PartsManual IS2000Z Khjp EHPa R ZVj5K1w

User Manual: IS2000Z

Open the PDF directly: View PDF PDF.
Page Count: 116

DownloadPartsManual IS2000Z Khjp EHPa R ZVj5K1w
Open PDF In BrowserView PDF
Parts
Manual
IS2000Z Series

N
o
R tf
ep o
r
ro
du
ct
io

n

Zero-Turn Riding Mower

Models:

Description:

5900810

26HP Kawasaki Liquid Cooled w/ 61" Mower Deck & ROPS (IS2000ZKAV2661)

5900811

30HP Briggs & Stratton w/ 61" Mower Deck & ROPS (IS2000ZB3061)

5900814

30HP Briggs & Stratton w/ 61" Mower Deck (IS2000ZBV30/61 AUS/NZ)

5900816

30HP Briggs & Stratton w/ 61" Mower Deck & ROPS (IS2000ZB3061 CAL)

5900968

30HP Briggs & Stratton w/ 61" Mower Deck & ROPS (IS2000ZB3061)

5900980

30HP Briggs & Stratton w/ 61" Mower Deck & ROPS ANSI-EXP (IS2000ZB3061 ANSI EXP)

5900879

26HP Kawasaki w/ 61" Mower Deck & ROPS (IS2000ZKAV2661)

5900939

26HP Kawasaki w/ 52" Mower Deck & ROPS ANSI-EXP (IS2000ZKAV2652 ANSI EXP)

5900945

26HP Kawasaki w/ 52" Mower Deck & ROPS (IS2000ZKAV2652)

5900807

34HP Kawasaki w/ 61" Mower Deck & ROPS (IS2000ZKAV3461SS)

5900838

27HP Kohler w/ 52" Mower Deck & ROPS (IS2000ZK2752)

5900840

25HP Kawasaki w/ 52" Mower Deck & ROPS (IS2000ZKAV2552)

5900839

25HP Kawasaki w/ 52" Mower Deck & ROPS (IS2000ZKAV25/52 AUS/NZ)

5900809

25HP Kawasaki w/ 61" Mower Deck & ROPS (IS2000ZKAV2561)

5900815

25HP Kawasaki w/ 61" Mower Deck & ROPS (IS2000ZKAV2561 CAL)

5900808

27HP Kawasaki w/ 61" Mower Deck & ROPS (IS2000ZKAV2761)

Briggs and Stratton Power Products Group, LLC.
5375 North Main Street
Munnsville, NY 13409 USA
800-933-6175

5101930

Revision AC
Rev. Date: 11/01/11
TP 400-7423-AC-2Z-F

n

N
o
R tf
ep o
r
ro
du
ct
io

Table Of Contents
MODEL COMPONENTS

PAGE

N
o
R tf
ep o
r
ro
du
ct
io

n

Main Frame & Front Suspension Group .............................................................................................................................
4
Rear Bumper, Roll Bar & Seat Belt Group .........................................................................................................................
6
Seat, Mount & Floor Group ................................................................................................................................................
8
Fuel Supply Hose & Tank Replacement Parts Group ........................................................................................................
10
Fuel Tank & Mount Group ..................................................................................................................................................
12
Instrument Control Panel Group - Liquid Cooled Models ...................................................................................................
14
Instrument Control Panel Group - Air Cooled Models ........................................................................................................
16
Engine & PTO Group - 30HP Briggs & Stratton .................................................................................................................
18
Engine & PTO Group - 27HP Kawasaki .............................................................................................................................
20
Engine & PTO Group - 34HP Kawasaki .............................................................................................................................
24
Engine & PTO Group - 27HP Kohler ..................................................................................................................................
28
Engine & PTO Group - 25HP Kawasaki .............................................................................................................................
30
Engine & PTO Group - 26HP Kawasaki Liquid Cooled ......................................................................................................
34
Engine & PTO Group - 26HP Kawasaki Air Cooled ...........................................................................................................
38
Pump Drive Group .............................................................................................................................................................
42
Motion Control Group .........................................................................................................................................................
44
Hydraulic Group .................................................................................................................................................................
48
Hydraulic Mount Group ......................................................................................................................................................
52
Hydraulic Group - 25HP Kawasaki & 27HP Kohler Models (S/N: 2014337845 & Below) ..................................................
54
Parking Brake Group ..........................................................................................................................................................
56
Rear Suspension Group .....................................................................................................................................................
58
Deck Lift Group - All 52" Models & 61" Models S/N: 2014341047 & Below .......................................................................
60
Deck Lift Group - 61" Models S/N: 2014341048 & Above ..................................................................................................
64
Wheel & Tire Group ...........................................................................................................................................................
68
Decals - Safety & Operation ...............................................................................................................................................
70
Decals - Safety & Operation (Export Models) ....................................................................................................................
72
Decals - Brand & Model .....................................................................................................................................................
74
Evap Canister Group ..........................................................................................................................................................
76
52" & 61" Mower Deck - Hanger Chains ............................................................................................................................
78
61" Mower Deck Group - Housing, Covers, Spindles & Blades .........................................................................................
80
61" Mower Deck - Pulleys, Belts & Idler Arm .....................................................................................................................
82
52" & 61" Mower Deck - Rollers & Casters ........................................................................................................................
84
52" Mower Deck - Housing, Covers, Spindles & Blades ....................................................................................................
86
52" Mower Deck - Pulleys, Belts & Idler Arm .....................................................................................................................
88
Spindle Service Parts (5061095) ........................................................................................................................................
90
Spindle Service Parts (5100993) ........................................................................................................................................
92
Electrical Schematics - 26HP Kawasaki LC ....................................................................................................................... 94-97
Electrical Schematics - 30HP Briggs & Stratton ................................................................................................................. 98-101
Electrical Schematics - Kawasaki .......................................................................................................................................102-105
Electrical Schematics - 25HP Kawasaki .............................................................................................................................106-109
Electrical Schematics - 27HP Kohler ..................................................................................................................................110-113

Torque Specification Chart ............................................................................................. Inside Back Cover

Main Frame & Front Suspension Group

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900809 (IS2000ZKAV2561)
5900817 (IS2000ZK2761)
5900980 (IS2000ZB3061 ANSI EXP)
5900815 (IS2000ZKAV2561 CAL)
5900945 (IS2000ZKAV2652)

5900879 (IS2000ZKAV2661)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900810 (IS2000ZKAV2661)
5900838 (IS2000ZK2752)
5900840 (IS2000ZKAV2552)
5900807 (IS2000ZKAV3461SS)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

4

5900814 (IS2000ZBV30/61 AUS/NZ)
5900968 (IS2000ZB3061)
5900816 (IS2000ZB3061 CAL)
5900808 (IS2000ZKAV2761)
5900811 (IS2000ZB3061)
5900813 (IS2000ZKAV25/61 AUS/NZ)

TP 400-7423-AC-2Z-F

Main Frame & Front Suspension Group
QTY.

5020095
5402208B
5023356
5402215B
5020883
5402214B
5407041B
5404097B
5025093
5046093
5022039
5047461
5025265X28
5025284
5025156
5025013X16
5025013X18
5025394
5023436
5025265X24
5046011
5021072
5020884
5025160
5100882
5025448
5025449
5020020
5025457
1722009

2
2
4
1
4
1
1
1
4
2
4
4
2
4
4
2
2
4
2
2
2
2
4
4
2
2
4
2
2
1

DESCRIPTION
GREASE FITTING, 1/4-28 STRAIGHT
WELD, CASTER YOKE - RED
BUSHING, 1.00X1.13X.75, PLA (Qty: 2 per suspension arm)
WELD, FRONT A-ARM - RH -RED
BEARING CUP
WELD, FRONT A-ARM - LH -RED
WELD, MAIN FRAME, IS2000/COBALT - RED (S/N: 2014341048 & Above)
WELD, MAIN FRAME, IS2000/COBALT - RED (S/N: 2014341047 & Below)
NUT, HEX JAM, 3/4-16
SPACER, .75 X 1.50 X 1.00
BALL JOINT, 3/4-16 MALE
SPACER, .76 X 1.00 X .25
BOLT, 3/4-16 X 3-1/2" YZ GD5
NUT, 3/4-16 HEX NYLON LOCK
WASHER 3/8" SAE
BOLT, 3/8-16 X 2" GD5 YZ
BOLT, 3/8-16 X 2-1/4" GD5 YZ
NUT, 3/8-16 HEX NYLOCK FLANGE
SHOCK ABSORBER
BOLT, 3/4-16 X 3" YZ GD5
SPACER, .76 X 1.00 X .50
SEAL, GREASE
BEARING, TAPPERD ROLLER, 1"
WASHER, 3/4" SAE
CAP, CASTER SPINDLE, LOW PROFILE
NUT, 3/4-16, HEX JAM NYLON LOCK
BELLEVILLE WASHER, 1.500 X .755
GREASE FITTING, 1/4-28 45 DEGREE
BOLT, 1/4-28 X 1/2, GD5 YZ
STRAP-BLACK RUBB

n

PART NO.

1
2
3
4
5
6
7a
7b
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900809 (IS2000ZKAV2561)
5900817 (IS2000ZK2761)
5900980 (IS2000ZB3061 ANSI EXP)
5900815 (IS2000ZKAV2561 CAL)
5900945 (IS2000ZKAV2652)

5900879 (IS2000ZKAV2661)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900810 (IS2000ZKAV2661)
5900838 (IS2000ZK2752)
5900840 (IS2000ZKAV2552)
5900807 (IS2000ZKAV3461SS)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

5

5900814 (IS2000ZBV30/61 AUS/NZ)
5900968 (IS2000ZB3061)
5900816 (IS2000ZB3061 CAL)
5900808 (IS2000ZKAV2761)
5900811 (IS2000ZB3061)
5900813 (IS2000ZKAV25/61 AUS/NZ)

TP 400-7423-AC-2Z-F

Rear Bumper, Roll Bar & Seat Belt Group

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900817 (IS2000ZK2761)
5900840 (IS2000ZKAV2552)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900811 (IS2000ZB3061)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)

5900807 (IS2000ZKAV3461SS)
5900968 (IS2000ZB3061)
5900980 (IS2000ZB3061 ANSI EXP)
5900808 (IS2000ZKAV2761)
5900879 (IS2000ZKAV2661)
5900816 (IS2000ZB3061 CAL)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

6

5900813 (IS2000ZKAV25/61 AUS/NZ)
5900838 (IS2000ZK2752)
5900945 (IS2000ZKAV2652)
5900810 (IS2000ZKAV2661)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900809 (IS2000ZKAV2561)

TP 400-7423-AC-2Z-F

Rear Bumper, Roll Bar & Seat Belt Group
QTY.

5023484
5409141B
5025155
5025011X6
5025392
5025156
5025013X8
5025394
5400681B
5401953B
5409140B
5100079
5100377
5025158
5025017X26
5025396
5100190
5401044A
5100267
5101226
5100139
5100383
5100545
5101223

6
1
4
4
4
2
2
2
1
1
1
2
1
4
4
7
1
1
3
1
1
1
1
1
2
2
2
2
1

DESCRIPTION
PLUG, PANEL, 1.25 BLACK
PLATE, HEAT SHIELD
WASHER, 5/16" SAE
BOLT, 5/16-18 X 3/4" GRD5
NUT, 5/16-18 HEX NYLOCK FLANGE
WASHER, 3/8 SAE
BOLT, 3/8-16 X 1 GD5 YZ
NUT, 3/8-16 HEX NYLOCK FLANGE
PLATE, CARB PROTECTOR - RED
PLATE, CARB PROTECTOR - RED (Liquid Cooled Models)
WELD, BUMPER
PIN, HITCH, BLACK W/ PLASTIC LANYARD
ROLL BAR HARDWARE BAG (Includes hitch pin.)
WASHER, 1/2" SAE
BOLT, 1/2-13 X 3-1/4, HEX HD, GD5, YZ
NUT, 1/2-13 HEX NYLOCK FLANGE
ROPS COMPLETE IN BOX, IS2000
EXTENSION, SEAT BELT - BLK
SCREW, 1/2 - 13 X 1.00 SCHS
RETRACTOR, SEAT BELT (FOR SUSPENSION SEAT)
SEAT BELT, RETACTING - ASSM (FOR NON-SUSPENSION SEAT)
ROLL BAR TOP LOOP (See drawing note.)
ROLL BAR POST, RH (See drawing note.)
ROLL BAR POST, LH (See drawing note.)
RUBBER BUMPER
*BOLT
*NUT
RUBBER WASHER
SUPER SLEEVE BUCKLE, SEAT BELT (FOR SUSPENSION SEAT)

n

PART NO.

1
2
3
4
5
6
7
8
9a
9b
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes
(Not serviced. For replacement hardware, you must purchase complete Roll Bar kit.)
The above parts group applies to the following Mfg. Nos.:
5900817 (IS2000ZK2761)
5900840 (IS2000ZKAV2552)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900811 (IS2000ZB3061)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)

5900807 (IS2000ZKAV3461SS)
5900968 (IS2000ZB3061)
5900980 (IS2000ZB3061 ANSI EXP)
5900808 (IS2000ZKAV2761)
5900879 (IS2000ZKAV2661)
5900816 (IS2000ZB3061 CAL)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

7

5900813 (IS2000ZKAV25/61 AUS/NZ)
5900838 (IS2000ZK2752)
5900945 (IS2000ZKAV2652)
5900810 (IS2000ZKAV2661)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900809 (IS2000ZKAV2561)

TP 400-7423-AC-2Z-F

Seat, Mount & Floor Group

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900840 (IS2000ZKAV2552)
5900807 (IS2000ZKAV3461SS)
5900980 (IS2000ZB3061 ANSI EXP)
5900810 (IS2000ZKAV2661)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900879 (IS2000ZKAV2661)

5900945 (IS2000ZKAV2652)
5900811 (IS2000ZB3061)
5900816 (IS2000ZB3061 CAL)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900968 (IS2000ZB3061)
5900808 (IS2000ZKAV2761)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

8

5900838 (IS2000ZK2752)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900809 (IS2000ZKAV2561)
5900815 (IS2000ZKAV2561 CAL)
5900817 (IS2000ZK2761)
5900839 (IS2000ZKAV25/52 AUS/NZ)

TP 400-7423-AC-2Z-F

Seat, Mount & Floor Group
PART NO.

QTY.

5025155
5025011X8
5025392
5100643
5025154
5025010X10
5025391
5101013
5101011
5404137B
5022031
5103004
5600300
5022094
5025179X6
5025029
5025326
5025010X12
5046586
5025013X48
5100356
5025156
5401940B
5022612
5025127
5025013X44
5025394
5023358
5401162B
5025013X8
5100381
5025013X10
5100652
5102760X2
5102760X1
5102760X3
5102760X4
5101214
5101214X1
5101214X2
5101214X3
5101214X4

4
4
8
2
4
4
4
1
1
1
1
1
1
1
2
2
1
2
1
1
1
5
1
2
2
2
5
1
1
2
2
2
1
1
1
1
1
1
1
1
1
1

DESCRIPTION
WASHER, 5/16" SAE
BOLT, 5/16-18 X 1" GD5 YZ
NUT, 5/16-18 HEX NYLOCK FLANGE
BLOCK, DECK LIFT SUPPORT
WASHER, 1/4" SAE
BOLT, 1/4-20 X 1-1/4" GD5
NUT, 1/4-20 HEX NYLOCK FLANGE
SAFETY WALK, 11.50 X 15.00
SAFETY WALK, 8.00 X 15.00
PLATE, FLOOR, IS2000 - RED
SEAT, GRAY (S/N: 2014582798 & BELOW - 28HP MODELS & BELOW)
SEAT, LOW (S/N: 2014582799 & ABOVE - 28HP MODELS & BELOW)
SEAT PLATE W/ DECALS, IS2000Z (INCLUDES DECALS)
SWITCH PLUNGER N.C. / N.C.
SCREW, #10-24 X 1/2" RD PHILLIPS
NUT, #10-24 HEX
WASHER, .39 X 2.00 X X .14
BOLT, 1/4-20 X1 1/2"
SPACER, .38 X .50 X 5.06
BOLT, 3/8-16 X 6" GD5 YZ
SPRING, .688 ID X .130 WIRE DIA 4.25
WASHER 3/8" SAE
WELD, SEAT SUPPORT - RED
BUMPER, RUBBER 5/16-18
NUT, 5/16-18 HEX SM. SERR. FLG.
BOLT, 3/8-16 X 5-1/2" GD5 YZ
NUT, 3/8-16 HEX NYLOCK FLANGE
VALVE, FUEL, STR. OUTLET
MOUNT, FUEL SELECTOR SWITCH - RED
BOLT, 3/8-16 X 1" GD5 YZ
CLAMP, 1/2" HOSE, DOUBLE, PLASTIC
BOLT, 3/8-16 X 1-1/4" GD5 YZ
SPRING, EXTENSION, 4" (SV) (NON-SUSPENSION SEAT)
CUSHION, SEAT BOTTOM (SV) (NON-SUSPENSION SEAT)
CUSHION, SEAT BACK (SV) (NON-SUSPENSION SEAT)
ARM REST (SV) (NON-SUSPENSION SEAT)
SLIDE RAILS (SET OF TWO) (SV) (NON-SUSPENSION SEAT)
SEAT, SUSP TYPE (30HP MODELS & ABOVE)
KIT, ARM REST, SET OF TWO, S/S (SV) (SUSPENSION SEAT)
CUSHION, BACK, S/S (SV) (SUSPENSION SEAT)
CUSHION, SEAT, S/S (SV) (SUSPENSION SEAT)
KIT, ADJUSTER, S/S (SV) (SUSPENSION SEAT)

n

1
2
3
4
5
6
7
8
9
10
11b
11a
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900840 (IS2000ZKAV2552)
5900807 (IS2000ZKAV3461SS)
5900980 (IS2000ZB3061 ANSI EXP)
5900810 (IS2000ZKAV2661)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900879 (IS2000ZKAV2661)

5900945 (IS2000ZKAV2652)
5900811 (IS2000ZB3061)
5900816 (IS2000ZB3061 CAL)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900968 (IS2000ZB3061)
5900808 (IS2000ZKAV2761)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

9

5900838 (IS2000ZK2752)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900809 (IS2000ZKAV2561)
5900815 (IS2000ZKAV2561 CAL)
5900817 (IS2000ZK2761)
5900839 (IS2000ZKAV25/52 AUS/NZ)

TP 400-7423-AC-2Z-F

Fuel Supply Hose & Tank Replacement Parts Group

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900968 (IS2000ZB3061)
5900815 (IS2000ZKAV2561 CAL)
5900838 (IS2000ZK2752)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900817 (IS2000ZK2761)
5900839 (IS2000ZKAV25/52 AUS/NZ)

5900810 (IS2000ZKAV2661)
5900808 (IS2000ZKAV2761)
5900840 (IS2000ZKAV2552)
5900816 (IS2000ZB3061 CAL)
5900807 (IS2000ZKAV3461SS)
5900809 (IS2000ZKAV2561)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

5900811 (IS2000ZB3061)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900980 (IS2000ZB3061 ANSI EXP)
5900879 (IS2000ZKAV2661)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900945 (IS2000ZKAV2652)

10

TP 400-7423-AC-2Z-F

Fuel Supply Hose & Tank Replacement Parts Group
PART NO.

