Bayt980
User Manual: bayt980
Open the PDF directly: View PDF 
.
Page Count: 6
BAYT 980
BAYT 980 painted version
BAYT 980 stainless steel version inox
Oil-hydraulic Road Traffic Barrier
Earthed steel door with lock
Metallic grey paint Folding
support with
adjustable foot
R532 aluminium arm with reflective
adhesive strips, provided in
modules to be joined together with
a dedicated joining terminal.
Subject to request the arm is
provided with LEDs
Arm length is established upon
ordering
Painted (RAL 2002) steel support
post with electronic programmer,
operation connection rod, spring-
loaded piston, oil-hydraulic main
unit and electric motor.
Support post with R532 arm applied and
designed for photoelectric cells with two
holes on either side Polo 44
and Prit 19 key switch
Optional LEDs applied on
arm in holes provided
Plaque specifying
Bayt 980 type and
model
Aluminium removable cover
painted, metallic grey version
Forced voltage cut-out
Operation piston
Opening key
Adjustable limit switch with
spring-loader feeler
Interchangeable right- and left-
handed connecting rod
Electronic programmer
Directive 2003/108/EC
Disposal of electric and electronic material
DO NOT DISPOSE OF AS NORMAL WASTE
HARMFUL TO THE ENVIRONMENT
Electric motor
Oil-hydraulic main unit
Other Features
Designed to house
Prit 19 key switch
Designed for Polo 44
photoelectric cell installation
BAYT 980 Oil-hydraulic road traffic barrier
GB
50
100
R532 ALUMINIUM ARM
View with R532
arm connection
on left-handed Bayt 980
300
Net length
L
350
385
360
Lateral view
photoelectric cell side
305
415
500
980
1’090
900
65
Anchorage plate 354x304
with M14x200 log bolts
354
Front
304
135
BAYT 980
BAYT 980
1
’
090
350
305
Lateral view
two-coloured door
For Dealer’s use only
The Manufacturer reserves the right to make changes to the product without giving notice
We recommend that installation complies with applicable regulations,
the instructions enclosed and EN 12453 and EN 12445 standards in
observance of essential EC requisites
12-2007
Via Mantova, 177/A - 37053 Cerea (Verona) Italy
Tel. +39 0442 330422 r.a. - Fax +39 0442 331054
e-mail: info@fadini.net - www.fadini.net
Output 0.37KW (0.5HP)
Power supply voltage 230V
Frequency 50Hz
Absorbed current 2.4A
Consumption power 510 W
Capacitor 20 µF
Motor turning speed 1˙350 rev./1’
Intermittent service S3
Mean operating pressure 2MPa (20bar)
Maximum pressure dispensed 4MPa (40bar)
Hydraulic oil Oil Fadini A 15 by Agip
Tank volume 2.5 litres
Static weight of the Main Unit-Piston unit 22.5 Kg
Operating temperature -20°C +80°C
Protection Class IP 673
Weight of complete Bayt 980 support post 75 Kg
Support post colour RAL 2002 orange red
Colour of cover and door metallic grey
Complete cycles continuous service
Opening-Dwell-Closing No. 180/hour
Cycles per year (8 hours’service per day)
No. 525˙000
A surcharge will be applied for RAL colour orders differing from standard issue colours.
The Bayt 980 operator is a road barrier used to prevent and completely restrict
the full width of any driveway or road access.
Designed for continuous use
The Bayt 980 road barrier features innovative components and is designed for
use in circumstances requiring heavy duty performance, guaranteeing a reli-
ability quality standard that represents the operator’s distinguishing feature.
A single compact body
The product’s structure includes a painted, treated steel plate support post,
with a shaped, reinforced interior housing the electronic management program-
mer and the motor-main unit –hydraulic piston - compression spring unit. This
unit is assembled as a single compact body, making the Bayt 980 practi-
cal and reliable, without loose components requiring difficult installation and
maintenance operations.
New arm section
With its elliptical section, the entire length of the anodised aluminium arm is
devoid of dangerous edges, to guarantee total safety.
The section also includes a lower runner for the optional installation of alumini-
um fences (barrier attached below the arm) or rubber safety strips.
