DG240 Ap295

User Manual: DG240

Open the PDF directly: View PDF PDF.
Page Count: 16

DownloadDG240 Ap295
Open PDF In BrowserView PDF
pub

T

lica o o
tio
rd
see ns in er
bac thi
k p s in
age dex

INDEX TO BRE DIGESTS, GUIDES
and INFORMATION PAPERS
January 2013
This leaflet provides a classified subject index to BRE Digests, Good Building Guides, Good Repair Guides
and Information Papers. It also includes numerical listings of titles in each series. The publications are
available on subscription through BRE Connect and BRE Connect Online and individual copies can be
ordered from IHS BRE Press, Willoughby Road, Bracknell, RG12 8FB, 01344 328038, brepress@ihs.com,
or online at www.brebookshop.com.
Subscribers to BRE Connect Online receive all new leaflets published each month in pdf format, and have
access to the complete catalogue of BRE reports and guides, and many other discounts and benefits.

Digests

Good Building Guides

Digests are authoritative summaries of the state of the art on
specific topics in construction design and technology. They
draw on BRE’s expertise in these areas and provide essential
support for all involved in design, specification, construction and
maintenance.

Good Building Guides give construction professionals concise
guidance on the principles and practicalities for achieving goodquality building.

Good Repair Guides

Information Papers

Good Repair Guides deal with the defects most commonly
encountered in buildings and offer sound advice on putting them right.

Information Papers summarise recent BRE research findings, and
give advice on how to apply this information in practice.

Index – january 2013

2

Subject index

SUBJECT INDEX

Building elements and structures
Doors, windows, glazing and cladding
Floors, flooring and stairs
Masonry, walls and chimneys
Roofs and roofing
Soils, ground investigation and foundations

2
2
2
3
3

Design and management
Building design
Procurement, maintenance, site organisation
and waste management

3
4

Environment and services
Air quality, radon and ventilation
Condensation and dampness
Electrical, lighting, acoustics and control systems
Energy, insulation and air conditioning
Sustainability and green issues
Water supply, drainage and sanitation
Wind, floods and climate

4
5
5
5
6
6
6

Fire and security

6

Materials
Bricks, mortar, render, plaster and stone
Composites, metals, paints, adhesives and sealants
Concrete
Timber

Listings
Good Repair Guides
Good Building Guides
Pollution Control Guides
In-situ Ground Testing Guides
Digests
Special Digests
Information Papers
ORDER FORM

7
7
8
8

9
9
10
11
11
13
13
16

prices

For current price information, please
visit www.brebookshop.com
UPDATING
IHS BRE Press produces regular catalogues of new and best-selling titles, and
email newsletters about new publications. Pdfs of most of our titles can be
downloaded from www.brebookshop.com.
To receive our regular email publications update, please contact
brepress@ihs.com.

BRE Connect subscribers
To claim your subscriber discount (plus your extra 10% discount before 31st
May 2013), quote: AP295, then order via email, phone, fax or post. (We are
unable to apply subscriber discount online).

How to order
• t: +44 (0)1344 328038
• f: +44 (0)1344 328005
• e: brepress@ihs.com
• www.brebookshop.com
• for current prices visit
our website

This index lists all BRE Digests, Good Building Guides and Good Repair
Guides in print, and Information Papers published from 2001, grouped
under 19 subject headings.

BUILDING ELEMENTS AND STRUCTURES
Doors, windows, glazing and cladding

Double glazing for heat and sound insulation DG379 1993
Factory glazed windows 2005
Part 1. Introduction and the glazing
process DG497/1
Part 2. Transport, storage and
installation DG497/2
Hot air repair of PVC-U profiles IP12/01 2001
Hot air repair of PVC-U window and door frames GR31 2001
Impact standards for glass IP1/05 2005
Installing domestic automatic door controls GG48 2001
Installing domestic automatic window controls GG49 2001
Insulated external cladding systems GG31 1999
Insulating glazing units DG453 2000
Level external thresholds: reducing moisture penetration and thermal
bridging GG47 2001
Metal cladding: assessing the thermal performance of built-up systems
which use ‘Z’ spacers IP10/02 2002
Plastics external glazing DG430 1998
PVC-U windows DG404 1995
Reinforced plastics cladding panels DG161 1974
Repairing or replacing lintels GG1 1992
Repairing timber windows 1997
Part 1. Investigating defects and dealing with water leakage GR10/1
Part 2. Dealing with draughty windows, condensation in sealed units,
operating problems, and deterioration of frames GR10/2
Selecting windows by performance DG377 1992
Wall cladding defects and their diagnosis DG217 1977
Wall cladding: designing to minimise defects due to inaccuracies and
movements DG223 1979
Weathering of white external PVC-U DG440 1999
Whole life performance of domestic automatic window controls IP3/02
2002

Floors, flooring and stairs

Domestic floors: repairing or replacing floors and flooring 1997
Part 1. Construction, insulation and
damp-proofing GG28/1
Part 2. Concrete floors, screeds and
finishes GG28/2
Part 3. Timber floors and decks
GG28/3
Part 4. Magnesite, tiles, slabs and
screeds GG28/4
Part 5. Wood blocks and suspended
timber GG28/5
Flooring, paving and setts – requirements for safety in use IP10/00 2000
Heat losses through ground floors DG145 1972
Increasing the fire resistance of existing timber floors DG208 1988
Industrial platform floors: mezzanine and raised storage DG437 1999
Insulating ground floors GG45 2001
Joist hangers GG21 1996
Proprietary nosings for non-domestic stairs IP15/03 2003
Repairing and replacing ground floors GR17 1998
Safer floors: guidance on specifying flooring for internal and external
safety in domestic buildings IP10/07 2007

Masonry, walls and chimneys

AAC ‘aircrete’ blocks and masonry 2002
Part 1. DG468/1
Part 2. DG468/2
Aircrete: thin joint mortar systems DG432 1998
Aircrete tongue and grooved block masonry IP7/05 2005
Building brickwork or blockwork retaining walls GG27 1996
Building damp-free cavity walls GG33 1999
Building reinforced, diaphragm and wide plan freestanding walls GG19
1994
Building simple plan brick or blockwork freestanding walls GG14 1994
Cleaning exterior masonry 2000
Part 1. Developing and implementing a strategy DG449/1
Part 2. Methods and materials DG449/2

Index – January 2013
Cleaning external walls of buildings 2000
Part 1. Cleaning methods GR27/1
Part 2. Removing dirt and stains GR27/2
Corrosion of metal components in walls DG461 2001
Domestic chimneys for solid fuel – flue design and installation GG46 2001
Dynamic stiffness of wall ties used in masonry cavity walls: measurement
procedure IP3/01 2001
Earth, clay and chalk walls: inspection and repair methods GR35 2006
Freestanding brick walls – repairs to copings and cappings GG17 1993
Installing wall ties GG41 2000
Installing wall ties in existing construction DG329 2000
Insulating masonry cavity walls 2001
Part 1. Techniques and materials GG44/1
Part 2. Principal risks and guidance GG44/2
Insulating solid masonry walls GG50 2002
Masonry and concrete structures: measuring in-situ stress and elasticity
using flat jacks DG409 1995
Measuring the compressive strength of masonry materials: the screw pullout test DG421 1997
Principles of masonry conservation management DG502 2007
Providing temporary support during work on openings in external walls
GG15 1992
Removing internal loadbearing walls in older dwellings GG20 1999
Repairing brick and block freestanding walls GR28 2000
Repairing brick and block masonry DG359 1991
Repairing chimneys and parapets GR15 1998
Repairing damage to brick and block walls GR3 1996
Replacing masonry wall ties GR4 1996
Replacing wall ties DG401 1995
Repointing external brickwork walls GR24 1999
Retro-installation of bed joint reinforcement in masonry GG62 2004
Supporting temporary openings GR25 1999
Surveying brick or blockwork freestanding walls GG13 1992
Surveying masonry chimneys for repair or rebuilding GG2 1990
Temporary support for openings in external walls: assessing load GG10
1991
Testing bond strength of masonry DG360 1991
Thin layer mortar masonry GG58 2003
Ties for masonry walls: a decade of development IP11/00 2000
Untied cavity party walls: structural performance when using AAC
blockwork IP1/99 1999

Roofs and roofing

Bracing trussed rafter roofs GG8 1991
Building a new felted flat roof GG36 1999
Cool roofs and their application in the UK IP13/10 2010
Designing roofs for climate change: modifications to good practice
guidance DG499 2006
Designing roofs with safety in mind IP7/04 2004
Erecting, fixing and strapping trussed rafter roofs GG16 1993
Flat roof design
Part 1. Bituminous roofing
membranes DG419 1996
Part 2. The technical options DG312 1986
Part 3. Thermal insulation DG324 1987
Flat roofs: assessing and making roof repairs
Part 1.	Assessing bitumen felt and mastic asphalt roofs for repair
GR16/1 1998
Part 2. Making repairs to bitumen felt and mastic asphalt roofs
GR16/2 1988
Insulated profiled metal roofs GG43 2000
Insulating roofs at rafter level: sarking insulation GG37 2000
Loft conversion
Part 1. Structural considerations GG69/1 2006
Part 2. Safety, insulation and services GG69/2 2006
Re-covering old timber roofs DG351 1990
Re-covering pitched roofs GR14 1998
Roof loads due to local drifting of snow DG439 1999
Safety considerations in designing roofs DG493 2005
Site-cut pitched timber roofs
Part 1. Design GG52/1 2002
Part 2. Construction GG52/2 2002
Slate and tile roofs: avoiding damage from aircraft wake vortices DG467
2002
Stability under wind load of loose-laid external roof insulation boards
DG295 1985
Structural appraisal of buildings with long-span roofs DG282 1984
Swimming pool roofs: minimising the risk of condensation using warmdeck roofing DG336 1988

3

Tiling and slating pitched roofs
Part 1. Design criteria, underlays and battens GG64/1 2005
Part 2. Plain and profiled clay and concrete tiles GG64/2 2005
Part 3.	Natural and manmade slates GG64/3 2005
Ventilated and unventilated cold pitched roofs GG51 2002
Ventilating thatched roofs GG32 1999

