Maximum Coil Length 84” 72” 72” 84” 84” 96” 120” Minimum Shipping Coil Length Weight 54” 1,600 48” 1,800 48” 2,250 54” 2,500 54” 3,600 66” 4,200 78” 5,000 NOTE: Manway required on tanks with tube bundles 48” and longer. * Indicates Tank Lining – G=Glass C=Cement Non-Jacketed Tanks Model GV*147 GV*184 GV*220 GV*257 GV*294 GV*367 GV*265 GV*318 GV*370 GV*423 GV*528 GV*432 GV*504 GV*576 GV*720 GV*864 GV*658 GV*752 GV*940 GV*1128 GV*951 GV*1189 GV*1427 GV*1469 GV*1763 GV*2115 GV*2538 Gallon Capacity 147 184 220 257 294 367 265 318 370 423 528 432 504 576 720 864 658 752 940 1,128 951 1,189 1,427 1,469 1,763 2,115 2,538 Length** Diameter (Height) (Width) 48” 30” 60” 30” 72” 30” 84” 30” 96” 30” 120” 30” 60” 36” 72” 36” 84” 36” 96” 36” 120” 36” 72” 42” 84” 42” 96” 42” 120” 42” 144” 42” 84” 48” 96” 48” 120” 48” 144” 48” 96” 54” 120” 54” 144” 54” 120” 60” 144” 60” 120” 72” 144” 72” D 15 3/4” 15 3/4” 15 3/4” 15 3/4” 15 3/4” 15 3/4” 17 1/2” 17 1/2” 17 1/2” 17 1/2” 17 1/2” 18 3/4” 18 3/4” 18 3/4” 18 3/4” 18 3/4” 20 3/4” 20 3/4” 20 3/4” 20 3/4” 22 3/4” 22 3/4” 22 3/4” 24 3/4” 24 3/4” 27 3/4” 27 3/4” Note: Change “V” to “H” for Horizontal Configuration * Indicates Tank Lining G= Glass C=Cement **Add 4” to Length (Height) for Vertical Configuration E 23 3/4” 23 3/4” 23 3/4” 23 3/4” 23 3/4” 23 3/4” 25 1/2” 25 1/2” 25 1/2” 25 1/2” 25 1/2” 26 3/4” 26 3/4” 26 3/4” 26 3/4” 26 3/4” 28 3/4” 28 3/4” 28 3/4” 28 3/4” 30 3/4” 30 3/4” 30 3/4” 32 3/4” 32 3/4” 35 3/4” 35 3/4” Maximum Minimum Maximum Coil Length Coil Length Coil Length Shipping (Horizontal) (Horizontal) (Vertical) Weight 36” 30” 36” 400 48” 42” 36” 468 60” 48” 36” 548 72” 54” 36” 628 84” 66” 36” 701 108” 78” 36” 868 48” 42” 42” 577 60” 48” 42” 673 72” 54” 42” 770 84” 66” 42” 866 108” 78” 42” 1,058 60” 48” 48” 909 72” 54” 48” 1,050 84” 66” 48” 1,190 108” 78” 48” 1,470 120” 96” 48” 1,751 72” 54” 54” 1,346 84” 66” 54” 1,507 108” 78” 54” 1,828 120” 96” 54” 2,150 84” 66” 60” 1,972 108” 78” 60” 2,423 120” 96” 60” 2,881 108” 78” 66” 3,221 120” 96” 66” 3,823 108” 78” 78” 3,904 120” 96” 78” 4,627 33 SquireTM Indirect Water Heater Models The Squire uses the power and efficiency of the boiler that heats the home to generate domestic hot water for showers, dishwashing, clothes washing…any hot water demand required. The efficiency of the boiler used to heat the home can be as much as 20% higher than a direct-fired tank-type water heater. So why not use that efficiency to “indirectly” provide hot water for all domestic applications. Standard Features • • • • • • • Durable Rustproof Jacket Large Capacity 444L Passivated Stainless Steel Tank High Output 304 Stainless Steel Heat Exchanger Coil 5 Different Models and Sizes Maintenance-Free Operation Energy Efficient Operation Limited Lifetime Warranty TOP VIEW Dimensions Model SSS031 SSS041 SSS051 SSS081 SSS119 A 38-3/4” 54-3/4” 47-3/4” 68-3/4” 64-3/4” B 20” 20” 24” 24” 29” D 32-3/4” 48” 40-1/4” 62-3/4” 58-3/4” E 32-3/4” 48” 39-3/4” 59-1/2” 52-1/2” F 27” 29-1/4” 30” 34-1/2” 44-1/2” G 22” 25-1/4” 26” 29-1/2” 40-3/4” H 9-1/2” 9-1/2” 10” 10-3/4” 12-1/4” Domestic Water Shipping I Conn. Weight 2-1/4” 1” 60 2-1/4” 1” 80 2” 1” 105 2” 1-1/2” 205 2” 1-1/2” 220 Pressure Drop Ft. Hd 0.8 1.8 1.8 4.9 11.5 Continuous Rate (GPH) 140°F 115°F 132 183 196 271 196 271 292 404 392 542 Note: Heat Exchanger connections are 1” male NPT Specifications Model SSS031 SSS041 SSS051 SSS081 SSS119 Gallon Capacity 27 40 52 80 117 First Hour Rate (Gallons) 140°F 115°F 154 204 228 303 238 313 356 468 485 636 Max Coil Load BTU/hr 99,000 146,900 146,900 218,600 293,700 Flow Rate GPM 4.6 6.9 6.9 10.4 13.6 Note: Based on incoming cold water temperature of 50°F and boiler water temperature of 200°F. 34 Energy Saver Indirect Models Make your money work for you! By choosing an Energy Saver Indirect Water Heater, the same energy spent to hydronically heat your home can heat your domestic hot water. The Energy Saver Indirect Water Heater is a smart answer to the question of how to keep your fuel costs down. The Energy Saver Indirect is an indirect-fired, potable water storage vessel. It accepts heat from an external heat source, such as