Configurator PRIMERGY BX2560 M1 BX600 Cnfg BX2560M1
User Manual: PRIMERGY BX600
Open the PDF directly: View PDF 
.
Page Count: 15
| Download | |
| Open PDF In Browser | View PDF |
PRIMERGY BX2560 M1 System configurator and order-information guide Contents Instructions Configuration diagram Configurator 10 11 12 13 14 15 X XI XII XIII XIV XV BX2560 M1 Dual Socket Processor Storage Memory iRMC S4, Graphics Mezzanine Cards 16 PRIMERGY Server 20 21 System configurator and order-information guide PRIMERGY BX2560 M1 Status: 2016-04-01 Instructions This document contains basic product and configuration information that will enable you to configure your system via System-Architect. Only the tool "System-Arcitect" will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system. Please pay attention to the naming conventions: BX2560 M1 Dual Server Blade M1 You can configure your individual PRIMERGY server in order to adjust your specific requirements. The System configurator is divided into several chapters that are identical to the current price list and PC-/ System-Architect. Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through the configurator by following the lines from the top to the bottom. Section IV Memory, example There are 3 free memory banks available. The memory banks can be populated with 512MB, 1GB, 2GB and 4GB DDR Memory. The maximum total amount of memory is 12GB. It is possible to select memory upgrade options up to 3 times. ECC with memory scrubbing-function and hot-spare memorybank is standard on the PRIMERGY BX600 S2 Server Blades. S26361-XXX-XXX Memory XXX MB S26361-XXX-XXX Memory XXX MB max. X times per system max. X times per system X times In one chapter you can only select as many components (here 3x) as the arrow indicates. 3x Please note that there are information symbols which indicate necessary information. For further information see: http://ts.fujitsu.com/products/standard_servers/index.html (internet) https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/Pages/Currentconfigurators.aspx (extranet) Prices and availability see price list and PC-/ System-Architect Subject to change and errors excepted Fujitsu Technology Solutions x86 PRIMERGY Server 2 of 15 System configurator and order-information guide PRIMERGY BX2560 M1 Status: 2016-04-01 Configuration diagram Dual Server Blade BX2560 M1 CPU1 Row 1 (4 DIMMS) Row 2 (4 DIMMS) Intel CPU CPU2 Row 1 (4 DIMMS) Intel CPU Row 2 (4 DIMMS) Mezzanine slot 1 FC Mezz. card 1/10 GbE Mezz. card IB Mezz. card CNA Mezz. Card or unpopulated Mezzanine slot 2 FC Mezz. card 1/10 GbE Mezz. card IB Mezz. card CNA Mezz. Card SAS Mezz. Card or unpopulated upper SAS 2.5" or HDD dummy frame lower SAS 2.5" or HDD dummy frame Disk drives LSI HW Raid Ctrl. Flash Backup Unit SATADOM UFM Processor Memory Mezzanine slot Storage Options Key: Included in basic unit Option The population order for the CPU is: CPU1 first, then CPU2 The population order for the DIMMs: for each CPU, the DIMM row 1 (DIMMS 1A 1B 1C 1D) (DIMMS1E 1F 1G 1H) first, then row 2 (DIMMs 2A 2B 2C 2D) (DIMMs 2E 2F 2G 2H) Fujitsu Technology Solutions x86 PRIMERGY Server 3 of 15 System configurator and order-information guide PRIMERGY BX2560 M1 Status: 2016-04-01 D Section X Dual Socket Server Blade BX2560 M1 Server Blade with: - Dual INTEL E5-26xxv3 Processor Support - The base units with INTEL C610 chipset - onbaord controller for SATA - 16 DIMM sockets, organized in 2 DPC for each CPU (8 DIMMs per CPU) - 1x Dual channel 10 Gbit Ethernet CNA controller on-board - 2 bays for optional hot plug 2.5" SATA/ SAS HDD/ SSD or PCIe SSD - iRMC S4 on-board - Special connector for Y-cable (4x USB, 1 x serial 1x VGA). The BX2560 M1 Server Blade can be installed max. 18x in the BX900 System Unit The BX2560 M1 Server Blade can be installed max. 8x in the BX400 System Unit S26361-K1466-V200 S26361-F4478-L2 PY BX900 Y-Cable frontside PY BX2560 M1 Dual Server Blade 18x up to 2x 2.5" hot plug drives. Dual Server Blade Base Unit without for KVM connection to CPU and without memory modules! 