RRV2636 XVEV51
User Manual: XVEV51
Open the PDF directly: View PDF .
Page Count: 126
Download | |
Open PDF In Browser | View PDF |
STEREO DVD TUNER DECK EV51DVD SOUND MODE TIMER/CLOCK ADJ KARAOKE DISPLAY ST. MEMORY ENTER DVD/CD 4/1 TUNING – – TAPE + VOLUME PLAY/PAUSE STOP ¡/¢ TUNING + TUNER LINE OPEN/CLOSE REVERSE MODE DOLBY NR(DEMO) REC/STOP ASES MIC VOL MIN ORDER NO. MAX MIC (MAIN) MIC (SUB) RRV2636 XV-EV51 STEREO DVD TUNER DECK XV-EV51 XV-EV21 THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S). Model Type Power Requirement Regienal restriction codes (Region No.) XV-EV51 ZLXJ/NC DC Power supplied from other system component 4 XV-EV21 ZLXJ/NC DC Power supplied from other system component 4 Remarks This product does not function properly independently; to avoid malfunctions, be sure to connect it to the prescribed system component(s), otherwise damage may result. Component System System Service manual MINI SYSTEM EVA-5CH EVA-2CH Stereo DVD Tuner Deck XV-EV51 XV-EV21 RRV2636(This manual) Stereo Power Amplifier M-EV51 M-EV21 RRV2663(EV51), RRV2664(EV21) Speaker System S-EV51V S-EV21V RRV2640(EV51), RRV2641(EV21) For details, refer to "Important symbols for good services" . PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2002 T-ZZR AUG. 2002 printed in Japan 1 2 3 4 SAFETY INFORMATION A This service manual is intended for qualified service technicians ; it is not meant for the casual doit-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual.Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician. WARNING ! B THE AEL (ACCESSIBLE EMISSION LEVEL) OF THE LASER POWER OUTPUT IS LESS THAN CLASS 1 BUT THE LASER COMPONENT IS CAPABLE OF EMITTING RADIATION EXCEEDING THE LIMIT FOR CLASS 1. A SPECIALLY INSTRUCTED PERSON SHOULD DO SERVICING OPERATION OF THE APPARATUS. LASER DIODE CHARACTERISTICS FOR DVD : MAXIMUM OUTPUT POWER : 5 mW WAVELENGTH : 650 nm FOR CD : MAXIMUM OUTPUT POWER : 5 mW WAVELENGTH : 780 nm C LABEL CHECK D Additional Laser Caution (Printed on the Rear Panel A) E XV-EV51/ZLXJ/NC 1. Laser Interlock Mechanism • Loading switch (S101 on the LOAB Assy) is used for interlock mechanism of the laser. When this switch turned ON in SW2 (XCLOSE) side (OPEN signal is 0V and XCLOSE signal is 3.5V), a laser becomes the status which can completely oscillation. Furthermore, the laser completely oscillates in the disc judgment and disc playback. When player is power ON state and laser diode is not completely oscillating, 780nm laser diode is always oscillating by half power. • Laser diode is driving with Q101 (650nm LD) and Q102 (780nm LD) on the DVDM Assy. Therefore, when short-circuit between the emitter and collector of these transistors or the base voltage is supplied for transistors turn on, the laser oscillates. (failure mode) • In the test mode ∗ , there is the mode that the laser oscillates except for the disc judgment and playback. LD ON mode in the test mode oscillates with the laser forcibly. The interlock mechanism mentioned above becomes invalid in this mode. 2. When the cover is open, close viewing through the objective lens with the naked eye will cause exposure to the laser beam. F ∗ : See page 80. XV-EV51 2 1 2 3 4 5 6 7 8 [ Important symbols for good services ] In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely. When you find the procedures bearing any of the symbols, be sure to fulfill them: A 1. Product safety You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual. 2. Adjustments To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable. In accordance with the procedures or instructions described in this manual, adjustments should be performed. 3. Cleaning B For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning, proper cleaning should be performed to restore their performances. 4. Shipping mode and shipping screws To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or the shipping screws should be installed before shipping out in accordance with this manual, if necessary. 5. Lubricants, glues, and replacement parts Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed ones should be used. C Discs compatible with this player Any disc that displays one of the following logos should play in this player. Other formats, including DVD-Audio, DVD-RAM, DVD-ROM, CD-ROM (except those that contain MP3 files), SACD and Photo CD will not play. D DVD-Video Audio-CD Video-CD CD-R * CD-RW * E * : Video Mode Only F XV-EV51 5 6 7 3 8 1 2 3 4 CONTENTS SAFETY INFORMATION ..................................................................................................................................... 2 1. SPECIFICATIONS ............................................................................................................................................ 5 2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 6 2.1 PACKING ................................................................................................................................................... 6 2.2 EXTERIOR SECTION................................................................................................................................ 8 2.3 FRONT PANEL SECTION ....................................................................................................................... 10 2.4 LOADING MECHANISM ASSY ............................................................................................................... 12 2.5 TRAVERSE MECHANISM ASSY............................................................................................................. 14 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 16 3.1 BLOCK DIAGRAM ................................................................................................................................... 16 3.2 OVERALL WIRING DIAGAM ................................................................................................................... 20 3.3 FM/AM TUNER MODULE ........................................................................................................................ 24 3.4 IF ASSY ................................................................................................................................................... 26 3.5 AF ASSY(1/2) .......................................................................................................................................... 28 3.6 AF ASSY(2/2) .......................................................................................................................................... 30 3.7 DECK ASSY ............................................................................................................................................ 32 3.8 DVDM ASSY(1/2)..................................................................................................................................... 34 3.9 DVDM ASSY(2/2)..................................................................................................................................... 36 3.10 DVD IF ASSY ......................................................................................................................................... 38 3.11 DISP1, DISP2, DISP3 and LED ASSYS ................................................................................................ 40 3.12 DSP ASSY ............................................................................................................................................. 42 3.13 MIC ASSY .............................................................................................................................................. 44 4. PCB CONNECTION DIAGRAM ..................................................................................................................... 46 4.1 LOAB ASSY ............................................................................................................................................. 46 4.2 FM/AM TUNER MODULE ........................................................................................................................ 47 4.3 DVDM ASSY ............................................................................................................................................ 48 4.4 DVD IF ASSY ........................................................................................................................................... 52 4.5 IF ASSY ................................................................................................................................................... 54 4.6 AF ASSY .................................................................................................................................................. 56 4.7 DECK ASSY ............................................................................................................................................ 58 4.8 DISP1, DISP2, DISP3 and LED ASSYS .................................................................................................. 60 4.9 MIC ASSY ................................................................................................................................................ 62 4.10 DSP ASSY(XV-EV51 Only).................................................................................................................... 63 5. PCB PARTS LIST ........................................................................................................................................... 64 6. ADJUSTMENT ............................................................................................................................................... 72 6.1 DECK SECTION ...................................................................................................................................... 72 6.1.1 Adjustment condition ......................................................................................................................... 72 6.1.2 Playback and Recording section ....................................................................................................... 73 6.2 TUNER SECTION .................................................................................................................................... 75 6.3 DVD SECTION ADJUSTMENT ITEMS ana LOCATION.......................................................................... 76 6.4 JIGS and MEASURING INSTRUMENTS ................................................................................................ 76 6.5 NECESSARY ADJUSTMENT POINTS ................................................................................................... 77 6.6 TEST MODE ............................................................................................................................................ 78 6.7 MECHANISM ADJUSTMENT .................................................................................................................. 79 7. GENERAL INFORMATION ............................................................................................................................. 82 7.1 DIAGNOSIS ............................................................................................................................................. 82 7.2 PARTS.................................................................................................................................................... 101 7.3 CLEANING............................................................................................................................................. 120 8. PANEL FACILITIES ...................................................................................................................................... 121 A B C D E F XV-EV51 4 1 2 3 4 5 6 7 8 1. SPECIFICATIONS A Specifications Amplifier Section Miscellaneous X-EV51DVD model Continuous Power Output: Front ................................... 80 W per channel (1kHz, 10 %, 8 Ω) Center...................... 33 W (1kHz, 10 %, 8 Ω) Surround............................. 33 W per channel (1kHz, 10 %, 8 Ω) X-EV21DVD model Continuous Power (RMS) ............. 80 W + 80 W (1 kHz, THD 10%, 8 Ω) Disc section Power Requirements Multi voltage model ....... AC 110-127/ 220-230/ 240V(switchable), 50/60 Hz Power Consumption X-EV51DVD model Singapore, Malaysia, Hong Kong models.......175 W All other model .................................... 465 W X-EV21DVD model B Singapore, Malaysia models .................. 150 W All other model .................................... 540 W Power Consumption in standby mode .............1 W Digital audio characteristics ................ DVD fs: 96 kHz, 24-bit Type ........... DVD system, Video CD system and Compact Disc digital audio system Frequency response ................... 4 Hz to 44 kHz S/N ratio .................................................... 95 dB Dynamic range ......................................... 95 dB Total harmonic distortion ..................... 0.005 % Wow and Flutter..................Limit of measurement (± 0.001 % W.PEAK) or less (EIAJ) Cassette deck section Systems.........................4 track, 2-channel stereo Heads.......................Recording/playback head x 1 Erasing head x 1 Motor ................................... DC servo motor x 1 Tape types ...............................TYPE I (Normal) Dimensions: DVD Tuner Deck .................. 170 (W) x292.5(H) x 260 (D) mm Power Amplifier ....................... 170 (W) x 190 (H) x 254 (D) mm Weight: DVD Tuner Deck XV-EV51 ................................................ XV-EV21 ................................................ Power Amplifier M-EV51 .................................................. M-EV21 .................................................. 3.6 kg 3.5 kg Accessories (Stereo DVD Tuner Deck) Operating instructions..........................................2 FM tuner section Accessories (Stereo Power Amplifier) Frequency Range........................87.5 - 108MHz Antenna ..................................75 Ω, unbalanced Remote control ....................................................1 AM tuner section Australian, New Zealand, Central and South American models........................... 2 All other models ............................................. 1 Power plug adapter (excluding Singapore, Hong Kong and Malaysian models)..................... 1 Video cord............................................................ 1 System cable (EV51DVD) ................................... 2 System cable (EV21DVD) ................................... 1 FM antenna.......................................................... 1 AM loop antenna.................................................. 1 Dry cell batteries (AA/R6) ................................... 2 FrequencyRange With 9 kHz step .......... 531 kHz to 1,602 kHz With 10 kHz step ........ 530 kHz to 1,700 kHz Antenna ........................................ Loop antenna Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Manufactured under license from Digital Theater Systems, Inc. C 5.3 kg 4.8 kg Power cord D • Specifications and design subject to possible modification without notice, due to improvements. E 0 9 TV CONTROL Remote control unit (XXD3049) System Cable ×1 (XDE3053) FM wire antenna (ADH7004) AA size IEC R6P Dry cell batteries (x2) F XV-EV51 5 INPUT CHANNEL VOLUME SELECT 8 7 SHIFT CLEAR ENTER 6 3 2 5 4 1 TEST TONE CH LEVEL SLEEP ¡ ¢ 7 8 4 1 FOLDER – /e SOUND MODE PROGRAM REPEAT RANDOM E/ FOLDER + 3 RETURN 33 ENTER TUNE – DVD MENU TOP MENU ST + TUNE + ST – SYSTEM SETUP DVD SETUP CLOCK ADJ. VOLUME DSP MUTE I — KEYCON — i KARAOKE ECHO DVD DISP MONO SYSTEM DISP TIMER SURROUND ADVANCED LINE DVD/CD TAPE FM/AM AM loop antenna (ATB7009) STANDBY/ON Video Cord (VDE1034) AC Power Cord (XDG3001) AUDIO SUBTITLE ANGLE ZOOM Accessories 6 7 5 8 1 2 3 4 2. EXPLODED VIEWS AND PARTS LIST NOTES: A Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List. The mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. Screws adjacent to mark on product are used for disassembly. For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions, apply as you think it appropriate.) 2.1 PACKING 1 8 B 2 3 C 6 5 D 4 E 7 F XV-EV51 6 1 2 3 4 5 6 7 8 PACKING parts List Mark No. 1 Description Operating Instructions (English) Operating Instructions (Chinese) Polyethylene Bag (0.03 x 230 x 340) 2 NSP 3 4 Packing Sheet Mark No. Part No. 5 6 7 8 XRB3017 XRC3073 Description Front Pad M Rear Pad M Packing Case Correct Sheet Part No. XHA3130 XHA3131 See Contrast table (2) XRH3007 A Z21-038 AHG7053 (2) CONTRAST TABLE XV-EV51/ZLXJ/NC and XV-EV21/ZLXJ/NC are constructed the same except for the following : Mark No. 7 Symbol and Description XV-EV51/ZLXJ/NC XV-EV21/ZLXJ/NC Packing Case XHD3305 B XHD3308 C D E F XV-EV51 5 6 7 7 8 1 2 3 4 2.2 EXTERIOR SECTION A 37 3 27 35 C 39 7 XV-EV51 Only K 28 40 E B F 4 C 40 B 25 29 Refer to "2.4 LOADING MECHA ASSY". 9 40 G D B E A 2 32 H 38 8 32 40 40 I 21 O 16 G 12 38 O 44 39 J 39 48 L M 39 11 40 C K XV-EV51 38 Only 39 39 H 38 52 N I 39 39 42 24 23 F 30 45 39 46 47 N 39 40 G 49 51 43 14 D D 22 E F 19 39 39 50 13 C 6 K J M 39 L 5 41 18 A 15 10 40 1 20 39 Refer to "2.3 FRONT PANEL SECTION". A B E 36 42 26 33 43 34 F 39 XV-EV51 8 1 2 3 4 CONTACT SIDE 31 NON-CONTACT SIDE 17 5 6 7 8 EXTERIOR SECTION parts List Mark No. 1 2 3 4 5 6 7 8 NSP 9 10 NSP 11 12 13 14 15 16 NSP 17 18 19 20 21 22 23 24 25 26 Description FM/AM TUNER Module IF Assy AF Assy DECK Assy DVDM Assy DVD IF Assy DSP Assy DECK Mechanism Unit LOADING MECHA Assy DC Fan Motor Earth Lead Wire 11P Flat Flexible Cable 13P Flat Flexible Cable 30P Flat Flexible Cable 16P Flat Flexible Cable Connector Assy 5P Chassis Rear Panel A Rear Panel B Mecha Frame DVD Shield GND Plate Ratch Spring Damper Assy Door Spring L Mark No. Part No. AXQ7228 See Contrast table (2) See Contrast table (2) See Contrast table (2) AWM7684 AWM7677 See Contrast table (2) XYM3015 VWT1203 AXM7025 XDE3055 XNA3011 See Contrast table (2) See Contrast table (2) XNG3082 XNG3083 XNG3084 ABH7130 AXA7052 XBH3010 Leg Cushion XEB3028 Part No. Deck Lens Deck Door Ratch Mold Side Bonnet L XAK3327 XAN3047 XMR3001 XNE3026 31 32 33 34 35 Side Bonnet R Binder Tray Cap DVD Badge Top Panel XNE3027 ZCA-SKB90BK XAK3325 XAK3331 XAK3326 Front Panel Assy Top Panel Assy Screw Screw Screw See Contrast table (2) XXG3131 VPZ30P080FZK BBZ30P080FZK BBZ30P080FMC 41 42 43 44 45 Screw Screw Screw Adapter 02 L Adapter 02 R BPZ30P350FZK VPZ30P080FNI BBZ30P080FNI ANW7247 ANW7248 46 47 48 49 50 Shield Case Heat plate Radiation Sheet Cushion FFC Barrier ANK7108 ANG7426 AEB7255 AEB7267 AEC7443 51 52 FFC Spacer Caution Label AEC7442 VRW1699 NSP 36 NSP 37 38 39 40 DE012VF0 XDD3114 XDD3115 XDD3116 XDD3117 Description 27 28 29 30 A C (2) CONTRAST TABLE XV-EV51/ZLXJ/NC and XV-EV21/ZLXJ/NC are constructed the same except for the following : Mark NSP NO B D XV-EV51/ZLXJ/ XV-EV21/ZLXJ/NC NC Symbol and Description 2 3 4 7 18 IF Assy AF Assy DECK Assy DSP Assy Rear Panel A XWZ3617 XWZ3618 XWX3067 AWX8059 XNC3160 XWZ3627 XWZ3628 XWX3066 Not used XNC3180 19 37 Rear Panel B Front Panel Assy XNC3161 XXG3129 XNC3176 XXG3130 E F XV-EV51 5 6 7 9 8 1 2 3 4 2.3 FRONT PANEL SECTION A 8 33 1 J 33 D5108 D5107 6 9 6 B 11 13 11 7 14 12 B 4 33 15 L 33 C 18 16 21 19 C B 22 35 2 A 26 33 I 17 30 D 27 34 24 A 33 H 28 3 23 33 29 25 33 33 37 E 31 33 10 5 39 F 32 CONTACT SIDE 36 NON-CONTACT SIDE M 38 20 XV-EV51 10 1 2 3 4 5 6 7 8 FRONT PANEL SECTION parts List Mark No. Description Mark No. Part No. Description Part No. 1 2 3 4 5 DISP 1 Assy DISP 2 Assy DISP 3 Assy LED Assy MIC Assy XWZ3619 XWZ3620 XWZ3621 XWZ3622 See Contrast table (2) 21 22 23 24 25 Display Button L Display Button R Play Button Dolby Button L Dolby Button R XAD3149 XAD3150 XAD3151 XAD3154 XAD3155 6 7 8 9 10 LED (D5107, D5108) LCD 11P Flat Flexible Cable LCD Holder MIC Knob NSPWF50BS-9706 XAV3016 XDD3113 XMR3052 XAA3024 26 27 28 29 30 FUNC. Button L FUNC. Cover L FUNC. Button R FUNC. Cover R Front Panel M XAD3152 XAK3328 XAD3153 XAK3329 See Contrast table (2) 11 12 13 14 15 Diffusion Sheet Display Window LCD LT Cond LCD Cover Sensor Cover XAK3321 See Contrast table (2) XAK3323 XAK3324 XAK3330 31 32 33 34 35 Damper Assy Leg Cushion Screw FUNC. Assy R FUNC. Assy L XXA3029 XEB3028 VPZ30P080FZK XAD3158 XAD3157 16 17 18 19 20 Tray Lens FUNC. LT Cond LT Cond LT Cover Jack Door XAK3332 XAK3333 XAK3334 XAK3335 XAN3048 36 37 38 39 Cushion Gap Cover Magnet Screw 2x4 B XEB3004 XMR3055 XMF3003 XBA3011 A B C (2) CONTRAST TABLE XV-EV51/ZLXJ/NC and XV-EV21/ZLXJ/NC are constructed the same except for the following : Mark No. Symbol and Description XV-EV51/ZLXJ/NC XV-EV21/ZLXJ/NC 5 MIC Assy XWZ3626 12 Display Window XAK3322 XWZ3623 XAK3343 30 Front Panel M XMB3084 XMB3089 D E F XV-EV51 5 6 7 11 8 1 2 3 4 2.4 LOADING MECHANISM ASSY A 8 Note : To DVDM CN8 6 Refer to " Application of Lubricant". 