Section 1 Intro

User Manual: Section 1 OP-620 Manual

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

1
EU Information
This product is manufactured in compliance with European Union (EU) Directives and carries the CE
mark. The following information is provided to comply with EU documentation requirements.
NOTE: Products with CE marks perform their required functions safely and adhere
to relevant standards as specified by EC directives provided they are used
according to their intended purpose and that the instructions in this manual are
adhered to. The protection provided by the equipment may be impaired if this
equipment is used in a manner not specified in this manual. Only replacement parts
supplied by PLCDirect or its agents should be used. A listing of international affiliates
is available at our Web site
http://www.plcdirect.com
Technical Support

If you need technical assistance, please call the technical support group at
PLCDirect (3505 Hutchinson Rd., Cumming, GA 30040, U.S.A.) at 800--633--0405.
They are available Monday through Friday from 9:00 A.M. to 6:00 P.M. Eastern
Standard Time. Their Web Site address is
http://www.plcdirect.com

SELV Circuits

All electrical circuits connected to the communications port receptacle are rated as
Safety Extra Low Voltage (SELV).

Environmental
Specifications

Operating Temperature . . . . . . . . . . . . . . . . . . . . . 0° to 50° C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . --20° to 70° C
Operating Humidity . . . . . . . . . . . . . . . . . . . . . . . . 95% (non-condensing)
Air Composition . . . . . . . . . . . . . . . . . . . . . . . . . . . No corrosive gases permitted

Preventative
Maintenance and
Cleaning

No preventative maintenance is required. To clean the exterior of the panel
disconnect the input power and carefully wipe the panel with a cloth moistened with
plain water.

External Fuse
Protection
for Input Power

There are no internal fuses for the input power circuits, so external circuit protection
is needed to ensure the safety of service personnel and the safe operation of the
equipment itself. To comply with EU specifications, the input power must be fused.
Use a fuse rated at twice the input current rating of the panel. For example, if the
panel has an input current rating of 0.5 amperes, use a fuse rated for 1 ampere.

Installing and Using the Example Programs

The Purpose of
this Manual

This User Manual provides user information on panel installation, panel
configuration, and programming the OP-620. The purpose of this manual is to teach
programming techniques which may be applied while implementing the OptiMater
panels. After reading the manual completely, load and run the example programs
which are on the supplied diskette using the directions in Appendix A.

Contents of the
Manual

Inside this manual you will learn about
planning, implementing, and utilizing the
OptiMate OP-620 panel. Also included
are application examples to improve the
learning process and working knowledge
of the OptiMate units.

How to
Use the

OP-620

The OPĆ1500 and OPĆ1510
Operator panels may be
reconfigured to exchange data
with
your
programmable
controller.

Supplemental
Manuals

Reference the appropriate PLC/CPU
User Manuals for the commands and
address references required for your
system. If you are using a DirectLOGIC
PLC product, you will want to keep the
DirectSOFT User Manual handy while
programming your system. For other
PLC brands you must reference their
User manuals to properly program the
ladder logic required to operate the
OP-panels.
For Multi-Panel applications utilizing the
OP-9001
Communications
Master
please refer to the OPĆ9001 User Manual
(Part Number OP–9001–M).

Technical
Assistance

After completely reading this manual, including Appendix B, Troubleshooting the
OP-620, if you are not successful with implementing the OP-620, you may call
PLCDirect at (800) 633-0405, Monday through Friday from 9:00 A.M. to 6:00 P.M.
Eastern Standard Time. Our technical support group will work with you in answering
your application questions. If you have a comment or question about our products,
services, or manuals which we provide, please fill out and return the suggestions
card included with this manual.

Appendix B
ASCII to HEX Cross Ref.

Introduction



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 1998:06:10 10:58:00
Producer                        : Acrobat Distiller 3.0 for Windows
Modify Date                     : 1999:04:30 16:46:52-04:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools