Bayt980
User Manual: bayt980
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
BAYT 980 Oil-hydraulic road traffic barrier Electric motor Opening key 0.37KW (0.5HP) 230V 50Hz 2.4A 510 W 20 µF 1˙350 rev./1’ S3 Oil-hydraulic main unit Mean operating pressure Maximum pressure dispensed Hydraulic oil Tank volume Aluminium removable cover painted, metallic grey version Plaque specifying Bayt 980 type and model 12-2007 Output Power supply voltage Frequency Absorbed current Consumption power Capacitor Motor turning speed Intermittent service Optional LEDs applied on arm in holes provided 2MPa (20bar) 4MPa (40bar) Oil Fadini A 15 by Agip 2.5 litres 22.5 Kg -20°C +80°C IP 673 Static weight of the Main Unit-Piston unit Operating temperature Protection Class Other Features Weight of complete Bayt 980 support post Support post colour Colour of cover and door Complete cycles continuous service Opening-Dwell-Closing Cycles per year (8 hours’service per day) 75 Kg RAL 2002 orange red metallic grey BAYT 980 Oil-hydraulic Road Traffic Barrier No. 180/hour BAYT 980 painted version No. 525˙000 BAYT 980 stainless steel version inox A surcharge will be applied for RAL colour orders differing from standard issue colours. 385 360 R5 32 Designed to house Prit 19 key switch BAYT 900 AR M 980 354 Front 30 4 65 305 View with R532 arm connection on left-handed Bayt 980 Forced voltage cut-out R532 aluminium arm with reflective adhesive strips, provided in modules to be joined together with a dedicated joining terminal. Subject to request the arm is provided with LEDs Arm length is established upon ordering Folding support with adjustable foot Via Mantova, 177/A - 37053 Cerea (Verona) Italy Tel. +39 0442 330422 r.a. - Fax +39 0442 331054 e-mail: info@fadini.net - www.fadini.net 350 305 135 415 Lateral view photoelectric cell side We recommend that installation complies with applicable regulations, the instructions enclosed and EN 12453 and EN 12445 standards in observance of essential EC requisites Painted (RAL 2002) steel support post with electronic programmer, operation connection rod, springloaded piston, oil-hydraulic main unit and electric motor. UM 50 BAYT 350 Designed for Polo 44 photoelectric cell installation Operation piston Earthed steel door with lock Metallic grey paint INI 980 500 Support post with R532 arm applied and designed for photoelectric cells with two holes on either side Polo 44 and Prit 19 key switch UM 1’090 Net length L 300 980 1’090 Interchangeable right- and lefthanded connecting rod Electronic programmer AL 100 Adjustable limit switch with spring-loader feeler Lateral view two-coloured door Anchorage plate 354x304 with M14x200 log bolts Directive 2003/108/EC Disposal of electric and electronic material DO NOT DISPOSE OF AS NORMAL WASTE HARMFUL TO THE ENVIRONMENT For Dealer’s use only The Manufacturer reserves the right to make changes to the product without giving notice GB Smooth, silent operation The hydraulic operation of the arm is silent and smooth, with deceleration approaching closing end (variable interval) and opening when the arm is vertical (fixed deceleration). The force developed by the piston can be adjusted using the maximum hydraulic pressure regulators during opening and closing. A compression spring facilitates arm ascent operations even in manual release situations consequent to electric power failure. The Bayt 980 is provided: - complete with installation and maintenance instructions - calibrated and tested to suit the specific application - right- or left-handed operation - two-colour paint or AISI 304 stainless steel inox version (contains stainless steel internal structural and operative components). Oil-hydraulic road traffic barrier BAYT 980 Each individual Bayt 980 component is developed, checked and tested in the Meccanica Fadini factories to guarantee the product’s quality and professional standard. Electric motor The Bayt 980 operator is a road barrier used to prevent and completely restrict the full width of any driveway or road access. Oil-hydraulic main unit Closed stainless steel support post with lock and MIRI 4 flashing light. Stainless steel inox right-hand version Operation connector with 8 clamping screws suitable for R532 aluminium profile. Standard issue indicator light Bayt 980 electrically powered Stainless steel inox version with fence and Miri 4 flashing light. Designed for continuous use The Bayt 980 road barrier features innovative components and is designed for use in circumstances requiring heavy duty performance, guaranteeing a reliability quality standard that represents the operator’s distinguishing feature. Internal arm joint terminal in pressure-cast aluminium A single compact body The product’s structure includes a painted, treated steel plate support post, with a shaped, reinforced interior housing the electronic management programmer and the motor-main unit –hydraulic piston - compression spring unit. This unit is assembled as a single compact body, making the Bayt 980 practical and reliable, without loose components requiring difficult installation and maintenance operations. Two-colour painted version of Bayt 980 with fence and Polo 44 photoelectric cells. Bayt 980 right-hand version with Visual 344 modular accessory post Arm profile R532 Bayt 980 with Polo 44 photoelectric cells on support post and Geco 9 token-operated control device. Arm profile R532 New arm section With its elliptical section, the entire length of the anodised aluminium arm is devoid of dangerous edges, to guarantee total safety. The section also includes a lower runner for the optional installation of aluminium fences (barrier attached below the arm) or rubber safety strips. The arm is provided in two separate lengths (3.20 and 2.10 metres), for connection with an inner expansion joint that makes it possible to cover any carriageway width. In order to make the barrier visible at night, the following accessories are available: - as standard issue, red reflective adhesive strips to be applied on the arm - as an optional, flashing red LEDs, to be fitted to the entire length of the arm (request upon ordering). The moving arm has a fixed fork-shaped or folding pedestal. The barrier action is guaranteed by the rotation of the arm. Articulated arms are available subject to specific request for access to covered areas and underground garages. A hinge-mounted painted and treated steel sheet door grants access to the components inside when using a customized toothed key. A voltage cut out switch is supplied as standard issue in order to interrupt the power supply to the programmer inside when the door is opened. A treated and painted aluminium cover covers the top of the support post housing the limit switches and designed for the installation of the Miri 4 flashing light. Installation requires prior cement embedding of the anchorage base with brackets screwed in and protruding for the subsequent clamping to the Bayt 980 operator. Voltage cut-out Stainless steel inox support post New elliptical section. Standard issue colours Ral 2002 orange red and metallic grey Stainless steel inox A surcharge will be applied for RAL colour orders differing from standard issue colours. Standard production 4.20 metre arm 6.40 metre arm 6.40 metre arm 8.50 metre arm with fence with fence Painted support post with MIRI 4 flashing light, with 40 Kg counterweight and fence applied to arm. Opening times 4 seconds 8 seconds 14 seconds 19 seconds Cabinet with customized key to open the door, aluminium cover, fitted with plugs and holes for Polo 44 installation and Prit 19 Runner for the installation of fences or rubber profile. Fastening terminal for joining two pieces of R532 arm. 8.0 metre righthanded Bayt 980 with reinforcement ropes, counterweights and painted support post. Also available in stainless steel inox version. Each BAYT 980 code article includes: Main-unit-Piston-Compression spring unit for 90° arm raising, type “COS 982” ELPRO 10 PLUS series electronic programmer Electric system connected to arm limit switch, electric motor, circuit breaker Circuit breakers with forced interruption and earthed power cable R532 aluminium arm connection with 8 bolts. Fixing plate with galvanised log bolts and M14 clamping nuts Standard issue two-colour version Ral 2002 orange red and metallic grey Without arm and folding or fork-shaped support post Fixed fork-shaped pedestal, also available in stainless steel inox version. Arm fitted with LEDs Smooth, silent operation The hydraulic operation of the arm is silent and smooth, with deceleration