Lmi Volume 18_rev5 TDS 281 W 18

User Manual: TDS 281 W

Open the PDF directly: View PDF PDF.
Page Count: 109

DownloadLmi Volume 18_rev5 TDS 281 W 18
Open PDF In BrowserView PDF
Toll Free: 877.548.5900
Phone: 847.752.2700
Email: sales@livorsi.com
www.livorsi.com
Volume 18

Table of Contents
Actuators - please visit website
Battery Boxes - Optima
Beverage Holders

2

105
107

Cleats
Color Options
Controls
DTS Controls
Electronic Side Mount
Platinum Series
Side Mount Control - Mechanical
Hardware and Accessories
Dash Designer
Dash Panels
Data Gateways
Drive Showers
Dock Lines/Fender Lines

92
21

Fire Extinguisher and Mounts
Foot Pedal- Electronic
Gauge Accessories
Bezels
Visor rims
Gauge Hardware
Gauge Styles

106
13

10
12
6
15
17
4
4
61
103
93

57
56
37
20

Gauges
Depth Finder
GPS Speedometer with Odometer
Industrial
Mega and Race
Raw Water Flow Gauge
Vantage View®
GPS Antennas/Receivers
Grab Handles
Hatch Actuators
Indicators
LED Position Indicator
Mechanical Indicators
Led Lighting
Navigation Lights
Underwater LED Lighting
Mufflers - Sound Elimination
NMEA® 2000 Harnessing
Senders - Fuel or Water Level
Sea Strainers
Steering Wheel Hub Adapter
Steering Wheels
Switches
Trim Panels
Wire Harness Solutions

40
39
22
28
41
43
38

106
80
72

82
100
97
101
60

59
104
92
85
94
84
14

Distributors

715 Center Street
Grayslake, IL 60030
Toll Free: 877.548.5900
Phone: 847.752.2700
Fax: 847.752.2415
Email: sales@livorsi.com
www.livorsi.com

FLORIDA

TEXAS

INTERNATIONAL SALES

Doller Offshore Marine
3115 N 29th Ave
Hollywood, FL 33020
Phone: 954.237.0332
Fax: 954.237.0341
Email: mindi@dolleroffshore.com
www.dolleroffshore.com

Victory Marine
5311 FM 646 East
Dickinson, TX 77539
Phone: 713.910.2000
Fax: 281.559.4936
Email: sales@victorymarine.com
www.victorymarine.com

Cala Marine Corp.
13540 SW 135 AVE, #201
Miami, FL 33186
PHONE: 305.254.0214
FAX: 305.254.0344

KE Performance
11 Industry Drive
Palm Coast, FL 32137
Phone: 386.446.0660
Fax: 386.445.1122
Email: sales@keitheickert.com
www.keperf.com

NEW YORK

CALIFORNIA

Land N Sea
3131 N Andrews Ave
Pompano, FL 33064
Phone: 800.432.7652
Fax: 800.942.1947
Email: eddieb@landnsea.com
www.landnsea.com

CP Performance
5725 Redwood Dr
Rohnert Park, CA 94928
Phone: 800.225.9871
Fax: 707.585.2935
Email: sales@cpperformance.com
www.cpperformance.com

Lewis Marine
220 SW 32nd Street
Fort Lauderdale, FL 33315
Phone: 800.327.3792
Fax: 954.463.7715
Email: sales@lewismarine.com
www.lewismarine.com

Teague Custom Marine, Inc.
28115 Avenue Stanford
Valencia, CA 91355
Phone: 661.295.7000
Fax: 661.295.7007
Email: sales@teaguecustommarine.com
www.teaguecustommarine.com

Speed & Custom Marine
4168 Old Federal Road
Quincy, FL 32351
Phone: 850.875.0381
Fax: 850.875.0371
Email: sncmarine@tds.net
www.speedncustommarine.com

If you do not see what you are
looking for or have a custom
application, please give us a call.

Lewis Marine Supply
PO Box 2103 Greenport
Long Island, NY 11944
Phone: 631.447.1078
Fax: 631.477.3783
Email: sales@lewismarine.com
www.lewismarine.com
Nisonger Marine
225 Hoyt Avenue
Mamaroneck, NY 10543
Phone: 866.849.2858
Fax: 914.381.1435
Email: info@nisonger.com
www.nisongermarine.com

WISCONSIN
Mercury Marine
W 6250 W Pioneer Rd
Fond du Lac, WI 54936
Phone: 920.929.5040
Fax: 920.929.5893
www.mercurymarine.com

International Boating LTD
2890 Dundee Road
Northbrook, IL 60062
Phone: 847.564.9945
Fax: 847.564.9951
Email: ibs@marine-exporter.com
www.marine-exporter.com
Land N Sea- Midwest, Inc.
8698 Escarpment Way
Milton Ontario L9T 0M1 Canada
Phone: 905.636.4771
www.landnsea.com
Land N Sea
Latin America & Caribbean
11650 Interchange Circle N.
Miramar, FL 33025
Phone: 954.744.3560
Fax: 954.744.3599
www.landnsea.com

BRAZIL
P3LSCO
R do Niquel 118/21
São Paulo - SP- Brazil
Phone: 55 11 5535 8615
Email: p3lsco@gmail.com

3

DashDesigner

Dash Panels
Our panels are available in real carbon fiber.
Send us a dimensional drawing, or your old panel and
we'll recreate it.
Toll Free: 877.548.5900
Phone: 847.752.2700

blue

4

red

carbon
Fiber

silver
carbon
fiber

Visit www.livorsi.com where you'll find the
Livorsi DashDesigner. This interactive tool lets
you select some of our custom options. Or,
check out our Custom Gauge Gallery to see
some of our customer’s creations.