2x USB, 1x VGA, 1x seriell Server Blade For CPU and Memory configuration see below Max. 18x per BX900 System Unit. Max. 8x per BX400 System Unit. S26361-F3552-E6 TPM Module Trusted Platform Module on motherboard PY TPM Module Be aware of import restrictions! Max. 1x per Server Blade. S26361-F1790-E310 embedded Lifecycle Manager (eLCM) SD-Card (min. Class 10) SD-Card connected to iRMC to support e.g. Backup/Restore function, eLCM, etc. Max. 1x per Server Blade. Following USB Components are available 1) USB DVD SM / Blu-Ray External Blu-Ray Drive (as soon as available) S26341-F103-L120 2) USB Mouse: S26381-K415-L100 Optical Wheel Mouse Tilt USB/PS2 3) USB Memorybird: MyUSBS MyUSB P910 A9108GB 8GB, (as MLC soon Flash as available) S26391-F6048-L208 MyUSBS MyUSB P910 A9108GB 16GB, (asMLC soonFlash as available) S26391-F6048-L216 S26361-F2749-E1 S26361-F2749-E2 Service for Server Blade installation in the System Unit. Server Blade individually packed / delivered. Hereby the BX900 S1 will be delivered completely The Server Blade is not built in a BX900 S1, configured and tested with Server Blades integrated. it is separately tested and delivered. This order number must be in the same order as the System Unit itself. min. 1x per System Unit; max. 18x per System Unit; max. 1x per Server Blade Contains ServerStart CD max. 1x per Server Blade E Fujitsu Technology Solutions x86 PRIMERGY Server 4 of 15 System configurator and order-information guide PRIMERGY BX2560 M1 Status: 2016-04-01 E XI Section Processor There are 2 processor sockets available. The first socket must always be equipped with the first CPU which can be selected via configurator Two processors with different clock frequencies are not possible For CPU types E5-2637v3, E5-2643v3, E5-2667v3, E5-2697v3 and E5-2699v3 a larger heat sink is necessary for first CPU due to thermal conditions. This leads to a limitation of CPU1´s memory array to 6 DIMM modules. This follows the memory array of a single CPU configuration is limited to 6 DIMM modules and the memory array of a dual CPU configuration is limited to 14 DIMM modules. Max. two CPU`s can be selected per basic unit One of following CPU´s can be selected once (only as first CPU) for an orderable basic unit Optional second CPU has to be the same type like the first CPU Xeon E5-2600v3 (R) Basic - 1x 64-bit Intel Xeon (15MB Smart Cache) 1600 MHz DDR4 Bus; 6.4 GT/s QPI Bus occupies socket for one CPU Xeon E5-2603v3 6C/6T 1.60GHz 15MB 6.4GT/s 1600MHz 85W Xeon E5-2609v3 6C/6T 1.90GHz 15MB 6.4GT/s 1600MHz 85W Xeon E5-2600v3 (R) Standard - 1x 64-bit Intel Xeon (15/20MB Smart Cache); Hyper-Threading (HT); 1866 MHz DDR4 Bus; 8.0 GT/s QPI Bus occupies socket for one CPU Xeon E5-2620v3 6C/12T 2.40GHz 15MB 8.0GT/s 1866MHz 85W Xeon E5-2630v3 8C/16T 2.40GHz 20MB 8.0GT/s 1866MHz 85W Xeon E5-2640v3 8C/16T 2.60GHz 20MB 8.0GT/s 1866MHz 90W Xeon E5-2600v3 (R) Advanced - 1x 64-bit Intel Xeon (25/30MB Smart Cache); Hyper-Threading (HT); 2133 MHz DDR4 Bus; 9.6 GT/s QPI Bus occupies socket for one CPU Xeon E5-2650v3 10C/20T 2.30GHz 25MB 9.6GT/s 2133MHz 105W Xeon E5-2600v3 (R) Frequency Optimized - 1x 64-bit Intel Xeon (10-20MB Smart Cache); Hyper-Threading (HT); S26361-F3849-E103 S26361-F3849-E109 Max. DDR4 Bus Speed depends on: - max. DDR4 Bus Speed from the CPU and - max. DDR4 Memory Speed and - max. memory modules on one memory channel For CPUs which do not offer 1866 MHz support, (Basic, Standard & Low Power class), System Architect will not offer memory modules supporting this frequency. S26361-F3849-E120 S26361-F3849-E130 S26361-F3849-E140 S26361-F3849-E150 1866 & 2133 MHz DDR4 Bus; 8.0 & 9.6 GT/s QPI Bus occupies socket for one CPU Xeon E5-2623v3 4C/8T 3.00GHz 10MB 8.0GT/s 1866MHz 105W Xeon E5-2600v3 (R) Advanced - 1x 64-bit Intel Xeon (25/30MB Smart Cache); Hyper-Threading (HT); 2133 MHz DDR4 Bus; 9.6 GT/s QPI Bus occupies socket for one CPU S26361-F3849-E123 Xeon E5-2660v3 10C/20T 2.60GHz 25MB 9.6GT/s 2133MHz 105W Xeon E5-2670v3 12C/24T 2.30GHz 30MB 9.6GT/s 2133MHz 120W S26361-F3849-E160 S26361-F3849-E170 Xeon E5-2680v3 12C/24T 2.50GHz 30MB 9.6GT/s 2133MHz 120W Xeon E5-2690v3 12C/24T 2.60GHz 30MB 9.6GT/s 2133MHz 135W Xeon E5-2600v3 (R) Frequency Optimized - 1x 64-bit Intel Xeon (10-20MB Smart Cache); Hyper-Threading (HT); 1866 & 2133 MHz DDR4 Bus; 8.0 & 9.6 GT/s QPI Bus occupies socket for one CPU Xeon E5-2637v3 4C/8T 3.50GHz 15MB 9.6GT/s 2133MHz 135W Xeon E5-2643v3 6C/12T 3.40GHz 20MB 9.6GT/s 2133MHz 135W Xeon E5-2667v3 8C/16T 3.20GHz 20MB 9.6GT/s 2133MHz 135W Xeon E5-2600v3 (R) High Core Count - 1x 64-bit Intel Xeon (35-40MB Smart Cache); Hyper-Threading (HT); 2133 MHz DDR4 Bus; 9.6 GT/s QPI Bus occupies socket for one CPU Xeon E5-2683v3 14C/28T 2.00GHz 35MB 9.6GT/s 2133MHz 120W