approaching closing end (variable interval) and opening when the arm is vertical (fixed deceleration). The force developed by the piston can be adjusted using the maximum hydraulic pressure regulators during opening and closing. A compression spring facilitates arm ascent operations even in manual release situations consequent to electric power failure. The Bayt 980 is provided: - complete with installation and maintenance instructions - calibrated and tested to suit the specific application - right- or left-handed operation - two-colour paint or AISI 304 stainless steel inox version (contains stainless steel internal structural and operative components). Oil-hydraulic road traffic barrier BAYT 980 Each individual Bayt 980 component is developed, checked and tested in the Meccanica Fadini factories to guarantee the product’s quality and professional standard. Electric motor The Bayt 980 operator is a road barrier used to prevent and completely restrict the full width of any driveway or road access. Oil-hydraulic main unit Closed stainless steel support post with lock and MIRI 4 flashing light. Stainless steel inox right-hand version Operation connector with 8 clamping screws suitable for R532 aluminium profile. Standard issue indicator light Bayt 980 electrically powered Stainless steel inox version with fence and Miri 4 flashing light. Designed for continuous use The Bayt 980 road barrier features innovative components and is designed for use in circumstances requiring heavy duty performance, guaranteeing a reliability quality standard that represents the operator’s distinguishing feature. Internal arm joint terminal in pressure-cast aluminium A single compact body The product’s structure includes a painted, treated steel plate support post, with a shaped, reinforced interior housing the electronic management programmer and the motor-main unit –hydraulic piston - compression spring unit. This unit is assembled as a single compact body, making the Bayt 980 practical and reliable, without loose components requiring difficult installation and maintenance operations. Two-colour painted version of Bayt 980 with fence and Polo 44 photoelectric cells. Bayt 980 right-hand version with Visual 344 modular accessory post Arm profile R532 Bayt 980 with Polo 44 photoelectric cells on support post and Geco 9 token-operated control device. Arm profile R532 New arm section With its elliptical section, the entire length of the anodised aluminium arm is devoid of dangerous edges, to guarantee total safety. The section also includes a lower runner for the optional installation of aluminium fences (barrier attached below the arm) or rubber safety strips. The arm is provided in two separate lengths (3.20 and 2.10 metres), for connection with an inner expansion joint that makes it possible to cover any carriageway width. In order to make the barrier visible at night, the following accessories are available: - as standard issue, red reflective adhesive strips to be applied on the arm - as an optional, flashing red LEDs, to be fitted to the entire length of the arm (request upon ordering). The moving arm has a fixed fork-shaped or folding pedestal. The barrier action is guaranteed by the rotation of the arm. Articulated arms are available subject to specific request for access to covered areas and underground garages. A hinge-mounted painted and treated steel sheet door grants access to the components inside when using a customized toothed key. A voltage cut out switch is supplied as standard issue in order to interrupt the power supply to the programmer inside when the door is opened. A treated and painted aluminium cover covers the top of the support post housing the limit switches and designed for the installation of the Miri 4 flashing light. Installation requires prior cement embedding of the anchorage base with brackets screwed in and protruding for the subsequent clamping to the Bayt 980 operator. Voltage cut-out Stainless steel inox support post New elliptical section. Standard issue colours Ral 2002 orange red and metallic grey Stainless steel inox A surcharge will be applied for RAL colour orders differing from standard issue colours. Standard production 4.20 metre arm 6.40 metre arm 6.40 metre arm 8.50 metre arm with fence with fence