Soils, ground investigation and foundations

A simple guide to in-situ ground testing 2003
Part 1. What is it and why do it? IS1
Part 2. Cone penetration testing IS2
Part 3. Flat dilatometer testing IS3
Part 4. Dynamic probing IS4
Part 5. Pressuremeter testing IS5
Part 6. Large-diameter plate loading
tests IS6
Part 7. Geophysical testing IS7
Assessment of damage in low-rise buildings DG251 1995
Basement construction and waterproofing 2007
Part 1. Site investigation and preparation GG72/1
Part 2. Construction, safety, insulation and services GG72/2
Building on brownfield sites
Part 1. Identifying the hazards GG59/1 2003
Part 2. Building on brownfield sites: reducing the risks GG59/2 2004
Contaminated land: ingress of organic vapours into buildings DG482 2004
Cracks caused by foundation movement GR1 1996
Damage to buildings caused by trees GR2 1996
Desiccation in clay soils DG412 1996
Development of sites containing expansive ferrous slags IP8/05 2005
Foundations for low-rise building extensions GG53 2002
Hardcore for supporting ground floors of buildings 2011
Part 1. Selecting and specifying materials DG522/1
Part 2. Placing hardcore and the legacy of problem materials
DG522/2
Low-rise building foundations on soft ground DG471 2002
Low-rise building foundations: the influence of trees in clay soils DG298
1999
Low-rise buildings on fill
Part 1. Classification and load-carrying characteristics DG427/1 1997
Part 2. Site investigation, ground movement and foundation design
DG427/2 1998
Part 3. Engineered fill DG427/3 1998
Low-rise buildings on shrinkable clay soils 1993
Part 1. DG240
Part 2. DG241
Monitoring building and ground movement by precise levelling DG386
1993
Optimising ground investigation DG472 2002
Pfa grouts for stabilising mine workings IP10/06 2006
Principal drivers for reusing foundations IP5/07 2007
Pruning trees to reduce water use: summaries of research; conclusions and
recommendations IP7/06 2006
Simple foundations for low-rise housing
Part 1. Site investigation GG39/1 2000
Part 2. ‘Rule of thumb’ design GG39/2 2001
Part 3. Groundworks: getting it right GG39/3 2002
Site investigation for low-rise building
Part 1. Desk studies DG318 1987
Part 2. Procurement DG322 1987
Part 3. Soil description DG383 1993
Part 4. The walk-over survey DG348 1989
Part 5. Trial pits DG381 1993
Part 6. Direct investigations DG411 1995
Simple measuring and monitoring of movement in low-rise buildings 1989
Part 1. Cracks DG343
Part 2. Settlement, heave and out-of-plumb DG344
Slurry trench cut-off walls to contain contamination DG395 1994
Soakaway design DG365 1991
Sustainability in foundations IP11/10 2010
Tilt of low-rise buildings with particular reference to progressive
foundation movement DG475 2003
Timber piles and foundations DG479 2003
Underpinning DG352 1993

DESIGN AND MANAGEMENT
Building design

Access to buildings DG505 2008
An introduction to building with Structural Insulated Panels (SIPs) IP13/04
2004
An introduction to structural dynamic comfort criteria IP21/12 2012

4

Index – january 2013

Applying the code for sustainable homes on the BRE Innovation Park
(4-part set) 2008
Part 1. Lessons learnt about building
fabric IP9/08/1
Part 2. Lessons learnt about energy
sources, overheating and
ventilation IP9/08/2
Part 3. Lessons learnt about water
use, harvesting, recycling and
drainage IP9/08/3
Part 4. Lessons learnt about
architecture, construction and
material sourcing IP9/08/4
Bats and refurbishment GR36 2009
Bird, bee and plant damage to buildings DG418 1996
Building performance feedback: getting started DG478 2003
Building without cold spots GG35 1999
Common defects in low-rise traditional housing DG268 1982
Connecting walls and floors 1997
Part 1.	A practical guide GG29/1
Part 2. Design and performance GG29/2
Consumer feedback on low-carbon housing IP14/10 2010
Control of lichens, moulds and similar growths DG370 1992
Damage to structures from ground-borne vibration DG403 1995
Delivering a successful demonstration project IP20/10 2010
Flood-resilient building) 2012
Part 1. Legislation, planning, flood risk assessment and performance
of buildings DG523/1
Part 2. Building in flood-risk areas and designing flood-resilient 		
buildings DG523/2
Habitability guidelines for existing housing GG9 1991
Helping visually impaired people in their homes: assistive technology
IP8/03 2003
Lessons learned from the Barratt Green House IP3/09 2009
Loads generated by jumping crowds: experimental assessment
IP4/02 2002
Masonry walls and beam-and-block floors U-values and building
regulations SD4:2007
Modern methods of construction (MMC) in housing 2007
Part 1. Drivers and barriers to their use IP3/07/1
Part 2. Planning for manufactured housing IP3/07/2
Part 3. Designing for manufacture IP3/07/3
Part 4. Successful development and manufacture of MMC products
IP3/07/4
Naturally innovative: using biomimetics in construction IP11/07 2007
New build and refurbishment in the sustainable communities plan IP2/08
2008
Outline guide to assessment of traditional housing for rehabilitation GG6
1990
Permanent cantilever grandstands: dynamic response IP5/00 2000
Prefabricated housing in the UK 2001
Part 1.	A case study – Murray Grove, Hackney IP16/01/1
Part 2.	A case study – CASPAR II, Leeds IP16/01/2
Part 3.	A summary paper IP16/01/3
Prefabricated relocatable extensions: evaluating their use for people with
disabilities IP7/07 2007
Quantifying the cost of poor housing IP16/10 2010
Refurbishing Victorian housing IP9/06 2006
Retractable grandstands: dynamic response IP4/00 2000
Reducing the risk of pest infestations in buildings DG415 1996
Relocatable buildings: structural design, construction and maintenance
DG374 2002
Static load testing: concrete floor and roof structures within buildings
DG402 1995
Structural assessment of existing large panel system (LPS) dwelling blocks
for accidental loads DG526 2012
Structural appraisal of existing buildings, including for a material change of
use DG366 2012
Structural composite connections for sequential seismic and fire
performance IP2/09 2009
Structural design in architecture DG12 1960
Supplementary guidance for assessment of timber-framed houses 1993
Part 1. Examination GG11
Part 2. Interpretation GG12
Sustainable housing refurbishment IP18/10 2010
Sustainable refurbishment of non-traditional housing and pre-1920s solid
wall housing IP3/10 2010
Sustainable refurbishment of the BRE Victorian Terrace 2011
Part 1. Design philosophy IP12/11/1
Part 2. The construction process IP12/11/2
Temporary demountable grandstands: dynamic response IP3/00 2000
The response of structures to dynamic crowd loads DG426 2004

Timber frame dwellings. Conservation of fuel and power: AD L1A
guidelines SD2:2006
U-values for light steel-frame construction DG465 2002
Why do buildings crack? DG361 1991

Procurement, maintenance, site organisation and waste
management
Achieving cost effective responsive maintenance IP14/05 2005
A guide to certification and approval for engineers and designers IP5/08
2008
Balanced Value for sustainable procurement IP6/06 2006
Better building – integrating the supply chain: a guide for clients and their
consultants DG450 2000
Cleaning buildings: legislation and good practice DG448 2000
Composting in the construction industry IP3/05 2005
Construction and demolition waste 2003
Part 1. GG57/1
Part 2. GG57/2
Construction logistics: an introduction DG459 2001
Construction site communication 2003
Part 1. General GG54/1
Part 2. Masonry GG54/2
Construction site packaging wastes: a market position report IP8/02 2002
Delivering a sustainable masterplan IP4/10 2010
Handover of Office Building Operations protocol (HOBO) DG474 2002
Lists of excluded materials: a change in practice DG425 1997
Non-ferrous metal wastes as aggregates in highway construction IP8/06
2006
Offsite construction: an introduction GG56 2003
Reclamation and recycling of building materials: industry position report
IP7/00 2000
Recycling fibre reinforced polymers in the construction industry IP4/04
2004
The Construction Products Regulation and CE marking IP13/12
The Quality Mark Scheme GG55 2003
Using small volume wastes in construction IP9/05 2005
Waste minimisation on a construction site DG447 2000
Whole building commissioning 2004
Part 1.	A guide for clients IP8/04/1
Part 2.	A guide for designers IP8/04/2
Part 3.	A guide for specifiers IP8/04/3
Part 4.	A guide for facilities managers IP8/04/4
Working with local businesses and residents GG71 2007

ENVIRONMENT AND SERVICES
Air quality, radon and ventilation

Achieving airtightness 2006
Part 1. General principles GG67/1
Part 2. Practical guidance on
techniques – floors, walls and
roofs GG67/2
Part 3. Practical guidance on
techniques – windows and
doors, sealing methods and
materials GG67/3
Airtightness in UK dwellings IP1/00 2000
Airtightness of ceilings: energy loss and condensation risk IP4/06 2006
Background ventilators for dwellings IP2/03 2003
Buildings and radon GG25 1996
Carbon monoxide detectors GG30 1999
CFCs in buildings DG358 1991
Continuous mechanical ventilation in dwellings: design, installation and
operation DG398 1994
Humidistat controlled extract fans: performance in dwellings IP5/99 1999
Improving air quality in homes with supply air windows IP6/03 2003
Improving ventilation in housing GR21 1998
Maintaining good air quality in your home IP9/04 2004
Natural ventilation in non-domestic buildings DG399 1994
Pollution control guides: controlling emissions of particles, vapour and
noise on construction sites 2003
Part 1. Pre-project planning and effective management PG1
Part 2. Site preparation, demolition, earthworks and landscaping PG2
Part 3. Haulage routes, vehicles and plant PG3
Part 4. Materials handling, storage, stockpiles, spillage and disposal
PG4
Part 5. Fabrication processes and internal and external finishes PG5
Positive input ventilation IP12/00
Radon protection for new domestic extension and conservatories GG73
2008

Index – January 2013
Radon protection for new dwellings GG74 2008
Radon protection for new large buildings GG75 2009
Radon solutions for homes
Part 1: Improving underfloor ventilation GR37/1 2012
Ventilation and indoor air quality in schools IP6/05 2005
Ventilation rate measurement IP13/11 2011
Ventilators: ventilation and acoustic effectiveness IP4/99 1999
VOC emissions from building products 2002
Part 1. Sources, testing and emission data DG464/1
Part 2. Control, evaluation and labelling schemes DG464/2
VOC emissions from flooring adhesives: European test methods and
labelling IP12/03 2003

Condensation and dampness

Assessing moisture in building materials 2002
Part 1. Sources of moisture GR33/1
Part 2. Measuring moisture content
GR33/2
Part 3. Interpreting moisture data
GR33/3
Condensation in roofs DG180 1975
Damp-proof courses DG380 1993
Diagnosing the causes of dampness GR5 1997
Drying out buildings DG163 1974
Estimation of thermal and moisture movements and stresses DG227 1979
Estimation of thermal and moisture movements and stresses DG228 1979
Interstitial condensation and fabric degradation DG369 1992
Modelling and controlling interstitial condensation in buildings IP2/05 2005
Modelling condensation and airflows in pitched roofs IP5/06 2006
Remedying condensation in domestic pitched tiled roofs GR30 2001
Rising damp in walls: diagnosis and treatment DG245 2007
Surface condensation and mould growth in traditionally-built dwellings
DG297 1985
Temperature and humidity in batten voids IP20/01 2001
Treating condensation in houses GR7 1997
Treating dampness in basements GR23 1999
Treating rain penetration in houses GR8 1997
Treating rising damp in houses GR6 1997