8 8 Daifree GEM1036 To DVDM CN4 To DVDM CN2 2 Refer to "2.5 TRAVERSE MECHANISM ASSY-S". 8 B 12 Lubricating Oil GYA1001 18 3 20 13 A 23 22 17 4 16 5 19 22 C 21 15 22 7 A 10 14 11 Lubricating Oil GYA1001 D D 9 22 1 22 LOADING MECHANISM ASSY parts List Mark No. F Mark No. Part No. Description Part No. LOAB Assy Traverse Mechanism Assy-S Loading Motor Assy Motor Pulley Carriage DC Motor / 0.3W VWG2346 VXX2858 VXX2505 PNW1634 PXM1027 16 17 18 19 20 Drive Gear SW Lever Clamper Plate Bridge Clamper VNL1923 VNL1925 VNE2251 VNE2252 VNL1924 6 7 8 9 10 Flexible Cable (26P) Connector Assy 2P Float Rubber Belt Stabilizer VDA1864 VKP2253 VEB1327 VEB1330 VNE2253 21 22 23 Screw Screw Tray JGZ17P028FMC Z39-019 VNL1920 11 12 13 14 15 Loading Base Float Base DVD Drive Cam Gear Pulley Loading Gear VNL1917 VNL1918 VNL1919 VNL1921 VNL1922 NSP 1 2 3 4 5 E Description XV-EV51 12 1 2 3 4 5 6 7 8 Application of Lubricant A Lubricating Oil GYA1001 Around the shaft No. 11 Loading Base B Lubricating Oil GYA1001 No. 13 Drive Cam Lubricating Oil GYA1001 Lubricating Oil GYA1001 C Inner side of a ditch Inner side of a ditch Lubricating Oil GYA1001 Lubricating Oil GYA1001 Daifree GEM1036 Concave of unevenness No. 23 Tray No. 13 Drive Cam Top View Rear View D Daifree GEM1036 Concave of unevenness No. 23 Tray Inner side of a ditch Daifree GEM1036 Bottom View Top View Concave of unevenness E Side of the rib Daifree GEM1036 Daifree GEM1036 F XV-EV51 5 6 7 13 8 1 2 3 4 2.5 TRAVERSE MECHANISM ASSY A 17 (Torque : 0.12 ± 0.01 N•m) Silicone Adhesive GEM1037 12 8 3 18 18 10 B 18 7 10 14 9 1 6 19 C Silicone Adhesive GEM1037 4 (Adjustment Screw) 13 17 (Torque : 0.12 ± 0.01 N•m) 16 To DVDM CN8 15 5 D Screw Tight GYL1001 5 To SSIB CN1 Silicone Adhesive GEM1037 17 (Torque : 0.12 ± 0.01 N•m) 16 2 E 11 CONTACT SIDE NON-CONTACT SIDE To DVDM CN4 F XV-EV51 14 1 2 3 4 5 6 7 8 TRAVERSE MECHANISM ASSY parts List Mark No. > Description Part No. 1 2 3 4 5 Spindle Motor Stepping Motor Pickup Assy-S Skew Screw Skew Spring VXM1088 VXM1090 OXX8004 VBA1080 VBH1335 6 7 8 9 10 Guide Bar Sub Guide Bar Hold Spring Joint Spring Support Spring VLL1514 VLL1515 VNC1017 VNC1019 VNC1020 Mechanism Chassis Slider Spacer Joint FFC Holder VNE2248 VNL1811 VNL1913 VNL1914 VNL1915 Screw Tapping Screw Screw Damper Sheet BBZ20P050FZK OBA8009 PMA26P100FMC VEB1335 NSP 11 12 13 14 15 16 17 18 19 A B C D E F XV-EV51 5 6 7 15 8 1 2 3 4 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM 3.1 BLOCK DIAGRAM A 3.1.1 SIGNAL ROUTE(1/2) B IF ASSY CN5903 Refer to 3.1.2 SIGNAL ROUTE(2/2) CN B F DVDM ASSY (D) CN5901 G DVD IF ASSY (V) (Y) (C) 16,17 C CN5801 E DECK ASSY (D) EV-51 : PDC093 EV-21 : PDC097 8 4 3 7 5,6 CN5509 D 16 2 PBL RECL 17 CN2506 (REC) DISP1 ASSY CN5101 J E 8 4 3 7 5,6 H DSP ASSY XV-EV51 Only F XV-EV51 16 1 2 3 4 5 6 7 8 A SIGNAL ROUTE (SL) (PB) : PB SIGNAL (FL) : RECORDING SIGNAL (C) : AUDIO SIGNAL (TUNER) (SW) (REC) (TX) (V) (V) (Y) (Y) (C) (C) C : V SIGNAL VIDEO : SL AUDIO SIGNAL : FL AUDIO SIGNAL : C AUDIO SIGNAL (D) : SW AUDIO SIGNAL : DIGITAL AUDIO ROUTE : Y SIGNAL VIDEO : C SIGNAL VIDEO AF ASSY M CN5504 CN8101 (PB) B MIC ASSY (TX) (PB) JA5401 J5401 (PB) M-EV51 (POWER AMPLIER) Service Manual Order No.RRV2663 CN8301 CN5503 (REC) CN8901 (PB) C (TX) CN5501 CN8701 D A CN3002 FM/AM TUNER MODULE E F XV-EV51 5 6 7 17 8 1 2 3.1.2 SIGNAL ROUT(2/2) 3 Work RAM for Error Correction IC302 K6T1008V2E-TB70 X301 1M SRAM 20MHz A 4 X601 27MHz Work RAM for MPEG Decode IC604 K4S641632F-TC75 64M SDRAM 2 6 5 3 IC605 TC7WU04FU 1 RF(TP) Spindle Motor PICKUP ASSY 10 A 12 B 18 C 16 D 25 E 24 F 7 6 12 11 8 10 B2 B3 B4 A C FDO TDO 3 20 IN4IN3- B T_RTN T_DRV F_RTN 24 25 26 23 F_DRV Stepping Motor (Carriage) M C (4P) ST1ST1+ – M + 3.3V CN602 (2P) S101 IC351 IN5- 17 M56788AFP FTS Driver Focus, Tracking, Stepper and Loading Drive PCMDATA0 52 LOAD_DRV 5 35 31 32 15 IC601 STI5519AVB-B0C BACK END IC • System Control • MPEG Video Decode • Video Encode • Video DAC • Audio Decode (MP3, Dolby) • Sub-picture Decode SPDIF CN9 (5P) 1 2 LOD+ 2 3 SW2 5 SW1 3 XCLOSE 205 XCLOSE 5 OPEN 204 OPEN D LOAB ASSY 57 2 9 H1+ H2+ 6 H2- 7 12 H2- H3+ 8 H3- 9 D 13 H3+ 14 H3- A1 3 A2 2 7 A1 4 A2 A3 1 IC251 BA6664FM Spindle Driver • Spindle Drive • FG Detection FG 24 FG EC 22 IC603 VYW1948 8M FLASH ROM SPDL PDM F 2 A3 3 DVDM ASSY CN401 (13P) E F XV-EV51 18 1 2 A_BCK A_MCLK A_LRCK 22 21 24 26 (30P) (12P) 10 H111 H2+ 15 A_DATA0 CN22 CN2 H1+ 4 H1- 5 5 7 4 14 1 LOD- PCKCLK 55 LRCLK 56 2 1 116 HSYNC _PWM0 DAC_SCLK 51 3 4 9 Q604 11 Q603 13 CV_OUT 34 Q602 SPDL PDM 3 (5P) 2 FG PIO381 7 PIO382 8 LETTER Q607 B_OUT 25 Q606 G_OUT 26 R_OUT 27 Q605 C_OUT 33 4 CN601 1 34 16 S_DATA (26P) SQUEEZ Y_OUT 32 VM1+ VM1- VM2- VM2+ VM5- VM5+ CN4 ST2+ ST2Loading Motor Assy 13 VM412 VM4+ 10 VM3+ 9 VM3- 3 2 1 4 FE_DATA PC(2) PC(6) 38 42 FACT TACT 123 124 CN25 120 PIXCLK IC301 L6315ATXXTY OUT_DATA(0) 84 FRONT END IC • RF Demodulation • Servo Control • Servo Decode • Error Correction (26P) B1 20 21 15 16 19 17 3 RFSACD CN151 (26P) 131 132 FREOUT FREIN 3 4 DOUT 1 5 6 7 8 1– =: Refer to "3.1.3 WAVEFORMS". G DVD IF ASSY A CN1902 (16P) CN1962 B 5 7 13 S_Y S_C 14 Cb IN 12 CY IN 16 Cr IN 6 Y IN 2 C IN V 15 4 V IN • LPF • AMP • Driver VOUT a 30 COUT 33 VOUT b 31 CYOUT b 25 Y 10 C V 12 C822 7 C812 6 8 8 G 12 CYOUT a 24 22 CrOUT b 19 21 9 R B 16 CrOUT a 18 24 CbOUT b 22 10 B 14 CbOUT a 21 26 R721 R722 2 5 6 CN1901 1 BCKIN 2 DATA 1 (30P) IC711 Vout L PCM1742KE Audio 2ch DAC 7 3 4 28 AUDIO OUT 16 MCLK R723 LOUT Vout R 8 ROUT 30 3 LRCKIN CN1961 DIGITAL OUT (30P) 1 B CN5903 9 11 G R IC801 MM1567AJ 6 IN • 6 OUT VIDEO AMP YOUT a 27 C832 CN5901 YOUT b 28 3 4 11 B (26P) C 24 3.1.3 WAVEFORMS Note : The encircled numbers denote measuring point in the schematic diagram. F DVDM ASSY Measurement condition : No. 1 and 2 : reference A1 (DVD), T2-chp 19, Color-bar 1 IC301 - pin 3 [RF] V: 200mV/div. H: 0.1µsec/div. 2 IC251 - pin 24 [FG] V: 1V/div. H: 5msec/div. 3 IC251 - pin 2, 4, 7 [Spidle driver -A3, A2, A1] V: 2V/div. H: 2msec/div. D GND 4 [PLAY] IC301 - pin 42 [SPDL_PDM] [STOP→PLAY→STOP] Accelertar ON STOP PLAY [STOP] Brakes ON V: 2V/div. H: 1sec/div. 5 [PLAY] E STOP V: 2V/div. H: 500nsec/div. IC601 - pin 116 [LOAD_DRV] [Tray stops] V: 1V/div. H: 5µsec/div. [Tray is opening] V: 2V/div. H: 500nsec/div. [Tray is closing] F XV-EV51 5 6 7 19 8 1 2 3 4 3.2 OVERALL WIRING DIAGAM A 3.2.1 OVERALL WIRING DIAGRAM(MEDIA PART 1/2) Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST" CN8701 CN8901 XV-EV51 Only XV-EV51 Only B CN5902 CN8001 C 1/2 - 2/2 AF ASSY (XWZ3618 / XV-EV51) (XWZ3628 / XV-EV21) CN8101 DSPCK DSP ASSY C MIC ASSY (XWZ3626/ XV-EV51) (XWZ3623/ XV-EV21) M D J5401 (AWZ8059 / XV-EV51) K DSPRQ DSPRO DSPCS CDCOVF CN8002 DIRRX1 DIRRX2 DIRRX3 DIRRX4 DIRTX CN5507 CN8751 XDSPRST CN8003 CN8301 ADCR ADCL CN5506 E (XWZ3622) LED ASSY L CN5101 I DISP3 ASSY DISP2 ASSY (XWZ3621) (XWZ3620) J5102 H 5301 J5202 J F CN5203 CN5508 CN5102 DISP1 ASSY (XWZ3619) J5203 XV-EV51 20 1 2 3 4 5 6 7 8 A M-EV51 CN3001 (STEREO POWER AMPLIFIER) Service Manual order no. RRV2663 CN5502 CN5701 CN201 DECK MECHA. (XYM3015) A ERASE HEAD B REC/PB HEAD XDD3115 CN5501 (AXQ7228) CN3002 FM/AM TUNER MODULE XV-EV51 Only CN5801 CN5503 CN2301 IF ASSY CN2302 (XWZ3617 / XV-EV51) (XWZ3627 / XV-EV21) E CN5802 CN2506 CN5903 DECK ASSY (XWX3067 / XV-EV51) (XWX3066 / XV-EV21) D DVD IF ASSY XDD3116 IF ASSY G DVD (AWM7677) (AWM7684) CN1961 CN1901 DVDM ASSY CN5504 F 1/2 - 2/2 B C E DVD IF ASSY CN1962 CN5505 CN1902 CN5509 CN5901 XDD3117 F XDD3113 XV-EV51 5 6 7 21 8 1 2 3 4 3.2.2 OVERALL WIRING DIAGRAM (MEDIA PART 2/2) A F 1/2 - 2/2 DVDM ASSY (AWM7684) (F) (T) DVD IF ASSY : SLIDER SERVO LOOP LINE G B : TRACKING SERVO LOOP LINE (AWM7677)/CN1961 (S) : FOCUS SERVO LOOP LINE (F) PICKUP ASSY-S (OXX8003) (F) (F) C (F) (T) (T) (F) (F) (F) (F) (F) (T) (T) DVD IF ASSY D (AWM7677)/CN1962 (F) STEPPING MOTOR : VXM1090 (S) (S) SPINDLE MOTOR : VXX1088 G (S) (S) D LOAB ASSY (VWG2346) LOADING MOTOR ASSY : VXX2505 E F A D B C D E XV-EV51 22 1 2 3 4 5 6 7 8 3.1.3 WAVEFORMS A Note : The encircled numbers denote measuring point in the schematic diagram. F DVDM ASSY Measurement condition : No. 1 and 2 : reference A1 (DVD), T2-chp 19, Color-bar 1 IC301 - pin 3 [RF] V: 200mV/div. H: 0.1µsec/div. 2 IC251 - pin 24 [FG] V: 1V/div. H: 5msec/div. 3 IC251 - pin 2, 4, 7 [Spidle driver -A3, A2, A1] V: 2V/div. H: 2msec/div. GND 4 [STOP→PLAY→STOP] Accelertar ON STOP PLAY [PLAY] [STOP] V: 2V/div. H: 500nsec/div. V: 2V/div. H: 500nsec/div. [Tray is opening] [Tray is closing] Brakes ON STOP V: 2V/div. H: 1sec/div. 5 B [PLAY] IC301 - pin 42 [SPDL_PDM] IC601 - pin 116 [LOAD_DRV] V: 1V/div. H: 5µsec/div. [Tray stops] C G DVD IF ASSY Measurement condition : No. 1 to 6 : reference A1 (DVD), T2-chp 1 No. 7 to 12 : reference A1 (DVD), T2-chp 19, Color-bar 1 IC711 - pin 16 [AUDIO DAC -MCK] V: 1V/div. H: 20nsec/div. 2 IC711 - pin 1 [AUDIO DAC -BCK] V: 2V/div. H: 200nsec/div. 3 IC711 - pin 3 [AUDIO DAC -LRCK] V: 2V/div. H: 5µsec/div. 7 Foot of C812 (IC801 - pin 30, 31) [Composite Video output] V: 1V/div. H: 10µsec/div. D GND 4 IC711 - pin 3 [AUDIO DAC -LRCK] V: 2V/div. H: 500nsec/div. 5 IC711 - pin 1 [AUDIO DAC -BCK] V: 2V/div. H: 500nsec/div. 6 IC711 - pin 2 [AUDIO DAC -DATA] V: 2V/div. H: 500nsec/div. E 4 5 8 Foot of C842 (IC801 - pin 24, 25) [Component Video output -Y] V: 1V/div. H: 10µsec/div. 9 Foot of C852 (IC801 - pin 18, 19) [Component Video output -Cb] V: 2V/div. H: 10µsec/div. 10 6 8 11 Foot of C832 (IC801 - pin 27, 28) [S Video output -Y] V: 1V/div. H: 10µsec/div. 12 Foot of C822 (IC801 - pin 33) [S Video output -C] V: 1V/div. H: 10µsec/div. 11 12 9 Foot of C862 (IC801 - pin 21, 22) [Component Video output -Cr] V: 2V/div. H: 10µsec/div. F 10 A B C D XV-EV51 5 6 7 23 8 1 2 3 4 3.3 FM/AM TUNER MODULE A A FM/AM TUNER MODULE (AXQ7228) B (FM) FM FRONT END (FM) (FM) (FM) (FM) (FM) (FM) C (FM) (AM) (FM) (AM) (FM) D (AM) (AM) (AM) MW RF TUNING BLOCK (AM) OSC : 981 - 2052kHz 9k step E F A XV-EV51 24 1 2 3 4 5 6 7 8 A : The power supply is shown with the marked box. (TX) (AM) (FM) : AUDIO SIGNAL ROUTE (TUNER) : AM SIGNAL ROUTE : FM SIGNAL ROUTE (AM) CN5701 (AM) (AM) B (AM) (AM) (TX) (FM) C (AM) (FM) (AM) B (AM) (TX) (TX) CN201 (TX) (FM) (FM) (TX) (AM) L201 ATE7003 D E F A XV-EV51 5 6 7 25 8 1 2 3 4 3.4 IF ASSY G IF ASSY (XWZ3617 / XV-EV51) (XWZ3627 / XV-EV21) CN1902 (V) CN5502 (V) (S_C) CN5902 CN5901 (S_Y) B A (S_C) (S_Y) (S_Y) B CN8901 CN5503 C K CN8001 C 2/2 CN5507 (TX) CN5504 EV- EV51 21 CN8101 D K CN8002 C 2/2 (D) (CD) EV-51 EV-21 CN5506 EV-51 Only E XV-EV51 ONLY (CD) CN5505 XV-EV21 Only F G CN1902 (D) B XV-EV51 26 1 2 3 4 (CD) CN5903 C 2/2 K CN8003 CN8751 CN5508 5 6 7 8 A TO M-EV51 or M-EV21 Power Amplfier CN5501 : The power supply is shown with the marked box. B C CN201 CN5701 A (TX) EV-51 EV-21 CN5801 CN5509 E E CN2506 EV-51 SIGNAL ROUTE (CD) (V) : CD AUDIO SIGNAL ROUTE XV-EV21 Only : V SIGNAL ROUTE : AUDIO SIGNAL ROUTE (TUNER) J CN5101 F (S_C) (TX) : S-VIDEO OUT C SIGNAL ROUTE (S_Y) (D) : DIGITAL SIGNAL ROUTE : S-VIDEO OUT Y SIGNAL ROUTE XV-EV51 5 To. Mecha Deck EV-51 CN5802 D 6 7 B 27 8 1 2 3 4 3.5 AF ASSY(1/2) A (AUX) (TX) (TX) (AUX) C B (TX) 2/2 (AUX) (CD) (AUX) (PB) (REC) (PB) CN8101 (CD) (REC) B CN5504 C (REC) (CD) (REC) (TX) (CD) D XV-EV51 Only (REC) (TX) E EV-51 EV-21 (REC) F (REC) C 1/2 XV-EV51 28 1 2 3 4 5 6 7 8 SIGNAL ROUTE (PB) : PB SIGNAL (CD) (REC) (CD) : RECORDING SIGNAL (TX) (MIC) : AUX SIGNAL : MIC OUT SIGNAL : AUDIO SIGNAL (TUNER) (CD) JA8401 A (AUX) : CD SIGNAL (CD) C 1/2AF ASSY CN8301 (XWZ3618 / XV-EV51) (XWZ3628 / XV-EV21) (MIC) M J5401 B C 2/2 (MIC) C D (MIC) (TX) (MIC) (REC) (TX) (REC) C (REC) 2/2 EV21 Only E XV-EV51 Only C 2/2 (REC) (REC) (REC) F : The power supply is shown with the marked box. C 1/2 XV-EV51 5 6 7 29 8 1 2 3 4 C 1/2 3.6 AF ASSY(2/2) A (MIC) (MIC) SIGNAL ROUTE (MIC) : MIC SIGNAL (TX) : AUDIO SIGNAL (TUNER) C 1/2 B XV-EV51 Only C CN8751 B CN5505 D E F C 2/2 XV-EV51 30 1 2 3 4 5 6 7 8 C 2/2AF ASSY (MIC) A (XWZ3618 / XV-EV51) (XWZ3628 / XV-EV21) (MIC) CN8901 (TX) CN5503 B (MIC) B (MIC) (TX) XV-EV51 Only C C 1/2 CN8701 To M-EV51 Power Amplfier (TX) D E F : The power supply is shown with the marked box. C 2/2 XV-EV51 5 6 7 31 8 1 2 3 4 3.7 DECK ASSY A (PB) E DECK ASSY (XWX3067/XV-EV51) (XWX3066/XV-EV21) CN2301 (PB) CN2302 B (REC) (REC) (REC) C (REC) (REC) D E F E XV-EV51 32 1 2 3 4 5 6 7 8 A : The power supply is shown with the marked box. (PB) (PB) (PB) (PB) B (PB) (REC) EV51:-16.3dBV EV21:- 6.5dBV (REC) (REC) C EV-51 EV-21 D SIGNAL ROUTE (PB) : PB SIGNAL (REC) : RECORDING SIGNAL (PB) (REC) E CN2506 B CN5801 F E XV-EV51 5 6 7 33 8 1 2 3 4 F 2/2 3.8 DVDM ASSY(1/2) (S) (S) (S) F 1/2 DVDM ASSY (AWM7684) (S) A D B (T) (T) (F) (F) CN601 PICKUP ASSY-S C D (RF) (RF) (RF) (RF) (RF) (RF) (F) (T) (T) (F) (F) (T) (T) STEPPING MOTOR (T) (S) (S) (S) (S) 3 SPINDLE MOTOR E 2 F F 1/2 XV-EV51 34 1 2 3 4 5 6 7 8 A 1,2,3,4 : Refer to "3.1.3 WAVEFORMS". (RF) : RF SIGNAL ROUTE : DATA SIGNAL ROUTE (F) (T) (S) : FOCUS SERVO LOOP LINE : TRACKING SERVO LOOP LINE : SLIDER SERVO LOOP LINE B F 2/2 C IC302 K6T1008V2E-TB70 WORK SRAM (1M) 1 (RF) D 4 (RF) E : The power supply is shown with the marked box. F F 1/2 XV-EV51 5 6 7 35 8 1 2 3 4 3.9 DVDM ASSY(2/2) F 2/2 A DVDM ASSY (AWM7684) B IC603 VYW1848 (MBM29LV800TA-90PFTN) PGM 8M FLASH MEMORY 5 C (V) (D) (S_C) (D) (D) (S_Y) E (R/Cr) (B/Cb) (G/Y) D F F 2/2 F 1/2 XV-EV51 36 1 2 3 4 5 6 7 8 : The power supply is shown with the marked box. A 5: Refer to "3.1.3 WAVEFORMS". B CN1961 G C (D) (D) IC604 K4S641632F-TC75 64M SDRAM (V) G (S_Y) (V) CN1962 (V) (S_C) (S_C) (S_Y) (R/Cr) (R/Cr) (G/Y) (B/Cb) (G/Y) (B/Cb) D (V) (R/Cr) (R/Cr) : DATA SIGNAL ROUTE (S_C) (V) (S_C) : V SIGNAL ROUTE (S_C) E : S-VIDEO OUT C SIGNAL ROUTE (S_Y) (G/Y) : S-VIDEO OUT Y SIGNAL ROUTE (G/Y) (R/Cr) : R/Cr SIGNAL ROUTE (G/Y) : G/Y SIGNAL ROUTE (B/Cb) : B/Cb SIGNAL ROUTE (S_Y) (S_Y) : AUDIO SIGNAL ROUTE (D) (B/Cb) : AUDIO (DIGITAL) SIGNAL ROUTE (B/Cb) F F 2/2 XV-EV51 5 6 7 37 8 1 2 3 4 3.10 DVD IF ASSY A G DVD IF ASSY (AWM7677) (D) (D) F 2/2 CN21 B (D) C (D) (S_C) (S_C) (S_C) (V) (V) (S_Y) (V) (S_Y) (S_Y) D (G/Y) (G/Y) (G/Y) (B/Cb) (B/Cb) F 2/2 CN25 (R/Cr) (S_C) (B/Cb) (R/Cr) (R/Cr) (V) (S_Y) (R/Cr) E (G/Y) (B/Cb) (G/Y) (B/Cb) F G XV-EV51 38 1 2 3 4 5 6 7 (V) 8 A (R/Cr) : V SIGNAL ROUTE : R/Cr SIGNAL ROUTE (S_C) : S-VIDEO OUT C SIGNAL ROUTE (S_Y) : S-VIDEO OUT Y SIGNAL ROUTE (G/Y) : G/Y SIGNAL ROUTE (B/Cb) : B/Cb SIGNAL ROUTE : AUDIO SIGNAL ROUTE (D) (D) (D) 2 5 : AUDIO (DIGITAL) SIGNAL ROUTE 1 6 B 3 4 (D) B CN5903 C (V) (S_C) (D) (S_Y) D (G/Y) (B/Cb) (S_C) (S_C) (S_Y) (S_C) (V) (S_Y) (G/Y) (S_Y) (G/Y) (B/Cb) (B/Cb) (R/Cr) E B (V) CN5901 (R/Cr) (B/Cb) (R/Cr) (R/Cr) 1, 2, 3, 4, 5, 6: Refer to "3.1.3 WAVEFORMS" F : The power supply is shown with the marked box. G XV-EV51 5 6 7 39 8 1 2 3 4 3.11 DISP1, DISP2, DISP3 and LED ASSYS A L LED ASSY (XWZ3622) CN5203 J5203 B I J DISP 2 ASSY (XWZ3620) DISP 1 ASSY (XWZ3619) C B CN5509 CN5101 D J5102 CN5102 I E DISP 1 ASSY S5101: Sound Mode S5102: EV-51_Karaoke EV-21_Vlrtual Surround S5103: ST Memory S5104: Enter S5105: Display S5106: TIME/CLOCK ADJ F I J L XV-EV51 40 1 2 3 4 5 6 7 8 A J CN5102 J5102 B J5202 I DISP 2 ASSY (XWZ3620) C H DISP 2 ASSY S5201: PLAY S5202: VOL S5203: ( - ) S5204: DVD / CD S5205: STOP S5206: VOL + S5207: ( + ) S5208: TAPE S5209: LINE 1 S5210: OPEN/CLOSE S5211: TUNNER DISP 3 ASSY (XWZ3621) J5202 D DISP 3 ASSY S5301: ASES S5202: DOBLY NR S5203: REV MODE S5204: REC/STOP E : The power supply is shown with the marked box. F H I XV-EV51 5 6 7 41 8 1 2 3 4 3 4 3.12 DSP ASSY A K DSP ASSY (AWZ8059) XV-EV51 : Only B C D E F K XV-EV51 42 1 2 5 6 7 8 A B CN5503 B B CN5506 C CN5504 D B E F : The power supply is shown with the marked box. K XV-EV51 5 6 7 43 8 1 2 3 4 3 4 3.13 MIC ASSY A M MIC ASSY (XWZ3626 / XV-EV51) (XWZ3623 / XV-EV21) B JA5401 EV-51 EV-21 JA5402 C D E F M XV-EV51 44 1 2 5 6 7 8 A C CN8301 B J5401 C D E F M XV-EV51 5 6 7 45 8 1 2 3 4 4. PCB CONNECTION DIAGRAM 4.1 LOAB ASSY A NOTE FOR PCB DIAGRAMS : 1. Part numbers in PCB diagrams match those in the schematic diagrams. 2. A comparison between the main parts of PCB and schematic diagrams is shown below. Symbol In PCB Diagrams Symbol In Schematic Diagrams B C E B C E B Part Name 3. The parts mounted on this PCB include all necessary parts for several destinations. For further information for respective destinations, be sure to check with the schematic diagram. 