Pololu USB AVR Programmer V2 User’s Guide User
User Manual:
Open the PDF directly: View PDF
Page Count: 53
- Pololu USB AVR Programmer v2 User’s Guide
- 1. Overview
- 2. Contacting Pololu
- 3. Pinout and components
- 4. Getting started
- 5. AVR programming
- 5.1. Connecting an AVR for programming
- 5.2. AVR programming using Atmel Studio
- 5.3. AVR programming using AVR Studio 4
- 5.4. AVR programming using the Arduino IDE
- 5.5. AVR programming using AVRDUDE
- Installing prerequisites in Windows
- Installing prerequisites on Linux
- Installing prerequisites on Mac OS X
- Checking the prerequisites
- Compiling a program
- Programming the AVR
- 5.6. Troubleshooting AVR programming issues
- If the programmer blinks its red LED and resets when you plug it into to the AVR:
- If a motor on your Baby Orangutan or 3pi Robot runs briefly:
- If the computer fails to connect to the programmer:
- If the programmer has problems connecting to the target AVR:
- If the verification step fails for flash programming:
- If the verification step fails for fuses or lock bits:
- Still need help?
- 5.7. Programming faster
- Setting the ISP frequency
- 5.8. Reading and writing from EEPROM and flash
- 5.9. Setting fuses and lock bits
- 5.10. Using the clock output to revive AVRs
- 6. USB-to-TTL serial adapter
- 7. Power settings and status
- 8. Using VCC or VBUS to supply power
- 9. Upgrading firmware