QTY.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

5023358
5020835
5050831X35
5050831X45
5050831X16
5050831X10
5600050
5101144
5300047
5050831X12
5021199
5050831X37
5022922
5021178X3

1
6
1
1
1
1
2
2
4
2
2
2
1
1
1
1
1

DESCRIPTION
VALVE, FUEL, STR. OUTLET
CLAMP, HOSE, EXTERNAL, 1/2 - RED
HOSE, 1/4" FUEL, 35.00"
HOSE, 1/4" FUEL, 45.00" (25 HP Kawasaki & 30HP Briggs & Stratton Models)
HOSE, 1/4" FUEL, 16.00" (27 HP Kohler Models)
HOSE, 1/4" FUEL, 10.00"
SEE REF # 10
KIT, BUSHING, FUEL
SEE REF # 10
HOSE ASSEMBLY
SEE REF # 10
ASSM, FUEL HOSE, 26" (Includes clamps & filter)
HOSE, 1/4" FUEL, 12.00 (26 HP Kawasaki Liquid Cooled Models)
CABLE TIE-PUSH MOUNT (25 HP Kawasaki & 30 HP Briggs & Stratton Models)
HOSE, 1/4" FUEL, 37.00" (26HP Kawasaki Air Cooled Models)
CLAMP, #4 HOSE, STAINLESS (26HP Kawasaki Models)
FUEL FILTER (SV)

N
o
R tf
ep o
r
ro
du
ct
io

n

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900968 (IS2000ZB3061)
5900815 (IS2000ZKAV2561 CAL)
5900838 (IS2000ZK2752)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900817 (IS2000ZK2761)
5900839 (IS2000ZKAV25/52 AUS/NZ)

5900810 (IS2000ZKAV2661)
5900808 (IS2000ZKAV2761)
5900840 (IS2000ZKAV2552)
5900816 (IS2000ZB3061 CAL)
5900807 (IS2000ZKAV3461SS)
5900809 (IS2000ZKAV2561)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

5900811 (IS2000ZB3061)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900980 (IS2000ZB3061 ANSI EXP)
5900879 (IS2000ZKAV2661)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900945 (IS2000ZKAV2652)

11

TP 400-7423-AC-2Z-F

Fuel Tank & Mount Group

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900840 (IS2000ZKAV2552)
5900816 (IS2000ZB3061 CAL)
5900838 (IS2000ZK2752)
5900980 (IS2000ZB3061 ANSI EXP)
5900817 (IS2000ZK2761)
5900879 (IS2000ZKAV2661)

5900807 (IS2000ZKAV3461SS)
5900968 (IS2000ZB3061)
5900945 (IS2000ZKAV2652)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900810 (IS2000ZKAV2661)
5900814 (IS2000ZBV30/61 AUS/NZ)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

12

5900808 (IS2000ZKAV2761)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900811 (IS2000ZB3061)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900815 (IS2000ZKAV2561 CAL)
5900809 (IS2000ZKAV2561)

TP 400-7423-AC-2Z-F

Fuel Tank & Mount Group
REF NO

PART NO.

QTY.

5022917x1
5022917
5025155
5025011X8
5025392
5103005
5101651
5401095B
5025386
5025170
5025011X6
5102975
5100176
5408898B
5408901B
5102974
5100175

2
2
12
8
8
2
2
2
8
8
8
1
1
1
1
1
1

DESCRIPTION
GROMMET, FUEL GUAGE
GAUGE, FUEL 12"
WASHER, 5/16" SAE
BOLT, 5/16-18 X 1" GD5 YZ
NUT, 5/16-18 HEX NYLOCK FLANGE
FUEL CAP, 3-1/2", MANAGED VENT OUT, 12" (S/N: 2014923026 & ABOVE)
CAP, FUEL TANK, 3-1/2" NECK (S/N: 2014923025 & BELOW)
BADGE, IS2000 - IS3000 - RED
SCREW, #10-24 X 3/8" ALLEN BHBZ
WASHER, 5/16" LOCK
BOLT, 5/16-18 X 3/4" GRD5
TANK, FUEL, IS2000 & IS3100 - LH (S/N: 2014923026 & ABOVE)
TANK, FUEL, IS2000 / 3000Z - LH (S/N: 2014923025 & BELOW)
WELD, TANK MOUNT - LH - RED
WELD, TANK MOUNT - RH - RED
TANK, FUEL, IS2000 & IS3100 - RH (S/N: 2014923026 & ABOVE)
TANK, FUEL IS2000 / 3000Z - RH (S/N: 2014923025 & BELOW)

N
o
R tf
ep o
r
ro
du
ct
io

n

1
2
3
4
5
6a
6b
7
8
9
10
11a
11b
12
13
14a
14b

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900840 (IS2000ZKAV2552)
5900816 (IS2000ZB3061 CAL)
5900838 (IS2000ZK2752)
5900980 (IS2000ZB3061 ANSI EXP)
5900817 (IS2000ZK2761)
5900879 (IS2000ZKAV2661)

5900807 (IS2000ZKAV3461SS)
5900968 (IS2000ZB3061)
5900945 (IS2000ZKAV2652)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900810 (IS2000ZKAV2661)
5900814 (IS2000ZBV30/61 AUS/NZ)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

13

5900808 (IS2000ZKAV2761)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900811 (IS2000ZB3061)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900815 (IS2000ZKAV2561 CAL)
5900809 (IS2000ZKAV2561)

TP 400-7423-AC-2Z-F

Instrument Control Panel Group - Liquid Cooled Models

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900810 (IS2000ZKAV2661)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

14

TP 400-7423-AC-2Z-F

Instrument Control Panel Group - Liquid Cooled Models
QTY.

5021603
5021518
5022805
5025299X4
5020927
5022180
5022222
5102417
5046501
5025271
5025179X6
5022269
1709188
5101073
5025035
5025270X16
5046360X1
5023393
5403401A
5101537

4
1
1
3
1
1
1
1
1
4
2
1
1
1
1
2
1
1
1
1

DESCRIPTION
FUSE, ATO 20 AMP
FUSE, BLOCK
COVER, VINYL FUSEBLOCK
SCREW, 1/4-20 X 1/2" ALLEN BH
SWITCH, IGNITION, 6 POST
SWITCH, BLADE ENGAGEMENT
RING, SWITCH RETAINER
HOUR METER
CABLE, CHOKE CONTROL, 47"
NUT, #10-24 HEN NYLON LOCK
SCREW, #10-24 X 3/4"
O-RING, 7/8" ID X 1/16"
PLUG, .820X1.44 HOLE, BLACK PLASTIC
CABLE, THROTTLE, 42"
NUT, 3/8 - 24 HEX
SCREW, #10-24 X 2" ROUND PHILLIPS
KNOB, THROTTLE CONTROL (SV)
GUAGE, WATER TEMPERATURE
PANEL, CONTROL, IS2000Z LC
LEVER, THROTTLE CONTROL, HEAVY DUTY

n

PART NO.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900810 (IS2000ZKAV2661)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

15

TP 400-7423-AC-2Z-F

Instrument Control Panel Group - Air Cooled Models

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900809 (IS2000ZKAV2561)
5900807 (IS2000ZKAV3461SS)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)
5900811 (IS2000ZB3061)

5900808 (IS2000ZKAV2761)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900838 (IS2000ZK2752)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900816 (IS2000ZB3061 CAL)
5900968 (IS2000ZB3061)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

16

5900840 (IS2000ZKAV2552)
5900945 (IS2000ZKAV2652)
5900879 (IS2000ZKAV2661)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900817 (IS2000ZK2761)

TP 400-7423-AC-2Z-F

Instrument Control Panel Group - Air Cooled Models
QTY.

5021603
5021518
5022805
5025299X4
5020927
5022180
5022222
5102417
5046501
5025271
5025179X6
5403400A
1709188
5101076
5025035
5025270X16
5025271
5061533
5101072
5022269
5047779

4
1
1
3
1
1
1
1
1
2
2
1
1
1
1
2
2
1
1
1
1

22
23

5101537
5101073

1
1

24
25

5046360X1
5061763

1
2

DESCRIPTION
FUSE, ATO 20 AMP
FUSE, BLOCK
COVER, VINYL FUSEBLOCK
SCREW, 1/4-20 X 1/2" ALLEN BH
SWITCH, IGNITION, 6 POST
SWITCH, BLADE ENGAGEMENT
RING, SWITCH RETAINER
HOUR METER
CABLE, CHOKE CONTROL, 47" (25HP & 27HP Kawasaki Models)
NUT, #10-24 HEN NYLON LOCK
SCREW, #10-24 X 3/4"
PANEL, CONTROL, IS2000Z
PLUG, .820X1.44 HOLE, BLACK PLASTIC
CABLE, THROTTLE, 47" (27HP Kohler Models)
NUT, 3/8 - 24 HEX
SCREW, #10-24 X 2" ROUND PHILLIPS
NUT, #10-24 HEX NYLON LOCK
CABLE, CHOKE CONTROL, 60" (SHORT BODY) (27HP Kohler Models)
CABLE, THROTTLE, 52" (34HP Kawasaki Models)
O-RING, 7/8" ID X 1/16"
CABLE, CHOKE CONTROL, 51" (Z) (30HP Briggs & Stratton & 34HP Kawasaki
Models)
LEVER, THROTTLE CONTROL, HEAVY DUTY
CABLE, THROTTLE, 42" (25HP & 27HP Kawasaki & 30HP Briggs & Stratton
Models)
KNOB, THROTTLE CONTROL (SV)
SPACER, .20 X .38 X 1.25

n

PART NO.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900809 (IS2000ZKAV2561)
5900807 (IS2000ZKAV3461SS)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)
5900811 (IS2000ZB3061)

5900808 (IS2000ZKAV2761)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900838 (IS2000ZK2752)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900816 (IS2000ZB3061 CAL)
5900968 (IS2000ZB3061)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

17

5900840 (IS2000ZKAV2552)
5900945 (IS2000ZKAV2652)
5900879 (IS2000ZKAV2661)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900817 (IS2000ZK2761)

TP 400-7423-AC-2Z-F

Engine & PTO Group - 30HP Briggs & Stratton

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900816 (IS2000ZB3061 CAL)
5900980 (IS2000ZB3061 ANSI EXP)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900968 (IS2000ZB3061)
5900811 (IS2000ZB3061)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

18

TP 400-7423-AC-2Z-F

Engine & PTO Group - 30HP Briggs & Stratton
QTY.

* -5025011X14
5046416A
5025139
5043636
5025165
5025392
5025155
5102864
5100366
5100875
5025188
5044062
5100874
5050407X8
5101554
5025394
5025055X18
5101492
5025531
5021500
5048681
5025394
842859
5025470
842921
5025391
843906X1
5025011X8
5025010X8
841238
5021379
809907
809218
841237

1
4
1
1
1
4
6
2
1
1
1
4
1
1
1
1
2
1
1
1
1
1
2
1
1
1
1
1
2
1
1
1
1
1
1

DESCRIPTION
* ENGINE, 30HP B&S, VERTICAL SHAFT
BOLT, 5/16-18 X 1-3/4" GD5 YZ
ANCHOR, CLUTCH - BLK
NUT, 5/16-18 HEX SERRATED FLANGE, LARGE
CLUTCH ANCHOR PAD
WASHER-3/8 FENDER
NUT, 5/16-18 HEX NYLOCK FLANGE
WASHER, 5/16" SAE
BOLT, CRANKSHAFT, 7/16" X 2-1/2
METRIC ADAPTER, M14-1.5" TO 3/8 NPTF
CLUTCH, WARNER,# 5218-158
WASHER, 5/16" INT. TOOTH LOCK
SPACER, 1.13 X 1.75 X .50
PULLEY, 5.25 OD X 1.126 ID
KEY, 1/4" SQ. X 1.00
SPACER, 1.13 X 1.75 X 1.090, BLACK ZINC
NUT, 3/8-16 HEX NYLOCK FLANGE
BOLT, 5/16-18 X 2-1/4 GD5 TFL, ZN
TIE WRAP, 24" LONG (Not Shown)
SET SCREW, 5/16-18 X 3/8, KNURL, W/PATCH
CLAMP, VINYL
HOSE, OIL DRAIN
NUT, 3/8-16 HEX NYLOCK FLANGE
SCREEN, ARRESTER (Not shown)
SCREW, SELF-TAP,#8-32 X 3/8,WASH HEX, CZ (Not shown)
FILTER, OIL, BRIGGS & STRATTON (Not shown)
NUT, 1/4-20 HEX NYLOCK FLANGE
MUFFLER, EXHAUST ASSY
BOLT, 5/16-16 X 1" GD5 YZ
BOLT, 1/4-20 X 1", GD5 (Not shown)
ELEMENT, AIR CLEANER, SECONDARY (Not shown)
GROMMET, 7/8" (Not shown)
CAP, A/C RAIN (Not shown)
AIR CLEANER ASSEMBLY, COMPLETE (Not shown)
ELEMENT, AIR CLEANER, PRIMARY (Not shown)

n

PART NO.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes
* For engine replacement parts see you local Briggs & Stratton dealer
The above parts group applies to the following Mfg. Nos.:
5900816 (IS2000ZB3061 CAL)
5900980 (IS2000ZB3061 ANSI EXP)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900968 (IS2000ZB3061)
5900811 (IS2000ZB3061)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

19

TP 400-7423-AC-2Z-F

Engine & PTO Group - 27HP Kawasaki

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900808 (IS2000ZKAV2761)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

20

TP 400-7423-AC-2Z-F

Engine & PTO Group - 27HP Kawasaki
PART NO.

QTY.

5047075
5047033
5022234
5100084
5100456
5021334X1
5101124
5025392
5046416A
5043636
5044617
5046446
5025155
5025011X8
5025532
5025011X14
5050407X8
5102864
5025139
5025055X18
5021379
5048681
5102126X7
5101538
5023146
5101539
5102126X1
5101540
5102126X8
5101541
5102126X4
5101542
5102126X3
5101543
5101547
5102126X2
5101544
5102126X5
5101545
5102126X6

1
1
1
1
1
1
1
9
1
1
4
2
4
4
3
2
1
1
1
1
1
1
1
1
1
3
3
1
1
1
1
1
1
1
1
2
1
1
1
1
1

DESCRIPTION
PULLEY, CRANKSHAFT (DOUBLE A)
SPACER, 1.13 X 1.75 X 1.03
ADAPTER, OIL DRAIN
CLUTCH,5218-134, WARNER
SPACER, 1.13 X 1.75 X .38
OIL FILTER (49065-2078)
MUFFLER, 27 HP KAWASAKI
NUT, 5/16-18 HEX NYLOCK FLANGE
ANCHOR, CLUTCH - BLK
CLUTCH ANCHOR PAD
WASHER, .34 X 1.25 X 10 GA
SPACER, .39 X 1.00 X .80
WASHER, 5/16 SAE
BOLT, 5/16-18 X 1 GD5 YZ
BOLT, HEX FLG, SER GD5 3/8-16 X 1-1/4, PATCH
BOLT, 5/16-18 X 1-3/4 GD5 YZ
KEY, 1/4 SQ. X 1.00
BOLT, CRANKSHAFT, 7/16"X2-1/2
ENGINE, 27HP, KAWASAKI (Includes Ref Nos. 24 - 35)
NUT, 5/16-18 HEX SERRATED FLANGE (LARGE)
BOLT, 5/16-18 X 2-1/4 TFL, GD5 YZ
GROMMET, 7/8
HOSE, OIL DRAIN
RAIN COVER (SV) (S/N: 2013946880 & Above)
RAIN COVER (SV) (S/N: 2013946879 & Below)
CLAMP (SV) (S/N: 2013946880 & Above)
CLAMP (SV) (S/N: 2013946879 & Below)
AIR FILTER ASSEMBLY (SV) (S/N: 2013946880 & Above)
AIR FILTER ASSEMBLY (SV) (S/N: 2013946879 & Below)
RUBBER, Dust Valve (SV) (S/N: 2013946880 & Above)
RUBBER, Dust Valve (SV) (S/N: 2013946879 & Below)
AIR FILTER, SECONDARY (SV) (S/N: 2013946880 & Above)
AIR FILTER, SECONDARY (SV) (S/N: 2013946879 & Below)
AIR FILTER, PRIMARY (SV) (S/N: 2013946880 & Above)
AIR FILTER, PRIMARY (SV) (S/N: 2013946879 & Below)
BRACKET PLATE, SUPPORT (SV)
CAP END, FILTER CASE (SV) (S/N: 2013946880 & Above)
CAP END, FILTER CASE (SV) (S/N: 2013946879 & Below)
CASE BRACKET (SV) (S/N: 2013946880 & Above)
BRACKET PLATE, UPPER (SV) (S/N: 2013946879 & Below)
CASE BRACKET (SV) (S/N: 2013946880 & Above)

n

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24a
24b
25a
25b
26a
26b
27a
27b
28a
28b
29a
29b
30
31a
31b
32a
32b
33a

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900808 (IS2000ZKAV2761)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

21

TP 400-7423-AC-2Z-F

Engine & PTO Group - 27HP Kawasaki

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900808 (IS2000ZKAV2761)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

22

TP 400-7423-AC-2Z-F

Engine & PTO Group - 27HP Kawasaki
REF NO

PART NO.

QTY.