The arm is provided in two separate lengths (3.20 and 2.10 metres), for con-
nection with an inner expansion joint that makes it possible to cover any car-
riageway width.
In order to make the barrier visible at night, the following accessories are avail-
able:
- as standard issue, red reflective adhesive strips to be applied on the arm
- as an optional, flashing red LEDs, to be fitted to the entire length of the
arm (request upon ordering).
The moving arm has a fixed fork-shaped or folding pedestal.
The barrier action is guaranteed by the rotation of the arm.
Articulated arms are available subject to specific request for access to covered
areas and underground garages.
A hinge-mounted painted and treated steel sheet door grants access to the
components inside when using a customized toothed key. A voltage cut out
switch is supplied as standard issue in order to interrupt the power supply to
the programmer inside when the door is opened.
A treated and painted aluminium cover covers the top of the support post
housing the limit switches and designed for the installation of the Miri 4 flash-
ing light. Installation requires prior cement embedding of the anchorage base
with brackets screwed in and protruding for the subsequent clamping to the
Bayt 980 operator.
BAYT 980
Oil-hydraulic road traffic barrier
Stainless steel inox version with fence and
Miri 4 flashing light.
Stainless steel inox support post
Each BAYT 980 code article includes:
Cabinet with customized key to open the door, aluminium cover, fitted with plugs and
holes for Polo 44 installation and Prit 19
Main-unit-Piston-Compression spring unit for 90° arm raising, type “COS 982”
ELPRO 10 PLUS series electronic programmer
Electric system connected to arm limit switch, electric motor, circuit breaker
Circuit breakers with forced interruption and earthed power cable
R532 aluminium arm connection with 8 bolts.
Fixing plate with galvanised log bolts and M14 clamping nuts
Standard issue two-colour version Ral 2002 orange red and metallic grey
Without arm and folding or fork-shaped support post
Standard production Opening times
4.20
metre arm
- 4 seconds
6.40
metre arm
- 8 seconds
6.40
metre arm with fence
14 seconds
8.50
metre arm with fence
19 seconds
Two-colour painted version
of Bayt 980 with fence and
Polo 44 photoelectric cells.
Bayt 980 right-hand version with
Visual 344 modular accessory post
Bayt 980 with Polo 44 photoelectric
cells on support post and Geco 9
token-operated control device.
Operation connector
with 8 clamping screws
suitable for R532
aluminium profile.
Fixed fork-shaped pedestal,
also available in stainless
steel inox version.
Painted support post with
MIRI 4 flashing light,
with 40 Kg counterweight
and fence applied to arm.
Fastening terminal for joining
two pieces of R532 arm.
8.0 metre right-
handed Bayt 980 with
reinforcement ropes,
counterweights and
painted support post.
Also available in
stainless steel inox
version.
Smooth, silent operation
The hydraulic operation of the arm is silent and smooth, with deceleration approaching clos-
ing end (variable interval) and opening when the arm is vertical (fixed deceleration).
The force developed by the piston can be adjusted using the maximum hydraulic pres-
sure regulators during opening and closing.
A compression spring facilitates arm ascent operations even in manual release situations
consequent to electric power failure.
The Bayt 980 is provided:
- complete with installation and maintenance instructions
- calibrated and tested to suit the specific application
- right- or left-handed operation
- two-colour paint or AISI 304 stainless steel inox version (contains stainless steel
internal structural and operative components).
Each individual Bayt 980 component is developed, checked and tested in the
Meccanica Fadini factories to guarantee the product’s quality and professional standard.
Standard issue colours
Ral 2002 orange red and metallic grey
Stainless steel inox
A surcharge will be applied for RAL colour orders differing from standard issue colours.
New elliptical
section.
Runner for the
installation of
fences or rubber
profile.
Arm fitted with LEDs
Voltage cut-out
Internal arm joint terminal
in pressure-cast aluminium
Arm
profile
R532
Closed stainless steel support post
with lock and MIRI 4 flashing light.