Xeon E5-2695v3 14C/28T 2.30GHz 35MB 9.6GT/s 2133MHz 120W Xeon E5-2697v3 14C/28T 2.60GHz 35MB 9.6GT/s 2133MHz 145W Xeon E5-2698v3 16C/32T 2.30GHz 40MB 9.6GT/s 2133MHz 135W Xeon E5-2699v3 18C/36T 2.30GHz 45MB 9.6GT/s 2133MHz 145W Xeon E5-2600v3 (R) Low Power - 1x 64-bit Intel Xeon (20/30MB Smart Cache); Hyper-Threading (HT); 1866/2133 MHz DDR4 Bus; 8.0/9.6 GT/s QPI Bus occupies socket for one CPU Xeon E5-2630Lv3 8C/16T 1.80GHz 20MB 8.0GT/s 1866MHz 55W Xeon E5-2650Lv3 12C/24T 1.80GHz 30MB 9.6GT/s 2133MHz 65W S26361-F3849-E180 S26361-F3849-E190 S26361-F3849-E137 S26361-F3849-E143 S26361-F3849-E167 S26361-F3849-E183 S26361-F3849-E195 S26361-F3849-E197 S26361-F3849-E198 S26361-F3849-E199 S26361-F3849-E131 S26361-F3849-E151 S26361-F3849-E100 Cooling Kit 2nd CPU E1 E2 Fujitsu Technology Solutions x86 PRIMERGY Server 5 of 15 E1 E2 One of following CPU´s has to be selected as second CPU Optional second CPU has to be the same type like the first CPU Xeon E5-2600v3 (R) Basic - 1x 64-bit Intel Xeon (15MB Smart Cache) 1600 MHz DDR4 Bus; 6.4 GT/s QPI Bus occupies socket for one CPU Xeon E5-2603v3 6C/6T 1.60GHz 15MB 6.4GT/s 1600MHz 85W Xeon E5-2609v3 6C/6T 1.90GHz 15MB 6.4GT/s 1600MHz 85W System configurator and order-information guide PRIMERGY BX2560 M1 Status: 2016-04-01 S26361-F3849-E103 S26361-F3849-E109 Xeon E5-2600v3 (R) Standard - 1x 64-bit Intel Xeon (15/20MB Smart Cache); Hyper-Threading (HT); 1866 MHz DDR4 Bus; 8.0 GT/s QPI Bus occupies socket for one CPU Xeon E5-2620v3 6C/12T 2.40GHz 15MB 8.0GT/s 1866MHz 85W Xeon E5-2630v3 8C/16T 2.40GHz 20MB 8.0GT/s 1866MHz 85W Xeon E5-2640v3 8C/16T 2.60GHz 20MB 8.0GT/s 1866MHz 90W Xeon E5-2600v3 (R) Advanced - 1x 64-bit Intel Xeon (25/30MB Smart Cache); Hyper-Threading (HT); 2133 MHz DDR4 Bus; 9.6 GT/s QPI Bus occupies socket for one CPU S26361-F3849-E120 S26361-F3849-E130 S26361-F3849-E140 Xeon E5-2650v3 10C/20T 2.30GHz 25MB 9.6GT/s 2133MHz 105W S26361-F3849-E150 Xeon E5-2660v3 10C/20T 2.60GHz 25MB 9.6GT/s 2133MHz 105W Xeon E5-2670v3 12C/24T 2.30GHz 30MB 9.6GT/s 2133MHz 120W S26361-F3849-E160 S26361-F3849-E170 Xeon E5-2680v3 12C/24T 2.50GHz 30MB 9.6GT/s 2133MHz 120W Xeon E5-2690v3 12C/24T 2.60GHz 30MB 9.6GT/s 2133MHz 135W Xeon E5-2600v3 (R) Frequency Optimized - 1x 64-bit Intel Xeon (10-20MB Smart Cache); Hyper-Threading (HT); S26361-F3849-E180 S26361-F3849-E190 1866 & 2133 MHz DDR4 Bus; 8.0 & 9.6 GT/s QPI Bus occupies socket for one CPU Xeon E5-2623v3 4C/8T 3.00GHz 10MB 8.0GT/s 1866MHz 105W Xeon E5-2637v3 4C/8T 3.50GHz 15MB 9.6GT/s 2133MHz 135W Xeon E5-2643v3 6C/12T 3.40GHz 20MB 9.6GT/s 2133MHz 135W Xeon E5-2667v3 8C/16T 3.20GHz 20MB 9.6GT/s 2133MHz 135W Xeon E5-2600v3 (R) High Core Count - 1x 64-bit Intel Xeon (35-40MB Smart Cache); Hyper-Threading (HT); S26361-F3849-E123 S26361-F3849-E137 S26361-F3849-E143 S26361-F3849-E167 2133 MHz DDR4 Bus; 9.6 GT/s QPI Bus occupies socket for one CPU Xeon E5-2683v3 14C/28T 2.00GHz 35MB 9.6GT/s 2133MHz 120W Xeon E5-2695v3 14C/28T 2.30GHz 35MB 9.6GT/s 2133MHz 120W Xeon E5-2697v3 14C/28T 2.60GHz 35MB 9.6GT/s 2133MHz 145W Xeon E5-2698v3 16C/32T 2.30GHz 40MB 9.6GT/s 2133MHz 135W Xeon E5-2699v3 18C/36T 2.30GHz 45MB 9.6GT/s 2133MHz 145W Xeon E5-2600v3 (R) Low Power - 1x 64-bit Intel Xeon (20/30MB Smart Cache); Hyper-Threading (HT); 1866/2133 MHz DDR4 Bus; 8.0/9.6 GT/s QPI Bus occupies socket for one CPU Xeon E5-2630Lv3 8C/16T 1.80GHz 20MB 8.0GT/s 1866MHz 55W Xeon E5-2650Lv3 12C/24T 1.80GHz 30MB 9.6GT/s 2133MHz 65W Special Release only S26361-F3849-E183 S26361-F3849-E195 S26361-F3849-E197 S26361-F3849-E198 S26361-F3849-E199 S26361-F3849-E131 S26361-F3849-E151 Separate orderable CPU upgrade kits S26361-F3849-L603 Xeon E5-2603v3 6C/6T 1.60GHz 15MB 6.4GT/s 1600MHz 85W S26361-F3849-L609 Xeon E5-2609v3 6C/6T 1.90GHz 15MB 6.4GT/s 1600MHz 85W S26361-F3849-L620 Xeon E5-2620v3 6C/12T 2.40GHz 15MB 8.0GT/s 1866MHz 85W S26361-F3849-L630 Xeon E5-2630v3 8C/16T 2.40GHz 20MB 8.0GT/s 1866MHz 85W S26361-F3849-L640 Xeon E5-2640v3 8C/16T 2.60GHz 20MB 8.0GT/s 1866MHz 90W S26361-F3849-L643 Xeon E5-2643v3 6C/12T 3.40GHz 20MB 9.6GT/s 2133MHz 135W S26361-F3849-L650 Xeon E5-2650v3 10C/20T 2.30GHz 25MB 9.6GT/s 2133MHz 105W S26361-F3849-L623 Xeon E5-2623v3 4C/8T 3.00GHz 10MB 8.0GT/s 1866MHz 105W E3 Fujitsu Technology Solutions x86 PRIMERGY Server 6 of 15 System configurator and order-information guide PRIMERGY BX2560 M1 Status: 2016-04-01 E3 Section XII Storage / RAID Functionality on Server