Custom Gauges

New Color
Black Stardust

New Color
Gun Metal

5

Platinum Series Controls
Designed to be ergonomically comfortable to the operator while being lighter and more compact
for fitting into tight spaces. The Platinum Series is finished with a two coat process which
prevents corrosion and can be configured for single or multiple engine's for Drives,Transmissions,
Jet Drives or Buckets.

Available in three throttle/shift configurations:
• Fully Mechanical
• Fully Electric
• Mechanical/Electric (Hybrid)
Configurations include one or any combination of the below:
•
•
•
•
•

The use of mechanical 33C or 43C cables for mechanical levers
Electric configurations use compact direct driven angular sensors,
0-5 Volt electronic sensors or a PWM signal
The use of a micro switch - for electronic transmission shifting
Single, twin and triple in-handle trim switch available
Check with the engine manufacturer or Livorsi Marine for electric control compatibility

Arched

6

Billet

Standard

Platinum Series Controls
Fully Mechanical Billet Throttle Control
with Contour base in Carbon Fiber
Ergonomically
designed knobs
for long hours of
comfortable operation

In-handle single, dual or
triple trim switch available

Shorter handleseasily fits in tight spaces
Adjustable
detent and friction

Flat or contour base in
chrome, carbon fiber or
power coat finish

Mechanical levers
use 33C or 43C
series cables

Shorter base depth:
mechanical units 8.125"
electric units 6.5"

Billet aluminum and
stainless steel construction
makes these controls tough
and lightweight

Electrical configurations
use compact direct driven
angular sensors

Corrosion resistant: two layers process
anodized base coat
powder coat finish

Check with the engine manufacturer or Livorsi Marine for electric control compatibility.

7

Platinum Series Controls
Dimensions

Handles

Overall Size
A DIM

B DIM

1

2-1/4” x 7-3/4”

1-7/8” x 6-1/2”

2

3-11/32” x 7-3/4”

2-7/8” x 6-1/2”

3

4-7/16” x 7-3/4”

3-7/8” x 6-1/2”

4

5-17/32” x 7-3/4”

4-7/8” x 6-1/2”

5

6-15/32” x 7-3/4”

5-7/8” x 6-1/2”

6

7-9/16” x 7-3/4”

6-7/8” x 6-1/2”

8

9-9/16” x 7-3/4”

8-7/8” x 6-1/2”

Mechanical / Hybrid

Electric

8.125”

6.5”

Depth

For a list of part numbers please refer to our price list available online.

8

Cutout Size

Platinum Series Controls
Build Your Part Number

Carbon Fiber Base Options
black carbon fiber

silver carbon fiber

BBEM22SCBBK

Powder Coat Options

9

Livorsi SmartCraft® DTS
Digital Throttle & Shift

These DTS controls are smaller and lighter: constructed of
stainless steel and billet aluminum for years of dependable
service. The user has the ability to adjust tension for each
handle. The ergonomically designed knobs feature your choice
of single or twin drive trim switches or momentary up and
down switches.

• A license from Mercury allows Livorsi to combine
•
•
•
•

DTS technology with the options and quality of Livorsi controls
Designed for direct drive of the triple redundancy position pots
Eliminates the need for mechanical cables
Engineered for smooth shifting and throttling
Single, twin, triple, and quad control configurations are
available in a variety of styles and colors.

Compatible with:
• Mercury DTS equipped engines
• Verado 150 - 400 SCI
• Mercruiser 5.0L - 8.2L
• Optimax 225
• Mercury Racing 520, 565, 1100, 1350, 1650
• and Cummins engines that are DTS capable

Shadow Mode Available

10

Dimensions
Number of Handles
2
3
4
6
8

handle
handle
handle
handle
handle

Overall
A DIM
3 3/8 in.
7 3/4
4 1/2 in.
7 3/4
5 11/16 in. 7 3/4
8 in.
7 3/4
10 5/16 in. 7 3/4

in.
in.
in.
in.
in.

2
4
5
7
9

Cutout
B DIM
7/8 in.
5 1/8
1/64 in.
5 1/8
3/16 in.
5 1/8
1/2 in.
5 1/8
13/16 in. 5 1/8

in.
in.
in.
in.
in.

Livorsi SmartCraft® DTS
Digital Throttle & Shift

Shadow Mode
Shadow mode available for automatic throttle synchronization for triple or quad
engine applications; where two throttle levers operate three engines or four
engines. Requires appropriate Mercury shadow mode rigging kit.

Chrome Base
Number of Handles
2 handle
4 handle
6 handle
8 handle

No Switch
DTSBB11 + color
DTSBB22 + color
DTSBB33 + color
DTSBB44 + color

Single Switch
DTSBB11S + color
DTSBB22S + color
DTSBB33S + color
DTSBB44S + color

Dual Switch
DTSBB11D + color
DTSBB22D + color
DTSBB33D + color
DTSBB44D + color

Powder Coat Base
Number of Handles
2 handle
4 handle
6 handle
8 handle

No Switch
DTSBB11PC + color
DTSBB22PC + color
DTSBB33PC + color
DTSBB44PC + color

Single Switch
DTSBB11SPC + color
DTSBB22SPC + color
DTSBB33SPC + color
DTSBB44SPC + color

Dual Switch
DTSBB11DPC + color
DTSBB22DPC + color
DTSBB33DPC + color
DTSBB44DPC + color

Triple Engine
892955K32

Quad Engine
Order (4) Single Engine

Mercury DTS Rigging Kits
Single Engine
Twin Engine
84-892955K04
84-893378K04

split throttle/shift
configurations available

Mercury Shadow Mode Rigging Kits
Triple Engine
Quad Engine
8M8025983
8M8025984

Optional Contour Base
For a contour base add the following code after the control part number:
Description
chrome contour base
powder coat contour base

Part Number
CB
CBPC

11

Electronic Sidemount Controls - Livorsi Design Capabilities
The electronic controls shown below are designed for specific OEM builders and cannot be
sold at the retail level. We show these products here to highlight our design capabilities.

