J659_p4t J659 P4t
User Manual: j659_p4t
Open the PDF directly: View PDF 
.
Page Count: 120
| Download | |
| Open PDF In Browser | View PDF |
®
FCC & DOC COMPLIANCE
This device complies with FCC Rules Part 15. Operation is subject to the following
two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with manufacturer's instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING! Any changes or modifications to this product not expressly approved by the manufacturer could void any assurances of safety or performance
and could result in violation of Part 15 of the FCC Rules.
Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the
Federal Register, National Archives and Records Administration, U.S. Government Printing Office.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
1
2
3
45 6 7
24
23
22
21
20
19
18
17
16 15 14 13 12 11 10 9 8
24.4cm (9.60in)
PS/2KBMS
T: Mouse
B: Keyboard
ATX Power Connector
RIMMB2 (16/18 bit, 184-pin module)
RIMMB1 (16/18 bit, 184-pin module)
COM1
PARALLEL PORT
RIMMA2 (16/18 bit, 184-pin module)
RIMMA1 (16/18 bit, 184-pin module)
MAIN_FAN
TR2
AUX Power
Connector
COM2
CPU_FAN
USBPWR
Intel 850
FLOPPY
Socket 423
Top:
T: Port1 RJ-45
B: Port2
®
ATX12V
1
Accelerated Graphics Port (AGP Pro)
Intel I/O
Controller
Hub
(ICH2) CLRTC
PCI1
CR2032 3V
Lithium Cell
CMOS Power
PCI2
4Mbit
Firmware
Hub
PCI4
IR
SCSILED
PCI_FAN
WOR
PCI5
CHASSIS
ASUS
ASIC
with
Hardware
Monitor
DIP
Switches
LED
PCI3
P4T
PRIMARY IDE
1
SECONDARY IDE
USB
SMB
Multi
I/O
JEN
USB2
WOL
HDDLED
PANEL
30.5cm (12.0in)
1
Memory
Controller
Hub (MCH)
®
ON
Standby
Power
P4T
P4T Onboard LED
OFF
Powered
Off
ON
OFF
ON
1 2 3 4 5 6 7 8 9 10
SW1
®
P4T
1. Frequency Multiple
2. Frequency Multiple
3. Frequency Multiple
4. Frequency Multiple
5. Reserved
6. Frequency Selection
7. Frequency Selection
8. Frequency Selection
9. Frequency Selection
10. Frequency Selection
P4T DIP Switches
1 2 3 4 5 6 7 8 9 10
OFF
SW1
ON
®
P4T
P4T JumperFree™ Mode Setting
Jumper
JumperFree
2 3
1 2
JEN
USBPWR
®
1 2
Enable
P4T
P4T USB Device Wake Up
2 3
Disable
(Default)
CPU/DRAM → 130.0MHz 133.0MHz
PCI BUS → 43.3.0MHz 44.3MHz
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
118.0MHz
39.3MHz
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
ON
ON
CPU/DRAM → 120.0MHz 122.0MHz 125.0MHz
PCI BUS → 40.0MHz 40.7MHz 41.7MHz
108.0MHz
36.0MHz
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
ON
ON
P4T CPU
External Frequency Selection
ON
P4T
1 2 3 4 5 6 7 8 9 10
CPU/DRAM → 110.0MHz 112.0MHz 115.0MHz
PCI BUS → 36.7MHz 37.3MHz 38.3MHz
1 2 3 4 5 6 7 8 9 10
®
1 2 3 4 5 6 7 8 9 10
ON
CPU/DRAM → 100.0MHz 103.0MHz 105.0MHz
PCI BUS → 33.3MHz 34.3MHz 35.0MHz
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
ON
SW1
128.0MHz
42.7MHz
P4T
®
P4T CPU External
Clock (BUS) Frequency
Selection
SW1
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
ON
12.0x
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
11.0x
16.0x
ON
10.0x
15.0x
ON
1 2 3 4 5 6 7 8 9 10
9.0x
14.0x
ON
ON
8.0x
13.0x
ON
ON
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
a.
C-RIMM
128MB RDRAM
RIMMB2
RIMMB1
C-RIMM
128MB RDRAM
RIMMA2
RIMMA1
128MB RDRAM
C-RIMM
RIMMB2
RIMMB1
128MB RDRAM
C-RIMM
RIMMA2
RIMMA1
128MB RDRAM
128MB RDRAM
RIMMB2
RIMMB1
128MB RDRAM
128MB RDRAM
RIMMA2
RIMMA1
b.
c.
Channel B
RIMMB2
RIMMB1
Channel A
RIMMA2
RIMMA1
RIMM Sockets
®
RIMM with Heat Spreader
C-RIMM
P4T
P4T 184-Pin RIMM Sockets
MOUNTING NOTCH
RDRAM (with heat spreader)
NOTCH KEYS
CONNECTORS
(TOP VIEW)
EJECTOR
RIBS (inside socket)
®
Pin 1
P4T
P4T Socket 423
Pentium 4
Processor
Gold Arrow
Pin 1
Rubber Pad
Metal Baseboard
2 Metal heatsink retaining clips
4 Copper captive nuts
4 Washers
4 Pan Head screws
2 Heatsink support bases
Rubber Pad Metal Baseboard
Copper captive nut
Mothe
rboard
Washer
®
rd
Mo
oa
b
r
e
th
Washer
1
2
3
1
2
AGP Card without Retention Notch
®
TOP VIEW
P4T
20-pin bay
Rib (inside slot)
P4T Accelerated Graphics Port (AGP PRO)
28-pin bay
Rib
PS/2 Mouse (6-pin Female)
PS/2 Keyboard (6-pin Female)
Parallel Port (25-pin Female)
COM1
COM2
Serial Ports (9-pin Male)
USB 1
USB 2
P4T
P4T IDE Connectors
Primary IDE Connector
®
Secondary IDE Connector
RJ-45 Port
PIN 1
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
FLOPPY
PIN 1
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
®
P4T
P4T Floppy Disk Drive Connector
GND
+12V
Rotation
Rotation
+12V
GND
MAIN_FAN
(for power supply fan)
CPU_FAN
P4T
P4T 12-Volt Cooling Fan Power
Rotation
+12V
GND
®
PCI_FAN
(for chassis fan)
Ground
SMBDATA
+5V
SMBCLK
®
1
P4T
SMB
Chassis Signal
GND
®
+5VSB_MB
P4T SMBus Connector
1
P4T
CHASSIS
P4T Chassis Open Alarm Lead
IMPORTANT: Requires an ATX power
supply with at least 720mA +5 volt
standby power
®
WOL
Ground
PME +5 Volt Standby
P4T
P4T Wake-On-LAN Connector
®
Ring# Ground
P4T
P4T Wake-On-Ring Connector
2
1
WOR
10
6
5
1
®
1: USB Power
2: USBP2–
3: USBP2+
4: GND
5: NC
6: USB Power
7: USBP3–
8: USBP3+
9: GND
USB2
P4T
P4T USB Headers
®
TIP: If the case-mounted LED
does not light, try reversing the
2-pin plug.
HDDLED
P4T
P4T Hard Disk Drive Activity LED
®
+
P4T
P4T SCSI LED Connector
1
SCSILED
IR
Front View
Back View
+5V
(NC)
IRRX
GND
IRTX
®
1
+5V
(NC)
IRTX
GND
P4T
IRRX
P4T Infrared Module Connector
TR2
®
P4T
P4T Thermal Sensor Connector
Thermal
Sensor
Connector
ATXPWR
Pin 1
+3.3VDC
-12VDC
COM
PS_ON#
COM
COM
COM
-5VDC
+5VDC
+5VDC
+3.3VDC
+3.3VDC
COM
+5VDC
COM
+5VDC
COM
PWR_OK
+5VSB
+12VDC
®
COM
+12V DC
Pin 1
COM
+12V DC
Pin 1
Key
P4T ATX & Auxiliary
Power Connectors
+5V
+3V
ATX12V
COM
P4T
AUXPWR
+5 V
PLED
Keylock
Ground
Power LED
Speaker
Connector
+5V
Ground
Ground
Speaker
Keyboard Lock
Message LED
SMI Lead
P4T
Reset
Ground
+5 V
MLED
ExtSMI#
Ground
PWR
Ground
®
Reset SW
ATX Power
Switch*
* Requires an ATX power supply.
P4T System Panel Connectors
®
P4T
P4T Clear RTC RAM
Intel I/O
Controller
Hub
(ICH2)
CLRTC
Short solder points
to Clear CMOS
LEDs
LAN Activity
Output Signal
Intel
Chipset
RJ45
Wake on LAN
Output Signal
ASUS
Motherboard type
Other
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Annotate, Fill forms, Extract, Assemble, Print high-res Create Date : 2000:12:18 18:16:14 Producer : Acrobat Distiller 4.0 for Macintosh Modify Date : 2000:12:19 14:21:14+08:00 Page Count : 120 Page Mode : UseThumbsEXIF Metadata provided by EXIF.tools