Blade One UFM can be installed independent from the disk drives Remark: UFM is part of the VMWare Embedded solution (26361-F2341-E433) Configuration Hint - Second CPU needed for PCIe x4 Gen3 SSD/HDD Option The PCIe HDD/SSD Option is only supported if the second CPU is installed Please refer the following configuration matrix for your desired confuration. S26361-F3823-E410 S26361-F3823-E400 S26361-F4008-E100 S26361-F4008-E101 PRAID EM400i PRAID CM400i PCH connection Kit PCIe x4 Gen3 PY SAS 12G RAID HDD Module PY SAS 12G RAID HDD Module supports up to 2 HDD/SSD w/ 1 GB Cache w/o Cache connected to onboard PCH MegaRAID MegaRAID RAID level 0/1/1E/10/5/50/6/60 RAID level 0/1/10 Hint: 2nd CPU is mandatory SAS 12 Gb/sec SAS 12 Gb/sec for this Option incl. PRAID EM400i Riser incl. PRAID EM400i Riser for this Option pluggable on the main board pluggable on the main board PCIe Gen3 interface PCIe Gen3 interface 4x SAS links to midplane 2x SAS links to internal HDD's 2x SAS links to internal HDD's max. 1x per Server Blade max. 1x per Server Blade SATA interface PCIe x4 Gen3 interface 2x PCIe x4 Gen3 links 2x SATA links to int. HDD's to internal HDD's max. 1x per Server Blade max. 1x per Server Blade S26361-F3823-E10 PRAID EM400i FBU PY FBU03 Module Flash Backup Unit incl. FBU holder SATA HDD / SSD PCIe-SSD / HDD S26361-F3823-E30 PRAID EM400i Mezz PY SAS Expander Mezzanine Card connection to SAS CB incl. SAS cable S26361-F3823-E20 S26361-F3823-E20 PRAID EM400i BP PRAID EM400i BP PY SAS 12G HDD Backplane PY SAS 12G HDD Backplane 2 internal SAS links 2 internal SAS links to PY SAS 12G RAID HDD Modul to PY SAS 12G RAID HDD Modul G Fujitsu Technology Solutions x86 PRIMERGY Server 7 of 15 Solid State Disk, Mainstream Endurance* *) SSD Mainstream Endurance SSD SAS 12Gb/s 2.5" with hot plug/hot replace tray 1 - 2x 200GB, Enterprise Performance S26361-F5298-E200 400GB, Enterprise Performance S26361-F5298-E400 800GB, Enterprise Performance S26361-F5298-E800 1.6TB, Enterprise Performance S26361-F5298-E160 10DWPD over 5y max. 2x per system Solid State Disk, Mainstream Endurance* *) SSD Mainstream Endurance SSD SATA 6Gb/s 2.5" with hot plug/hot replace tray 1 - 2x 100GB, Mainstream Performance S26361-F3821-E100 200GB, Mainstream Performance S26361-F3821-E200 400GB, Mainstream Performance S26361-F3821-E400 800GB, Mainstream Performance S26361-F3821-E800 10DWPD over 5y max. 2x per system Solid State Disk, Read-Intensive Endurance** SSD SATA 6Gb/s 2.5" with hot plug/hot replace tray 1 - 2x *) SSD Read-Intesive Endurance 120GB, Read-Intensive S26361-F5525-E120 240GB, Read-Intensive S26361-F5525-E240 480GB, Read-Intensive S26361-F5525-E480 800GB, Read-Intensive S26361-F5525-E800 0.3DWPD over 5y max. 2x per system PCIe3.0 Solid State Disk, Mainstream Endurance* *) SSD Mainstream Endurance SSD PCIe3.0 2.5" with hot plug/hot replace tray 1 - 2x 800GB, MLC, NVMe, high Enterprise Performance S26361-F5534-E800 1.6TB, MLC, NVMe, high Enterprise Performance S26361-F5534-E161 2TB, MLC, NVMe, high Enterprise Performance S26361-F5534-E201 10DWPD over 5y max. 2x per system SSD SATA DOM 32GB, Endurance=86 TBW (Seq. write) 1x S26361-F5523-E32 64GB, Endurance=172 TBW (Seq. write) S26361-F5523-E64 128GB, Endurance=345 TBW (Seq. write) S26361-F5523-E128 SATADOM is designed for use as a boot drive with the Endurance Spec. above. Vmware not supported. max. 1x per system HDD SATA 6Gb/s 2.5" hot plug/hot replace 1-2x 250GB 7.200rpm,<9,5ms, 64MB Cache S26361-F3816-E250 500GB 7.200rpm,<9,5ms, 64MB Cache S26361-F3816-E500 1TB 7.200rpm,<9,5ms, 64MB Cache S26361-F3816-E100 max. 1x per system HDD SAS 6Gb/s 2.5" hot plug/hot replace 1 - 2x 146GB 15krpm,<4,5ms, 32MB Cache, 512n S26361-F3818-E514 300GB 10000rpm,<4,5ms, 32MB Cache, 512n S26361-F3818-E130 450GB 10000rpm,<4,5ms, 32MB Cache, 512n S26361-F3818-E145 600GB 10000rpm,<4,5ms, 32MB Cache, 512n S26361-F3818-E160 900GB 10000rpm,<4,5ms, 32MB Cache, 512n S26361-F3818-E190 1.2TB 10000rpm,<4,5ms, 64MB Cache, 512n S26361-F3818-E112 500GB 7.2krpm,<9,5ms, 64MB Cache, 512n S26361-F3817-E500 1TB 7.2krpm,<9,5ms, 64MB Cache, 512n S26361-F3817-E100 HDD SAS 12Gb/s 2.5" hot plug/hot replace 450GB 10000rpm, 128MB Cache, 512e S26361-F5543-E145 600GB 10000rpm, 128MB Cache, 512e S26361-F5543-E160 900GB 10000rpm, 128MB Cache, 512e S26361-F5543-E190 1.2TB 10000rpm, 128MB Cache, 512e S26361-F5543-E112 1.8TB 10000rpm, 128MB Cache, 512e S26361-F5543-E118 