PartsManual S150X Series Jgipu KP.5Fz XFix2
User Manual: S150X Series
Open the PDF directly: View PDF 
.
Page Count: 64
| Download | |
| Open PDF In Browser | View PDF |
Parts Manual S150X Series N o R tf ep o r ro du ct io n Zero-Turn Riding Mower Models: Description: 5900884 S150XKAV2048, 48" 20HP Kawasaki Mid Mount Zero-Turn Rider 5900885 S150XKAV2252, 52" 22HP Kawasaki Mid Mount Zero-Turn Rider 5900843 S150XKAV2552, 52" 25HP Kawasaki Mid Mount Zero-Turn Rider 5900844 S150XKAV2552 CAL, 52" 25HP Kawasaki Mid Mount Zero-Turn Rider 5900909 S150XKAV2552CE 52" 25HP Kawasaki Mid Mount Zero-Turn Rider 5900845 S150XKOH2752 S/S, 52" 27HP Kohler Mid Mount Zero-Turn Rider 5900907 S150XKAV2652, 52" 26HP Kawasaki Mid Mount Zero-Turn Rider Briggs and Stratton Power Products Group, LLC 5375 North Main Street Munnsville, NY 13409 USA 800-933-6175 5102071 Revision P Rev. Date: 4/23/12 TP 400-7439-P-M1-SP n N o R tf ep o r ro du ct io Table Of Contents MODEL COMPONENTS PAGE N o R tf ep o r ro du ct io n Main Frame Group ............................................................................................................................................................. 4 Rear Bumper & ROPS Group ............................................................................................................................................ 6 Seat & Kick Plate Group .................................................................................................................................................... 8 Fuel Tank & Mount Group .................................................................................................................................................. 10 Instrument Control Panel Group ........................................................................................................................................ 12 Engine & PTO Group - Kawasaki Models ......................................................................................................................... 14 Engine & PTO Group - Kohler ........................................................................................................................................... 18 Pump Drive Group ............................................................................................................................................................. 20 Motion Control Group ......................................................................................................................................................... 22 Hydraulic Group ................................................................................................................................................................. 24 Hydraulic Components Service Group ............................................................................................................................... 26 Hydraulic Mount Group ...................................................................................................................................................... 28 Parking Brake Group ......................................................................................................................................................... 30 Deck Lift Group .................................................................................................................................................................. 32 Wheel & Tire Group ........................................................................................................................................................... 36 Decals - Brand ................................................................................................................................................................... 38 Decals - Safety & Operation .............................................................................................................................................. 40 Decal Group - Brand & Model ............................................................................................................................................ 42 Decal Group - Safety & Operation ..................................................................................................................................... 44 Decals - Safety & Operation (Export Models) .................................................................................................................... 46 48" & 52" Mower Deck - Hanger Chains ............................................................................................................................ 48 48" & 52" Mower Deck - Rollers ......................................................................................................................................... 50 48" & 52" Mower Deck - Housing, Covers, Spindles & Blades .......................................................................................... 52 48" & 52" Mower Deck - Pulleys, Belt & Idler Arm ............................................................................................................. 54 52" Mower Deck - Housing, Covers, Spindles & Blades (Export Models) ......................................................................... 56 Electrical Schematics ......................................................................................................................................................... 58-61 Torque Specification Chart ............................................................................................. Inside Back Cover Main Frame Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 4 TP 400-7439-P-M1-SP Main Frame Group REF NO. PART NO. 5025457 5020884 5025160 5025449 5025448 5100882 5021072 5402208D 5402927D 5020883 1722009 QTY. 2 4 2 4 2 2 2 2 1 4 1 DESCRIPTION BOLT, 1/4-28 X 1/2, GD5 YZ BEARING, TAPERED ROLLER, 1" WASHER, 3/4 SAE WASHER, BELLEVILLE - 1.500 X .755 NUT, 3/4-16, HEX JAM NYLON LOCK CAP, CASTER SPINDLE, LOW PROFILE SEAL, GREASE WELD, CASTER YOKE - RED WELD, MAIN FRAME, SNP 2552 - RED CUP, BEARING (SV) STRAP-BLACK RUBB N o R tf ep o r ro du ct io n 1 2 3 4 5 6 7 8 9 10 11 Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 5 TP 400-7439-P-M1-SP Rear Bumper & ROPS Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 6 TP 400-7439-P-M1-SP Rear Bumper & ROPS Group 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 PART NO. QTY. 5100267 5025396 5400844A 2 6 1 5100139 5101194 5025158 5025155 5025011X6 5025392 5403116D 5025017X24 5402793D 5402934D 5100383 5100079 5025018X10 5025098 5400847A 5100377 5100545 5025440 5101223 5101226 1 1 4 6 6 6 1 4 1 1 1 1 1 2 2 2 2 2 2 1 1 2 2 1 1 DESCRIPTION SCREW, 1/2-13 X 1.00, SHCS NUT, 1/2-13 HEX NYLOCK FLANGE PLATE, SEAT BELT ANCHOR - BLK (TWO USED ON MODELS WITH SUSPENSION SEAT) SEAT BELT, RETRACTING - ASSM (MODELS WITHOUT SUSPENSION SEAT) ROPS COMPLETE IN BOX, SNAPPER PRO 48/52 WASHER, 1/2 SAE WASHER, 5/16 SAE BOLT, 5/16-18 X 3/4 GD5 NUT, 5/16-18 HEX NYLOCK FLANGE PLATE, HEAT SHIELD - RED BOLT, 1/2-13 X 3 GD5 PLATE, CARB. SHIELD - RED WELD, PLATE, BUMPER - RED * ROLL BAR POST, RH (SV) * ROLL BAR POST, LH (SV) * ROLL BAR TOP LOOP (SV) RUBBER BUMPER (SV) * BOLT (SV) * NUT (SV) PIN, HITCH, BLACK W/ PLASTIC LANYARD (SV) BOLT, 1/2-20 X 1-1/4" GD8 YZ NUT, 1/2-20 HEX NYLON LOCK MOUNT, SEAT BELT - RH - BLK (MODELS WITHOUT SUSPENSION SEAT) ROLL BAR HARDWARE BAG (SV) (INCLUDES HITCH PIN) RUBBER WASHER (SV) WASHER, 1/2", GD9, YZ SEAT BELT, SUPER SLEEVE (MODELS WITH SUSPENSION SEAT) SEAT BELT, RETRACTING (MODELS WITH SUSPENSION SEAT) n 1 2 3 N o R tf ep o r ro du ct io REF NO. Footnotes NOTE: * Contact Yard Power Products Group Service Department at 1-800-933-8175 ext.709 for ROPS replacement parts. You must provide the Femco Inc. serial number for the ROPS system. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 7 TP 400-7439-P-M1-SP Seat & Kick Plate Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 8 TP 400-7439-P-M1-SP Seat & Kick Plate Group PART NO. QTY. 5101214 5025392 5600302 7078299 5402779D 5025155 5025011X8 5101013 5101011 5025394 5025156 5025013X22 5044617 1686907 5100636 5061599X1 5061599 5022612 5101214X1 5101214X2 5101214X3 5101214X4 5100548 1 12 1 2 1 4 6 1 1 2 2 2 2 1 1 1 1 2 1 1 1 1 4 DESCRIPTION SEAT, SUSP TYPE (KOHLER MODELS) NUT, 5/16-18 HEX NYLOCK FLANGE SEAT PLATE W/ DECALS, S150X (INCLUDES SAFETY DECALS) SPRING, SEAT SUPPORT (KAWASAKI MODELS) PLATE, FLOOR PAN - RED WASHER, 5/16 SAE BOLT, 5/16-18 X 1 GD5 YZ (KAWASAKI MODELS) SAFETY WALK, 11.50 X 15.00 SAFETY WALK, 8.00 X 15.00 NUT, 3/8-16 HEX NYLOCK FLANGE WASHER, 3/8 SAE BOLT, 3/8-16 X 2-3/4" GD5 YZ WASHER, .34 X 1.25 X 10 GA (KAWASAKI MODELS) ARM REST (SET OF TWO) (SV) (NON-SUSPENSION SEAT ONLY) SPRING, SEAT ADJUSTMENT (SV) (NON-SUSPENSION SEAT ONLY) KIT, SEAT RAILS, COMPLETE (SV) (NON-SUSPENSION SEAT ONLY) SEAT, XB-150, NO LOGO, BLACK (KAWASAKI MODELS) BUMPER, RUBBER (KOHLER MODELS) KIT, ARM REST, SET OF TWO, S/S (SV) (SUSPENSION SEAT ONLY) CUSHION, BACK, S/S (SV) (SUSPENSION SEAT ONLY) CUSHION, SEAT, S/S (SV) (SUSPENSION SEAT ONLY) KIT, ADJUSTER, S/S (SV) (SUSPENSION SEAT ONLY) WASHER, .390 X 1.50 X .109, YZ (SUSPENSION SEAT ONLY) n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 N o R tf ep o r ro du ct io REF NO. Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 9 TP 400-7439-P-M1-SP Fuel Tank & Mount Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 10 TP 400-7439-P-M1-SP Fuel Tank & Mount Group PART NO. QTY. 5101043 5102980 5101044 5102981 5402926D 5025011X6 5025155 5025170 5404330D 5025394 5025156 5023358 5022917 5022917X1 5101651 5103005 5020835 5050831X23 5050831X48 5050831X28 5600050 5101144 5050831X12 5404331D 5050833X18 5021178X3 5025013X8 5025392 5025011X8 1 1 1 1 1 14 16 12 1 4 4 1 2 2 2 2 6 1 1 1 2 2 1 1 1 1 4 4 2 DESCRIPTION TANK, FUEL, SNAPPER PRO - RH (S/N: 2014785118 & Below) TANK, FUEL, SNAPPER PRO - RH (S/N: 2014785119 & Above) TANK, FUEL, SNAPPER PRO - LH (S/N: 2014785118 & Below) TANK, FUEL, SNAPPER PRO - LH (S/N: 2014785119 & Above) WELD, TANK MOUNT - RED BOLT, 5/16-18 X 3/4 GD5 WASHER, 5/16 SAE WASHER, 5/16 LOCK YZ WELD, TANK MOUNT, REAR, RH NUT, 3/8-16 HEX NYLOCK FLANGE WASHER, 3/8 SAE VALVE, FUEL, STR. OUTLET FUEL GUAGE, 12" (SV) GROMMET, FUEL GUAGE (SV) CAP, FUEL TANK, 3-1/2 NECK (S/N: 2014785118 & Below) CAP, FUEL TANK, 3-1/2 NECK (S/N: 2014785119 & Above) CLAMP, HOSE, EXTERNAL, 1/2 - RED HOSE, LW PRMTN, 1/4" FUEL, 23.00" (SV) (Kawasaki engines only) HOSE, LW PRMTN, 1/4" FUEL, 48.00" (SV) HOSE, LW PRMTN, 1/4" FUEL, 28.00" (SV) KIT, BUSHING, FUEL (SV) PICKUP TUBE ASSEMBLY, FUEL LINE (SV) HOSE, LW PRMTN, 1/4" FUEL, 12.00" (SV) (Kohler engines only) WELD, TANK MOUNT, REAR, LH WIRE LOOM, 1/2 ID X 18.00" (SV) FILTER, FUEL BOLT, 3/8-16 X 1 GD5 YZ NUT, 5/16-18 HEX NYLOCK FLANGE BOLT, 5/16-18 X 1 GD5 YZ n 1 1 2 2 3 4 5 6 7 8 9 10 11 12 13 13 14 15 16 17 18 19 20 21 22 23 24 25 26 N o R tf ep o r ro du ct io REF NO. Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 11 TP 400-7439-P-M1-SP Instrument Control Panel Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 12 TP 400-7439-P-M1-SP Instrument Control Panel Group PART NO. QTY. 5402769A 5025487X4 5021518 5025271 5025270X16 5021603 5022805 5100184 5046501 5100184 5047912 5025035 5022222 5022180 5020927 5409263 5102417 5022269 1709188 5061763 5025179X6 5101537 5101073 5022789 5022790 5022791 5023499 5046360X1 1 3 1 4 2 4 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 2 1 DESCRIPTION PLATE, CONTROL PANEL, SNP - BLK BOLT, 1/4-20 X 1/2M ALLEN BUTTON HEAD YZ FUSE BLOCK (SV) NUT, #10-24 HEX NYLON LOCK SCREW, #10-24 X 2" ROUND PHILLIPS FUSE, ATP, 20 AMP (SV) COVER, VINYL FUSEBLOCK CABLE, CHOKE, 43.5" (Briggs & Stratton Models) CABLE, CHOKE, 47" (Kawasaki Models S/N: 2014954004 & Below) CABLE, CHOKE, 43.5" (Kawasaki Models S/N: 2014954005 & Above) CABLE, CHOKE, 56" (Kohler Models) NUT, 3/8-24 HEX RING, SWITCH RETAINER SWITCH, BLADE ENGAGEMENT SWITCH, IGNITION, 6 POST * HOUR METER, ASSEMBLY (S/N: 2015551938 & Above) HOUR METER (S/N: 2015551937 & Below) O-RING, 7/8 ID X 1/16 W PLUG, .820X1.44 HOLE, BLACK PLASTIC SPACER, .20 X .38 X 1.25 SCREW, 10-24 X 3/4 LEVER, THROTTLE, HEAVY DUTY CABLE, THROTTLE CONTROL, 42" KEY, IGNITION, MOLDED SET (SV) COVER (SV) PLASTIC NUT (SV) WASHER, #10 SAE KNOB, THROTTLE CONTROL n 1 2 3 4 5 6 7 8a 8b 8c 8d 9 10 11 12 13a 13b 14 15 16 17 18 19 20 21 22 23 24 N o R tf ep o r ro du ct io REF NO. Footnotes * When replacing this hour meter, please call our service department at 1-800-933-6175 ext. 709 The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 13 TP 400-7439-P-M1-SP Engine & PTO Group - Kawasaki Models N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900907 5900884 5900909 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 14 TP 400-7439-P-M1-SP Engine & PTO Group - Kawasaki Models QTY. 5025391 5047033 5022234 5100084 5025154 5021334X1 5102278X1 5100975 5102109 5102127 5025392 5021500 5043636 5044617 5046446 5025155 5025011X8 5025188 5025011X14 5050407X8 5102864 -- 1 1 1 1 1 1 1 1 1 1 10 1 1 4 2 6 4 4 5 1 1 1 19 -- 1 19 19 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 ---5025127 5025052X18 5021379 5048681 5023143 5023146 5023138 5023139 5023140 5023141 5023147 5023144 5023145 5023142 5023149 5023148 DESCRIPTION NUT, 1/4-20 HEX NYLOCK FLANGE SPACER, 1.13 X 1.75 X 1.03 ADAPTER, OIL DRAIN * CLUTCH, 5218-134, WARNER WASHER, 1/4 SAE OIL FILTER (49065-2078) (SV) (21 & 25 HP MODELS ONLY) OIL FILTER (20, 22 & 26 HP MODELS ONLY) MUFFLER, 21HP-25HP KAWASAKI ENGINES (21 & 25 HP MODELS ONLY) MUFFLER, (16-20HP), KAWASAKI S50X (20 HP MODELS ONLY) MUFFLER, 22HP KAWASAKI, HORIZONTAL (22 & 26 HP MODELS ONLY) NUT, 5/16-18 HEX NYLOCK FLANGE CLAMP, VINYL INSULATED CLUTCH ANCHOR PAD WASHER, .34 X 1.25 X 10 GA SPACER, .39 X 1.00 X .80 WASHER, 5/16 SAE BOLT, 5/16-18 X 1 GD5 YZ WASHER, 5/16" INT. TOOTH LOCK BOLT, 5/16-18 X 1-3/4 GD5 YZ KEY, 1/4 SQ. X 1.00 BOLT, CRANKSHAFT, 7/16 X 2-1/2 (Torque to 65 fl lbs (88 Nm) * ENGINE, 21HP KAWASAKI, (Mod FH641V Spec. ES25-R) (21 HP MODELS ONLY) * ENGINE, 25HP KAWASAKI, (Mod. FH721V Spec. ES27-R) (25 HP MODELS ONLY) * ENGINE, 20HP, KAWASAKI, FX600V (20 HP MODELS ONLY) * ENGINE, 22HP KAWASAKI, FX651V (22 HP MODELS ONLY) * ENGINE, 26HP KAWASAKI, FX730V (26HP MODELS ONLY) NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) BOLT, 5/16-18 X 2-1/4 TFL, GD5 YZ GROMMET, 7/8 HOSE, OIL DRAIN RAIN COVER (SV) CLAMP (SV) AIR FILTER ASSEMBLY (SV) CASE, AIR FILTER (SV) AIR FILTER, SECONDARY (SV) AIR FILTER, PRIMARY (SV) CLAMP, CAP (SV) CAP, FILTER CASE (SV) CASE, BRACKET, COMPLETE (SV) BRACKET PLATE (SV) AIR INLET TUBE (SV) BREATHER TUBE (SV) n PART NO. 1 2 3 4 5 6 6 7 7 7 8 9 10 11 12 13 14 15 16 17 18 19 N o R tf ep o r ro du ct io REF NO. 1 1 1 1 1 1 1 1 3 1 1 1 1 2 1 1 1 1 1 Footnotes * For models S/N: 2015375705 & Below, when replacing the clutch, the jumper harness (#5403576) is required. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900907 5900884 5900909 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 15 TP 400-7439-P-M1-SP Engine & PTO Group - Kawasaki Models N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900907 5900884 5900909 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 16 TP 400-7439-P-M1-SP Engine & PTO Group - Kawasaki Models REF NO. PART NO. QTY. 5025010X6 1724815 5025126 5023217 5023216 5100062 5048135 5044062 5101641 5100969 5025532 5101022 5025531 1 1 1 2 2 1 1 1 1 1 4 1 1 DESCRIPTION BOLT, 1/4-20 X 3/4 GD5 YZ SOLENOID-4 POLE 12 VOLT DC (TROMBETTA) NUT, 1/4-20 HEX SERR. FLANGE WASHER, 5/16 LIGHT LOCK (SV) NUT, 5/16-24 JAM (SV) SPACER, 1.13 X 1.75 X .32 (21HP & 25HP MODELS ONLY) SPACER, 1.13 X 1.75 X .62 (20HP & 26HP MODELS ONLY) SPACER, 1.13 X 1.75 X .50 (22 HP MODELS ONLY) SCREEN, SPARK ARRESTER EXTENSION, TAILPIPE, 3" (20 HP MODELS ONLY) BOLT,HEX FLG,SER GD5 3/8-16X1-1/4PACH CZ (20 HP MODELS ONLY) PULLEY, 5.15 OD X 1-1/8 BORE B-SECT SET SCREW, 5/16-18 X 3/8, KNURL, W/PATCH N o R tf ep o r ro du ct io n 37 38 39 40 41 42 42 42 43 44 45 46 47 Footnotes * For models S/N: 2015375705 & Below, when replacing the clutch, the jumper harness (#5403576) is required. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900907 5900884 5900909 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 17 TP 400-7439-P-M1-SP Engine & PTO Group - Kohler N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900845 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 18 TP 400-7439-P-M1-SP Engine & PTO Group - Kohler PART NO. QTY. 5025391 5047033 5022892X4 5100084 5025154 5021144X1 5101275 5025392 5021500 5043636 5044617 5101289 5025155 5025011X8 5025188 5025011X14 5050407X8 5045289 5025127 5025052X18 5021379 5048681 5046416A 5025010X6 5022892X2 5022892X1 5022892X5 5022892X3 5022892X8 5022892X9 5022892X6 5101022 5101641 5025531 1 1 1 1 1 1 1 1 1 1 4 2 6 4 4 5 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 DESCRIPTION NUT, 1/4-20 HEX NYLOCK FLANGE SPACER, 1.13 X 1.75 X 1.03 KIT, 5.5" HD AIR CLEANER (24 743 22-S) (SV) * CLUTCH, 5218-134, WARNER WASHER, 1/4 SAE OIL FILTER (SV) MUFFLER, KOHLER 21 HP - 27 HP NUT, 5/16-18 HEX NYLOCK FLANGE