5101546
5102126X9
5101548
5102126X10
5101549
5021500
5025010X6
1724815
5025126
5023217
5023216
5101492
5025154
5100969
5025470
5101641
5025531

1
1
1
1
1
1
3
1
3
2
2
1
1
1
2
1
1

DESCRIPTION
BRACKET PLATE, LOWER (SV) (S/N: 2013946879 & Below)
AIR INLET TUBE (SV) (S/N: 2013946880 & Above)
AIR INLET TUBE (SV) (S/N: 2013946879 & Below)
BREATHER TUBE (SV) (S/N: 2013946880 & Above)
BREATHER TUBE (SV) (S/N: 2013946879 & Below)
CLAMP, VINYL INSULATED
BOLT, 1/4-20 X 3/4 GD5 YZ
SOLENOID-4 POLE 12 VOLT DC (TROMBETTA)
NUT, 1/4-20 HEX SERRATED FLANGE
WASHER, Light Lock, 5/16
NUT, Hex Jam, 5/16-24
TIE WRAP, 24" LONG (Not Shown)
WASHER, 1/4 SAE
EXTENSION, TAILPIPE, 3"
SCREW,SELF-TAP,#8-32 X 3/8,WASH HEX, CZ
SCREEN, SPARK ARRESTER (Not Shown)
SET SCREW, 5/16-18 X 3/8, KNURL, W/PATCH

N
o
R tf
ep o
r
ro
du
ct
io

n

33b
34a
34b
35a
35b
36
37
38
39
40
41
42
43
44
45
46
47

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900808 (IS2000ZKAV2761)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

23

TP 400-7423-AC-2Z-F

Engine & PTO Group - 34HP Kawasaki

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900807 (IS2000ZKAV3461SS)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

24

TP 400-7423-AC-2Z-F

Engine & PTO Group - 34HP Kawasaki
PART NO.

QTY.

5047075
5047033
5022234
5100084
5100456
5021334X1
5101336
5025392
5046416A
5043636
5044617
5046446
5025155
5025011X8
5025532
5025011X14
5050407X8
5045289
5025139
5025055X18
5021379
5048681
5025100
5023146
5101539
5102126X1
5101540
5102126X8
5101541
5102126X4
5101542
5102126X3
5101543
5102126X7
5101538
5102126X2
5101544
5102126X5
5101545
5102126X6

1
1
1
1
1
1
1
9
1
1
4
2
4
4
3
2
1
1
1
1
1
1
1
1
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

DESCRIPTION
PULLEY, CRANKSHAFT (DOUBLE A)
SPACER, 1.13 X 1.75 X 1.03
ADAPTER, OIL DRAIN
CLUTCH,5218-134, WARNER
SPACER, 1.13 X 1.75 X .38
OIL FILTER (49065-2078)
MUFFLER, 34 HP KAWASAKI
NUT, 5/16-18 HEX NYLOCK FLANGE
ANCHOR, CLUTCH - BLK
CLUTCH ANCHOR PAD
WASHER, .34 X 1.25 X 10 GA
SPACER, .39 X 1.00 X .80
WASHER, 5/16 SAE
BOLT, 5/16-18 X 1 GD5 YZ
BOLT, HEX FLG, SER GD5 3/8-16 X 1-1/4, PATCH
BOLT, 5/16-18 X 1-3/4 GD5 YZ
KEY, 1/4 SQ. X 1.00
BOLT, CRANKSHAFT, 7/16"X2-1/2
ENGINE, 34HP, KAWASAKI (Includes Ref Nos. 25 - 35)
NUT, 5/16-18 HEX SERRATED FLANGE (LARGE)
BOLT, 5/16-18 X 2-1/4 TFL, GD5 YZ
GROMMET, 7/8
HOSE, OIL DRAIN
NUT, 3/8-16 HEX SIDE LOCK
CLAMP (SV) (S/N: & 2014450902 Above)
CLAMP (SV) (S/N: & 2014450901 Below)
AIR FILTER ASSEMBLY (SV) (S/N: & 2014450902 Above)
AIR FILTER ASSEMBLY (SV) (S/N: & 2014450901 Below)
RUBBER, Dust Valve (SV) (S/N: & 2014450902 Above)
RUBBER, Dust Valve (SV) (S/N: & 2014450901 Below)
AIR FILTER, SECONDARY (SV) (S/N: & 2014450902 Above)
AIR FILTER, SECONDARY (SV) (S/N: & 2014450901 Below)
AIR FILTER, PRIMARY (SV) (S/N: & 2014450902 Above)
AIR FILTER, PRIMARY (SV) (S/N: & 2014450901 Below)
RAIN COVER (SV) (S/N: & 2014450902 Above)
RAIN COVER (SV) (S/N: & 2014450901 Below)
FILTER CASE (SV) (S/N: & 2014450902 Above)
CAP END, FILTER CASE (SV) (S/N: & 2014450901 Below)
CASE BRACKET (SV) (S/N: & 2014450902 Above)
BRACKET PLATE, UPPER 27, 34 & 37 (SV) (S/N: & 2014450901 Below)
CASE BRACKET (SV) (S/N: & 2014450902 Above)

n

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25a
25b
26a
26b
27a
27b
28a
28b
29a
29b
30a
30b
31a
31b
32a
32b
33a

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900807 (IS2000ZKAV3461SS)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

25

TP 400-7423-AC-2Z-F

Engine & PTO Group - 34HP Kawasaki

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900807 (IS2000ZKAV3461SS)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

26

TP 400-7423-AC-2Z-F

Engine & PTO Group - 34HP Kawasaki
REF NO

PART NO.

QTY.

5101550
5102126X9
5101551
5102126X10
5101552
5021500
5025010X6
1724815
5025126
5023217
5023216
5025156
5025154
5025058X18
5025480
5101641
5025531
5101492

1
1
1
1
1
1
3
1
3
2
2
1
1
1
1
1
1
1

DESCRIPTION
BRACKET PLATE, LOWER 34 & 37 (SV) (S/N: & 2014450901 Below)
AIR INLET TUBE (SV) (S/N: & 2014450902 Above)
AIR INLET TUBE (SV) (S/N: & 2014450901 Below)
BREATHER TUBE (SV) (S/N: & 2014450902 Above)
BREATHER TUBE (SV) (S/N: & 2014450901 Below)
CLAMP, VINYL INSULATED
BOLT, 1/4-20 X 3/4 GD5 YZ
SOLENOID-4 POLE 12 VOLT DC (TROMBETTA)
NUT, 1/4-20 HEX SERRATED FLANGE
WASHER, Light Lock, 5/16
NUT, Hex Jam, 5/16-24
WASHER, 3/8 SAE
WASHER, 1/4 SAE
BOLT, 3/8-16 X 2-1/4 GD5 TFL
WASHER, 3/8" ID, INTERNAL TOOTH
SCREEN, SPARK ARRESTER (Not Shown)
SET SCREW, 5/16-18 X 3/8, KNURL, W/PATCH
TIE WRAP, 24" LONG (Not Shown)

N
o
R tf
ep o
r
ro
du
ct
io

n

33b
34a
34b
35a
35b
36
37
38
39
40
41
42
43
44
45
46
47
48

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900807 (IS2000ZKAV3461SS)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

27

TP 400-7423-AC-2Z-F

Engine & PTO Group - 27HP Kohler

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900817 (IS2000ZK2761)
5900838 (IS2000ZK2752)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

28

TP 400-7423-AC-2Z-F

Engine & PTO Group - 27HP Kohler
QTY.

5047075
5047033
5048681
5100084
5044062
5021144X1
5101275
5025392
5046416A
5043636
5044617
5022892X9
5025155
5025011X8
5025188
5025011X14
5050407X8
5102864
5025139
5025055X18
5021379
5022892X4
5022892X8
5022892X3
5022892X1
5022892X2
5022892X5
5022892X6
5101641
5025531

1
1
1
1
1
1
1
10
1
1
3
1
8
4
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

DESCRIPTION
PULLEY CRANKSHAFT (DOUBLE A)
SPACER, 1.13 X 1.75 X 1.03
HOSE, OIL DRAIN
CLUTCH, WARNER, #I-5218-134
SPACER, 1.13 X 1.75 X .50
OIL FILTER (12 050 01)
MUFFLER
NUT, 5/16-18 HEX NYLOCK FLANGE
ANCHOR, CLUTCH - BLK
CLUTCH ANCHOR PAD
WASHER, CLUTCH ANCHOR
INLET HOSE (25 326 53-S)
WASHER, 5/16" SAE
BOLT, 5/16-18 X 1" GD5 YZ
WASHER, 5/16" INT. TOOTH LOCK
BOLT, 5/16-18 X 1-3/4" GD5
KEY, 1/4" SQ. X 1
BOLT, CRANKSHAFT 7/16 X 2 1/2
ENGINE, 27HP KOHLER, VERTICAL
NUT 5/16-18 HEX SERRATED FLANGE (LARGE)
BOLT, 5/16-18 X 2-1/4 TFL, GD5 YZ
GROMMET, 7/8
KIT, 5.5" HD AIR CLEANER (24 743 22-S) (Includes Ref Nos. 24 - 30.)
HOUSING MOUNT BRACKET (25 126 02-S)
RAIN COVER
PRIMARY PAPER ELEMENT
SECONDARY ELEMENT
END CAP (25 096 06-S)
DUST VALVE (24 462 07-S)
SCREEN, SPARK ARRESTER (Not Shown)
SET SCREW, 5/16-18 X 3/8, KNURL, W/PATCH

n

PART NO.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900817 (IS2000ZK2761)
5900838 (IS2000ZK2752)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

29

TP 400-7423-AC-2Z-F

Engine & PTO Group - 25HP Kawasaki

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900809 (IS2000ZKAV2561)
5900840 (IS2000ZKAV2552)
5900815 (IS2000ZKAV2561 CAL)
5900839 (IS2000ZKAV25/52 AUS/NZ)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

30

TP 400-7423-AC-2Z-F

Engine & PTO Group - 25HP Kawasaki
QTY.

5047075
5047033
5022234
5100084
5100456
5021334X1
5100975
5025392
5046416A
5043636
5044617
5046446
5025155
5025011X8
5025188
5025011X14
5050407X8
5102865
5025139
5025055X18
5021379
5048681
5023143
5023146
5023139
5023144
5023140
5023141
5023147
5023138
5023145
5023142
5023149
5023148
5101641
5025010X6
1724815
5025126
5023217
5023216

1
1
1
1
1
1
1
12
1
1
3
2
10
4
4
6
1
1
1
1
1
1
1
1
3
1
1
1
1
2
1
1
1
1
1
1
2
1
2
2
2

DESCRIPTION
PULLEY CRANKSHAFT (DOUBLE A)
SPACER, 1.13 X 1.75 X 1.03
ADAPTER, OIL DRAIN
CLUTCH, WARNER, #I-5218-134
SPACER, 1.13 X 1.75 X .375
OIL FILTER (49065-2078)
MUFFLER, KAWI 21-25 HP
NUT, 5/16-18 HEX NYLOCK FLANGE
ANCHOR, CLUTCH - BLK
CLUTCH ANCHOR PAD
WASHER, CLUTCH ANCHOR
SPACER, .39 X 1.00 X .80
WASHER, 5/16" SAE
BOLT, 5/16-18 X 1" GD5 YZ
WASHER, 5/16" INT. TOOTH LOCK
BOLT, 5/16-18 X 1-3/4" GD5
KEY, 1/4" SQ. X 1
BOLT, CRANKSHAFT 7/16 X 2 3/4
ENGINE, 25HP KAWASAKI
NUT 5/16-18 HEX SERRATED FLANGE (LARGE)
BOLT, 5/16-18 X 2-1/4 TFL, GD5 YZ
GROMMET, 7/8
HOSE, OIL DRAIN
RAIN COVER
CLAMP
AIR FILTER ASSEMBLY (Includes Ref Nos. 27 - 31)
RUBBER, Dust Valve
AIR FILTER, SECONDARY
AIR FILTER, PRIMARY
CLAMP, CAP
CAP END, FILTER CASE
CASE, BRACKET, COMPLETE
BRACKET PLATE
AIR INLET TUBE
BREATHER TUBE
SCREEN, SPARK ARRESTER (Not Shown)
BOLT, 1/4-20 X 3/4" GD5 YZ
SOLENOID-4 POLE 12 VOLT DC (TROMBETTA)
NUT, 1/4-20 HEX SERRATED FLANGE
WASHER, Light Lock, 5/16
NUT, Hex Jam, 5/16-24

n

PART NO.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900809 (IS2000ZKAV2561)
5900840 (IS2000ZKAV2552)
5900815 (IS2000ZKAV2561 CAL)
5900839 (IS2000ZKAV25/52 AUS/NZ)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

31

TP 400-7423-AC-2Z-F

Engine & PTO Group - 25HP Kawasaki

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900809 (IS2000ZKAV2561)
5900840 (IS2000ZKAV2552)
5900815 (IS2000ZKAV2561 CAL)
5900839 (IS2000ZKAV25/52 AUS/NZ)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

32

TP 400-7423-AC-2Z-F

Engine & PTO Group - 25HP Kawasaki
REF NO

PART NO.
5100969
5025470
5025531
5101492

QTY.
1
2
1
1

DESCRIPTION
EXTENSION, TAILPIPE, 3"
SCREW, SELF-TAP, #8-32 X 3/8. WASH HEX, CZ
SET SCREW, 5/16-18 X 3/8, KNURL, W/PATCH
TIE WRAP, 24" LONG (Not Shown)

N
o
R tf
ep o
r
ro
du
ct
io

n

42
43
44
45

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900809 (IS2000ZKAV2561)
5900840 (IS2000ZKAV2552)
5900815 (IS2000ZKAV2561 CAL)
5900839 (IS2000ZKAV25/52 AUS/NZ)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

33

TP 400-7423-AC-2Z-F

Engine & PTO Group - 26HP Kawasaki Liquid Cooled

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900810 (IS2000ZKAV2661)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

34

TP 400-7423-AC-2Z-F

Engine & PTO Group - 26HP Kawasaki Liquid Cooled
QTY.

5401138B
5025156
5061314
5023143
5023146
5023139
5023144
5023140
5023141
5023147
5023138
5025013X8
5025055X18
5046416A
5025394
5043636
5044617
5025392
5025155
5102855
5021379
5100084
5023394
5100456
5047075
5050407X8
5047033
5025011X14
5046446
5022234
5048681
5021500
5025188
5025237X25
5025010X8
5025391
5025139
5025057
5025011X8
5101641

1
4
1
1
1
3
1
1
1
1
2
1
4
1
1
8
1
4
8
4
1
1
1
1
1
1
1
1
2
2
1
2
1
5
4
1
1
1
4
2
1

DESCRIPTION
GUARD, RADIATOR SCREEN PROTECTOR - RED
WASHER 3/8" SAE
MUFFLER, 26 HP KAWASAKI LC
ENGINE, 26 HP KAWASAKI, LC
RAIN CAP
CLAMP
AIR FILTER ASSEMBLY, COMPLETE
RUBBER, Dust Valve
AIR FILTER, SECONDARY
AIR FILTER, PRIMARY
CLAMP, CAP
CAP, FILTER CASE
BOLT, 3/8-16 X 1" GD5
BOLT, 5/16-18 X 2-1/4 TFL, GD5 YZ
ANCHOR, CLUTCH - BLK
NUT, 3/8-16 HEX NYLOCK FLANGE
CLUTCH ANCHOR PAD
WASHER, .34 X 1.25 X 10 GA
NUT, 5/16-18 HEX NYLOCK FLANGE
WASHER, 5/16" SAE
BOLT, CRANKSHAFT, M10 X 65MM
GROMMET, 7/8
CLUTCH, WARNER, #I-5218-134
SENDER, WATER TEMPERATURE (Not shown.)
SPACER, 1.13 X 1.75 X .375
PULLEY, CRANKSHAFT (DOUBLE A)
KEY, 1/4" SQ. X 1"
SPACER, 1.13 X 1.75 X 1.03
BOLT, 5/16-18 X 1-3/4" GD5
SPACER, .39 X 1.00 X .80
ADAPTER, OIL DRAIN
HOSE, OIL DRAIN
CLAMP, VINYL
WASHER, 5/16" INT. TOOTH LOCK
BOLT, M8-1.25 X 25MM GD8.8
BOLT,1/4-20 X 1" GD5
NUT, 1/4-20 HEX NYLOCK FLANGE
NUT 5/16-18 HEX SERRATED FLANGE (LARGE)
NUT 5/16-18 HEX NYLON LOCK
BOLT, 5/16-18 X 1" GD5 YZ
SCREEN, SPARK ARRESTER (Not shown)

n

PART NO.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900810 (IS2000ZKAV2661)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

35

TP 400-7423-AC-2Z-F

Engine & PTO Group - 26HP Kawasaki Liquid Cooled

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900810 (IS2000ZKAV2661)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

36

TP 400-7423-AC-2Z-F

Engine & PTO Group - 26HP Kawasaki Liquid Cooled
PART NO.

QTY.

42
43
44
45
46
47
48

5025059X8
5023396X1
5025531
5101492

1
1
1
1
1
1
1

DESCRIPTION
BOLT, 5/16-18 X 1" , SELF-TAPPING
OIL FILTER, KAWI # 49065-2086 (Not shown)
SPRING CLIP, KAWI # 42144-2346 (Not shown)
SCREEN, BOTTOM, KAWI # 11053-2104-9H (Not shown)
SCREEN, TOP, BUBBLE, KAWI # 14037-2146-9H (Not shown)
SET SCREW, 5/16-18 X 3/8, KNURL, W/PATCH
TIE WRAP, 24" LONG (Not Shown)

N
o
R tf
ep o
r
ro
du
ct
io

n

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900810 (IS2000ZKAV2661)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

37

TP 400-7423-AC-2Z-F

Engine & PTO Group - 26HP Kawasaki Air Cooled

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900939 (IS2000ZKAV2652 ANSI EXP)
5900879 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

38

TP 400-7423-AC-2Z-F

Engine & PTO Group - 26HP Kawasaki Air Cooled
QTY.

5047075
5047033
5022234
5100084
5100456
5102278X1
5102127
5025392
5046416A
5043636
5044617
5046446
5025155
5025011X8
5025532
5025011X14
5050407X8
5102864
5025139
5025055X18
5021379
5048681
5102126X7
5023146
5102126X1
5102126X8
5102126X4
5102126X3
5025531
5102126X2
5102126X5
5102126X6
5102126X9
5102126X10
5021500
5025010X6
1724815
5025126
5023217
5023216

1
1
1
1
1
1
1
9
1
1
4
2
4
4
3
2
1
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
3
1
3
2
2

DESCRIPTION
PULLEY, CRANKSHAFT (DOUBLE A)
SPACER, 1.13 X 1.75 X 1.03
ADAPTER, OIL DRAIN
CLUTCH,5218-134, WARNER
SPACER, 1.13 X 1.75 X .38
FILTER, OIL, 22, 24 & 26 HP, KAWASAKI
MUFFLER, 26HP KAWASAKI, FX730V
NUT, 5/16-18 HEX NYLOCK FLANGE
ANCHOR, CLUTCH - BLK
CLUTCH ANCHOR PAD
WASHER, .34 X 1.25 X 10 GA
SPACER, .39 X 1.00 X .80
WASHER, 5/16 SAE
BOLT, 5/16-18 X 1 GD5 YZ
BOLT, HEX FLG, SER GD5 3/8-16 X 1-1/4, PATCH
BOLT, 5/16-18 X 1-3/4 GD5 YZ
KEY, 1/4 SQ. X 1.00
BOLT, CRANKSHAFT, 7/16"X2-1/2
ENGINE, 26HP, KAWASAKI (FX730V) (Includes Ref Nos. 24 - 29 & 31 - 35)
NUT, 5/16-18 HEX SERRATED FLANGE (LARGE)
BOLT, 5/16-18 X 2-1/4 TFL, GD5 YZ
GROMMET, 7/8
HOSE, OIL DRAIN
RAIN CAP, AIR FILTER, 22,24&26HP, KAWASAKI (SV)
CLAMP (SV)
AIR FILTER ASSEMBLY, 22,24&26HP KAWASAKI (SV)
RUBBER, Dust Valve, 22,24&26HP KAWASAKI (SV)
AIR FILTER, SECONDARY, 22, 24&26HP KAWASAKI (SV)
AIR FILTER, PRIMARY,22,24&26HP, KAWASAKI (SV)
SET SCREW, 5/16-18 X 3/8, KNURL, W/PATCH
CAP END, FILTER CASE, 22,24&26HP, KAWASAKI (SV)
BRACKET PLATE, UPPER, 22,24&26HP KAWASAKI (SV)
BRACKET PLATE, LOWER, 22,24&26HP KAWASAKI (SV)
AIR INLET TUBE, 22,24&26HP KAWASAKI (SV)
BREATHER TUBE, 22,24&26HP KAWASAKI (SV)
CLAMP, VINYL INSULATED
BOLT, 1/4-20 X 3/4 GD5 YZ
SOLENOID-4 POLE 12 VOLT DC (TROMBETTA)
NUT, 1/4-20 HEX SERRATED FLANGE
WASHER, Light Lock, 5/16
NUT, Hex Jam, 5/16-24

n

PART NO.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900939 (IS2000ZKAV2652 ANSI EXP)
5900879 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

39

TP 400-7423-AC-2Z-F

Engine & PTO Group - 26HP Kawasaki Air Cooled

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900939 (IS2000ZKAV2652 ANSI EXP)
5900879 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

40

TP 400-7423-AC-2Z-F

Engine & PTO Group - 26HP Kawasaki Air Cooled
REF NO

PART NO.

QTY.

5101492
5025154

1
1

DESCRIPTION
TIE WRAP, 24" LONG (Not Shown)
WASHER, 1/4 SAE

N
o
R tf
ep o
r
ro
du
ct
io

n

42
43

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900939 (IS2000ZKAV2652 ANSI EXP)
5900879 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

41

TP 400-7423-AC-2Z-F

Pump Drive Group

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900939 (IS2000ZKAV2652 ANSI EXP)
5900879 (IS2000ZKAV2661)
5900838 (IS2000ZK2752)
5900809 (IS2000ZKAV2561)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900810 (IS2000ZKAV2661)

5900815 (IS2000ZKAV2561 CAL)
5900980 (IS2000ZB3061 ANSI EXP)
5900817 (IS2000ZK2761)
5900816 (IS2000ZB3061 CAL)
5900945 (IS2000ZKAV2652)
5900813 (IS2000ZKAV25/61 AUS/NZ)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

42

5900814 (IS2000ZBV30/61 AUS/NZ)
5900840 (IS2000ZKAV2552)
5900807 (IS2000ZKAV3461SS)
5900968 (IS2000ZB3061)
5900811 (IS2000ZB3061)
5900808 (IS2000ZKAV2761)

TP 400-7423-AC-2Z-F

Pump Drive Group
QTY.

5025128
5023254
5025010X8
5025013X10
5025394
5100555
5025013X18
5046430A
5025013X14
5025100
5025034
5022847
5021812
5022586
5022587
5022621
5022157
5102004
5045475
5025305
5025013X32

4
2
4
4
3
1
1
1
1
1
2
1
1
2
2
1
2
1
1
1
1

DESCRIPTION
NUT, 3/8-16 HEX SERRATED FLANGE
KEY, 5MM SQ W/ RADIUS
BOLT, 1/4-20 X 1" GD5
BOLT, 3/8-16 X 1-1/4" GD5
NUT, 3/8-16 HEX NYLOCK FLANGE
BELT, # 41-1299, BANDED
BOLT, 3/8-16 X 2-1/4" GD5 YZ
WELD, ARM, PUMP DRIVE IDLER - BLK
BOLT, 3/8-16 X 1-3/4" GD5
NUT, 3/8-16 HEX SIDE LOCK
NUT, 3/8-16 HEX
SPRING, EXTENSION, SWIVEL END
EYE BOLT, 3/8-16 X 6", 1" EYE
PULLEY, PUMP DRIVE
BUSHING, TAPERED HUB
PULLEY, IDLER, SINGLE FLANGE
BUSHING, BRASS, 1.25 X 1 X 1.25
SPACER, .39 X 1.00 X 2.55, SS
SPACER, .45 X 1.88 X .38
WASHER, .41 X 1.75 X .14
BOLT, 3/8-16 X 4" GD5

n

PART NO.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900939 (IS2000ZKAV2652 ANSI EXP)
5900879 (IS2000ZKAV2661)
5900838 (IS2000ZK2752)
5900809 (IS2000ZKAV2561)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900810 (IS2000ZKAV2661)

5900815 (IS2000ZKAV2561 CAL)
5900980 (IS2000ZB3061 ANSI EXP)
5900817 (IS2000ZK2761)
5900816 (IS2000ZB3061 CAL)
5900945 (IS2000ZKAV2652)
5900813 (IS2000ZKAV25/61 AUS/NZ)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

43

5900814 (IS2000ZBV30/61 AUS/NZ)
5900840 (IS2000ZKAV2552)
5900807 (IS2000ZKAV3461SS)
5900968 (IS2000ZB3061)
5900811 (IS2000ZB3061)
5900808 (IS2000ZKAV2761)

TP 400-7423-AC-2Z-F

Motion Control Group

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900808 (IS2000ZKAV2761)
5900811 (IS2000ZB3061)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900879 (IS2000ZKAV2661)
5900838 (IS2000ZK2752)
5900839 (IS2000ZKAV25/52 AUS/NZ)

5900840 (IS2000ZKAV2552)
5900807 (IS2000ZKAV3461SS)
5900980 (IS2000ZB3061 ANSI EXP)
5900810 (IS2000ZKAV2661)
5900968 (IS2000ZB3061)
5900816 (IS2000ZB3061 CAL)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

44

5900809 (IS2000ZKAV2561)
5900945 (IS2000ZKAV2652)
5900817 (IS2000ZK2761)
5900815 (IS2000ZKAV2561 CAL)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900813 (IS2000ZKAV25/61 AUS/NZ)

TP 400-7423-AC-2Z-F

Motion Control Group
QTY.

5025156
5025013X8
5025394
5021098
5022628
5046420
5400653B
5025424
5025392
5101307
5022645
5023260
5023212
5025033
5020047
5025155
5025011X10
5400636B
5100940
5021146
5048264
5025013X20
5025013X24
5025013X10
5021499
5025096
5025055X14
5025139
5025013X14
5403620B
5403619B
5400820B
5400824B
5025011X8
5021451
5025179X4
5025029
5401248
5025431
5025011X8
5400637B

8
2
6
2
2
2
2
2
10
4
2
2
2
6
2
10
6
1
2
2
6
4
2
2
2
8
4
12
4
1
1
1
1
2
2
4
4
2
4
4
1

DESCRIPTION
WASHER 3/8" SAE
BOLT,3/8-16 X 1" GD5 YZ
NUT, 3/8-16 HEX NYLOCK FLANGE
BEARING, BRONZE FLANGE 3/4"
BALL JOINT, 5/16-24, LH FEMALE
ROD, HYDRO LINKAGE
MOUNT, REVERSE RETURN - RED
WASHER, 3/8 X 1" X 1/16, NYLON F/W
NUT, 5/16-18 HEX NYLON FLANGE
10MM BALL STUD, 5/16-18 X 3/4
SPRING, REVERSE RETURN
BUSHING, NYLON
NUT, 5/16 HEX LH
NUT, HEX 5/16-24
COLLAR, 5/16" SET
WASHER, 5/16" SAE
BOLT, 5/16-18 X 1-1/4" GD5 YZ
WELD, HANDLE MOTION CONTROL LH - RED
DAMPENER, CONTROL
BALL JOINT, 5/16-24, FEMALE
SPACER, .63 X .39 X 1.50
BOLT, 3/8-16 X 2-1/2" GD5 YZ
BOLT, 3/8-16 X 3" GD5 YZ
BOLT, 3/8-16 X 1-1/4" GD5
BEARING, FLANGE
NUT, 3/8-16 HEX NYLON LOCK
BOLT, 5/16-18 X 1-3/4" GD5 TFL
NUT, 5/16-18 HEX SERRATED FLANGE (LARGE)
BOLT, 3/8-16 X 1-3/4" GD5
WELD, CONTROL SHAFT - RH - RED
WELD, CONTROL SHAFT - LH - RED
WELD, NEUTRAL LOCK, LH - RED
WELD, NEUTRAL LOCK, RH - RED
BOLT, 5/16-18 X 1" GD5 YZ
SWITCH, PLUNGER, N.O.
SCREW, #10-24 X 1/2" ROUND SLOTTED
NUT, #10-24 HEX
GUARD, RUBBER MOTION CONTROLS
PUSH RIVET (TREE TYPE) BLACK
BOLT, 5/16-18 X 1 GD5 YZ
WELD, HANDLE MOTION CONTROL RH - RED

n

PART NO.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900808 (IS2000ZKAV2761)
5900811 (IS2000ZB3061)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900879 (IS2000ZKAV2661)
5900838 (IS2000ZK2752)
5900839 (IS2000ZKAV25/52 AUS/NZ)

5900840 (IS2000ZKAV2552)
5900807 (IS2000ZKAV3461SS)
5900980 (IS2000ZB3061 ANSI EXP)
5900810 (IS2000ZKAV2661)
5900968 (IS2000ZB3061)
5900816 (IS2000ZB3061 CAL)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

45

5900809 (IS2000ZKAV2561)
5900945 (IS2000ZKAV2652)
5900817 (IS2000ZK2761)
5900815 (IS2000ZKAV2561 CAL)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900813 (IS2000ZKAV25/61 AUS/NZ)

TP 400-7423-AC-2Z-F

Motion Control Group

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900808 (IS2000ZKAV2761)
5900811 (IS2000ZB3061)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900879 (IS2000ZKAV2661)
5900838 (IS2000ZK2752)
5900839 (IS2000ZKAV25/52 AUS/NZ)

5900840 (IS2000ZKAV2552)
5900807 (IS2000ZKAV3461SS)
5900980 (IS2000ZB3061 ANSI EXP)
5900810 (IS2000ZKAV2661)
5900968 (IS2000ZB3061)
5900816 (IS2000ZB3061 CAL)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

46

5900809 (IS2000ZKAV2561)
5900945 (IS2000ZKAV2652)
5900817 (IS2000ZK2761)
5900815 (IS2000ZKAV2561 CAL)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900813 (IS2000ZKAV25/61 AUS/NZ)

TP 400-7423-AC-2Z-F

Motion Control Group
REF NO

PART NO.
5047004A
5022068
5025170

QTY.

DESCRIPTION

2
2
4

MOUNT, CONTROL ARM - BLK
GRIP, FOAM, 3/4" ID, 16" LONG
WASHER, 5/16 LOCK YZ

N
o
R tf
ep o
r
ro
du
ct
io

n

42
43
44

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900808 (IS2000ZKAV2761)
5900811 (IS2000ZB3061)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900879 (IS2000ZKAV2661)
5900838 (IS2000ZK2752)
5900839 (IS2000ZKAV25/52 AUS/NZ)

5900840 (IS2000ZKAV2552)
5900807 (IS2000ZKAV3461SS)
5900980 (IS2000ZB3061 ANSI EXP)
5900810 (IS2000ZKAV2661)
5900968 (IS2000ZB3061)
5900816 (IS2000ZB3061 CAL)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

47

5900809 (IS2000ZKAV2561)
5900945 (IS2000ZKAV2652)
5900817 (IS2000ZK2761)
5900815 (IS2000ZKAV2561 CAL)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900813 (IS2000ZKAV25/61 AUS/NZ)

TP 400-7423-AC-2Z-F

Hydraulic Group

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900807 (IS2000ZKAV3461SS)
5900968 (IS2000ZB3061)
5900840 (IS2000ZKAV2552)
5900945 (IS2000ZKAV2652)
5900980 (IS2000ZB3061 ANSI EXP)
5900811 (IS2000ZB3061)

5900810 (IS2000ZKAV2661)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900879 (IS2000ZKAV2661)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900816 (IS2000ZB3061 CAL)
5900808 (IS2000ZKAV2761)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

48

TP 400-7423-AC-2Z-F

Hydraulic Group
PART NO.
5022634
5023338
5023267
5022920
5023346
5023461
5023276
5050860X22
5050860X6P5
5050860X6
5050860X8
5050860X23
5050933X23P5
5102098
5102099
5100017
5061712
5022922
5021164
5023268
5023118
5600050
5023121
5023119
5102682
5100407
5102681
5100410
5022042X2
5022042X3
5102174
5102175
5023096
1719168
5025010X6
5025154
5025169
5025013X10
5025128
5100162
5022571X1

QTY.

DESCRIPTION

2
4
2
2
1
3
2
1
1
2
1
1
1
2
2
1
1
1
2
11
1
1
1
1
1
1
1
1
2
2
1
1
1
1
2
2
2
4
4
2
2

ADAPTER, HYD.
FITTING, #8 JIC - #8 O-RING, 45 DEG.
ADAPTER, 90 DEG, 9/16-3/8 BARB
FITTING, TEE, 1/2 HOSE
ADAPTER, 90 DEG, 9/16-5/8 BARB
ADAPTER, 45 DEG, 9/16-3/8 BARB
FITTING, #10 ORING-#8 JIC, 90D
HOSE, 3/8" PUSH-LOCK, 22.00"
HOSE, 3/8" PUSH-LOCK, 6.50"
HOSE, 3/8" PUSH-LOCK, 6.00"
HOSE, 3/8" PUSH-LOCK, 8.00"
HOSE, 3/8" PUSH-LOCK, 23.00"
HOSE, 5/8" PUSH-LOCK, 23.50"
HOSE ASSEMBLY, 26.50"
HOSE ASSEMBLY, 22.50"
CAP, HYDRAULIC
TANK, HYDRAULIC, ASSEMBLY (Includes Ref. Nos 21,22,23, and 24)
CLAMP, #4 HOSE, STAINLESS
CLAMP, #10 HOSE, STAINLESS
CLAMP, HOSE
FITTING, ELBOW, 3/8"
KIT, GROMMET
GROMMET
FITTING, ELBOW, 5/8"
*WHEEL MOTOR, LH, 14.5 CUBIC INCH (S/N: 2014450934 & ABOVE)
WHEEL MOTOR, 15IN3/REV - LH (S/N: 2014450933 & BELOW)
*WHEEL MOTOR, RH, 14.5 CUBIC INCH (S/N: 2014450934 & ABOVE)
WHEEL MOTOR, 15IN3/REV - RH (S/N: 2014450933 & BELOW)
KEY
NUT, CASTLE, 1-20
PUMP, HYD, 12CC - LH, PK-3HBQ-FV1F-XXXX
PUMP, HYD, 12CC - RH, PK-3KBQ-FV1F-XXXX
FILTER HEAD, HYDRAULIC
FILTER, OIL
BOLT, 1/4"-20 X 3/4" GD5 YZ
WASHER, 1/4" SAE
WASHER, 1/4" LOCK
BOLT, 3/8-16 X 1-1/4" GD5
NUT, 3/8-16 HEX SERRATED FLANGE
SHROUD, FAN
FAN, HYD. PUMP

n

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25a
25b
26a
26b
27
28
29
30
31
32
33
34
35
36
37
38
39

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes
*When installing this wheel motor on older units, you will need hardware kit # 5600578.
The above parts group applies to the following Mfg. Nos.:
5900807 (IS2000ZKAV3461SS)
5900968 (IS2000ZB3061)
5900840 (IS2000ZKAV2552)
5900945 (IS2000ZKAV2652)
5900980 (IS2000ZB3061 ANSI EXP)
5900811 (IS2000ZB3061)

5900810 (IS2000ZKAV2661)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900879 (IS2000ZKAV2661)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900816 (IS2000ZB3061 CAL)
5900808 (IS2000ZKAV2761)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

49

TP 400-7423-AC-2Z-F

Hydraulic Group

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900807 (IS2000ZKAV3461SS)
5900968 (IS2000ZB3061)
5900840 (IS2000ZKAV2552)
5900945 (IS2000ZKAV2652)
5900980 (IS2000ZB3061 ANSI EXP)
5900811 (IS2000ZB3061)

5900810 (IS2000ZKAV2661)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900879 (IS2000ZKAV2661)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900816 (IS2000ZB3061 CAL)
5900808 (IS2000ZKAV2761)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

50

TP 400-7423-AC-2Z-F

Hydraulic Group
PART NO.

QTY.

40

5025203X16

2

DESCRIPTION
PIN, COTTER, 1/8' X 2"

N
o
R tf
ep o
r
ro
du
ct
io

n

REF NO

Footnotes
*When installing this wheel motor on older units, you will need hardware kit # 5600578.
The above parts group applies to the following Mfg. Nos.:
5900807 (IS2000ZKAV3461SS)
5900968 (IS2000ZB3061)
5900840 (IS2000ZKAV2552)
5900945 (IS2000ZKAV2652)
5900980 (IS2000ZB3061 ANSI EXP)
5900811 (IS2000ZB3061)

5900810 (IS2000ZKAV2661)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900879 (IS2000ZKAV2661)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900816 (IS2000ZB3061 CAL)
5900808 (IS2000ZKAV2761)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

51

TP 400-7423-AC-2Z-F

Hydraulic Mount Group

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900879 (IS2000ZKAV2661)
5900808 (IS2000ZKAV2761)
5900809 (IS2000ZKAV2561)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900816 (IS2000ZB3061 CAL)
5900811 (IS2000ZB3061)

5900945 (IS2000ZKAV2652)
5900980 (IS2000ZB3061 ANSI EXP)
5900840 (IS2000ZKAV2552)
5900838 (IS2000ZK2752)
5900968 (IS2000ZB3061)
5900839 (IS2000ZKAV25/52 AUS/NZ)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

52

5900813 (IS2000ZKAV25/61 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)
5900807 (IS2000ZKAV3461SS)
5900810 (IS2000ZKAV2661)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900817 (IS2000ZK2761)

TP 400-7423-AC-2Z-F

Hydraulic Mount Group
PART NO.