Painted support post with MIRI 4 flashing light, with 40 Kg counterweight and fence applied to arm. Opening times 4 seconds 8 seconds 14 seconds 19 seconds Cabinet with customized key to open the door, aluminium cover, fitted with plugs and holes for Polo 44 installation and Prit 19 Runner for the installation of fences or rubber profile. Fastening terminal for joining two pieces of R532 arm. 8.0 metre righthanded Bayt 980 with reinforcement ropes, counterweights and painted support post. Also available in stainless steel inox version. Each BAYT 980 code article includes: Main-unit-Piston-Compression spring unit for 90° arm raising, type “COS 982” ELPRO 10 PLUS series electronic programmer Electric system connected to arm limit switch, electric motor, circuit breaker Circuit breakers with forced interruption and earthed power cable R532 aluminium arm connection with 8 bolts. Fixing plate with galvanised log bolts and M14 clamping nuts Standard issue two-colour version Ral 2002 orange red and metallic grey Without arm and folding or fork-shaped support post Fixed fork-shaped pedestal, also available in stainless steel inox version. Arm fitted with LEDs Smooth, silent operation The hydraulic operation of the arm is silent and smooth, with deceleration approaching closing end (variable interval) and opening when the arm is vertical (fixed deceleration). The force developed by the piston can be adjusted using the maximum hydraulic pressure regulators during opening and closing. A compression spring facilitates arm ascent operations even in manual release situations consequent to electric power failure. The Bayt 980 is provided: - complete with installation and maintenance instructions - calibrated and tested to suit the specific application - right- or left-handed operation - two-colour paint or AISI 304 stainless steel inox version (contains stainless steel internal structural and operative components). Oil-hydraulic road traffic barrier BAYT 980 Each individual Bayt 980 component is developed, checked and tested in the Meccanica Fadini factories to guarantee the product’s quality and professional standard. Electric motor The Bayt 980 operator is a road barrier used to prevent and completely restrict the full width of any driveway or road access. Oil-hydraulic main unit Closed stainless steel support post with lock and MIRI 4 flashing light. Stainless steel inox right-hand version Operation connector with 8 clamping screws suitable for R532 aluminium profile. Standard issue indicator light Bayt 980 electrically powered Stainless steel inox version with fence and Miri 4 flashing light. Designed for continuous use The Bayt 980 road barrier features innovative components and is designed for use in circumstances requiring heavy duty performance, guaranteeing a reliability quality standard that represents the operator’s distinguishing feature. Internal arm joint terminal in pressure-cast aluminium A single compact body The product’s structure includes a painted, treated steel plate support post, with a shaped, reinforced interior housing the electronic management programmer and the motor-main unit –hydraulic piston - compression spring unit. This unit is assembled as a single compact body, making the Bayt 980 practical and reliable, without loose components requiring difficult installation and maintenance operations. Two-colour painted version of Bayt 980 with fence and Polo 44 photoelectric cells. Bayt 980 right-hand version with Visual 344 modular accessory post Arm profile R532 Bayt 980 with Polo 44 photoelectric cells on support post and Geco 9 token-operated control device. Arm profile R532 New arm section With its elliptical section, the entire length of the anodised aluminium arm is devoid of dangerous edges, to guarantee total safety. The section also includes a lower runner for the optional installation of aluminium fences (barrier attached below the arm) or rubber safety strips. The arm is provided in two separate lengths (3.20 and 2.10 metres), for connection with an inner expansion joint that makes it possible to cover any carriageway width. In order to make the barrier visible at night, the following accessories are available: - as standard issue, red reflective adhesive strips to be applied on the arm - as an