a Solution or KNIGHT Heating Boiler. By sharing heat for two purposes, efficiency results. Standard Features • • • • • • • • • Non-CFC Foam Insulation Glass-Lined Steel Tank Large Capacity Glass Lined Heat Exchanger Coil Aluminum Tank Saver Anode Rods Dielectric Nipples Adjustable Aquastat Temperature and Pressure Relief Valve Brass Drain Valve Warranty Model EGS030 EGS040T EGS050T EGS065 EGS080 EGS120 Notes: Gal. Cap. 30 40 50 60 75 116 1st Hour Rating @140°F 204 210 217 223 234 261 1st Hour Rating @115°F 313 320 326 333 343 370 A 33-3/4” 41-1/4” 46-1/4” 59-1/4” 59” 62-1/2” B 22” 22” 22” 22” 24” 28-1/4” D 27-1/2” 27-1/2” 27-1/2” 27-1/2” 27-1/2” 28-1/4” E 5-1/4” 5-1/4” 5-1/4” 5-1/4” 5-1/4” 6-1/4” F 11-1/2” 11-1/2” 11-1/2” 11-1/2” 11-1/2” 11-1/2” Shipping Weight 140 176 189 196 224 355 All water connections are 3/4” NPT on 8” centers. Aquastat, relief valve, and drain valve connections are 3/4” NPT. All heat exchanger connections are 1” NPT. All ratings are based on 180°F boiler water temperature, 50°F potable water inlet temperature and an approximate boiler output of 220,000 Btu/Hr. 35 Residential Electric Models Tall & Short Models Standard Features • All models meet or exceed the NAECA & ASHRAE Energy Efficiency Standards • Non-CFC Foam Insulation - reduces standby heat loss • Immersion Type Heating Elements - tin-coated, copper sheath design for longer life in hard, aggressive water • Screw-In Element Mounting - for easy replacement and service • Adjustable Thermostat and Automatic Overheat Safety Limit for accurate, easy control of water temperature and safe operation • Glass-lined Steel Tank - fused to the interior of the tank to assure a long life providing clean, clear hot water • Magnesium Tank Saver Anode - high capacity anode provides protection from the effects of electrolytic corrosion • Dielectric Nipples - provides an extra measure of tank protection and piping convenience • Temperature & Pressure Relief Valve - included • Heat Traps - Factory installed, minimizes heat loss through piping. • Relief Valve Tapping - top/center location for installation flexibility and convenience • Brass Drain Valve • Warranty - 6 or 10 year limited tank warranty Six year warranty on parts (See warranty for details) Optional Features VOLTAGE SCHEDULE C – 120V 1ø J – 208V 1ø A – 240V 1ø • Voltages Available—120, 208, 240 volts For 277, 380, 415 & 480 volts, and simultaneous thermostat operation see EX Special Electric Water Heaters Model Gallon Input 1st Hr. Energy Number Capacity Watts (Gal.) Factor Tall Models LTA030KK 30 4500 43 0.93 LTA040KK 40 4500 53 0.92 LTA052KK-T 50 4500 63 0.90 LTA052KK 50 4500 59 0.90 LTA066KK 65 4500 72 0.88 LTA082KK 80 4500 87 0.87 LTA120KK 119 4500 105 0.84 Short Models LSA030KK 30 4500 40 0.93 LSA040KK 40 4500 47 0.92 LSA050KK 47 4500 52 0.90 High Efficiency Models LTA041KK LTA051KK LTA065KK LTA081KK 40 50 65 80 4500 4500 4500 4500 53 63 72 87 0.93 0.93 0.91 0.91 Notes: 3/4” NPT water connections. Change “L” to “X” for 10 year limited warranty model. Standard Voltage and Wattage: 240v – 4500w. A B D 47” 47” 57-1/2” 46-1/2” 59-1/4” 59” 63-3/4” 18” 20” 20” 22” 22” 24” 28” - 90 7 9 11 14 16 18 21 23 28 100 6 8 10 12 14 17 19 21 25 Shipping Weight 85 103 123 130 156 183 305 29-3/4” 22” 31-3/4” 24” 31-3/4” 26” 24” 96 24-1/2” 125 24-1/2” 153 48” 47-1/2” 61-1/4” 60” - 20” 22” 22” 24” RECOVERY RATE (GPH @ °F RISE) ELEMENT WATTAGE 40 50 60 70 80 E 1500 16 12 10 9 8 F 2000 21 17 14 12 10 G 2500 26 21 17 15 13 H 3000 31 25 21 18 16 J 3500 36 29 24 21 18 L 4000 41 33 28 24 21 K 4500 47 37 31 27 23 M 5000 52 41 34 30 26 P 6000 62 50 41 35 31 109 136 162 189 T&P OUTLET INLET OPTIONAL T&P 8" B Short Series Have Optional Side T & P Valve Tapping D A 36 Junior Electric Models 2 gallon models 6 - 30 gallon models VOLTAGE SCHEDULE C – 120V 1ø J – 208V 1ø A – 240V 1ø Model Number JRCOO2E* JRC006E JRC012E JRC020E JRC031E Gal. Cap. 2 6 12 19 30 A 12-1/4” 16-1/2” 27-3/4” 24-3/4” 30” B 10” 14” 14” 18” 22” D 13-1/4” 10-1/4” 21-1/4” 18-1/4” 23-1/2” E 13-1/4” 3” 3” 3” 4-1/2” Shipping Weight 14 33 48 59 82 Notes: Standard wattage and voltage: 1500w / 120v. Water