QTY.

1
2
3
4
5
6
7
8
9
10
11
12
13
13
14
15
16
17

5025013X12
5025391
5025154
5025010X8
5025156
5025013X10
5025394
5061746B
5400654B
5401952B
5401955B
5408215B
5401954B
5021500
5401736B
5025010X6

1
4
4
4
1
6
2
6
2
1
1
2
1
1
1
2
1
4

DESCRIPTION
TANK, HYDRAULIC, ASSEMBLY (See Hydraulic Group)
BOLT, 3/8-16 X 1-1/2" GD5 YZ
NUT, 1/4-20 HEX NYLOCK FLANGE
WASHER, 1/4" SAE
BOLT, 1/4-20 X 1" GD5
WASHER 3/8" SAE
BOLT, 3/8-16 X 1-1/4" GD5
NUT, 3/8-16 HEX NYLOCK FLANGE
BRACKET, HYDRAULIC TANK
WELD, HYD TANK MOUNT - RED
CAP, HYDRAULIC (See Hydraulic Group)
BAR, STABILIZER, SIDE - RED
BAR, STABILIZER, CENTER - RED (Non-Evap Canister Equipped Models)
BRACKET, CANISTER MOUNT, IS2000 - RED (Evap Canister Equipped Models)
PLATE, HYDRAULIC TANK MOUNT - RED
CLAMP, VINYL INSULATED
BRACKET, HOSE - RED
BOLT, 1/4-20 X 3/4" GD5

N
o
R tf
ep o
r
ro
du
ct
io

n

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900879 (IS2000ZKAV2661)
5900808 (IS2000ZKAV2761)
5900809 (IS2000ZKAV2561)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900816 (IS2000ZB3061 CAL)
5900811 (IS2000ZB3061)

5900945 (IS2000ZKAV2652)
5900980 (IS2000ZB3061 ANSI EXP)
5900840 (IS2000ZKAV2552)
5900838 (IS2000ZK2752)
5900968 (IS2000ZB3061)
5900839 (IS2000ZKAV25/52 AUS/NZ)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

53

5900813 (IS2000ZKAV25/61 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)
5900807 (IS2000ZKAV3461SS)
5900810 (IS2000ZKAV2661)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900817 (IS2000ZK2761)

TP 400-7423-AC-2Z-F

Hydraulic Group - 25HP Kawasaki & 27HP Kohler Models (S/N: 2014337845 & Below)

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900840 (IS2000ZKAV2552)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900817 (IS2000ZK2761)
5900809 (IS2000ZKAV2561)
5900815 (IS2000ZKAV2561 CAL)

5900838 (IS2000ZK2752)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

54

TP 400-7423-AC-2Z-F

Hydraulic Group - 25HP Kawasaki & 27HP Kohler Models (S/N: 2014337845 & Below)
PART NO.
5022634
5023338
5023267
5022920
5023346
5023461
5023276
5050860X16
5050860X6P5
5050860X6
5050860X8
5050860X23
5050933X25
5102098
5102099
5100017
5061712
5022922
5021164
5023268
5023118
5600050
5023121
5023119
5100407
5100410
5022042X2
5022042X3
5102174
5102175
5023096
1719168
5025010X6
5025154
5025169
5025013X10
5025128
5100162
5022571X1
5025203X16

QTY.

DESCRIPTION

2
4
2
2
1
3
2
1
1
2
1
1
1
2
2
1
1
1
2
11
1
1
1
1
1
1
2
2
1
1
1
1
2
2
2
4
4
2
2
2

ADAPTER, HYDRAULIC
FITTING, #8 JIC - #8 O-RING 45DEG.
ADAPTER, 90 DEG. 9/16 - 3/8 BARB
FITTING, TEE, 1/2" HOSE
ADAPTER, 90 DEG. 9/16 - 5/8 BARB
ADAPTER, 45, 9/16 - 3/8 BARB
FITTING, #10 ORING-#8 JIC, 90D
HOSE, 3/8" PUSH-LOCK, 16.00"
HOSE, 3/8" PUSH-LOCK, 6.50"
HOSE, 3/8" PUSH-LOCK, 6.00"
HOSE, 3/8" PUSH-LOCK, 8.00"
HOSE, 3/8" PUSH-LOCK, 23.00"
HOSE, 5/8" PUSH-LOCK, 25.00"
HOSE ASSEMBLY, 26.50"
HOSE ASSEMBLY, 22.50"
CAP, HYDRAULIC
TANK, HYDRAULIC, ASSEMBLY (Includes Ref. Nos 21,22,23, and 24)
CLAMP, #4 HOSE, STAINLESS
CLAMP, #10 HOSE, STAINLESS
CLAMP, HOSE
FITTING, ELBOW, 3/8"
KIT, GROMMET
GROMMET
FITTING, ELBOW, 5/8"
WHEEL MOTOR, 15IN3/REV - LH
WHEEL MOTOR, 15IN3/REV - RH
KEY
NUT, CASTLE, 1-20
PUMP, HYD, 12CC - LH, PK-3HBQ-FV1F-XXXX
PUMP, HYD, 12CC - RH, PK-3KBQ-FV1F-XXXX
FILTER HEAD, HYDRAULIC
FILTER, OIL
BOLT, 1/4"-20 X 3/4" GD5 YZ
WASHER, 1/4" SAE
WASHER, 1/4" LOCK
BOLT, 3/8-16 X 1-1/4" GD5
NUT, 3/8-16 HEX SERRATED FLANGE
SHROUD, FAN
FAN, HYD. PUMP
PIN, COTTER, 1/8" X 2"

n

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900840 (IS2000ZKAV2552)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900817 (IS2000ZK2761)
5900809 (IS2000ZKAV2561)
5900815 (IS2000ZKAV2561 CAL)

5900838 (IS2000ZK2752)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

55

TP 400-7423-AC-2Z-F

Parking Brake Group

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900809 (IS2000ZKAV2561)
5900838 (IS2000ZK2752)
5900879 (IS2000ZKAV2661)
5900810 (IS2000ZKAV2661)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900813 (IS2000ZKAV25/61 AUS/NZ)

5900807 (IS2000ZKAV3461SS)
5900945 (IS2000ZKAV2652)
5900968 (IS2000ZB3061)
5900840 (IS2000ZKAV2552)
5900808 (IS2000ZKAV2761)
5900814 (IS2000ZBV30/61 AUS/NZ)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

56

5900980 (IS2000ZB3061 ANSI EXP)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900816 (IS2000ZB3061 CAL)
5900811 (IS2000ZB3061)
5900817 (IS2000ZK2761)
5900815 (IS2000ZKAV2561 CAL)

TP 400-7423-AC-2Z-F

Parking Brake Group
PART NO.

QTY.

5403948B
5021397
5023490
5025170
5025013X6
5025394
5025011X14
5025392
5047084B
5025013X12
5025128
5102896
5023368
5102897
5023500
5102898
5023501
5042134
5021098
5101038
5041930
5025156
5023320
5048719
5025155
5025045
5100115
5023323
5025033
5025213X8
5025211
5025139
5025011X10
5022182

1
2
8
8
4
6
2
2
2
2
2
2
2
1
1
1
1
2
2
1
2
2
2
2
4
2
2
2
2
2
2
2
1
1

DESCRIPTION
WELD, BRAKE SHAFT - RED
GROMMET, 1-1/4"
BOLT, 5/16-18 X 3/4 12PT FLANGE - PATCH
WASHER, 5/16" LOCK
BOLT, 3/8-16 X 3/4"
NUT, 3/8-16 HEX NYLOCK FLANGE
BOLT, 5/16-18 X 1-3/4" GD5 YZ
NUT, 5/16-18 Hex Nylock Flange
LINK, BRAKE LOCK
BOLT, 3/8-16 X 1-1/2" GD5 YZ
NUT, 3/8-16 HEX SERRATED FLANGE
BRAKE DRUM, 6", 5 BOLT, KNOTT (S/N: 2015208612 & Above)
DRUM,1-1/4TAPER,5 BOLT (S/N: 2015208611 & Below)
BRAKE SHOE ASM, LH, KNOTT (S/N: 2015208612 & Above)
BRAKE ASSEMBLY, LH (S/N: 2015208611 & Below)
BRAKE SHOE ASM, RH, KNOTT (Not Shown - S/N: 2015208612 & Above)
BRAKE ASSEMBLY, RH (Not Shown - S/N: 2015208611 & Below)
SPACER, .32 X .75 X 1.06
BEARING, BRONZE FLANGE, 3/4
GRIP, FOAM, 3/4 ID X 6 X .187
SPACER, .38 X .50 X .27
WASHER, 3/8" SAE
SPRING, COMPRESSION
SPRING, COMPRESSION
WASHER, 5/16" SAE
NUT, 5/16-24 HEX NYLON LOCK
CABLE, PARKING BRAKE IS2000
CLEVIS, 5/16-24, STEEL, CLEAR ZINC
NUT, 5/16-24 HEX
CLEVIS PIN, 5/16" X 1"
PIN, HAIR, .0585 X 1-1/8, 1/4 EYE, YZ
NUT, 5/16-18 HEX SERRATED FLANGE (LARGE)
BOLT, 5/16-18 X 1-1/4"GD5 YZ
SWITCH, PLUNGER, NO/NC SNAP-IN

n

1
2
3
4
5
6
7
8
9
10
11
12a
12b
13a
13b
14a
14b
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900809 (IS2000ZKAV2561)
5900838 (IS2000ZK2752)
5900879 (IS2000ZKAV2661)
5900810 (IS2000ZKAV2661)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900813 (IS2000ZKAV25/61 AUS/NZ)

5900807 (IS2000ZKAV3461SS)
5900945 (IS2000ZKAV2652)
5900968 (IS2000ZB3061)
5900840 (IS2000ZKAV2552)
5900808 (IS2000ZKAV2761)
5900814 (IS2000ZBV30/61 AUS/NZ)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

57

5900980 (IS2000ZB3061 ANSI EXP)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900816 (IS2000ZB3061 CAL)
5900811 (IS2000ZB3061)
5900817 (IS2000ZK2761)
5900815 (IS2000ZKAV2561 CAL)

TP 400-7423-AC-2Z-F

Rear Suspension Group

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900807 (IS2000ZKAV3461SS)
5900816 (IS2000ZB3061 CAL)
5900968 (IS2000ZB3061)
5900817 (IS2000ZK2761)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900808 (IS2000ZKAV2761)

5900939 (IS2000ZKAV2652 ANSI EXP)
5900815 (IS2000ZKAV2561 CAL)
5900840 (IS2000ZKAV2552)
5900810 (IS2000ZKAV2661)
5900838 (IS2000ZK2752)
5900814 (IS2000ZBV30/61 AUS/NZ)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

58

5900839 (IS2000ZKAV25/52 AUS/NZ)
5900980 (IS2000ZB3061 ANSI EXP)
5900809 (IS2000ZKAV2561)
5900811 (IS2000ZB3061)
5900879 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)

TP 400-7423-AC-2Z-F

Rear Suspension Group
PART NO.

QTY.

5021541
5600187
5061339
5025440
5025488X52
5025056
5020095
5020020
5102689
5061670
5047027
5025017X28
5025553
5061751B
5046860
5025394
5025165
5025293
5025013X24
5025013X18
5025013X8
5100896
5023436
5401166B
5401356B
5401165B
5401357B
5400648B
5025303
5400065
5025392
5025396
5025330
5025013X10
5404051B
5025013X28

4
1
2
2
2
2
2
2
8
8
8
8
8
2
2
24
6
20
2
2
8
2
2
1
1
1
1
2
2
2
2
8
8
12
1
1

DESCRIPTION
BUSHING, FLANGE
KIT, TIE BAR - 52" MODELS ONLY (S/N: 2012944026 & Above)
SPACER, .52 X 1.00 X 3.42
WASHER, 1/2 GD9 YZ
BOLT, 1/2-13 X 6-1/2 GD8, YZ
NUT, 1/2-13 HEX NYLON LOCK
GREASE FITTING, 1/4-28 STRAIGHT (61" Models)
FITTING, GREASE, 45 DEGREE (52" Models)
SPACER, .53 X 1.25 X 1.00, STEP, YZ
SPACER, .53 X 1.00 X 1.00 (61" Models) (S/N: 2014450933 & Below)
SPACER, .51 X .75 X .56 (52" Models) (S/N: 2014776922 & Below)
BOLT, 1/2-13 X 3-1/2" GD5 (61" Models) (S/N: 2014450933 & Below)
BOLT, 1/2-13 X 3.5, DRI-LOC PATCH (All Models) (S/N: 2014450934 & Above)
PLATE, FRAME SUPPORT
SPACER, .39 X 1.00 X .50
NUT, 3/8-16 HEX NYLOCK FLANGE
WASHER, 3/8" FENDER
WASHER, 3/8 GD.9 FLAT
BOLT, 3/8-16 X 3" GD5 YZ (61" Model Use Qty. 1)
BOLT, 3/8-16 X 2-1/4" GD5 YZ
BOLT, 3/8-16 X 1" GD5
SPACER, .390 X 1.00 X 1.00 - YZ
COIL - OVER SHOCK ASSEMBLY
WELD, MOTOR MOUNT, LH (61" Models)
WELD, MOTOR MOUNT - LH - RED (52" Models)
WELD, MOTOR MOUNT, RH (61" Models)
WELD, MOTOR MOUNT - RH - RED (52" Models)
SUPPORT, SWING ARM
SCREW, 5/16-18 X 1 FLAT HD SC (52" Models)
SPACER, .34 X 1.54 X .25 UHMW (52" Models)
NUT, 5/16-18 HEX NYLOCK FLANGE (52" Models)
NUT, 1/2-13 NEX NYLOCK FLANGE (S/N: 2014450933 & Below)
NUT, 1/2-13 SQUARE (S/N: 2014450934 & Above)
BOLT, 3/8-16 X 1-1/4 GD5
WELD, TIE BAR - RED 61" MODELS ONLY
BOLT, 3/8-16 X 3-1/2" GD5 YZ (61" Models)

n

1
2
3
4
5
6
7a
7b
8a
8b
8c
9a
9b
10
11
12
13
14
15
16
17
18
19
20a
20b
21a
21b
22
23
24
25
26a
26b
27
28
29

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900807 (IS2000ZKAV3461SS)
5900816 (IS2000ZB3061 CAL)
5900968 (IS2000ZB3061)
5900817 (IS2000ZK2761)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900808 (IS2000ZKAV2761)

5900939 (IS2000ZKAV2652 ANSI EXP)
5900815 (IS2000ZKAV2561 CAL)
5900840 (IS2000ZKAV2552)
5900810 (IS2000ZKAV2661)
5900838 (IS2000ZK2752)
5900814 (IS2000ZBV30/61 AUS/NZ)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

59

5900839 (IS2000ZKAV25/52 AUS/NZ)
5900980 (IS2000ZB3061 ANSI EXP)
5900809 (IS2000ZKAV2561)
5900811 (IS2000ZB3061)
5900879 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)

TP 400-7423-AC-2Z-F

Deck Lift Group - All 52" Models & 61" Models S/N: 2014341047 & Below

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900816 (IS2000ZB3061 CAL)
5900811 (IS2000ZB3061)
5900945 (IS2000ZKAV2652)
5900810 (IS2000ZKAV2661)
5900809 (IS2000ZKAV2561)
5900817 (IS2000ZK2761)

5900839 (IS2000ZKAV25/52 AUS/NZ)
5900808 (IS2000ZKAV2761)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)
5900879 (IS2000ZKAV2661)
5900807 (IS2000ZKAV3461SS)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

60

5900838 (IS2000ZK2752)
5900840 (IS2000ZKAV2552)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900939 (IS2000ZKAV2652 ANSI EXP)

TP 400-7423-AC-2Z-F

Deck Lift Group - All 52" Models & 61" Models S/N: 2014341047 & Below
PART NO.

QTY.