300GB 10000rpm, 128MB Cache, 512n S26361-F5550-E130 600GB 10000rpm, 128MB Cache, 512n S26361-F5550-E160 900GB 10000rpm, 128MB Cache, 512n S26361-F5550-E190 1.2TB 10000rpm, 128MB Cache, 512n S26361-F5550-E112 300GB 15krpm,<=3,1ms, 128MB Cache, 512n S26361-F5531-E530 450GB 15krpm,<=3,1ms, 128MB Cache, 512n S26361-F5531-E545 600GB 15krpm,<=3,1ms, 128MB Cache, 512n S26361-F5531-E560 max. 2x per system F Fujitsu Technology Solutions x86 PRIMERGY Server 8 of 15 System configurator and order-information guide PRIMERGY BX2560 M1 Status: 2016-04-01 F III Section Memory - There are 8 memory slots per CPU for max. 512GB LRDIMM (8x 64GB 4R) 256GB RDIMM (8x 32GB 2R) => max. 1024GB for two CPU`s ( 512GB per CPU ), using LRDIMM - The memory area is divided into 4 channels per CPU with 2 slots per channel - Slot 1 of each channel belongs to memory bank 1, slot 2 belongs to memory bank 2 Registered and Load Reduced DIMMs can be selected No mix of registered and load reduced modules is allowed. Memory will be operated at 1.2V. Depending on the CPU following memory speeds will be reached: In a single DIMM per channel configuration 2133MHz will be supported This is also valid for dual DIMM configurations (2133MHz) SDDC (Chipkill) is supported for registered and load redueced x4 organized memory modules 1.) In the "Independent Channel Mode" is following configuration possible Channels can be populated in any order in Independent Channel Mode. All four channels may be populated in any order and have no matching requirements. All channels must run at the same interface frequency but individual channels may run at different DIMM timings (RAS latency, CAS latency, and so forth) No mix of registered and load reduced modules is allowed. 2.) "Rank Sparing Mode" configuration Within a memory channel, one rank is a spare of the other ranks. The Spare Rank is held in reserve and is not available as system memory For the effective memory capacity, please refer to the spreadsheet below. The BIOS is set to the rank sparing setting. Minimum configuration is: 2x 1R, 2x 2R or 1x4R DDR4 module per channel 3.) "Performance Mode" configuration In this configuration, the memory module population ex factory is spread across all channels. The BIOS is set to the max. performance for memory. Minimum configuration is four identical modules per CPU 4.) In the "Mirrored Channel Mode" is following configuration possible Each memory bank can optionally be equipped with four registered or load reduced DDR4 modules In each memory bank channel A and B / C and D of CPU 1 or channel E and F / G and H of CPU 2 have to be equipped with identical modules for mirrored channel mode. In channel B / D is always the mirrored memory of channel A / C of CPU 1 In channel F / H is always the mirrored memory of channel E / G of CPU 2 Minimum configuration is: 4x identical modules F1 Fujitsu Technology Solutions x86 PRIMERGY Server 9 of 15 System configurator and order-information guide PRIMERGY BX2560 M1 Status: 2016-04-01 F1 S26361-F3694-E10 Independent Mode Independent Channel Mode allows all channels to be populated in any order. No specific Memory RAS features are defined Requires min 1 memory Module per CPU S26361-F3694-E1 Rank Sparing Mode Installation BIOS Setup factory preinstalled to this mode. One Rank is spare of other ranks on the same channel. Spare Rank is not shown in System Memory. 1x per CPU For effective capacity within a channel, please have a look below. Requires min 2x 1R/2R or 1x 4R modules per CPU S26361-F3694-E2 Performance Mode Installation BIOS Setup factory preinstalled for maximum Performance, Four identical memory modules will be equipped in one memory bank to achieve highest memory performance. All four modules are active and full capacity can be used. Multiple of 4 identical modules to be configured per CPU S26361-F3694-E3 Mirrored Channel Mode Installation BIOS Setup factory preinstalled to this mode. Four identical memory modules are always equipped in one memory bank to use the Mirrored channel Mode. Only two modules contain active data, the remain two modules contain mirrored data Multiple of 4 identical modules to be configured per CPU Effective Memory capacity / Rank Sparing Mode, 1 Channel populated RDIMM LRDIMM 8GB 1R 16GB 2R 32GB 2R 32GB 4R 64GB 4R 1DPC 24GB 48GB 2DPC 8GB 24GB 48GB 56GB 112GB Minimum one memory module or order code per CPU = first