Livorsi Marine provides customized
controls to
a number of builders:

If you are an OEM and you require a new control for your application, please call or email us.
We welcome the opportunity of designing a product for you.

Nautique
Centurion

Livorsi EMC Controls
(Electronic Throttle & Mechanical Shift)
• Uniquely designed for engine applications that utilize
electronic throttle control yet require a cable to shift the
transmission, drive, or outboard
• Throttle - Features a dual redundancy potentiometer that is
fully programmable, allowing you to customize the amount
of throttle output throughout the entire range
• Shift - Compatible with 33C or 43C cables

Livorsi EEC Controls (Electronic Throttle & Shift)
• Fully electronic controls that provide a smoother and safer
ride with lightning fast shifting and throttling at your
fingertips
• Throttle - Features a dual redundancy potentiometer that is
fully programmable, allowing you to customize the amount
of throttle output throughout the entire range
• Shift - Military grade switches provide reliable gear position
feedback to the engine controller
• Push button for throttle only mode with LED indication

Both Versions Feature:
• Adjustable friction settings for throttle and shift detent
• Single or twin trim switches available to actuate wake tabs or drives
• Constructed to exceed ABYC standards
• Compatible with PCM, Ilmor and Indmar engines that support

12

electronic throttle and shift control

MB Sports

Malibu

Tigé

Electronic Foot Pedals - Livorsi Design Capabilities
The electronic controls shown below are designed for specific OEM builders and cannot be
sold at the retail level. We show these products here to highlight our design capabilities.
If you are an OEM and you require a new control for your application, please call or email us.
We welcome the opportunity of designing a product for you.

•
•
•
•
•
•
•
•
•

Currently designed to control marine engines that utilize electronic throttle control
These pedals may be calibrated for MEFI5 and 6 engines
This completely electronic design eliminates problematic cables from bow to stern
A sensor is used to send throttle position information from the pedal to the ECU on the engine
Fully sealed to IP68 specifications, this sensor is waterproof and highly durable
Plug and play waterproof Deutsch connectors simplify installation
Solid rugged design, made of billet aluminum with an anodized finish to prevent corrosion
Aggressive anti-slip features are built right into the pedal for confident non-slip throttling
Private Labeling available

Diamondback Airboats

Levitator Engines

13

Custom Wire Harness Solutions
Livorsi is ready to meet your short to medium run mechanical and electrical
cable assembly requirements.

•
•
•
•
•
•
•

Engineering design support to help maximize efficiencies
Electro-mechanical assembly, process development, fabrication and testing
Semi-automated wire and cable cutting and stripping for quick change-over
Ultrasonic wire welding
Semi-automated terminal crimping
Custom wire labels to identify individual wires; decreases assembly time and errors
Soldering
Livorsi utilizes state-of-the-art equipment from top manufacturers like Komax, Stapla, Cami and Shimpo.
Cutter/Stripper
Cuts and strips wire and cable to precise programmed length.
individual wires · multi-conductor cable · wire braid · phone wire · full strip · half strip · partial strip
Wire Terminal Crimper
A semi-automated machine that provides precise and consistent compression of wire terminals,
ensuring accurate in-process crimp height, crimp force and strips. Terminal types include: Molex · AMP
· Deutsch · Hirose · Others

Komax BT 722 wire
terminal crimper with
crimp force technology

Ultrasonic Wire Welder
Helps reduce design time and component costs by integrating 100% quality monitored ultrasonic splice
welded wires into your wire and cable harnesses. High electrical integrity with strong metallurgical
bonds ensures a reliable connection between various gauges of wire.

In addition to in-process quality assurance, we perform 100%
quality control final testing on all wire harness assemblies.

14

•
•
•
•

Cable Eye Testing
Pull Force Gauge
LCD Video Microscope
Value Added Wire Assembly

We can supply all harnesses
needed for your OEM boat applications.

Mechanical Side Mount Control
Single handle-dual function control operates both throttle and shift.
Suitable for any type of boat with outboards, inboards, I/Os or jet boats.

• In-handle trim switch for drives and diverters
• Can be installed on either port or starboard side,
•
•
•
•

DISCONTINUED

with a vertical or horizontal cable entry
Contains a positive lock-in neutral to prevent accidental gear engagement
Accepts 33C type cables as well as Mercury, Yamaha, Evinrude and others
Includes a cable connection kit and neutral safety switch
Available in all the Livorsi powder coated colors

Control Bezel
• The optional bezel adapts a Mercury 3000 or 4000 side mount
shifter cutout to fit this control
• Available in a platinum powder coat finish, other Livorsi colors
available at an extra charge

DISCONTINUED

Cutout -Installation Diagram

Description
side mount control
with cable connection kit

Part Number

control bezel platinum
control bezel in another color

SMCBPL
SMCB + color

SMC + color

15

Mechanical Sidemount Controls
Mechanical Sidemount Features
•
•
•
•
•
•
•
•

Now with a shorter throw - 180 degrees
Supports outboard and sterndrive configurations with 33C cables
Built in single trim switch controls drives, tabs wake plate, etc.
Adjustable friction settings for throttle and shift detent
Pull up collar design prevents accidental reverse or forward engagement
Center button disengages shift for throttle only mode
Available in all the standard Livorsi colors
Custom colors available upon request

Tow Sport Control (Ski Boats)
• Customizable
– Branding
– Colors
• Backfittable
– Replaces Teleflex MV3

16

Runabout Control
• Customizable
– Branding
– Colors
• Backfittable
– Replaces Mercury MPC GEN II Panel Mount controls
– Replaces Teleflex CH2200 + CH2300 controls