connections are 3/4” NPT. Maximum wattage for 6 and 12 gallon is 3000w. Maximum wattage for 19 and 30 gallon is 6000w. * 2 gallon is available in 1500w / 120v only. For 277v 1ø and 480v 1ø, see Light Duty Commercial Electric Water Heaters Six Way Shelf Mountings – 2, 6 and 12 Gallon Models Only. (Part number JKT 3004) WATTAGE SCHEDULE E – 1500 F – 2000 G – 2500 H – 3000 J – 3500 L – 4000 K – 4500 M – 5000 P – 6000 NOTE: Max wattage @120V is 3000W. 37 Residential Gas Models Natural Gas LP Gas Model Gal. Input GPH @ Input GPH @ Energy Number Cap. Btu/Hr 90°F Rise Btu/Hr 90°F Rise Factor A B Energy Saver Series - Short Models LSN030G 30 30,000 31 26,000 27 0.61 45-3/4” 18” LSN041G 40 40,000 41 38,000 39 0.59 47-1/4” 20” Energy Saver Series - Tall Models LTN030G 30 32,000 33 31,000 32 0.61 56-1/4” 16” LTN040G 40 34,000 35 34,000 35 0.59 56-1/2” 18” LTN041G 40 40,000 41 38,000 39 0.59 57-1/4” 18” LTN050G 50 40,000 42 36,000 38 0.58 57” 20” LTN065G†* 65 65,000 68 63,000 66 0.55 59-3/4” 24” ETN076† 75 76,000 82 76,000 82 N/A 59” 24” ETN100†* 100 85,000 92 88,000 95 N/A 65” 28-1/4” High Input Models LTN040G-4 40 50,000 53 48,000 50 0.59 57-1/2” 18” LTN050G-4 50 50,000 53 48,000 50 0.58 56” 20” LTN051G†* 48 65,000 67 61,000 63 0.58 56” 22” High Efficiency Models LTN030G-EF 30 32,000 34 31,000 33 0.62 56-1/4” 18” LTN040G-EF 40 40,000 43 36,000 38 0.62 58-1/4” 20” LTN050G-EF 50 40,000 43 36,000 38 0.62 58-1/4” 22” Ultra Low NOx Series - 6 Year Limited Warranty USN030G 30 30,000 31 0.61 45-1/2” 18” USN041G 40 40,000 42 0.59 47-1/2” 20” USN050G 48 40,000 42 0.58 47” 22” UTN030G 30 32,000 33 0.61 56-1/4” 16” UTN041G 40 40,000 42 0.59 57-1/4” 18” UTN050G 50 40,000 42 0.58 56-3/4” 20” High-Efficiency Models Ultra Low NOx Series - 6 Year Limited Warranty UTN030G-EF † 30 32,000 34 0.62 56-1/4” 18” UTN040G-EF † 40 40,000 43 0.62 56-1/2” 20” UTN050G-EF † 50 40,000 43 0.62 57” 22” High Input Models Ultra Low NOx Series - 6 Year Limited WarrantyUTN040G-4 40 50,000 53 0.59 57-1/2” 18” UTN050G-4 50 50,000 53 0.59 56” 20” D F G 48-1/2” 38-3/4” 13” 50” 41” 13” - 59-1/4” 59-1/2” 61” 59-3/4” 63” 62-1/2” 68-3/4” E 49-3/4” 50” 50” 50” 53-1/2” 51-3/4” 59-1/4” WaterVent Ship. Conn. Size Wt. H I - 8” 8” 3/4” 3/4” 3” 3” 100 128 13” 8” 13” 8” 13” 8” 13” 8” 12-1/4” 13-1/2” 53-1/2” 11” 15” 16-1/2” 51-3/4” 11” 15-3/4” 17-3/4” 50-3/4” 16” 3/4” 3/4” 3/4” 3/4” 3/4” 1” 1-1/4” 3” 3” 3” 3” 4” 4” 4” 105 120 121 145 202 238 420 8” 8” 11” 3/4” 3/4” 3/4” 4” 4” 4” 127 150 164 60-3/4” 51-1/2” 13” 58-1/2” 50” 13” 59-1/4” 50” 13” 13-1/2” 50” 58” 60” 60” 49-3/4” 13” 51-1/2” 13” 50” 13” - - 8” 8” 8” 3/4” 3/4” 3/4” 3” 3” 3” 114 128 157 48-1/2” 50” 49-3/4” 59-1/4” 61 59-3/4” 38-3/4” 41” 40-1/2” 49-3/4” 50” 50” - - - 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3” 3” 3” 3” 3” 3” 110 137 163 113 137 154 59-1/4” 49-3/4” 13” 59-1/2” 50” 13” 59-3/4” 50” 13” - - - 3/4” 3” 3/4” 3” 3/4” 3” 123 137 160 60-3/4” 51-1/2” 11-3/4” 58-1/2” 50” 11-3/4” - - - 3/4” 4” 3/4” 4” 137 160 11-3/4” 11-3/4” 11-3/4” 11-3/4” 11-3/4” 11-3/4” Notes: “N” indicates Natural gas, replace “N” with “L” to indicate LP gas model. All gas connections are 1/2” NPT † Indicates models equipped with side tappings for space heating applications. * Indicates models with 2” of foam insulation (ETN076 has 1 1/4” insulation) Models fired above 75,000 Btu/Hr are certified to ANSI Z21.10.3. and are not required to meet the NAECA or FVIR standard. Performance data is based on manufacturer’s test results. Standard Features · All Models Meet or Exceed the NAECA & ASHRAE Energy Efficiency Standards · Shield Combustion System · Piezo Ignitor · Sight Glass · Temperature & Pressure Relief Valve · · · · · · Low NOx Burner Magnesium Tank Saver Anode Adjustable Thermostat Non-CFC Foam Insulation Heat Traps (not avaialable ETN076 & ETN100) Glass-Lined Steel Tank · Dielectric Nipples · Side Connections for Space Heating (Select Models) · Brass Drain Valve · Six or Ten Year Limited Tank Warranty · Six Year Warranty on Parts 38 Power-Vented FVIR Gas Models TOP VIEW Model Number LVN041G LVN051G LVN052G†* LVN065G†* Gal. Cap. 40 50 48 65 EF 0.62 0.62 0.65 0.65 Natural Gas Btu/hr