4. View point of PCB diagrams. Connector Capacitor Transistor B C E B C E B C SIDE A E Transistor with resistor B C E D G S D G S Field effect transistor D G S P.C.Board Chip Part SIDE B Resistor array C 3-terminal regulator SIDE A D D SIDE B D LOAB ASSY LOAB ASSY (VNP1837-B) (VNP1837-B) CN602 M E CN601 CN601 CN602 F CN9 LOADING MOTOR ASSY F D XV-EV51 46 1 2 3 4 5 6 7 8 4.2 FM/AM TUNER MODULE SIDE A SIDE B A FM/AM TUNER MODULE A SIDE A B C CN201 (ANP7338-B) B CN5701 Q202 A FM/AM TUNER MODULE SIDE B D E (ANP7338-B) Q201 IC201 Q203 IC202 F Q205 Q204 A A XV-EV51 5 6 7 47 8 XV-EV51 4 VNP1866 E88558 ND SIDE CN25 CN22 1 R541 R621 R622 R624 R623 R625 R559 R558 R555 R556 C316 R619 R620 CN25 CN22 G CN1962 G CN1961 C313 R401 D301 A C628 C621 R617 R545 Q605 C609 R612 R551 R552 R553 C607 R670 C608 Q607 Q606 Q603 Q604 R398 Q602 CN11 1 1 26 4 IC601 B 53 1 R582 C611 R340 R584 R339 R585 R575 R399 CN601 C625 C321 IC301 C328 C622 R563 C612 R662 R317 R316 23 C624 1 157 C335 R502 R501 R503 R588 104 156 C R613 CN12 R400 26 CONTACT SIDE CN21 1 1 R571 R572 R562 C610 CN23 V+5V CONTACT SIDE 3 IC303 C342 C315 26 L308 L310 2 C317 48 52 A 72 1 C603 E C616 R600 C623 156 C323 F 23 CN602 24 B R310 R309 E C327 C322 R641 C340 R569 C333 C641 R322 C615 C613 R304 C651 R330 R632 C302 R631 R305 C301 C332 C326 R332 R566 R565 D Q602 4 01 IC601 C329 1 108 F Q604 Q603 73 208 10 3 R300 157 1 1 23 1 105 B Q605 R306 Q607 Q606 23 DVDM ASSY R301 1 E 24 C 2 D 24 2 F R589 C626 R587 R586 R583 C650 R642 C606 R630 R581 1 R580 R578 R564 R576 R546 2 R574 CN603 C605 A 2 R643 R567 1 4 4.3 DVDM ASSY SIDE A IC303 IC301 109 1 1961 6 R156 C107 B 30 30 SECOND SIDE R380 R328 C103 R146 R145 CN22 R362 R158 R144 R147 C106 R400 CONT R157 R3 R4 1 5 22 CN8 CN7 2 1 RF Q102 GND 26 25 R302 R354 R378 C362 F R377 R391 C250 C391 C361 Q101 22 V+5S 21 R392 R338 C401 11 5 R361 R358 C357 C108 CN9 R359 C360 R360 R133 R140 R137 R136 C338 1 C339 C343 4 C351 1 R353 R351 C324 36 C331 37 F A C CONTACT SIDE CN2 C255 C248 C249 CN5 FC DC C259 R301 R255 R254 C256 R259 R258 R257 R256 R632 C302 R631 R305 C301 C332 C326 R332 6 7 CN4 C330 R365 IC351 R357 R366 IC303 C342 C315 4 1 C R303 R333 IC110 IC111 1 R155 C311 C105 C109 R396 R395 C R394 R393 C373 C325 C366 C313 R401 D301 C365 C334 R300 C329 37 C104 X301 41 780 1 650 R123 5 R121 58 26 8 14 17 144 CN90 C251 C258 R261 C257 R329 R379 C359 12 1 15 R368 30 1 28 R355 R370 IC251 R372 R371 IC111 1 5 29 IC251 IC110 C353 IC301 R266 5 7 8 SIDE A CN9 D CN601 F XV-EV51 8 49 A IC351 Q101 Q102 B CN2 SPINDLE MOTOR C CN4 STEPPING MOTOR D CN8 PICKUP ASSY E 30 (VNP1866-D) F R337 R336 R385 R384 C318 R407 R673 R405 9 R153 C309 C405 C403 C404 Q105 R151 R152 C413 30 C310 HEAT-RESISTANCE R179 R178 R177 R176 PRE-FLAX R129 R128 R127 R126 SIDE 4 6 R1 R2 R406 3 1 R141 R139 R142 C111 VREF21 C412 4 C643 R331 L311 L300 C308 IC304 R319 R318 C341 R113 R150 R149 C113 C149 R111 R138 C102 R115 R125 Q103 C112 C101 C110 R110 25 1 R118 71 17 R346 R154 V+3R5D 23 1 1 NORMAL SOLDER LEAD FREE SOLDER 2 4 8 R344 R356 26 R100 F 9 R321 1 9 8 7 6 5 4 3 2 C B A C307 Q300 C305 R375 R374 R367 R376 R345 C368 4 V+5S C369 R315 12 IC Q105 Q103 R320 C253 B IC302 C304 GNDM V+6B CN4 C157 1 1 5 3 2 1 3 26 CN8 XV-EV51 50 1 CN22 CN9 F V+12M R341 CN4 C148 R171 R172 C158 E 4 C254 CN2 CN2 C 6 D DVDM ASSY F SIDE B A 4 3 2 1 Q300 IC302 R262 R265 R364 R326 R373 R327 R577 R547 R579 R590 R504 R653 R602 C630 R601 R668 R654 C619 R560 1 6 3 4 1 84 D601 L601 R616 C617 R561 R554 R543 R702 C648 R720 1 R557 E R718 R542 24 C632 1 R648 1 R645 R646 C633 23 4 5 C614 71 C634 R647 R618 R640 Q601 C631 R639 C629 R544 R666 R652 Q652 R671 R650 1 R651 Q651 R695 C635 R505 C637 R699 C699 C698 C618 C620 R719 R717 R689 R686 R683 R691 R680 R690 R677 R688 R674 R687 C645 R685 R684 R681 R682 R678 R679 R675 R676 VWS1 0 AWM7 1 2 26 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 R660 0 1 2 3 4 5 6 7 8 9 V+2R5 R313 R311 1 16 C404 R659 J Q CN R314 C638 28 L602 9 R337 R336 C414 C643 C318 8 51 7 IC603 8 25 R638 54 9 IC603 IC605 D C636 R626 R312 R385 R384 (VNP1866-D) F CN25 IC605 R570 R568 27 R331 L311 X601 L603 1 IC604 C627 R610 C697 R609 R607 R608 R605 R606 L324 C319 R334 R335 L300 C308 IC304 R319 R318 A- 6 5 0 1 R604 R603 C696 C R320 C307 8 3 2 1 0 7 6 5 4 3 2 1 0 0 1 Q652 Q601 IC604 IC304 8 7 6 5 F XV-EV51 A SIDE B Q651 B C309 R40 R673 1N FIRST SIDE C1974 C1973 F CN22 CN1961 Rch C1931 C1932 DOUT R1992 UPSIDE 26 V+3.5 V+2.5 L1981 R1925 R1928 R1929 R1930 C1918 CONTACT C1922 C1925 C1926 IC1905 CN1962 1 1 C1910 C1917 L1903 C1947 CN1963 C1955 C1950 C1948 C1916 C1990 C1909 R1904 DVD IF UNIT AWM7677 C1943 C1941 F CN25 26 C1972 R1926 R1924 C1929 IC1921 Lch V+6M C1915 4 4 IC1904 1 1 (ANP7425-A) D D1902 44 55 R1902 C1914 D1901 R1901 11 8 C1912 4 3 IC1905 CN1962 CN1961 11 C1971 C1923 8 8 R1993 3030 C1981 C1930 R1927 1 1 GNDA R1932 R1931 NE M B1 C1979 C1977 C1975 C1980 C1978 C1976 C1996 9 9 V+12 11 1616 IC1903 C1908 IC1906 C1992 GNDM GNDD C1903 C1994 IC1906 C1997 C V+5D C1995 16 16 FC ICT B IC1901 C1902 XV-EV51 52 R1983 R1982 C1906 V+5V E CN1902 B CN5901 IC1902 VPRE+5 VPRE+5M Q1901 C1919 C1911 D CN1902 C1905 C 2 1 SIDE A SIDE A A 4 3 2 1 4.4 DVD IF ASSY G DVDIF ASSY F G UPSIDE CONTACT A B C1993 IC1902 C1991 IC1903 C1907 IC1901 V+3.3 R1981 C1928 R1903 L1901 C1945 IC1904 1/4 5 6 7 8 SIDE B SIDE B A G DVD IF ASSY 1091NC CN1901 30 30 1 1 B 3191C UPSIDE CONTACT 0491R 5391D 4391R 5391R 41 41 4091C 2691C 2691CI 1091C 4391D 1491R 8991C 7891R 2091L Q1922 1291R 17 6591C 4591C 8091R 6391R 3391C 9391R 1391D 9891C 2891C 2591C 17 D IC1941 Q1941 3491R 5491R IC1889 6891R 5091R 1291C 8391R 9991C 1 0291C 7391R 6091R 7091R 5891R 5891C 3891C 4891C Q1942 8891R 1491Q 4491R 2491Q IC1961 5 7891C 6891CI 6891C 8891C 7291C 5991R 18 18 9491C C 1691CI 2691R 7 7 3591C 2591R 8 8 11 1 3291R 0291R 4991R 7591C 1591C 1491CI 1 Q1961 IC1962 1691R 9691R C B A 3391R 6491R 1 Q1932 Q1921 4291C 34 5791R 3691R 7691R 1691C 14 14 2291R 34 3391D 1691Q 2791R 0 0 9 8 7 6 5 4 3 2 1 0 1 1 3 2 1 0 CN1961 8 8 Q1931 3691C 1 6691R 0791R 1291Q 2291Q CN1962 1 1 5691R 4691R 8691R 4791R 2391D 1791R 7 7 2391Q 1391Q 2491R 1191R 2191R E (ANP7425-A) F G XV-EV51 5 6 7 53 8 4 E 123.0 C D A DISP FFC For Binder 1 W216 W217 CN5801 W218 W219 W208 W209 W210 W212 W211 CONTACT SIDE W225 W227 C5713 OPEN E W234 W235 W236 C5953 Q5806 W482 W251 VDET W271 W272 W273 W275 W276 V+8V CONTACT SIDE 30 SYSDIN SYSCLK W246 W245 W247 W279 W278 VE+5V TEST W287 D5701 W284 W288 C5958 SYSDOUT C5702 CN5505 W277 W248 W249 W252 W254 W255 W258 W256 W257 Q5701 C5959 W281 C5956 B W250 W262 C5701 W260 W263 PRINTED SIDE W213 W237 W231 DSPMUTE CDL R5913 CDR W259 VM+12V VD+5V 1 VD+5V W253 11 1 W480 W261 GNDA W232 13 W229 W233 W214 W215 R5712 10 2SD2012 L5701 R5807 W230 W228 10 11 1 VA+12V W481 D5703 W286 W280 W264 ST/TUNE KEY1 KEY2 KEY3 W289 W290 R5953 1.FLASH E/D 2.FLASH DO 3.FLASH CLK 4.XRESET 5.VE+56 6.GNDU 7.NC V+5BU W299 W297 W296 W298 W301 GNDU R5957 IC5501 GNDU W300 X5501 W283 W495 OPEN VA+12V VM+12V W311 W313 D5506 D5507 C5504 W493 W484 16.VOCALC 15.VOCALB 14.VOCALA 13.ASSELB W339 12.ASSELA W340 W341 1 C5528 W343 W349 W322 W380 W381 W382 W348 16 W347 W500 W370 W372 W373 W375 W379 C5902 C5904 CONTACT SIDE W378 D5511 SPCONT EVOLCLK PROTECT 3.FRP 2.FRN 1.KEY4 4.FLN W371 W376 W377 C5530 C5531 W374 W499 20.UN+56 19.VA-12V 18.AC 17.GNDD 16.GNDD 15.GNDM 14.VU+12V 13.VU+5V 12.VU+5V 11.PROTECT 10.EVOL-CE 9.EVOL-DATA 8.EVOL-CLK 7.SPCON 6.GNDA 5.FLP CN5507 EVOLCS SPDIF W498 W368 GNDM IN W395 IC5508 EVOLDATA AC W354 W355 IC5591 W369 CN5503 W351 OPEN W367 W350 W352 W353 W384 W491 W479 5 CH C5526 EXPCS W344 W345 W478 W331 11.CDL 10.GNDA 9.CDR 8.GNDA 7.RECR 6.PBR 5.GNDA 4.PBL 3.RECL 2. AUXMUTE 1. ATTCONT W342 C5718 C5717 W364 NJM78M56FA OUT A W393 W396 W383 GNDC GNDV KN5501 7.NC 6.GNDD 5.V+5D 4.CTS 3.RTS 2.RXD 1.TXD OPEN W496 W497 W486 W483 W399 W400 20 CN5901 G CN1902 K CN8002 CN5901 W485 W325 W326 W327 W328 W329 DVDCS W330 CN5506 VE+5V W494 W316 W317 OPEN W318 W332 VA+12TX W333 W334 W335 W336 CN5504 C5510 W337 W338 IF ASSY CMKS-P3X W302 VE+5V CN5508 W304 OPEN W305 21.ECHOVOL 20.LEVELIN 19.KEYSTB 18.KEYSCK 17.KEYSDATA W488 W324 W490 R5601 R5606 D5501 C5501 OPEN W366 W361 PRINTED SIDE W365 W362 W363 W390 W388 R5914 W387 20 7 W489 D5503 W315 C5502 D5508 C5709 X5701 W207 W203 CN5509 W205 W206 IC5701 W204 W202 W201 C5803 C5804 VA+12V W221 W222 Q5805 Q5802 DECK FFC W224 R5804 CN5802 W220 W242 W238 W314 L5501 W312 D5505 IN CONTACT 13 1 SIDE 17.RECL 16.PBL 15.GNDA 14.PBR 13.RECR 12.XPBMUTE R5802 W226 W223 3.MS 2.VB+12V 1.GNDB CONTACT SIDE W244 W241 C5955 W265 VUN+5VM VUN+5V W282 W285 SERVICE W274 W295 C5951 W292 CN5502 W309 VD+5V CONTACT SIDE D5504 C5507 D5509 W321 8.MUTE W320 C5508 W323 OUT D5502 IC5507 NJM7805FA PRINTED SIDE W357 W358 W360 W359 W385 W389 JA5903 W397 1 1 7 1 W386 CN5501 CN5902 1 CN5701 CN5903 11.DOLBY ON/OFF 10.RECMUTE 9.PB/XREC 8.XBEATCUT 7.BIAS 6.GNDD 5.VA+12V C5806 4.VA+12V C5805 W243 W239 Q5955 W266 W267 W269 VM+12V W268 VUN+12V W270 Q5952 W291 W293 D5953 W294 D5951 R5954 W308 W306 1.XCDRST 2.SEL1 3.SEL2 4.SCLK 5.SMDATA 6.MSDATA 7.ACK J2 VE+56 GNDU W356 J4 9.GNDD 10.NC 11.VDET 12.GNDD 13.NC 14.NC 15.NC 16.VUN+5V 17.VUN+5V 18.VUN+5VM 19.VUN+5VM 20.GNDD(M) 21.GNDD(M) 22.GNDD 23.GNDD 24.SPDIF 25.GNDD 26.VUN+12V 27.GNDA 28.CDL 29.GNDA 30.CDR W346 1 1 11 11 1 1 UN+56 Q5951 IC5801 17 1 1 CONTACT UPPER SIDE 1 J1 B 15 15 14 11 J3 GNDD 2121 1 17 17 1 7 KN5503 CN5503 CN5506 CN5507 CN5508 CN5501 K C CN8901 K IF ASSY CN1901 G KN5502 3 CN2506 DECK MECHA. 30 J 17 CN5101 GNDD 7 1 1 - KEY4 16 17 17 1 1 1 2121 1 CN5510 1 1 (1 RED,2 BLACK) 12.GNDA + GNDU VA+12V DSPMUTEOUT DSPOUT DSPCLK GNDD GNDM GNDD VU+12V CN5903 1 C CN8751 CN8101 CN5801 1 C CN201 (XNP3060-D) CN5802 GNDA A CN5509 11 11 GNDM CN5504 1 1 10 GNDU 13.SW 14.GNDA 15.C 1.RECR 2.GNDA 3.RECL 5.FR 4.GNDA 6.GNDA 7.FL 8.GNDA 9.RS 10.GNDA 11.LS 10.CSRST 11.A/D MODE 1.GNDD 2.RX1 3.NC 4.NC 5.NC 6.NC 7.GNDD 8.CDPDN 9.CDCS 20.XDSPMUTEIN 21.DSPMUTEOUT 18.CSDI 19.CA18 17.CA19 16.NC VE+56 1 2 XV-EV51 IC5507 B GNDA GNDD 1 54 B F CN5505 CN5701 IC5801 IC5701 Q5805 Q5802 E Q5806 Q5701 Q5955 Q5951 Q5952 D IC5501 C IC5591 IC5508 10.CA15 11.CA16 12.CA17 13.CSREQ 14.CSDO 15.CSCS 1.GNDD 2.GNDD 3.VD+5V 4.VD+5V 5.CDERR 6.ABOOT 7.CDDO 8.FS96 9.CSCLK GNDM CN5510 To FAN To M-EV51 or M-EV21 Power amplfier CN8001 B A CN8003 SIDE A 4.5 IF ASSY 1 2 3 4 5 6 7 8 SIDE B B IF ASSY C 1 7055Q 1955C 3155D 4155D 1 9065C 2695C 2155D 17 0695C 0155D 1 2165R 1165R 1 5 151 0155Q 21 15 I C 55 10 08 08 18 3075R CN5505 2075R 6175C 1175R CN5802 1085Q 10 CN5509 61 4175C Q5802 1 VA+12V 9 Q5701 Q5806 0175R 6075C 4175R CN5701 11 8 17 033 0 4185R 6185R 5CH DVD 1 GNDU 8.MUTE 9.GNDD 10.NC 1.XCDRST 2.SEL1 3.SEL2 4.SCLK 5.SMDATA 6.MSDATA 7.ACK 4155C 1155Q 1 2355C 5055C 11 3155C 3355C 21 1 11 4955R 9955R 6055Q 4055R 3055R 0855R 1055Q CN5501 Y C V 6095C 5255C 2055Q CN5504 2095L VD+5V GNDD 3955C 2CH DVD 7085Q Q5701 5595R D Q5955 13.TXCE 12.TXIDATA 11.TXCLK 10.TXODATA 9.TXR 8.GNDTX 7.TXL CN5502 VUN+12V Q5951 Q5952 VM+12V VUN+5V VUN+5VM 2.VB+12V 1.GNDB 7595C 6.TXMUTE 5.ST/TUNE 4.TUNE 3.V+10 2.RDS 1.NC 3175R 9075R 5075C Q5954 Q5952 Q5951 17.C 15.SW 16.GNDA 13.LS 14.GNDA 21.GNDD(M) 11.VDET 12.GNDD 13.NC 14.NC 15.NC 16.VUN+5V 17.VUN+5V 18.VUN+5VM 19.VUN+5VM 20.GNDD(M) 6595R 1.SWFMIX 13 1075CI GNDA 0175C 11 1175C 6611 5.VA+12V 4.VA+12V 3.MS 9.PB/XREC 8.XBEATCUT 6.GNDD 7.BIAS 10.RECMUTE 12.XPBMUTE 11.DOLBY ON/OFF 17.RECL 16.PBL 15.GNDA 14.PBR 13.RECR RECR RECL CN5801 1.GNDU 2.VE+5V 3.LCDCLK 4.LCDDATA 5.KEY3 6.KEY2 7.KEY1 8.REMOCON 9.VA+12V 10.GNDD 11.GNDD 2185R 8 8 1 9 8 1085CI 2175C 5175C 8075C 9 Q5805 16 1 CN5801 11 8085Q 4075R CN5701 6085R 1085R Q5511 Q5510 Q5953 3.RECR 4.GNDA 2.DTSDMIX 3085Q 10 11.RS 12.GNDA 9.FL 10.GNDA 7.FR 8.GNDA 5.RECL 6.GNDA 4085Q IC5501 VA+12V IC5507 00 1 VM+12V 3075C 7075R 6075R 8075R 3185R Q5501 1 9085R 12.ASSELA 1085D 3255R 5185R 3085R 1085C 1185R 11.CDL 22.GNDD 23.GNDD 24.SPDIF 25.GNDD 26.VUN+12V 27.GNDA 28.CDL 29.GNDA 1365R 10.GNDA 30.CDR 1855R 9.CDR 2255R 5075R TXL 1 8.GNDA 9155R 6355R 4355R TXR E GNDM CN5903 1 2695R 7.RECR GNDU 4065R 5355R 3355R 2355R 0355R Q5502 CDL 1.GNDM 2.SOL 3.NC 5.HALF 6.MODE 7.GNDM 9.RECF Q5806 5085R 3065R 4255R 0255R C IC5507 Q5506 CDR 1355R 9255R 2085C 17 6.PBR 1.TXD 2.RXD 3.RTS 4.CTS 5.GND 6.S-C 7.GND 8.V 9.GND 10.S-Y 11.GND 12.NC 13.GND 14.NC 15.GND 16.NC IF ASSY 12.VU+5V 11.PROTECT 16 10.EVOL-CE GNDD CN5901 7.SPCON 6.GNDA 5.FLP 4.FLN 3.FRP 2.FRN 1.KEY4 1 5.GNDA 3.RECL 4.PBL 2.AUXMUTE 1.ATTCONT 1 CN5502 9.EVOL-DATA 8.EVOL-CLK GNDM 14.TXR 13.VA+12TX 12. VA+12V 1 CN5501 VU+12V GNDD 1075R 8255R 7255R VE+5V 4.PULSE 2595D 0065R 5455R 2455R 1455R 8355R 6255R 5255R 1255R 6155R 8155R 8.VD+5V 10.MOTOR 11.RECR B GNDD GNDA 9085C VE+56 11.FRP 10.FRN 9.FLP 8.FLN GNDA 0165R 2855R 5155C 3155R 4155R 7155R 8595R 30 CN5903 3.VA-12V 4.GNDD 2165C 9065R 05 0 5 13 13 6855R 3855R 5855R 4855R 0185R 4455R 3455R 0455R 9355R 7355R 9155C 2595C 19.KEYSTB 20.LEVELIN 9455R 18.KEYSCK 6455R Q5529 Q5508 Q5505 4165R 3165C CMKS-P3X 1 8455R 3955R 7085C 17.KEYSDATA 0255C Q5507 3165R 9555R 0955R 8555R 7555R 5555R 4555R 3555R 7455R 2555R 2955R 1555R 0555R 8855R 00 Q5955 1265R 8155C 6155C 7155C 0365R 4955C 9265R 21.ECHOVOL 1655R 0655R IC5508 Q5512 Q5509 16.VOCALC 15.VOCALB 1.RECR 2.GNDA 3.RECL 5.FR 4.GNDA 6.GNDA 7.FL 8.GNDA 9.RS 10.GNDA 11.LS 12.GNDA IC5591 CN5501 14.VOCALA 8055R 6055C 7855R 2155C 9855R 1595R 13.ASSELB CN5504 13.SW 14.GNDA 15.C CN5508 2255C 8265R 3595Q 4595C GNDD VA+12TX 10.CSRST 11.A/D MODE 6555R 1 7 7. 6.GNDA 5.VU+12V IN 9.CDCS B 15.GNDA 17.MUTE 16.TXL CN5503 7.GNDD 8.CDPDN CN5506 1055R 3055C 4595Q 2595R IC5508 11 6611 1.GNDD 2.RX1 3-6.NC 5655R 4655R 3655R 2655R 7955R 8955R 2155Q 5955C 8055Q 6655R 6955R 5165R 5695R 7065R 1955R 18 0755R 1755R 2755R 4755R 7755R 9755R 2055R 0155R 2155R 5755R 6755R 5065R 8755R 6055R 7055R 9055R 1155R GNDU OUT IN GNDU 3755R 3695R 1695C 6695R 2955C 9655R 8655R 7655R 4595D 9055Q 2065R 5055Q 5055R 1155C OUT XWZ3617 XWZ3624 XWZ3627 CN5901 7255C 1955CI 4695R 9255C 8065R 0185C 8 6955C 1065D 2065C 3065C 3065D 5065D 5065C 9 9065D 2065D 1065C 4065C 4065D 6065D 6065C 8065C C5616 8 E 0165C 1165C 21.DSPMUTEOUT CN5507 5095R 1165D 20.UN+56 19.VA-12V 18.AC 17.GNDD 16.GNDD 15.GNDM 14.VU+12V 13.VU+5V 9055C B 0165D 4095R 1255C 1095R 1095C 3095R 3095L 7065D 8065D 7095R 3095C 7065C 10.CA15 11.CA16 C5615 GNDM 7 8095R 6095R 12.CA17 13.CSREQ 14.CSDO 15.CSCS 16.NC 17.CA19 18.CSDI 19.CA18 20.XDSPMUTEIN 2.GNDD 1.VE+56 3695C C5614 20 CN5902 2195R CN5503 1.GNDD 2.GNDD 3.VD+5V 4.VD+5V 5.CDERR 6.ABOOT 7.CDDO 8.FS96 9.CSCLK GNDA 9095R 0195R CN5507 7095C 5095C CN5505 CN5501 1195R 8085C A Q5804 Q5801 Q5803 E Q5802 Q5805 Q5807 IC5701 Q5808 Q5801 CN5802 CN5509 (XNP3060-D) F B XV-EV51 5 6 7 55 8 1 2 56 3 4 XV-EV51 C M J5401 F (XNP3060-C) CN8301 C8601 C8701 C8702 IC8601 C8614 IC8701 FC ICT IC8601 IC8701 C8613 C8602 W120 IC8703 W177 W117 W487 IC8602 W161 R8724 IC8603 IC8702 W121 W116 W159 B C8714 W160 W162 W492 W178 W119 CN8301 C8752 W179 W163 W140 1 1 IC8753 W124 W125 R8626 R8625 W141 W142 W164 W143 W144 C8829 W145 C8762 IC8801 C8831 B 17 17 W107 IC8301 C8305 W128 W182 W183 W185 C8310 W149 C8118 C8119 IC8201 C8120 1 1 W130 C8117 W108 V+12V CN8101 B C8826 C8822 IC8111 C8213 C8221 21 21 IC8802 W132 D8901 17 GNDA 18 PBL 19 RECL 20 AUXMUTE C8908 Q8201 IC8101 1 ECHOLVOL 11 CDL 2 LEVELIN 12 GNDA 3 KEYSTB 4 KEYSCK 13 CDR 5 KEYSDATA 14 GNDA 6 VOCALC 15 RECR 7 VOCALB 16 PBR 8 VOCALA 9 ASSELB 10 ASSELA C8907 D8201 C8222 R8216 C8905 W170 W152 21 ATTNCONT W187 L8201 1 1 C8509 C8510 C8902 IC8901 W172 W134 W135 W153 W158 W156 W173 W154 W157 W133 W137 W136 W138 W171 C8113 W155 PRINTED SIDE IC8803 R8814 D8902 R8904 R8901 NJM7812 CN8901 W180 C8823 C8201 C8309 AF ASSY CN8101 C8761 IC8752 CN8751 V-12V W181 W167 W102 W127 C8789 C8833 C8308 W168 C8307 W169 V-12V CN8751 V+12V W166 W146 W165 W126 W103 W104 C8312 W147 W101 W105 W106 W148 C8834 W129 W186 CN5505 W150 W131 W151 W109 W110 W111 W112 W113 W114 1 GNDTX 2 TXL 3 GNDTX 4 TXR 5 VA+12TX 6 VA+12V 7 FRP 8 FRN 9 FLP 10 FLN 11 GNDA 12 GNDA 13 VU+12V 14 GNDD 15 VA-12V 16 GNDD 17 VE+56 W184 CN5504 CONTACT SIDE CMKS-P3X W123 W122 IC8751 W139 C8751 1 C 2 GNDA 3 SW 4 GNDA 5 LS 6 GNDA 7 RS 8 GNDA 9 FL 10 GNDA 11 FR 12 GNDA 13 ANAL 14 GNDA 15 ANAR 16 DTSMIX 17 SWFMIX W176 C8713 C8625 For Binder C8622 C8620 C8626 4 PRODUCTION CODE 1 4 CONTACT SIDE IC8603 1 IC8801 IC8752 Q8201 CN5503 CONTACT SIDE IC8703 IC8702 E IC8602 IC8751 IC8753 D IC8301 IC8201 IC8111 IC8101 C IC8802 IC8803 IC8901 W174 C8906 W189 W175 CN8701 SRP CN CP SWN SWP SLN SLP SRN 2 9 B CN8901 17 17 W190 C8111 B JA8401 10 1 3 5 7 CN8701 C A AF ASSY TO. STEREO POWER AMPLIFIER (M-EV51 CN-3002) SIDE A 4.6 AF ASSY 1 2 3 4 5 6 7 8 SIDE B C A AF ASSY CN8701 C8514 7158R R8516 R8515 C8402 R8402 0878C 2878C 1878C 3878C C8785 8158C 3158C 2378C 4378C 1378C 3378C R8411 C8407 C8401 C8516 C8517 C8404 8 D8710 4878C 3048Q D8759 R8312 C8830 8 3088CI 3098C 3778C 8 IC8752 6138C 1 IC8801 R8774 C8619 4 C8519 3678C R8719 C8719 1 C8725 1 C 2 GNDA 3 SW 4 GNDA 5 LS 6 GNDA 7 RS 8 GNDA 9 FL 10 GNDA 11 FR 12 GNDA 13 ANAL 14 GNDA 15 ANAR 16 DTSMIX 17 SWFMIX R8722 C8722 C8726 4 R8718 1 8 C8721 R8717 8578Q 5 4 5 4 3578Q IC8601 1 5 4 R8702 C8704 R8748 IC8701 R8745 C8708 R8746 C8706 R8742 R8744 R8708 LS FL R8605 C8609 R8603 R8607 C8605 C8607 R8601 C8603 RS 9578Q C8710 R8704 R8720 C8720 R8606 C8610 C8608 R8608 C8606 R8604 C8604 R8602 IC8602 IC8702 IC8603 IC8703 E Q8758 Q8754 8 C8715 8 1 4578Q 6178C 6168C R8743 IC8703 C8615 1478R D8601 FR XWZ3628 XWZ3625 XWZ3618 C8623 R8723 R8721 5 5 3068CI 1 41 2068CI C8724 C8723 2078CI 1 8 7 8 1 8 1 R8752 CN8301 C8621 IC8751 R8779 R8753 R8757 R8781 C8755 C 4268C IC8751 SW R8613 C8760 C8758 R8754 C8756 C8754 IC8753 8 C8618 R8614 R8612 5 R8623 C8628 R8624 R8622 7578C 7268C 1168R 1268R 7168C LFE 4678C C8770 IC8753 R8778 R8758 4 7288C C8768 1.ECHOVOL 2.VA+12V 3.MIC 4.GNDA LFE DSPINL ECHVOL 4 1.ECHOLVOL 2.LEVELIN 3.KEYSTB 4.KEYSCK 5.KEYSDATA 6.VOCALC 7.VOCALB 8.VOCALA 9.ASSELB 10 ASSELA 11 CDL 12 GNDA 1 KEYSTB R8770 GNDA C8737 R8728 R8726 R8727 R8777 C8759 R8751 C8753 R8759 R8772 KEYSCK C8828 C8772 C8774 4 5 6188R 8 R8306 R8307 KEYSDATA D 7678C C8824 R8768 Q4002 Q301 R8771 4 C8313 Q3009 C8771 C8788 8 LPFOL IC8301 Q3010 5 R8304 C8315 R8305 CMKS-P3X 5 DSPINL 2068D 5128R 5 1 GNDA R8773 R8769 R8767 C8769 1 1 6611 17 R8211 R8210 C8219 R8207 C8218 R8205 C8217 R8206 C8216 C8215 C8214 C8202 LPFOR 1088CI 4 11 5 4 9088R 8 1 2088CI 4 1018CI 7018C 4038C 13CDR 14GNDA 15RECR 16PBR 17GNDA 18PBL 19RECL 20 2038R IC8201 LEVELIN GNDA C8207 1 1 82 82 8 9 R8203 C8204 R8202 R8201 R8729 IC8201 C8208 C8311 R8308 C8786 IC8111 C8210 C8209 C8306 IC8301 R8802 R8801 R8803 C8803 CN8751 R8212 R8204 C8205 DSPINR C R8213 GNDA C8302 IC8101 Q8201 C8211 R8105 C8203 FADEROL R8303 IC8802 R8214 41 41 11 1 C8303 51 51 44 8 CN8101 5158C 1058Q 1 1018R 21.ATTNCONT 20.AUXMUTE 11 6611 5 5 R8111 Q8101 Q8102 C8212 C8223 R8217 C8206 FADEROR C8108 R8106 Q8201 CDR C8806 FADEROL AF ASSY 8 9 21 R8108 R8112 VA-12V C8220 R8209 R8208 IC8111 IC8803 OUT PBR R8104 C8106 R8103 C8105 R8107 IC8901 R8811 C8810 C8812 C8103 C8101 GNDA D8757 C8778 C8779 C8775 C8776 C8809 R8812 R8810 R8808 C8808 B D8762 D8760 IC8901 1 CN8901 R8102 D8756 D8758 Q8501 Q8401 IN AUXINL PBL CDL C8811 R8813 C8807 GNDA CN8751 D8711 D8709 C8729 VU+12V AUXOUTL AUXOUTR C8728 D8708 C8813 RECR C8301 R8301 C8730 D8706 C8736 R8513 R8511 R8518 R8519 R8815 Q8101 Q8403 Q8503 Q8502 Q8402 D8705 D8707 VA-12V RECL CN8101 CN8701 VA+12V Q8102 PBR ATTNCONT VA-12V AUXMUTE VA+12V TXL AUXINR TXR 12 GNDA 11 GNDA 10 FLN 9 FLP 8 FRN 7 FRP 6 VA+12V 5 VA+12TX 4 TXR 3 GNDTX 2 TXL 1 GNDTX TXR GNDA GNDTX 13 VU+12V AUXINL 15 VA-12V 14 GNDD GNDA C8403 R8405 C8405 R8407 R8409 2088D R8403 GNDA(AUXIN) 17 CN8901 R8401 D8755 1 4098C 7278C Q8401 R8410 FOR SERVICE D8712 L8701 2058Q Q8402 1048D GNDD VE+56 4158R R8408 17 VE+56 16 GNDD D8761 2158R C8406 3058Q R8404 R8406 C8735 Q8759 Q8753 C8707 R8707 C8705 C8703 C8709 R8703 R8701 R8747 IC8701 IC8601 (XNP3060-C) F C XV-EV51 5 6 7 57 8 3 RCH W247 C2261 C2262 1 CN5801 IC2202 17 CN2506 CONTACT SIDE ICT FC C2255 F2201 PRINTED SIDE D2256 C2251 W246 IC2201 IC2201 W263 W257 W255 W235 VA12 W236 GNDA C2218 VA12 GNDA W237 VREF W258 W259 Lch VR2301 VR2302 Lch W240 Rch GNDA W241 W242 C2312 VREF VR2402 VR2401 IC2301 C2418 C2417 IC2301 C2310 C2404 C2403 C2309 W260 VREF W261 VA12 Adj. C2311 Rch W239 R2321 PB LEVEL Adj. BIG C2217 REC LEVEL C B 1 IC2202 C2210 LCH CN2506 W228 3 W249 W227 CN2507 XNP3061-A DI P W251 VREF W223 W253 W252 GNDA C2209 C2203 VREF GNDA W231 L C2208 1 C2201 3 W219 W234 W233 CMKS-P3X C2202 C2307 L2404 C2425 IC2401 IC2401 Q2805 Production Code C2308 C2409 L2403 C2410 W243 C2407 C2408 DECK ASSY Q2805 W248 GNDA C2406 W244 C2207 C2215 C2422 L2402 L2401 C2421 CN2301 2 Rch VR2801 VR2802 Q2802 Q2801 1 6 C2810 Lch Q2806 C2803 L2801 SIDE 3 4 W262 Q2806 C2809 A BIG C2801 PRINTED 1 2 Adj. DECK MECHA Q2301 Q2302 Q2803 C2808 1 OPEN BIAS CN2302 D2301 CN2301 D2306 D2305 C2420 C2419 C2405 DECK MECHA D2303 R C2254 GNDA W218 VA12 W220 VA12 W238 C2204 C2216 W232 VA12 W250 MS 17.RECL PBL 15.GNDA PBR D2201 W230 RECR C2314 W224 C2205 C2206 W221 W254 XPBMUTE DOL ON\OFF 10.RECMUTE PB/XREC XBEATCUT BIAS DGND 5.VA+12 VA+12 MS VB+12 1.GNDB Q2802 DECK TP C2807 W256 W222 4 1 F2202 PRINTED SIDE W225 VR2302 W229 Q2301 Q2302 Q2803 4 1 3 R2806 2 D2302 1 D2304 3 4 Q2801 5 R2803 2 4 VR2301 17 1 2 L2802 5 VR2801 E VR2402 OPEN 1 58 1 VR2401 VR2802 D 2 R2805 B CN2302 C2804 E C2802 A C2805 C2806 1 3 4 4.7 DECK ASSY SIDE A DECK ASSY (XNP3061-A) F E XV-EV51 4 5 6 7 8 SIDE B 5182R BIG L2801 1232C 5542Q 3142R 0 0 1 1142R 1342C 1 C B A 1042Q 1542Q 1142C 3232C 1132R 1532Q 2542R 1542R 0242R 3122R TP1 CMKS-P3X 3532Q Adj. VA12 TP2 GNDA VREF BIG R9008 VR2302 2532Q VR2401 1042R C2412 L R VR2301 REC LEVEL VA12 3042R L R VR2402 R2319 VREF R2404 R2320 C C2451 2542Q GNDA VA12 R2352 R2421 1042D VREF PB LEVEL Adj. C2452 R2453 D R2351 VA12 0642Q 1022CI 4542Q 8 8 9 9 4022R 6522R 2522D 1522Q 8022R 7022R 6009R 3722R R2251 E R2203 R2259 L1 1622R 2022R 4612R 4622R R Q2262 2822R 2622R 17 VREF 3 3622R CN2507 Q2263 Q2262 Q2201 D2253 D2254 5022R 1022R F2201 1 F2202 4 R2260 R2275 3612R R2253 R2265 6622R 1722R 0722R R2206 R2257 8 7622R R2252 D2255 R2268 Q2261 R2274 3622Q 1322C 4522Q 1922R R2254 2022CI 3822R C2211 R2255 5 CN2506 IC2202 GNDA R2281 C2212 Q2253 2522Q 5522Q 1 C2253 C2256 R2269 C2257 GNDA VREF C2252 R2272 1 1 6722R 7722R MS GNDA 61 61 D2201 D2256 Q2251 Q2253 Q2252 Q2254 Q2252 0122R C2230 GNDA 8.XBEATCUT 9.PB/XREC 10.RMUTE 11.DOL ON 12.XPBMUTE 13.RECR 14.PBR 15.GNDA 16.PBL 17.RECL CN2506 GNDA 3542Q Q2454 IC2201 XWX3066 XWX3067 Q2453 Q2460 1122R 1.GNDB 2.VB+12 3.MS 4.VA+12 5.VA+12 6.DGND 7.BIAS VA12 VR2402 VR2401 VR2301 VR2302 Q2452 Q2351 Q2353 Q2352 Q2451 8032D 8942R 2242R 5032Q 2042Q 2132R Q2306 1 1 1032CI 8 R2310 2042R 6032R R2305 R2307 R2309 R2308 L2403 R2415 9942R 4 5 IC2201 Q2306 Q2305 Q2302 Q2401 XNP3061-A C2324 9142R C2304 C2322 R2409 R2417 R2410 9 8 7 6 5 4 3 2 1 0 5 2042C 4 R2418 R2416 C2315 