5025394
5025212X7
5023343
5021811
5020095
5400719B
5021880
5020639
5025154
5025126
5025010X6
5023498
5025146X16
5400769B
5025203X6
5045178
5022434
5025089
5025017X22
5025056
5401664B
5401665B
5025040
5045447
5100149
5100148
5100247
5020441
5023355
5025100
5401671B
5401672B
5061569B
1715834
5100380
5025013X10
5025440
5025017X28
5025156
5025017X14
5047103

4
1
8
1
4
1
1
1
2
2
2
1
1
1
1
4
13
13
2
7
1
1
8
2
2
2
2
4
1
1
1
1
1
1
1
2
11
3
9
2
1

DESCRIPTION
NUT, 3/8-16 HEX NYLOCK FLANGE
PIN, CLEVIS, 1/4" x 7/8"
BUSHING, 1.00 X 1.13 X 1.38, PLASTIC
EYEBOLT, 3/2-16 X 8", 1" EYE (61" Model Qty. 2)
GREASE FITTING, 1/4-28 STRAIGHT
WELD, ROD DECK LIFT - RED
GRIP, FOAM
SPRING, EXTENSION
WASHER, 1/4" SAE
NUT, 1/4-20 HEX SERR. FLANGE
BOLT, 1/4-20 X 3/4" GD5 YZ
PIN, HITCH, 1/2 X 2.00 OAL, YP
BOLT, 3/8-16 X 2", CARRIAGE
WELD, DECK ADJUST LINK - RED
PIN, COTTER, 1/8" X 3/4 (61" Model Qty. 2)
SPACER, .52 X 1.00 X .75
BALL JOINT, 1/2-20, MALE
NUT, 1/2-20 HEX JAM
BOLT, 1/2-13 X 2-3/4" GD5
NUT, 1/2-13 HEX NYLON LOCK
WELD, REAR LIFT - LH - RED
WELD, REAR LIFT - RH - RED (Not Shown)
NUT, 5/8-11 HEX
PIVOT, SPRING ROD
ROD, DECK LIFT BENT
ROD, DECK LIFT, OUTER
ROD, 5/8-11 X 9.00
COLLAR, 5/8" SPLIT
SPRING, DECK LIFT ASSIST (61" Model Qty. 2)
NUT, 3/8-16 HEX SIDE LOCK
WELD, PIVOT DECK LIFT - LEFT - RED
WELD, PIVOT DECK LIFT - RIGHT - RED (Not Shown)
PEDAL, FOOT
RUBBER, FOOT PEDAL
ADJUSTER, DECK HANGER (61" Model Qty. 2)
BOLT, 3/8-16 X 1-1/4" GD5
WASHER, 1/2" SAE
BOLT, 1/2-13 X 3-1/2" GD5
WASHER 3/8" SAE (61" Model Qty. 10)
BOLT, 1/2-13 X 1-3/4 GD5 YZ
ADAPTER, CASTER AXLE

n

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21a
21b
22
23
24
25
26
27
28
29
30a
30b
31
32
33
34
35
36
37
38
39

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900816 (IS2000ZB3061 CAL)
5900811 (IS2000ZB3061)
5900945 (IS2000ZKAV2652)
5900810 (IS2000ZKAV2661)
5900809 (IS2000ZKAV2561)
5900817 (IS2000ZK2761)

5900839 (IS2000ZKAV25/52 AUS/NZ)
5900808 (IS2000ZKAV2761)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)
5900879 (IS2000ZKAV2661)
5900807 (IS2000ZKAV3461SS)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

61

5900838 (IS2000ZK2752)
5900840 (IS2000ZKAV2552)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900939 (IS2000ZKAV2652 ANSI EXP)

TP 400-7423-AC-2Z-F

Deck Lift Group - All 52" Models & 61" Models S/N: 2014341047 & Below

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900816 (IS2000ZB3061 CAL)
5900811 (IS2000ZB3061)
5900945 (IS2000ZKAV2652)
5900810 (IS2000ZKAV2661)
5900809 (IS2000ZKAV2561)
5900817 (IS2000ZK2761)

5900839 (IS2000ZKAV25/52 AUS/NZ)
5900808 (IS2000ZKAV2761)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)
5900879 (IS2000ZKAV2661)
5900807 (IS2000ZKAV3461SS)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

62

5900838 (IS2000ZK2752)
5900840 (IS2000ZKAV2552)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900939 (IS2000ZKAV2652 ANSI EXP)

TP 400-7423-AC-2Z-F

Deck Lift Group - All 52" Models & 61" Models S/N: 2014341047 & Below
PART NO.

QTY.

5025096
5025098
5100548
5025443
5401645B
5401645B
5020929
5025293
5401661B
5025128
5404307B
5025018X14
5025013X8
5010114
5100155
5400647B
5025158
5045856
5045447
5401662B
5100634
5025013X22
5403925A
5025034

3
4
6
6
1
2
1
2
1
4
1
4
4
2
2
2
2
2
2
1
4
4
2
2

DESCRIPTION
NUT, 3/8"-16 HEX NYLON LOCK (61" Model Qty. 4)
NUT, 1/2-20 HEX NYLON LOCK
WASHER, .390 X 1.50 X .109, YZ
BOLT, 3/8-16 x 3/4, GD5, YZ WITH PATCH
MOUNT, SPRING DECK LIFT - RED (52" Model Only)
MOUNT, SPRING DECK LIFT - RED (61" Model Only)
SHIM, 1.0 X 1.5 X .125 (52" Model Only)
WASHER, 3/8" GR9 FLAT
WELD, PIVOT DECK LIFT - LH - RED
NUT, 3/8-16 HEX SERRATED FLANGE
WELD, DECK LIFT SHAFT - RED
BOLT, 1/2-20 X 1-3/4" GD5 YZ
BOLT, 3/8-16 X 1" GD5 YZ
COLLAR, 3/4" SPLIT
SHAFT, DECK STABILIZER
WELD, DECK STABILIZER - RED
WASHER, 1/2" SAE
PIVOT, SPRING ROD (52" Model Only)
PIVOT, SPRING ROD (61" Model Only)
WELD, PIVOT DECK LIFT - RH - RED
PIVOT BLOCK, PLASTIC
BOLT, 3/8-16 X 2-3/4 GD5 YZ
PLATE, PIVOT BLOCK SUPPORT - BLK
NUT, 3/8-16 HEX

n

40
41
42
43
44a
44b
45
46
47
48
49
50
51
52
53
54
55
56a
56b
57
58
59
60
61

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900816 (IS2000ZB3061 CAL)
5900811 (IS2000ZB3061)
5900945 (IS2000ZKAV2652)
5900810 (IS2000ZKAV2661)
5900809 (IS2000ZKAV2561)
5900817 (IS2000ZK2761)

5900839 (IS2000ZKAV25/52 AUS/NZ)
5900808 (IS2000ZKAV2761)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)
5900879 (IS2000ZKAV2661)
5900807 (IS2000ZKAV3461SS)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

63

5900838 (IS2000ZK2752)
5900840 (IS2000ZKAV2552)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900939 (IS2000ZKAV2652 ANSI EXP)

TP 400-7423-AC-2Z-F

Deck Lift Group - 61" Models S/N: 2014341048 & Above

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900810 (IS2000ZKAV2661)
5900807 (IS2000ZKAV3461SS)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900816 (IS2000ZB3061 CAL)
5900813 (IS2000ZKAV25/61 AUS/NZ)

5900811 (IS2000ZB3061)
5900817 (IS2000ZK2761)
5900815 (IS2000ZKAV2561 CAL)
5900879 (IS2000ZKAV2661)
5900809 (IS2000ZKAV2561)
5900968 (IS2000ZB3061)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

5900808 (IS2000ZKAV2761)

64

TP 400-7423-AC-2Z-F

Deck Lift Group - 61" Models S/N: 2014341048 & Above
PART NO.

QTY.

5025394
5025212X7
5023343
5021811
5020095
5400719B
5021880
5020639
5025154
5025126
5025010X6
5023498
5025146X16
5400769B
5025203X6
5045178
5022434
5025089
5025017X22
5025056
5401664B
5401665B
5025040
5045447
5100149
5100148
5100247
5020441
5023355
5025100
5401671B
5401672B
5061569B
1715834
5100380
5025013X10
5025440
5025017X28
5025156
5025017X14
5025265X20

4
1
8
2
4
1
1
1
2
2
2
1
1
1
2
4
9
9
2
7
1
1
8
4
2
2
2
4
2
1
1
1
1
1
2
2
7
2
8
2
4

DESCRIPTION
NUT, 3/8-16 HEX NYLOCK FLANGE
PIN, CLEVIS, 1/4" x 7/8"
BUSHING, 1.00 X 1.13 X 1.38, PLASTIC
EYEBOLT, 3/2-16 X 8", 1" EYE
GREASE FITTING, 1/4-28 STRAIGHT
WELD, ROD DECK LIFT - RED
GRIP, FOAM
SPRING, EXTENSION
WASHER, 1/4" SAE
NUT, 1/4-20 HEX SERR. FLANGE
BOLT, 1/4-20 X 3/4" GD5 YZ
PIN, HITCH, 1/2 X 2.00 OAL, YP
BOLT, 3/8-16 X 2", CARRIAGE
WELD, DECK ADJUST LINK - RED
PIN, COTTER, 1/8" X 3/4
SPACER, .52 X 1.00 X .75
BALL JOINT, 1/2-20, MALE
NUT, 1/2-20 HEX JAM
BOLT, 1/2-13 X 2-3/4" GD5
NUT, 1/2-13 HEX NYLON LOCK
WELD, REAR LIFT - LH - RED
WELD, REAR LIFT - RH - RED (NOT SHOWN)
NUT, 5/8-11 HEX
PIVOT, SPRING ROD
ROD, DECK LIFT BENT
ROD, DECK LIFT, OUTER
ROD, 5/8-11 X 9.00
COLLAR, 5/8" SPLIT
SPRING, DECK LIFT ASSIST
NUT, 3/8-16 HEX SIDE LOCK
WELD, PIVOT DECK LIFT - LEFT - RED
WELD, PIVOT DECK LIFT - RIGHT - RED (NOT SHOWN)
PEDAL, FOOT
RUBBER, FOOT PEDAL
ADJUSTER, DECK HANGER
BOLT, 3/8-16 X 1-1/4" GD5
WASHER, 1/2" SAE
BOLT, 1/2-13 X 3-1/2" GD5
WASHER 3/8" SAE
BOLT, 1/2-13 X 1-3/4 GD5 YZ
BOLT, 3/4-16 X 2-1/2 YZ GD5

n

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21a
21b
22
23
24
25
26
27
28
29
30a
30b
31
32
33
34
35
36
37
38
39

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900810 (IS2000ZKAV2661)
5900807 (IS2000ZKAV3461SS)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900816 (IS2000ZB3061 CAL)
5900813 (IS2000ZKAV25/61 AUS/NZ)

5900811 (IS2000ZB3061)
5900817 (IS2000ZK2761)
5900815 (IS2000ZKAV2561 CAL)
5900879 (IS2000ZKAV2661)
5900809 (IS2000ZKAV2561)
5900968 (IS2000ZB3061)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

5900808 (IS2000ZKAV2761)

65

TP 400-7423-AC-2Z-F

Deck Lift Group - 61" Models S/N: 2014341048 & Above

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900810 (IS2000ZKAV2661)
5900807 (IS2000ZKAV3461SS)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900816 (IS2000ZB3061 CAL)
5900813 (IS2000ZKAV25/61 AUS/NZ)

5900811 (IS2000ZB3061)
5900817 (IS2000ZK2761)
5900815 (IS2000ZKAV2561 CAL)
5900879 (IS2000ZKAV2661)
5900809 (IS2000ZKAV2561)
5900968 (IS2000ZB3061)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

5900808 (IS2000ZKAV2761)

66

TP 400-7423-AC-2Z-F

Deck Lift Group - 61" Models S/N: 2014341048 & Above
QTY.

5025096
5022039
5100548
5025443
5401645B
5403925A
5025293
5401661B
5025128
5404307B
5025160
5025013X8
5025284
5025093
5406832B
5406837B
5025017X32
5401662B
5100634
5025013X22
5025034
5025332
5045176
5025017X16

4
4
6
6
2
2
2
1
4
1
4
4
4
4
2
1
1
1
4
4
2
1
1
1

DESCRIPTION
NUT, 3/8"-16 HEX NYLON LOCK
BALL JOINT, 3/4-16, MALE
WASHER, .390 X 1.50 X .109, YZ
BOLT, 3/8-16 x 3/4, GD5, YZ WITH PATCH
MOUNT, SPRING DECK LIFT - RED
PLATE, PIVOT BLOCK SUPPORT - BLK
WASHER, 3/8" GR9 FLAT
WELD, PIVOT DECK LIFT - LH - RED
NUT, 3/8-16 HEX SERRATED FLANGE
WELD, DECK LIFT SHAFT - RED
WASHER, 3/4 SAE
BOLT, 3/8-16 X 1" GD5 YZ
NUT, 3/4-16 HEX NYLON LOCK
NUT, 3/4-16 HEX JAM
WELD, DECK STABILIZER
WELD, DECK LIFT SHAFT - RED
BOLT, 1/2-13 X 4" GD5
WELD, PIVOT DECK LIFT - RH - RED
PIVOT BLOCK, PLASTIC
BOLT, 3/8-16 X 2-3/4 GD5 YZ
NUT, 3/8-16 HEX
NUT, 1/2-13 HEX SIDE LOCK
SPACER, .52 X 1.00 X 1.75
BOLT, 1/2-13 X 2" GD5

n

PART NO.

40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900810 (IS2000ZKAV2661)
5900807 (IS2000ZKAV3461SS)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900816 (IS2000ZB3061 CAL)
5900813 (IS2000ZKAV25/61 AUS/NZ)

5900811 (IS2000ZB3061)
5900817 (IS2000ZK2761)
5900815 (IS2000ZKAV2561 CAL)
5900879 (IS2000ZKAV2661)
5900809 (IS2000ZKAV2561)
5900968 (IS2000ZB3061)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

5900808 (IS2000ZKAV2761)

67

TP 400-7423-AC-2Z-F

Wheel & Tire Group

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900968 (IS2000ZB3061)
5900810 (IS2000ZKAV2661)
5900980 (IS2000ZB3061 ANSI EXP)
5900945 (IS2000ZKAV2652)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900838 (IS2000ZK2752)

5900811 (IS2000ZB3061)
5900879 (IS2000ZKAV2661)
5900817 (IS2000ZK2761)
5900816 (IS2000ZB3061 CAL)
5900808 (IS2000ZKAV2761)
5900807 (IS2000ZKAV3461SS)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

5900815 (IS2000ZKAV2561 CAL)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900809 (IS2000ZKAV2561)
5900814 (IS2000ZBV30/61 AUS/NZ)

68

TP 400-7423-AC-2Z-F

Wheel & Tire Group
REF NO

PART NO.

QTY.

5022631S
5023280
5022029X1
5022631SX1
5022631SX2
5022631SX3
5047103
5025017X64
5025396
5100006
5023369
5100006X1
5023369X2
5023369X1
5020601
5025158
5022631SX4

2
2
2
2
4
4
4
2
2
2
2
2
2
2
10
4
2

DESCRIPTION
TIRE, CASTER, 13 X 5.00-6 (Includes Ref No. 2 - 5 & 14)
* FLAT-FREE TIRE ASSEMBLY, 13 x 5.0 - 6 (Includes Ref No. 4 & 5)
TIRE, 13 x 5.0 - 6
WHEEL ASSEMBLY, for 13 x 5.0 - 6 Tire, Complete (Includes Ref No. 4 & 5)
BEARING, Tapered Roller (2 per tire)
GREASE SEAL (2 per tire)
ADAPTER, CASTER AXLE (2 per tire)
BOLT, 1/2-13 X 8" GD5 YZ
NUT, 1/2-13 HEX NYLOCK FLANGE
TIRE ASSM, 22 X 10.00-10 (52" model only. Includes Ref. Nos 10 and 11.)
TIRE ASSM, 22 X 11.00-10 (61" model only. Includes Ref. Nos 10 and 11.)
TIRE, 22 X 10.0 -10 (52" model only.)
TIRE, 22 X 11.0 - 10 (61" model only.)
RIM-10X7-5-4.5 SOLID
NUT, 1/2-20, FOR WHEEL BOLT SILVER
WASHER, 1/2" SAE
BEARING, RACE (SV) (Not Shown)

N
o
R tf
ep o
r
ro
du
ct
io

n

1a
1b
2
3
4
5
6
7
8
9a
9b
10a
10b
11
12
13
14

Footnotes
*Optional solid urethane tire assembly. Wheel is not servicable.
The above parts group applies to the following Mfg. Nos.:
5900968 (IS2000ZB3061)
5900810 (IS2000ZKAV2661)
5900980 (IS2000ZB3061 ANSI EXP)
5900945 (IS2000ZKAV2652)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900838 (IS2000ZK2752)

5900811 (IS2000ZB3061)
5900879 (IS2000ZKAV2661)
5900817 (IS2000ZK2761)
5900816 (IS2000ZB3061 CAL)
5900808 (IS2000ZKAV2761)
5900807 (IS2000ZKAV3461SS)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

5900815 (IS2000ZKAV2561 CAL)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900809 (IS2000ZKAV2561)
5900814 (IS2000ZBV30/61 AUS/NZ)

69

TP 400-7423-AC-2Z-F

Decals - Safety & Operation

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900811 (IS2000ZB3061)
5900968 (IS2000ZB3061)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900807 (IS2000ZKAV3461SS)
5900945 (IS2000ZKAV2652)
5900816 (IS2000ZB3061 CAL)

5900879 (IS2000ZKAV2661)
5900808 (IS2000ZKAV2761)
5900815 (IS2000ZKAV2561 CAL)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900817 (IS2000ZK2761)
5900839 (IS2000ZKAV25/52 AUS/NZ)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

70

5900838 (IS2000ZK2752)
5900810 (IS2000ZKAV2661)
5900809 (IS2000ZKAV2561)
5900840 (IS2000ZKAV2552)

TP 400-7423-AC-2Z-F

Decals - Safety & Operation
PART NO.
5100097
5101292
5100088
5100708
5100709
5100134
1725941
5102165
5100342
5061724
5100280
5048970
5048454
5046503
5100405
5100406
5100403
5100404
5100683
5100684

QTY.

DESCRIPTION

1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1

DECAL, MAIN SAFETY
DECAL, DANGER, MOWER DISCHARGE
DECAL, DANGER, MOWER
DECAL, DANGER, FIRE
DECAL, DANGER, FIRE (SP)
DECAL, WARNING, PINCH POINT
DECAL, CZT HYDRO RELEASE (Located under seat.)
DECAL, BELTS & BLADES, IS2000Z (Located under seat.)
DECAL, FUEL VALVE
DECAL, HEIGHT OF CUT
DECAL, THROTTLE CONTROL
DECAL, IGNITION SWITCH
DECAL, OIL RESERVOIR
DECAL, FUSE LOCATION
DECAL, WARNING
DECAL, WARNING (SP)
DECAL, WARNING
DECAL, WARNING (SP)
DECAL, WARNING, ROLL BAR (Located behind LH Roll bar post.)
DECAL, WARNING, ROLL BAR (SP) (Located behind RH Roll bar post.)

N
o
R tf
ep o
r
ro
du
ct
io

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

n

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900811 (IS2000ZB3061)
5900968 (IS2000ZB3061)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900807 (IS2000ZKAV3461SS)
5900945 (IS2000ZKAV2652)
5900816 (IS2000ZB3061 CAL)

5900879 (IS2000ZKAV2661)
5900808 (IS2000ZKAV2761)
5900815 (IS2000ZKAV2561 CAL)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900817 (IS2000ZK2761)
5900839 (IS2000ZKAV25/52 AUS/NZ)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

71

5900838 (IS2000ZK2752)
5900810 (IS2000ZKAV2661)
5900809 (IS2000ZKAV2561)
5900840 (IS2000ZKAV2552)

TP 400-7423-AC-2Z-F

Decals - Safety & Operation (Export Models)

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900939 (IS2000ZKAV2652 ANSI EXP)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

72

TP 400-7423-AC-2Z-F

Decals - Safety & Operation (Export Models)
REF NO

PART NO.

QTY.