memory Note 1) Max. DDR4 memory speed depends on the memory configuration (No of mem modules per channel) as well as on the CPU type. The memory channel with the lowest speed defines the speed of all CPU channels in the system, also for the channels of the second CPU if configured. For real memory speed (depending on memory type / population), please check the spreadsheet "Memory speed" below Note 2) Mix of memory modules is only possible within the same group Registered Memory (RDIMM) with SDDC (chipkill) support - one DDR4 registered ECC memory Module, 1.2V Choose up to 8 order codes per CPU 8GB (1x8GB) 1Rx4 DDR4-2133 R ECC S26361-F3843-E614 16GB (1x16GB) 2Rx4 DDR4-2133 R ECC 32GB (1x32GB) 2Rx4 DDR4-2133 R ECC S26361-F3843-E616 S26361-F3843-E617 as soon as available Registered Memory (RDIMM) no SDDC (chipkill) support 8x per - one DDR4 registered ECC memory Module, 1.2V CPU, max. 2 modules Choose up to 8 order codes per CPU 8GB (1x8GB) 2Rx8 DDR4-2133 R ECC per channel Load Reduced Memory (LRDIMM) with SDDC (chipkill) support S26361-F3843-E615 - one DDR4 load reduced ECC memory Module, 1.2V Choose up to 8 order codes per CPU 32GB (1x32GB) 4Rx4 DDR4-2133 LR ECC 64GB (1x64GB) 4Rx4 DDR4-2133 LR ECC S26361-F3844-E617 S26361-F3844-E618 as soon as available G Fujitsu Technology Solutions x86 PRIMERGY Server 10 of 15 System configurator and order-information guide PRIMERGY BX2560 M1 Status: 2016-04-01 Memory Configuration PRIMERGY BX2560 M1 Each CPU offers 8 Slots for DDR4 Memory Modules organised in 2 Banks and 4 Channels. If you need more than 8 Slots you have to configure the 2nd CPU. Depending on the amount of memory configured you can decide between 4 basic modes of operation (see explanation below). There are 2 different kinds of DDR4 Memory Modules available: RDIMM and LRDIMM Mix of RDIMM and LRDIMM is not allowed. Mode Configuration RDIMM RDIMM Application LRDIMM x4 x8 SDDC (chipkill) support any no yes detect multi-bit errors Independant Channel Mode 1, 2 or 3 Modules per Bank yes yes offers max. flexibility, upgradeability, capacity Mirrored Channel Mode *) 4 identical Modules / Bank no yes offers maximum security Performance Mode 4 identical Modules / Bank yes yes offers maximum performance and capacity Rank Sparing Mode *) min. 2 Ranks / Channel no yes balances security and capacity *) For the delivery ex works the system will be prepared with dedicated BIOS setting. Capacity Min. Memory per CPU Max. Memory per CPU Max. Memory per System Configuration 1 Module / CPU 8/12 Modules / CPU 16/24 Modules / System RDIMM LRDIMM 1x8GB 1x32GB 8x32GB 8x64GB 512GB 1024GB Notes with one CPU with one CPU if second CPU is configured Memory-Speed: Max. DDR4 memory speed depends on the memory configuration on one memory channel and the speed of the CPU The memory channel with the lowest speed defines the speed of all CPU channels in the system Mem. Speed provided by CPU Real maximum memory-bus speed depending on CPU type, memory configuration (DPC) and voltage setting (BIOS) RDIMM LRDIMM 2133MHz 2133MHz Voltage setting (BIOS) 1.2V 1.2V 1 2 1 2 DPC DPC DPC DPC CPU with 2133MHz DDR4 Bus 2133 2133 2133 2133 CPU with 1866MHz DDR4 Bus 1866 1866 1866 1866 CPU with 1600MHz DDR4 Bus 1600 1600 1600 1600 1R - Single Rank 2R - Dual Rank 4R - Quad Rank 8R - Eight Rank 1DPC = 1 DIMM per Channel 2DPC = 2 DIMM per Channel Configuration hints: - The memory sockets on the systemboard offer a color coding: Bank I black sockets Bank II blue sockets - A so called Bank consits of 1 memory module on every Channel available on one CPU (examples see below) Bank I on CPU 1/2 up to 4 memory modules connected to Channel A - H on the 1st/2nd CPU Bank II on CPU 1/2 up to 4 memory modules connected to Channel A - E on the 1st/2nd CPU - See below and next page for a detailed descriptions of the memory configuration supported. Fujitsu Technology Solutions x86 PRIMERGY Server 11 of 15 System configurator and order-information guide PRIMERGY BX2560 M1 Status: 2016-04-01 Channel C Channel D Channel E Channel F Channel G Channel H Bank I Data (black sockets) Bank II Data (blue sockets) Channel B Channel A 1. Independent Channel Mode Data Data Data Data Data Data Data optional, same type in Bank per CPU Data Data Data Data Data Data Data optional, any type 1st XEON CPU required required if 2nd CPU is configured -------- 2nd XEON CPU not used Independent Channel Mode allows all