L2404 9082R C2303 R2304 3 2 1 0 1042CI 3032Q 4142R 1 8 R2431 C2432 R2303 R2810 CN2302 3182R 3242R R2455 C2401 R2412 7032D B 5242R 4242C 3242C 6242R 1032R 2032C 4032Q 1182R 6542Q E CN2301 2032R 9932R R2432 Q2301 D2306 Q2805 1 R2456 L2401 L2402 D2305 VREF C2301 Q2804 Adj. L R CN2301 D2301 1 Q2302 R2899 R2424 R9005 BIAS D2303 CN2302 L R R2814 VREF D2304 6182R VR2801 Q2802 D2302 IC2401 Q2803 Q2804 Q2805 Q2302 Q2304 Q2301 Q2303 Q2456 Q2455 Q2803 8082R 7082R Q2806 L2802 VR2801 VR2801 Q2802 Q2801 Q2801 VR2802 Q2806 R2898 R2802 R2801 A (XNP3061-A) F E XV-EV51 5 6 7 59 8 1 2 3 4 4.8 DISP1, DISP2, DISP3 and LED ASSYS SIDE A B CN5509 J 1 CN5101 5101 W462 W463 CN5101 CONTACT ON UPPER SIDE 1 11 1 DISP1 ASSY 11 A 5.LCDDATA 4.LCDCLK 3.VCC C5103 2.GNDU 1.GNDU 2.VE+5 3.LCDCLK 4.LCDDATA 5.KEY 3 6.KEY 2 7.KEY 1 8.REMIN 9.VA+12 10.GNDD 11.GNDC 1.VLCD 5 L5101 W465 W471 W464 5 CMKS-P3X 1 1 B C5108 V5101 W472 R5106 D5101 W466 S5102 2CH VIRTUAL SURROUND 5CH KARAOKE S5105 S5103 D5103 ST MEMORY W467 S5104 ENTER W473 5.VA+12V 4.KEY 3 3.KEY 2 2.GNDU 1.GNDD W474 C S5106 MODE D5102 DISPLAY1 ASSY S5101 SOUND 5 1CN5102 1 5 OPEN D5105 W468 D5108 D5107 (XNP3060-C) I 5 W475 D5201 R5211 D5204 D5108 MANUAL SOLDER D5107 MANUAL SOLDER 5 3.GNDU S5210 OPEN/CLOSE W458 D5203 MANUAL SOLDER STOP 1.GNDU 2.KEY 5 LED ASSY TAPE TUNNING + S5207 S5205 S5201 PLAY/PAUSE S5211 S5208 >>/>> | |<>/>>|tunning + 4125R 3125R LINE S5209 S5204 DVD/CD 1 STOP 1025R S5205 VOL S5202 3025R 2025R 7025R 1025C R5206 2125R 1025Q Q5201 VOL + S5206 J5102 J5202 TAPE 5.VA+12V 4.KEY3 3.KEY2 2.GNDU 1.GNDD S5208 (XNP3060-C) 5 (XNP3060-C) 1035R 3035R S5304 1.GNDU 2.KEY 5 3.GNDU S5301 REC/STOP H DISP3ASSY J5202 S5302 ASSES 1 DOBLY NR(DEMO) REVERSE MODE E 2035R DISPLAY3 ASSY XWZ3621 S5303 3 I A J5202 CMKS-P3X (XNP3060-C) F H I J L XV-EV51 5 6 7 61 8 1 2 3 4 4.9 MIC ASSY A SIDE A SIDE A M MIC ASSY C CN8301 VR5401 C5431 C5416 W477 C5420 MIC ASSY 5 W460 C5413 1 W469 W452 C5422 JA5401 W457 3 W456 IC5401 C5426 CMKS-P3X KN5401 D5401 R5413 C5409 1.ECHOVOL 2.VA+12V 3.MIC 4.GNDA 4 C5401 Q5402 R5411 L5401 W470 W454 W459 C5433 IC5402 C5432 4 4 R5401 2 1 W476 1 J5401 C5421 3 C5410 J5401 W453 1 B JA5402 1 W461 4 5 3 C (XNP3060-C) Q5402 IC5401 IC5402 SIDE B D 3 8145R 4145C 4145R 5145C 1 1045CI 3 4 CMKS-P3X 4 5 4 1 3 2 XWZ3623 XWZ3626 4.GNDA 7145R 5145R 7145C J5401 6345C 9145C 8145C 8 2145C 5245C 2045CI 5 9145R 7045C 1145C 1 E 1 4 6145R 8245C 8045C 8045R 9045R 4345C 2145R 0245R 3245C 1245R 4245C 8 2245R 3245R 4245R 11 7045R 2345R 1 1.ECHOVOL 2.VA+12V 3.MIC 5245R 6245R 7245C 2045R 3345R 0345R 9 1345R 4 J5401 5 9245R 0345C 9245C 6045R 5045R 4045R 6045C 3045R 4045C 5045C 3045C 2045C 1045Q 4345R 16 16 MIC ASSY (XNP3060-C) Q5401 IC5401 IC5402 F M M XV-EV51 62 1 2 3 4 5 6 7 8 4.10 DSP ASSY(XV-EV51 Only) SIDE A SIDE A A K DSP ASSY(XV-EV51_Only) B CN5507 B CN5506 B CN5508 CN8001 CN8002 CN8003 B C IC8201 Q8301 Q8201 IC8204 IC8501 IC8601 Q8351 IC8101 IC8102 IC8301 IC8401 IC8021 (ANP7442-B) SIDE B D E CN8001 CN8002 IC8202 CN8003 Q8353 (ANP7442-B) IC8203 F K K XV-EV51 5 6 7 63 8 1 2 3 4 5. PCB PARTS LIST NOTES: A B Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List. The mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. When ordering resistors, first convert resistance values into code form as shown in the following examples. Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%, and K=10%). 560 Ω 56 x 10 1 RD1/4PU 5 6 1 J 561 47k Ω RD1/4PU 4 7 3 J 47 x 10 3 473 0.5 Ω RN2H R 5 0 K R50 1Ω RS1P 1 R 0 K 1R0 Ex.2 When there are 3 effective digits (such as in high precision metal film resistors). 5.62k Ω 562 x 10 1 5621 RN1/4PC 5 6 2 1 F Mark No. Description Part No. Mark No. AWX8059 IC8101 > IC8021 > IC8011 IC8201 LIST OF ASSEMBLIES XV-EV51/ZLXJ/NC 1..DSP ASSY NSP C NSP NSP NSP D XWM3206 XWZ3617 XWZ3618 XWZ3619 XWZ3620 XWZ3621 XWZ3622 XWZ3626 1..DECK ASSY XWZ3067 1..DVD ASSY 2..DVD IF ASSY 2..DVDM ASSY AXA7110 AWM7677 AWM7684 1..LOADING MECHANISM ASSY 2..LOAB ASSY VWT1203 VWG2346 1..FM/AM TUNER MODULE AXQ7228 1..MEDIA ASSY 2..IF ASSY 2..AF ASSY 2..DISP 1 ASSY 2..DISP 2 ASSY 2..DISP 3 ASSY 2..LED ASSY 2..MIC ASSY XWM3208 XWZ3627 XWZ3628 XWZ3619 XWZ3620 XWZ3621 XWZ3622 XWZ3623 1..DECK ASSY XWZ3066 NSP 1..DVD ASSY 2..DVD IF ASSY 2..DVDM ASSY AXA7110 AWM7677 AWM7684 NSP NSP 1..LOADING MECHANISM ASSY 2..LOAB ASSY VWT1203 VWG2346 1..FM/AM TUNER MODULE AXQ7228 Mark No. F Description Part No. CS493292 NJM2391DL1-25 NJM2391DL1-33 PD8104A IC8501 IC8202, IC8203 IC8601 IC8102 Q8351 TC74LVX244FT TC74VHC574F TC74VHCT08AFT TC7WU04FU RN2903 Q8301 Q8353 D8301-D8304 D8353 D8351, D8352 UMD2N UN5212 1SS355 DAN202K DAP202K COILS AND FILTERS L8011, L8102, L8201 Chip Inductor L8301, L8302, L8501, L8601 L8305 Chip Beads QTL1013 QTL1013 VTL1089 CAPACITORS XV-EV21/ZLXJ/NC NSP E 1..MEDIA ASSY 2..IF ASSY 2..AF ASSY 2..DISP 1 ASSY 2..DISP 2 ASSY 2..DISP 3 ASSY 2..LED ASSY 2..MIC ASSY Description C8305, C8306 C8117 C8107, C8109, C8113, C8120, C8122 C8205, C8206, C8209, C8210, C8308 C8318, C8503, C8603 CCSRCH120J50 CCSRCH271J50 CCSRCH471J50 CCSRCH471J50 CCSRCH471J50 C8115, C8116 C8302, C8501, C8601 C8001, C8014, C8024, C8103, C8307 C8316, C8323 C8320 CCSRCH6R0D50 CEAL100M16 CEAL101M10 CEAL101M10 CEAL220M6R3 C8123 C8011, C8021 C8906 C8102, C8106, C8108, C8114 C8118, C8119, C8121, C8124, C8202 CEAL2R2M50 CEAL4R7M16 CKSRYB102K50 CKSRYB103K50 CKSRYB103K50 C8204, C8207, C8208, C8211, C8309 C8317, C8324, C8502, C8602, C8920 C8319, C8329-C8332, C8903, C8907 C8911 C8301, C8304, C8321 CKSRYB103K50 CKSRYB103K50 CKSRYB104K25 CKSRYB104K25 CKSRYB473K25 RESISTORS Part No. R8313, R8501 R8312 Other Resistors K DSP Assy (EV51 Only) RAB4C101J RS1/16S1802F RS1/16S###J OTHERS SEMICONDUCTORS IC8301 CN8002 11P SOCKET CN8003 15P SOCKET AK4586VQ AKP7069 AKP7071 XV-EV51 64 1 2 3 4 5 Mark No. 6 Description Part No. CN8001 21P SOCKET X8301 CRYSTAL RES.(12.28MHz) 8903 SCREW PLATE AKP7074 ASS7046 VNE1948 KN8901, KN8902 EARTH METAL FIT. X8101 CRYSTAL RES.(27MHz) VNF1084 VSS1172 7 Mark No. Description X201 Crystal RES.(7.2MHz) Part No. ASS1093 B IF ASSY (XWZ3617) A SEMICONDUCTORS IC5591, IC5801 A FM/AM TUNER MODULE IC5501 Q5951, Q5801, Q5952 BU4094BCF NJM7805FA NJM78M56FA PDC093A 2SB1237X Q5501, Q5953, Q5954 Q5701 Q5806 Q5803 Q5505, Q5509 2SC2412K 2SD1858X 2SD2012 DTA124EK DTA143EK Q5506, Q5507, Q5508 Q5502, Q5807, Q5808, Q5802, Q5805 D5501, D5502, D5506, D5508, D5509 D5703, D5951, D5953, D5801, D5952 D5954 DTC124EK DTC143EK 1SS133 1SS133 1SS355 D5511 D5701 D5507 D5609, D5512, D5513, D5514 MTZJ11B MTZJ11C MTZJ6.8B UDZS6.8B > IC5507 > IC5508 SEMICONDUCTORS IC201 IC202 Q201, Q204, Q205 Q202 Q203 BA1451F LC72131MD 2SC2412K DTA124ES DTC124EK D201 D202 1SS133 MTZJ5.1C COILS AND FILTERS L201 (FM Detector coil) F202 (Ceramic filter) F201 (Ceramic filter) F203 (AM Ceramic filter) 8 ATE7003 ATF-107 ATF-119 ATF1155 CAPACITORS B C206 C212, C213, C226, C233-C235 C240 C231, C232 C223 CCSRCH100D50 CCSRCH101J50 CCSRCH101J50 CCSRCH150J50 CEAT100M50 C229 C224 C227 C241 C243 CEAT101M10 CEAT1R0M50 CEAT220M25 CEAT2R2M50 CEAT330M16 C5502 (0.047F) C5962, C5963, C5901, C5903, C5906 C5958, C5959 C5531 ACH1246 CCSRCH101J50 CCSRCH331J50 CEAL100M16 CEAL100M50 C228 C237 C211 C210 C204, C238, C602 CEAT3R3M50 CEAT470M10 CEJA1R0M50 CEJA470M16 CKSRYB102K50 C5530 C5510, C5702, C5717, C5718, C5803 C5804, C5953, C5955, C5956 C5526 C5507, C5805 CEAL1R0M50 CEAT100M50 CEAT100M50 CEAT101M16 CEAT1R0M50 C101, C102, C208, C220, C239 C242, C601 C216, C217 C225 C201, C205, C209, C214, C230 CKSRYB103K50 CKSRYB103K50 CKSRYB123K50 CKSRYB153K50 CKSRYB223K50 C5951 C5501, C5504, C5806 C5528 C5902, C5904 C5506, C5612, CEAT220M50 CEAT470M16 CEAT470M50 CEAT471M6R3 C5613CKSRYB102K50 C236, C603 C221 C202, C222 C215 CKSRYB223K50 CKSRYB224K10 CKSRYB473K16 CKSRYB681K50 C5516, C5517, C5518, C5521, C5529 C5593, C5594, C5601, C5603, C5605 C5607, C5609, C5610, C5703, C5808 C5809, C5810, C5952, C5954, C5957 C5503, C5505, C5509, C5512, C5515 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB104K16 R211 R221 R233 R243 R103 RD1/4PU221J RD1/4PU222J RD1/4PU391J RS1/10S0R0J RS1/10S331J C5527, C5532, C5591, C5616, C5802 C5960 C5592, C5801 C5961 C5807 CKSRYB104K16 CKSRYB104K16 CKSRYB221K50 CKSRYB224K10 CKSRYB473K25 R104 Other Resistors RS1/10S391J RS1/16S###J C5614 CKSRYF105Z10 C COILS AND FILTERS L5501 LAU220J CAPACITORS D E RESISTORS RESISTORS OTHERS CN201 13P Connector BN201 4P Terminal Shield Case T Shield Case B R5957 R5953 R5802, R5804, R5807 R5954 R5601, R5606 52044-1345 AKA7003 ANK7072 ANK7073 RD1/2PM121J RD1/2PM331J RD1/4PU102J RD1/4PU152J RD1/4PU473J XV-EV51 5 6 7 F 65 8 1 Mark No. 2 Description Other Resistors 3 Part No. Mark No. RS1/16S###J A OTHERS CN5502 7P Connector CN5509, CN5802 11P Connector CN5701 13P Connector CN5506 11P Plug CN5508 15P Plug 52045-0745 52045-1145 52045-1345 AKP7058 AKP7060 CN5503, CN5505, CN5801 17P Plug CN5504, CN5507 21P Plug X5501 Ceramic RES. (10MHz) CN5510 2P Plug CN5901 16P Connector AKP7061 AKP7063 ASS7034 KM200SA2 VKN1192 CN5903 30P Connector CN5902 7P Connector KN5501, KN5502 Earth metal FIT. KN5503 Earth metal FIT. JA5903 2P Pinjack VKN1206 VKN1211 VNF1084 VNF1084 XKB3039 CN5501 20P Socket XKP3051 4 Description Part No. C5501, C5504, C5526, C5806 C5528 C5902, C5904 C5506, C5612, C5613 C5516-C5518, C5521, C5529 CEAT470M16 CEAT470M50 CEAT471M6R3 CKSRYB102K50 CKSRYB103K50 C5593, C5594, C5601, C5603, C5605 C5607, C5609, C5610, C5703 C5808-C5810, C5952, C5954, C5957 C5503, C5505, C5509, C5512, C5515 C5527, C5532, C5616, C5802, C5960 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB104K16 CKSRYB104K16 C5801 C5961 C5807 CKSRYB221K50 CKSRYB224K10 CKSRYB473K25 B RESISTORS R5957 R5953 R5802, R5804, R5807 R5954 R5601, R5606 OTHERS B IF ASSY(XWZ3627) SEMICONDUCTORS C IC5801 IC5501 Q5951, Q5955 BU4094BCF NJM7805FA NJM78M56FA PDC097A 2SA1282 Q5801, Q5804 Q59522 Q5501, Q5701 Q5806 Q5510, Q5511 2SB1132 SB1237X 2SD1858X 2SD2012 2SD2114K Q5512, Q5803 Q5505, Q5509 Q5506-Q5508 Q5502, Q5805 D5501, D5502, D5504, D5506 DTA124EK DTA143EK DTC124EK DTC143ES 1SS133 D5508, D5509, D5703, D5951, D5953 D5510, D5801, D5952, D5954 D5511 D5701 D5507 1SS133 1SS355 MTZJ11B MTZJ11C MTZJ6.8B D5609, D5610 D5512-D5514 UDZS15B UDZS6.8B > IC5507 > IC5508 D 52045-0745 52045-1145 52045-1345 AKP7061 AKP7063 X5501 Ceramic RES. (10MHz) CN5510 2P Plug CN5901 16P Connector CN5903 30P Connector CN5902 7P Connector ASS7034 KM200SA2 VKN1192 VKN1206 VKN1211 KN5501, KN5502 Earth metal FIT. L5902, L5903 JA5903 2P Pinjack CN5501 20P Socket VNF1084 VTL1084 XKB3039 XKP3051 SEMICONDUCTORS COILSANDFILTERS IC8111, IC8801 IC8301 IC8101 IC8602 IC8201 AN4558NS BA3838F BU4052BCF BU4066BCF M65847AFP IC8601, IC8603, IC8701, IC8702, IC8751, IC8752, IC8753, IC8802, IC8901 Q8401, Q8402 Q8201 IC8703NJM4558MD IC8803NJM4558MD NJM7812FA 2SC2412K 2SD1858X Q8501, Q8502 Q8403, Q8503, Q8754, Q8758 Q8101, Q8102, Q8753, Q8759 D8401, D8802 D8201 2SD2114K DTA124EK DTC124EK 1SS355 MTZJ5.6B D8901, D8902 D8601, D8602 MTZJ6.8B UDZS6.8B LAU220J CAPACITORS F CN5502 7P Connector CN5509, CN5802 11P Connector CN5701 13P Connector CN5503, CN5801 17P Plug CN5504 21P Plug C AF ASSY(XWZ3618) E L5501 RD1/2PM121J RD1/2PM331J RD1/4PU102J RD1/4PU152J RD1/4PU473J C5502 (0.047F) C5962, C5963 C5901, C5903, C5906 C5958, C5959 C5531 ACH1246 CCSRCH101J50 CCSRCH331J50 CEAL100M16 CEAL100M50 C5530 C5510, C5702, C5717, C5718 C5803, C5804, C5953, C5955, C5956 C5507, C5805 C5951 CEAL1R0M50 CEAT100M50 CEAT100M50 CEAT1R0M50 CEAT220M50 CAPACITORS C8212 C8705, C8706, C8709, C8710, C8755 C8759 C8217 CCSRCH101J50 CCSRCH331J50 CCSRCH331J50 CCSRCH471J50 XV-EV51 66 1 2 3 4 5 Mark No. 6 Description Part No. 7 Mark No. 8 Description Part No. C8609, C8610 CCSRCH820J50 C8111 C8113, C8119, C8120, C8221, C8509 C8510, C8752, C8752, C8822, C8826 C8833, C8834 C8789, C8823 CEAL100M50 CEAT100M50 CEAT100M50 CEAT100M50 CEAT101M16 IC8111, IC8801 IC8301 IC8101 IC8201 IC8802, IC8803 AN4558NS BA3838F BU4052BCF M65847AFP NJM4558MD C8902 C8305, C8308, C8309, C8310, C8601 C8602, C8701, C8702, C8751 C8117, C8118, C8201, C8213, C8222 C8307, C8625, C8626, C8829, C8831 CEAT1R0M50 CEAT2R2M50 CEAT2R2M50 CEAT470M16 CEAT470M16 IC8901 Q8401, Q8402 Q8201 Q8501, Q8502 Q8403, Q8503 NJM7812FA 2SC2412K 2SD1858X 2SD2114K DTA124EK C8905, C8906, C8907, C8908 C8312 C8903 C8220, C8605, C8606 C8101, C8103, C8107, C8108, C8203 CEAT470M16 CEAT4R7M50 CKSQYF105Z25 CKSRYB102K50 CKSRYB103K50 Q8101, Q8102 D8401, D8802 D8201 D8901, D8902 DTC124EK 1SS355 MTZJ5.6B MTZJ6.8B C8204, C8205, C8218, C8313, C8514 C8519, C8615, C8616, C8619, C8621 C8623, C8624, C8715, C8716, C8723 C8724, C8725, C8726, C8727, C8728 C8729, C8730, C8736, C8763, C8764 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 C8771, C8772, C8773, C8774, C8775 C8776, C8778, C8779, C8810, C8811 C8812, C8813, C8828, C8830 C8301, C8302, C8303, C8407, C8515 C8518, C8754 SEMICONDUCTORS B CAPACITORS C8212 C8217 C8111 C8113, C8119, C8120, C8221 C8509, C8510, C8822, C8826 CCSRCH101J50 CCSRCH471J50 CEAL100M50 CEAT100M50 CEAT100M50 CKSRYB103K50 CKSRYB103K50 CKSRYB103K50 CKSRYB104K16 CKSRYB104K16 C8833, C8834 C8789, C8823 C8902 C8305, C8308-C8310 C8117, C8118, C8201, C8213, C8222 CEAT100M50 CEAT101M16 CEAT1R0M50 CEAT2R2M50 CEAT470M16 C8219 C8603, C8604 C8904 C8304 C8756 CKSRYB122K50 CKSRYB222K50 CKSRYB223K50 CKSRYB224K10 CKSRYB333K25 C8307, C8829, C8831, C8905-C8908 C8312 C8903 C8220 C8101, C8103, C8107, C8108 CEAT470M16 CEAT4R7M50 CKSQYF105Z25 CKSRYB102K50 CKSRYB103K50 C8703, C8704, C8753 C8216 C8202, C8223, C8306, C8788, C8824 C8207, C8208, C8209 C8760 CKSRYB471K50 CKSRYB472K50 CKSRYB473K25 CKSRYB683K16 CKSRYB821K50 C8203-C8205, C8218, C8313, C8514 C8519, C8810-C8813, C8828, C8830 C8301-C8303, C8407, C8515, C8518 C8219 C8904 CKSRYB103K50 CKSRYB103K50 CKSRYB104K16 CKSRYB122K50 CKSRYB223K50 C8206 C8513 C8214, C8215 CKSRYB822K50 CKSRYF105Z10 CKSRYF224Z16 C8304 C8216 C8202, C8223, C8306, C8788, C8824 C8207-C8209 C8206 CKSRYB224K10 CKSRYB472K50 CKSRYB473K25 CKSRYB683K16 CKSRYB822K50 C8513 C8214, C8215 CKSRYF105Z10 CKSRYF224Z16 RESISTORS R8216 R8724, R8814 R8901, R8904 R8625, R8717, R8718, RD1/4PU102J RD1/4PU470J RD1/4PU471J R8626RD1/4PU821J R8721RS1/16S1002F CN8301 4P Jumper connector CN8751, CN8901 17P Socket CN8101 21P Socket Heat sink Screw 52147-0410 AKP7072 AKP7074 ANH-309 BBZ30P080FMC JA8401 4P Pinjack CN8701 8P Socket XKB3040 XKP3052 D R8216 R8814 R8901, R8904 R8808-R8811 E RD1/4PU102J RD1/4PU470J RD1/4PU471J RS1/16S1002F OTHERS CN8301 4P Jumper connector CN8901 17P Socket CN8101 21P Socket Heat sink Screw 52147-0410 AKP7072 AKP7074 ANH-309 BBZ30P080FMC JA8401 4P Pinjack XKB3040 F J DISP 1 ASSY C AF ASSY(XWZ3628) XV-EV51 5 C RESISTORS R8722, R8767, R8768, R8769 RS1/16S1002F R8770, R8808, R8809, R8810, R8811 RS1/16S1002F Other Resistors RS1/16S###J OTHERS A 6 7 67 8 1 Mark No. Description SEMICONDUCTORS Q5101 D5102, D5103 D5105, D5106 A 2 3 Part No. Mark No. 2SC2412K 1SS133 MTZJ6.8B SEMICONDUCTORS D5203, D5205 UDZS6.8B OTHERS SWITCHES AND RELAYS CN5203 KR Connector ASG7013 C5109 C5110 C5103 C5108 C5106 CCSRCH100D50 CCSRCH220J50 CEAT101M10 CEAT470M16 CKSRYB102K50 C5101, C5104 C5111 C5105 CKSRYB103K50 CKSRYB104K16 CKSRYB681K50 S2B-PH-K M MIC ASSY CAPACITORS B Part No. 51048-0300 L LED ASSY LAU220J S5101, S5102, S5103, S5104, S5105 Description 5301 3P Cable holder COILS AND FILTERS L5101 4 SEMICONDUCTORS IC5401 IC5402 Q5402 Q5401 D5401 M65855FP NJM4558MD 2SJ103 DTA143EK MTZJ5.1B COILS AND FILTERS RESISTORS R5106 Other Resistors L5401 RD1/4PU101J RS1/16S###J CAPACITORS OTHERS CN5101 11P Connector 5101 Remote recevier unit C 52044-1145 GP1U26X I DISP 2 ASSY SEMICONDUCTORS Q5201 D5206, D5207 D5202, D5204 2SC2412K 1SS355 MTZJ6.8B SWITCHES AND RELAYS S5201, S5202, S5203, S5204, S5205 S5206, S5207, S5208, S5209, S5210 S5211 D ASG7013 ASG7013 ASG7013 CAPACITORS C5201 LAU100J CKSRYB103K50 C5418, C5419, C5427, C5428 C5409 C5416 C5401 C5422 CCSRCH101J50 CEAL220M16 CEAL2R2M50 CEAT101M16 CEAT2R2M50 C5420 C5432 C5433 C5421, C5426 C5431 CEAT470M16 CEAT4R7M50 CEATR22M50 CEJQ2R2M50 CEJQ4R7M50 C5410 C5423 (XWZ3626) C5423 (XWZ3623) C5404, C5408, C5411, C5430 C5402, C5412, C5429, C5436 CEJQR47M50 CKSRYB102K50 CKSRYB331K50 CKSRYB103K50 CKSRYB104K16 C5414 C5405 C5406 C5407 CKSRYB122K50 CKSRYB123K50 CKSRYB472K50 CKSRYB473K25 RESISTORS R5211 Other Resistors RESISTORS RD1/4PU101J RS1/16S###J R5401 VR5401 10k-B Other Resistors OTHERS E 5202 3P Cable holder 5201 5P Cable holder J5202 3P Jumper wire J5102 Jumper wire J5203 Connector Assy 51048-0300 51048-0500 D20PYY0320E D20PYY0510E PF02PG-B07 LED Holder XMR3053 OTHERS 5401 4P Cable holder J5401 Jumper wire KN5401 Earth metal FIT. JA5401, JA5402 MIC Jack SEMICONDUCTORS SWITCHES AND RELAYS F > IC1902 ASG7013 RESISTORS Other Resistors 51048-0400 D20PYY0430E VNF1084 XKN3012 G DVD IF ASSY H DISP 3 ASSY S5301, S5302, S5303 RD1/4PU561J XCS3007 RS1/16S###J RS1/16S###J OTHERS IC1941 > IC1906 > IC1901, IC1903 IC1921 BA06FP MM1567AJ NJM2391DL1-33 NJM78M05DL1A PCM1742KE > IC1904 PQ025EH01ZP XV-EV51 68 1 2 3 4 5 Mark No. 6 Description > IC1905S-8540 IC1962 IC1961 Q1931 > Q1901C Part No. B00FN-IMA TC74VHC125FT TC74VHCT125AFT 2SA1576A Q1941, Q1961 Q1942 Q1921, Q1922, Q1932 D1901, D1932-D1935 PH6312 RN1903 RN2903 UN5212 1SS355 D1902 D1931 RB051L-40 UDZS5.1B 7 Mark No. RB501V-40 A L6990 (330mH) L300 L5010, L5020, L5040 ( Chip 60mH) ATL7007 LCYA2R7J2520 VTL1075 CAPACITORS ATL7003 ATL7004 ATL7005 C1931, C1932 C1920 C1901, C1904, C1906, C1912, C1925 C1930, C1953 C1910, C1917 CCSRCH102J50 CCSRCH121J50 CEV101M16 CEV101M16 CEV221M4 C1903, C1908, C1928, C1950, C1996 C1915 C1902, C1905, C1907, C1909, C1918 C1923, C1924, C1926, C1929, C1933 C1941, C1943, C1945, C1947-C1949 CEV470M6R3 CKSQYB105K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 C1951, C1952, C1955-C1957 C1961, C1962, C1991-C1995 C1914, C1999 C1916, C1919, C1998 (Ceramic C) CKSRYB104K16 CKSRYB104K16 CKSYB475K16 DCH1148 RESISTORS R1903 (0.068 1/4w) R1904 (0.1 1/10w) R1994, R1995 R1907 R1906 ACN7113 ACN7114 RS1/10S0R0J RS1/16S1502F RS1/16S3902F R1908 RS1/16S4700F RKN1039 RKN1057 RKN1067 F DVDM ASSY SEMICONDUCTORS IC110 IC251 IC604 IC302 IC301 BA10358FV BA6664FM K4S641632F-TC75 K6T1008V2E-TB70 L6315ATXXTY IC351 IC601 IC605 IC603 M56788AFP PQ018EZ01ZP STI5519AVB-B0C TC7WU04FU VYW1948 Q300, Q602-Q607 Q652 Q101, Q102 Q103 Q601 2SA1576A DTC114TUA HN1A01F HN1C01FU RN4982 C301, C302 C310 C307 C360 C391 CCSRCH100D50 CCSRCH151J50 CCSRCH180J50 CCSRCH330J50 CCSRCH331J50 C351, C651 C627, C638, C696 C309 C633, C634 C308 CCSRCH470J50 CCSRCH471J50 CCSRCH560J50 CCSRCH6R0D50 CCSRCH7R0D50 C113 C104 C316, C317, C405, C617, C619 C111, C404 C368 CEV100M35 CEV101M4 CEV101M6R3 CEV220M16 CEV470M16 C334 C340, C641 C259, C311 C106, C248-C251, C255, C313 C315, C636, C637, C697 CKSQYB225K10 CKSRYB102K50 CKSRYB103K50 CKSRYB104K16 CKSRYB104K16 C257, C258 C357 C103, C105, C148, C157, C158 C253, C256, C304, C321-C333 C365, C366, C603, C605, C607 CKSRYB223K50 CKSRYB472K50 CKSRYF104Z25 CKSRYF104Z25 CKSRYF104Z25 C612, C615, C616, C632 C606, C608-C611, C613 C622, C623, C629, C635, C699 CKSRYF104Z25 CKSRYF105Z10 CKSRYF105Z10 R121 R123 R340, R407 R341 R126-R129, R176-R179 RAB4C220J RAB4C390J RS1/10S0R0J RS1/10S101J RS1/10S220J R254-R259 R326-R330 R147, R265, R266, R304, R322 R377, R378, R392, R393 R344, R351, R353, R354 RS1/10S3R3J RS1/16S1001F RS1/16S1002F RS1/16S1002F RS1/16S1003D R359, R360, R365, R367, R368 R372, R374, R376 R331, R385 R302 R358, R394 RS1/16S1003D RS1/16S1003D RS1/16S1003F RS1/16S1202F RS1/16S1503F R146 R612, R613 R675, R678, R681, R684, R687 R690 R345, R355, R370, R371 RS1/16S1801F RS1/16S1802F RS1/16S2700F RS1/16S2700F RS1/16S3902F R346, R356, R357, R362, R364 R373 R3730 RS1/16S6802F RS1/16S6802F RS1/16S8202F XV-EV51 5 6 B C D RESISTORS OTHERS > IC303 (1.8V) Part No. COILSANDFILTERS CAPACITORS CN1901, CN1961 30P Connector CN1902 16P Connector CN1962 26P Connector Description D601 COILSANDFILTERS L1901 (SMP Power Inductor) L1902 (SMP Power Inductor) L1903 (SMP Power Inductor) 8 7 E F 69 8 1 Mark No. 2 Description 3 Part No. Mark No. OTHERS A CN2 12P Connector CN8 26P Connector CN4 4P Connector CN9 PH Connector 7P Flexible Cable AKN7031 AKN7032 RKN1045 S5B-PH-SM3 VDA1681 CN25 26P Connector CN22 30P Connector X301 Crystal RES.