5102627
5102165
5101990
5048970
5100280
5100342
5102420
5102457
5102628
5102456
5100685
5061246
5061724
5046503
5048454

1
1
1
1
1
1
2
1
1
1
2
1
1
1
1

DESCRIPTION
DECAL, MAIN SAFETY, ANSI CE
DECAL, BELT AND BLADE, IS2000Z (Located Under Seat)
DECAL, CZT HYRDO RELEASE (Located Under Seat)
DECAL, IGNITION SWITCH
DECAL, THROTTLE CONTROL
DECAL, FUEL VALVE
DECAL, DANGER, MOWER DECK, ANSI EXP
DECAL, DANGER DISCHARGE ANSI EXPORT
DECAL, PARKING BRAKE SYMBOLS
DECAL, FIRE ANSI EXPORT
DECAL, WARNING, ROLL BAR, CE
DECAL, PINCH POINT, CE
DECAL, HEIGHT CITATION
DECAL, FUSE LOCATION
DECAL, OIL RESEVOIR

N
o
R tf
ep o
r
ro
du
ct
io

n

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900939 (IS2000ZKAV2652 ANSI EXP)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

73

TP 400-7423-AC-2Z-F

Decals - Brand & Model

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900817 (IS2000ZK2761)
5900808 (IS2000ZKAV2761)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900809 (IS2000ZKAV2561)
5900879 (IS2000ZKAV2661)

5900838 (IS2000ZK2752)
5900810 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)
5900968 (IS2000ZB3061)
5900816 (IS2000ZB3061 CAL)
5900811 (IS2000ZB3061)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

5900939 (IS2000ZKAV2652 ANSI EXP)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)
5900840 (IS2000ZKAV2552)
5900807 (IS2000ZKAV3461SS)
5900980 (IS2000ZB3061 ANSI EXP)

74

TP 400-7423-AC-2Z-F

Decals - Brand & Model
REF NO

PART NO.
5100340
5100336
5100337
5101128
5022812
5022813
5100369
276636
5101127
5102210

QTY.

DESCRIPTION

1
1
1
1
1
1
1
1
1
1

DECAL, FERRIS, FRONT, 6.75 X 4.25
DECAL, BADGE, IS2000Z, LH
DECAL, BADGE, IS2000Z, RH
DECAL, 2000, BIG BLOCK, REAR (Briggs & Stratton Vanguard Models)
DECAL, 52 (52" Models)
DECAL, 61" (61" Models)
DECAL, FERRIS LOGO, 5-3/8"
LABEL, BRIGGS & STRATTON LOGO (Briggs & Stratton Vanguard Models)
DECAL, 2000, BIG BLOCK, FRONT (Briggs & Stratton Vanguard Models)
DECAL, iCD CUTTING SYSTEM

N
o
R tf
ep o
r
ro
du
ct
io

n

1
2
3
4
5
6
7
8
9
10

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900817 (IS2000ZK2761)
5900808 (IS2000ZKAV2761)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900809 (IS2000ZKAV2561)
5900879 (IS2000ZKAV2661)

5900838 (IS2000ZK2752)
5900810 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)
5900968 (IS2000ZB3061)
5900816 (IS2000ZB3061 CAL)
5900811 (IS2000ZB3061)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

5900939 (IS2000ZKAV2652 ANSI EXP)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)
5900840 (IS2000ZKAV2552)
5900807 (IS2000ZKAV3461SS)
5900980 (IS2000ZB3061 ANSI EXP)

75

TP 400-7423-AC-2Z-F

Evap Canister Group

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900879 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900968 (IS2000ZB3061)
5900840 (IS2000ZKAV2552)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

76

TP 400-7423-AC-2Z-F

Evap Canister Group
REF NO

PART NO.

QTY.

313036
5103055
5025299X6
5025391
5103062
7700552X10P5
7700552X11
7700552X32
7700552X15
7700552X21P5
-1752800

2
4
4
4
1
2
1
1
1
1
1
2

DESCRIPTION
CNSTR, CARB, 6 GAL
CLAMP, 3" ID, CUSHIONED, STAINLESS
BOLT, 1/4-20 X 3/4, ALLEN BUTTON HD, YZ
NUT, 1/4-20 HEX NYLOCK FLANGE
FITTING, 3/16" TEE, BARB TYPE, HDPE
HOSE, VAPOR, 5MM ID, 10.50 LG
HOSE, VAPOR, 5MM ID, 11.00 LG
HOSE, VAPOR, 5MM ID, 32.00 LG (Kawasaki Models)
HOSE, VAPOR, 5MM ID, 15.00 LG (Briggs & Stratton Models)
HOSE, VAPOR, 5MM ID, 21.50 LG
DECAL, EPA CERT, ZTRS (Located on frame near Serial Tag)
DUST FILTER, CANISTER

N
o
R tf
ep o
r
ro
du
ct
io

n

1
2
3
4
5
6
7
8a
8b
9
10
11

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900879 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900968 (IS2000ZB3061)
5900840 (IS2000ZKAV2552)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

77

TP 400-7423-AC-2Z-F

52" & 61" Mower Deck - Hanger Chains

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900809 (IS2000ZKAV2561)
5900838 (IS2000ZK2752)
5900810 (IS2000ZKAV2661)
5900840 (IS2000ZKAV2552)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900808 (IS2000ZKAV2761)

5900968 (IS2000ZB3061)
5900807 (IS2000ZKAV3461SS)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900816 (IS2000ZB3061 CAL)
5900980 (IS2000ZB3061 ANSI EXP)
5900811 (IS2000ZB3061)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

78

5900815 (IS2000ZKAV2561 CAL)
5900879 (IS2000ZKAV2661)
5900817 (IS2000ZK2761)
5900945 (IS2000ZKAV2652)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900813 (IS2000ZKAV25/61 AUS/NZ)

TP 400-7423-AC-2Z-F

52" & 61" Mower Deck - Hanger Chains
PART NO.

QTY.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

5050878X3
5045026
5025013X14
5025156
5025128
5025100
5025158
5025038
5025396
5025203X6
5050878X4
5025055X16
5025032
5100375
5025013X16
5025084
5025214X9

2
2
6
12
8
4
2
2
2
2
2
2
2
2
2
2
2

DESCRIPTION
CHAIN, 5/16 GD30, 3 LINKS
HANGER, FRONT DECK - 4 LINK
BOLT, 3/8-16 X 1-3/4 GD5
WASHER, 3/8 SAE (Qty: 12 - 61" Models; Qty: 16 - 52" Models)
NUT, 3/8-16 HEX SERRATED FLANGE
NUT, 3/8-16 HEX SIDE LOCK
WASHER, 1/2 SAE
NUT, 1/2-13 HEX
NUT, 1/2-13 HEX NYLOCK FLANGE
PIN, COTTER, 1/8 X 3/4
CHAIN, 5/16" GD30, 4 LINKS
BOLT, 5/16-18 X 2 GD5 TFL
NUT, 5/16-18 HEX
CLEVIS, 5/16-18, 3/8 PIN HOLE
BOLT, 3/8-16 X 2 GD5 YZ
NUT, 3/8-16 HEX JAM
PIN, CLEVIS, 3/8 X 1-1/8

N
o
R tf
ep o
r
ro
du
ct
io

n

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900809 (IS2000ZKAV2561)
5900838 (IS2000ZK2752)
5900810 (IS2000ZKAV2661)
5900840 (IS2000ZKAV2552)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900808 (IS2000ZKAV2761)

5900968 (IS2000ZB3061)
5900807 (IS2000ZKAV3461SS)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900816 (IS2000ZB3061 CAL)
5900980 (IS2000ZB3061 ANSI EXP)
5900811 (IS2000ZB3061)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

79

5900815 (IS2000ZKAV2561 CAL)
5900879 (IS2000ZKAV2661)
5900817 (IS2000ZK2761)
5900945 (IS2000ZKAV2652)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900813 (IS2000ZKAV25/61 AUS/NZ)

TP 400-7423-AC-2Z-F

61" Mower Deck Group - Housing, Covers, Spindles & Blades

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900816 (IS2000ZB3061 CAL)
5900807 (IS2000ZKAV3461SS)
5900968 (IS2000ZB3061)
5900810 (IS2000ZKAV2661)
5900879 (IS2000ZKAV2661)

5900813 (IS2000ZKAV25/61 AUS/NZ)
5900817 (IS2000ZK2761)
5900808 (IS2000ZKAV2761)
5900815 (IS2000ZKAV2561 CAL)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900809 (IS2000ZKAV2561)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

80

5900811 (IS2000ZB3061)

TP 400-7423-AC-2Z-F

61" Mower Deck Group - Housing, Covers, Spindles & Blades
QTY.

5600432
5600291
5600289
5404834
5404716B
5404718A
5025394
5025390X8
5025045
5061300
5400791B
5405484B
5025392
5025411
5025477
5022308
5025292
5025011X6
5100993
5025013X12
5101755S
5025320X14
5025145X6
5401344A
5101005
5408810B
5025156
5102036
5405322A
5025011X8
5025498

1
1
1
1
1
1
25
18
2
1
1
1
9
1
3
6
6
6
3
7
1
3
2
1
1
1
4
1
1
6
2

DESCRIPTION
DECK SHELL W/DECALS, 61" SIDE DISCHARGE (S/N: 2014341048 & Above)
DECK SHELL W/DECALS, 61" SIDE DISCHARGE (S/N: 2014341047 & Below)
KIT, DISCHARGE CHUTE 61" (Includes Ref No. 3 - 7)
CHUTE, DISCHARGE, RUBBER, 61/72"
WELD, FRAME, CHUTE, 61 - RED
SUPPORT, DISCHARGE CHUTE - BLK
NUT, 3/8-16 HEX NYLOCK FLANGE
BOLT, 3/8-16 X 1, FLANGE, GD 5, CZ
NUT, 5/16-24 HEX NYLON LOCK
ROD MOUNT, CHUTE 61"
GUARD, 61", RH - RED
GUARD, 61" - LH - RED
NUT, 5/16-18 HEX NYLOCK FLANGE
BOLT, 5/16-18 X 3/4" FLANGE
WASHER, 5/8" GRADE 8, YZ
BODY CLIP, 5/16-18 X 1/2" DEEP
WASHER, 5/16" GD.9 FLAT
BOLT, 5/16-18 X 3/4" GD5
ASSM, SPINDLE, CAST IRON
BOLT, 3/8-16 X 1 1/2"
BLADE, 21" SET OF THREE (Set of three blades).
BOLT, 5/8-11 X 1-3/4" GD8
BOLT, 5/16-18 X 3/4, CARRIAGE
PLATE, DEFLECTOR - BLK
SAFETY WALK, 9.75 X 6.00
PLATE, BRACKET, ANTI SCALP - RED
WASHER, 3/8 SAE
FLAP, STRIPER, 61 DECK
PLATE, SUPPORT - BLK
BOLT, 5/16-18 X 1" GD5
5/16 PUSH-ON NUT RETAINER, STL, CZ

n

PART NO.

1a
1b
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900816 (IS2000ZB3061 CAL)
5900807 (IS2000ZKAV3461SS)
5900968 (IS2000ZB3061)
5900810 (IS2000ZKAV2661)
5900879 (IS2000ZKAV2661)

5900813 (IS2000ZKAV25/61 AUS/NZ)
5900817 (IS2000ZK2761)
5900808 (IS2000ZKAV2761)
5900815 (IS2000ZKAV2561 CAL)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900809 (IS2000ZKAV2561)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

81

5900811 (IS2000ZB3061)

TP 400-7423-AC-2Z-F

61" Mower Deck - Pulleys, Belts & Idler Arm

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900817 (IS2000ZK2761)
5900808 (IS2000ZKAV2761)
5900811 (IS2000ZB3061)
5900810 (IS2000ZKAV2661)
5900879 (IS2000ZKAV2661)

5900809 (IS2000ZKAV2561)
5900968 (IS2000ZB3061)
5900816 (IS2000ZB3061 CAL)
5900815 (IS2000ZKAV2561 CAL)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900980 (IS2000ZB3061 ANSI EXP)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

82

5900807 (IS2000ZKAV3461SS)

TP 400-7423-AC-2Z-F

61" Mower Deck - Pulleys, Belts & Idler Arm
PART NO.

QTY.

5103391
5025017X36
5025150
5045022
5021541
5600459
5045106A
5025396
5025405
5600184
5025440
5025017X24
5020095
5021812
5025417
5025084
5044609
5023340
5101103
5050407X10
5025406
5046434A
5100700
5025394
5102678
5600184
5101162

1
1
3
1
2
1
1
5
3
3
4
4
1
1
1
1
2
1
4
3
3
3
3
1
1
1
1

DESCRIPTION
BELT, 5V-SEC, 175.90, LG ARAMID, WRPD
BOLT, 1/2-13 X 4-1/2" GD5
WASHER, 1/2" USSZ
SPACER, .52 X 1.00 X 3.50
BUSHING, FLANGE
IDLER ARM ASSM (Serial No. 201484330 & Above)
ASSM, IDLER ARM - BLK - 5401621A (SV) (Serial No. 201484329 & Below)
NUT, 1/2-13 HEX NYLOCK FLANGE
NUT, 3/4-16 HEX
KIT, PULLEY & SHIELD
WASHER, 1/2" GD9 YZ
BOLT, 1/2-13 X 3" GD5
GREASE FITTING, 1/4-28 STRAIGHT
EYE BOLT, 3/8-16 X 6, 3.0 THREAD (Serial No. 201484330 & Above)
EYE BOLT, 3/8-16 X 1-1/2 (Serial No. 201484329 & Below)
NUT, 3/8-16 HEX JAM
SPACER, .52 X 1.00 X .38
SPRING, EXTENSION, SWIVEL END
SHIELD, PULLEY BEARING
KEY, 1/4" SQ. X 1-1/4
WASHER, 3/4" BELLEVILLE
WELD, MOUNT, IDLER - BLK
PULLEY, 6.93 EOD X 25MM, SPLIT
NUT, 3/8-16 HEX NYLOCK FLANGE
PULLEY, DEEP V-IDLER, 6.25"OD X 1/2"ID (Serial No. 201484330 & Above)
KIT, PULLEY & SHIELD (SV) (Serial No. 201484329 & Below)
SPACER, .52 X 1.00 X .56, CZ (Serial No. 201484330 & Above)

n

1
2
3
4
5
6a
6b
7
8
9
10
11
12
13a
13b
14
15
16
17
18
19
20
21
22
23a
23b
24

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900817 (IS2000ZK2761)
5900808 (IS2000ZKAV2761)
5900811 (IS2000ZB3061)
5900810 (IS2000ZKAV2661)
5900879 (IS2000ZKAV2661)

5900809 (IS2000ZKAV2561)
5900968 (IS2000ZB3061)
5900816 (IS2000ZB3061 CAL)
5900815 (IS2000ZKAV2561 CAL)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900980 (IS2000ZB3061 ANSI EXP)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

83

5900807 (IS2000ZKAV3461SS)

TP 400-7423-AC-2Z-F

52" & 61" Mower Deck - Rollers & Casters

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900809 (IS2000ZKAV2561)
5900815 (IS2000ZKAV2561 CAL)
5900879 (IS2000ZKAV2661)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900807 (IS2000ZKAV3461SS)
5900814 (IS2000ZBV30/61 AUS/NZ)

5900816 (IS2000ZB3061 CAL)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900808 (IS2000ZKAV2761)
5900838 (IS2000ZK2752)
5900817 (IS2000ZK2761)
5900980 (IS2000ZB3061 ANSI EXP)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

84

5900810 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)
5900840 (IS2000ZKAV2552)
5900811 (IS2000ZB3061)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900968 (IS2000ZB3061)

TP 400-7423-AC-2Z-F

52" & 61" Mower Deck - Rollers & Casters
PART NO.

QTY.

1
2
2
3
4
5
6
7
8
9

1714760
5025440
5025158
5046586
5025100
5025013X24
5025156
5041931
5047027
5025013X48

6
6
6
2
4
2
4
4
2
2

DESCRIPTION
GAUGE WHEEL
WASHER, 1/2" GD9 YZ (61" Models Only)
WASHER, 1/2 SAE (52" Models Only)
SPACER, .38 X .50 X 5.06
NUT, 3/8-16 HEX SIDE LOCK
BOLT, 3/8-16 X 3" GD5
WASHER 3/8" SAE
SPACER, .38 X .50 X 1.25
SPACER, .51 X .75 X .56
BOLT, 3/8-16 X 6" GR5 YZ

N
o
R tf
ep o
r
ro
du
ct
io

n

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900809 (IS2000ZKAV2561)
5900815 (IS2000ZKAV2561 CAL)
5900879 (IS2000ZKAV2661)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900807 (IS2000ZKAV3461SS)
5900814 (IS2000ZBV30/61 AUS/NZ)

5900816 (IS2000ZB3061 CAL)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900808 (IS2000ZKAV2761)
5900838 (IS2000ZK2752)
5900817 (IS2000ZK2761)
5900980 (IS2000ZB3061 ANSI EXP)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

85

5900810 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)
5900840 (IS2000ZKAV2552)
5900811 (IS2000ZB3061)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900968 (IS2000ZB3061)

TP 400-7423-AC-2Z-F

52" Mower Deck - Housing, Covers, Spindles & Blades

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900838 (IS2000ZK2752)
5900945 (IS2000ZKAV2652)
5900840 (IS2000ZKAV2552)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

86

TP 400-7423-AC-2Z-F

52" Mower Deck - Housing, Covers, Spindles & Blades
QTY.