Stainless steel inox right-hand version
Electric
motor Oil-hydraulic
main unit
Arm
profile
R532
Standard issue
indicator light
Bayt 980 electrically
powered
The Bayt 980 operator is a road barrier used to prevent and completely restrict
the full width of any driveway or road access.
Designed for continuous use
The Bayt 980 road barrier features innovative components and is designed for
use in circumstances requiring heavy duty performance, guaranteeing a reli-
ability quality standard that represents the operator’s distinguishing feature.
A single compact body
The product’s structure includes a painted, treated steel plate support post,
with a shaped, reinforced interior housing the electronic management program-
mer and the motor-main unit –hydraulic piston - compression spring unit. This
unit is assembled as a single compact body, making the Bayt 980 practi-
cal and reliable, without loose components requiring difficult installation and
maintenance operations.
New arm section
With its elliptical section, the entire length of the anodised aluminium arm is
devoid of dangerous edges, to guarantee total safety.
The section also includes a lower runner for the optional installation of alumini-
um fences (barrier attached below the arm) or rubber safety strips.
The arm is provided in two separate lengths (3.20 and 2.10 metres), for con-
nection with an inner expansion joint that makes it possible to cover any car-
riageway width.
In order to make the barrier visible at night, the following accessories are avail-
able:
- as standard issue, red reflective adhesive strips to be applied on the arm
- as an optional, flashing red LEDs, to be fitted to the entire length of the
arm (request upon ordering).
The moving arm has a fixed fork-shaped or folding pedestal.
The barrier action is guaranteed by the rotation of the arm.
Articulated arms are available subject to specific request for access to covered
areas and underground garages.
A hinge-mounted painted and treated steel sheet door grants access to the
components inside when using a customized toothed key. A voltage cut out
switch is supplied as standard issue in order to interrupt the power supply to
the programmer inside when the door is opened.
A treated and painted aluminium cover covers the top of the support post
housing the limit switches and designed for the installation of the Miri 4 flash-
ing light. Installation requires prior cement embedding of the anchorage base
with brackets screwed in and protruding for the subsequent clamping to the
Bayt 980 operator.
BAYT 980
Oil-hydraulic road traffic barrier
Stainless steel inox version with fence and
Miri 4 flashing light.
Stainless steel inox support post
Each BAYT 980 code article includes:
Cabinet with customized key to open the door, aluminium cover, fitted with plugs and
holes for Polo 44 installation and Prit 19
Main-unit-Piston-Compression spring unit for 90° arm raising, type “COS 982”
ELPRO 10 PLUS series electronic programmer
Electric system connected to arm limit switch, electric motor, circuit breaker
Circuit breakers with forced interruption and earthed power cable
R532 aluminium arm connection with 8 bolts.
Fixing plate with galvanised log bolts and M14 clamping nuts
Standard issue two-colour version Ral 2002 orange red and metallic grey
Without arm and folding or fork-shaped support post
Standard production Opening times
4.20
metre arm
- 4 seconds
6.40
metre arm
- 8 seconds
6.40
metre arm with fence
14 seconds
8.50
metre arm with fence
19 seconds
Two-colour painted version
of Bayt 980 with fence and
Polo 44 photoelectric cells.
Bayt 980 right-hand version with
Visual 344 modular accessory post
Bayt 980 with Polo 44 photoelectric
cells on support post and Geco 9
token-operated control device.
Operation connector
with 8 clamping screws
suitable for R532
aluminium profile.
Fixed fork-shaped pedestal,
also available in stainless
steel inox version.
Painted support post with
MIRI 4 flashing light,
with 40 Kg counterweight
and fence applied to arm.
Fastening terminal for joining
two pieces of R532 arm.
8.0 metre right-
handed Bayt 980 with
reinforcement ropes,
counterweights and
painted support post.
Also available in
stainless steel inox
version.
Smooth, silent operation
The hydraulic operation of the arm is silent and smooth, with deceleration approaching clos-
ing end (variable interval) and opening when the arm is vertical (fixed deceleration).
The force developed by the piston can be adjusted using the maximum hydraulic pres-
sure regulators during opening and closing.
A compression spring facilitates arm ascent operations even in manual release situations
consequent to electric power failure.