GPH @ Input 90°F Rise 40,000 43 40,000 43 67,000 70 70,000 70 LP Gas Btu/hr GPH @ Input 90°F Rise 38,000 41 38,000 41 60,000 65 63,000 68 Notes: Replace “N” with “L” to indicate LP gas model † Indicates side tapping for space heating. *Indicates models with 2” of polyurethane foam insulation. Performance data is based on manufacturer test results. A 46-1/2” 47-1/4” 56-1/2” 59-1/2” B 20” 22“ 22“ 24“ C 25” 26-3/4” 26-3/4” 26-3/4” D 56-1/2” 57-1/2” 66” 69” E 40-1/2” 41” 50-1/4” 53-1/2” F 11-3/4” 11-3/4” 11-3/4” 11-3/4” Vent Ship. Size Wt. 2” 140 2” 165 13-1/2” 50-1/4” 3” 180 13-1/2” 53-1/2” 3” 185 G H “L” prefix indicates 6 year tank warranty. All water connections are 3/4” NPT. All gas connections are 1/2”. Standard Features · Shield Combustion System - Corrosion resistant chamber redirects air through a stainless steel flame arrestor plate to prevent flame rollout and flammable vapor ignition. A resettable thermal switch shuts down the burner and pilot operation in the event of a flammable vapor ignition and also protects against lint, dust and oil buildup by shutting down when it detects significant air restriction. · Power Vented Exhaust System - The 120 VAC blower fan exhausts the byproducts of combustion directly to the outside the building through PVC style pipe, eliminating the need for conventional chimneys or roof penetrations. · Side Wall or Vertical Venting - can be vented horizontally with 2”, 3” or 4” PVC or CPVC vent pipe, depending on the model. (See vent chart for max. vent lengths) · Electronic Spark Ignition - Eliminates nuisance pilot outages and saves fuel by eliminating the continuously burning pilot, while providing solid-state ignition. · Low NOx Burner - This whisper quiet, 360° burner incorporates aluminized steel into its die-formed design. The large burner diameter transfers more heat, while providing clean and efficient combustion. Satisfies local codes and emissions standards. · Non-CFC Foam Insulation - This non-CFC polyurethane closed cell foam minimizes standby losses and maximizes heat retention. · Glass-Lined Steel Tank - The tank is automatically formed, rolled, and welded to ensure a continuous seam for the glass lining. The durable glass lining is fused to the interior of the tank at 1600°F to assure lasting protection against rust and corrosion while providing clean hot water. · Magnesium Tank Saver Anode - High capacity anode rod provides protection from the effects of electrolytic corrosion. · Electronic Thermostat - This accurate control provides an easy way to reset water temperature for best economy. Automatic over-heat safety device is standard. LED status indicator simplifies setup and adjustments. · Heat Trap Nipples - Factory installed waterways reduce heat loss in piping, while providing piping convenience. · Side Connections for Space Heating - select models are equipped with side tappings for space heating applications. · Temperature & Pressure Relief Valve · Brass Drain Valve · Warranty - Six or Ten year limited tank warranty. Six year warranty on parts. (See warranty for details) Max. Vent Length (Total equiv. feet) LVN041G LVN051G LVN052G LVN065G 2” 3” 4” 50’ 50’ - 120’ 120’ 60’ 60’ 180’ 180’ 39 Power-Vented Gas Models H D B A E G F Model Gal. Number Cap. LVN076 75 Natural Gas LP Gas Btu/hr GPH @ Btu/hr GPH @ Input 90°F Rise Input 90°F Rise 76,000 82 75,100 82 Notes: Replace “N” with “L” to indicate LP gas model . All gas connections are 1/2”. This model is certified to ANSI Z21.10.3 A 59” B 26” D E 68-1/2” 51-3/4” F 14” G H 16-3/4” 31” Vent Ship. Size Wt. 3” 246 “L” prefix indicates 6 year tank warranty. All water connections are 3/4” NPT. This model is not required to meet the NAECA or FVIR standard. Standard Features · Power Vented Exhaust System - The 120 VAC blower fan exhausts the by-products of combustion directly to the outside the building through PVC style pipe, eliminating the need for conventional chimneys or roof penetrations. · Side Connections for Space Heating · Non-CFC Foam Insulation - Improved models are equipped with side tappings formulation provides uniform tank coverage for space heating