5405557A
5061095
5402360A
5061293B
5101756S
5025477
5025320X14
5023156
5025394
5022308
5405604B
5401605B
5025155
5025011X6
5025145X6
5025392
5061300
5025045
5025411
5025013X12
5101004
5402403
5600335
5025392
5408810B
5025013X12
5025394
5025156
5405238A
5102015
5025011X8
5025498
5600086

1
3
1
1
3
3
3
12
3
6
1
1
8
6
2
15
1
2
1
3
1
1
1
6
1
4
4
4
1
1
6
2
1

DESCRIPTION
PLATE, DEFLECTOR, 52" - BLK
ASSM, SPINDLE, LOW PROFILE
SUPPORT, DISCHARGE CHUTE - BLK
WELD, FRAME, CHUTE, 61 - RED
BLADE, 18 X .25 X 2.5, 1 X 3.5 (SET OF THREE)
WASHER, 5/8 GRADE 8, YZ
BOLT, 5/8-11 X 1-3/4 GD8
BOLT, 5/16-18 X 1 1/4 FLANGE
NUT, 3/8-16 HEX NYLOCK FLANGE
BODY CLIP, 5/16-18-7GA MATERIAL
GUARD, 52" DECK, IS2000, RH - RED
GUARD, 52" DECK, IS2000 - LH - RED
WASHER, 5/16 SAE
BOLT, 5/16-18 X 3/4 GD5
BOLT, 5/16-18 X 3/4, CARRIAGE
NUT, 5/16-18 HEX NYLOCK FLANGE
ROD MOUNT, CHUTE 61"
NUT, 5/16-24 HEX NYLON LOCK
BOLT, 5/16-18 X 3/4 FLANGE
BOLT, 3/8-16 X 1-1/2 GD5 YZ
SAFETY WALK, 4.00 X 7.50
CHUTE, DISCHARGE, BEND, RUBBER
DECK SHELL W/ DECALS, 52-SD - RED
NUT, 5/16-18 HEX NYLOCK FLANGE
PLATE, BRACKET, ANTI SCALP - RED
BOLT, 3/8-16 X 1-1/2 GD5 YZ
NUT, 3/8-16 HEX NYLOCK FLANGE
WASHER, 3/8 SAE
PLATE, SUPPORT - BLK
FLAP, STRIPER, 52 DECK
BOLT, 5/16-18 X 1 GD5 YZ
5/16 PUSH-ON NUT RETAINER, STL, CZ
KIT, DISCHARGE CHUTE - RED

n

PART NO.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900939 (IS2000ZKAV2652 ANSI EXP)
5900838 (IS2000ZK2752)
5900945 (IS2000ZKAV2652)
5900840 (IS2000ZKAV2552)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

87

TP 400-7423-AC-2Z-F

52" Mower Deck - Pulleys, Belts & Idler Arm

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900939 (IS2000ZKAV2652 ANSI EXP)
5900945 (IS2000ZKAV2652)
5900840 (IS2000ZKAV2552)
5900838 (IS2000ZK2752)
5900839 (IS2000ZKAV25/52 AUS/NZ)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

88

TP 400-7423-AC-2Z-F

52" Mower Deck - Pulleys, Belts & Idler Arm
QTY.

5103395
5102831
5101351
5403134A
5020095
5021541
5045022
5047142
5050407X10
5025150
5025017X40
5025396
5025405
5023340
5025158
5025017X26
5045023
5025017X20
5100520
5101103
5046434A
5021812
5025034

1
3
3
1
1
2
1
1
3
2
1
4
3
1
1
1
2
2
1
3
1
1
2

DESCRIPTION
BELT, 5V-SEC, 163.40EL, LG ARAMID, WRPD
PULLEY, IDLER, 6-3/4"
PULLEY, 5.926 OVER BALL
WELD, IDLER ARM - BLK
GREASE FITTING, 1/4-28 STRAIGHT
BUSHING, FLANGE
SPACER, .52 X 1.00 X 3.50
SPACER, .52 X 1.25 X .70, CZ
KEY, 1/4 SQ X 1-1/4
WASHER, 1/2 USS
BOLT-1/2-13 X 5 GD5 YZ
NUT, 1/2-13 HEX NYLOCK FLANGE
NUT, 3/4-16 HEX
SPRING-EXT, 1.04 ODX10.535LGX.148WR, BLK
WASHER, 1/2 SAE
BOLT, 1/2-13 X 3-1/4 GD5 YZ
SPACER, .52 X 1.00 X .44, CZ
BOLT, 1/2-13 X 2-1/2 GD5 YZ
SPACER, .52 X 1.00 X .22, CZ
SHIELD, PULLEY BEARING
WELD, MOUNT, IDLER - BLK
EYE BOLT, 3/8-16 X 6, 3.0 THREAD
NUT, 3/8-16 HEX

n

PART NO.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23

N
o
R tf
ep o
r
ro
du
ct
io

REF NO

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900939 (IS2000ZKAV2652 ANSI EXP)
5900945 (IS2000ZKAV2652)
5900840 (IS2000ZKAV2552)
5900838 (IS2000ZK2752)
5900839 (IS2000ZKAV25/52 AUS/NZ)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

89

TP 400-7423-AC-2Z-F

Spindle Service Parts (5061095)

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900939 (IS2000ZKAV2652 ANSI EXP)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900840 (IS2000ZKAV2552)
5900945 (IS2000ZKAV2652)
5900838 (IS2000ZK2752)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

90

TP 400-7423-AC-2Z-F

Spindle Service Parts (5061095)
REF NO

PART NO.

QTY.

5061095
5023329
5025405
5025406
5049793
5023330
5023296
5061097
5061099
5061098

3
3
3
3
6
6
3
3
3
3

DESCRIPTION
ASSM, SPINDLE, LOW PROFILE (Includes Ref No. 2 - 10)
GREASE FITTING
NUT, 3/4-16 HEX
WASHER, 3/4" BELLEVILLE
TRASH SHIELD
BEARING
RELIEF VALVE
SPINDLE HOUSING
SPACER, 1.00 x 1.25 x 1.75
SPINDLE SHAFT

N
o
R tf
ep o
r
ro
du
ct
io

n

1
2
3
4
5
6
7
8
9
10

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900939 (IS2000ZKAV2652 ANSI EXP)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900840 (IS2000ZKAV2552)
5900945 (IS2000ZKAV2652)
5900838 (IS2000ZK2752)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

91

TP 400-7423-AC-2Z-F

Spindle Service Parts (5100993)

N
o
R tf
ep o
r
ro
du
ct
io

n

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

The above parts group applies to the following Mfg. Nos.:
5900815 (IS2000ZKAV2561 CAL)
5900879 (IS2000ZKAV2661)
5900816 (IS2000ZB3061 CAL)
5900968 (IS2000ZB3061)
5900817 (IS2000ZK2761)
5900814 (IS2000ZBV30/61 AUS/NZ)

5900813 (IS2000ZKAV25/61 AUS/NZ)
5900811 (IS2000ZB3061)
5900810 (IS2000ZKAV2661)
5900809 (IS2000ZKAV2561)
5900808 (IS2000ZKAV2761)
5900807 (IS2000ZKAV3461SS)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

92

TP 400-7423-AC-2Z-F

Spindle Service Parts (5100993)
REF NO

PART NO.
5023329
5049793
5023330
5023296
5101048
5061099
5061098
5100993

QTY.

DESCRIPTION

1
2
2
1
1
1
1
1

FITTING
SHIELD, TRASH
BEARING, .98 X 2.44 X .67
FITTING, RELIEF, 1-5 PSI
HOUSING, SPINDLE, BOTTOM MOUNT SM
SPACER
SHAFT, SPINDLE
SPINDLE ASSM, CAST IRON 8.0-6 BOLT (Includes Ref No. 1 - 7)

N
o
R tf
ep o
r
ro
du
ct
io

n

1
2
3
4
5
6
7
8

Footnotes

The above parts group applies to the following Mfg. Nos.:
5900815 (IS2000ZKAV2561 CAL)
5900879 (IS2000ZKAV2661)
5900816 (IS2000ZB3061 CAL)
5900968 (IS2000ZB3061)
5900817 (IS2000ZK2761)
5900814 (IS2000ZBV30/61 AUS/NZ)

5900813 (IS2000ZKAV25/61 AUS/NZ)
5900811 (IS2000ZB3061)
5900810 (IS2000ZKAV2661)
5900809 (IS2000ZKAV2561)
5900808 (IS2000ZKAV2761)
5900807 (IS2000ZKAV3461SS)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

93

TP 400-7423-AC-2Z-F

Electrical Schematic - Charging Circuit - 26HP Kawasaki LC

N
o
R tf
ep o
r
ro
du
ct
io

n

278eswc1

The above parts group applies to the following Mfg. Nos.:
5900810 (IS2000ZKAV2661)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

94

TP 400-7423-AC-2Z-F

Electrical Schematic - Cranking Circuit - 26HP Kawasaki LC

N
o
R tf
ep o
r
ro
du
ct
io

n

278eswr1

The above parts group applies to the following Mfg. Nos.:
5900810 (IS2000ZKAV2661)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

95

TP 400-7423-AC-2Z-F

Electrical Schematic - Ignition Grounding Circuit/Operator Presence - 26HP Kawasaki LC

N
o
R tf
ep o
r
ro
du
ct
io

n

278eswi1

The above parts group applies to the following Mfg. Nos.:
5900810 (IS2000ZKAV2661)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

96

TP 400-7423-AC-2Z-F

Electrical Schematic - PTO Clutch Circuit - 26HP Kawasaki LC

N
o
R tf
ep o
r
ro
du
ct
io

n

278eswp1

The above parts group applies to the following Mfg. Nos.:
5900810 (IS2000ZKAV2661)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

97

TP 400-7423-AC-2Z-F

Electrical Schematic - Charging Circuit - 30HP Briggs & Stratton

N
o
R tf
ep o
r
ro
du
ct
io

n

278esbc0

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900811 (IS2000ZB3061)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900816 (IS2000ZB3061 CAL)
5900968 (IS2000ZB3061)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

98

TP 400-7423-AC-2Z-F

Electrical Schematic - Cranking Circuit - 30HP Briggs & Stratton

N
o
R tf
ep o
r
ro
du
ct
io

n

278esbr0

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900811 (IS2000ZB3061)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900816 (IS2000ZB3061 CAL)
5900968 (IS2000ZB3061)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

99

TP 400-7423-AC-2Z-F

Electrical Schematic - Ignition Grounding Circuit/Operator Presence - 30HP Briggs &
278esbi0

N
o
R tf
ep o
r
ro
du
ct
io

n

Stratton

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900811 (IS2000ZB3061)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900816 (IS2000ZB3061 CAL)
5900968 (IS2000ZB3061)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

100

TP 400-7423-AC-2Z-F

Electrical Schematic - PTO Clutch Circuit - 30HP Briggs & Stratton

N
o
R tf
ep o
r
ro
du
ct
io

n

278esbp0

The above parts group applies to the following Mfg. Nos.:
5900980 (IS2000ZB3061 ANSI EXP)
5900811 (IS2000ZB3061)
5900814 (IS2000ZBV30/61 AUS/NZ)
5900816 (IS2000ZB3061 CAL)
5900968 (IS2000ZB3061)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

101

TP 400-7423-AC-2Z-F

Electrical Schematic - Charging Circuit - Kawasaki

N
o
R tf
ep o
r
ro
du
ct
io

n

278eswc3

The above parts group applies to the following Mfg. Nos.:
5900807 (IS2000ZKAV3461SS)
5900808 (IS2000ZKAV2761)
5900879 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)
5900939 (IS2000ZKAV2652 ANSI EXP)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

102

TP 400-7423-AC-2Z-F

Electrical Schematic - Cranking Circuit - Kawasaki

N
o
R tf
ep o
r
ro
du
ct
io

n

278eswr3

The above parts group applies to the following Mfg. Nos.:
5900807 (IS2000ZKAV3461SS)
5900808 (IS2000ZKAV2761)
5900879 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)
5900939 (IS2000ZKAV2652 ANSI EXP)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

103

TP 400-7423-AC-2Z-F

Electrical Schematic - Ignition Grounding Circuit/Operator Presence - Kawasaki

N
o
R tf
ep o
r
ro
du
ct
io

n

278eswi3

The above parts group applies to the following Mfg. Nos.:
5900807 (IS2000ZKAV3461SS)
5900808 (IS2000ZKAV2761)
5900879 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)
5900939 (IS2000ZKAV2652 ANSI EXP)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

104

TP 400-7423-AC-2Z-F

Electrical Schematic - PTO Clutch Circuit - Kawasaki

N
o
R tf
ep o
r
ro
du
ct
io

n

278eswp3

The above parts group applies to the following Mfg. Nos.:
5900807 (IS2000ZKAV3461SS)
5900808 (IS2000ZKAV2761)
5900879 (IS2000ZKAV2661)
5900945 (IS2000ZKAV2652)
5900939 (IS2000ZKAV2652 ANSI EXP)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

105

TP 400-7423-AC-2Z-F

Electrical Schematic - Charging Circuit - 25HP Kawasaki

N
o
R tf
ep o
r
ro
du
ct
io

n

423eswc2

The above parts group applies to the following Mfg. Nos.:
5900809 (IS2000ZKAV2561)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900840 (IS2000ZKAV2552)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

106

TP 400-7423-AC-2Z-F

Electrical Schematic - Cranking Circuit - 25HP Kawasaki

N
o
R tf
ep o
r
ro
du
ct
io

n

423eswr2

The above parts group applies to the following Mfg. Nos.:
5900809 (IS2000ZKAV2561)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900840 (IS2000ZKAV2552)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

107

TP 400-7423-AC-2Z-F

Electrical Schematic - Ignition Grounding Circuit/Operator Presence - 25HP Kawasaki

N
o
R tf
ep o
r
ro
du
ct
io

n

423eswi2

The above parts group applies to the following Mfg. Nos.:
5900809 (IS2000ZKAV2561)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900840 (IS2000ZKAV2552)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

108

TP 400-7423-AC-2Z-F

Electrical Schematic - PTO Clutch Circuit - 25HP Kawasaki

N
o
R tf
ep o
r
ro
du
ct
io

n

423eswp2

The above parts group applies to the following Mfg. Nos.:
5900809 (IS2000ZKAV2561)
5900813 (IS2000ZKAV25/61 AUS/NZ)
5900815 (IS2000ZKAV2561 CAL)
5900839 (IS2000ZKAV25/52 AUS/NZ)
5900840 (IS2000ZKAV2552)
© Copyright 2011 Briggs and Stratton. All Rights Reserved.

109

TP 400-7423-AC-2Z-F

Electrical Schematic - Charging Circuit - 27HP Kohler

N
o
R tf
ep o
r
ro
du
ct
io

n

423eskc1

The above parts group applies to the following Mfg. Nos.:
5900817 (IS2000ZK2761)
5900838 (IS2000ZK2752)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

110

TP 400-7423-AC-2Z-F

Electrical Schematic - Cranking Circuit - 27HP Kohler

N
o
R tf
ep o
r
ro
du
ct
io

n

423eskr1

The above parts group applies to the following Mfg. Nos.:
5900817 (IS2000ZK2761)
5900838 (IS2000ZK2752)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

111

TP 400-7423-AC-2Z-F

Electrical Schematic - Ignition Grounding Circuit/Operator Presence - 27HP Kohler

N
o
R tf
ep o
r
ro
du
ct
io

n

423eski1

The above parts group applies to the following Mfg. Nos.:
5900817 (IS2000ZK2761)
5900838 (IS2000ZK2752)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

112

TP 400-7423-AC-2Z-F

Electrical Schematic - PTO Clutch Circuit - 27HP Kohler

N
o
R tf
ep o
r
ro
du
ct
io

n

423eskp1

The above parts group applies to the following Mfg. Nos.:
5900817 (IS2000ZK2761)
5900838 (IS2000ZK2752)

© Copyright 2011 Briggs and Stratton. All Rights Reserved.

113

TP 400-7423-AC-2Z-F

n

N
o
R tf
ep o
r
ro
du
ct
io

Notes

Hardware Identification & Torque Specifications
Common Hardware Types

Torque Specification Chart

Hex Head Capscrew

FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

Washer

Hardware
Grade

Lockwasher
Carriage Bolt

No
Marks

SAE Grade 2

Size Of
Hardware

Standard Hardware Sizing

8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-12

When a washer or nut is identified as 1/2”, this is the
Nominal size, meaning the inside diameter is 1/2 inch; if a
second number is present it represent the threads per inch
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the Nominal size, or body diameter is 1/2 inch; the
second number represents the threads per inch (16 in this
example, and the final number is the body length of the
bolt or screw (in this example 2 inches long).

19
20
27
31
66
76
11
12
20
23
30
35
50
55
65
75
90
100
160
180
140
155
220
240

in/lbs
ft/lbs

Nm.
2.1
2.3
3.1
3.5
7.6
8.6
15.0
16.3
27.2
31.3
40.8
47.6
68.0
74.8
88.4
102.0
122.4
136
217.6
244.8
190.4
210.8
299.2
326.4

0

N
o
R tf
ep o
r
ro
du
ct
io

The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.

in/lbs
ft/lbs

SAE Grade 5

1/4

Nut, 1/2”

1/2

Inside
Diameter

3/4

1
1/4
1/2
3/4

Screw, 1/2 x 2
2

1/4

Body
Diameter

30
31
43
49
8
10
17
19
30
35
50
55
75
90
110
120
150
180
260
300
400
440
580
640

n

Hex Nut

SAE Grade 8

Nm.

in/lbs
ft/lbs

Nm.

3.4
3.5
4.9
5.5
10.9
13.6
23.1
25.8
40.8
47.6
68.0
74.8
102.0
122.4
149.6
163.2
204.0
244.8
353.6
408.0
544.0
598.4
788.8
870.4

41
43
60
68
12
14
25
27
45
50
70
80
110
120
150
170
220
240
386
420
600
660
900
1,000

4.6
4.9
6.8
7.7
16.3
19.0
34.0
34.0
61.2
68.0
95.2
108.8
149.6
163.2
204.0
231.2
299.2
326.4
525.0
571.2
816.0
897.6
1,244.0
1,360.0

NOTES

1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.

1/2

Body
Length

3/4

3
1/4
1/2
3/4

4

Wrench & Fastener Size Guide
1/4

5/16

3/8

1/4” Bolt or Nut
Wrench—7/16”

5/16” Bolt or Nut
Wrench—1/2”

3/8” Bolt or Nut
Wrench—9/16”

7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”

1/2
DIA.

1/2” Bolt or Nut
Wrench—3/4”

Parts
Manual
IS2000Z Series

N
o
R tf
ep o
r
ro
du
ct
io

n

Zero-Turn Riding Mower

IT IS THE POLICY OF BRIGGS STRATTON TO IMPROVE ITS PRODUCTS WHENEVER IT
IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE
CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY
OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED

Briggs and Stratton Power Products Group, LLC.
5375 North Main Street
Munnsville, NY 13409 USA
800-933-6175
www.ferrisindustries.com
© Copyright 2011 Briggs and Stratton Corporation
All Rights Reserved. Printed In USA.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Annotate, Fill forms, Extract, Print high-res
Author                          : 45978
Create Date                     : 2011:11:01 10:20:26-04:00
Modify Date                     : 2011:11:01 10:28:55-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2011:11:01 10:28:55-04:00
Format                          : application/pdf
Title                           : PartsManual
Creator                         : 45978
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Document ID                     : uuid:9df48254-3625-44b8-b56b-5425f5c7392f
Instance ID                     : uuid:1e31434e-6451-479b-a318-80bbbf444d20
Page Layout                     : TwoColumnRight
Page Mode                       : UseThumbs
Page Count                      : 116
EXIF Metadata provided by EXIF.tools

Navigation menu