The Bayt 980 is provided:
- complete with installation and maintenance instructions
- calibrated and tested to suit the specific application
- right- or left-handed operation
- two-colour paint or AISI 304 stainless steel inox version (contains stainless steel
internal structural and operative components).
Each individual Bayt 980 component is developed, checked and tested in the
Meccanica Fadini factories to guarantee the product’s quality and professional standard.
Standard issue colours
Ral 2002 orange red and metallic grey
Stainless steel inox
A surcharge will be applied for RAL colour orders differing from standard issue colours.
New elliptical
section.
Runner for the
installation of
fences or rubber
profile.
Arm fitted with LEDs
Voltage cut-out
Internal arm joint terminal
in pressure-cast aluminium
Arm
profile
R532
Closed stainless steel support post
with lock and MIRI 4 flashing light.
Stainless steel inox right-hand version
Electric
motor Oil-hydraulic
main unit
Arm
profile
R532
Standard issue
indicator light
Bayt 980 electrically
powered
The Bayt 980 operator is a road barrier used to prevent and completely restrict
the full width of any driveway or road access.
Designed for continuous use
The Bayt 980 road barrier features innovative components and is designed for
use in circumstances requiring heavy duty performance, guaranteeing a reli-
ability quality standard that represents the operator’s distinguishing feature.
A single compact body
The product’s structure includes a painted, treated steel plate support post,
with a shaped, reinforced interior housing the electronic management program-
mer and the motor-main unit –hydraulic piston - compression spring unit. This
unit is assembled as a single compact body, making the Bayt 980 practi-
cal and reliable, without loose components requiring difficult installation and
maintenance operations.
New arm section
With its elliptical section, the entire length of the anodised aluminium arm is
devoid of dangerous edges, to guarantee total safety.
The section also includes a lower runner for the optional installation of alumini-
um fences (barrier attached below the arm) or rubber safety strips.
The arm is provided in two separate lengths (3.20 and 2.10 metres), for con-
nection with an inner expansion joint that makes it possible to cover any car-
riageway width.
In order to make the barrier visible at night, the following accessories are avail-
able:
- as standard issue, red reflective adhesive strips to be applied on the arm
- as an optional, flashing red LEDs, to be fitted to the entire length of the
arm (request upon ordering).
The moving arm has a fixed fork-shaped or folding pedestal.
The barrier action is guaranteed by the rotation of the arm.
Articulated arms are available subject to specific request for access to covered
areas and underground garages.
A hinge-mounted painted and treated steel sheet door grants access to the
components inside when using a customized toothed key. A voltage cut out
switch is supplied as standard issue in order to interrupt the power supply to
the programmer inside when the door is opened.
A treated and painted aluminium cover covers the top of the support post
housing the limit switches and designed for the installation of the Miri 4 flash-
ing light. Installation requires prior cement embedding of the anchorage base
with brackets screwed in and protruding for the subsequent clamping to the
Bayt 980 operator.
BAYT 980
Oil-hydraulic road traffic barrier
Stainless steel inox version with fence and
Miri 4 flashing light.
Stainless steel inox support post
Each BAYT 980 code article includes:
Cabinet with customized key to open the door, aluminium cover, fitted with plugs and
holes for Polo 44 installation and Prit 19
Main-unit-Piston-Compression spring unit for 90° arm raising, type “COS 982”
ELPRO 10 PLUS series electronic programmer
Electric system connected to arm limit switch, electric motor, circuit breaker
Circuit breakers with forced interruption and earthed power cable
R532 aluminium arm connection with 8 bolts.
Fixing plate with galvanised log bolts and M14 clamping nuts
Standard issue two-colour version Ral 2002 orange red and metallic grey
Without arm and folding or fork-shaped support post
Standard production Opening times
4.20
metre arm
- 4 seconds
6.40
metre arm
- 8 seconds
6.40
metre arm with fence
14 seconds
8.50
metre arm with fence
19 seconds
Two-colour painted version
of Bayt 980 with fence and
Polo 44 photoelectric cells.
Bayt 980 right-hand version with
Visual 344 modular accessory post
Bayt 980 with Polo 44 photoelectric
cells on support post and Geco 9
token-operated control device.