Control Hardware & Accessories
Trim Switches
• Replacements for Standard, Billet or ETS Controls
• These switches will not work on Mercury controls

Trim Switches
single no wires
single w/ wires
single w/ wires & plate
single w/ wire, plate & back plate
dual w/ wires & plate
dual w/ wires, plate & back plate

TSSO
TSSW
TSSWP + color
TSSWPB + color
TSDWP + color
TSDWPB + color

dual with wires
and plate

Triple Trim Switch - bolt on
• Trim multiple drives or tabs without
•
•
•
•
•

taking your hands off the throttle
Ergonomic design keeps throttling arm relaxed
Aircraft style bolt-on adds a total of 3 switches
For left or right handed applications
Made of billet aluminum
Fits standard or billet controls

Triple Trim Switch

TTS + color

17

Neutral Safety Switch
• Allows you to start engine only when in neutral
• Included at no charge with your control order
• One needed for each shift

Neutral Safety Switches

switch only
switch with wire assembly
switch with wire assembly and screws

NSS

NSSA
NSSAK

Diodes
diode kit- diodes only
4 piece kit for twin engine
diode plug in harness- twin
diode plug in harness- triple

Diode Kits
• 3 amp
• 1000V

33C Series Cables
• Sold in two foot increments
• Sizes range from 10 feet to 38 feet
• Use with Livorsi controls or mechanical indicators
• Stainless steel core
• Chrome plated brass
• 3 1/4” throw
• Thread size 10x32
Part Number
CA + LENGTH

18

DK
DKH2
DKH3

Control Hardware & Accessories
Cable Adapter Kits
• 1 kit needed for 1 throttle/1 shift lever

Description

Part Number

Mercury OB 1 shift/1 throttle

CCKOBM

Mercury I/O 1 shift/1 throttle

CCKIO

OMC OB 1 shift/1 throttle
Cable Connection Kit
(included at n/c with
control order)

CCKOBO

Cable Connection Kit
for 43C series cables

CCKOBM

CCK30

CCKIO

CCK40

CCK30 shown here

Throttle Bezels
• For standard, billet, ETS and arched controls
• Measures 8 1/4” long
• Width varies depending on the number of handles
• Sold separately from controls
Description
2 handle bezel
3 handle bezel (requires 2 week lead time)
4 handle bezel
6 handle bezel

Part
TB2
TB3
TB4
TB6

Number
+ color
+ color
+ color
+ color

19

Gauge Styles
Industrial
dials: black or white
rims: SAE rim
Page 22

Mega & Race
dials: black, platinum,
carbon fiber, silver
carbon fiber or white
rims: Mega or Race
Page 28

Vantage View
dials: platinum, white or black
rims: Mega or Race
Page 43

20

Color Options
Dash Panels

Dials

Powder Coat Colors

* black - BK

orange - O

blue - BL

platunum - PL

black
stardust BS

polished
stainless
steel PSS

Rim Styles

Race Rim

* black- BK
blue carbon fiber

carbon fiber- CF
red carbon fiber

silver carbon fiber- SF

carbon Fiber
CF
platinum- PL

silver carbon fiber
SF

gun metal - GU

purple - PU

lime - L

red - R

mustard - MU

white - W

white- W

Mega Rim

SAE Rim

* Black gloss finish available upon request

21

Industrial Series
Analog Gauges
The Industrial series was designed with the industrial equipment,
workboats, pleasure boats and vehicles in mind.
Industrial Series gauges are easy to install with the use of plug-in
Deutsch connectors that significantly decrease rigging time. The plug-in
connectors are waterproof and resist salt corrosion and dust intrusion.
These gauges feature fade resistant powder coated pointers; SAE rims
in a powder coat finish or in polished stainless steel. These finishes
protect the rims and make them extremely resilient in harsh weather
environments.

Industrial Series Features
• Standard gauge sizes
• Plug-in connectors are waterproof and resist salt corrosion
• Gauges are encased in non-ferrous hardware
• Red LED lighting is standard
• Available in 12 or 24 volt system
• Powder coated pointers are fade resistant
• SAE rims in flat black, white or stainless steel

Dial
Rim

22

Industrial Series
Tachometers

Gas tachometers are compatible with:
4, 6, & 8 cylinder, V-10 & Merc O/B 6 pulse/12 pole

6,000 RPM

cutout size: 3 3/8”

8,000 RPM

10,000 RPM

12,000 RPM

overall size:3 3/4”

Tachometers - Gas
Description

Base Part Number

Requires

6,000 RPM

DCS6000

DCH harness

8,000 RPM

DCS8000

DCH harness

10,000 RPM

DCS10000

DCH harness

12,000 RPM

DCS12000

DCH harness

Tachometer Hardware
Description

Part Number

DCH harness 12V 24” lead

DCH

DCH harness 24V 24” lead
DCH harness 12V w/ tach filter,
reduces needle bounce, 24” lead

DCH24

DCH

4,000 RPM

cutout size: 3 3/8”

DCTFH

overall size:3 3/4”

Tachometers- Diesel 4000 RPM
Description
Base Part Number

Requires

alt driven

DC4000DA

DCH harness

mag probe driven

DC4000MPD

DCH harness

mechanical signal
generator driven

DC4000MSGD

DCH harness

23

Industrial Series
GPS Speedometers
• Livorsi GPS Speedometers require a NMEA 0183 antenna/receiver.

Description

Included with GPS Speedometer
• speedometer
• memory recall
• harness

Dial

Included with GPS Speedometer Kit
• speedometer
• memory recall
• harness
• GPS antenna
- antenna mounts with a 1/4” screw
- antenna dimensions: 2 ¾" L x 2 3/8" W x 7/8" H

GPS antenna

24

120 MPH

cutout size: 3 3/8”

Rim

overall size:3 3/4”

Base Part Number

50 MPH

GPSS50

60 MPH

GPSS60

80 MPH

GPSS80

100 MPH

GPSS100

120 MPH

GPSS120

140 MPH

GPSS140

160 MPH

GPSS160

180 MPH

GPSS180

200 MPH

GPSS200

Notes

For a GPS Kit,
add the letter “K”
after the MPH.