Electrical, lighting, acoustics and control systems

An introduction to intelligent buildings 2008
Part 1. Benefits and technology
IP13/08/1
Part 2. Legislation, planning and
design IP13/08/2
Control of solar shading IP12/02 2002
Dealing with poor sound insulation between new dwellings IP14/02 2002
Developments in innovative lighting IP9/00 2000
Digitally enabled communities IP8/10 2010
Dwellings and energy efficient lighting: new regulation Part L IP5/02 2002
Electrical interference in buildings DG335 1988
Electronic tagging and wireless technologies 2002
Part 1.	Application in the construction industry IP16/02/1
Part 2.	An overview IP16/02/2
Estimating daylight in buildings DG309 1986
Hospitals in the best light: an introduction to hospital lighting IP14/00 2000
Impact of horizontal shading devices on peak solar gains through windows
IP17/03 2003
Improving sound insulation 1999
Part 1. GR22/1
Part 2. GR22/2
Improving the sound insulation of separating walls and floors DG293 1985
Installing BMS to meet electromagnetic compatibility requirements DG424 1997
Installing smart home digital networks GG77 2009
Insulation against external noise DG338 1988

How to order
• t: +44 (0)1344 328038
• f: +44 (0)1344 328005
• e: brepress@ihs.com
• www.brebookshop.com
• for current prices visit
our website

5

Internet Protocol: an introductory guide IP1/07 2007
Minimising noise from domestic fan systems: fan-assisted radon mitigation
systems GG26 1996
Lighting 2004
Part 1. General principles GG61/1
Part 2. Domestic and exterior GG61/2
Part 3.	Non-domestic GG61/3
Photoelectric control of lighting: design, setup and installation issues
IP2/99 1999
Photovoltaics: integration into buildings DG438 1999
Prefabricated power cabling for buildings: procuring, installing and testing
DG456 2001
Protecting buildings against lightning DG428 1998
Rain noise from glazed and lightweight roofing IP2/06 2006
Reducing impact and structure-borne sound in buildings IP4/01 2001
Retrofitting solar shading IP11/02 2002
Selecting lighting controls DG498 2006
Site layout planning for daylight IP23/12 2012
Site layout planning for sunlight and solar gain IP22/12 2012
Smart meters and smart energy networks for dwellings IP2/12
Sound insulation: basic principles DG337 1994
Specifying LED lighting IP15/10 2010
Standardised and prefabricated wiring for buildings 2001
Part 1.	Use in building services IP15/01/1
Part 2. Case studies IP15/01/2
Traffic noise and overheating in offices DG162 1974
Whole life performance of domestic automatic door controls IP2/02 2002

Energy, insulation and air conditioning

Air as a refrigerant in air conditioning systems in buildings IP21/00 2000
Ammonia refrigerant in buildings: minimising the hazards IP18/00 2000
An introduction to PassivHaus IP 12/08 2008
Assessing the effects of thermal bridging at junctions and around openings
IP1/06 2006
Biomass systems IP7/11 2011
Building-integrated photovoltaic systems IP11/12 2012
Condensing boilers DG339 1988
Determining the minimum thermal resistance of cavity closers IP8/08 2008
Domestic energy use and carbon emissions: scenarios to 2050 IP16/05
2005
Dynamic insulation for energy saving and comfort IP3/03 2003
Energy efficiency in dwellings DG355 1990
Energy in schools: developing and implementing an energy management
strategy IP2/11 2011
Free cooling with displacement ventilation IP6/02 2002
Funding renewable energy projects IP18/12 2012
Ground source heat pumps IP2/10 2010
Improving energy efficiency 1999
Part 1. Thermal insulation GR26/1
Part 2. Boilers and heating systems, draughtstripping GR26/2
Installing thermal insulation: good site practice 2006
Part 1. GG68/1
Part 2. GG68/2
Large-scale low-carbon heating IP9/11 2011
Making use of carbon emissions in the built environment IP25/12 2012
Mechanical installation of roof-mounted photovoltaic systems DG495 2005
Micro-wind turbines on tall buildings IP1/10 2010
Modelling the performance of thermal mass IP6/01 2001
Perimeter chilled beams IP11/04 2004
Photovoltaic systems on dwellings IP8/11 2011
Planning decentralised energy systems in large new developments IP22/10
2010
Potential for reducing carbon emissions from commercial and publicsector buildings IP3/12 2012
Reliability and performance of solar-collector systems DG254 1981
Ground source heat pumps and low-temperature systems IP10/11 2011
SAP for beginners IP10/10 2010
SBEM for non-domestic buildings IP7/10 2010
Small scale, building integrated, wind power systems IP12/05 2005
Solar energy in urban areas IP5/01 2001
Solar thermal systems IP11/11 2011
The Carbon Performance Rating for offices DG457 2001
The importance of energy quality in matching supply and demand
IP5/12 2012
The performance of district heating in new developments IP3/11 2011
Thermal mass in office buildings 2001
Part 1.	An introduction DG454/1
Part 2. Design criteria DG454/2
The scope for reducing carbon emissions from housing IP15/05 2005

6

Index – january 2013

Sustainability and green issues

A guide to GreenPrint IP6/10 2010
Assessing environmental impacts of construction: industry consensus,
BREEAM and UK Ecopoints DG446 2000
Assessing the sustainability of office refurbishment with BREEAM IP19/11
2011
Biodiversity offsetting for developments IP10/12 2012
Carbon emission reductions as a driver for economic regeneration IP5/10
2010
Carbon footprinting and labelling of construction products IP5/11 2011
Carbon reduction commitment IP7/09 2009
Costing sustainability: how much does it cost to achieve BREEAM and
Ecohomes ratings IP4/05 2005
Creating a funding mechanism for UK carbon reduction projects IP17/10
2010
Delivering sustainability objectives through planning IP3/08 2008
Delivering sustainable development in the built environment IP4/09 2009
Environmental benchmarking for property portfolio managers IP1/01 2001
Environmental sustainability in bridge management IP14/04 2004
Environmental weightings: their use in the environmental assessment of
construction products IP4/07 2007
Green buildings revisited 2000
Part 1. Small projects IP13/00/1
Part 2. Large projects IP13/00/2
LCA and REACH: The relationship between life-cycle assessment and the
regulation on the registration, evaluation, authorisation and restriction
of chemicals IP7/12 2012
Life cycle impacts of timber: a review of the environmental impacts of
wood products in construction DG470 2002
LIST (Low Impact Shopfitting Tool) for designing greener shopfitting display
equipment IP1/11 2011
Local authorities’ performance on sustainable construction IP7/01 2001
Managing sustainable construction AP146 2002
Measuring the wellbeing benefits of interior materials IP20/12 2012
Performance and service life in the Environmental Profiles Methodology
and Green Guide to Specification IP1/09 2009
Reducing the effects of climate change by roof design DG486 2004
Refurbishment or redevelopment of office buildings? 2002
Part 1. Sustainability comparisons IP9/02/1
Part 2. Sustainability case histories IP9/02/2
Responsible sourcing of construction products IP6/09 2009
Smart growth IP12/12 2012
Sustainability at BRE IP8/12 2012
Sustainability indicators for utilities IP21/01 2001
Sustainability lessons from private finance and similar private initiatives
IP13/02 2002
Sustainability strategies for healthcare estates IP24/12 2012
Sustainable buildings 2003
Part 1. Benefits for occupiers IP13/03/1
Part 2. Benefits for designers IP13/03/2
Part 3. Benefits for investors and developers IP13/03/3
Part 4. Benefits for constructors IP13/03/4
Sustainable information technology IP19/12 2012
The price of sustainable schools IP1/08 2008
Whole life costing and life-cycle assessment for sustainable building design
DG452 2000
Whole Life Value: sustainable design in the built environment IP10/04
2004

Water supply, drainage and sanitation

Access to domestic underground drainage systems DG292 1984
Below-ground drainage systems GG78 2010
Dealing with noisy plumbing GR32 2002
Disposing of rainwater GG38 2000
Drainage design for buildings with reduced water use IP1/04 2004
Gravity drainage systems for buildings GG76 2009
Preventing hot water scaldings in bathrooms: using TMVs IP14/03 2003
Protecting pipes from freezing GG40 2000
Provision of sanitary appliances and their space requirements GG79 2010
Rainwater harvesting for domestic properties GG82 2012
Reed beds 2000
Part 1.	Application and specification GG42/1
Part 2. Design, construction and maintenance GG42/2
Repairing and replacing rainwater goods GR9 1997
Sanitary pipework 1981
Part 1. Design basis DG248
Part 2. Design of pipework DG249
Self-sealing waste valves for domestic use: an assessment IP8/07 2007
Unvented domestic hot water systems DG308 1986
Water conservation: low flow showers and flow restrictors IP2/00 2000

Water services for domestic properties GG80 2010
Weathering of plastics pipes and fittings IP8/01 2001

Wind, floods and climate

Building in winter GG34 1999
Building overseas in warm climates DG302 1985
Climate and site development 1990
Part 1. General climate of the UK
DG350/1
Part 2. Influence of microclimate
DG350/2
Part 3. Improving microclimate
through design DG350/3
Climate change GG63 2004
Designing urban streets to minimise heat island effects IP19/10 2010
Micro-wind turbines on house roofs IP4/08 2008
New materials in hot climates DG382 1993
Repairing flood damage 1997
Part 1. Immediate action GR11/1
Part 2. Ground floors and basements GR11/2
Part 3. Foundations and walls GR11/3
Part 4. Services, secondary elements, finishes, fittings GR11/4
Repairing frost damage 1998
Part 1. Roofing GR20/1
Part 2. Walls GR20/2
Static and dynamic wind loads on building-mounted microwind turbines
IP14/12 2012
The assessment of wind loads
Part 1. Background and method DG346/1 1989
Part 2. Classification of structures DG346/2 1989
Part 3. Wind climate in the United Kingdom DG346/3 1989
Part 4. Terrain and building factors and gust peak factors DG346/4
1989
Part 5.	Assessment of wind speed over topography DG346/5 1989
Part 6. Loading coefficients for typical buildings DG346/6 1989
Part 7. Wind speeds for serviceability and fatigue assessments
DG346/7 1989
Part 8. Internal pressures DG346/8 1990
Wind actions on buildings and structures DG406 1995
Wind around tall buildings DG390 1994
Wind loading on buildings 1999
Part 1. Brief guidance for using BS 6399-2:1997 DG436/1
Part 2. BS 6399-2:1997 worked examples – effective wind speeds
for a site, and loads on a two-storey house DG436/2
Part 3. BS 6399-2:1997 worked examples – loads on a portal frame
building and on an office tower on a podium DG436/3
Wind loads on canopy roofs DG284 1984
Wind loads on roof-based photovoltaic systems DG489 2004
Wind loads on temporary stage decks DG483 2004
Wind loads on unclad structures SD5 2004
Wind microclimate around buildings DG520 2011
Wind scour of gravel ballast on roofs DG311 1986