Operation connector
with 8 clamping screws
suitable for R532
aluminium profile.
Fixed fork-shaped pedestal,
also available in stainless
steel inox version.
Painted support post with
MIRI 4 flashing light,
with 40 Kg counterweight
and fence applied to arm.
Fastening terminal for joining
two pieces of R532 arm.
8.0 metre right-
handed Bayt 980 with
reinforcement ropes,
counterweights and
painted support post.
Also available in
stainless steel inox
version.
Smooth, silent operation
The hydraulic operation of the arm is silent and smooth, with deceleration approaching clos-
ing end (variable interval) and opening when the arm is vertical (fixed deceleration).
The force developed by the piston can be adjusted using the maximum hydraulic pres-
sure regulators during opening and closing.
A compression spring facilitates arm ascent operations even in manual release situations
consequent to electric power failure.
The Bayt 980 is provided:
- complete with installation and maintenance instructions
- calibrated and tested to suit the specific application
- right- or left-handed operation
- two-colour paint or AISI 304 stainless steel inox version (contains stainless steel
internal structural and operative components).
Each individual Bayt 980 component is developed, checked and tested in the
Meccanica Fadini factories to guarantee the product’s quality and professional standard.
Standard issue colours
Ral 2002 orange red and metallic grey
Stainless steel inox
A surcharge will be applied for RAL colour orders differing from standard issue colours.
New elliptical
section.
Runner for the
installation of
fences or rubber
profile.
Arm fitted with LEDs
Voltage cut-out
Internal arm joint terminal
in pressure-cast aluminium
Arm
profile
R532
Closed stainless steel support post
with lock and MIRI 4 flashing light.
Stainless steel inox right-hand version
Electric
motor Oil-hydraulic
main unit
Arm
profile
R532
Standard issue
indicator light
Bayt 980 electrically
powered
BAYT 980
BAYT 980 painted version
BAYT 980 stainless steel version inox
Oil-hydraulic Road Traffic Barrier
Earthed steel door with lock
Metallic grey paint Folding
support with
adjustable foot
R532 aluminium arm with reflective
adhesive strips, provided in
modules to be joined together with
a dedicated joining terminal.
Subject to request the arm is
provided with LEDs
Arm length is established upon
ordering
Painted (RAL 2002) steel support
post with electronic programmer,
operation connection rod, spring-
loaded piston, oil-hydraulic main
unit and electric motor.
Support post with R532 arm applied and
designed for photoelectric cells with two
holes on either side Polo 44
and Prit 19 key switch
Optional LEDs applied on
arm in holes provided
Plaque specifying
Bayt 980 type and
model
Aluminium removable cover
painted, metallic grey version
Forced voltage cut-out
Operation piston
Opening key
Adjustable limit switch with
spring-loader feeler
Interchangeable right- and left-
handed connecting rod
Electronic programmer
Directive 2003/108/EC
Disposal of electric and electronic material
DO NOT DISPOSE OF AS NORMAL WASTE
HARMFUL TO THE ENVIRONMENT
Electric motor
Oil-hydraulic main unit
Other Features
Designed to house
Prit 19 key switch
Designed for Polo 44
photoelectric cell installation
BAYT 980 Oil-hydraulic road traffic barrier
GB
50
100
R532 ALUMINIUM ARM
View with R532
arm connection
on left-handed Bayt 980
300
Net length
L
350
385
360
Lateral view
photoelectric cell side
305
415
500
980
1’090
900
65
Anchorage plate 354x304
with M14x200 log bolts
354
Front
304
135
BAYT 980
BAYT 980
1
’
090
350
305
Lateral view
two-coloured door
For Dealer’s use only
The Manufacturer reserves the right to make changes to the product without giving notice
We recommend that installation complies with applicable regulations,
the instructions enclosed and EN 12453 and EN 12445 standards in
observance of essential EC requisites
12-2007
Via Mantova, 177/A - 37053 Cerea (Verona) Italy
Tel. +39 0442 330422 r.a. - Fax +39 0442 331054
e-mail: info@fadini.net - www.fadini.net
Output 0.37KW (0.5HP)
Power supply voltage 230V
Frequency 50Hz
Absorbed current 2.4A
Consumption power 510 W
Capacitor 20 µF
Motor turning speed 1˙350 rev./1’
Intermittent service S3
Mean operating pressure 2MPa (20bar)
Maximum pressure dispensed 4MPa (40bar)
Hydraulic oil Oil Fadini A 15 by Agip
Tank volume 2.5 litres
Static weight of the Main Unit-Piston unit 22.5 Kg
Operating temperature -20°C +80°C
Protection Class IP 673
Weight of complete Bayt 980 support post 75 Kg
Support post colour RAL 2002 orange red
Colour of cover and door metallic grey
Complete cycles continuous service
Opening-Dwell-Closing No. 180/hour
Cycles per year (8 hours’service per day)
No. 525˙000
A surcharge will be applied for RAL colour orders differing from standard issue colours.