50 MPH

60 MPH

80 MPH

100 MPH

140 MPH

160 MPH

180 MPH

200 MPH

Industrial Series
Mechanical Gauges

boost 0-35 PSI

fuel pressure 0-15 PSI

fuel pressure 0-100 PSI

oil pressure 0-100 PSI

water pressure 0-35 PSI

water pressure 0-60 PSI

hose kit
vacuum boost

cutout size: 2 1/16”

overall size: 2 3/8”

Description

Base Part Number

Requires

Boost 0-35 PSI

DCSMB35

hose kit

Fuel Pressure 0-15 PSI

DCSMFP

fuel hoses n/a

Fuel Pressure 0-100 PSI

DCSMFP100

Oil Pressure 0-100 PSI

DCSMOP

hose kit

Vacuum/Boost 30 in hg/boost20

DCSMVB

hose kit

Water Pressure 0-35 PSI

DCSMWP

hose kit

Water Pressure 0-60 PSI

DCSMWP60

hose kit

Dial
Rim

Hose Kits - not to be used with fuel
10 feet of hose and fittings

HKA

25 feet of hose and fittings

HK

25

Industrial Series
Electric Gauges
• These electric gauges require the use of a four pin connector wire harness
(unless otherwise noted) that we call a DCH harness.

• We offer these harnesses pre-assembled with labed wire leads, 24 inches in length.

cutout size: 2 1/16”
Description

Base Part Number

Boost 60 PSI

DCSB60

-

Fuel Level 0-90 OHMS

DCSFLGM

DCH/DCH24, fuel level sender

Fuel Level 240-33 OHMS

DCSFL

DCH/DCH24, fuel level sender

Fuel Pressure 0-15 PSI

DCSFP

DCH/DCH24, GSFP/WP

Fuel Pressure 0-90 PSI

DCSFP90

DCH/DCH24, GSFP60/90

Hourmeter

HM *

-

Oil Pressure 0-80 PSI

DCSOP80

DCH/DCH24, GSOP80

Oil Temperature 140-340° F

DCSOT

DCH/DCH24, GSOT1/8

Transmission Temp 140-340° F

DCSTT

DCH/DCH24, GSOT1/8

Trimmeter Merc & Yamaha 10-90 OHMS

DCSTMM

DCH/DCH24

Trimmeter OMC 88-1 OHMS

DCSTMO

DCH/DCH24

Voltmeter 8-18V

DCSVM

DCH/DCH24

Voltmeter 18-32V

DCSVM24

DCH/DCH24

Water Level

DCSWL

DCH/DCH24, water level sender

Water Temperature 100-250° F

DCSWTA

DCH/DCH24, GSOT1/8

Water Temperature 100-280° F

DCSWT

DCH/DCH24, GSWT1/8

DCH Harnesses- pre-assembled
12 volt system, 24 inch leads

DCH

24 volt system, 24 inch leads

DCH24

* Note: Available with Mega or Race Rim only.

26

Dial

overall size: 2 3/8”
Requires

Rim

DCH Harness

Industrial Series
Electric Gauges

boost 60 PSI

fuel level

fuel pressure 0-15 PSI

fuel pressure 0-90 PSI

hourmeter *

oil pressure 0-80 PSI

oil temperature
140-340° F

transmission temp
140-340° F

trimmeter

voltmeter 8-18 V

voltmeter 8-32 V

water level

water temperature
100-250° F

water temperature
100-280° F

27

Mega & Race Series
Analog Gauges
Features
• Standard size or oversize
• Plug-in connectors are waterproof and resist salt corrosion
• Gauges are encased in non-ferrous hardware
• Red LED lighting is standard; for easy viewing in low light conditions
• Available in 12 or 24 volt system
• Your choice of rim style: Mega or Race
Custom Options
• Dial color
• Needle color
• Private label

28

Mega & Race Series
Tachometers
Gas Tachometers are compatible with:
4, 6, & 8 cylinder, V-10, Merc O/B, 6 pulse/12 pole

Gas Tachometers
Description
6,000 RPM
8,000 RPM
10,000 RPM

Part Number

Requires

2 5/8”
-

3 3/8”

4 5/8”

DCS6000

DCL6000

DCH harness

MT8000
-

DCS8000

DCL8000

DCH harness

DCS10000

DCL10000

DCH harness

12,000 RPM

-

DCS12000

-

DCH harness

6000 RPM

8000 RPM

10000 RPM

12000 RPM

4000 RPM

DCH

Diesel Tachometers
Description

Part Number
3 3/8”

Requires

4,000 RPM alt driven

DC4000 DA

DCH harness

4,000 RPM mag probe driven
4,000 RPM mech signal
generator driven

DC4000 MPD

DCH harness

DC4000 MSGD

DCH harness

4 Pin Connector & Wire Harness
• 24 inches in length
• Pre-assembled and labeled
Tachometer Hardware
Description

Part Number

DCH harness 12V 24” lead

DCH

DCH harness 24V 24” lead
DCH harness 12V w/ tach filter,
reduces needle bounce

DCH24
DCTFH

29

Mega & Race Series
GPS Speedometers

Purchase GPS Speedometer only, you get:
• speedometer
• memory recall
• harness for power, ground and back lighting

GPS Speedometer Kit includes
• speedometer
• memory recall
• harness for power, ground and back lighting
• NMEA 0183 antenna - GPSSQ310X

GPSSQ310X antenna
• Mounts with a 1/4” screw
• Dimensions: 2 ¾" L x 2 3/8" W x 7/8" H
• Fast 10 Hz 10x per second update
• 4 ft harness and ring terminals

Build your part number:

30

Description

Part Number

Requires

3 3/8”

4 5/8”

50 MPH

GPSS50

GPSL50

60 MPH

GPSS60

GPSL60

80 MPH

GPSS80

GPSL80

100 MPH

GPSS100

GPSL100

120 MPH

GPSS120

GPSL120

140 MPH

GPSS140

GPSL140

160 MPH

GPSS160

GPSL160

180 MPH

GPSS180

GPSL180

200 MPH

GPSS200

GPSL200

GPS antenna

GPSSQ310X

NMEA 0183 antenna - square body

For a GPS Kit,
add the letter “K”
after the MPH.

