WinSpec/32 Software User's Manual Win Spec 2.6 Spectroscopy User
User Manual:
Open the PDF directly: View PDF
Page Count: 290 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Table of Contents
- Part 1 Getting Started
- Introduction
- Chapter 1 Installing and Starting WinSpec/32
- System Requirements
- Your System Components
- Installing the PCI Card Driver
- Installing the USB 2.0 Card Driver
- Installing the FireWire Card Driver
- Installing the GigE Ethernet Card Driver
- Installing WinSpec/32
- Changing Installed Components, Repairing, or Uninstalling/Reinstalling WinSpec/32
- Starting WinSpec/32
- Chapter 2 Basic Hardware Setup
- Introduction
- Basic Hardware Overview
- Entering the Default System Parameters into WinSpec
- Editing Controller and Detector Characteristics
- Entering the Data Orientation
- Entering the Interface Communication Parameters
- Entering the Cleans/Skips Characteristics
- Setting up a Spectrograph
- Specifying the Active Spectrograph
- Entering Grating Information
- Selecting and Moving the Grating
- Entering Information for Software-Controlled Slits and/or Mirrors
- Chapter 3 Initial Spectroscopic Data Collection
- Chapter 4 Initial Imaging Data Collection
- Introduction
- Temperature Control
- Cleans and Skips
- Experiment Setup Procedure (All Controllers and Unintensified Cameras)
- Experiment Setup Procedures (Intensified Cameras)
- Data Collection Procedures (Intensified Cameras)
- Data Collection Procedures (Controller-Specific)
- Data Collection (Unintensified Cameras)
- Chapter 5 Opening, Closing, and Saving Data Files
- Chapter 6 Wavelength Calibration
- Chapter 7 Spectrograph Calibration
- Chapter 8 Displaying the Data
- Introduction
- Screen Refresh Rate
- Data Displayed as a 3D Graph
- Data Window Context menu
- Labeling Graphs and Images
- Data Displayed as an Image
- Displaying circuit.spe
- Changing the Brightness Range
- Brightness/Contrast Control
- Selecting a Region of Interest
- Opening the Display Layout dialog
- Viewing Axes and Cross Sections
- Information box
- Autoranging the Intensity in a ROI
- Changing the Color of the Axes and Labels
- Specifying a New ROI and Intensity Range
- Displaying a Z-Slice
- Part 2 Advanced Topics
- Chapter 9 On-Line Data Acquisition Processes
- Chapter 10 Cleaning
- Chapter 11 ROI Definition & Binning
- Chapter 12 Correction Techniques
- Chapter 13 Spectra Math
- Chapter 14 Gluing Spectra
- Chapter 15 Post-Acquisition Mask Processes
- Chapter 16 Additional Post-Acquisition Processes
- Chapter 17 Printing
- Chapter 18 Pulser Operation
- Chapter 19 Custom Toolbar Settings
- Chapter 20 Software Options
- Part 3 Reference
- Appendix A System and Camera Nomenclature
- Appendix B WinSpec/32 First Light Instructions
- Appendix C Calibration Lines
- Appendix D Data Structure
- Appendix E Auto-Spectro Wavelength Calibration
- Appendix F CD ROM Failure Work-Arounds
- Appendix G WinSpec/32 Repair and Maintenance
- Appendix H USB 2.0 Limitations
- Appendix I Troubleshooting
- Introduction
- Camera1 (or similar name) on Hardware Setup dialog
- Controller Is Not Responding
- Data Loss or Serial Violation
- Data Overrun Due to Hardware Conflict message
- Data Overrun Has Occurred message
- Error Creating Controller message
- Ethernet Network is not accessible
- OrangeUSB USB 2.0 Driver Update
- Program Error message
- Serial violations have occurred. Check interface cable.
- Appendix J Glossary
- Warranty & Service
- Limited Warranty:
- Basic Limited One (1) Year Warranty
- Limited One (1) Year Warranty on Refurbished or Discontinued Products
- XP Vacuum Chamber Limited Lifetime Warranty
- Sealed Chamber Integrity Limited 12 Month Warranty
- Vacuum Integrity Limited 12 Month Warranty
- Image Intensifier Detector Limited One Year Warranty
- X-Ray Detector Limited One Year Warranty
- Software Limited Warranty
- Owner's Manual and Troubleshooting
- Your Responsibility
- Contact Information
- Limited Warranty:
- Index