XC4442 Ultrasonic Sensor XC4490 Manual Main

User Manual:

Open the PDF directly: View PDF .
Page Count: 1

Download
Open PDF In Browser	View PDF

XC4490 Laser Diode Module
The laser diode module brings a controllable laser to your Duinotech Main Board.
The laser can be driven directly from a Duinotech IO pin. As with all lasers, be
careful that the laser is not aimed in anyone’s eyes.
Pin
S

Main
Board
D13

-

GND

Function
5V supply
Not connected
Ground connection

Comment
Put 5V on this pin to turn the module on
No need to connect anything to this pin.
Ground connection

In the above example, S is connected to pin 13 on the Duinotech Main Board and – is
connected to GND, and the ‘Blink’ sketch is uploaded from the Arduino IDE (from
Examples/Basics under the file menu). This blinks the laser on and off.
Sample Code:
/*
Blink
Turns on an LED on for one second, then off for one second, repeatedly.
Most Arduinos have an on-board LED you can control. On the Uno and
Leonardo, it is attached to digital pin 13. If you're unsure what
pin the on-board LED is connected to on your Arduino model, check
the documentation at http://arduino.cc
This example code is in the public domain.
modified 8 May 2014
by Scott Fitzgerald
*/
// the setup function runs once when you press reset or power the board
void setup() {
// initialize digital pin 13 as an output.
pinMode(13, OUTPUT);
}
// the loop function runs over and over again forever
void loop() {
digitalWrite(13, HIGH);
// turn the LED on (HIGH is the voltage level)
delay(1000);
// wait for a second
digitalWrite(13, LOW);
// turn the LED off by making the voltage LOW
delay(1000);
// wait for a second
}



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Language                        : en-AU
Tagged PDF                      : Yes
Title                           : XC4442 Ultrasonic sensor
Author                          : Tim
Creator                         : Microsoft® Word 2016
Create Date                     : 2017:02:14 15:10:23+11:00
Modify Date                     : 2017:02:14 15:10:23+11:00
Producer                        : Microsoft® Word 2016

EXIF Metadata provided by EXIF.tools