BAYT 980
BAYT 980 painted version
BAYT 980 stainless steel version inox
Oil-hydraulic Road Traffic Barrier
Earthed steel door with lock
Metallic grey paint Folding
support with
adjustable foot
R532 aluminium arm with reflective
adhesive strips, provided in
modules to be joined together with
a dedicated joining terminal.
Subject to request the arm is
provided with LEDs
Arm length is established upon
ordering
Painted (RAL 2002) steel support
post with electronic programmer,
operation connection rod, spring-
loaded piston, oil-hydraulic main
unit and electric motor.
Support post with R532 arm applied and
designed for photoelectric cells with two
holes on either side Polo 44
and Prit 19 key switch
Optional LEDs applied on
arm in holes provided
Plaque specifying
Bayt 980 type and
model
Aluminium removable cover
painted, metallic grey version
Forced voltage cut-out
Operation piston
Opening key
Adjustable limit switch with
spring-loader feeler
Interchangeable right- and left-
handed connecting rod
Electronic programmer
Directive 2003/108/EC
Disposal of electric and electronic material
DO NOT DISPOSE OF AS NORMAL WASTE
HARMFUL TO THE ENVIRONMENT
Electric motor
Oil-hydraulic main unit
Other Features
Designed to house
Prit 19 key switch
Designed for Polo 44
photoelectric cell installation
BAYT 980 Oil-hydraulic road traffic barrier
GB
50
100
R532 ALUMINIUM ARM
View with R532
arm connection
on left-handed Bayt 980
300
Net length
L
350
385
360
Lateral view
photoelectric cell side
305
415
500
980
1’090
900
65
Anchorage plate 354x304
with M14x200 log bolts
354
Front
304
135
BAYT 980
BAYT 980
1
’
090
350
305
Lateral view
two-coloured door
For Dealer’s use only
The Manufacturer reserves the right to make changes to the product without giving notice
We recommend that installation complies with applicable regulations,
the instructions enclosed and EN 12453 and EN 12445 standards in
observance of essential EC requisites
12-2007
Via Mantova, 177/A - 37053 Cerea (Verona) Italy
Tel. +39 0442 330422 r.a. - Fax +39 0442 331054
e-mail: info@fadini.net - www.fadini.net
Output 0.37KW (0.5HP)
Power supply voltage 230V
Frequency 50Hz
Absorbed current 2.4A
Consumption power 510 W
Capacitor 20 µF
Motor turning speed 1˙350 rev./1’
Intermittent service S3
Mean operating pressure 2MPa (20bar)
Maximum pressure dispensed 4MPa (40bar)
Hydraulic oil Oil Fadini A 15 by Agip
Tank volume 2.5 litres
Static weight of the Main Unit-Piston unit 22.5 Kg
Operating temperature -20°C +80°C
Protection Class IP 673
Weight of complete Bayt 980 support post 75 Kg
Support post colour RAL 2002 orange red
Colour of cover and door metallic grey
Complete cycles continuous service
Opening-Dwell-Closing No. 180/hour
Cycles per year (8 hours’service per day)
No. 525˙000
A surcharge will be applied for RAL colour orders differing from standard issue colours.