FIRE and security
An introduction to the use of fire modelling IP12/10 2010
Assessing the fire performance of existing reinforced concrete flooring
systems IP9/12 2012
BR135: Annex B: performance criteria and classification method of
BS 8414-4:2005 DG501 2007
Domestic smoke alarms DG525 2012
Dust explosions DG288 1984
External fire performance of roofs DG528 2012
Evacuation modelling and human behaviour in fire DG516 2010
Fire doors DG524 2012
Fire engineering in tunnels DG509 2009
Fire modelling DG367 2004
Fire modelling with computational fluid dynamics DG511 2009
Fire performance of light steel-framed buildings IP6/11 2011
Fire performance of Structural Insulated Panel systems IP21/10 2010
Fire risks from combustible cavity insulation DG294 1985
Fixed gas extinguishing systems for fire protection DG513 2009
Installing fire-resisting ductwork and dampers GG81 2011
Lessons learned from real fires DG515 2010
Passive and reactive fire protection to structural steel IP6/12 2012
Precast Hollowcore slabs in fire IP5/03 2003
Residential sprinklers for fire protection
Part 1. Introduction DG519/1 Revised 2012
Part 2. Installation DG519/2 Revised 2012

7

focus on building
Get clear technical advice and building
solutions from a source you can trust
This CD-ROM compilation of BRE Good Builidng and Repair Guides from IHS BRE Press gives you access to a huge
training resource of practical guidance and expertise from BRE, the UK’s leading centre of excellence on the built
environment. Containing over 150 Good Building and Repair Guides, the CD-ROM covers a range of topics, including:
 Water services
 Basement construction
 Installing thermal insulation

 Fixing and finishing plasterboard
 Roofing
 Achieving airtightness

 Loft conversion
 Radon protection
 Plastering

A vast reference library of concise and practical advice for only £150 + VAT

Order BRE Good Builidng and Repair Guide CD-ROM (ref: AP 281)
@ www.brebookshop.com or phone +44 (0) 1344 328038

Risks of dust fires and explosions IP14/08 2008
Safe and secure town centres at night IP10/08 2008
Safe as houses? DG458 2001
Security fog generators DG506 2008
Selecting electronic security systems IP1/12 2012
Self heating and spontaneous combustion IP11/08 2008
Smoke detection in high ceiling spaces
Part 1. Introduction, literature review and modelling
IP15/12/1 2012
Part 2. Fire tests and conclusions IP15/12/2 2012
Sprinkler systems for fire protection of commercial and industrial buildings
DG518 2010
Steel structures supporting composite floor slabs: design for fire DG462
2001
Structural fire engineering design – Introduction DG484 2004
Structural fire engineering design 2004
Part 1.	Aspects of life safety DG490
Part 2. Fire and thermal response DG488
Part 3. Fire development DG485
Structural fire engineering design – Materials behaviour 2004
Part 1. Concrete DG487/1
Part 2. Steel DG487/2
Part 3. Masonry DG487/3
Part 4. Timber DG487/4
Wireless fire detection and European regulations IP6/08 2008

MATERIALS
Bricks, mortar, render, plaster and stone

Assessing external rendering for replacement or repair GG23 1995
Bricks, blocks and masonry made from aggregate concrete 2001
Part 1. Performance requirements
DG460/1
Part 2.	Appearance and
environmental aspects
DG460/2
Building masonry with lime-based mortars GG66 2005
Building mortar DG362 1991
Choosing external rendering GG18 1994

Clay bricks and clay brick masonry 1999
Part 1. DG441/1
Part 2. DG441/2
Cleaning exterior masonry 2000
Part 1. Developing and implementing a strategy DG449/1
Part 2. Methods and materials DG449/2
Cleaning exterior masonry: pretreatment assessment of a stone building
IP9/99 1999
Cleaning exterior masonry: assessing cleaning of a brick-built church
IP10/99 1999
Conservation and cleaning of masonry
Part 1. Stonework DG508/1 2008
Part 2. Brickwork, blockwork and terracotta DG508/2 2009
Part 3 Renders, plasters and stucco DG508/3 2011
Lightweight veneer stone cladding panels IP10/01 2001
Perforated clay bricks DG273 1983
Plasterboard 2007
Part 1. Types and their applications GG70/1
Part 2. Fixing and finishing non-separating walls and floors GG70/2
Part 3. Fixing and finishing separating and compartment walls and
floors GG70/3
Plastering and internal rendering 2005
Part 1. Design and specification GG65/1
Part 2. Workmanship GG65/2
Proprietary renders IP16/03 2003
Repairing external rendering GG24 1995
Replacing failed plaster GG7 1991
Replacing plasterwork GR18 1998
Selecting natural building stones DG420 1997
Unfired clay masonry IP16/11 2011

Composites, metals, paints, adhesives and sealants

Advanced polymer composites in construction IP7/99 1999
Architectural use of polymer composites DG442 1999
Choosing wood adhesives DG340 1989
Corrosion of metals by wood DG301 1985
EN 927: the new European Standard for exterior wood coatings DG466
2002
Fibre reinforced polymer materials in construction IP5/04 2004

8

Index – january 2013

Fibre reinforced polymers in construction: durability IP10/03 2003
Fibre reinforced polymers in construction: predicting weathering IP11/03
2003
Internal painting: tips and hints GR19 1998
Low-solvent primers: performance in construction steelwork IP16/00 2000
Maintaining exterior wood finishes GG22 1995
Natural fibre installation IP18/11 2011
Painting exterior wood DG422 1997
Planned maintenance painting: improving value for money IP7/03 2003
Refixing ceramic wall tiles to internal walls GR29 2001
Repair and maintenance of FRP structures GR34 2003
Selecting building sealants with ISO 11600 DG463 2002
Selecting gaskets for construction joints DG469 2002
Stainless steel as a building material DG349 1989
Straw bale IP15/11 2011
The performance and use of coatings with low solvent content IP8/99
1999
The performance of fibre cement slates: effects of condensation IP19/01
2001
Wood plastic composites and plastic lumber DG480 2004
Wood plastic composites: market drivers and opportunities in Europe
IP2/04 2004
Zinc-coated steel DG305 1986

Concrete

Accelerated carbonation testing of concrete IP20/00 2000
Alkali-activated binder concretes in construction IP4/11 2011
Alkaline ash binders IP9/10 2010
Alkali-silica reaction in concrete 2004
Part 1. Background to the guidance
notes DG330/1
Part 2. Detailed guidance for new
construction DG330/2
Part 3. Worked examples DG330/3
Part 4. Simplified guidance for new
construction using normal
reactivity aggregates DG330/4
Blastfurnace slag and steel slag: their use as aggregates IP18/01 2001
Carbonation of concrete and its effect on durability DG405 1995
Cements with lower environmental impact IP7/08 2008
Concrete in aggressive ground SD1 2005
Concrete strength: the effect of ocean-depth water pressure IP6/00 2000
Concretes with high ggbs contents for use in hard/firm secant piling
IP17/05 2005
Concrete with minimal or no primary aggregate content: the MAGCON
pilot study IP12/04 2004
Corrosion of reinforcement in concrete: electrochemical monitoring
DG434 1998
Corrosion of steel in concrete 2000
Part 1. Durability of reinforced concrete structures DG444/1
Part 2. Investigation and assessment DG444/2
Part 3. Protection and remediation DG444/3
Corrosion of steel in concrete: a review of the effect of humidity DG491
2004
Corrosion of steel in concrete: service life design and prediction DG455
2001
Delayed ettringite formation: in-situ concrete IP11/01 2001
Deterioration of cement-based building materials: lessons learnt IP4/03
2003
Durability of precast HAC concrete in buildings IP8/00 2000
Effects of chemical, physical and mechanical processes on concrete
DG527 2012
HAC concrete in the UK: assessment, durability management,
maintenance and refurbishment SD3 2002
Hemp lime IP14/11 2011
Innovation in concrete frame construction IP11/05 2005
Marine aggregates in concrete DG507 2008
Minimising the risk of alkali-silica reaction: alternative methods IP1/02
2002
Porous aggregates in concrete
Part 1.	Jurassic limestones IP9/01 2001
Part 2. Sandstones from NW England IP6/04 2004
Recycled aggregates DG433 1998
Reinforced autoclaved aerated concrete panels: test results, assessment
and design IP7/02 2002
Reinforced concrete service life design 2006
Part 1. Overview IP3/06/1
Part 2. Design for durability IP3/06/2
Part 3. Service life forecasting and enhancement IP3/06/3
Self-compacting concrete IP3/04 2004

Asset management and service life of concrete structures and components
IP26/12 2012
Shrinkage of natural aggregates in concrete DG357 1991
Silica fume in concrete IP5/09 2009
Tension tests for concrete DG451 2000
Volumetric strain of concrete under uniaxial compression: sustained
loading and high grade concrete IP15/02 2002
Water reducing admixtures in concrete IP15/00 2000

Timber

Advances in timber grading DG445 2000
Assessment of timber structures DG517 2010
Best practice of timber waste management IP9/03 2003
Bio-resins in construction IP4/12 2012
Cross-laminated timber IP17/11 2011
Design of timber floors to prevent decay DG364 1991
Drying distortion of timber DG514 2010
Dry rot: its recognition and control DG299 1993
Durability of timber in ground contact IP14/01 2001
European Standards for wood preservatives and treated wood IP1/03 2003
Evaluating joinery preservatives: performance prediction using BS EN 330
L-joint trials IP2/01 2001
Five-storey timber-frame hall of residence: a reconstruction case study
IP19/00 2000
Green gluing of timber: a feasibility study IP10/05 2005
Guide to machine strength grading of timber DG476 2003
Hardwoods for construction and joinery: current and future sources of
supply DG417 1996
Hardwoods for joinery and construction 1998
Part 1. Technical assessment methods DG431/1
Part 2. Test results and recommendations DG431/2
Part 3. Test results and recommendations DG431/3
Identifying damage by wood-boring insects DG307 2003
Incising UK-grown Sitka spruce IP13/05 2005
Innovation in timber supply at the London 2012 Olympic and Paralympic
Games IP17/12 2012
Insecticidal treatments against wood-boring insects DG327 1992
Insulation of timber-frame construction: U-values and regulations for the
UK, Republic of Ireland and Isle of Man SD7 2008
Preservative-treated timber: ensuring conformity with European Standards
IP6/99 1999
Preservative treated timber: the UK’s code of best practice IP13/01 2001
Service life prediction for timber cladding IP16/12 2012
Specifying structural timber DG416 1996
Termites and UK buildings 1998
Part 1. Biology, detection and diagnosis DG443/1
Part 2. Control and management of subterranean termites DG443/2
The structural use of wood-based panels DG423 1997
Timber bridges DG481 2004
Timber cladding DG521 2011
Timber for joinery DG407 1995
Timber frame: a guide to the construction process DG496 2005
Timber frame construction: an introduction GG60 2004
Timber-frame dwellings: section six of the Domestic Technical Handbook
(Scotland): energy SD6 2008
Timber grading and scanning DG492 2005
Timbers: their natural durability and resistance to preservative treatment
DG429 1998
Using UK-grown Douglas fir and larch timber for external cladding DG494
2005
Using UK-grown Sitka spruce for exterior cladding DG500 2006
Wet rots: recognition and control DG345 1989
Wood-based panel products: their contribution to the conservation of
forest resources DG375 1992
Wood-based panels
Part 1. Oriented strand board (OSB) DG477/1 2003
Part 2. Particleboard (chipboard) DG477/2 2003
Part 3. Cement-bonded particleboard DG477/3 2003
Part 4. Plywood DG477/4 2003
Part 5. Medium density fibreboard (MDF) DG477/5 2004
Part 6. Hardboard, medium board and softboard DG477/6 2004
Part 7. Selection DG477/7 2004
Wood-boring insect attack 1998
Part 1. Identifying and assessing damage GR13/1
Part 2. Treating damage GR13/2
Wood rot: assessing and treating decay GR12 1997

