LEDEEN Di M Series Electric Actuator Brochure Dim
User Manual: LEDEEN DiM Series Electric Actuator Brochure Resource Library
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
LEDEEN DiM Series Electric Actuator Electric actuation for valve automation in hazardous locations LEDE EN ® LEDEEN DiM Series Electric Actuator TYPICAL APPLICATION For on/off or modulating control of any multi-turn, partial turn, or linear valve in oil and gas applications. BENEFITS • D eveloped and built for use in the oil and gas industry, based on field-proven technology • P artial-turn, multi-turn, and linear configurations available for use with any valve type • E asy system integration with open communication interfaces • Reduced-maintenance design • Constant self-monitoring for reduced errors 2 LEDEE N® STANDARD FEATURES Enclosed Motor Controls/Sensors • Sturdy asynchronous design • Quick, non-intrusive settings • Special coil layout for improved safety at startup • Graphic LCD with clear, easy-to-read information • T otally enclosed, not ventilated (TENV) motor according to Protection Class IP68 • R eliable, durable position measurement by an absolute value encoder • Integrated temperature monitoring • Only one enclosed electric compartment Handwheel • E lectronic compartment protected against condensate by heating • O peration at any time without changeover mechanism • D ata backup and documentation with PC interface • Safe stop during motor operation Electrical Connection • Redundant to motor operation • Easily adaptable (extension, square end, etc.) • P lug-and-play connector for power and control lines Transmission • Low-wear, planetary gearbox for long life • C able entries according to international preface standards (M, NPT, G, etc.) • Safe startup across all temperatures • Adjustable solutions for bus systems • Flexible mounting position Valve Connection • No routine lubrication maintenance required • Sturdy metal casing • High-speed range for closing time adjustment • Connections available for all types of valves • Easily interchangeable • Connections according to international standards STANDARD PRODUCT CHARACTERISTICS SERIES TYPE TEMPERATURE RANGE EXPLOSION-PROOF ATEX Directive 94/9/EC- DiM NT -25º C to 60º C (-13º F to 140º F) EN 60079-0:2012, EN 60079-1:2007, EN 60079-7:2007, EN 60079-31:2014 DiM LT -55º C to 40º C (-67º F to 104º F) Marking: II 2 G Ex d e IIC T4 or Ex d e IIB T3 3 BASIC DESIGN 4 3 5 6 2 1 7 8 Item 4 Description 1 Redundant planetary gear design 2 Handwheel for emergency operation 3 TENV motor 4 Local control station 5 Control unit 6 Sensors (torque, position, and motor protection) 7 Plug-and-play connectors 8 Output drive valve adaption CONTROLS All local controls can be set via sturdy push buttons or the magnetic pen system. If the actuator is not directly accessible, it can be controlled and programmed via a Bluetooth device such as a PDA, including software upgrades and firmware updates. It also is possible to permanently place the control unit separated from the actuator itself for further independence. • L arge, multilingual backlit graphic display with clear text and icons instead of codes or numbers (no handbook to interpret the codes required) • Simple, non-intrusive setting • Firmware updates, diagnoses, and maintenance functions • Separation of the control unit from the actuator is relatively effortless • Handling is simplified due to big, sturdy push buttons or magnetic pen systems LEDEEN® LED EEN ® 5 SYSTEM INTEGRATION The integration of the LEDEEN electric actuators into a control system is possible via a multitude of fieldbus connections or via a free-configurable, hard-wired interface. All fieldbus devices can be delivered with the common redundancies, to help enhance system safety and reliability. LEDEEN® SIMA MASTER STATION Commissioning Tool System Integration Cameron’s SIMA master station solution integrates field devices, like actuators, into an automation environment and supports a variety of protocols such as PROFIBUS DP and Modbus RTU. Data Concentrator SIMA also functions as a standalone automation system, allowing the actuator to be operated and commissioned autonomously from a higher automation system. Actuator and communication parameter settings can be performed and tested. Redundant Security In addition to the essential feedback information, Cameron’s LEDEEN® DiM series electric actuators provide a wide variety of data that can be used by the SIMA master station to quickly and easily diagnose the system with reduced stressing. To allow for enhanced safety operations, the SIMA master station has been designed as a highly redundant unit with both the master unit and the cables being redundant in case of a failure. LEDEEN electric actuators can be integrated into various bus topologies, including: 6 PROFIBUS ® DP V0 -V1 -V2 PROFISAFE ® FOUNDATION™ fieldbus Modbus® RTU Loop DeviceNet™ HART protocol MODEL NUMBER DESIGNATION The below multi-turn model number designation may not include all aspects. Functional Safety and SIL Functional Safety options are available as well. For critical applications, LEDEEN electric actuators can be equipped with emergency shutdown (ESD) and/or safe-stop functions. 1 2 DiM 120 3 4 7 5 6 7 A 25 Ex F10 D400/50 7 6 5 Output Flange Size F07, F10, F14, F16 – DIN EN ISO 5210 G0, G1/G2, G3 – DIN 3210 Type of Current Voltage/Frequency D – Three-phase current W – Single-phase current G – Direct current Version Ex 4 3 2 1 Output Speed 5, 10, 16, 25, 32, 40, 50, 80, 120, and 160 Output form A – Stem nut B, B1, B2 – Plug bush B3, B4, E – Bore C – Claw coupling D –Shaft end Actuator Size 30, 59, 60, 120, 249, 250, 500, 1000, 2000 TECHNICAL DATA For additional technical data such as torque charts, dimensional drawings, etc., refer to the LEDEEN DiM series actuators technical data packages or contact LEDEEN@c-a-m.com. Model Number DiM Note: All references herein to “explosion-proof” are per ATEX directives 94/9/ECEN 60079-0:2012, EN 60079-1:2007, EN 60079-7:2007, EN 60079-31:2014. 7 3250 Briarpark Drive, Suite 300 Houston, TX 77042 USA Toll Free 1 800 323 9160 Via Gandini 4 27058 Voghera, PV Italy Tel 39 0383 343311 Learn more about LEDEEN actuators at: www.c-a-m.com/LEDEEN or email LEDEEN@c-a-m.com www.c-a-m.com/valveautomation or email valveautomation@c-a-m.com ENVIRONME N XCELLEN LE CE TA TH SAFETY AL A HE ND CA HSE Policy Statement At Cameron, we are committed ethically, financially and personally to a working environment where no one gets hurt and nothing gets harmed. MERON ©2014 Cameron | LEDEEN is a registered trademark of Cameron. All others are registered trademarks or trademarks of their respective owners. | 11/14 AD01607V
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c014 79.156797, 2014/08/20-09:53:02 Create Date : 2015:04:22 08:55:26-05:00 Metadata Date : 2015:04:22 08:55:33-05:00 Modify Date : 2015:04:22 08:55:33-05:00 Creator Tool : Adobe InDesign CC 2014 (Macintosh) Instance ID : uuid:f257ed7c-93fd-e84b-9e66-dbfe885cc364 Original Document ID : xmp.did:1CA94B88192068118C149301976A93E8 Document ID : xmp.id:b45f2032-2472-4819-88ec-4b6fa0014594 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:dc127592-a835-4142-b0eb-eba4de79749b Derived From Document ID : xmp.did:8653bcb3-32c2-4620-9400-506e719dfa02 Derived From Original Document ID: xmp.did:1CA94B88192068118C149301976A93E8 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Macintosh) History Changed : / History When : 2015:04:22 08:55:26-05:00 Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 8 Creator : Adobe InDesign CC 2014 (Macintosh)EXIF Metadata provided by EXIF.tools