applications. with a thick blanket of insulating foam. This non-CFC polyurethane closed cell foam · Temperature & Pressure Relief Valve minimizes standby losses and maximizes · Brass Drain Valve heat retention. · Side Wall Venting - can be vented horizontally with 3” or 4” PVC or CPVC vent pipe, depending on the model. (See vent chart for max. vent lengths) · Glass-Lined Steel Tank - The tank is automatically formed, rolled, and welded to ensure a continuous seam for the glass lining. The durable glass lining is fused to the interior of the tank at 1600°F to assure lasting protection against rust and corrosion while providing clean hot water. · Warranty - Six or Ten year limited tank warranty. Six year warranty on parts. (See warranty for details) · Magnesium Tank Saver Anode - High capacity anode rod provides protection from the effects of electrolytic corrosion. Max. Vent Length total equiv. feet · Adjustable Thermostat - This accurate control provides an easy way to reset water temperature for best economy. Automatic over-heat safety device is standard. LVN076 · Vertical Venting - can be vented vertically with 3” or 4” PVC or CPVC vent pipe, depending on the model. (See vent chart for max. vent lengths) · Electronic Spark Ignition - Eliminates nuisance pilot outages and saves fuel by eliminating the continuously burning pilot, while providing solid-state ignition. · Low NOx Burner - This whisper quiet, 360° burner incorporates aluminized steel into its die-formed design. The large burner diameter transfers more heat, while providing clean and efficient combustion. Satisfies local codes and emissions standards. · Dielectric Nipples - Factory installed waterways protect the tank from the corrosive action between dissimilar metals, while providing piping convenience. Horizontal 3” 4” 60’ 180’ Vertical 3” 4” 60’ 180’ 40 Power Direct Vent Gas Models Natural Gas Model Gal. Btu/hr GPH @ Number Cap. Input 90ºF Rise PRN050G 48 60,000 65 PRN065G 65 65,000 70 PRN075G 75 70,000 75 LP Gas Btu/hr GPH @ Input 90ºF Rise 60,000 65 60,000 65 70,000 75 1st Energy Vent Hour Factor A B C D E F G H Size 100 0.60 58-34” 22” 30-1/2” 68-1/2” 67” 52-1/4” 14” 15-3/4” 3” 114 0.59 62” 24” 33-1/4” 71-1/2” 69” 55-3/4” 13-3/4” 15-3/4” 3” 132 0.58 59” 26” 35-1/2” 69-1/2” 68-1/2” 51-3/4” 13-3/4” 16-3/4” Ship. Wt. 196 230 3” 262 Notes: “P” prefix indicates 6 year tank warranty. Replace “P” with “S” for 10 year tank warranty. All LP heaters are equipped with a cast iron burner. Replace “N” with “L” to indicate LP gas model. * indicates models with 2” of polyurethane foam insulation. All gas connections are 1/2”. All water connections are 3/4” NPT on 11” centers. 110 VAC, 60 HZ, 2.1 AMP is required for power venting. Maximum Horizontal & Vertical Vent Length is 25 feet (40 equivalent feet, with 3 - 90º elbows), when using 3” pipe. Maximum Horizontal & Vertical Vent Length is 60 feet (75 equivalent feet, with 3 - 90º elbows), when using 4” pipe. Standard Features • Power Direct Venting System - This 2-pipe closed combustion system utilizes a stand alone vent to exhaust the byproducts of combustion, and a separate air intake to provide fresh combustion air to the unit. Vents up to 25 feet to an outside wall, using 3” PVC or CPVC pipe. Vents up to 60 feet to an outside wall, using 4” PVC or CPVC pipe. • Electronic Spark Ignition - Eliminates nuisance pilot outages and saves fuel by eliminating the continuously burning pilot while providing reliable solid state ignition. • Low NOx Burner - This whisper quiet, 360° burner incorporates aluminized steel into its die-formed design. The large burner diameter transfers more heat, while providing clean and efficient combustion. Satisfies local codes and emission standards. • Non-CFC Foam Insulation - Improved formulation provides uniform tank coverage with a thick blanket of insulating foam. This non-CFC polyurethane closed cell foam minimizes standby losses and maximizes heat retention. • Glass-Lined Steel Tank - The durable glass lining assures lasting protection against rust and corrosion while providing clean, clear hot water. This tank is automatically