(20MHz) X601 Crystal RES.(27MHz) VKN1318 VKN1322 VSS1171 VSS1172 D LOAB ASSY B OTHERS CN602 KR Connector CN601 KR Connector PCB BORD 101 Reaf SWITCH S2B-PH-K S5B-PH-K VNP1836 VSK1011 E DECK ASSY(XWX3067) D IC2202, IC2301, IC2401 IC2201 Q2254 Q2801, Q2802, Q2805 Q2806 BA4558F-HT HA12136AF 2SA1037K 2SC1815 2SC2240 Q2251-Q2253 Q2261, Q2262, Q2301, Q2302 Q2351, Q2460 Q2303, Q2304 Q2255, Q2352, Q2263 2SC2412K 2SK373 DTA124EK DTC114TK DTC143EK D2256, D2301-D2306 D2252-D2255, D2307 D2201 1SS133 1SS355 MTZJ6.2A F C2403 C2805, C2806, C2810 C2314 C2315 C2231 CEJQ1R0M50 CEJQ330M10 CEJQ470M16 CKSRYB102K50 CKSRYB103K50 C2431, C2432 C2211, C2212 C2252 C2808 C2801 CKSRYB122K50 CKSRYB152K50 CKSRYB334K10 CQHA822J2A CQMA123J50 C2421, C2422 C2409, C2410 C2803, C2804 C2802 C2209, C2210 CQMA152J50 CQMA223J50 CQMA472J50 CQMA682J50 CQMBA103J50 C2307, C2308 C2405, C2406 CQMBA682J50 CQMBA683J50 OTHERS CN2506 CN2302 CN2507 CN2301 PCB SEMICONDUCTORS LFA121J RTD1082 RTF1004 RTF1021 RTF1217 C2809 C2301, C2302 C2423, C2424 C2253 C2256, C2257, C2321-C2324 CCCSL151K2H CCSRCH100D50 CCSRCH221J50 CCSRCH271J50 CCSRCH470J50 C2401, C2402 C2303, C2304 C2807 C2203, C2204, C2207, C2311, C2312 C2215 CCSRCH470J50 CCSRCH681J50 CEAL470M6R3 CEAT100M50 CEAT101M16 C2201, C2202, C2217, C2218, C2255 C2404, C2419, C2420 C2251 C2216 C2254 CEAT1R0M50 CEAT1R0M50 CEAT220M50 CEAT221M16 CEAT2R2M50 C2309, C2310, C2407, C2408 C2425 C2261, C2262 CEAT330M50 CEAT470M16 CEAT4R7M50 AKP7072 B2B-PH-K B3P-SHF-1AA B4B-PH-K VEF1040 E DECK ASSY(XWX3066) CAPACITORS E Part No. CEATR10M50 CEATR22M50 R2805 RD1/2VM161J R2803 RD1/2VM4R7J VR2301,VR2302,VR2401,VR2402(4.7k)PCP1028 VR2801, VR2802(100k-B) PCP1032 COILSANDFILTERS L2802 L2801 (OSC 105kHz) L2401, L2402 (10mH) L2403, L2404 (4.7mH) F2201, F2202 (MPX. Filter) Description C2208 C2205, C2206 RESISTORS SEMICONDUCTORS C 4 IC2202, IC2301, IC2401 IC2201 Q2254 Q2801, Q2802, Q2805 Q2806 BA4558F-HT HA12136AF 2SA1037K 2SC1815 2SC2240 Q2251-Q2253 Q2261, Q2262, Q2301, Q2302 Q2351, Q2460 Q2303, Q2304 Q2255, Q2352, Q2263 2SC2412K 2SK373 DTA124EK DTC114TK DTC143EK D2256, D2301-D2306 D2252-D2255, D2307 D2201 1SS133 1SS355 MTZJ6.2A COILSANDFILTERS L2802 L2801 (OSC Coil 105k) L2401, L2402 (10mH) L2403, L2404 (4.7mH) F2201, F2202 (MPX FIL.) LFA121J RTD1082 RTF1004 RTF1021 RTF1217 CAPACITORS C2809 C2301, C2302 C2423, C2424 C2253 C2303, C2304 CCCSL151K2H CCSRCH100D50 CCSRCH221J50 CCSRCH271J50 CCSRCH681J50 XV-EV51 70 1 2 3 4 5 Mark No. 6 Description 7 8 Part No. C2807 C2203, C2204, C2207, C2311, C2312 C2215 C2201, C2202, C2217, C2218, C2255 C2404, C2419, C2420 CEAL470M6R3 CEAT100M50 CEAT101M16 CEAT1R0M50 CEAT1R0M50 C2251 C2216 C2254 C2309, C2310, C2407, C2408 C2425 CEAT220M50 CEAT221M16 CEAT2R2M50 CEAT330M50 CEAT470M16 C2261, C2262 C2208 C2205, C2206 C2403 C2805, C2806, C2810 CEAT4R7M50 CEATR10M50 CEATR22M50 CEJQ1R0M50 CEJQ330M10 C2314 C2315 C2231 C2431, C2432 C2211, C2212 CEJQ470M16 CKSRYB102K50 CKSRYB103K50 CKSRYB122K50 CKSRYB152K50 C2252 C2808 C2801 C2421, C2422 C2409, C2410 CKSRYB334K10 CQHA822J2A CQMA123J50 CQMA152J50 CQMA223J50 C2803, C2804 C2802 C2209, C2210 C2307, C2308 C2405, C2406 CQMA472J50 CQMA682J50 CQMBA103J50 CQMBA682J50 CQMBA683J50 A B C RESISTORS R2805 RD1/2VM161J R2803 RD1/2VM4R7J VR2301,VR2302,VR2401,VR2402(4.7k)PCP1028 VR2801, VR2802 (100k-B) PCP1032 D OTHERS CN2506 17P SOCKET CN2302 CONNECTOR POST CN2507 3P CONNECTOR CN2301 KR CONNECTOR PCB BINDER AKP7072 B2B-PH-K B3P-SHF-1AA B4B-PH-K VEF1040 E F XV-EV51 5 6 7 71 8 1 2 3 4 6. ADJUSTMENT 6.1 DECK SECTION A 6.1.1 Adjustment condition For adjustment, use the stereo power amplifier (M-EV51 or M-EV21). 7 Adjustment Condition B (1) The ground at the time of adjustment shall be W166. (Refer to Fig. 6–3). (2) Clean the heads and demagnetize them using a head eraser. (3) Set the measurement level to 0 dBV = 1 Vrms. (4) Use the specified tape for adjustment. Use the labeled (A) side of the test tape. NCT–111 : For Tape Speed adjustment NCT-112 : For Playback adjustment STD–633 : Normal blank tape * As the reference recording level is 250 nwb/m for NCT– 112, the recording level will be higher than 4 dB for NCT– 112 (160nwb/m). When adjusting, pay carefully attention to the type of tape used. C (5) Provide yourself with the following measuring devides: ÷ AC millivoltmeter ÷ Low-frequency oscillator ÷ Attenuator ÷ Oscilloscope (6) Adjust both right and left channels unless other wise specified. (7) Turn the DOLBY NR switch off unless otherwize specified. (8) Warm up the unit for several minutes before adjustment. In particular, be sure to warm up the unit in the REC/PLAY mode for 3 to 5 minutes before starting recording/playback frequency characteristics adjustment. (9) Always follow the indicated adjustment order. Otherwise, a complete adjustment may not be achieved. 7 List of Adjustments ¶ Playback Section (1) Tape Speed Confirmation (2) Head Azimuth Adjustment (3) Playback Level Adjustment ¶ Recording Section (1) Recording Bias Adjustment (2) Recording Level Adjustment PLAY BACK 250 3dB 10k 3dB 12.5k 4dB RECORDING 12.5k 250 3dB 10k 3dB 5dB D Fig. 6-1 Frequency Characteristics Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. 0 dB E 30s 315 Hz 0 dB: 315 Hz, 250 nwb/m 30 s 30 s 6.3 kHz 10 kHz 30 s 10s 315 Hz 10s .......................................................................................................... 10s –20 dB 12.5 6.3 500 250 125 14 kHz kHz 10 kHz 8 kHz kHz 4 kHz 2 kHz 1 kHz Hz Hz Hz 63 Hz 40 Hz Fig. 6-2 Test Tape NCT– 112 F XV-EV51 72 1 2 3 4 5 6 7 8 6.1.2 Playback and Recording section 7 A Playback Section (1) Tape Speed Confirmation No. Mode Input Signal/Test Tape Adjustment Points 1 PLAY NCT-111 (3 kHz) VR2701 (DECK ASSY) (Refer to Fig. 6-3) Measurement Points P1 R (CN2507) (DECK ASSY) Adjustment Value 3000 Hz +10 –10 Hz Remarks FWD adjustment REV Confirmation ( 3000 Hz +40 –40 Hz ) (2) Head Azimuth Adjustment ¶ This unit is equipped with auto tape selector. ¶ Do not switch between forward and reverse operation with the screwdriver inserted. B No. Mode Input Signal/Test Tape Adjustment Points Measurement Points Adjustment Value Remarks 1 PLAY NCT-110 test tape (Playback: 10 kHz, –20 dB) Head azimuth adjustment Screw (Refer to Fig. 6-3) P3 L (CN2507) P1 R (CN2507) (DECK ASSY) Max. Playback signal level After adjustment, apply silicon bond to the head azimuth adjustment screw. Adjustment Value Remarks (3) Playback Level Adjustment ¶ Since this adjustment determines playback DolbyNR level, Perform it carefully. No. Mode Input Signal/Test Tape 1 PLAY NCT-112 test tape (Playback: 315 Hz, 4 dB) 7 Adjustment Points L ch VR2301 R ch VR2302 Measurement Points P3 L (CN2507) P1 R (CN2507) C –3.7 dBV (DECK ASSY) Recording Section (1) Recording Bias Adjustment ¶ After the adjustment, caution should be exercised so as not to become under bias by checking the distortion rate. No. Mode Input Signal/Test Tape Adjustment Points 1 REC/ PAUSE Input a 315Hz signal to the LINE IN terminal. ∗ Input signal level REC = PLAY Load the STD–633 test tape and record/playback the 315Hz and 10kHz signals. (see the Note below) 2 L ch VR2801 R ch VR2802 Measurement Points Adjustment Value D Remarks –23.7 dBV P3 L (CN2507) P1 R (CN2507) (DECK ASSY) Repeat adjustment until playback level of the 10kHz signal is within 0dBV ±0.5dB from that of the 315Hz signal. Note: Set the 10kHz input signal level to the same value as the 315Hz input signal level of step 1. E (2) Recording Level Adjustment No. Mode Input Signal/Test Tape Adjustment Points 1 REC/ PAUSE Input a 315Hz signal to the LINEIN terminal.∗ Input signal level REC = PLAY STD–633 test tape and record/ playback the 315Hz signal. 2 L ch VR2401 R ch VR2402 Measurement Points Adjustment Value Remarks –7.7 dBV P3 L (CN2507) P1 R (CN2507) (DECK ASSY) Repeat recording, playback and adjustment until playback level of the 315Hz signal becomes –7.7dBV±0.5dB. F XV-EV51 5 6 7 73 8 1 2 74 3 4 XV-EV51 F Fig. 6-3 Adjustment and Measurement Points RCH 1 W228 C2261 C2262 1 3 W247 3 W248 1 17 CONTACT SIDE D2256 F2201 PRINTED SIDE DI P ICT FC C2255 CN2506 IC2202 C2209 C2210 LCH L DECK TP C2254 R CN2507 XNP3061-A W246 W219 GNDA GNDA W218 F2202 PRINTED SIDE VA12 C2251 W249 W227 MS W250 D2201 DECK ASSY W230 C2215 W223 W251 VREF W252 GNDA W253 VREF GNDA W231 C2203 IC2201 C2216 W232 VA12 C2204 W233 W221 W234 C2206 C2205 W254 C2208 W236 GNDA W235 VA12 W255 W263 W222 W256 W257 CMKS-P3X C2207 VR2302 Rch W240 W239 R2321 Lch C2312 VREF GNDA W241 W242 C2311 Rch IC2301 C2418 C2417 C2310 C2404 C2403 C2309 W260 VREF W261 VA12 Adj. C2410 C2425 C2408 L2403 IC2401 Production Code C2308 L2404 W243 C2409 C2307 C2314 W224 C2807 Q2805 W244 C2407 C2406 Q2301 Q2302 D2306 D2305 C2420 C2419 CN2301 C2422 L2402 C2421 1 L2401 4 1 C2405 Q2803 R2805 Lch W229 C2217 BIG PB LEVEL VR2302 (Rch) VR2301 (Lch) R2806 OPEN 4 Q2802 C2808 D2304 VR2802 Rch C2803 1 6 3 SIDE 4 W262 Q2806 C2809 A BIG C2801 C2810 Lch 2 PRINTED 1 2 Adj. VR2801 BIAS 1 OPEN D2303 SIDE A L2801 C2805 C2806 2 Q2801 L2802 C2804 BIAS D2301 D2302 R2803 REC LEVEL PB LEVEL Adj. W237 GNDA C2218 VA12 VREF W258 VA12 W259 C2201 W238 C2202 VR2301 VR2401 VR2402 CN2302 E C2802 VR2802 (Rch) VR2801 (Lch) W225 3 W220 2 RECR 1 4 17.RECL PBL 15.GNDA PBR 3 5 XPBMUTE DOL ON\OFF 10.RECMUTE PB/XREC XBEATCUT BIAS DGND 5.VA+12 VA+12 MS VB+12 1.GNDB 2 4 17 REV Azimuth Adjustment Screw 1 5 VR2401 (Lch) 1 FWD Azimuth Adjustment Screw E CN2507 (DECK TP) MECHANISM UNIT D VR2402 (Rch) REC LEVEL C B DECK ASSY A 1 3 4 5 6 7 8 6.2 TUNER SECTION A 6.2.1 AM TUNER SECTION There is no adjustment in the AM tuner. 6.2.2 FM TUNER SECTION Set the mode selector to FM BAND. Connect the wiring as shown in Fig. 6-5. Step No. 1 Adjustment Title T-METER Adjustment ANT. Input level and signal condition Input Level Frequency Modulation (dBµV) (MHz) 98 OFF MPX SG 80 Adjustment Adjust point Contents L201 Adjust L201 so that the DC voltage between Pin 21 and Pin 23 of IC201 (Test point Vtm) gets within 0 ± 50mV. DC Voltmeter PRODUCT FM SG B FM75Ω antenna terminal Fig.6.5 Adjustment Wiring Diagram C A FM/AM TUNER UNIT D L201 IC201 pin 21 pin 23 E SIDE B Fig.6.6 Adjustment Point F XV-EV51 5 6 7 75 8 1 2 3 4 6.3 DVD SECTION ADJUSTMENT ITEMS ana LOCATION Adjustment Items A Adjustment Points (Mechanism Part) [Mechanism Part] 1 Tangential and Radial Height Coarse Adjustment Cautions: After adjustment, adjustment screw locks with the Screw tight. 2 DVD Jitter Adjustment 3 Initialize the Focus Sweep Setting 1 2 Radial adjustment screw 1 2 Tangential adjustment screw [Electrical Part] Electrical adjustments are not required. B C D 6.4 JIGS and MEASURING INSTRUMENTS Screwdriver (large) E Screwdriver (medium) TV monitor Test mode remote control unit (GGF1067) Screw tight (GYL1001) Precise screwdriver DVD test disc (GGV1025) F XV-EV51 76 1 2 3 4 5 6 7 8 6.5 NECESSARY ADJUSTMENT POINTS When Adjustment Points A Exchange Parts of Mechanism Assy Mechanical ~, Ÿ, ! point Exchange the Pickup ∗ After adjustment, screw locks with the Screw tight. Electric point Mechanical ! point Exchange the Traverse Mechanism B Electric point ∗ After adjustment, screw locks with the Screw tight. Mechanical Ÿ, ! point Exchange the Spindle Motor Electric point C Exchange PCB Assy Mechanical point Exchange PC Board LOAB, DVDIF and DVDM ASSY Electric point D ∗ Purpose: To set the sweep which was correct with the individual Traverse mechanism. Be sure to perform the following step finally when replaced Pickup, Traverse Mechanism and Spindle Motor. ESC CLEAR E GGF1067 Test mode remote control unit (It is necessary when performed adjustment procedure Ÿ.) F XV-EV51 5 6 7 77 8 1 2 3 4 6.6 TEST MODE TEST MODE: ON A Power Amplifier ESC TEST POWER GGF1067 Test mode remote control unit ON B TEST MODE: DISC SET CHECK DVD Tuner DeckOPEN/CLOSE DVD, CD OPEN/CLOSE DVD disc (Player or Remote Control Unit) (Player or Remote Control Unit) DSC - &&& C TEST MODE: PLAY TV/LDP An address is displayed D CAUTION: Perform only trace, video and audio output are nothing. < When playback with the target address of disc (DVD)> For example, when playback with # 30000 During PLAY +10 3 0 0 0 0 CHP/TIM Press keys in order 030000 E TEST MODE: OFF Power Amplifier ESC POWER OR GGF1067 Test mode remote control unit OFF F XV-EV51 78 1 2 3 4 5 6 7 8 6.7 MECHANISM ADJUSTMENT A 1 Tangential and Radial Height Coarse Adjustment START • Remove the servo mechanism. • Remove a Spacer for height adjustment attached to the back side (shaded area) of the Servo Mechanism (Float Base) with nippers. Cautions: Because there is not a Spacer for height adjustment in adjustment after the second time, will keep it at need. (This parts is Traverse mechanism exclusive use of a model for 2001 years) 7.3mm B Servo Mechanism Float Base Put a spacer between a Tangential (or Radial) adjustment screw and Mechanism Base and turn each screw to adjust the height. (Refer to "6.3 ADJUSTMENT ITEMS AND LOCATION".) Spacer for Height adjustment Note: Turn the Short switch to Short side when removing the Pickup Flexible Cable. (Refer to "7.1.6 DISASSEBLY".) Turn a flat side into bottom C D E F XV-EV51 5 6 7 79 8 1 2 3 4 2 DVD Jitter Adjustment • Playback method of inner and outer address for the purpose is refererd to "6.6 TEST MODE". • Jitter indication of the monitor is refererd to "7.1.1 TEST MODE (Display Specification of the Test Mode)". A Use disc: GGV1025 START Mechanism Assy • Test mode • Play the DVD test disc at outer track (around #200000) Adjust the Tangential Adjustment Screw so that jitter becomes minimum. • Play the DVD test disc at inner track (around #30000) J : Min B Mechanism Assy Adjust the Radial Adjustment Screw so that jitter becomes minimum. J : Min C J: ---- Monitor • Play the DVD test disc at outer track (around #200000) Player D Mechanism Assy Readjust the Tangential Adjustment Screw so that jitter becomes minimum. CHECK Turn the POWER OFF in case of NG once, and perform the adjustment once again. NG Confirm the error rate that is displayed "OK" (Example ERROR RATE: 6.6oe - 6 OK ) K J : Min O E If error rate is OK, locks a root of tangential and radial adjustment screws with the Screw tight, and go to step ! . Disc playback normally. • The measurement of block error rate ESC ESC 5 Screw tight: GYL1001 Test mode end F XV-EV51 80 1 2 3 4 5 6 7 8 3 Initialize the Focus Sweep Setting A Purpose: To set the sweep which was correct with the individual Traverse mechanism. Turn on the Player POWER ESC CLEAR B Note: Be sure to perform this step when replaced the Pickup or Traverse mechanism. C D E F XV-EV51 5 6 7 81 8 1 2 3 4 7. GENERAL INFORMATION 7.1 DIAGNOSIS A 7.1.1 TEST MODE Test Mode Functional Specification 1 How to Enter Test mode Turn the power on while short-circuiting with TEST jumper (W284) and VE+5 jumper (W282) on the IF Assy. Indicate with "U-TEST" in this time. 2 Release the test mode • Turn off the power. • Press the [ESC] (A8-5F) key of the remote control unit and reset it. B 3 Tray open / close • Press the [REPEAT A-B] (A8 - 48) key of the remote control unit. • Press the [OPEN / CLOSE] key of the main unit from the stop state. 4 Playback stop • Press the [REPEAT] (A8 - 44) key of the remote control unit from the playback state. 5 LD ON DVD : Press the [TEST] (A8-5E) and [1] (A8-01) keys in order, and turn on the laser diode (650n). CD : Press the [TEST] (A8-5E) and [4] (A8-04) keys in order, and turn on the laser diode (780n). 6 Focus on / sweep 1. Lock the focus by pressing the [TEST] (A8-5E) and [2] (A8-02) keys in order. 2. Repeat focus sweep by pressing the [TEST] (A8-5E) and [3] (A8-03) keys in order. C 7 Spindle FG servo CAV : Press the [TEST] (A8-5E) and [5] (A8-05) keys in order,then rise up the spindle and it becomes FG servo on. CLV : Press the [TEST] (A8-5E) and [9] (A8-09) keys in order,then rise up the spindle and it becomes FG servo on. 8 Tracking open / close 1. Open tracking by pressing the [STEP FWD] (A8-54) key of the remote control unit in the play state. 2. Close tracking by pressing the [STEP REV] (A8-50) key of the remote control unit in the play state. D 9 Slider servo on/off 1. Turn on the slider servo by pressing the [TEST] (A8-5E) and [CX] (A8-0E) keys in order. 2. Turn off the slider servo by pressing the [TEST] (A8-5E) and [TV/LDP] (A8-0F) keys in order. 0 Slider in / out Slider in : In the tracking off state, press the [SCAN REV] (A8-11) key of the remote control unit. Slider out : In the tracking off state, press the [SCAN FWD] (A8-10) key of the remote control unit. - Play (perform only the ID search and trace to the specified location) Press the [TV/LDP] (A8-0F) key of the remote control unit from the stop state. Perform only trace, video and audio output are nothing. E = Screen display ON/OFF 1. Turn off the display by pressing the [AUDIO] (A8-1E) key of the remote control unit. 2. Turn on the display by pressing the [DISPLAY] (A8-43) key of the remote control unit. F XV-EV51 82 1 2 3 4 5 6 7 8 ~ Search 1. Search address input entry • It becomes the address input mode when pressing the [+10] (A8-1F) key. (Most significant digit of an address displays ">".) • In this time, display the last address as the initial state. A 2. Search address input • Press the [0] to [9] (A8-00 to 09) keys of the remote control unit. In the DVD, set an address with hexadecimal. • In the address input mode, turn to the hexadecimal input by pressing the [PROGRAM] (A8-4C) key (display a "∗" mark) and [1] to [6]keys are each input as A to F. • In this time, do not accept the [7],[8],[9] and [0] keys. Hexadecimal input and decimal input can switch with toggle. • In case of CD, perform only the absolute time search. 3. Search execution • Press the [CHP/TM] (A8-13) key of the remote control unit. • After the search, perform only trace and video and audio outputs are nothing. B 4. Release the Search address input • Clear the address by pressing the [CLEAR] (A8-45) key. Release the address input mode when pressing the [CLEAR] key once again. C D E F XV-EV51 5 6 7 83 8 1 2 3 4 Display Specification of the Test Mode 2 Character in bold : Item name : Information display A 3 7 8 9 12 14 1 5 6 13 15 10 11 B C 16 17 18 19 1 Address indication The address being traced is displayed in number. (as for the DVD, indication of decimal number is possible.) DVD : ID indication (hexadecimal number, 8 digits) [∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗] CD : A-TIME (min. sec.) [0 0 0 0 ∗ ∗ ∗ ∗] 0 Disc sensing [DSC – ∗ ∗ ∗] The type of discs loaded is displayed. [DVD], [CD ], [VCD], [ ] 2 Code indication of remote control unit [R – ∗ ∗ ∗ ∗] In case of double code, display a 2nd code. = Version of the AV-1 chip / version of firmware [AV: ∗ ∗ / ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗] 3 Main unit keycode indication [K – ∗ ∗] ~ Version of the FL controller [FL: ∗ ∗ ∗ ∗] 5 Tracking status [TRKG – ∗ ∗ ∗] Tracking on : [ON] Tracking off : [OFF] ! Region setting of the player [REG: ∗] Setting value : [1] to [6] @ Destination setting of the FL controller [MDL: ∗ ∗ ∗ ∗ / ∗ ∗ ∗] Four characters in the front represent the type of model. Three characters in the back represent the destination code. J: /J, K: /KU, /KC, /KU/KC, R: /RAM/RL/RD, LB: /LB, WY: /WY 6 Spindle status [SPDL – ∗ ∗ ∗] [OFF], [A/B] (ACC/BRK), [CAV], [CLV] D 7 Mechanism (loading) position value [M – ∗ ∗] Unknown : [01] or [41] Open state : [04] Close state : [08] During opening : [12] During closing : [22] # Part number of the flash ROM [∗ ∗ ∗ ∗ ∗ ∗] $ Version of the flash ROM [V: ∗. ∗ ∗ ∗] Flash ROM size [FLSH = ∗] 8 Slider position [S – ∗ ∗ ∗ ∗] CD TOC area : [IN ] CD active area : [CD] E - Jitter value [J – ∗ ∗ ∗ ∗] % Revision of the system controller [S: ∗ . ∗ / ∗ ∗ ∗ ] 9 Output video system [V – ∗ ∗ ∗ ∗] NTSC system : [NTSC] PAL system : [PAL] Automatic setting : [AUTO] Scart terminal output [SK – ∗ ∗] (Display only the WY model which can do the output setting of scart terminal.) VIDEO : [00] S-VIDEO : [01] RGB : [02] ^ Revision of the DVD mechanism controller [M: ∗ / ∗ ∗] F XV-EV51 84 1 2 3 4 5 6 7 8 Shortcut key Functional Specification Only in the normal playback, the following setting can by pressing the required key after having pressed the "TEST" key of the remote control unit. How to release: Press the "ESC" key. (function with indication) Command Contents Conditions Memory clear & region / revision indication CLEAR (LD remote control unit) A8-45 Average value measurement of DVD error rate 5 (LD remote control unit) A8-05 CD error rate measurement 5 (LD remote control unit) A8-05 Aspect: Pan scan 2 A6-01 Aspect: Letter box 3 A6-02 Aspect: Wide 4 A6-03 Digital: PCM 5 A6-04 Digital: AC-3/PCM 6 A6-05 B Virtual Dolby: VDD=OFF Only correspondence model 7 A6-06 Virtual Dolby: VDD=ON Only correspondence model 8 A6-07 Digital output ON REPEAT A A6-A1, AF-E8 Digital output OFF REPEAT B A6-95 DTS Digital Out ON STEP FWD A6-A1, AF-B7 DTS Digital Out OFF STEP REV A6-A1, AF-B8 A6-A1, AF-BE Scart terminal output: VIDEO WY, Model to include scart AUDIO Scart terminal output: S-VIDEO WY, Model to include scart SUBTITLE A6-A1, AF-36 Scart terminal output: RGB WY, Model to include scart ANGLE A6-A1, AF-B5 Audio 5.1CH ON Only correspondence model KD_ENTER A6-74 FL indication of EDC / ID error C CX (LD remote control unit) A8-0E ZOOM ON Only correspondence model ZOOM A6-A1, AF-37 ZOOM OFF Only correspondence model < X3 (LD remote control unit) A8-59 Service mode indication (error rate indication, etc.) CHP/TIM (LD remote control unit) A8-13 Model information indication CHAP (LD remote control unit) A8-40 Background color change +10 (LD remote control unit) A8-1F Audio last stage mute ON 9 A6-08 Audio last stage mute OFF 0 A6-09 Title search SIDE A (LD remote control unit) A8-4D Numbers (LD remote control unit) A8-00 to A8-09 PLAY (LD remote control unit) A8-17 Input mode IN Title No. input Search execution A Remote Control Key Name Remote Control Code D AUDIO (LD remote control unit) A8-1E Numbers (LD remote control unit) A8-01 to A8-08 Region confirmation mode • Service mode indication ID Address Always display error rate. Exponential indication ∗.