Index – January 2013

GOOD REPAIR GUIDES
GR1
GR2
GR3
GR4
GR5
GR6
GR7
GR8
GR9
GR10

Cracks caused by foundation movement 1996
Damage to buildings caused by trees 1996
Repairing damage to brick and block walls 1996
Replacing masonry wall ties 1996
Diagnosing the causes of dampness 1997
Treating rising damp in houses 1997
Treating condensation in houses 1997
Treating rain penetration in houses 1997
Repairing and replacing rainwater goods 1997
Repairing timber windows 1997
Part 1. Investigating defects and dealing with water leakage
Part 2. Draughty windows, condensation in sealed units,
operating problems, deterioration of frames
GR11
Repairing flood damage 1997
Part 1. Immediate action
Part 2. Ground floors and basements
Part 3. Foundations and walls
Part 4. Services, secondary elements, finishes, fittings
GR12
Wood rot: assessing and treating decay 1997
GR13
Wood-boring insect attack 1998
Part 1. Identifying and assessing damage
Part 2. Treating damage
GR14
Re-covering pitched roofs 1998
GR15
Repairing chimneys and parapets 1998
GR16
Flat roofs 1998
Part 1.	Assessing bitumen felt and mastic asphalt roofs for
repair
Part 2. Repairs to bitumen felt and mastic asphalt roofs
GR17
Repairing and replacing ground floors 1998
GR18
Replacing plasterwork 1998
GR19
Internal painting: tips and hints 1998
GR20
Repairing frost damage 1998
Part 1. Roofing
Part 2. Walls
GR21
Improving ventilation in housing 1998
GR22
Improving sound insulation 1999
Part 1. Diagnosis
Part 2. Treatment
GR23
Treating dampness in basements 1999
GR24
Repointing external brickwork walls 1999
GR25
Supporting temporary openings 1999
GR26
Improving energy efficiency 1999
Part 1. Thermal insulation
Part 2. Boilers and heating systems, draughtstripping
GR27
Cleaning external walls of buildings 2000
Part 1. Cleaning methods
Part 2. Removing dirt and stains
GR28
Repairing brick and block freestanding walls 2000
GR29
Refixing ceramic wall tiles to internal walls 2001
GR30
Remedying condensation in domestic pitched tiled roofs 2001
GR31
Hot air repair of PVC-U window and door frames 2001
GR32
Dealing with noisy plumbing 2002
GR33 	Assessing moisture in building materials 2002
Part 1. Sources of moisture
Part 2. Measuring moisture content
Part 3. Interpreting moisture data
GR34
Repair and maintenance of FRP structures 2003
Earth, clay and chalk walls: inspection and repair methods 2006
GR35
GR36
Bats and refurbishment 2009
GR37

Radon solutions in homes
Part 1. Improving underfloor ventilation 2012
Part 2. Positive house ventilation 2013
Part 3. Radon sump systems 2013

GOOD BUILDING GUIDES
GG1
GG2
GG6
GG7
GG8
GG9
GG10
GG11
GG12
GG13

Repairing or replacing lintels 1992
Surveying masonry chimneys for repair or rebuilding 1990
Outline guide to assessment of traditional housing for
rehabilitation 1990
Replacing failed plaster 1991
Bracing trussed rafter roofs 1991
Habitability guidelines for existing housing 1991
Temporary support for openings in external walls: assessing load
1992
Supplementary guidance for assessment of timber-framed
houses: Part 1. Examination 1993
Supplementary guidance for assessment of timber-framed
houses: Part 2. Interpretation 1993
Surveying brick or blockwork freestanding walls 1992

GG14
GG15

9

Building simple plan brick or blockwork freestanding walls 1994
Providing temporary support during work on openings in
external walls 1992
GG16
Erecting, fixing and strapping trussed rafter roofs 1993
GG17
Freestanding brick walls: repairs to copings and cappings 1993
GG18
Choosing external rendering 1994
GG19
Building reinforced, diaphragm and wide plan freestanding
walls 1994
GG20
Removing internal loadbearing walls in older dwellings 1999
GG21 	Joist hangers 1996
GG22
Maintaining exterior wood finishes 1995
GG23 	Assessing external rendering for replacement or repair 1995
GG24
Repairing external rendering 1995
GG25
Buildings and radon 1996
GG26
Minimising noise from domestic fan systems: fan-assisted radon
mitigation systems 1996
GG27
Building brickwork or blockwork retaining walls 1996
GG28
Domestic floors: repairing or replacing floors and flooring 1997
Part 1. Construction, insulation and damp-proofing
Part 2. Concrete floors, screeds and finishes
Part 3. Timber floors and decks
Part 4. Magnesite, tiles, slabs and screeds
Part 5. Wood blocks and suspended timber
GG29
Connecting walls and floors 1997
Part 1.	A practical guide
Part 2. Design and performance
GG30
Carbon monoxide detectors 1999
GG31
Insulated external cladding systems 1999
GG32
Ventilating thatched roofs 1999
GG33
Building damp-free cavity walls 1999
GG34
Building in winter 1999
GG35
Building without cold spots 1999
GG36
Building a new felted flat roof 2000
GG37
Insulating roofs at rafter level: sarking insulation 2000
GG38
Disposing of rainwater 2000
GG39
Simple foundations for low-rise housing
Part 1. Site investigation 2000
Part 2. ‘Rule of thumb’ design 2000
Part 3. Groundworks: getting it right 2002
GG40
Protecting pipes from freezing 2000
GG41
Installing wall ties 2000
GG42
Reed beds 2000
Part 1.	Application and specification
Part 2. Design, construction and maintenance
GG43
Insulated profiled metal roofs 2000
GG44
Insulating masonry cavity walls 2000
Part 1. Techniques and materials
Part 2. Principal risks and guidance
GG45
Insulating ground floors 2001
GG46
Domestic chimneys for solid fuel: flue design and installation
2001
GG47
Level external thresholds: reducing moisture penetration and
thermal bridging 2001
GG48
Installing domestic automatic door controls 2001
GG49
Installing domestic automatic window controls 2001
GG50
Insulating solid masonry walls 2002
GG51
Ventilated and unventilated cold pitched roofs 2002
GG52
Site-cut pitched timber roofs 2002
Part 1. Design
Part 2. Construction
GG53
Foundations for low-rise building extensions 2002
GG54
Construction site communication 2003
Part 1. General
Part 2. Masonry
GG55
The Quality Mark Scheme 2003
GG56
Offsite construction: an introduction 2003
GG57
Construction and demolition waste (2 parts) 2003
GG58
Thin layer mortar masonry 2003
GG59
Building on brownfield sites
Part 1. Identifying the hazards GG59/1 2003
Part 2. Reducing the risks GG59/2 2004
GG60
Timber frame construction: an introduction 2004

How to order
• t: +44 (0)1344 328038
• f: +44 (0)1344 328005
• e: brepress@ihs.com
• www.brebookshop.com

10

Index – january 2013

focus on
building elements
Build to last
with the BRE Building Elements series
Get comprehensive information about the main elements of buildings with BRE’s Building Elements series.
Over 1500 pages of extensively illustrated practical details, descriptions and best practice advice provide an
essential reference for all building professionals.
 Roofs and roofing BR 504 £47.50
 Walls, windows and doors BR 352 £47.50
 Floors and flooring BR 460 £47.50
 Building services BR 404 £47.50
 Foundations, basements and external works BR 440 £47.50
 Understanding dampness BR 466 £42.50
 Building Elements series – set of 6 books AP 243 £195

Order @ www.brebookshop.com or phone +44 (0) 1344 328038
GET ALL 6 BOOKS (Ref: AP 243) FOR £195 (A SAVING OF £85!)

GG61

Lighting 2004
Part 1. General principles
Part 2. Domestic and exterior
Part 3.	Non-domestic
GG62
Retro-installation of bed joint reinforcement in masonry 2004
GG63
Climate change 2004
GG64
Tiling and slating pitched roofs 2005
Part 1. Design criteria, underlays and battens
Part 2. Plain and profiled clay and concrete tiles
Part 3.	Natural and manmade slates
GG65
Plastering and internal rendering 2005
Part 1. Design and specification
Part 2. Workmanship
GG66
Building masonry with lime-based mortars 2005
GG67	Achieving airtightness 2006
Part 1. General principles
Part 2. Guidance on techniques: floors, walls and roofs
Part 3. Guidance on techniques - windows and doors,
sealing methods and materials
GG68
Installing thermal insulation 2006
Part 1. Good site practice
Part 2. Good site practice
GG69
Loft conversion 2006
Part 1. Structural considerations
Part 2. Safety, insulation and services
GG70
Plasterboard 2007
Part 1. Types and their applications
Part 2. Fixing and finishing non-separating walls and floors
Part 3. Fixing and finishing separating and compartmenting
walls and floors
GG71
Working with local businesses and residents 2007
GG72
Basement construction and waterproofing 2007
		 Part 1. Site investigation and preparation
		 Part 2. Construction, safety, insulation and services
GG73
Radon protection for new domestic extensions and
conservatories with solid concrete ground floors 2008
GG74
Radon protection for new dwellings 2008
GG75
Radon protection for new large buildings 2009
GG76
Gravity drainage systems for buildings 2009
GG77
Installing smart home digital networks 2009
GG78
Below-ground drainage systems 2010

GG79
GG80
GG81
GG82

Provision of sanitary appliances and their space requirements
2010
Water services for domestic properties 2010
Installing fire-resisting ductwork and dampers 2011
Rainwater harvesting for domestic properties 2012

POLLUTION CONTROL GUIDES
AP160

Controlling particles, vapour and noise pollution from
construction sites 2003 (5-part set):
Part 1. Pre-project planning and effective management
Part 2. Site preparation, demolition, earthworks and 		
landscaping
Part 3. Haulage routes, vehicles and plant
Part 4. Materials handling, storage, stockpiles, spillage and 		
disposal
Part 5. Fabrication processes and internal and external finishes

in-situ ground testing GUIDES
AP159 	A simple guide to in-situ ground testing 2003 (7-part set):
Part 1. What is it and why do it?
Part 2. Cone penetration testing
Part 3. Flat dilatometer testing
Part 4. Dynamic probing
Part 5. Pressuremeter testing
Part 6. Large-diameter plate loading tests
Part 7. Geophysical testing

How to order
• t: +44 (0)1344 328038
• f: +44 (0)1344 328005
• e: brepress@ihs.com
• www.brebookshop.com
• for current prices visit
our website