formed, rolled, and welded to assure a continuous seam for the glass lining. Each tank is triple-tested to ensure quality. • Heat Traps - Factory installed, minimizes heat loss through piping. • Adjustable Thermostat - This accurate control provides an easy way to reset water temperature for best economy. Automatic over-heat safety device is standard. • Dielectric Nipples - Factory installed waterways protect the tank from corrosive action between dissimilar metals, while providing piping convenience. • Side Tappings- Provided for space heating applications. • Six Foot Power Cord - Included for installation ease. • Temperature & Pressure Relief Valve - Included. • Brass Drain Valve • Warranty - Six or ten year limited tank warranty. Six year warranty on parts. (See warranty for details) 41 Balanced Flue Gas Models Model Number LBN040G LBN050G Gal. Cap. 40 50 Natural Gas LP Gas Btu/hr GPH @ Input GPH @ Input 90°F Rise Btu/hr 90°F Rise A B 38,000 41 36,000 39 49-1/4” 20” 42,000 45 40,000 43 58-3/4” 20” Notes: Replace “N” with “L” for LP gas models. All LP models are equipped with a cast iron burner *External air intake is 5” diameter. Performance data is based on manufacturer test results. C 31-1/4” 31” D 63-1/4” 72-1/4” E 43-1/2” 52-1/4” F 15” 15” Vent Size* 3”/5” 3”/5” Ship. Wt. 169 186 “L” prefix indicates 6 year tank warranty *Internal exhaust vent is 3” diameter All gas connections are 1/2”. All water connections are 3/4” NPT. Standard Features · Sealed Combustion / Direct Vent System - The co-axial vent rotates 360° providing installation flexibility. The concentric vent system draws all combustion air from outside the building through the outer pipe and exhausts the by-products of combustion through the inner pipe, of the two-pipe system, directly outdoors. · Piezo Ignitor - provides easy pilot ignition with the push of a button. · Low NOx Burner - This whisper quiet, 360° burner incorporates aluminized steel into its die-formed design. The large burner diameter transfers more heat, while providing clean and efficient combustion. Satisfies local codes and emissions standards. · Non-CFC Foam Insulation - Improved formulation provides uniform tank coverage with a thick blanket of insulating foam. This non-CFC polyurethane closed cell foam minimizes standby losses and maximizes heat retention. · Glass-Lined Steel Tank - The tank is automatically formed, rolled, and welded to ensure a continuous seam for the glass lining. The durable glass lining is fused to the interior of the tank at 1600°F to assure lasting protection against rust and corrosion while providing clean, clear hot water. · Magnesium Tank Saver Anode - High capacity anode rod provides protection from the effects of electrolytic corrosion. · Heat Traps - Factory installed, minimizes heat loss through piping. · Adjustable Thermostat - This accurate control provides an easy way to reset water temperature for best economy. Automatic over-heat safety device is standard. · Dielectric Nipples - Factory installed waterways protect the tank from the corrosive action between dissimilar metals, while providing piping convenience. · Temperature & Pressure Relief Valve - Included. · Brass Drain Valve · Warranty - *Six year limited tank warranty. Six year warranty on parts. (See warranty for details) *Ten year limited warranty upgrade available Optional Equipment Vent Kits 4-8 FT Extension 4-3/4” - 5-11/16” Extension 6-1/2” - 9-3/16” Extension 14” - 24” Extension Part Number DRH1145 DRH1148 DRH1149 DRH1150 42 Double Duty Gas Models COLD WATER INLET HOT WATER OUTLET COLD WATER INLET HOT WATER OUTLET Top Top B D E A F XPN075 G Atmospheric Power Vented Model Gal. Btu/hr Number Cap. Input Atmospheric Models XDN051G* 45 65,000 XDL051G (LP)* 45 61,000 XDN075 72 76,000 XDL075 (LP) 72 76,000 Power Vented Models XPN051G* 45 67,000 XPL051G (LP)* 45 60,000 XPN075 72 76,000 XPL075 (LP) 72 75,500 Notes: XDN051G GPH @ 90°F Rise AFUE Space Heating (Btu/Hr) A B 70 66 81 81 80.0 80.0 82.0 82.0 55,000 54,000 55,000 54,000 56-1/2” 56-1/2” 60-1/2” 60-1/2” 22” 22” 26” 26” 72 65 82 81 82.0 82.0 82.0 82.0 55,000 54,000 55,000 54,000 56-1/2” 