∗∗e-∗ (with both DVD and CD) EDC/ID/AV1 error history (ID Address, EDC/ID/AV1 Error, errors of past eight times) Self-diagnostic function (when mechanism error occurred, display the mechanism error history) • Error rate average value total (ESC +5) Calculation number of times displays exponent from average value of eight times. After the calculation result, display OK/NG. Tray is open in case of NG (with both DVD and CD) DVD: OK with less than 8.0e-4 CD: OK with less than 7.6e-4 E Note: Because an OK/NG judgment cannot be DVD with a static image mode as menu screen, confirm it by an animation. • Model information indication contents (ESC+CHAP) Display = to ^ in the test mode indication. However, Change the indication of S as B.E VERSION and it of M as F.E VERSION. Refer to the "Specification of Model Information Display". • Background color change (ESC+ +10) Change black and green with toggle whenever pressing the key (the background color that green is using with SETUP NAVIGATOR). • Region confirmation mode (ESC+ A.MON + 1to 8) Input region No. after pressing the ESC+A.MON keys. When it is different from the setting, display and open the tray. F XV-EV51 5 6 7 85 8 1 2 3 4 Specification of Model Information Display • Display contents A 3 2 1 4 5 6 7 8 9 10 B Character in bold : Item name : Information display C 1 Model name Display it according to model information set from the FL controller. 2 Destination indication Display it according to model information set from the FL controller. 3 Region No. 4 Part number 5 ROM version 6 Flash size 7 FL controller version 8 CHIP VERSION Version of ST CHIP CUT ID / JTAG ID D (two columns) (eight columns) 9 B.E VERSION Version of BACK END (version of ST core software) . / softwareVersion . softwareRevision / buildNumber 0 F.E VERSION Version of FRONT END (version of mechanism controller CHIP software) / MainVersion / SubVersion E F XV-EV51 86 1 2 3 4 5 6 7 8 Functional Specification of the Service Mode • FL indication of EDC / ID error (short cut function) A Display it in FL with ESC+CX keys (LD remote control unit). Indication is released with ESC key during indication. FL indication contents 00 /00 / 01 ∗ Display number of the location that caused EDC and ID errors Retry number of times of the latest ID error Retry number of times of the latest EDC error B ∗ mark: When even once causes AV1 error, lights. • Service mode screen display Display to the screen with ESC+CHP/TIM keys. Release the indication with ESC key. Indication contents ID Address 1 Always indicate error rate 2 and exponent indication EDC/ID/AV1 error history (ID Address, EDC/ID/AV1 Error, past eight times) 3 Contents of AV1 error BIT 0: EDC error, FEC I/F buffer overflow and not valid occur in the BE code (B.E error). BIT 1: ID is different from the target in the BE code (B.E error). BIT 2: There is error in the EDC data of 2 bytes which added to the FE (F.E error). C • Self-diagnostic function 4 Check that the F.E is normal or not. FE OK : Abnormality is not found in the F.E. FE Error : Abnormality is found in the F.E. Indicate the mechanism error history by pressing the CHP/TIM key once again. Change indication by pressing the CHP/TIM key with toggle afterwards. Refer to the "Display of the Mechanism Error History". D Indication plan contents 3 1 2 4 E Character in bold : Item name : Information display F XV-EV51 5 6 7 87 8 1 2 3 4 7.1.2 DISPLAY OF THE MECHANISM ERROR HISTORY A 3 Error contents indication Indicate the error contents which occurred with character. When mechanism error (FE error) occurred, the mechanism error history of maximum past eight times is displayed by pressing the CHP/TIM key during service mode screen display. Indication displayed in the screen upper part is new error. Examples: When Error code is 0x13 (Focus lost timeout) and Servo state is 0x05 (Disc judge), "Focus lost timeout in Disc judge" • Indication contents 1 Error code Two characters in the front represent the Error Code and two characters in the back represent the Servo State. The detail is as follows. ∗ Movement in the error occurrence: open the tray when SERVO STATE is Disc Judgs, and others stop. However, error code is exception in the device error of 0xd∗. Servo State Error Code B Indication contents 2 Error occurrence time Error indicates the time which occurred after system turned on the power supply. ∗ When time of new error is short, it becomes assumed power off once. 2 3 2 3 1 1 C • Table of Error Code 0x0∗ FOCUS TIMEOUT 0x1∗ 0x00 Reset Focus on error 0x01 Focus on timeout 0x11 0x01 Stop (inside position) Focus off error 0x02 Focus off timeout 0x12 0x02 Stop (any position) Focus lost error 0x03 Focus lost timeout 0x13 0x03 Braking for stop Focus balance adjust error 0x04 Focus balance adjust timeout 0x14 0x04 New disc Focus gain adjust error 0x05 Focus gain adjust timeout 0x15 0x05 Disc judge Focus sweep error 0x06 Focus sweep timeout 0x16 0x06 Reserved 1 Focus reflection error 0x07 Focus reflection timeout 0x17 0x07 Playing Start up 0x2∗ TRACKING TIMEOUT 0x3∗ 0x08 Tracking on error 0x21 Tracking on timeout 0x31 0x09 Seeking Tracking off error 0x22 Tracking off timeout 0x32 0x0A Pausing TRACKING ERROR D E • Table of Servo State FOCUS ERROR Tracking lost error 0x23 Tracking lost timeout 0x33 0x0B Reading BCA Tracking balance adjust error 0x24 Tracking balance adjust timeout 0x34 0x0C Reserved 2 Tracking gain adjust error 0x25 Tracking gain adjust timeout 0x35 0x0D Tracking jump timeout Tracking jump error 0x26 0x36 0x0E STEPPING ERROR 0x4∗ STEPPING TIMEOUT 0x5∗ 0x0F Stepping on error 0x41 Stepping on timeout 0x51 Stepping off error 0x42 Stepping off timeout 0x52 Stepping lost error 0x43 Stepping lost timeout 0x53 Stepping move error 0x44 Stepping move timeout 0x54 SPINDLE ERROR 0x6∗ SPINDLE TIMEOUT 0x7∗ Spindle on error 0x61 Spindle on timeout 0x71 Spindle off error 0x62 Spindle off timeout 0x72 Spindle lost error 0x63 Spindle lost timeout 0x73 Spindle CAV error 0x64 Spindle CAV timeout 0x74 Spindle CLV error 0x65 Spindle CLV timeout 0x75 ACQUISITION ERROR PLL lost error DECODER ERROR ID lost error DEVICE ERROR F SRAM error 0x8∗ 0x83 0xa∗ 0xa3 0xd∗ 0xd1 ACQUISITION TIMEOUT PLL lost timeout 0x9∗ 0x93 DECODER TIMEOUT ID lost timeout 0xb∗ 0xb3 FAIL SAFE 0xe∗ unexpected error 0xe1 XV-EV51 88 1 2 3 4 5 6 7 8 ERROR CODE TABLE Error Name No. Causes Check Item Possibility of Trouble Remarks FOCUS ERROR (0 x 0∗) A Focus on error 0 x 01 Focus on could not be completed Are not there a dirt or a scratch in 1. Pickup the Disc? Does LD become weak? 2. Driver Does the lens move up and down? 3. L6315 (Front End IC) Focus off error 0 x 02 Focus off could not be completed Unknown Focus lost error 0 x 03 Focus servo is lost Are not there a dirt or a scratch in 1. Pickup the Disc? Does LD become weak? Focus balance adjust error 0 x 04 AFB on could not be completed Focus gain adjust error 0 x 05 Focus AGC could not be completed Focus sweep error 0 x 06 Focus reflection error 0 x 07 Dimensions of S curve did not reach to the aim value Does LD become weak? 1. Pickup FOCUS TIMEOUT (0 x 1∗) Focus on timeout 0 x 11 Did timeout at focus on Focus off timeout 0 x 12 Did timeout at focus off Focus lost timeout 0 x 13 Did timeout at focus backup Focus balance adjust timeout 0 x 14 Did timeout at AFB Focus gain adjust timeout 0 x 15 Did timeout at AGC Focus sweep timeout 0 x 16 Are not there a dirt or a scratch in 1. Pickup the Disc? Does LD become weak? 2. Driver Does the lens move up and down? 3. L6315 (Front End IC) B TRACKING ERROR (0 x 2∗) 1. Pickup 2. Driver 3. L6315 (Front End IC) Tracking on error 0 x 21 Tracking on could not be completed Tracking off error 0 x 22 Tracking off could not be completed Tracking lost error 0 x 23 Tracking servo is lost 1. Pickup Tracking balance adjust error 0 x 24 ATB could not be completed 1. Pickup Tracking gain adjust error 0 x 25 AGC could not be completed 1. Pickup Tracking jump error 0 x 26 Tracking jump could not be completed C TRACKING TIMEOUT (0 x 3∗) Are not there a dirt or a scratch in the Disc? 1. Pickup 2. Driver 3. L6315 (Front End IC) Are not there a dirt or a scratch in the Disc? 1. Pickup Tracking on timeout 0 x 31 Did timeout at tracking on Tracking off timeout 0 x 32 Did timeout at tracking off Tracking lost timeout 0 x 33 Did timeout at tracking backup Tracking balance adjust timeout 0 x 34 Did timeout at ATB 1. Pickup Tracking gain adjust timeout 0 x 35 Did timeout at AGC 1. Pickup Tracking jump timeout 0 x 36 Did timeout at tracking jump D STEPPING ERROR (0 x 4∗) Stepping on error 1. Pickup 2. Driver 3. L6315 (Front End IC) 0 x 41 Stepping on could not be completed Stepping off error 0 x 42 Stepping off could not be completed Stepping lost error 0 x 43 Stepping servo is lost Stepping move error 0 x 44 Stepping could not move Do move to inner and outer periphery 1. Stepping motor of the stepping in the test mode? 2. Inside switch Do indicate "S-04" at the most inner 3. Driver periphery of the stepping? E STEPPING TIMEOUT (0 x 5∗) 1. Pickup 2. Driver 3. L6315 (Front End IC) Stepping on timeout 0 x 51 Did timeout at stepping on Stepping off timeout 0 x 52 Did timeout at stepping off Stepping lost timeout 0 x 53 Did timeout at stepping backup Stepping move timeout 0 x 54 Did timeout at stepping movement Do move to inner and outer periphery 1. Stepping motor of the stepping in the test mode? 2. Inside switch Do indicate "S-04" at the most inner 3. Driver periphery of the stepping? F XV-EV51 5 6 7 89 8 1 Error Name 2 No. 3 Causes 4 Check Item Possibility of Trouble SPINDLE ERROR (0 x 6∗) A Spindle on error 0 x 61 Spindle on could not be completed Spindle off error 0 x 62 Spindle off could not be completed Spindle lost error 0 x 63 Spindle lost control Spindle CAV error 0 x 64 CAV on could not be completed Spindle CLV error 0 x 65 CLV on could not be completed SPINDLE TIMEOUT (0 x 7∗) Spindle on timeout 0 x 71 Did timeout at spindle on Spindle off timeout 0 x 72 Did timeout at spindle stop Spindle lost timeout 0 x 73 Did timeout at spindle backup Are not there a dirt or a scratch in the Disc? Is FG output from the driver? 1. Spindle motor 2. Spindle driver Spindle CAV timeout 0 x 74 Did timeout at CAV on Is spindle rotating? Is FG output from the driver? Is the PDM output from L6315? 1. Spindle motor 2. Spindle driver 3. L6315 (Front End IC) Spindle CLV timeout 0 x 75 Did timeout at CLV on 0 x 83 PLL is lost Are not there a dirt or a scratch in the Disc? 1. Pickup 2. L6315 (Front End IC) 0 x 93 Did timeout at PLL backup Are not there a dirt or a scratch in the Disc? 1. Pickup 2. L6315 (Front End IC) 0 x a3 ID is not readable Are not there a dirt or a scratch in the Disc? 1. Pickup 2. L6315 (Front End IC) 0xb3 Are not there a dirt or a scratch in the Disc? 1. Pickup 2. L6315 (Front End IC) Power supply of SRAM Is not bus line short-circuiting? 1. SRAM 2. L6315 (Front End IC) 3. L6315-SRAM bus line B ACQUISITION ERROR (0 x 8∗) PLL lost error ACQUISITION TIMEOUT (0 x 9∗) PLL lost timeout DECODER ERROR (0 x a∗) ID lost error DECODER TIMEOUT (0 x b∗) C ID lost timeout Did timeout at ID backup DEVICE ERROR (0 x d∗) SRAM error 0 x d1 Cannot access SRAM FAILSAFE (0 x e∗) Unexpected error 0 x e1 1. software runaway 3. Software bug Unexpected error D E F XV-EV51 90 1 2 3 4 Remarks 5 6 7 8 7.1.3 TRUBLE SHOOTNG Confirm the error history at first. When a history was not displayed, refer to the following table. No. Symptoms Cannot power on 1 A Defectiveness Assumption Points Diagnosis Contents Check Voltage of CN8901-17pin(VE+56) on the AF assy. M-EV51(21) , system cable connection Check the stand by indicator. If the indicator brinking , the protect circuit working. (Stand by indicator brinking) AMP PROTECT , DVD POWER SUPPLY Check IC5501-4pin(AC PULSE). M-EV51(21) , system cable connection U-COM Check IC5501-12pin,13pin (CF1,CF2) B Standby indicator brinking (DVD ERR) Check IC5501-17pin(VDET) is 3.5V 1.Connection of DVDIF assy & IF assy. 2.DVD power supply, 3.M-EV51(21) POWER SUPPLY 2 Standby indicator brinking (AMP ERR) Check FAN connect in M-EV51(21). M-EV51(21) , system cable connection Check FAN connect in M-EV51(21). M-EV51(21) , system cable connection M-EV51(21) , system cable connection Check IC3301,IC3401 in AMP module. Audio is not out put 3 4 VIDEO no out put Check connection AF assy & IF assy. AF ASSY & IF ASSY Check signal waveform of CN8751 1,3,5,7,9,11pin (C,SW,LS,RS,FL,FR) at DOLBY PROLOGIC mode. Check signal waveform at CN8701-all pin., CN8751-13,15pin(ANAL,ANAR) DSP ASSY C AF ASSY Are the signals output from IC11-pin 9, 8 and 7 on the FLKB Assy ? (around 0-3V) IF assy & DVD IF assy connection. DVD IF ASSY D E F XV-EV51 5 6 7 91 8 1 No. 2 Symptoms Cannot open a tray (An opening screen is displayed on the monitor) A Cannot playback (Focus does not inn) 5 Cannot playback (Spindle does not turn) C 4 Defectiveness Assumption Points Diagnosis Contents Does voltage of CN9-pin 3 and 5 on the DVDM Assy change normally ? pin 3 (XCLOSE) : It is "H" level by the state that has finished doing CLOSE. Tray switch pin 5 (OPEN) : It is "H" level by the state that has finished doing OPEN. Does LOAD_DRV signal come ? BACK END IC (DVDM IC601) Is a signal output from IC351-pin 14 and 15 (CN9-pin 1 and 2) on the DVDM Assy ? FTS Driver IC (pin 15 : It is about 6V during tray opening, It is about 0V during tray closing) (DVDM IC351) (pin 14 : It is about 0V during tray opening, It is about 6V during tray closing) 4 B 3 Are not there wire rod coming out, damage the connectors of CN9 and CN5 on the DVDM Assy ? Connector / wire rod Does voltage of CN5-pin 1 on the DVDM Assy change when pressed the inside switch ? Inside switch Are the signals output from IC351-pin 9 and 10 on the DVDM Assy ? FTS Driver IC (DVDM IC351) Does 650 LD emit light ? Does a pickup lens do up / down ? Does not an actuator spring bend ? Pickup Are not resin part damage, a shaft missing ? Are not there falling off of turn table, lean abnormality ? Mechanism Assy Is not flexible cable of CN7 on the DVDM Assy coming off and damaged ? Flexible cable / connector Is signal output from IC301-pin 123 (FACT) on the DVDM Assy ? (Device control of around 500 mV is output usually. It is ± around 100 mV swing by focus up / down.) FRONT END IC (DVDM IC301) Are the signals output from IC251-pin 2 (A3), pin 4 (A2) and pin 7 (A1) Spindle Driver IC on the DVDM Assy ? It is fixed, and is not there pin 18 HIGH whethere it is fixed, and there is (DVDM IC251) not pin 23 LOW ? Are not there part falling off, alien substance adhesion in spindle motor Mechanism Assy (Spindle motor) part ? 6 Is not flexible cable of CN7 on the DVDM Assy coming off and damaged ? Flexible cable / connector Is signal output from IC301-pin 123 (SPDL_PDM) on the DVDM Assy ? FRONT END IC (DVDM IC301) Cannot playback (Playback stops) Does not 650nm LD deteriorate ? 650nm LD deteriorates. If there is the both ends voltage of R121 on the DVDM Assy more than (Cannot playback DVD) 0.7V, 650nm LD deteriorates surely. Does not 780nm LD deteriorate ? 780nm LD deteriorates. If there is the both ends voltage of R123 on the DVDM Assy more than (Cannot playback CD) 1.2V, 780nm LD deteriorates surely. D 7 Is not there abnormality in FG waveform ? FG output : Spindle Driver IC (DVDM IC251) Are not there scratch and a dirt on the disc ? Disc 8 Picture disturbance during playback (block noise, freeze, other) Are not there scratch and a dirt on the disc ? Do not you set a disc of standard outside ? Disc 9 Audio is not output (Picture is normal) Check the waveform (BCK, LRCK, MCLK, DATA). BACK END IC (DVDM IC601) Is signal output from IC711-pin 7 and 8 on the JCKB Assy ? AUDIO DAC IC (JCKB IC711) E F XV-EV51 92 1 2 3 4 5 6 7 8 EVA emergency processing specification A 1. About Emergency process When abnormality of hardware of power supply short circuits and so on occurred, turn the power OFF without an usual step in a moment. And perform process to limit the later power ON operation. 2. Category of error to perform the Emergency process As for the error to perform the Emergency process, there are two kinds of the following. • PROTECT error: Error by power supply of the amplifier section and abnormality of the fan Overcurrent detection of amplifier DC voltage detection of amplifier Fan open and lock detection Abnormal detection of 8V and 15V • DVD error: Error by power-failure in the DVD module B 3. Condition to enter Emergency process • PROTECT error: When PROTECT port (pin 92) of the microcomputer was L more than 90 mS (less than 0.15VDD +0.4V). • DVD error: When 3.3DET port (pin 17) of the microcomputer was more than 90mS, and were less than 2.5V or more than 4.25V. * Do not perform the error detection during 1.5 seconds after the power ON operation start at both ports. 4. State after the power OFF STANDBY LED flashes in case of both of PROTECT and DVD errors 5. Possibility or no of re-power ON • PROTECT error: Power ON is once again possible after the power OFF 60 seconds later. Indicates "POW ERR" instead of "WELCOME" in this time. * When pulled the AC power cord out after the power OFF within 60 seconds, cannot turn the power ON for 60 seconds after inserting the AC power cord once again. * Flash of STANBY LED is continued even if it passes after the power OFF for 60 seconds. C • DVD error: Power ON is once again possible after the power OFF 60 seconds later. Indicates "DVD ERR" instead of "WELCOME" in this time. * When pulled the AC power cord out after the power OFF within 60 seconds, cannot turn the power ON for 60 seconds after inserting the AC power cord once again. * Flash of STANBY LED is continued even if it passes after the power OFF for 60 seconds. 