optional, flashing red LEDs, to be fitted to the entire length of the arm (request upon ordering). The moving arm has a fixed fork-shaped or folding pedestal. The barrier action is guaranteed by the rotation of the arm. Articulated arms are available subject to specific request for access to covered areas and underground garages. A hinge-mounted painted and treated steel sheet door grants access to the components inside when using a customized toothed key. A voltage cut out switch is supplied as standard issue in order to interrupt the power supply to the programmer inside when the door is opened. A treated and painted aluminium cover covers the top of the support post housing the limit switches and designed for the installation of the Miri 4 flashing light. Installation requires prior cement embedding of the anchorage base with brackets screwed in and protruding for the subsequent clamping to the Bayt 980 operator. Voltage cut-out Stainless steel inox support post New elliptical section. Standard issue colours Ral 2002 orange red and metallic grey Stainless steel inox A surcharge will be applied for RAL colour orders differing from standard issue colours. Standard production 4.20 metre arm 6.40 metre arm 6.40 metre arm 8.50 metre arm with fence with fence Painted support post with MIRI 4 flashing light, with 40 Kg counterweight and fence applied to arm. Opening times 4 seconds 8 seconds 14 seconds 19 seconds Cabinet with customized key to open the door, aluminium cover, fitted with plugs and holes for Polo 44 installation and Prit 19 Runner for the installation of fences or rubber profile. Fastening terminal for joining two pieces of R532 arm. 8.0 metre righthanded Bayt 980 with reinforcement ropes, counterweights and painted support post. Also available in stainless steel inox version. Each BAYT 980 code article includes: Main-unit-Piston-Compression spring unit for 90° arm raising, type “COS 982” ELPRO 10 PLUS series electronic programmer Electric system connected to arm limit switch, electric motor, circuit breaker Circuit breakers with forced interruption and earthed power cable R532 aluminium arm connection with 8 bolts. Fixing plate with galvanised log bolts and M14 clamping nuts Standard issue two-colour version Ral 2002 orange red and metallic grey Without arm and folding or fork-shaped support post Fixed fork-shaped pedestal, also available in stainless steel inox version. Arm fitted with LEDs BAYT 980 Oil-hydraulic road traffic barrier Electric motor Opening key 0.37KW (0.5HP) 230V 50Hz 2.4A 510 W 20 µF 1˙350 rev./1’ S3 Oil-hydraulic main unit Mean operating pressure Maximum pressure dispensed Hydraulic oil Tank volume Aluminium removable cover painted, metallic grey version Plaque specifying Bayt 980 type and model 12-2007 Output Power supply voltage Frequency Absorbed current Consumption power Capacitor Motor turning speed Intermittent service Optional LEDs applied on arm in holes provided 2MPa (20bar) 4MPa (40bar) Oil Fadini A 15 by Agip 2.5 litres 22.5 Kg -20°C +80°C IP 673 Static weight of the Main Unit-Piston unit Operating temperature Protection Class Other Features Weight of complete Bayt 980 support post Support post colour Colour of cover and door Complete cycles continuous service Opening-Dwell-Closing Cycles per year (8 hours’service per day) 75 Kg RAL 2002 orange red metallic grey BAYT 980 Oil-hydraulic Road Traffic Barrier No. 180/hour BAYT 980 painted version No. 525˙000 BAYT 980 stainless steel version inox A surcharge will be applied for RAL colour orders differing from standard issue colours. 385 360 R5 32 Designed to house Prit 19 key switch BAYT 900 AR M 980 354 Front 30 4 65 305 View with R532 arm connection on left-handed Bayt 980 Forced voltage cut-out R532 aluminium arm with reflective adhesive strips, provided in modules to be joined together with a dedicated joining terminal. Subject to request the arm is provided with LEDs Arm length is established upon ordering Folding support with adjustable foot Via Mantova, 177/A - 37053 Cerea (Verona) Italy Tel. +39 0442 330422 r.a. - Fax +39 0442 331054 e-mail: info@fadini.net - www.fadini.net 350 305 135 415 Lateral view photoelectric cell side We recommend that installation complies with applicable regulations, the instructions enclosed and EN 12453 