Epac_receiver_and_antenna_datasheet Epac Receiver And Antenna Datasheet
User Manual: epac_receiver_and_antenna_datasheet
Open the PDF directly: View PDF 
.
Page Count: 1
ePAC Receiver and Antenna*
Part Numbers:
40441 - ePAC Receiver
40254 - Antenna 868 SMA type-1, long
The ePAC Receiver is used to wirelessly open doors/barriers or
to trigger an external relay in combination with a PAC access
control solution. The ePAC Receiver communicates an opening
signal via encrypted 868 MHz from the ePAC Active Transponder
(P/N 40440) using the 868 SMA type-1, long antenna*.
The ePAC Receiver and the ePAC Active Transponder are using
AES128 encryption on the 868 MHz frequency and through a
challenge response procedure, a session is created. The key checks
if the ePAC Active Transponder and Receiver are PAC devices,
which ensures very high communication security between them.
This reduces the possibility of cloning as this is a risk with other
radio based solutions.
■ Dimensions: Receiver: 65 x 50 x 37 mm
Antenna: 220 mm x 14.5mm
■ Voltage: 8-20V DC or 8-16V AC
■ Storage Temperature: -40° C to +65° C
■ Mounting Location: Indoor
■ Storage Temperature: -40° C to +65° C
Customer Services:
customerservices@pacgdx.com
+44 (0) 161 406 3400
PAC Access Control, 1 Park Gate Close, Bredbury, Stockport, Cheshire, SK6 2SZ
www.pacgdx.com
Contact our dedicated customer services
team on:
+44 (0) 161 406 3400
To nd out how you can start beneting
from a tailored PAC security system
that accommodates your business’
requirements.
* Antenna must be used with the ePAC Receiver and is sold separately
ePACRec.ant/8.17
*Antenna sold separately