6. Recovery method of within 60 seconds after PROTECT error, and after DVD error When turn the power ON once again after turning the power OFF within 60 seconds in the PROTECT error, and after turned the power OFF in the DVD error, it is necessary to start with the test mode. To enter the Test mode, turn the power on while short-circuiting with TEST jumper (W284) and VE+5 jumper (W282) on the IF Assy. Indicate with "U-TEST" in this time. D In addition, RAM of the microcomputer is reset to the factory shipping state when releasing the service test mode with the power OFF. Then power ON can normally from the next time. (When error is left, enter the Emergency process once again.) Protection circuit 1 Diagnosis method when the protection circuit turned to OFF at normal connection (MEDIA-AMP) When enter the individual operation mode, a protection circuit does not work. E 2 The release method that "power cannot turn on for 60 seconds" Enter the test mode by supplying AC power (or DC power in the individual operation) while short-circuiting the jumpers with "TEST" indication on the IF ASSY, waiting for 60 seconds is released. Be because the microcomputer was reset then. F XV-EV51 5 6 7 93 8 1 2 3 4 7 SINGLE OPERATION METHOD A Individual operation method of XV-EV51,EV21 (MEDIA) Jigs and Measuring instruments V A B DC powersupply Single purpose operation method. 1 Supply DC power to each point, and all the divided GND short-circuits. DC apply point Voltage 8V 8V 16V 1 2 3 C Locations Apply Point Name W497 IC5508 IN W264 V+8V C8902 + side VU+12V Assy Name IF Assy IF Assy AF Assy IGND short circuit point 1 2 3 Locations GND Name Assy Name CN8901 16PIN W132 W395 GNDD GNDA GNDM AF ASSY AF ASSY IF ASSY D 2 Supply a DC power while short-circuiting the jumpers (W282 and W285) with "SERVICE" indication on the IF Assy. TEST MODE : STOP → CANCEL Y OR EM ST. M ·S TO P E DC powersupply IF ASSY V DC Output (+8.0V) 7 A Power SW +8.0V off STOP All Operations GND The DC power supply (+8.0V) is turned off. F XV-EV51 94 1 2 3 4 5 6 7 8 7.1.4 SEQUENCE AFTER POWER ON Flow chart from power on to the picture output A STANDBY Spindle turn Power on operation by a user (remote controller key or product key) Read ID information code FL controller receives a message Various setting [FL controller] LCD lighting / outputs a power on signal (POWER ON: "L"→"H") B The picture output [FL controller] Release the reset for BACK END (XRESET: "L"→"H") C [BACK END] Accesses flash ROM and 64M SDRAM [BACK END] Accesses FRON END [BACK END] Request communication to the FL controller (FP_ACK) D [FL controller] Outputs the signal which can communicate to BACK END (FP_XRDY) BACK END – FL controller communication E The opening picture output [FRONT END] Identifies the following: • Slider positioning (INSIDE SW) • Spindle FG stop Disc detection (Focus control) F XV-EV51 5 6 7 95 8 1 2 3 7.1.5 DISASSEMBLY 1 Deck Mechanism Section 1 2 A 4 2 Front Panel Section 1 2 3 4 Remove the Side Bonnet L and R (screws × 14) Remove two screws 2 2 Remove two screws Remove a FFC and connector Unhook × 4 Remove the Front Panel Section AF Assy B CN8301 2 IF Assy 2 CN5509 Rear View C 3 4 5 Release two binders Remove the earth lead wire (screw × 1) Remove the Deck Mechanism Section (FFC × 1, connectors × 2) Deck Mechanism Section 5 D 4 5 CN5802 Earth Lead Wire E 3 3 5 5 4 3 CN2302 CN2301 3 3 1 1 IF Assy Note : Front Panel can removes with the state which Tray Panel was attached to it. In this time, remove bottom part of the Front Panel first so that the Tray Panel is not caught. DECK Assy Note : Operation check of the main unit is possible even if removes the Deck Mechanism Section. F XV-EV51 96 1 2 3 4 5 6 7 8 3 DVD Mechanism Section 1 5 Remove three screws Remove four screws 5 A 5 Top View Rear View B 1 1 1 C DVD Mechanism Section 5 2 3 4 Remove a screw 6 Remove a Fan connector 5 Remove the DVDM and DVD IF Assys (screws × 6) (with Shield Plate and Plastic Plate) Caution : Be careful to installation order of the Shield Plate and Plastic Plate. Remove the DVD Shield Section 5 Shield Plate and Plastic Plate DVDM Assy 5 D ×2 5 5 4 3 ×3 CN5510 5 2 E DVD Shield DVD Mechanism Section DVD IF Assy Bottom View F XV-EV51 5 6 7 97 8 1 7 2 3 4 Styling like figure below. A DECK Assy AF Assy Rear View Turn the Pickup Short SW before Pickup Flexible Cable removed. DVD IF Assy DVDM Assy Short B DSP Assy (XV-EV51 Only) " before Pickup Flexible cable removed make short by solder " IF Assy LOADING MECHA Assy C Diagnosis D 4 Tray 1 2 Remove the Bridge (screw ×1). Pull out the Tray and remove it while unhooking a hook. Caution in the Tray Insertion 2 1 -1 1 -1 In the Tray insertion, insert it after matching a triangle mark of the Loading Base and a position of pin of the Drive Cam. -2 Triangle Mark Loading Base Hook E 2 -2 Pin Drive Cam F XV-EV51 98 1 2 3 4 5 6 5 Traverse Mechanism Assy-S 1 Cautions : Screw is locked with Silicone Adhesive. Please lock it with Silicone Adhesive when installs it. 3 4 Traverse Mechanism Assy-S Remove two Skew Screws and two Skew Springs 3 Pickup Assy-S Skew Screw 3 Skew Spring 1 A Remove the Pickup Assy-s 4 Silicone Adhesuve GEM1037 -1 8 When Removing The Pickup Assy-S Remove the FFC Holder with the state which Flexible Cable was atatched. (Screw × 1) 1 7 Skew Skew Screw -2 Spring B FFC Holder Bottom View 2 C Remove the Pickup Flexible Cable Pickup Assy-S 5 Remove two Screws Cautions : Screw is locked with Silicone Adhesive. Please lock it with Silicone Adhesive when installs it. 3 4 Unhook ( × 4) D Remove the Traverse Mechanism Assy-S 5 Silicone Adhesive GEM1037 Slider 3 ×2 Hold Spring 4 2 E Pickup Assy-S Joint 3 ×2 Traverse Mechanism Assy-S 5 Silicone Adhesive GEM1037 F XV-EV51 5 6 7 99 8 1 2 3 4 STYLING THE PICKUP FLEXIBLE CABLE A 1 2 FOLD a edge of lining part of the Pickup Flexible Cable. Insert the Pickup Flexible Cable in connector, and lock it surely. Pickup Assy-S B 2 1 7 8 Bottom View Conducting Plane FFC Holder Caution : Move the Pickup to the innermost of the disc C 3 Perform the styling as shown in figure below. 10 Lose slack 9 Fold position of step 6 D 1 Bottom View 2 3 Fold at the position of reference line. Bottom View Reference line 6 E 11 55 4 12 Bottom View Bottom View F XV-EV51 100 1 2 3 4 5 6 7 8 7.2 PARTS • The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams. A List of IC BA6664FM, L6315ATXXTY, M56788AFP, STI5519AVB-B0C, PCM1742KE, MM1567AJ, PDC093 BA6664FM (DVDM ASSY : IC251) • Spindle Driver Block Diagram A3 2 28 RNF DRIVER GAIN SWITCH GAIN CONTROL A1 7 Vcc CURRENT SENSE AMP TL HALL AMP TORQUE PS GND 8 B 27 VM TSD A2 4 26 GSW 25 VCC 24 FG 23 PS SENSE AMP H1+ 9 22 EC H1- 10 Vcc Vcc 21 ECR C 20 FR H2+ 11 19 FG2 R H2- 12 D Q CK Q SHORT BRAKE H3+ 13 18 SB 17 CNF H3- 14 BRAKE MODE 16 BR HALL BIAS 15 VH D Pin Function No. Pin Name 1 N.C. 2 A3 3 N.C. Pin Function No. Pin Name Pin Function N.C. 16 BR Brake mode switching pin Output pin 17 CNF Capacitor connection pin for phase compensation N.C. 18 SB Short brake pin 4 A2 Output pin 19 FG2 5 N.C. N.C. 20 FR 6 N.C. N.C. 21 ECR Output pin 22 EC Output voltage control pin GND pin 23 PS Power save pin 7 A1 8 GND FG 3-phase mix signal output pin Rotation detecting pin E Control reference pin of output voltage 9 H1+ 24 FG 10 H1- 25 VCC FG signal output pin 26 GSW 27 VM Motor power pin Power supply pin 11 H2+ 12 H2- 13 H3+ 28 RNF Resistor connection pin for output current detection 14 H3- FIN FIN GND 15 VH Hall signal input pins Gain switching pin F Hall bias pin XV-EV51 5 6 7 101 8 1 2 3 4 3 4 L6315ATXXTY (DVDM ASSY : IC301) • Front End IC A Block Diagram B C D E F XV-EV51 102 1 2 5 6 7 8 Pin Function No. Pin Name I/O Pin Function 1 IREF 2 GNDAI Analog ground Analog input Analog power supply ground 3 RFSACD Analog output RF output for SA-CD support 4 RFIN 5 RFOUT Analog output 6 VCCA18 Analog supply Input stage power supply 7 TST_ADC Analog output RF path analog test pin 8 TST_SLICE Analog output PM analog test pin 9 TST_PM Analog output PM analog test pin Analog input 10 A 11 GNDMN 12 B 13 VCC33MN Bandgap filtering input RF path data input (after AC coupling) RF path data output (before AC coupling) Analog input Input stages laser diode A Analog ground Input stages ground main Analog input Input stages laser diode B Analog supply Input stages 3.3 V misc. 14 REFD Analog output Reference voltage for pickup 15 VCC18IS Analog supply Input stages 1.8 V main 16 D Analog input 17 VCCA18IS 18 C Analog supply Analog input Input stages 1.8 V misc. Input stages laser diode C Analog supply Input stages 3.3 V misc. 20 GNDAIS Analog ground Input stages ground misc. 21 VCC33SD Analog supply Input stages 3.3 V side 22 VCC18SD Analog supply Input stages 1.8 V side 23 GNDSD Analog ground Input stages ground side Analog input Input stages laser diode F 25 E Analog input 26 VSHIELIS Analog ground Input stages laser diode E Analog supply ADC digital power supply 28 VSSADC Analog ground ADC digital ground supply 29 VCCADC Analog supply ADC analog power supply 30 GNDADC Analog ground ADC analog ground supply 31 VSHIELDADC Analog ground ADC shield − 33 BOOT_MODE C IS shield 27 VDDADC 32 NC B Input stages laser diode D 19 VCC33IS 24 F A D − Digital input Boot mode 34 VSS Digital ground VSS I/O 35 VDD3 Digital supply VDD I/O (3.3 V) 36 PC[0] (NC) Digital I/O − 37 PC[1] (PS) Digital I/O Driver IC power save 38 PC[2] (FG) Digital I/O FG pulse input 39 PC[3] (SB) Digital I/O Spindle short brake 40 PC[4] (SLDPOS) Digital I/O Slider position input E F XV-EV51 5 6 7 103 8 1 No. A 2 Pin Name 3 I/O 4 Pin Function 41 PC[5] (VROFST) Digital I/O VREF offset adjustment (stand-by) 42 PC[6] (SPDL_PDM) Digital I/O Spindle drive output 43 PC[7] (OEICG) Digital I/O OEIC gain sw 44 VSS Digital ground VSS core 45 VDD3S Digital supply VDD core 46 VSS_SPL Digital ground VSS I/O 47 RAM_DQM Digital output SDRAM DQM 48 RAM_WEN Digital output RAM write enable Digital output SRAM address 49 RAM_CASN / Sradr14 50 RAM_RASN / Sradr15 B 51 RAM_A[13] 52 RAM_A[12] 53 RAM_A[11] 54 RAM_A[10] 55 RAM_A[0] 56 RAM_A[1] 57 RAM_A[2] 58 RAM_A[3] 59 RAM_A[4] C 60 RAM_A[5] 61 RAM_A[6] 62 RAM_A[7] 63 RAM_A[8] 64 RAM_A[9] 65 RAM_CLK / Sradr16 66 VDD_SPL Digital supply VDD I/O 67 VDD3 Digital supply VDD I/O 68 VSS Digital ground VSS I/O 69 RAM_DQ[0] D 70 RAM_DQ[1] 71 RAM_DQ[2] 72 RAM_DQ[3] 73 RAM_DQ[4] Digital I/O SRAM data 74 RAM_DQ[5] 75 RAM_DQ[6] 76 RAM_DQ[7] E 77 VDD3S Digital supply VDD core 78 VSS Digital ground VSS core 79 OUT_REQ Reserved 80 OUT_ERR Digital output Must be set to ground Output interface F XV-EV51 104 1 2 3 4 5 No. Pin Name 6 7 I/O 8 Pin Function 81 OUT_SYNC Digital output Output interface 82 OUT_DVALID Digital output Output interface 83 OUT_CLK Digital output Output interface 84 OUT_DATA[0] (FE_DATA) Digital output Output interface 85 OUT_DATA[1] (FE_EVALID) Digital output Output interface: BW com 86 OUT_DATA[2] (FE_ECCBST) Digital output Output interface: BW com Digital output Reserved 92 VDD3 Digital supply VDD I/O 93 VSS Digital ground VSS I/O A 87 OUT_DATA[3] 88 OUT_DATA[4] 89 OUT_DATA[5] 90 OUT_DATA[6] 91 OUT_DATA[7] B 94 PE[0] (FE_INIT) Digital I/O FE initialize input 95 PE[1] (NC) Digital I/O − 96 PE[2] (DMA) Digital I/O DMA input 97 PE[3] (SCL) Digital I/O I2C clock input 98 PE[4] (SDA) Digital I/O I2C data input 99 PD[0] (NC) Digital I/O − 100 PD[1] (NC) Digital I/O − 101 PD[2] (NC) Digital I/O − 102 PD[3] (NC) Digital I/O − 103 PD[4] (NC) Digital I/O − 104 PD[5] (NC) Digital I/O − 105 PD[6] (NC) Digital I/O − Digital I/O − 106 PD[7] (NC) 107 VDD3 Digital supply VDD I/O 108 VSS Digital ground VSS I/O 109 VPP_TEST Digital input Test input 110 VCCD_BYP Digital supply VDD core 111 VCCD_OUT − C D No voltage to be applied 112 VSS Digital ground VSS core 113 VDD3S Digital supply VDD core 114 VSS Digital ground VSS I/O 115 VDD3 Digital supply VDD I/O 116 RESET_IN Digital input 117 VCC18DAC Analog supply DAC analog power supply 118 STEPER1 Analog output DAC spindle motor 119 STEPER2 Analog output DAC sled motor 120 REFEXT Analog input Global reset signal E DAC external reference F XV-EV51 5 6 7 105 8 1 No. A Pin Name I/O DAC analog ground supply 122 REFDAC Analog output DAC reference voltage 123 FACT Analog output DAC focus actuator Digital output Analog ground − 126 NC 127 VCCA33 Analog supply − 128 NC 129 GNDPLL Analog ground 130 PLLOFF Analog input 131 FREOUT Analog output 132 FREIN Analog input 4 Pin Function Analog ground 125 GNDDAC C 3 121 REFGND 124 TACT B 2 DAC tracking actuator DAC analog ground − DAC analog power supply − PM analog ground PM reference disable PLL PM reference frequency output PM reference frequency input 133 VCCPLL Analog supply PM analog power supply 134 SREG1 Analog output External bipolar base 135 VCCR33 Analog supply Analog power supply for regulator 136 SREG2 Analog output External bipolar base 137 LD1 Analog output Laser control laser diode 1 138 LD2 Analog output Laser control laser diode 2 139 VCCA33 Analog supply Analog power supply for input stages + 140 LCREF Analog output Laser control DAC reference 141 LMD1 Analog input Laser control monitor diode 1 142 LMD2 Analog input Laser control monitor diode 2 143 GNDL Analog ground 144 VBGFILT Analog input Ground for laser control detection Bandgap filtering input D E F XV-EV51 106 1 2 3 4 5 6 7 8 M56788AFP (DVDM ASSY : IC351) • FTS Driver IC A Block Diagram B C D E F XV-EV51 5 6 7 107 8 1 2 3 4 3 4 STI5519AVB-B0C (DVDM ASSY : IC601) • Back End IC A Block Diagram B C D E F XV-EV51 108 1 2 5 6 7 8 Pin Function No. Pin Name I/O Pin Function 1 FP_SO OUT Front Panel interface. (Soft) Serial transfer data output. 2 A_DATA3 OUT Reserved 3 XAMUTE OUT 4 VDD_3V3 − 3.3 V Power supply 5 VSS − Ground 6 AQE_XCS OUT Reserved Audio Quality Enhancer IC's chip-select output. 7 SQUEEZ OUT S-Video output S1/S2 control signal at squeez output mode 'H'. 8 LETTER OUT S-Video output S1/S2 control signal & EURO(SCART) connecter (FUNCTION SWITCHING) signal at letter-box output mode 'H'. TRYPOS OUT 9 TRYPOS IN Analog audio output line muteing output 'L'. In case of NOT carusel 5 disc changer, this port is N.C.(output) For EURO(SCART) connecter (BLINKING) signal 'L' : RGB output disable 'H' : RGB output enable OUT 11 RTS OUT UART(RS-232C) Request To Send signal output. OUT For EURO(SCART) connecter V/Y, R/C signal select 'L' : VRGB output = VRGB 'H' : VRGB output = YCGB 13 CTS IN UART(RS-232C) Clear To Send signal input. 14 VDD_2V5 − 2.5 V Power supply 15 VSS − Ground 16 FE_DATA IN Front-End L6315 stream interface. Searial data input. 17 FE_BCLK IN Front-End L6315 stream interface. Searial clock input. 18 FE_DVALID IN Front-End L6315 stream interface. Data valid flag input. 19 FE_SYNC IN Front-End L6315 stream interface. Searial synchronize flag input. 20 FE_EVALID IN Front-End L6315 stream interface. If STi5588 then RS-SPLIT error valid flag. 21 FE_ECCBST IN Front-End L6315 stream interface. If STi5588 then RS-SPLIT ECC Block Start flag. 22 TP- ( VQE_XCS ) OUT B Carousel 5 Disc Chenger only Tray rotete puls input. Capture function can be used. 10 V_SEL1 12 V_SEL2 A C D Reserved 23 VDD_RGB − RGB circuit 2.5 V Power supply 24 VSS_RGB − RGB circuit Ground 25 B_OUT OUT B / Cb 26 G_OUT OUT G/Y 27 RC_OUT OUT R / Cr 28 VREF_RGB IN RGB DAC reference 29 IREF_RGB IN RGB DAC electric current reference 30 VDD/YCC − YC circuit 2.5 V Power supply 31 VSS_YCC − YC circuit Ground 32 Y_OUT OUT Y 33 C_OUT OUT C 34 CV_OUT OUT CV 35 VREF_YC IN E YCC DAC reference F XV-EV51 5 6 7 109 8 1 No. A Pin Name 2 I/O IN YCC DAC electric current reference 37 VDD_2V5 − 2.5 V Power supply 38 VSS − Ground 39 XAMUTE2 OUT 40 MIC_XON1 OUT OUT 41 MIC_XON2 OUT 42 TP-x OUT OUT 43 CLAMP IN OUT 44 XUNCLAMP IN 45 KDSP_RST 46 44X48 D In case of NOT Karaoke model, this port is N.C.(output). Karaoke model Before MIC mixing stage audio muteing output 'L'. In case of NOT Karaoke model, this port is N.C.(output). Karaoke model MIC mixing chanel control output. In case of NOT Karaoke model, this port is N.C.(output). MIC_ON2 : MIC_ON1 : mode 0 0 : Don't use. 0 1 : Mix to Center Speaker 1 0 : Mix to main L/R channel 1 1 : OFF Reserved In case of NOT carusel 5 disc changer, this port is N.C.(output) Carousel 5 Disc Chenger only. 'H' show disc clampe complete postion. In case of NOT carusel 5 disc changer, this port is N.C.(output) Carousel 5 Disc Chenger only. 'H' show disc un-clampe complete postion. OUT Reserved OUT In case of NOT Karaoke model, this port is N.C.(output) Karaoke model KARAOKE-DSP master clock 1/2 mode 'L'. 47 VDD3V3 − 3.3 V Power supply 48 VDD_PCM − 2.5 V Power supply 49 VSS_PCM − Ground − Ground 50 VSS 4 Pin Function 36 IREF_YC B C 3 51 A_BCK OUT Audio DAC clock 52 A_DATA0 OUT Audio DAC Front L,R data 53 A_DATA1 OUT Audio DAC Center, LFE data 54 A_DATA2 OUT Audio DAC Surround L,R data 55 A_MCLK OUT Audio DAC Master clock 56 A_LRCK OUT Audio DAC L/R clock 57 DOUT OUT S/PDIF(IEC60958) digital audio output. OUT SMI SDRAM addresss 58 SMI_A4 59 SMI_A5 E 60 SMI_A6 61 SMI_A7 62 SMI_A8 63 SMI_A9 64 VDD_2V4 − 2.5 V Power supply F XV-EV51 110 1 2 3 4 5 No. Pin Name 6 I/O − 65 VSS 7 8 Pin Function Ground 66 SMI_A3 A 67 SMI_A2 68 SMI_A1 69 SMI_A0 OUT SMI SDRAM address 74 SMI_CS0 OUT SMI SDRAM chip select 75 SMI_CS1 OUT 2nd SMI SDRAM chip select 76 SMI_RAS OUT SMI SDRAM RAS 77 SMI_CAS OUT SMI SDRAM CAS 78 SMI_WE OUT SMI SDRAM Write Enable 79 SMI_DQML OUT SMI SDRAM Lower DQM 80 SMI_DQMU OUT SMI SDRAM Upper DQM 70 SMI_A10 71 SMI_A11 72 SMI_A12 73 SMI_A13 81 VDD_3V3 − 3.3 V Power supply 82 SMI_CLK IN SDRAM clock input. 83 VSS − Ground B 84 SMI_D0 C 85 SMI_D1 86 SMI_D2 87 SMI_D3 88 SMI_D4 I/O 89 SMI_D5 SMI SDRAM data 90 SMI_D6 91 SMI_D7 92 SMI_D8 93 SMI_D9 94 VDD_2V5 − 95 SMI_CLK OUT − 96 VSS D 2.5 V Power supply SDRAM clock output. Ground 97 SMI_D10 98 SMI_D11 99 SMI_D12 I/O 100 SMI_D13 SMI SDRAM data 101 SMI_D14 102 SMI_D15 103 KDSP_XCS OUT 104 KDSP_THRU OUT E In case of NOT Karaoke model, this port is N.C.(output). Karaoke model Exteranal DSP chip select 'L'. In case of NOT Karaoke model, this port is N.C.(output). Karaoke model Exteranal DSP through pass mode 'L'. F XV-EV51 5 6 7 111 8 1 No. A B C D Pin Name 2 I/O OUT Reserved for high-quality audio model's LFE control. 106 TP- OUT Not use. 107 VDD_3V3 − 3.3 V Power supply 108 VSS − Ground 109 TRST Diagnostic Controle Unit interface 110 TMS Diagnostic Controle Unit interface 111 TDTO Diagnostic Controle Unit interface 112 TDTI Diagnostic Controle Unit interface 113 TCK Diagnostic Controle Unit interface 114 ROTDRV OUT 115 B_F_ROM IN Carousel 5 disc changer model Tray rotation drive PWM output. Boot select 'L' : Boot from DCU. 'H' : Boot form ROM. 116 LOAD_DRV OUT Tray Open/Close drive PWM output (SINGL & CAROUSEL) 117 CPU_OE OUT 8M / 16M bits FLASH memory for firmware. 118 CPU_SDCK OUT 64M bits SDRAM for debugging firmware . 119 VDD_2V5 − 120 CLK27M IN Master 27MHz system clock input. 121 VSS − Ground 122 VDD_PLL − Clock PLL circuit 2.5 V Power supply 123 VSS_PLL − Clock PLL circuit Ground 124 RESET IN Power ON system RESET signal 'L' input. 125 DISC_SNS IN In case of NOT carusel 5 disc changer, this port is N.C.(input). Carousel 5 disc changer model Disc sense input. Pull up resistor is in another changer board. 126 FP_XRDY IN Front Panel interface. Hand-shake(request) input. 127 FE_INT IN 128 SD_DQML OUT 129 SD_DQMU OUT 2.5 V Power supply Front-End L6315 Interrupt request input. Flash memory write enable 'L'. Debug SDRAM Lower DQM. Debug SDRAM Upper DQM Debug SDRAM Read/~Write 131 CPU_WAIT OUT CPU wait 'H' input 132 CE3 OUT Flash memory Chip Eenable 'L' 133 − OUT TP-x 134 − OUT TP-x 135 SD_XRAS OUT 136 VDD_3V3 − 3.3V Vdd − GND OUT TP-x 137 VSS 138 − 4 Pin Function 105 LFEON 130 SD_RXW E 3 Debug SDRAM RAS 'L' 139 SD_XCAS OUT Debug SDRAM CAS 'L' 140 SD_XCS OUT Debug SDRAM Chip Select 'L' F XV-EV51 112 1 2 3 4 5 No. Pin Name 6 7 I/O 8 Pin Function 141 CPU_D0 142 CPU_D1 A 143 CPU_D2 144 CPU_D3 I/O 145 CPU_D4 FLASH, Debug SDRAM DATA 146 CPU_D5 147 CPU_D6 148 CPU_D7 149 VDD_2V5 − 2.5 V Power supply 150 VSS − Ground 151 CPU_D8 B 152 CPU_D9 153 CPU_D10 154 CPU_D11 I/O 155 CPU_D12 FLASH, Debug SDRAM DATA 156 CPU_D13 157 CPU_D14 158 CPU_D15 159 VDD_3V3 − 3.3 V Power supply 160 VSS − Ground C 161 CPU_A1 162 CPU_A2 163 CPU_A3 164 CPU_A4 165 CPU_A5 OUT 166 CPU_A6 FLASH, Debug SDRAM address 167 CPU_A7 168 CPU_A8 169 CPU_A9 D 170 CPU_A10 171 VDD_2V5 − 2.5 V Power supply 172 VSS − Ground 173 CPU_A11 174 CPU_A12 175 CPU_A13 176 CPU_A14 177 CPU_A15 178 CPU_A16 OUT FLASH, Debug SDRAM address E 179 CPU_A17 180 CPU_A18 181 CPU_A19 182 CPU_A20 183 CPU_A21 − 184 VDD_3V3 3.3 V Power supply F XV-EV51 5 6 7 113 8 1 No. Pin Name 186 XDRVMUTE 187 RS_ERROR 188 I2C_SEL OUT IN OUT Motor driver muting signal 'L'. Front-End L6315 stream interface. If STi5588 then ECC Error flag. Reserved (Front-End L6315 command interface.) ('L' : I2C bus connect to I2C_DMA) ('H' : I2C bus connect to I2C_COMAND) OUT Audio DAC serial control clock output. OUT Audio DAC serial control data output. 