Mega & Race Series
GPS Speedometers

50 MPH

60 MPH

80 MPH

100 MPH

140 MPH

160 MPH

180 MPH

200 MPH

120 MPH

31

Mega & Race Series
Speedometers

Speedometer Hoses

DCMS60

DCMS80

Description

Part Number

1/8” ID push on high pressure

GCH1/8

1/4” ID push on high pressure

GCH1/4

DCMS100

Dry Speedometers
Part Number
Description

3 3/8”

4 5/8”

60 MPH

DCMS60

80 MPH

DCMS80

DCML80

100 MPH

DCMS100

DCML100

32

Requires
pitot tube, hose &
mounts
Add “K1” for a kit

You may request dials in any of our
powdercoat colors, extra fees apply.

Mechanical Speedometer Hardware
Mechanical
Speedometers

Recoil Blade Kickup
Description

Part Number

blade only 5”

GCRB

blade fitting 1/4” ID hose

GCF8

blade fitting 1/8” ID hose

GCPM1/8

Kick Up Mount

Blade Assembly Standard

Description

Part Number

1/4” ID hose

GLM1A

1/8” ID hose

GLM1A1/8

Description

Part Number

universal bolt pattern

GCM1A

Blades

Mercury bolt pattern

GCM2A

standard blade 7”

GCT1

blade 5” for GCRB1A / RBM2A

GCRB

Thru hull fittings
2” x 1/8” NPT

THF21/8

4” X 1/8” NPT

THF41/8

90° fitting 1/8” NPT
male push lock x 1/4” ID push lock

GCF6

Blade mounts
tube or blade mount

GCM3

Hoses
Low Profile Blade Assembly
Description

Part Number

regular

GCRB1A

90° angle

GCRB1A90

1/8” ID push on high pressure

GCH1/8

1/4” ID push on high pressure

GCH1/4

Mercury Reverse
Mount Assembly
Description

Part Number

with fittings

GLRMA

with out fittings

GLRM

33

Mega & Race Series
Electric Gauges
• These electric gauges require the use of a four pin connector wire harness
(unless otherwise noted) that we call a DCH harness.

• We offer these harnesses pre-assembled with labed wire leads, 24 inches in length.

Description

Part Number

Requires

2 1/16”

2 5/8”

Clock
Fuel Level 0-90 ohms

DCSFLGM

DCC
DCFLGM

DCH harness
DCH, fuel level sender

Fuel Level 240-33 ohms

DCSFL

DCFL

DCH, fuel level sender

Fuel Pressure 0-15 PSI

DCSFP

DCFP

DCH, GSFP/WP

Fuel Pressure 0-90 PSI

DCSFP90

DCFP90

DCH, GSFP60/90

Hourmeter

HM

Oil Pressure 0-80 PSI

DCSOP80

DCOP80

DCH, GSOP80

Oil Pressure 0-100 PSI

DCSOP

DCOP

DCH, GSOP

Oil Temperature 140-340° F

DCSOT

DCOT

DCH, GSOT1/8

Transmission Temp 140-340° F

DCSTT

DCTT

DCH, GSOT1/8

Trimmeter Merc & Yamaha 10-90 ohms

DCSTMM

DCTMM

DCH

Trimmeter OMC 88-1 ohms

DCSTMO

DCTMO

DCH

Voltmeter 8-18V

DCSVM

DCVM

DCH

Water Level

DCSWL

DCWL

DCH

Water Temperature 100-250° F

DCSWTA

DCWTA

DCH, GSOT1/8

Water Temperature 100-280° F

DCSWT

DCWT

DCH, GSWT1/8

DCH Harnesses
12 volt system, 24 inch leads

DCH

24 volt system, 24 inch leads

DCH24

34

-

-

DCH harness

Mega & Race Series
Electric Gauges

clock

oil pressure 80 PSI

fuel level

fuel pressure 15 PSI

fuel pressure 90 PSI

hourmeter

oil pressure 100 PSI

oil temperature

transmission temperature

trimmeter

voltmeter

water level

water temperature 250 F

water temperature 280 F

35

Mega & Race Series
Mechanical Gauges

Part Number

Description

Requires

2 1/16”

2 5/8”

Boost 0-35 PSI

DCSMB35

DCMB35

Fuel Pressure 0-15 PSI

DCSMFP

DCMFP

Fuel Pressure 0-100 PSI

DCSMFP100

DCMFP100

Oil Pressure 0-100 PSI

DCSMOP

DCMOP

hose kit

Vacuum/Boost 30 in hg/boost 20

DCSMVB

DCMVB

hose kit

Water Pressure 0-35 PSI

DCSMWP

DCMWP

hose kit

Water Pressure 0-60 PSI

DCSMWP60

DCMWP60

hose kit

hose kit
fuel hoses n/a

Hose Kit
• not for fuel
• use with mechanical gauges
• 1/8” ID
Description

Part Number

25 feet with fittings

HK

10 feet with fittings

HKA

vacuum boost

36

boost

fuel pressure 15 PSI

fuel pressure 100 PSI

oil pressure 100 PSI

water pressure 35 PSI

water pressure 60 PSI

Gauge Hardware
4 Pin Connector & Wire Harness
• 24 inches in length
• Pre-assembled and labeled