and EN 12445 standards in observance of essential EC requisites Painted (RAL 2002) steel support post with electronic programmer, operation connection rod, springloaded piston, oil-hydraulic main unit and electric motor. UM 50 BAYT 350 Designed for Polo 44 photoelectric cell installation Operation piston Earthed steel door with lock Metallic grey paint INI 980 500 Support post with R532 arm applied and designed for photoelectric cells with two holes on either side Polo 44 and Prit 19 key switch UM 1’090 Net length L 300 980 1’090 Interchangeable right- and lefthanded connecting rod Electronic programmer AL 100 Adjustable limit switch with spring-loader feeler Lateral view two-coloured door Anchorage plate 354x304 with M14x200 log bolts Directive 2003/108/EC Disposal of electric and electronic material DO NOT DISPOSE OF AS NORMAL WASTE HARMFUL TO THE ENVIRONMENT For Dealer’s use only The Manufacturer reserves the right to make changes to the product without giving notice GB BAYT 980 Oil-hydraulic road traffic barrier Electric motor Opening key 0.37KW (0.5HP) 230V 50Hz 2.4A 510 W 20 µF 1˙350 rev./1’ S3 Oil-hydraulic main unit Mean operating pressure Maximum pressure dispensed Hydraulic oil Tank volume Aluminium removable cover painted, metallic grey version Plaque specifying Bayt 980 type and model 12-2007 Output Power supply voltage Frequency Absorbed current Consumption power Capacitor Motor turning speed Intermittent service Optional LEDs applied on arm in holes provided 2MPa (20bar) 4MPa (40bar) Oil Fadini A 15 by Agip 2.5 litres 22.5 Kg -20°C +80°C IP 673 Static weight of the Main Unit-Piston unit Operating temperature Protection Class Other Features Weight of complete Bayt 980 support post Support post colour Colour of cover and door Complete cycles continuous service Opening-Dwell-Closing Cycles per year (8 hours’service per day) 75 Kg RAL 2002 orange red metallic grey BAYT 980 Oil-hydraulic Road Traffic Barrier No. 180/hour BAYT 980 painted version No. 525˙000 BAYT 980 stainless steel version inox A surcharge will be applied for RAL colour orders differing from standard issue colours. 385 360 R5 32 Designed to house Prit 19 key switch BAYT 900 AR M 980 354 Front 30 4 65 305 View with R532 arm connection on left-handed Bayt 980 Forced voltage cut-out R532 aluminium arm with reflective adhesive strips, provided in modules to be joined together with a dedicated joining terminal. Subject to request the arm is provided with LEDs Arm length is established upon ordering Folding support with adjustable foot Via Mantova, 177/A - 37053 Cerea (Verona) Italy Tel. +39 0442 330422 r.a. - Fax +39 0442 331054 e-mail: info@fadini.net - www.fadini.net 350 305 135 415 Lateral view photoelectric cell side We recommend that installation complies with applicable regulations, the instructions enclosed and EN 12453 and EN 12445 standards in observance of essential EC requisites Painted (RAL 2002) steel support post with electronic programmer, operation connection rod, springloaded piston, oil-hydraulic main unit and electric motor. UM 50 BAYT 350 Designed for Polo 44 photoelectric cell installation Operation piston Earthed steel door with lock Metallic grey paint INI 980 500 Support post with R532 arm applied and designed for photoelectric cells with two holes on either side Polo 44 and Prit 19 key switch UM 1’090 Net length L 300 980 1’090 Interchangeable right- and lefthanded connecting rod Electronic programmer AL 100 Adjustable limit switch with spring-loader feeler Lateral view two-coloured door Anchorage plate 354x304 with M14x200 log bolts Directive 2003/108/EC Disposal of electric and electronic material DO NOT DISPOSE OF AS NORMAL WASTE HARMFUL TO THE ENVIRONMENT For Dealer’s use only The Manufacturer reserves the right to make changes to the product without giving notice GB
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Page Count : 6 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:b3512d1a-a4cc-11dc-9951-0050e439fc48 Modify Date : 2007:12:07 14:59:56+01:00 Create Date : 2007:12:07 14:42:16+01:00 Metadata Date : 2007:12:07 14:59:56+01:00 Document ID : uuid:382c7526-a4ca-11dc-9951-0050e439fc48 Format : application/pdf Creator : Adobe InDesign CS2 (4.0.5) Producer : Adobe PDF Library 7.0EXIF Metadata provided by EXIF.tools