CLAMP, VINYL INSULATED CLUTCH ANCHOR PAD WASHER, .34 X 1.25 X 10 GA SPACER, 1.13 X 1.75 X .75 WASHER, 5/16 SAE BOLT, 5/16-18 X 1 GD5 YZ WASHER, 5/16" INT. TOOTH LOCK BOLT, 5/16-18 X 1-3/4 GD5 YZ KEY, 1/4 SQ. X 1.00 BOLT, CRANKSHAFT, 7/16"X2-1/2 * ENGINE, 27HP KOHLER NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) BOLT, 5/16-18 X 2-1/4 TFL, GD5 YZ GROMMET, 7/8 HOSE, OIL DRAIN ANCHOR, CLUTCH - BLK BOLT, 1/4-20 X 3/4 GD5 YZ AIR FILTER, SECONDARY (SV) AIR FILTER, PRIMARY (SV) END CAP (25 096 06-S) (SV) * ENGINE, 23HP KOHLER RAIN COVER (SV) BRACKET (25 126 02-S) (SV) AIR INLET TUBE (25 326 53-S) (SV) DUST CAP (24 462 07-S) (SV) PULLEY, 5.15 OD X 1-1/8 BORE B-SECT SCREEN, SPARK ARRESTER SET SCREW, 5/16-18 X 3/8, KNURL, W/PATCH n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 N o R tf ep o r ro du ct io REF NO. Footnotes * For models S/N: 2015375705 & Below, when replacing the clutch, the jumper harness (#5403576) is required. The above parts group applies to the following Mfg. Nos.: 5900845 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 19 TP 400-7439-P-M1-SP Pump Drive Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 20 TP 400-7439-P-M1-SP Pump Drive Group REF NO. PART NO. QTY. 5101023 5022587 5023254 5100923 5025013X32 5046430A 5022157 5025305 5102004 5045475 5101193 5025013X18 5025394 5025013X14 5022847 5025010X8 5025034 5023497 2 2 2 1 1 1 2 1 1 1 1 1 4 1 1 4 2 1 DESCRIPTION PULLEY, SPLIT STEEL 5.632 OVER BALL BUSHING, TAPERED HUB KEY, 5MM SQ. W/ RADIUS BELT, #7-9502, B-SECT - EL 67.8, HYDRO BOLT, 3/8-16 X 4 GD5 YZ WELD, ARM, PUMP DRIVE IDLER - BLK BUSHING, BRASS, 1.25X1X1.25 WASHER, .41 X 1.75 X .14 SPACER, .39 X 1.00 X 2.55, SS SPACER, .45 X 1.88 X .38 PULLEY, IDLER BOLT, 3/8-16 X 2-1/4 GD5 YZ NUT, 3/8-16 HEX NYLOCK FLANGE BOLT, 3/8-16 X 1-3/4 GD5 SPRING, EXTENSION, SWIVEL END BOLT, 1/4-20 X 1", GD5 NUT, 3/8-16 HEX EYE BOLT, 3/8-16 X 5", 1 EYE N o R tf ep o r ro du ct io n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 21 TP 400-7439-P-M1-SP Motion Control Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 22 TP 400-7439-P-M1-SP Motion Control Group PART NO. QTY. 5010546 5101077 5021146 5021499 5022068 5022628 5022645 5023260 5025033 5025210 5047004A 5025394 5100940 5100941 5100942 5100947 5101135 5400636A 5400637A 5025170 5025155 5402622D 5402931D 5402932D 5025011X6 5022095 5025139 5025013X14 5025096 5025156 5025011X8 5025011X9 5025011X10 5025127 5020639 5025392 5025179X4 5025029 2 2 2 2 2 2 2 2 6 2 2 4 2 4 2 2 2 1 1 4 8 2 1 1 2 2 2 6 8 2 6 4 6 14 2 14 4 4 DESCRIPTION COLLAR, 3/8" SET BEARING, 3/4" PILLOW BLOCK BALL JOINT, 5/16-24, FEMALE BEARING, FLANGE GRIP, FOAM, 3/4 ID, 16 LONG BALL JOINT, 5/16-24, LH FEMALE SPRING, REVERSE RETURN BUSHING, NYLON NUT, 5/16-24 HEX PIN, HAIR, .0915 X 1-7/8 MOUNT, CONTROL ARM - BLK NUT, 3/8-16 HEX NYLOCK FLANGE DAMPENER, CONTROL,#(P6709/P3610) BALL STUD, 5/16 X .50,# PC-477-2) BUSHING, FLANGED .375 X .630 X 2.00 ROD, NEUTRAL RETURN ROD, HYDRO LINKAGE WELD, HANDLE MOTION CONTROL, LH - BLK WELD, HANDLE MOTION CONTROL, RH - BLK WASHER, 5/16 LOCK YZ WASHER, 5/16 SAE PLATE, PUMP SUPPORT - RED WELD, CONTROL SHAFT, RH, SNP 2552 - RED WELD, CONTROL SHAFT, LH, SNP 2552 - RED BOLT, 5/16-18 X 3/4 GD5 SWITCH, PLUNGER, N.O./N.C. NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) BOLT, 3/8-16 X 1-3/4 GD5 NUT, 3/8-16 HEX NYLON LOCK WASHER, 3/8 SAE BOLT, 5/16-18 X 1 GD5 YZ BOLT, 5/16-18 X 1-1/8 GD5 BOLT, 5/16-18 X 1-1/4 GD5 YZ NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) SPRING, EXTENSION NUT, 5/16-18 HEX NYLOCK FLANGE SCREW, #10-24 X 1/2 ROUND PHILLIPS NUT, #10-24 HEX n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 N o R tf ep o r ro du ct io REF NO. Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 23 TP 400-7439-P-M1-SP Hydraulic Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 24 TP 400-7439-P-M1-SP Hydraulic Group PART NO. 5023338 5023267 5022920 5050860X7P5 5050860X22 5050933X24P5 5100017 5061712 5021164 5023268 5100384X20 5023118 5022042X2 5022042X3 5100670 5100671 5025010X6 5025154 5025169 5025013X10 5025128 5100162 5025203X16 5102099 5023266 5023461 1719168 5023096 5100678 5050860X6P5 5022922 5050860X20 5023120 5023121 5023119 5022571X1 QTY. 4 2 1 2 1 1 1 1 2 5 1 1 2 2 1 1 2 2 2 4 4 2 2 4 1 2 1 1 1 1 1 1 1 1 1 2 DESCRIPTION Refer to Hydraulic Components Service Group FITTING, #8 JIC - #8 O-RING, 45 DEG. ADAPTER, 90 DEG, 9/16-3/8 BARB FITTING, TEE, 1/2 HOSE HOSE, 3/8 PUSH-LOCK, 7.5" LONG HOSE, 3/8 PUSH-LOCK, 22" LONG (SV) HOSE, 5/8, PUSH-LOCK, 24.5" LONG CAP, HYDRAULIC TANK, HYDRAULIC, ASSEMBLY CLAMP, #10 HOSE, STAINLESS CLAMP, HOSE LOOM, CONVOLUTED SPLIT, 1 ID X 20 IN FITTING, ELBOW, 3/8" (SV) KEY, WOODRUFF (SV) NUT, CASTLE 1-20 (SV) PUMP, HYDRO-GEAR, 12CC - LH PUMP, HYDRO-GEAR, 12CC - RH BOLT, 1/4-20 X 3/4 GD5 YZ WASHER, 1/4 SAE WASHER, 1/4 LOCK BOLT, 3/8-16 X 1-1/4 GD5 NUT, 3/8-16 HEX SERRATED FLANGE FAN SHROUD PIN, COTTER, 1/8 X 2 HOSE, ASSEMBLY, 22.5 ADAPTER, TEE, 9/16 - 3/8 BARB ADAPTER, 45 DEG, 9/16-3/8 BARB FILTER, OIL FILTER HEAD, HYDRAULIC FITTING, STRAIGHT, HYD #12618 HOSE, 3/8 PUSH-LOCK, 6.5" LONG CLAMP, #4 HOSE, STAINLESS HOSE, 3/8 PUSH-LOCK, 20" LONG (SV) GROMMET (SV) GROMMET (SV) FITTING, ELBOW 5/8 (SV) FAN, HYD. PUMP (SV) n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 N o R tf ep o r ro du ct io REF NO. Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 25 TP 400-7439-P-M1-SP Hydraulic Components Service Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 26 TP 400-7439-P-M1-SP Hydraulic Components Service Group PART NO. QTY. 1 2 3 4 5 6 7 8 9 5022633 5025017X22 5025056 5102682 5102681 5022634 5025475 5025330 4 8 8 1 1 4 8 8 DESCRIPTION No Longer Available. Use "B" Service Parts FITTING, #8 O-RING X #8 JIC, STR BOLT, 1/2-13 X 2-3/4 GD5 YZ NUT, 1/2-13 HEX NYLON LOCK WHEEL MOTOR, LH, 14.5 CI-TF0240LS080AAKZ WHEEL MOTOR, RH, 14.5 CI-TF0240LS081AAKZ FITTING, #10 O-RING X #8 JIC, STR BOLT, 1/2-13 X 2-1/2, NYLON PATCH NUT, 1/2-13 SQUARE N o R tf ep o r ro du ct io n REF NO. Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 27 TP 400-7439-P-M1-SP Hydraulic Mount Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 28 TP 400-7439-P-M1-SP Hydraulic Mount Group PART NO. QTY. 1 2 3 4 5 5025011X8 5025155 5402781D 5025392 5023173 8 8 1 8 1 DESCRIPTION BOLT, 5/16-18 X 1 GD5 YZ WASHER, 5/16 SAE PLATE, MOUNT, RESERVOIR - RED NUT, 5/16-18 HEX NYLOCK FLANGE CLAMP, HOSE, 1.000 DIA. N o R tf ep o r ro du ct io n REF NO. Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 29 TP 400-7439-P-M1-SP Parking Brake Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 30 TP 400-7439-P-M1-SP Parking Brake Group PART NO. QTY. 5402928D 5020979 5021098 5022361 5021494 5023324 5102896 5023490 5023500 5102897 5023501 5102898 5025337 5041930 5042134 5101038 5025213X8 5047084A 5025170 5025013X6 5025394 5025011X14 5025045 5025155 5025128 5021397 5025156 5025392 5025203X10 5025013X12 5025011X10 5025127 5022182 5403278D 5025126 5025010X6 5025154 5023368X1 1 2 2 2 2 2 2 8 1 1 1 1 2 2 2 1 2 2 8 4 6 2 2 2 2 2 2 2 2 2 2 2 2 1 2 2 2 10 DESCRIPTION WELD, BRAKE SHAFT, SNP 2552 - RED CLEVIS, 5/16-24, PLASTIC BEARING, BRONZE FLANGE, 3/4 SPRING, BRAKE SPRING, COMPRESSION, 5-1/2 CABLE, PARKING BRAKE BRAKE DRUM, 6", 5 BOLT, KNOTT BOLT, 5/16-18 X 3/4 12PT FLANGE - PATCH ASSM, BRAKE, 1-1/4 HUB, LH (S/N: 2015208611 & Below) BRAKE SHOE ASM, LH, KNOTT (S/N: 2015208612 & Above) ASSM, BRAKE, 1-1/4 HUB, RH (Not Shown - S/N: 2015208611 & Below) BRAKE SHOE ASM, RH, KNOTT (Not Shown - S/N: 2015208612 & Above) WASHER, 5/16 USS SPACER, .38 X .50 X .27 SPACER, .32 X .75 X 1.06 GRIP, FOAM, 3/4 ID X 6 X .187 PIN, CLEVIS, 5/16 X 1 YZ LINK, BRAKE LOCK - BLK WASHER, 5/16 LOCK YZ BOLT, 3/8-16 X 3/4 GD5 YZ NUT, 3/8-16 HEX NYLOCK FLANGE BOLT, 5/16-18 X 1-3/4 GD5 YZ NUT, 5/16-24 HEX NYLON LOCK WASHER, 5/16 SAE NUT, 3/8-16 HEX SERRATED FLANGE GROMMET, 1-1/4 WASHER, 3/8 SAE NUT, 5/16-18 HEX NYLOCK FLANGE PIN, COTTER, 1/8" X 1-1/4 BOLT, 3/8-16 X 1-1/2 GD5 YZ BOLT, 5/16-18 X 1-1/4 GD5 YZ NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) SWITCH, PLUNGER BRACKET, SWITCH MOUNT NUT, 1/4-20 HEX SERR. FLANGE BOLT, 1/4-20 X 3/4 GD5 YZ WASHER, 1/4 SAE STUD, BRAKE HUB (SV) n 1 2 3 4 5 6 7 8 9 9A 10 10A 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 N o R tf ep o r ro du ct io REF NO. Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 31 TP 400-7439-P-M1-SP Deck Lift Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 32 TP 400-7439-P-M1-SP Deck Lift Group PART NO. QTY. 5025440 5025098 5025394 5025156 5020870 5025010X6 5025126 5025154 5025034 5020639 5402933D 5025017X22 5025396 5025013X10 5025018X18 5020441 5023355 5021811 5025100 5025212X7 5025210 5100548 5025443 5025018X14 5402815A 1715834 5061569A 5025328X12 5402814A 5025089 5020095 5023343 5022434 5061670 5020020 5403315D 5407586A 5025146X16 5400719A 5400769D 5021880 5023174 12 5 6 14 4 2 2 2 2 1 1 1 1 2 1 2 1 1 1 1 2 4 4 4 1 1 1 2 1 7 2 4 1 1 2 1 1 1 1 1 1 2 DESCRIPTION WASHER, 1/2 GD9 YZ NUT, 1/2-20 HEX NYLON LOCK NUT, 3/8-16 HEX NYLOCK FLANGE WASHER, 3/8 SAE INSERT, BEARING BOLT, 1/4-20 X 3/4 GD5 YZ NUT, 1/4-20 HEX SERR. FLANGE WASHER, 1/4 SAE NUT, 3/8-16 HEX SPRING, EXTENSION WELD, SHAFT, DECK LIFT, SNP (S/N: 2013206817 & Below) BOLT, 1/2-13 X 2-3/4 GD5 NUT, 1/2-13 HEX NYLOCK FLANGE BOLT, 3/8-16 X 1-1/4 GD5 (S/N: 2013206817 & Below Qty. 6) BOLT, 1/2-20 X 2-1/4" GRD5 COLLAR, 5/8" SPLIT SPRING, DECK LIFT ASSIST EYE BOLT, 3/8-16 X 8", 1" EYE NUT, 3/8-16 HEX SIDE LOCK PIN, CLEVIS, 1/4 X 7/8 PIN, HAIR, .0915 X 1-7/8 WASHER, .390 X 1.50 X .109, YZ BOLT, 3/8-16 X 3/4, GD5, YZ WITH PATCH BOLT, 1/2-20 X 1-3/4 GD5 YZ PIVOT, DECK LIFT WELD - RIGHT - BLK RUBBER, FOOT PEDAL PEDAL, FOOT - BLK PIN, CLEVIS, 1/2 X 1 1/2, YZP PIVOT, DECK LIFT WELD - LEFT - BLK NUT, 1/2-20 HEX JAM GREASE FITTING, 1/4-28 STRAIGHT BUSHING, 1.00 X 1.13 X 1.38, PLASTIC BALL JOINT, 1/2-20, MALE SPACER, .53 X 1.00 X 1.00 GREASE FITTING, 1/4-28 STRAIGHT WELD, DECK STABILIZER - RED (S150X Models) WELD, DECK STABILIZER - BLK (S150XT Models) BOLT, 3/8-16 X 2, CARRIAGE WELD, ROD DECK LIFT - BLK WELD, DECK ADJUST LINK - RED GRIP, FOAM CLEVIS, 1/2-20, STEEL n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 36 37 38 39 40 41 N o R tf ep o r ro du ct io REF NO. Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 33 TP 400-7439-P-M1-SP Deck Lift Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 34 TP 400-7439-P-M1-SP Deck Lift Group REF NO. PART NO. QTY. 5101218 5023498 5050857X1 5025013X22 5100634 5403925A 5404303D 5407406D 5048549 2 1 1 4 4 2 1 1 1 DESCRIPTION ROD,DECK LIFT ADJUSTMENT PIN, HITCH, 1/2 X 2.00 OAL, YP HOSE, 1/2" PUSH-ON, 1.00" BOLT, 3/8-16 X 2-3/4 GD5 YZ (S/N: 2013206818 & Above) PIVOT BLOCK, PLASTIC (S/N: 2013206818 & Above) PLATE, PIVOT BLOCK SUPPORT - BLK (S/N: 2013206818 & Above) WELD, DECK LIFT SHAFT (S/N: 2013206818 & Above) (S150X Models) WELD, DECK LIFT SHAFT (S150XT Models) COLLAR, 1" DOUBLE SPLIT (S/N: 2013206818 & Above) N o R tf ep o r ro du ct io n 42 43 44 45 46 47 48 48 49 Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 35 TP 400-7439-P-M1-SP Wheel & Tire Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 36 TP 400-7439-P-M1-SP Wheel & Tire Group REF NO. PART NO. QTY. 5022631S 5022029X1 5022631SX1 5022631SX2 5022631SX3 5047103 5025017X64 5025396 5023369 5023369X2 5023369X1 5020601 5025158 5023280 5100006 5100006X1 5022631SX4 2 2 2 4 4 4 2 2 2 2 2 10 2 2 2 2 2 DESCRIPTION WHEEL & TIRE ASSEMBLY, 13 x 5.0 - 6 (S150X Models) TIRE, 13 x 5.0 - 6 WHEEL ASSEMBLY, for 13 x 5.0 - 6 Tire (Includes Ref No. 4 & 5) BEARING, Tapered Roller (2 per tire) GREASE SEAL (2 per tire) ADAPTER, Caster Wheel (2 per tire) BOLT, 1/2-13 x 8" NUT, 1/2-13 HEX NYLOCK FLANGE WHEEL & TIRE ASSEMBLY, 22 x 11 - 10 (S150X Models) TIRE, 22 X 11.0 - 10 (SV) WHEEL ASSEMBLY, 10 X 7 (SV) LUG NUT, 1/2-20 WASHER, 1/2" SAE * FLAT-FREE TIRE ASSEMBLY, 13 x 5.0 - 6 WHEEL & TIRE ASSEMBLY, 22 X 10 - 10 (48" MODELS ONLY) TIRE, 22 X 10.00 -10 (48" MODELS ONLY) BEARING, RACE (SV) (Not shown) N o R tf ep o r ro du ct io n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Footnotes NOTE: * Solid urethane tire assembly. Wheel is not serviceable. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 37 TP 400-7439-P-M1-SP Decals - Brand N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 38 TP 400-7439-P-M1-SP Decals - Brand REF NO. PART NO. 5022811 5022812 5101256 5101201 5101284 QTY. 1 1 1 1 1 DESCRIPTION DECAL, 48 (48" MODELS ONLY) DECAL, 52 (52" MODELS ONLY) DECAL, S150X, FRONT DECAL, SNAPPER PRO, HEAT DECAL, S150X N o R tf ep o r ro du ct io n 1 2 3 4 5 Footnotes The above parts group applies to the following Mfg. Nos.: 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 39 TP 400-7439-P-M1-SP Decals - Safety & Operation N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 40 TP 400-7439-P-M1-SP Decals - Safety & Operation REF NO. PART NO. 5100097 5101292 5100088 5100708 5100709 1725941 5102290 5100342 5061724 5100280 5048970 5100957 5046503 5100405 5100406 5100403 5100404 5100683 5100684 QTY. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 DESCRIPTION DECAL, MAIN SAFETY DECAL, DANGER, MOWER DISCHARGE DECAL, DANGER, MOWER DECAL, DANGER, FIRE DECAL, DANGER, FIRE (SP) DECAL, CZT HYDRO RELEASE DECAL, BELT & BLADE DECAL, FUEL VALVE DECAL-HEIGHT CITATION DECAL, THROTTLE CONTROL DECAL, IGNITION SWITCH DECAL, OIL RESEVOIR DECAL, FUSE LOCATION DECAL, WARNING, ROLL BAR (SV) DECAL, WARNING, ROLL BAR, SP (SV) DECAL, WARNING, ROLL BAR (SV) DECAL, WARNING, ROLL BAR, SP (SV) DECAL, WARNING, ROLL BAR DECAL, WARNING, ROLL BAR, SP N o R tf ep o r ro du ct io n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Footnotes The above parts group applies to the following Mfg. Nos.: 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 41 TP 400-7439-P-M1-SP Decal Group - Brand & Model N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900909 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 42 TP 400-7439-P-M1-SP Decal Group - Brand & Model REF NO. PART NO. 5022812 5022811 5101256 5101201 5101284 5103011 5102210 QTY. 1 1 1 1 1 1 1 DESCRIPTION DECAL, 52 (52" Models) DECAL, 48 (48" Models) DECAL, S150X, FRONT DECAL, SNAPPER PRO, HEAT DECAL, S150X (S150X Models) DECAL, S150XT (S150XT Models) DECAL, iCD CUTTING SYSTEM N o R tf ep o r ro du ct io n 1 2 3 4 5 5 6 Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900909 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 43 TP 400-7439-P-M1-SP Decal Group - Safety & Operation N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 44 TP 400-7439-P-M1-SP Decal Group - Safety & Operation REF NO. PART NO. 5100097 5101292 5100088 5100708 5100709 1725941 5101064 5100342 5061724 5100280 5048970 5100957 5046503 5100405 5100406 5100403 5100404 5100683 5100684 QTY. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 DESCRIPTION DECAL, MAIN SAFETY DECAL, DANGER, MOWER DISCHARGE DECAL, DANGER, MOWER DECAL, DANGER, FIRE DECAL, DANGER, FIRE (SP) DECAL, CZT HYDRO RELEASE DECAL, BELT & BLADE, SNAPPER PRO 48/52 DECAL, FUEL VALVE DECAL-HEIGHT CITATION DECAL, THROTTLE CONTROL DECAL, IGNITION SWITCH DECAL, OIL RESEVOIR DECAL, FUSE LOCATION DECAL, WARNING, ROLL BAR (SV) DECAL, WARNING, ROLL BAR, SP (SV) DECAL, WARNING, ROLL BAR (SV) DECAL, WARNING, ROLL BAR, SP (SV) DECAL, WARNING, ROLL BAR DECAL, WARNING, ROLL BAR, SP N o R tf ep o r ro du ct io n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 45 TP 400-7439-P-M1-SP Decals - Safety & Operation (Export Models) N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900909 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 46 TP 400-7439-P-M1-SP Decals - Safety & Operation (Export Models) REF NO. PART NO. 5102627 5102420 5102457 5100685 5100537 5100536 5101990 5102290 5100342 5061724 5100280 5048970 5100957 5046503 1739263 5102456 5102628 QTY. 1 2 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 DESCRIPTION DECAL, MAIN SAFETY, ANSI CE DECAL, DANGER, MOWER DECK, ANSI EXP DECAL, DANGER DISCHARGE ANSI EXPORT DECAL, WARNING, ROLL BAR, CE DECAL, SAFETY, CE ROPS, OBS DECAL, SAFETY, CE ROPS DECAL, CZT HYRDO RELEASE (Located under seat plate.) DECAL, BELT & BLADE, S150XiCD DECK (Located under seat plate.) DECAL, FUEL VALVE DECAL-HEIGHT CITATION DECAL, THROTTLE CONTROL DECAL, IGNITION SWITCH DECAL, HYDRAULIC OIL, SAE 20W50 DECAL, FUSE LOCATION CE BATTERY DECAL, SMALL (Located on the battery,) DECAL, FIRE ANSI EXPORT DECAL, PARKING BRAKE SYMBOLS N o R tf ep o r ro du ct io n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Footnotes The above parts group applies to the following Mfg. Nos.: 5900909 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 47 TP 400-7439-P-M1-SP 48" & 52" Mower Deck - Hanger Chains N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 48 TP 400-7439-P-M1-SP 48" & 52" Mower Deck - Hanger Chains REF NO. PART NO. 5025038 5025396 5025158 5025128 5025013X16 5025156 5050878X3 5047503 5025084 5025096 - QTY. 2 2 2 4 6 12 2 2 4 4 DESCRIPTION MOWER DECK (SEE HOUSING, COVERS, SPINDLE & BLADE GROUP) NUT, 1/2-13 HEX NUT, 1/2-13 HEX NYLOCK FLANGE WASHER, 1/2 SAE NUT, 3/8-16 HEX SERRATED FLANGE BOLT, 3/8-16 X 2 GD5 YZ WASHER, 3/8 SAE CHAIN, 5/16 GD30, 3 LINKS HANGER, FRONT DECK - 2 LINK NUT, 3/8-16 HEX JAM NUT, 3/8-16 HEX NYLON LOCK DECK LIFT PIVOT (SEE DECK LIFT GROUP) N o R tf ep o r ro du ct io n 1 2 3 4 5 6 7 8 9 10 11 12 Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 49 TP 400-7439-P-M1-SP 48" & 52" Mower Deck - Rollers N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 50 TP 400-7439-P-M1-SP 48" & 52" Mower Deck - Rollers PART NO. QTY. 1 2 3 4 5 6 7 8 9 5025156 5025394 5046586 5025158 5025013X48 2108765 1960027 1714760 2 4 2 2 2 2 4 4 DESCRIPTION MOWER DECK WASHER, 3/8" SAE NUT, 3/8-16 HEX NYLOCK FLANGE SPACER, .38 X .50 X 5.06 WASHER, 1/2 SAE BOLT, 3/8-16 X 6 GD5 YZ BOLT-WHEEL 3/8-16X2.781 .750 THRD YELLOW WASHER-0500(0.51IDX0.87ODX.06THK) BLK GAUGE WHEEL N o R tf ep o r ro du ct io n REF NO. Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 51 TP 400-7439-P-M1-SP 48" & 52" Mower Deck - Housing, Covers, Spindles & Blades N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 52 TP 400-7439-P-M1-SP 48" & 52" Mower Deck - Housing, Covers, Spindles & Blades PART NO. QTY. 5101756S 5101986S 5022308 5023156 5025045 5025155 5025477 5025392 5025394 5025411 5042555 5061300 5061095 5101004 5100842 5402403 5025145X6 5025320X14 5049881D 5405037D 5049882D 5061811D 5061293D 5407842D 5402360A 5402362A 5401344A 5405557A 5600382 5600524 5600549 5025013X10 5025011X6 5408810D 5025156 5102015 5102134 5405238A 5405520A 5025011X8 5600131 5600515 5025498 5406204D 3 3 6 12 2 14 3 22 7 1 1 1 3 1 1 1 2 3 1 1 1 1 1 1 1 1 1 1 1 1 1 6 6 1 4 1 1 1 1 6 1 1 2 1 DESCRIPTION BLADE, 18 X .25 X 2.5, 1 X 3.5 (SET OF 3) (52" Models) BLADE, 16.25 X.25 X 2.5, 1 X 3.5 (SET OF 3) (48" Models) BODY CLIP, 5/16-18-7GA MATERIAL BOLT, 5/16-18 X 1 1/4 FLANGE NUT, 5/16-24 HEX NYLON LOCK WASHER, 5/16 SAE WASHER, 5/8 GRADE 8, YZ NUT, 5/16-18 HEX NYLOCK FLANGE NUT, 3/8-16 HEX NYLOCK FLANGE BOLT, 5/16-18 X 3/4 FLANGE ROD, 5/16 X 13.75, TBE, CZ (48" Models) ROD MOUNT, CHUTE 61" (52" Models) ASSM, SPINDLE, LOW PROFILE SAFETY WALK, 4.00 X 7.50 CHUTE, DISCHARGE, RUBBER, 44/48/52 (48" Models) CHUTE, DISCHARGE, RUBBER, 61/72 (52" Models) BOLT, 5/16-18 X 3/4, CARRIAGE BOLT, 5/8-11 X 1-3/4 GD8 GUARD, 48 DECK - RH -RED (48" Models) GUARD, 52" DECK - RH - RED (52" Models) GUARD, 48 DECK - LH -RED (48" Models) GUARD, 52" DECK - LH - RED (52" Models) WELD, FRAME, CHUTE, 61 - SNP RED (52" Models) WELD, FRAME, CHUTE (48" Models) SUPPORT, DISCHARGE CHUTE - BLK (52" Models) SUPPORT,DISCHARGE CHUTE - BLK (48" Models) PLATE, DEFLECTOR - BLK (48" Models) PLATE, DEFLECTOR - BLK (52" Models) DECK SHELL W/ DECALS, 52 - S150XCE (52" Export Models) DECK SHELL W/ DECALS, 52 - S150X (52" Models) DECK SHELL W/ DECALS, 48 - S150X (48" Models) BOLT, 3/8-16 X 1-1/4 GD5 BOLT, 5/16-18 X 3/4 GD5 PLATE, BRACKET, ANTI SCALP - RED WASHER, 3/8 SAE FLAP, STRIPER, 52 DECK (52" Models) FLAP, RUBBER, 48" (48" Models) PLATE, SUPPORT - BLK (52" Models) PLATE, SUPPORT, 48 - BLK (48" Models) BOLT, 5/16-18 X 1 GD5 YZ KIT, DISCHARGE CHUTE - 52 (52" Models) KIT, DISCHARGE CHUTE - 48 (48" Models) 5/16 PUSH-ON NUT RETAINER, STL, CZ BAFFLE, FRONT DISCHARGE, LH,S150XCE, RED (52" Export Models) n 1b 1a 2 3 4 5 6 7 8 9 10b 10a 11 12 13a 13b 14 15 16b 16a 17b 17a 18a 18b 19b 19a 20b 20a 21c 21a 21b 22 23 24 25 26a 26b 27b 27a 28 29a 29b 30 31 N o R tf ep o r ro du ct io REF NO. Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 53 TP 400-7439-P-M1-SP 48" & 52" Mower Deck - Pulleys, Belt & Idler Arm N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 54 TP 400-7439-P-M1-SP 48" & 52" Mower Deck - Pulleys, Belt & Idler Arm QTY. 5050407X10 5020095 5021541 5600184 5101351 5023340 5023435 5025150 5025158 5025332 5025405 5025406 5043607 5044673 5044913 5045022 5045023 5047027 5047142 5100529 3 1 2 2 3 1 1 2 1 3 3 3 1 1 1 1 1 1 2 1 21 22 23 24 25 26 27 28 29 30 31 32 5025017X22 5025017X28 5025017X36 5045106A 5402555D 5023175 5023297 5025396 5025127 5025011X10 5025017X24 5101103 1 1 1 1 1 3 1 2 2 1 1 1 DESCRIPTION KEY, 1/4 SQ. X 1-1/4 GREASE FITTING, 1/4-28 STRAIGHT BUSHING, FLANGE KIT, PULLEY & SHIELD (Includes Part Nos 5021976 & 5101103) PULLEY, 5.926 OVER BALL (52" MODELS ONLY) SPRING, EXTENSION, SWIVEL END BELT, # 7-8673, 1500Z, 160.6EL, 52" DECK (52" MODELS ONLY) WASHER, 1/2 USS WASHER, 1/2 SAE NUT, 1/2-13 HEX SIDE LOCK NUT, 3/4-16 HEX WASHER, 3/4 BELLEVILLE SPACER, .50 X 1.00 X 2.00 SPACER, .52 X 1.00 X .88 WASHER, .53 X 1.50 X .25 SPACER, .52 X 1.00 X 3.50 SPACER, .52 X 1.00 X .44 SPACER, .51 X .75 X .56 SPACER, .52 X 1.25 X .70 PULLEY, IDLER, 6.75 OD X 1.62 FACE (Make sure you have bolt # 5025017X28 & spacer 5044673) BOLT, 1/2-13 X 2-3/4 GD5 BOLT, 1/2-13 X 3-1/2 GD5 BOLT, 1/2-13 X 4-1/2 GD5 WELD, IDLER ARM - BLK - 5401621A (SV) PLATE, SPRING ANCHOR - RED PULLEY, 5.72., 48 DECK (48" MODELS ONLY) BELT, # 7-8671, 147.4 (48" MODELS ONLY) NUT, 1/2-13 HEX NYLOCK FLANGE NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) BOLT, 5/16-18 X 1-1/4 GD5 YZ BOLT, 1/2-13 X 3" SHIELD, PULLEY BEARING n PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 N o R tf ep o r ro du ct io REF NO. Footnotes The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 5900909 55 TP 400-7439-P-M1-SP 52" Mower Deck - Housing, Covers, Spindles & Blades (Export Models) N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 5900909 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 56 TP 400-7439-P-M1-SP 52" Mower Deck - Housing, Covers, Spindles & Blades (Export Models) PART NO. QTY. 5101756S 5022308 5023156 5025045 5025155 5025477 5025392 5025394 5023489 5061300 5061095 5101004 5402403 5025145X6 5025320X14 5405037D 5061811D 5061293D 5402360A 5405557A 5600382 5025013X10 5025011X6 5404699D 5025156 5102015 5405238A 5025011X8 5600131 5025498 5061598 5023385 5025164 