Index – January 2013

DIGESTS

Current titles showing date of latest revision:
r=minor revision, E=new edition
DG12
DG145
DG161
DG162
DG163
DG180
DG208
DG217
DG223

Structural design in architecture 1969r
Heat losses through ground floors 1984r
Reinforced plastics cladding panels 1973
Traffic noise and overheating in offices 1973
Drying out buildings 1973
Condensation in roofs 1986r
Increasing the fire resistance of existing timber floors 1988
Wall cladding defects and their diagnosis 1977
Wall cladding: designing to minimise defects due to
inaccuracies and movements 1978
DG227 Estimation of thermal and moisture movements and stresses:
Part 1. 1978
DG228 Estimation of thermal and moisture movements and stresses:
Part 2. 1978
DG240 Low-rise buildings on shrinkable clay soils: Part 1. 1993E
DG241 Low-rise buildings on shrinkable clay soils: Part 2.1990r
DG245 Rising damp in walls: diagnosis and treatment 2007E
DG248 Sanitary pipework: Part 1. Design basis 1981
DG249 Sanitary pipework: Part 2. Design of pipework 1981
DG251 	Assessment of damage in low-rise buildings 1990E, 1995r
DG254 Reliability and performance of solar-collector systems 1981
DG268 Common defects in low-rise traditional housing 1988r
DG273 Perforated clay bricks 1983
DG282 Structural appraisal of buildings with long-span roofs 1984
DG284 Wind loads on canopy roofs 1986E
DG288 Dust explosions 1984
DG292 	Access to domestic underground drainage systems 1985
DG293 Improving the sound insulation of separating walls and floors
1985
DG294 Fire risks from combustible cavity insulation 1985
DG295 Stability under wind load of loose-laid external roof insulation
boards 1985
DG297 Surface condensation and mould growth in traditionally-built
dwellings 1990r
DG298 Low-rise building foundations: the influence of trees in clay soils
1999E
DG299 Dry rot: its recognition and control 1993r
DG301 Corrosion of metals by wood 1985
DG302 Building overseas in warm climates 1985
DG305 Zinc-coated steel 1986
DG307 Identifying damage by wood-boring insects 1996r
DG308 	Unvented domestic hot water systems 1986
DG309 Estimating daylight in buildings 1986
DG311 Wind scour of gravel ballast on roofs 1986
DG312 Flat roof design: the technical options 1986
DG318 Site investigation for low-rise building: desk studies 1987
DG322 Site investigation for low-rise building: procurement 1987
DG324 Flat roof design: thermal insulation 1987
DG327 Insecticidal treatments against wood-boring insects 1993r
DG329 Installing wall ties in existing construction 2000E
DG330 	Alkali-silica reaction in concrete 2004
Part 1. Background to the guidance notes
Part 2. Detailed guidance for new construction
Part 3. Worked examples
Part 4. Simplified guidance for new construction using
normal reactivity aggregates
DG335 Electrical interference in buildings 1988
DG336 Swimming pool roofs: minimising the risk of condensation using
warm-deck roofing 1989
DG337 Sound insulation: basic principles 1994
DG338 Insulation against external noise 1989
DG339 Condensing boilers 1990r
DG340 Choosing wood adhesives 1989
DG343 Simple measuring and monitoring of movement in low-rise
buildings: Part 1. Cracks 1989
DG344 Simple measuring and monitoring of movement in low-rise
buildings: Part 2. Settlement, heave and out-of-plumb
1995r
DG345 Wet rots: recognition and control 1989
DG346 The assessment of wind loads
Part 1. Background and method 1992r
Part 2. Classification of structures 1989
Part 3. Wind climate in the United Kingdom 1992r
Part 4. Terrain and building factors and gust peak factors
1992r
Part 5.	Assessment of wind speed over topography 1989
Part 6. Loading coefficients for typical buildings 1989
Part 7. Wind speeds for serviceability and fatigue
assessments 1989

11

Part 8. Internal pressures 1990
Site investigation for low-rise building: the walk-over survey
1989
DG349 Stainless steel as a building material 1989
DG350 Climate and site development 1990
Part 1. General climate of the UK
Part 2. Influence of microclimate
Part 3. Improving microclimate through design
DG351 Re-covering old timber roofs 1990
DG352 	Underpinning 1993r
DG355 Energy efficiency in dwellings 1990
DG357 Shrinkage of natural aggregates in concrete 1991
DG358 CFCs in buildings 1992E
DG359 Repairing brick and block masonry 1991
DG360 Testing bond strength of masonry 1991
DG361 Why do buildings crack? 1991
DG362 Building mortar 1991
DG364 Design of timber floors to prevent decay 1991
DG365 Soakaway design 2007r
DG366 Structural appraisal of existing buildings, including for a material
change of use 2012 E
Part 1. Requirements for a structural appraisal
Part 2. Preparation for structural appraisal
Part 3. Structural appraisal procedures
Pat 4	Additional considerations and information sources
DG367 Fire modelling 2004
DG369 Interstitial condensation and fabric degradation 1992
DG370 Control of lichens, moulds and similar growths 1992
DG374 Relocatable buildings: structural design, construction and
maintenance 1992
DG375 Wood-based panel products: their contribution to the
conservation of forest resources 1992
DG377 Selecting windows by performance 1992
DG379 Double glazing for heat and sound insulation 1993
DG380 Damp-proof courses 1993
DG381 Site investigation for low-rise building: trial pits 1993
DG382 	New materials in hot climates 1993
DG383 Site investigation for low-rise building: soil description 1993
DG386 Monitoring building and ground movement by precise levelling
1994
DG390 Wind around tall buildings 1994
DG395 Slurry trench cut-off walls to contain contamination 1994
DG398 Continuous mechanical ventilation in dwellings: design,
installation and operation 1994
DG399 	Natural ventilation in non-domestic buildings 1994
DG401 Replacing wall ties 1995
DG402 Static load testing: concrete floor and roof structures within
buildings 1995
DG403 Damage to structures from ground-borne vibration 1995
DG404 PVC-U windows 1995
DG405 Carbonation of concrete and its effect on durability 1995
DG406 Wind actions on buildings and structures 1995
DG407 Timber for joinery 1995
DG409 Masonry and concrete structures: measuring in-situ stress and
elasticity using flat jacks 1995
DG411 Site investigation for low-rise buildings: direct investigations
1996
DG412 Desiccation in clay soils 1996
DG415 Reducing the risk of pest infestations in buildings 1996
DG416 Specifying structural timber 1996
DG417 Hardwoods for construction and joinery: current and future
sources of supply 1996
DG418 Bird, bee and plant damage to buildings 1996
DG419 Flat roof design: bituminous roofing membranes 1996
DG420 Selecting natural building stones 1997
DG421 Measuring the compressive strength of masonry materials: the
screw pull-out test 1997
DG422 Painting exterior wood 1997
DG423 The structural use of wood-based panels 1997
DG424 Installing BMS to meet electromagnetic compatibility
requirements 1997
DG425 Lists of excluded materials: a change in practice 1997
DG426 The response of structures to dynamic crowd loads 2004
DG427 Low-rise buildings on fill 1998
Part 1. Classification and load-carrying characteristics
Part 2. Site investigation, ground movement and foundation
design
Part 3. Engineered fill
DG428 Protecting buildings against lightning 1998
DG429 Timbers: their natural durability and resistance to preservative
DG348

12

Index – january 2013

treatment 1998
Plastics external glazing 1998
Hardwoods for joinery and construction 1998
Part 1. Technical assessment methods
Part 2. Test results and recommendations
Part 3. Test results and recommendations
DG432 	Aircrete: thin joint mortar systems 1998
DG434 Corrosion of reinforcement in concrete: electrochemical
monitoring 1998
DG436 Wind loading on buildings 1999
Part 1. Brief guidance for using BS 6399-2:1997
Part 2. BS 6399-2:1997 worked examples – effective wind
speeds for a site, and loads on a two-storey house
Part 3. BS 6399-2:1997 worked examples – loads on a
portal frame building and on an office tower on a
podium
DG437 Industrial platform floors: mezzanine and raised storage 1999
DG438 Photovoltaics: integration into buildings 1999
DG439 Roof loads due to local drifting of snow 1999
DG440 Weathering of white external PVC-U 1999
DG441 Clay bricks and clay brick masonry (2 parts) 1999
DG442 	Architectural use of polymer composites 1999
DG443 Termites and UK buildings 1999
Part 1. Biology, detection and diagnosis
Part 2. Control and management of subterranean termites
DG444 Corrosion of steel in concrete 2000
Part 1. Durability of reinforced concrete structures
Part 2. Investigation and assessment
Part 3. Protection and remediation
DG445 	Advances in timber grading 2000
DG430
DG431

DG446 	Assessing environmental impacts of construction – Industry
consensus, BREEAM and UK Ecopoints 2000
DG447 Waste minimisation on a construction site 2000
DG448 Cleaning buildings: legislation and good practice 2000
DG449 Cleaning exterior masonry 2000
Part 1. Developing and implementing a strategy
Part 2. Methods and materials
DG450 Better building – integrating the supply chain: a guide for clients
and their consultants 2000
DG451 Tension tests for concrete 2000
DG452 Whole life costing and life-cycle assessment for sustainable
building design 2000
DG453 Insulating glazing units 2000
DG454 Thermal mass in office buildings 2001
Part 1.	An introduction
Part 2. Design criteria
DG455 Corrosion of steel in concrete: service life design and prediction
2001
DG456 Prefabricated power cabling for buildings: procuring, installing
and testing 2001
DG457 The Carbon Performance Rating for offices 2001
DG458 Safe as houses? 2001
DG459 Construction logistics: an introduction 2001
DG460 Bricks, blocks and masonry made from aggregate concrete 2001
Part 1. Performance requirements
Part 2.	Appearance and environmental aspects
DG461 Corrosion of metal components in walls 2001
DG462 Steel structures supporting composite floor slabs: design for fire
2001
DG463 Selecting building sealants with ISO 11600 2002
DG464 VOC emissions from building products 2002
Part 1. Sources, testing and emission data
Part 2. Control, evaluation and labelling schemes
DG465 	U-values for light steel-frame construction 2002
DG466 EN 927: the new European Standard for exterior wood coatings
2002
DG467 Slate and tile roofs: avoiding damage from aircraft wake vortices
2002
DG468 	AAC ‘aircrete’ blocks and masonry (2 parts) 2002
DG469 Selecting gaskets for construction joints 2002
DG470 Life cycle impacts of timber: a review of the environmental
impacts of wood products in construction 2002
DG471 Low-rise building foundations on soft ground 2002
DG472 Optimising ground investigation 2002
DG474 Handover of Office Building Operations protocol 2002
DG475 Tilt of low-rise buildings with particular reference to progressive
foundation movement 2003
DG476 Guide to machine strength grading of timber 2003
DG477 Wood-based panels
Part 1. Oriented strand board (OSB) 2003
Part 2. Particleboard (chipboard) 2003