channels to be populated in any order Can run with differently rated DIMMs and use the settings of the slowest DIMM installed in the system Channel C Channel D Channel E Channel F Channel G Channel H Bank I Data (black sockets) Bank II Data (blue sockets) Channel B Channel A 2. Mirrored Channel Mode Mirror Data Mirror Data Mirror Data Mirror Mirror Data Mirror Data Mirror Data Mirror 1st XEON CPU required required if 2nd CPU is configured optional, same type in Bank per CPU 2nd XEON CPU Mirrored Channel Mode requires identical modules on channel A,B, C, D (1st CPU) or channel E, F, G and H (2nd CPU) 50% of the capacity is used for the mirror => the available memory for applications is only half of the installed memory If this mode is used, a multiple of 4 identical modules has to be ordered. Channel C Channel D Channel E Channel F Channel G Channel H Bank I Data (black sockets) Bank II Data (blue sockets) Channel B Channel A 3. Performance Channel Mode Data Data Data Data Data Data Data optional, same type in Bank per CPU Data Data Data Data Data Data Data optional, any type 1st XEON CPU required required if 2nd CPU is configured 2nd XEON CPU Performance Channel Mode requires identical modules on all channels of each Bank per CPU. If this mode is used, a multiple of 4 identical modules has to be ordered. Fujitsu Technology Solutions x86 PRIMERGY Server 12 of 15 System configurator and order-information guide PRIMERGY BX2560 M1 Status: 2016-04-01 4. Rank Sparing Mode Channel C Channel D Channel E Channel F Channel G Channel H Bank I Spare (black sockets) Bank II Data (blue sockets) Channel B Channel A 1-Rank Memory modules (RDIMM) Spare Spare Spare Spare Spare Spare Spare optional, same type in Channel per CPU Data Data Data Data Data Data Data optional, any type 1st XEON CPU required required if 2nd CPU is configured 2nd XEON CPU Channel B Channel C Channel D Channel E Channel F Channel G Channel H Channel A 2-Rank Memory modules (RDIMM) Bank I (black) R1 Spare R2 Data Spare Data Spare Data Spare Data Spare Data Spare Data Spare Data Spare Data Bank II (blue) R1 Data R2 Data Data Data Data Data Data Data Data Data Spare Data Spare Data Spare Data required required if 2nd CPU is configured 1st XEON CPU optional, same type in Channel per CPU optional, any type 2nd XEON CPU Channel B Channel C Channel D Channel E Channel F Channel G Channel H Bank I (black) Channel A 4-Rank Memory modules (LRDIMM) R1 R2 R3 R4 Spare Data Data Data Spare Data Data Data Spare Data Data Data Spare Data Data Data Spare Data Data Data Spare Data Data Data Spare Data Data Data Spare Data Data Data R1 R2 R3 R4 Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Spare Data Data Data Spare Data Data Data Spare Data Data Data required required if 2nd CPU is configured optional, same type in Channel per CPU Bank II (blue) 1st XEON CPU optional, any type 2nd XEON CPU Rank Sparing Mode requires identical modules (same capacity and technology) within the same channel. The available memory for applications will vary depending on configuration. Please refer to the spreadsheet above "Effective Memory capacity with active Rank Sparing Mode". Population rule for Rank sparing mode is to achieve max. available memory, e.g. 8 DIMMs will be spread across two channels, each with 4DPC Fujitsu Technology Solutions x86 PRIMERGY Server 13 of 15 System configurator and order-information guide PRIMERGY BX2560 M1 Status: 2016-04-01 G XIV Section iRMC S4, Graphics Graphic Controller is part of the onboard Management Controller iRMC S4. Other graphics are not possible. The iRMC S4 advanced pack is included in the system delivery. A corresponding license order is not necessary. XV Section Mezzanine cards for Dual Socket Server Blade The Dual Server Blade supports the following optional mezzanine cards. A Fibre Channel Switch / Pass-Thru blade, an Ethernet LAN Switch / Pass-Thru blade, respectively an InfiniBand switch is required in the system unit for this functionality. S26361-F4481-E1 S26361-F4480-E1 PY SAS RAID Mezz Card 6Gb PY SAS HBA Mezz Card 6Gb SAS/HBA Mezz. Card MegaRAID HBA Only to be used in slot 2 SAS 2.0 SAS 2.0 pluggable on the main board pluggable on the main board PCIe Gen2 interface PCIe Gen2 interface 4x SAS links to midplane 4x SAS links to midplane Path redundancy is not max. 1x per Server Blade 1x supported! max. 1x per Server Blade Requires an Ethernet LAN Requires a Fibre Channel Requires an InfiniBand Switch, IBP or Pass-Thru Switch for each channel. Switch for each Mezz Card. Blade for each channel. 