DCH Harness

Part Number

12 volt system

DCH

24 volt system

DCH24

12 volts w/ tach filter

DCTFH

Connector Parts
Description

Part Number

2 Pin - mechanical lights

DCH

Description

Part Number

Senders
Description

Part Number

Fuel Pressure 0-60 PSI / 0-90 PSI

GSFP60/90

Fuel & Water Pressure 0-15 PSI

GSFP/WP

LED Wedge

Isolated Ground for Water Temperature

GSWT1/8I

amber 12.8V

LEDWA

2 pin connector plug

DC2CPLUG

Oil Pressure 0-80 PSI

GSOP80

blue 12.8V

LEDWBL

2 pin connector wedge lock

DC2CWL

Oil Pressure 0-100 PSI

GSOP

green 12.8V

LEDWG

red 12.8V

LEDWRB

4 pin connector plug

DC4CPLUG

GSOT1/8

white 12.8V

LEDWW

4 pin connector wedge lock

DC4CWL

Oil / Water Temperature 100-320°F
Water Temperature 100-250°F
1/8” thread
Pressure 400 PSI

GSP400

Water Temperature- Merc OB Kit

GSWTM

4 Pin - electrical gauges

8 Pin - power distribution
8 pin connector plug

DC8CPLUG
DC8CWL

Water Temperature 100-280°F
1/8” thread

GSWT1/8

12 pin connector plug

DC12CPLUG

Bushing Kit
1 /4”, 3/8” and 1/2” fittings

GSBKK1

12 pin connector wedge lock

DC12CWL

dummy plug

DCDP

contacts for 16 gauge wire

DCC1416

Hand Crimper

DCHCS

8 pin connector wedge lock
12 Pin - power distribution

Clamshells
for 1/4” id hose black

GCCS1/4BK

for 1/4” id hose white

GCCS1/4W

for 1/2” id hose white

GCCS1/2W

Hose Kit for Mechanical Gauges
not to be used with fuel, 1/8 in ID
10 feet of hose and fittings

HKA

25 feet of hose and fittings

HK

37

GPS Antennas

38

GPS Antenna for Vantage View®

GPS Antenna

Part Number: GPSRAQ3VV

Part Number: GPSSQ3

•
•
•
•
•

Antenna is NMEA 0183 compliant
2 3/4” L x 2 3/8” W x 7/8” H
Standard 1-second 1HZ update
4 ft harness and ring terminals
Pre-terminated for quick connection to the Vantage
View Master Harness
• It is recommended to use this model number for full
compliance with Livorsi Vantage View® speedometers

•
•
•
•
•

GPS Antenna for non-GPS speedometers

GPS Antenna with 10X per second update

Part Number: GPSESQ3

Part Number: GPSSQ310X

•
•
•
•
•

•
•
•
•

Antenna is NMEA 0183 compliant
2 3/4” L x 2 3/8” W x 7/8” H
Fast 10 Hz 10x update -8/16 pulse output
4 ft harness and ring terminals
For use with existing automotive or commercial electric
speedos (non-GPS speedo heads)

Antenna is NMEA 0183 compliant
2 3/4” L x 2 3/8” W x 7/8” H
Standard 1-second 1HZ update
4 ft harness and ring terminals
It is recommended to use this model number for full
compliance with Livorsi GPS speedometers
• Compatible with SmartCraft®

Antenna is NMEA 0183 compliant
2 3/4” L x 2 3/8” W x 7/8” H
Fast 10 Hz 10x per second update
4 ft harness and ring terminals

GPS Speedometer w/ Odometer
For automotive or marine applications, this stand alone GPS
speedometer is a digital gauge with an analog readout and a built in
LCD odometer. Designed to be hassle free, this gauge relies on GPS
satellite signals to display accurate speed and miles traveled, so
there is no need to calibrate this gauge with gear ratios or tire size.

Gauge Features
• Digital odometer helps you determine your GPM
• Eliminates the need for cables
• No calibration required
• LCD displays odometer and 3 resettable trip odometers
• 10x update for accurate readings
• 120 MPH or 160 MPH
Gauge Kit Includes:
• Gauge head
• GPS antenna with 10 Hz 10x update
• Switch
• Harness
• Mounting hardware
cutout size

overall size

3 3/8”

3 3/4”

4 5/8”

5”

Description

Gauge Kit Part Number
3 3/8” cutout

120 MPH

GPSSO120K + dial color + rim color + style

160 MPH

GPSSO160K + dial color + rim color + style
4 5/8” cutout

120 MPH

GPSLO120K + dial color + rim color + style

160 MPH

GPSLO160K + dial color + rim color + style

GPS Antenna 10X Update
• Antenna is NMEA 0183 compliant
• 2 3/4” L x 2 3/8” W x 7/8” H
• Fast 10 Hz 10x update
• 4 ft harness and ring terminals
Part Number: GPSSQ310X

39

Depth Finder Gauge
Gauge Features
• Larger LCD digits
• Algorithmic programming
• Instant depth updates
• Easy touch programming
• Keel offset
• English & Metric readings
• Dual depth alarms
• Advanced warning system
• Memory retention
• Polarized LCD
• Plug & Play connectors
• Red LED alarm light
Gauges Specs
• 1 7/8" cutout, 2 1/2" overall
• Green backlighting
• 11-14Vdc
• Readout: min. -2.5 feet / max. 200 feet
• Red LED and blinking LCD icons for alarms
• Transuders have 30" lead
Gauge Kit Includes
• gauge
• transducer
• mounting brackets
• epoxy (for shoot thru only)