Part 3. Cement-bonded particleboard 2003
Part 4. Plywood 2003
Part 5. Medium density fibreboard (MDF) 2004
Part 6. Hardboard, medium board and softboard 2004
Part 7. Selection 2004
DG478 Building performance feedback: getting started 2003
DG479 Timber piles and foundations 2004
DG480 Wood plastic composites and plastic lumber 2004
DG481 Timber bridges 2004
DG482 Contaminated land: ingress of organic vapours into buildings 2004
DG483 Wind loads on temporary stage decks 2004
DG484 Structural fire engineering design: introduction 2004
DG485 Structural fire engineering design: fire development 2004
DG486 Reducing the effects of climate change by roof design 2004
DG487 Structural fire engineering design 2004
Part 1. Materials behaviour: concrete
Part 2. Materials behaviour: steel
Part 3. Materials behaviour: masonry
Part 4. Materials behaviour: timber
DG488 Structural fire engineering design: fire and thermal response
2004
DG489 Wind loads on roof-based photovoltaic systems 2004
DG490 Structural fire engineering design: aspects of life safety 2004
DG491 Corrosion of steel in concrete: a review of the effect of humidity
2004
DG492 Timber grading and scanning 2005
DG493 Safety considerations in designing roofs 2005
DG494 	Using UK-grown Douglas fir and larch timber for external
cladding 2005
DG495 Mechanical installation of roof-mounted photovoltaic systems 2005
DG496 Timber frame buildings. A guide to the construction process
2005
DG497 Factory glazed windows 2005
Part 1. Introduction and the glazing process
Part 2. Transport, storage and installation
DG498 Selecting lighting controls 2006
DG499 Designing roofs for climate change: modifications to good
practice guidance 2006
DG500	Using UK-grown Sitka spruce for exterior cladding 2006
DG501 BR135: Annex B: performance criteria and classification
method for BS 8414-2:2005
DG502 Principles of masonry conservation management 2007
DG503 External timber structures: preservative treatment and durability
2007
DG504 Modified wood: an introduction to products in UK construction
2007
DG505	Access to buildings 2008
DG506 Security fog generators 2008
DG507 Marine aggregates in concrete 2008
DG508 Conservation and cleaning of masonry
Part 1. Stonework 2008
Part 2. Brickwork, blockwork and terracotta 2009
Part 3. Renders, plasters and stucco 2011
DG509 Fire engineering in tunnels 2009
DG510 Concrete structure management 2009
DG511 Fire modelling with computational fluid dynamics 2009
DG512 Developments in fire detection and fire alarm systems 2009
DG513 Fixed gas extinguishing systems for fire protection 2009
DG514 Drying distortion of timber 2010
DG515 Lessons learned from real fires 2010
DG516 Evacuation modelling and human behaviour in fire 2010
DG517	Assessment of timber structures 2010
DG518 Sprinkler systems for fire protection of commercial and
industrial buildings 2010
DG519 Residential sprinklers for fire protection
Part 1. Introduction 2012
Part 2. Installation 2012
DG520 Wind microclimate around buildings 2011

How to order
• t: +44 (0)1344 328038
• f: +44 (0)1344 328005
• e: brepress@ihs.com
• www.brebookshop.com
• for current prices visit
our website

Index – January 2013
DG521
DG522

DG523

DG524
DG525
DG526
DG527

Timber cladding 2011
Hardcore for supporting ground floors of buildings 2011
Part 1. Selecting and specifying materials
Part 2. Placing hardcore and the legacy of problem 		
materials
Flood-resilient building
Part 1. Legislation, planning, flood risk assessment and 		
performance of buildings 2012
Part 2. Building in flood-risk areas and designing flood-		
resilient buildings 2012
Fire doors 2012
Domestic smoke alarms 2012
Structural assessment of existing large panel system (LPS)
dwelling blocks for accidental loads 2012
Effects of chemical, physical and mechanical processes on
concrete 2012

SPECIAL DIGESTS
SD1
Concrete in aggressive ground 2005
SD2:2006
Timber frame dwellings. Conservation of fuel and power:
AD L1A guidelines 2nd edition 2006
SD3
HAC concrete in the UK: assessment, durability management,
maintenance and refurbishment 2002
SD4:2007
Masonry walls and beam-and-block floors U-values and
building regulations 2nd edition 2007
SD5
Wind loads on unclad structures 2004
SD6
Timber-frame dwellings section six of the Domestic Technical
Handbook (Scotland): energy 2008
SD7
Insulation of timber-frame construction: U-values and
regulations for the UK, Republic of Ireland and Isle of Man
2008

INFORMATION PAPERS

Published since January 2001. Approximately 400 Information Papers
published before 2001 are available at www.brebookshop.com
IP1/01
IP2/01

Environmental benchmarking for property portfolio managers
Evaluating joinery preservatives: performance prediction using
BS EN 330 L-joint trials
IP3/01
Dynamic stiffness of wall ties used in masonry cavity walls:
measurement procedure
IP4/01
Reducing impact and structure-borne sound in buildings
IP5/01
Solar energy in urban areas
IP6/01
Modelling the performance of thermal mass
IP7/01
Local authorities’ performance on sustainable construction
IP8/01
Weathering of plastics pipes and fittings
IP9/01
Porous aggregates in concrete: Jurassic limestones
IP10/01 Lightweight veneer stone cladding panels
IP11/01 Delayed ettringite formation: in-situ concrete
IP12/01 Hot air repair of PVC-U profiles
IP13/01 Preservative treated timber: the UK’s code of best practice
IP14/01 Durability of timber in ground contact
IP15/01 Standardised and prefabricated wiring for buildings (2 parts)
IP16/01 Prefabricated housing in the UK
Part 1.	A case study – Murray Grove, Hackney
Part 2.	A case study – CASPAR II, Leeds
Part 3.	A summary paper
IP17/01 	Assessing the effects of thermal bridging at junctions and around
openings
IP18/01 Blastfurnace slag and steel slag: their use as aggregates
IP19/01 The performance of fibre cement slates: effects of condensation
IP20/01 Temperature and humidity in batten voids
IP21/01 Sustainability indicators for utilities
IP1/02
IP2/02
IP3/02
IP4/02
IP5/02
IP6/02
IP7/02
IP8/02
IP9/02
IP10/02
IP11/02
IP12/02

Minimising the risk of alkali-silica reaction: alternative methods
Whole life performance of domestic automatic door controls
Whole life performance of domestic automatic window controls
Loads generated by jumping crowds: experimental assessment
Dwellings and energy efficient lighting: new regulation Part L
Free cooling with displacement ventilation
Reinforced autoclaved aerated concrete panels: test results,
assessment and design
Construction site packaging wastes: a market position report
Refurbishment or redevelopment of office buildings?
Part 1. Sustainability comparisons
Part 2. Sustainability case histories
Metal cladding: assessing the thermal performance of built-up
systems which use ‘Z’ spacers
Retrofitting solar shading
Control of solar shading

IP13/02
IP14/02
IP15/02
IP16/02

IP1/03
IP2/03
IP3/03
IP4/03
IP5/03
IP6/03
IP7/03
IP8/03
IP9/03
IP10/03
IP11/03
IP12/03
IP13/03

IP14/03
IP15/03
IP16/03
IP17/03

13

Sustainability lessons from private finance and similar private
initiatives
Dealing with poor sound insulation between new dwellings
Volumetric strain of concrete under uniaxial compression:
sustained loading and high grade concrete
Electronic tagging and wireless technologies
Part 1.	Application in the construction industry
Part 2.	An overview
European Standards for wood preservatives and treated wood
Background ventilators for dwellings
Dynamic insulation for energy saving and comfort
Deterioration of cement-based building materials: lessons learnt
Precast Hollowcore slabs in fire
Improving air quality in homes with supply air windows
Planned maintenance painting: improving value for money
Helping visually impaired people in their homes: assistive technology
Best practice of timber waste management
Fibre reinforced polymers in construction: durability
Fibre reinforced polymers in construction: predicting weathering
VOC emissions from flooring adhesives: European test methods
and labelling
Sustainable buildings
Part 1. Benefits for occupiers
Part 2. Benefits for designers
Part 3. Benefits for investors and developers
Part 4. Benefits for constructors
Preventing hot water scaldings in bathrooms: using TMVs
Propriety nosings for non-domestic stairs
Proprietary renders
Impact of horizontal shading devices on peak solar gains
through windows

IP1/04
IP2/04

Drainage design for buildings with reduced water use
Wood plastic composites: market drivers and opportunities in
Europe
IP3/04
Self-compacting concrete
IP4/04
Recycling fibre reinforced polymers in the construction industry
IP5/04
Fibre reinforced polymer materials in construction
IP6/04
Porous aggregates in concrete: sandstones from NW England
IP7/04
Designing roofs with safety in mind
IP8/04
Whole building commissioning
Part 1.	A guide for clients
Part 2.	A guide for designers
Part 3.	A guide for specifiers
Part 4.	A guide for facilities managers
IP9/04
Maintaining good air quality in your home
IP10/04 Whole Life Value: sustainable design in the built environment
IP11/04 Perimeter chilled beams
IP12/04 Concrete with minimal or no primary aggregate content: the
MAGCON pilot study
IP13/04 	An introduction to building with Structural Insulated Panels
IP14/04 Environmental sustainability in bridge management
IP1/05
IP2/05
IP3/05
IP4/05

Impact standards for glass
Modelling and controlling interstitial condensation in buildings
Composting in construction
Costing sustainability: how much does it cost to achieve
BREEAM and EcoHomes ratings?
IP5/05
Self-sealing waste valves for domestic use: an assessment
IP6/05
Ventilation and indoor air quality in schools
IP7/05	Aircrete tongue and grooved block masonry
IP8/05
Development of sites containing expansive ferrous slags
IP9/05	Using small volume wastes in construction
IP10/05 Green gluing of timber: a feasibility study
IP11/05 Innovation in concrete frame construction
IP12/05 Small scale, building integrated wind power systems
IP13/05 Incising UK-grown Sitka spruce
IP14/05	Achieving cost effective responsive maintenance
IP15/05 The scope for reducing carbon emissions from housing
IP16/05 Domestic energy use and carbon emissions: scenarios to 2050
IP17/05 Concretes with high ggbs contents for use in hard/firm secant piling
IP1/06	Assessing the effects of thermal bridging at junctions and around
openings
IP2/06
Rain noise from glazed and lightweight roofing
IP3/06
Reinforced concrete service life design
Part 1. Overview
Part 2. Design for durability
Part 3. Service life forecasting and enhancement

14

Index – january 2013

IP4/06	Airtightness of ceilings: energy loss and condensation risk
IP5/06
Modelling condensation and airflows in pitched roofs
IP6/06
Balanced Value for sustainable procurement
IP7/06
Pruning trees to reduce water use: summaries of research;
conclusions and recommendations
IP8/06	Non-ferrous metal wastes as aggregates in highway construction
IP9/06
Refurbishing Victorian housing: guidance and assessment
method for sustainable refurbishment
IP10/06 Pfa grouts for stabilising mine workings