0 - 2x S26361-F3331-E1 S26361-F3874-E1 S26361-F4534-E1 PY Eth Mezz Card 1Gb 4 Port PY FC Mezz Card 8Gb 2 Port PY IB CX3 Mezz Card 56Gb 2 Port 2x Intel Zoar controller Emulex LPe12002 compatible Interface to midplane: 4x 10/100/1000 Mbit/s. pluggable on the main board, 2x 10Gb/s(SDR), 2x 20Gb/s(DDR) pluggable on the main board, MC-FC82E 2x 40Gb/s(QDR) 2x 56Gb/s(FDR) four channel 1Gbit/s Dual channel 8Gbit/s Dual channel 56Gbit/s each PCIe x4 Interface max. 2x per Server Blade PCIe x8 interface max. 2x per Server Blade PCIe x8 interface max. 2x per Server Blade S26361-F3997-E1 S26361-F4994-E402 PY Eth Mezz Card 10Gb 2 Port PY FC Mezz Card 16Gb 2 Port Intel 82599EB LAN Controller Emulex LPe12002 compatible 2x 10Gbit/s. pluggable on the main board, pluggable on the main board, MC-FC162E Dual channel 10Gbit/s Dual channel 16Gbit/s PCIe x8 Interface PCIe x8 interface max. 2x per Server Blade iSCSI Boot (planned) max. 2x per Server Blade as soon as available S26361-F3592-E532 PY CNA Mezz Card 10Gb 2 Port Emulex OCe11102 compatible pluggable on the main board MC-CNA112E Dual channel 10Gbit/s PCIe x8 Interface max. 2x per Server Blade R S T U V R: see separate BX900 System Unit configurator, sheet "1 GB Ethernet" S: see separate BX900 System Unit configurator, sheet "10 GB Ethernet" T: see separate BX900 System Unit configurator, sheet "Fibre Channel" U: see separate BX900 System Unit configurator, sheet "InfiniBand" V: see separate BX900 System Unit configurator, sheet "CB SAS" https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx Fujitsu Technology Solutions x86 PRIMERGY Server 14 of 15 System configurator and order-information guide PRIMERGY BX2560 M1 Status: 2016-04-01 Change Report Date 2016-02-18 2016-01-08 2015-09-01 2015-07-21 2015-06-15 2015-05-29 2015-04-02 2015-01-21 2015-01-14 2015-01-07 2014-09-30 2014-08-27 2014-08-27 2014-08-25 2014-08-25 2014-08-25 2014-08-25 2014-08-15 2014-08-06 2014-07-30 2014-07-21 2014-07-17 2014-07-07 2014-06-04 2014-05-28 2014-05-14 2014-05-06 2014-05-05 2014-04-25 2014-04-22 2014-03020 2014-03-04 2014-02-21 2013-12-05 2013-03-13 Order number S26361-F3849-L643 S26361-F5550-* S26361-F5543-E* S26361-F3823-E4x0 S26361-F4481-E1 S26361-F3823-E400 S26341-F103-L119 S26361-F3818-E5* S26361-F3992-E2 S26361-F5523-E32 S26361-F5531-E5* S26361-F3818-E5* S26361-F5525-E080 CPU restrictions S26361-F1790-E310 S26361-F3823-E20 S26361-F3843-E617 S26361-F3849-L603 S26361-F3823-E40 S26361-F2341-E432 S26361-F3849-E143 S26361-F4481-E1 S26361-F3849-E100 S26361-F4994-E402 S26361-F3552-E6 Changes Update of hint for CPU thermal restriction Memory description updated (page Memory; line 14 - 20) Special Release CPU added Added 2.5" HDD SAS 12G 10Krpm 512n CPU configuration possibilites updated Added 2.5" HDD SAS 12G 10Krpm 512e up to 1.8TB. Bugfix in RAID level description Bug fix; internal Links deleted Puma 4 Lite connection corrected S36341-F103-L119 removed 2DPC RDIMM configuration @ 2.133MHz available in 11/2014 Added 2.5" HDD SAS 6G 15Krpm 300GB, 450GB, 600GB IB QDR Mezz removed due to EOL of supplier Added 32GB SATADOM Added 2.5" HDD SAS 12G 15Krpm 300GB, 450GB, 600GB Removed 2.5" HDD SAS 6G 15Krpm 300GB, 450GB, 600GB Removed 2.5" 80GB Read-Intensive SSD added restictions for CPU heat sink. added embeded Lifcycle Manager Module correction in relation to PRAID Modules 32GB RDIMM available in Q1/2015 - comment added Added lose CPU components Riser card moved to Puma delivery unit ( S26361-F3823-E400/E410) Referenz to 4GB UFM Module added corrected Cache on order number S26361-F3849-E143 Added hint for non supported redundant path Processor segment updated Update from CPU Roadmap Update from CPU Roadmap HDD and SSD order numbers updated. Added 16 Gb FC Mezz Card Updatet Processor Section and Memory SD-Kart added Changed TPM Module First release Fujitsu Technology Solutions x86 PRIMERGY Server 15 of 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 15 Language : de-DE Tagged PDF : Yes Title : Configurator PRIMERGY BX2560 M1 Author : Ewald Harms Subject : Blade Server Keywords : Dec, 2009 Create Date : 2017:07:11 12:45:33+02:00 Modify Date : 2017:07:11 12:45:33+02:00 Producer : Microsoft® Excel® 2010 Creator : Microsoft® Excel® 2010EXIF Metadata provided by EXIF.tools