AP9210 Apc Masterswitch
User Manual: AP9210
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
996-0845C - IN PROGRESS 3/5/98 4:32 PM Page 2 MasterSwitch ™ MasterSwitch™ provides complete Web and SNMP management and control of your network’s power The MasterSwitch network power controller lets network administrators completely direct the power to connected fileservers and internetworking equipment. From anywhere on the network, administrators can use an SNMP management system or Web browser to power, de-power or reboot equipment. Additionally, MasterSwitch can be connected to a modem for out-of-band management. MasterSwitch affords the network manager complete control of power in the network environment MasterSwitch eases the burden of managing remote sites and maximizes the uptime of servers and internetworking equipment. The MasterSwitch provides 8 relay-controlled outlets. Each outlet offers independent switching of power to a connected load, which allows remote power control without affecting other attached equipment. Whether you’re across the country, across the city or across the hall, MasterSwitch saves time, travel or a late night visit to the office. Managing a remote site can negatively impact a company’s bottom line. Even a simple visit by a field technician to reboot a locked up server can be very costly. MasterSwitch eliminates such visits for more cost-effective network management. With the ever-increasing cost of on-site service calls, the MasterSwitch pays for itself almost immediately. When connected to an APC UPS, MasterSwitch lets you manage the uptime of a system. Power can be shutdown on a receptacle by receptacle basis to extend the runtime of the UPS powering mission-critical equipment. MasterSwitch also allows systems to be powered up sequentially, letting domain controllers boot before other systems and preventing a high in-rush current. MasterSwitch includes complete SNMP management capability; APC extends industry standard MIB-2 compliance to include its MIB for controllable power. The device can be managed alongside any of APC’s intelligent UPSs via a standard SNMP management system and MIB browser. MasterSwitch features embedded Web-based manageability. An intuitive, low bandwidth graphical user interface (GUI) is available and can be accessed by any Web browser. Security for this interface follows the HTTP 1.0 password standard. The interface also lets the user set links to the connected equipment, other managed devices or to APC’s Web site and on-line technical support. Finally, APC has provided built-in out-of-band management capabilities through a RS-232 interface. By connecting a modem to the built-in serial port, the MasterSwitch can be controlled through a remote terminal. MasterSwitch has easy installation To make installation as simple as possible, MasterSwitch can be configured over the network or through a local terminal program. Bootp is included for automatic IP address assignment. If bootp is not available on the user’s network, the device’s IP address can be assigned via the serial interface. Once the device is set-up on the network, no custom client software is needed: simply use a Web browser, SNMP management system or terminal program to control your power. 996-0845C - IN PROGRESS 3/5/98 4:33 PM Page 3 Safety and Reliability MasterSwitch™ controls power, cuts service costs and eases your power management burden Web control Seamless integration into Web-based management strategies. The first power switching device featuring embedded Web management. Control UPS power output d Wherever you use an APC UPS, you can use MasterSwitch to power down connected equipment on an outlet by outlet basis to conserve battery back-up power. Front panel LED’s provide a quick status check of powered loads. a LAN connectivity Built-in Ethernet interface for direct connection to the LAN. b Built-in serial port e LED status check Network Connection Status Users can easily view MasterSwitch’s connection status ensuring a clear communication link. Certified for safety The MasterSwitch is CE, CSA, FCC, UL, and VDE verified. Serial interface for out-of-band or offline configuration and diagnostics. Eight channels of manageable power c The MasterSwitch™ graphical user interface can be conveniently called up through your Web browser. SNMP control Eight independent power channels for complete and flexible management of connected equipment. MasterSwitch can be used with or without a UPS. Network manageable by SNMP to integrate with native SNMP management platforms. c d b e a MasterSwitch™ (shown in an APC NetShelter®) can easily reboot remote servers, internetworking equipment or