191 DAC_XCS0 OUT Audio DAC serial control chip select output. 192 DAC_XCS1 OUT OUT 194 SDA SDA 195 SCL SCL 196 FE_RST OUT 197 TXD TXD 198 VDD_2V5 Reserved (Audio DAC serial control chip select output. For addition DAC) In case of NOT 6ch audio output model, this port is N.C.(output). 6ch audio output model Audio quality up control signal output. Front-End L6315 command interface I2C bus serial data line. Front-End L6315 command interface I2C bus serial clock line. Front-End L6315 Hard reset output. UART(RS-232C) data output 2.5 V Power supply 199 VSS IN 200 RXD RXD 201 TP-x OUT Ground UART(RS-232C) data input Reserved − Diagnostic Controle Unit interface 203 TRIGOUT − Diagnostic Controle Unit interface 204 OPEN IN 'H' show tray loading "OPEN" complete position. 205 XCLOSE IN 202 TRIGIN D Pin Function 190 DAC_SO 193 6CH_MODE 206 FP_ACK OUT 207 FP_SCK OUT 208 FP_SI 4 Ground 189 DAC_SCK B C 3 I/O − 185 VSS A 2 IN 'H' show tray loading "CLOSE" complete position. Front Panel interface. Hand-shake (acknowledge) output. Front Panel interface. (Soft) Serial transfer clock output. Front Panel interface. (Soft) Serial transfer data input. E F XV-EV51 114 1 2 3 4 5 6 7 8 PCM1742KE (DVD IF ASSY : IC1921) • D/A Converter Pin Arrangement No. 1 2 A Pin Function BCK 16 SCK DATA 3 LRCK MC 14 4 DGND MD 13 5 VDD ZEROL/NA 12 6 VCC ZEROR/ZEROA 11 7 VOUTL VCOM 10 8 VOUTR AGND 9 I/O Pin Function BCK I Audio data bit clock input 2 DATA I Audio data digital input I L-channel and R-channel Audio data latch enable input 3 LRCK 4 DGND − Digital ground 5 VDD − Digital power supply +3.3V 6 VCC − Analog power supply +5V 7 VOUTL O Analog output for L-channel 8 VOUTR O Analog output for R-channel 9 AGND − Analog ground 10 VCOM − Common voltage decoupling 11 ZEROR/ZEROA O Zero flag output for R-channel / Zero flag output for L/R-channel 12 ZEROL/NA O Zero flag output for L-channel / No assign 13 MD I Mode control data input 14 MC I Mode control clock input 15 ML I Mode control latch input 16 SCK I System clock input 15 ML Pin Name 1 B C Block Diagram BCK 1 Audio Serial Port LRCK 3 7 VOUTL Output Amp and Low-pass Filter DAC DATA 2 4× / 8× Oversampling Digital Filter with Function Controller ML 15 Enhanced Multi-level Delta-Sigma Modulator Serial Control Port MC 14 D 10 VCOM Output Amp and Low-pass Filter DAC MD 13 8 VOUTR System Clock E Power Supply 5 9 6 8 VDD VCC AGND 11 DGND 12 ZEROR/ZEROA Zero Detect ZEROL/NA System Clock Manager SCK 16 F XV-EV51 5 6 7 115 8 1 2 3 4 MM1567AJ (DVD IF ASSY : IC1941) • DVD Video Amp. IC A Block Diagram B C Pin Function No. Pin Function No. Pin Name Pin Function VCC1 VCC 18 CrOUT Signal output (Cr) 2 CIN Crroma input 19 CrSAG SAG correction (Cr) 3 MUTE1 Mute select 20 GND2 GND 4 VIN Video input 21 CbOUT Signal output (Cb) 5 YC MIX YC MIX select 22 CbSAG SAG correction (Cb) 6 YIN Video input (Y) 23 GND2 GND 7 BIAS Bias 24 CYOUT Signal output (CY) 8 GND1 GND 25 CYSAG SAG correction (CY) 9 NC NC 26 GND2 GND 10 GND1 GND 27 YOUT Signal output (Y) 11 NC NC 28 YSAG SAG correction (Y) 12 CYIN Luminance input 29 GND2 GND 13 CLP Input clamp select 30 VOUT Signal output (V) 14 CbIN Component input (Cb) 31 VSAG SAG correction (V) 15 MUTE2 Mute select 32 GND2 GND 16 CrIN Component input (Cr) 33 COUT Chromatic output 17 GND2 GND 34 VCC2 VCC D E Pin Name 1 F XV-EV51 116 1 2 3 4 5 6 7 8 PDC093 (IF ASSY : IC5501) A • System Control Microcomputer Pin Function No. 1 Port Name PA3/WR# Pin Name I/O DVD ON/OFF O Function Control power supply for DVD 2 PA4/RD# (HPDET) O Detect to insert headphone (reserve) → If don't use, set I/O to output 3 PA5/RS XCDRST O Reset for CD / VCD / DVD microcomputer 4 P70 / INT0 / T0LCP / AN8 ACPULSE I AC PULSE input 5 P71 / INT1 / T0HCP / AN9 CDERR I ERR and OVER input from CODEC 6 P72 / INT2 / T0IN RDSCLK I Clock input from RDS decoder (without RDS : Low output) 7 P73 / INT3 / T0IN REMOCON I REMOCON signal input 8 RES# XRESET I Reset input B 9 XT1 / AN10 − − 10 XT2 / AN11 − − 11 VSS1 − − 12 CF1 − − 13 CF2 − − 14 VDD1 − − Power supply 15 P80 / AN0 SIMUKE I Destination setting input 16 P81 / AN1 LEVELIN I Level meter signal input 17 P82 / AN2 3.3DETECT I DVD 3.3V detection input 18 P83 / AN3 KEY4 I Key input (for AMP) 19 P84 / AN4 ST/TUNE I STEREO tuned detection input 20 P85 / AN5 KEY1 I Key input 21 P86 / AN6 KEY2 I Key input 22 P87 / AN7 KEY3 I Key input 23 P10/SO0 SYS_DOUT O System bus data output (AMP side output) 24 P11 / SI0 / SB0 SYS_DIN I System bus data input (AMP side input) 25 P12 / SCK0 SYS_CLK I C System bus clock input Data output for CODEC + DIR IC, TC9164, EXPAND IC (only for DSP), CRISTAL's DSP (AMP side output) [DSP core CDDI + CSDI] Data input for CODEC + DIR IC, TC9164, EXPAND IC (only for DSP), CRISTAL's DSP AMP side input) [DSP core CDDO + CSDO] Clock for CODEC + DIR IC, TC9164, EXPAND IC (only for DSP), CRISTAL's DSP [DSP core CDCK + CSCK] 26 P13 / SO1 DSPDIN O 27 P14 / SI1 / SB1 DSPDOUT I 28 P15 / SCK1 DSPCLK O 29 P16/T1PWML SYS_CS2 O 30 P17/T1PWMH/BUZ SYS_CS1 O Chip select 1 for system bus 31 PE0 TCEXPOE O Output enable to EXPAND IC for deck 32 PE1 TCEXPCLK O Clock to EXPAND IC for deck 33 PE2 TCEXPCE O Chip enable to EXPAND IC for deck 34 PE3 TCEXPDAT O Data to EXPAND IC for deck 35 PE4 TCHALF I Input switch of mecha half 36 PE5 TCMODE I Input switch of mecha mode 37 PE6 TCRECF I Input switch of mecha during recording forward 38 PE7 TCRECR I Input switch of mecha during recording reverse 39 VSS4 − − Ground 40 VDD4 − − Power supply D Chip select 2 for system bus E F XV-EV51 5 6 7 117 8 1 No. A B C D 2 Port Name Pin Name 3 I/O I 4 Function 41 PF0 TCMSIN Input MS signal 42 PF1 TCPULSE I Input pulse of TC reel 43 PF2 XTESTMODE I Set TEST MODE for product line (service) and unit checker 44 PF3 SERVICE I Set SELF CHECK for service 45 PF4 DTSDMIX O Cntrol of gain-up for dts down-mix 46 PF5 SWFMIX O Control for subwoofer mix 47 PF6 ECHCNT1 O Control of echo level 1 48 PF7 ECHCNT2 O Control of echo level 2 49 SI2P0/SO2 LCDDAT O Data for FL (LCD) driver 50 SI2P1/SI2/SB2 LCDCE O Chip enable for FL (LCD) driver 51 SI2P2/SCK2 LCDCLK O Clock for FL (LCD) driver 52 SI2P3/SCK20 LCDRST O Reset for FL (LCD) driver 53 PWM1 − − 54 PWM0 − − 55 VDD2 − − Power supply 56 VSS2 − − Ground 57 P00 TXCE O Chip enable for tuner LSI 58 P01 NC O No connection 59 P02 XTMRLED O Control timer standby LED 60 P03 XSTBYLED O Control standby LED 61 P04 TXCLK O Clock for tuner LSI 62 P05 TXIDAT O Data for tuner LSI 63 P06 TXMUTE O Control mute of tuner 64 P07 RDSPOW O Control power supply of RDS 65 P20/INT4/T1IN RDSDATA I Input RDS data 66 P21/INT4/T1IN TXODAT I Input data from tuner LSI 67 P22/INT4/T1IN XDSPMUTE O Control mute of DSP (board) 68 P23/INT4/T1IN A/D MODE O DSP mute when ANALOG 69 P24/INT5/T1IN AUXMUTE O Control mute of AUX output 70 P25/INT5/T1IN DVDLAT I Input latch signal from DVD connection 71 P26/INT5/T1IN ATTCONT O Control ATT of AUX 72 P27/INT5/T1IN KCONSTB O Strobe for Key Control IC 73 P30 KCONCLK O Clock for Key Control IC 74 P31 KCONDATA O Data for Key Control IC 75 P32 VOCALC O 76 P33 VOCALB O 77 P34 VOCALA O 78 P35 ASSELB O Audio source select B 79 P36 ASSELA O Audio source select A (CD, TUNER, TAPE, AUX) BU4052 80 PB7/D7 DSP EXP CS O Chip select for EXPAND E F XV-EV51 118 1 2 3 4 5 No. 6 Port Name Pin Name 7 I/O 8 Function 81 PB6/D6 DSP EXP OE O Output enable for EXPAND (no use) 82 PB5/D5 CSCS O Chip select for CRISTAL's DSP 83 PB4/D4 CSREQ I Request for CRISTAL's DSP 84 PB3/D3 FS96 I 96k input fron CODEC 85 PB2/D2 ABOOT O Chip select for SRAM / P2ROM 86 PB1/D1 CSRST O RESET for CRISTAL's DSP 87 PB0/D0 CDCS O Chip select for CODEC 88 VSS3 − − Ground 89 VDD3 − − Power supply 90 PC7/A7 CDPDN O Power down (RESET) for CODEC 91 PC6/A6 SYSPOW O Control power supply of system 92 PC5/A5 PROTECT I Protection and Fan Error detection input 93 PC4/A4 SPCONT O Control relay of speaker output 94 PC3/A3 SYSMUTE O Control mute of system 95 PC2/A2 VOLCE O Chip enable for E-vol IC 96 PC1/A1 VOLCLK O Clock for E-vol IC 97 PC0/A0 VOLDATA O Data for E-vol IC 98 PA0/CS2# FLASH E/D − for FLASH writing 99 PA1/CS1# FLASH DO − for FLASH writing FLASH CLK − for FLASH writing 100 PA2/CS0# A B • Port 0 (P00-P07) can be selected for input or output by each 4 bits (P00-P03, P04-P07). Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option. • Port 1 (P10-P17) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1bit in option. • Port 2 (P20-P27) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option. • Port 3 (P30-P36) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option. • Port 7 (P70-P73) can be selected for input or output by each 1 bit. Set for input when reset. • Port 8 (P80-P87) can be selected for input or output by each 1 bit. Set for input when reset. • Port A (PA0-PA5) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option. • Port B (PB0-PB7) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option. • Port C (PC0-PC7) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit in option. • Port E and PortF can be selected for input or output by each 2 bits. • In case of without RDS, it is best that RDSDATA and RDSCLK are assigned as I/O port which can be set output and output low level. • Port 0 cannot output High level during HALT mode. C D E F XV-EV51 5 6 7 119 8 1 2 3 4 7.3 CLEANING A Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools: Position to be cleaned Cleaning tools Pickup lenses Cleaning liquid : GEM1004 Cleaning paper : GED-008 B C D E F XV-EV51 120 1 2 3 4 5 6 7 8 8. PANEL FACILITIES A Front panel 6 7 8 9 The front panel controls for the EV51DVD model are shown in the illustrations below. 10 11 12 13 STEREODVD TUNER DECK EV51DVD 1 SURROUND (EV51DVD model) Selects a surround listening mode SFC (EV21DVD model) Selects sound modes or custom settings from the Sound Field Control B SOUND MODE 2 STANDBY/ON TIMER/CL OCK ADJ KARAOKE Switches the player on or into standby DISPLA Y ST. MEMORY ENTER 3 ADVANCED SURROUND (EV51DVD model) Selects an advanced listening mode CENTER SP (ON/OFF) (EV21DVD model) DVD/CD Switches the center speaker on or off 4/1 TUNING– – + VOLUME PLAY/PAUSE STTOP TUNER TAPE ¡/¢ UNING+ LINE C OPEN/CL OSE 1 2 3 4 5 REVERSE MODE DOLBY NR(DEMO) REC/ST OP ASES MIC VOL MIN MAX D MIC (MAIN) STANDBY/ON MIC (SUB) SURROUND ADVANCED SURROUND POWER AMPLIFIER EV51D VD STANDBY 14 15 16 17 18 19 20 21 E PHONES F XV-EV51 5 6 7 121 8 1 2 3 4 A 4 STANDBY indicator 14 ASES Lights when the system is in standby Press for CD-to-tape synchro recording 5 PHONES jack 15 DOLBY NR (DEMO) Headphone jack Switches Dolby Noise Reduction on or off 6 DVD/CD and TUNER select button Press to select the source you want to listen to 16 OPEN/CLOSE 7 SOUND MODE Opens the disc tray Adjusts the tone, balance and (EV51DVD model only ) DSP controls B 17 MIC VOL Controls the volume of the karaoke mics 8 KARAOKE (EV51DVD model) 18 MIC input jacks Selects audio channels for karaoke 19 VOLUME, TUNING and playback control buttons VIRTUAL SURROUND (EV21DVD model) Switches the Virtual Surround effect on or off 9 The TUNING /scan/skip buttons are used for tuning into stations, skipping or scanning tracks on discs or tapes. The playback control button is used for playing, pausing and stopping playback. ST. MEMORY Use for saving and listening to station presets 20 REVERSE MODE Selects the playback mode for tapes 10 ENTER C Select an option or execute a command 21 REC/STOP Starts/stops recording on the tape deck 11 DISPLAY Changes the information shown in the display 12 TIMER/CLOCK ADJ Use for setting the clock, as well as for setting and checking the timers 13 TAPE and LINE select button Press to select the source you want to listen to D E F XV-EV51 122 1 2 3 4 5 6 7 8 A Controls and displays 1 Remote control STANDBY/ON Switches the player on or into standby 2 Function select buttons Selects the source you want to listenot The remote control for the EV51DVD model s i shown in the illustration below . 3 DVD control buttons AUDIO Selects the audio channel or language SUBTITLE Selects a subtitle display STANDBY/ON 1 2 3 4 5 DVD/CD TAPE FM/AM LINE AUDIO SUBTITLE ANGLE ZOOM ANGLE Changes the camera angle during DVD multiangle scene playback DVD DISP DSP SURROUNDADVANCED MONO SYSTEM DISP I — KEYCON — i KARAOKE ECHO TIMER 13 MUTE 15 CLOCK ADJ. 6 VOLUME SYSTEM SETUP ST – ADV. SURROUND Selects a DSP mode for multi-channel sound RETURN TUNE – 18 E/ 33 ¡ 3 1 FOLDER – PROGRAM C ST + /e 4 DSP buttons (EV51DVD model) SURROUND Selects a surround mode for multi-channel sound ENTER 9 11 4 16 DVD MENU SOUND MODE 10 14 17 TUNE + DVD SETUP 8 ZOOM Changes the zoom level TOP MENU 7 B Sound Field buttons (EV21DVD model ) FOLDER + SFC Selects sound modes or custom settings from the Sound Field Control ¢ 7 8 REPEAT RANDOM 1 2 3 TEST TONE CH LEVEL SLEEP 4 5 6 ENTER 7 8 9 0 CLEAR D VIRTL. SURR. Switches the Virtual Surround effect on or off TV CONTROL 12 SHIFT 5 19 INPUT CHANNEL VOLUME SELECT KARAOKE buttons KARAOKE Selects audio channels for karaoke ECHO Changes the echo level on the karaoke mics KEYCON (SHIFT+KARAOKE/ECHO) Lowers/raises the pitch of the backing track E F XV-EV51 5 6 7 123 8 1 2 3 Controls and displays 6 A CH LEVEL (SHIFT+5) Press to adjust the speaker level SLEEP (SHIFT+6) Switches the sleep timer on or off VOLUME Adjusts the volume level 7 DVD SETUP CLEAR Clears an entry Press to make DVD settings SYSTEM SETUP (SHIFT+DVD SETUP) (EV51DVD model) ENTER Selects menu options, etc. (works exactly the same as the ENTER button in 8 above) Press to make DSP settings 12 SHIFT 8 ENTER, TUNE & cursor control buttons Navigates on-screen displays and menus. ENTER selects an option or executes a command. 9 B 4 Press to access the functions/commands written in green on the remote 13 SYSTEM DISP SOUND MODE Switches between information and clock displays Adjusts the tone, balance and (EV51DVD model only ) DSP controls DVD DISP (SHIFT+SYSTEM DISP) Changes the information shown in the display 10 Playback controls 3 Starts/resumes playback 14 MONO Press to listen to a stereo FM broadcast in mono (sound quality is usually improved) 1 and /e Use for reverse slow motion playback, frame reverse and reverse scanning CENTER SP (SHIFT+MONO) (EV21DVD model only) Switches the center speaker on or off ¡ and E/ Use for forward slow motion playback, frame advance and forward scanning C 15 MUTE Mutes the volume 16 TIMER/CLOCK ADJ. 4 Jumps to the beginning of the current chapter or track, then to previous chapters/tracks ¢ Use for setting the clock, as well as for setting and checking the timers 17 Jumps to the next chapter or track 8 Pauses playback; press again to restart 7 Stops playback TOP MENU (SHIFT+DVD MENU) Displays the top menu of a DVD disc 11 Number buttons and SHIFT functions The number buttons can be used for selecting tracks directly, the functions above the buttons are accessed by pressing SHIFT at the same time as the button. D PROGRAM (SHIFT+1) Use to program/play a program list 18 RETURN Press to return to a previous menu screen 19 TV CONTROL Refer to Setting the remote to control your TV on page 27 to use these controls with your TV. REPEAT (SHIFT+2) Selects a repeat play mode Switches the TV on or into standby RANDOM (SHIFT+3) Selects a random play mode INPUT SELECT Switches the TV input CHANNEL +/– Selects channels VOLUME +/ – Adjusts the volume on the TV TEST TONE (SHIFT+4) (EV51DVD model only) Outputs the test tone for speaker setup (EV51DVD model only) E DVD MENU Displays the DVD menu (for CDs, Video CDs, and MP3 discs, the Disc Navigator screen appears) F XV-EV51 124 1 2 3 4 5 6 7 8 Controls and displays A 6 Display MP3 Lights during playback of an MP3 disc 7 RPT-1 RPTlights during repeat play ( RPT-1 lights during repeat one-track play) The front panel display for the EV51DVD model is shown in the illustration below . 8 Format indicator (EV51DVD model only) These indicators will light according to which channels are encoded on the Dolby Digital or DTS multi-channel disc currently in the player. LFE lights when the disc has an LFE channel. 1 2 3 4 5 PGM RDMF PT-1 ADV.SURR. SFC MP3 6 14 13 12 MONO STEREO TUNED 96kHz 7 8 9 B MONO Lights when FM mono reception is selected 10 STEREO Lights when a stereo FM broadcast is being received in auto stereo mode 9 10 11 11 96 kHz Lights when a 96kHz source is detected (wont light if the source is copy-protected) 15 12 SUB Wf Lights during multi-angle scenes on a DVD disc C 13 Lights when Virtual Surround is switched on 14 TUNED Lights when a broadcast is being received 2 PRO LOGIC 2 DIGITAL 16 20 19 18 Shows the level of the source selected 17 16 Speaker and playback indicators 21 22 23 24 B. CUT REC ECHO KEY KARAOKE L R The speaker indicators ( ) show the speakers currently active. The playback indicator (3) lights during playback. 25 26 2 NR 27 28 15 Level meter ASES WAKE – UP 29 1 Character display 2 RDM REC 17 2 DIGITAL 30 31 32 This lights to indicate decoding of a Dolby Digital signal 18 DTS This lights to indicate decoding of a DTS signal 19 2 PRO LOGIC II (EV51DVD model only) This lights to indicate Prologic II decoding Lights during random playback 3 D PGM 20 2 NR Lights during program play Lights when Dolby Noise Reduction is on E 4 ADV. SURR. (EV51DVD model only) Lights when one of the Advanced Surround listening modes is selected 5 SFC (EV21DVD model only) Lights when one of the Sound Field Control listening modes is selected F XV-EV51 5 6 7 125 8 1 2 3 4 A Controls and displays 19 2 PRO LOGIC II (EV51DVD model only) 25 ASES This lights to indicate Prologic II decoding Lights during ASES recording 20 2 NR 26 Lights when Dolby Noise Reduction is on B Lights when the sleep timer is active 21 B.CUT 27 ECHO Lights when the beat cut mode has been switched to B.CUT2 Lights when the Karaoke ECHO effect is selected 28 KEY 22 REC Lights when the Karaoke pitch control is selected Lights when recording to the tape deck 29 KARAOKE LR 23 2 3 Lights when one of the Karaoke modes is selected: Indicates the direction of tape playback • KARAOKE (Vocal cancel) - Vocals in the backing track are partially eliminated using EQ. 24 Indicates the reverse mode: • • - Auto-reverse playback: stops after finishing playback in the reverse (2) direction • - Continuous playback (up to 16 complete plays) C • L - Left channel only. Use for tracks that have a vocal recorded in the right channel. - Single side playback • R - Right channel only. Use for tracks that have a vocal recorded in the left channel. • L R - Use to put a a single-channel vocal track into the center of the mix. 30 WAKE-UP Lights in standby when the wake-up timer is set and flashes when the wake-up timer activates 31 Lights in standby when either timer is set and flashes when they activate 32 REC D Lights in standby when the record timer is set and flashes when the timer starts recording E F XV-EV51 126 1 2 3 4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Producer : Acrobat Distiller 4.0 for Macintosh Author : PMC Title : RRV2636 Creator : FrameMaker 6.0 Modify Date : 2002:07:24 10:41:09+09:00 Create Date : 2002:07:04 18:03:59 Subject : Linked Page Count : 126 Page Mode : UseNone Page Layout : SinglePageEXIF Metadata provided by EXIF.tools