IP15/10
IP16/10
IP17/10
IP18/10
IP19/10
IP20/10
IP21/10
IP22/10

IP1/07
IP3/07

IP1/11

Internet Protocol: an introductory guide
Modern methods of construction (MMC) in housing
Part 1. Drivers and barriers to their use
Part 2. Planning for manufactured housing
Part 3. Designing for manufacture
Part 4. Successful development and manufacture of MMC
products
IP4/07
Environmental weightings: their use in the environmental
assessment of construction products
IP5/07
Principal drivers for reusing foundations
IP7/07
Prefabricated relocatable extensions: evaluating their use for
people with disabilities
IP8/07
Self-sealing waste valves for domestic use: an assessment
IP9/07
Performance-based intervention for durable concrete repairs
IP10/07 Safer floors: guidance on specifying flooring for internal and
external safety in domestic buildings
IP11/07 	Naturally innovative: using biomimetics in construction
IP 1/08 The price of sustainable schools
IP 2/08	New build and refurbishment in the Sustainable Communities
Plan
IP 3/08 Delivering sustainability objectives through planning
IP 4/08 Micro-wind turbines on house roofs
IP 5/08	A guide to certification and approval for engineers and
designers
IP 6/08 Wireless fire detection systems and European regulations
IP 7/08 Cements with lower environmental impact
IP 8/08 Determining the minimum thermal resistance of cavity closers
IP 9/08	Applying the code for sustainable homes on the BRE Innovation
Park
Part 1. Lessons learnt about building fabric
Part 2. Lessons learnt about energy sources, overheating
and ventilation
Part 3. Lessons learnt about water use, harvesting, recycling
and drainage
Part 4. Lessons learnt about architecture, construction and
material sourcing
IP10/08 Safe and secure town centres at night
IP11/08 Self-heating and spontaneous combustion
IP12/08	An introduction to PassivHaus
IP13/08	An introduction to intelligent buildings
Part 1. Benefits and technology
Part 2. Legislation, planning and design
IP14/08 Risks of dust fires and explosions
IP1/09
IP2/09
IP3/09
IP4/09
IP5/09
IP6/09
IP7/09
IP1/10
IP2/10
IP3/10

Performance and service life in the Environmental Profiles
Methodology and Green Guide to Specification
Structural composite connections for sequential seismic and fire
performance
Lessons learned from the Barratt Green House
Delivering sustainable development in the built environment
Silica fume in concrete
Responsible sourcing of construction products
Carbon reduction commitment

Micro-wind turbines on tall buildings
Ground source heat pumps
Sustainable refurbishment of non-traditional housing and pre1920s solid wall housing
IP4/10
Delivering a sustainable masterplan
IP5/10
Carbon emission reductions as a driver for economic
regeneration
IP6/10	A guide to GreenPrint
IP7/10
SBEM for non-domestic buildings
IP8/10
Digitally enabled communities
IP9/10	Alkaline ash binders
IP10/10 SAP for beginners
IP11/10 Sustainability in foundations
IP12/10	An introduction to the use of fire modelling
IP13/10 Cool roofs and their application in the UK
IP14/10 Consumer feedback on low-carbon housing

Specifying LED lighting
Quantifying the cost of poor housing
Creating a funding mechanism for UK carbon reduction projects
Sustainable housing refurbishment
Designing urban streets to minimise heat island effects
Delivering a successful demonstration project
Fire performance of Structural Insulated Panel systems
Planning decentralised energy systems in large new
developments

LIST (Low Impact Shopfitting Tool) for designing greener 		
shopfitting display equipment
IP2/11
Energy in schools
IP3/11
The performance of district heating in new developments
IP4/11	Alkali-activated binder concretes in construction
IP5/11
Carbon footprinting and labelling of construction products
IP6/11
Fire performance of light steel-framed buildings
IP7/11
Biomass systems: key factors for successful installations
IP8/11
Photovoltaic systems on dwellings: key factors for successful
installations
IP9/11
Large-scale low-carbon heating: key factors for successful
installations
IP10/11
Ground source heat pumps and low-temperature systems: key
factors for successful installations
IP11/11
Solar thermal systems: key factors for successful installations
IP12/11
Sustainable refurbishment of the BRE Victorian Terrace
Part 1. Design philosophy
Part 2. The construction process
IP13/11
Ventilation rate measurement: new tracer gases and techniques
for healthy indoor environments
IP14/11
Hemp lime: an introduction to low-impact building materials
IP15/11
Straw bale: an introduction to low-impact building materials
IP16/11	Unfired clay masonry: an introduction to low-impact building
materials
IP17/11
Cross-laminated timber: an introduction to low-impact
building materials
IP18/11	Natural fibre insulation: an introduction to low-impact building
materials
IP19/11	Assessing the sustainability of office refurbishment with
BREEAM: A case study
IP 1/12
IP 2/12
IP 3/12

Selecting electronic security systems
Smart meters and smart energy networks for dwellings
Potential for reducing carbon emissions from commercial and
public-sector buildings
IP4/12
Bio-resins in construction
IP5/12
The importance of energy quality in matching supply and
demand
IP6/12
Passive and reactive fire protection to structural steel
IP7/12
LCA and REACH
IP8/12
Sustainability at BRE
IP9/12	Assessing the fire performance of existing reinforced concrete
flooring systems
IP10/12 Biodiversity offsetting for developments
IP11/12 Building-integrated photovoltaic systems
IP12/12 Smart growth
IP13/12 The Construction Products Regulation and CE marking
IP14/12 Static and dynamic wind loads on building-mounted microwind
turbine
IP15/12 Smoke detection in high ceiling spaces
Part 1. Introduction, literature review and modelling
Part 2. Fire tests and conclusions
IP16/12 Service life prediction for timber cladding
IP17/12 Innovation in timber supply at the London 2012 Olympic and
Paralympic Games
IP18/12 Funding renewable energy projects
IP19/12 Sustainable information technology
IP20/12 Measuring the wellbeing benefits of interior materials
IP21/12	An introduction to structural dynamic comfort criteria
IP22/12 Site layout planning for sunlight and solar gain
IP23/12 Site layout planning for daylight
IP24/12 Sustainability strategies for healthcare estates
IP25/12 Making use of carbon emissions in the built environment
IP26/12	Asset management and service life of concrete structures and
components

Index – January 2013

15

BRE Connect Online

Build on your foundation of knowledge and expertise
WHAT IS BRE CONNECT ONLINE?
BRE Connect Online gives you access to the unrivalled expertise and insight of BRE – the UK’s
leading centre of excellence on the built environment. BRE Connect Online is an annual subscription
service from IHS BRE Press giving online access to over 1700 new and published BRE titles

WHAT DO I GET?

WHAT’S NEW IN 2013?

ALL NEW AND PUBLISHED BRE TITLES

MORE THAN 50 NEW TITLES, INCLUDING:

700 books, reports and guides – research,
innovation, best practice and case studies,
including:
• Designing quality buildings
• Foundations, basements and external works
• Roofs and roofing
• The Green Guide to Specification
• Understanding dampness

• A technical guide to district heating
• Design of durable concrete structures
• Designing for future climate change
• Energy-efficient refurbishment
• Energy surveys and audits
• External fire spread
• Performance of building-integrated PV in
non-domestic buildings

250 Digests – authoritative state-of-the-art reviews

• Radon solutions for homes

600 Information Papers – BRE research and how
to apply it in practice

• Security glazing
• Whole-life value of sustainable buildings

150 Good Building and Repair Guides – illustrated
practical guides to good building and repair work
AND MUCH MORE ...

All this for an annual subscription of only £349 + VAT
Call now on +44 (0) 1344 328038 to find out more or arrange a free trial on
www.ihs.com/BRE102

ORDER FORM

To place your order:

Please send me the following publications:

• t: +44 (0)1344 328038

• f: +44 (0)1344 328005

• e: brepress@ihs.com

• www.brebookshop.com

Publication title

Code

Price

Qty

Total

total
post & packing add 10% (max £10 UK), for overseas add 20%

grand total
Complete the order form and fax back to us on +44 (0)1344 328005. Alternatively email this form to:
brepress@ihs.com or post to: IHS BRE Press, Willoughby Road, Bracknell, Berkshire RG12 8FB, UK

Payment methods

Delivery address

Cheque enclosed
(made payable to IHS Global Ltd)

Name

Please charge my credit card:

Company name

Visa
MasterCard
Eurocard
Switch / Maestro

Job title

e
prices
pric sit
ent se vi

om
curr lea
For ation, pkshop.c
oo
rm
info w.breb
ww

AMEX
Card security no.

Switch / issue no.

Card no.

VAT no.
Delivery address
				Postcode
Tel
Email
BRE Connect subscriber no.
Please register me for IHS BRE Press monthly publications update
by email
Please contact me to discuss my online construction information
requirements
Please contact me to discuss a subscription to BRE Connect /
BRE Connect Online

Start date

/

Expiry date

/

Cardholder’s address (if different from delivery address)

Signature
Date
Ref code: AP295

BRE is the UK’s leading centre of expertise on the built environment,
construction, energy use in buildings, fire prevention and control,
and risk management. BRE is part of the BRE group, a world leading
organisation, delivering sustainability and innovation across the built
environment and beyond. The BRE group is wholly owned by BRE
Trust, a registered charity aiming to advance knowledge, innovation
and communication in all matters concerning the built environment
for the benefit of all. All BRE Group profits are passed to the BRE
Trust to promote its charitable objectives.
BRE is committed to providing impartial and authoritative information
on all aspects of the built environment. We make every effort to ensure
the accuracy and quality of information and guidance when it is
published. However, we can take no responsibility for the subsequent
use of this information, nor for any errors or omissions it may contain.
BRE, Garston, Watford WD25 9XX
Tel: 01923 664000 Email: enquiries@bre.co.uk, www.bre.co.uk

01/13

BRE publications are available from www.brebookshop.com, or
IHS BRE Press, Willoughby Road, Bracknell RG12 8FB
Tel: 01344 328038; Fax: 01344 328005; Email: brepress@ihs.com
Requests to copy any part of this publication should be made to:
IHS BRE Press,
Garston,
Watford WD25 9XX
Tel: 01923 664761
Email: brepress@ihs.com
www.brebookshop.com

AP 295
© BRE 2013
January 2013
ISBN 978-1-84806-298-6



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Create Date                     : 2013:01:21 16:23:48Z
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2013:01:21 16:25:20Z
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2013:01:21 16:25:20Z
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:04f8fdf4-e1e4-4052-8e05-38ba98a8e8fa
Original Document ID            : adobe:docid:indd:f87e3093-e310-11de-8c91-e9e6eab631b8
Document ID                     : xmp.id:05AEAC10E663E21181A9AACB206F614A
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:04AEAC10E663E21181A9AACB206F614A
Derived From Document ID        : xmp.did:04AEAC10E663E21181A9AACB206F614A
Derived From Original Document ID: adobe:docid:indd:f87e3093-e310-11de-8c91-e9e6eab631b8
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2013:01:21 16:23:49Z
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 16
EXIF Metadata provided by EXIF.tools

Navigation menu