banks of modems to prevent service calls. The perfect complement to your APC Smart-UPS,® MasterSwitch™ gives you complete, remote control of eight independent power channels to put an end to the frustration of locked-up servers and wasted management time. For more information, visit APC’s Web site at www.apcc.com 996-0845C - IN PROGRESS 3/5/98 4:33 PM Page 4 MASTERSWITCH™ SPECIFICATIONS AP9210 AP9210i INPUT Nominal input voltage 120 VAC Acceptable input voltage 230 VAC 100-140 VAC Nominal input frequency 210-250 VAC 50/60 Hz 50/60 Hz Overcurrent protection 15A resettable circuit breaker 12A resettable circuit breaker Input connector 15 ft. (4.5m) attached NEMA 5-15 line cord 2m IEC 320 to IEC 320 cord 8 NEMA 5-15 outlets 8 IEC 320 outlets 15A 10A OUTPUT Output connectors Maximum total current draw PHYSICAL Size (HxWxD) w/out mt. brackets 1.875” x 17” x 6.5” 4.7 x 43.2 x 16.5 cm Size (HxWxD) w/ mt. brackets 1.875” x 19” x 6.5” 4.8 x 48.3 x 16.5 cm Weight Shipping weight 6.5 lbs 3.0 kg 10.0 lbs 4.5 kg ENVIRONMENTAL Operating elevation (storage) 0 to 3,000 m Operating temperature APPROVALS 0 to 15,000 m 0 to 40º C 0 to 45º C FCC, UL, CSA CE,VDE Secure your server, Smart-UPS® and MasterSwitch™ with an APC NetShelter™ premium enclosure NetShelter™, APC’s premium network enclosure secures and protects all equipment APC’s quality system is certified by ISO 9002 standards. © 1998 APC. All Rights Reserved. All APC trademarks are property of American Power Conversion. Other trademarks are property of their respective owners. Specifications are subject to change without notice. 996-0845C Protecting today’s network environment from power and environmental variables is essential to ensuring high system reliability. APC’s NetShelter solution provides one-stop shopping to meet these needs for rack-mount server and internetworking equipment. The NetShelter enclosure is a high-quality, free-standing cabinet that saves floor space, organizes your equipment, eliminates cabling “rat’s nests,” and physically protects your investment. NetShelter 42U APC Corporate 132 Fairgrounds Road West Kingston, RI 02892 USA Worldwide Tel: (401) 789-0204 Fax: (401) 789-3710 APC Europe Ballybrit Industrial Estate Galway, Ireland Tel: (+353) 91 702000 Fax: (+353) 91 756909 Internet: apcinfo@apcc.com APC Web site: www.apcc.com (shown at left) provides 73.5" of vertical space for industry-standard 19" rackmount equipment. Also available is the 22U NetShelter, a quality solution designed for remote branch locations that have space limitations for equipment. Providing 22U (38.5" / 978mm) of equipment (only 46" high), this enclosure will easily fit in almost any location within the datacenter. APC’s award-winning Smart-UPS, power management software, and environmental monitoring accessories combine with the NetShelter enclosure to form an integrated solution ideal for a variety of network configurations. Measure-UPS® Switch Kit (AP9513) provides easy monitoring of network management nightmares like unauthorized access, by connecting door sensors to Measure-UPS II and reporting NetShelter door openings. Peripherals Workstations Servers Datacenters Software and Accessories SurgeArrest® ProtectNet™ PowerManager™ Back-UPS® Back-UPS Office® Back-UPS Pro® Smart-UPS® Matrix-UPS® Symmetra® PowerChute® plus PowerNet® SNMP UPS Accessories Australia Tel: (+612) 9955-9366 Balkans Tel: (+33) 1 41 90 52 26 Benelux Tel: (+31) 183 611310 Central Africa Tel: (+353) 91 702287 China Tel: (+86) 10.6201.6688 Czech & Slovak Rep. Tel: (+420)(2) 683 7845 Denmark and Finland Tel: (+45) 86 17 01 58 France Tel: (+33)(1) 41 90 52 00 Germany Tel: (+49) 89 51417-0 Hungary Tel: (+36) 1 269 6433 India Tel: (+91) 44 433-1124 Indonesia Tel: (+6221) 650-0813 Italy Tel: (+39) 2 29405508 Japan KK Tel: (+813) 5434 2021 Korea Tel: (+82) 2-501-6492 Malaysia Tel: (+6)(03) 756-8785 Middle East Tel: (+44) 181 769 1963 Moscow Tel: (+7)(095) 929-90-95 Novosibirsk Tel: (+7) 3832 32 00 05 Philippines Tel: (+63)(96) 437-8549 Poland Tel: (+48) 22 666 00 11 Portugal & Spain Tel: (+34) 3-301 23 08 Singapore Tel: (+65) 337 4462 South Africa Tel: (+27) 11 465 5268 Sweden and Norway Tel: (+46) 8 704 8340 Taiwan Tel: (+886) 2 755 1945 Thailand Tel: (+662) 2642885-6 Turkey Tel: (+90)(212) 230 7156 UK Tel: (+44) 1753 511 022 Ukraine Tel: (+380) 44 2955292 996-0845C - IN PROGRESS 3/5/98 4:33 PM Page 5 MasterSwitch Network power control unit for complete manageability of your power 120/230 V ™
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.1 Linearized : No Page Count : 4 Create Date : 1998:03:05 17:27:48 Producer : Acrobat Distiller 3.0 for Power MacintoshEXIF Metadata provided by EXIF.tools