5406204D 5406205D 5025155 5025011X8 5025392 3 6 12 2 14 3 21 7 1 1 3 1 1 2 3 1 1 1 1 1 1 6 6 1 4 1 1 6 1 2 1 1 1 1 1 8 8 8 DESCRIPTION BLADE, 18 X .25 X 2.5, 1 X 3.5 (SET OF 3) BODY CLIP, 5/16-18-7GA MATERIAL BOLT, 5/16-18 X 1 1/4 FLANGE NUT, 5/16-24 HEX NYLON LOCK WASHER, 5/16 SAE WASHER, 5/8 GRADE 8, YZ NUT, 5/16-18 HEX NYLOCK FLANGE NUT, 3/8-16 HEX NYLOCK FLANGE CAP, PROTECTOR, .120 ID ROD MOUNT, CHUTE 61" ASSM, SPINDLE, LOW PROFILE SAFETY WALK, 4.00 X 7.50 CHUTE, DISCHARGE, RUBBER, 61/72 BOLT, 5/16-18 X 3/4, CARRIAGE BOLT, 5/8-11 X 1-3/4 GD8 GUARD, 52 DECK, RH - RED GUARD, 52" DECK - LH - RED WELD, FRAME, CHUTE, 61 - SNP RED SUPPORT, DISCHARGE CHUTE - BLK PLATE, DEFLECTOR - BLK (52" Models) DECK SHELL W/ DECALS, 52, S150XCE BOLT, 3/8-16 X 1-1/4 GD5 BOLT, 5/16-18 X 3/4 GD5 WELD,BRACKET, ANTI SCALP - RED WASHER, 3/8 SAE FLAP, STRIPER, 52 DECK PLATE, SUPPORT - BLK BOLT, 5/16-18 X 1 GD5 YZ KIT, DISCHARGE CHUTE (INCLUDES REF NOS 8, 13, 18, 19, 22, 25) 5/16 PUSH-ON NUT RETAINER, STL, CZ SPACER, TORSION SPRING,9.63 LG SPRING, TORSION WASHER, 5/16 FENDER BAFFLE, FRONT DISCHARGE, LH,S150XCE, RED BAFFLE, FRONT DISCHARGE, RH,S150XCE, RED WASHER, 5/16 SAE BOLT, 5/16-18 X 1 GD5 YZ NUT, 5/16-18 HEX NYLOCK FLANGE n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 N o R tf ep o r ro du ct io REF NO. Footnotes The above parts group applies to the following Mfg. Nos.: 5900909 © Copyright 2012 Briggs and Stratton. All Rights Reserved. 57 TP 400-7439-P-M1-SP Electrical Schematic - Charging Circuit N o R tf ep o r ro du ct io n 331eswc0 The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright #NameBriggs and Stratton. All Rights Reserved. 5900909 58 TP 400-7439-P-M1-SP Electrical Schematic - Cranking Circuit N o R tf ep o r ro du ct io n 331eswr0 The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright #NameBriggs and Stratton. All Rights Reserved. 5900909 59 TP 400-7439-P-M1-SP Electrical Schematic - Ignition Grounding Circuit / Operator Presence N o R tf ep o r ro du ct io n 331eswi0 The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright #NameBriggs and Stratton. All Rights Reserved. 5900909 60 TP 400-7439-P-M1-SP Electrical Schematic - PTO Circuit N o R tf ep o r ro du ct io n 331eswp0 The above parts group applies to the following Mfg. Nos.: 5900885 5900843 5900844 5900845 5900907 5900884 © Copyright #NameBriggs and Stratton. All Rights Reserved. 5900909 61 TP 400-7439-P-M1-SP n N o R tf ep o r ro du ct io Hardware Identification & Torque Specifications Common Hardware Types Torque Specification Chart Hex Head Capscrew FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Washer Hardware Grade Lockwasher Carriage Bolt No Marks SAE Grade 2 Size Of Hardware Standard Hardware Sizing 8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 9/16-12 9/16-18 5/8-11 5/8-18 3/4-10 3/4-16 7/8-9 7/8-14 1-8 1-12 When a washer or nut is identified as 1/2”, this is the Nominal size, meaning the inside diameter is 1/2 inch; if a second number is present it represent the threads per inch When bolt or capscrew is identified as 1/2 - 16 x 2”, this means the Nominal size, or body diameter is 1/2 inch; the second number represents the threads per inch (16 in this example, and the final number is the body length of the bolt or screw (in this example 2 inches long). 19 20 27 31 66 76 11 12 20 23 30 35 50 55 65 75 90 100 160 180 140 155 220 240 in/lbs ft/lbs Nm. 2.1 2.3 3.1 3.5 7.6 8.6 15.0 16.3 27.2 31.3 40.8 47.6 68.0 74.8 88.4 102.0 122.4 136 217.6 244.8 190.4 210.8 299.2 326.4 0 N o R tf ep o r ro du ct io The guides and ruler furnished below are designed to help you select the appropriate hardware and tools. in/lbs ft/lbs SAE Grade 5 1/4 Nut, 1/2” 1/2 Inside Diameter 3/4 1 1/4 1/2 3/4 Screw, 1/2 x 2 2 1/4 Body Diameter 30 31 43 49 8 10 17 19 30 35 50 55 75 90 110 120 150 180 260 300 400 440 580 640 n Hex Nut SAE Grade 8 Nm. in/lbs ft/lbs Nm. 3.4 3.5 4.9 5.5 10.9 13.6 23.1 25.8 40.8 47.6 68.0 74.8 102.0 122.4 149.6 163.2 204.0 244.8 353.6 408.0 544.0 598.4 788.8 870.4 41 43 60 68 12 14 25 27 45 50 70 80 110 120 150 170 220 240 386 420 600 660 900 1,000 4.6 4.9 6.8 7.7 16.3 19.0 34.0 34.0 61.2 68.0 95.2 108.8 149.6 163.2 204.0 231.2 299.2 326.4 525.0 571.2 816.0 897.6 1,244.0 1,360.0 NOTES 1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques. b. for flange whizlock nuts and screws - use 135% of grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque values must meet this specification. 1/2 Body Length 3/4 3 1/4 1/2 3/4 4 Wrench & Fastener Size Guide 1/4 5/16 3/8 1/4” Bolt or Nut Wrench—7/16” 5/16” Bolt or Nut Wrench—1/2” 3/8” Bolt or Nut Wrench—9/16” 7/16 DIA. 7/16” Bolt or Nut Wrench (Bolt)—5/8” Wrench (Nut)—11/16” 1/2 DIA. 1/2” Bolt or Nut Wrench—3/4” Parts Manual S150X Series N o R tf ep o r ro du ct io n Zero-Turn Riding Mower IT IS THE POLICY OF BRIGGS STRATTON TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED Briggs and Stratton Power Products Group, LLC. 5375 North Main Street Munnsville, NY 13409 USA 800-933-6175 www.snapperpro.com © Copyright 2012 Briggs and Stratton Corporation All Rights Reserved. Printed In USA.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Annotate, Fill forms, Extract, Print high-res Author : 200435 Create Date : 2012:04:23 11:08:24-04:00 Modify Date : 2012:04:23 11:11:47-04:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2012:04:23 11:11:47-04:00 Format : application/pdf Title : PartsManual Creator : 200435 Producer : Acrobat Distiller 9.3.2 (Windows) Document ID : uuid:be46ac38-485c-4c82-af85-822422f9432e Instance ID : uuid:3e8be803-f8eb-4f00-b40f-6f9b875eaca0 Page Layout : TwoColumnRight Page Mode : UseThumbs Page Count : 64EXIF Metadata provided by EXIF.tools