56-1/2” 59” 60-1/4” 22” 22” 26” 26” All water connections are 3/4” NPT All gas connections are 1/2” NPT. Performance data is based on manufacturer’s test results. * Indicates models equipped with Shield Combustion System. D Vent Shipping Size Weight E F G 59-1/4” 59-1/4” 63-3/4” 63-3/4” 50” 50” 53” 53” 28” 28” 31” 31” 13” 13” 16” 16” 4” 4” 4” 4” 238 238 328 328 66” 66” 68-1/2” 69-3/4” 50” 50” 51-3/4” 53” 28” 28” 29-1/2” 31” 11-3/4” 11-3/4” 13-3/4” 15” 3” 3” 3” 3” 245 245 301 335 110 VAC 60 HRZ 2.1 AMPS required for Power Vented models. Models fired above 75,000 Btu/Hr are certified to ANSI Z21.10.3 and are not required to meet the NAECA or FVIR standard. Standard Features Additional Features for Power Vented Models: • Domestic Hot Water & Space Heating • Non CFC Foam Insulation • High First Hour Delivery • Double Wall, Glass Coated Heat Exchanger • Heavy-Gauge, Glass-Lined Steel Tank • Magnesium Tank Saver Anode • Factory Installed Dielectric Nipples • Brass Drain Valve • T&P Relief Valve Factory Supplied • 10 Year Limited Tank Warranty • 6 Year Limited Warranty on Parts (See Warranty for Details) • Vertical or Sidewall Venting • Vents up to 60 equivalent feet. with 3” PVC • Vents up to 180 equivalent feet. with 4” PVC NOTE: 90° elbows = 5 eq. ft. 43 Manufactured Home Gas Models Roof Jack Kits Kit Number Dimensions DRH1070 DRH1071 DRH1072 DRH1173 Model Number MDN030G MDN040G Gal. Cap. 30 40 Btu/hr Input 30,000 30,000 GPH @ 90°F Rise 31 31 A 57-1/2” 58” Notes: “M” prefix indicates 6 year tank warranty Field Convertible from Natural Gas to LP gas. All gas connections are 1/2”. Performance data is based on manufacturer test results. B 16” 18” D 50” 50” E 22-1/2” 22-1/2” F 13-3/4” 13-3/4” Vent Size 3” 3” Shipping Weight 111 131 Replace “M” with “S” for 10 year tank warranty. Three year limited warranty on all models when installed in a commercial application. All water connections are 3/4” NPT. Standard Features: · Low NOx Burner · Non-CFC Foam Insulation · Natural Gas to LP Gas Conversion Kit · Adjustable Thermostat · Glass-Lined Steel Tank 12” 18”– 32” 32”– 60” 48”– 95” · Magnesium Tank Saver Anode · Factory Installed Dielectric Nipples · Temperature & Pressure Relief Valve · Brass Drain Valve · Warranty 44 Solar Models TOP VIEW #1 – 3/4” Pump Suction #2 – 3/4” Cold Inlet #3 – 3/4” Collector Return #4 – 3/4” Hot Outlet Model Number FTA066K FTA082K* FTA120K* Gal. Cap. 65 80 119 A 59” 59” 62-3/4” B 22” 24” 28” D 52-1/2” 52-1/2” 56” Notes: *Models feature alternate collector supply and return connections. Standard Features • • • • • • • • • • Foam Insulation Glass-Lined Steel Tank Magnesium Tank Saver Anode Dielectric Nipples Side Relief Valve Tapping Pre-Wired Tank Sensor Lead Heating Element Certified at 300 psi Test Pressure Brass Drain Valve Warranty Alt. Coll. Return E – 38” 38-1/4” Alt. Coll. Supply F – 8” 8” Ship Weight 165 210 310 45 Multi-Stack Frame Pre-Assembled Heavy Duty Factory Welded Construction Two Lochinvar 990,000 Btu/hr Copper-Fin II® water heaters stacked for a total capacity of almost 2 million Btu/hr. Another Innovation from Lochinvar Lochinvar’s Copper-Fin technology not only makes our water heaters and boilers more efficient, it means they also have a smaller footprint. So they save space as well as operating costs. And now there is a way to get greater flexibility and reliability, save even more space, and get a system that is perfectly matched to a facility — thanks to the Multi-Stack System from Lochinvar. Match Load and Capacity With this versatile stand, you can stack almost any combination of our Copper-Fin, Copper-Fin II, and Efficiency+ water heaters and boilers. So you can achieve the perfect Btu/hr capacity for each application. For example, a facility needs a Copper-Fin II water heater with a total capacity of 1.6 million Btu/hr. Instead of installing an oversized 1801 unit or a smaller 1441 model, now you can combine two units — 991 and 651 models — to exactly match the facility’s needs. Plus, the total footprint of this combined system is just over 10 inches wider than the 651 unit alone, making it smaller than either the 1801 or 1441 model. All thanks to the Lochinvar Multi-Stack Frame. Added System Benefits This modular design provides two other important benefits. First, it allows for system turndown for greater efficiency when demand is lower. And second, it ensures against system failure by utilizing two independent but complementary units. For indoor residential and light commercial needs or commercial applications up to 4 million Btu/hr, the Multi-Stack Frame gives greater flexibility without a significant increase in stack size or overall system dimensions. Once you have determined a facility’s requirements and the exact models needed, utilize the charts provided to calculate total system dimensions. Note: Indoor Installation Only 46 Multi-Stack Frame ARMOR® Water Heaters (Models 150-800)/ KNIGHT® Heating Boilers (Models 080-800) Efficiency +® Water Heaters (Models 150-300) Copper-Fin® Water Heaters (Models 090-500) A AA C B BB A B C CC MODEL # PART # A* B** C Wt. (.lbs) AW 150-199 AW 285-500 AW 600-800 KB 080-210 KB 285-500 KB 600-800 MSF3043 MSF3044 MSF30002 MSF3043 MSF3044 MSF30002 90-1/2” 109” 109” 90-1/2” 109” 109” 26” 26” 26” 26” 26” 26” 26” 34” 43” 26” 34” 43” 60 72 94 60 72 94 Note: Heater height is 33-1/4” KB 80-120 and AW 150-199 models. Heater height is 42-1/2” KB 285-800 and AW 285-800 models. MODEL # PART # A* B** C A* B** C CW 090 MSF 3034 65-1/2” 36” 39” EW 150 MSF3021 71-1/4” 37” 24” CW 135 MSF 3034 65-1/2” 36” 39” EW 200 MSF3021 71-1/4” 37” 24” CW 180 MSF 3034 65-1/2” 36” 39” EW 250 MSF3021 71-1/4” 37” 24” CW 199 MSF 3035 65-1/2” 48” 39” EW 300 MSF3021 71-1/4” 37” 24” CW 225 MSF 3035 65-1/2” 48” 39” CW 270 MSF 3035 65-1/2” 48” 39” CW 315 MSF 3035 65-1/2” 48” 39” CW 360 MSF 3035 65-1/2” 48” 39” CW 399 MSF 3036 65-1/2” 65” 39” CW 500 MSF 3036 70-1/2” 65” 39” MODEL # PART # Note: Heater height is 28” on all models. Copper-Fin® Water Heaters (Models 495-745) (Models 986-2066) A A C B B MODEL # PART # A* B** CW 495 MSF3002 81-1/2” 51” 24-1/2” CW 645 MSF3003 84-1/2” 70” 26” CW 745 MSF3003 84-1/2” 70” 26” CW 986 MSF3007 80” 68 “ 36” CW1256 MSF3008 80” 88” 36” CW1436 MSF3008 80” 88” 36” CW1796 MSF3009 80” 114” 36” CW 2066 MSF3009 80” 114” 36” Note: Heater Height is 33-1/4” (495-745) & 36” (986-2066) C Copper-Fin II® Water Heaters A MODEL # PART # CF 0401 MSF3022 67-1/2” A* B** 59” 24-1/2” CF 0501 MSF3022 67-1/2” 59” 24-1/2” CF 0651 MSF3023 67-1/2” 80” 24-1/2” CF 0751 MSF3023 67-1/2” 80” 24-1/2” CF 0991 MSF3007 80” 68” 36” CF 1261 MSF3008 80” 88” 36” CF 1441 MSF3008 80” 88” 36” CF 1801 MSF3009 80” 114” 36” CF 2071 MSF3009 80” 114” 36” Note: Heater height is 31-1/2” (401-751) & 36” (991-2071) B C C * To vent connection ** Allow space for plumbing connections C NOTES We hope this catalog displaying our water heater products has helped you find what you’re looking for. And we’d like to remind you that Lochinvar is much more than a Water Heater manufacturer. Lochinvar Corporation also manufactures a complete line of high efficiency Boilers, Pool Heaters and ASME Storage Vessels. Simply stated, we have a product for every application. Whether it’s residential, commercial or industrial using gas, electric, steam or solar, we have a product to meet your needs. And when it’s time to select the right product for your application, we have a staff of highly trained professionals ready to assist you. So look to Lochinvar’s quality products and expert support for all your water heating needs! Thank you for considering Lochinvar and taking a moment to review our line of high efficiency water heaters. www.Lochinvar.com Lochinvar Corporation • 300 Maddox Simpson Pkwy • Lebanon, TN 37090 • 615-889-8900 / Fax: 615-547-1000 www.Lochinvar.com PDP-10M - 10/09–Printed in U.S.A.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Create Date : 2010:12:21 08:33:24-06:00 Modify Date : 2010:12:21 08:33:24-06:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : Acrobat Distiller 9.0.0 (Windows) Format : application/pdf Title : untitled Document ID : uuid:f003ed91-73e4-4879-b1db-13fa3db3a138 Instance ID : uuid:002fe9c0-b304-40dd-9c58-9257dfdc136e Page Count : 52EXIF Metadata provided by EXIF.tools