Shoot Thru
(uses epoxy)
Description

Transom

Part Number

Depth Only Gauge
head only

DFG + color rim

Kit - Gauge and shoot thru transducer

DFGKST + color rim

Kit - Gauge and transom mount transducer

DFGKTR + color rim

Transducers - Depth Only
shoot thru transducer

TST

transom mount transducer

TTR

Depth - Air - Water Gauge
head only

DISCONTINUED

Kit - Gauge and Transom mount transducer

DISCONTINUED

Transducers - Depth Air Water
transom mount transducer

40

DISCONTINUED

Raw Water Flow System
Safe guard your cooling system from costly damage with Livorsi's
Raw Water Flow System
The Raw Water Flow system indicates your engine's water flow volume. This
system warns you of a potential problem or danger that would otherwise not
be indicated by a water pressure gauge alone, thus preventing cosmetic and
structural damage to expensive exhaust headers, intercoolers and other
cooling systems.

What is Water Flow?
Water flow is a real indication of water surging through a cooling system such
as: exhaust headers, sea strainers, impellers, Gen sets, intercoolers and any
other marine or industrial applications that utilize water flow.

Why You Need It
Don't confuse water flow with water pressure; as many OEM engine manufacturers measure water pressure in different areas of the motor. This number
may not be telling you the real story of water flow. Your water pressure can
be constant from the first day you bought your new boat.

The Raw Water Flow System
prevents this from happening

The danger may be lurking in the water flow which could be caused by
• a plugged heat exchanger
• extensive debris build-up in the intercooler or sea strainer
• a kinked hose
• worn impeller
• water pickups not collecting enough water for cooling system
These may be the culprits causing the good water pressure reading, when in
actuality there is poor water flow. Low water flow results in; cosmetic and
structural damage to expensive exhaust headers caused by burned impellers
and/or the clogging and damage of intercoolers or strainers.

41

Raw Water Flow System
How It Works
Calibration is set at idle and at wide open throttle (WOT). This will generate
the cooling system's normal operating range. When water flow rises or drops
more than 20% from that range (regardless of RPM), it will trip the alarm
illuminating the built-in LED light; an optional audible alarm may be added.
The LED light shines with intensity, making it visible in direct sunlight.

Easy to Install
This kit is easy to install, Livorsi Marine offers three Tee sizes to fit your
system. Mount the Tee in-line on the output side of a sea strainer or sea
pump. The paddle wheel sensor installs in the Tee sending information to be
processed on a circuit board that is mounted behind the dash panel. The
wheel paddle can be easily removed for inspection and locks back into place
once finished. This system trouble-free to install and with little maintenance
to perform.

Raw Water Flow system consists of:
• 2 5/8" panel mounted gauge with internal warning light
• Bronze Tee
• PCB board
• Harness
• Paddle wheel transducer
cutout size

overall size

2 5/8”

2 3/4”

Water Flow Kits
Tee Fitting Size

Base Part Number

1 inch I.D. hose
1.25 inch I.D. hose
1.5 inch I.D. hose

42

1
WFG + dial color + rim color + rim style

1.25
1.50

Vantage View®
Can Bus Gauges

For
SmartCraft®,
NMEA 2000®,
SAE J1939 and
GM MEFI engines

The Vantage View® system comprises of a Master Tachometer that reads information
directly from the ECM/ECU. The Master Tachometer contains a LCD screen in which the
user is able to view the performance data, Faults and Warnings of the boat or vehicle.
All Vantage View® gauges utilize 270° digital stepper motors that accurately display
data in real time. While these instruments are digital, they were designed with the
traditional styling of analog gauges. Fluorescent fade resistant pointers and large bold
graphics make these instruments easy to ready at a glance.
User programmable warning alarms, simplified rigging and rugged construction makes
this line of instruments an exceptional tool for monitoring the performance of a vehicle,
workboat or powerboat.

Each engine requires its own Master Tach
and daisy chains to slave gauges
• Each LCD displays up to 10 engine functions such as
water temp, oil press, GPH, etc.
• Designed to work with SmartCraft®, NMEA 2000®,
SAE J1939 and GM MEFI protocols
• For automotive, industrial or marine applications
• Control module may be mounted in location of your
choosing to navigate through the LCD screen
• Available in sizes 2, 3, 4 and 5"

NEW FOR 2015!
Carbon Fiber and Silver Carbon Fiber dials
We've added the popular carbon fiber and silver carbon
fiber dial option to our Vantage View gauge series.
43

Vantage View®

Four Function Gauge
The 4-in-1 gauge saves you
dash space by combining 4
essential functions into one 5"
gauge: oil pressure, water
temperature, volts and fuel
level.
Speed
Vantage View® reads both
CAN (NMEA 2000® and SAE
J1939) and serial (NMEA
0183) based speed inputs.

44

Programmable Alarms
In addition to factory set Fault
and Warnings, users can tailor
up to 15 alarms to their
individual needs. When
triggered, pop-up alerts
appear on the LCD screen and
the bright LED warning light
illuminates on the corresponding slave gauge.
Pop Up Alerts
Enabling of popup alerts for
faults, warnings or alarms
provides a highly visible alert
screen when a fault, warning
or alarm occurs. Popups may
be enabled for engine trim/tabs
brings up a trim detail screen
when a change in trim position
occurs. Vantage View® even
displays Engine Diagnostic
Codes for J1939.

Faults and Warnings
Vantage View® alerts you of
Faults and Warnings with
blinking icons on the Master
Tachometer LCD screen.
Faults are a problem reported
by the ECM/ECU that warrants
stopping the engine. Warnings
alert you of potential problems
as reported by the ECM/ECU.
Fuel Tank and Engine
Trim Calibration
The Vantage View® system is
the ability to calibrate the fuel
tank and engine trim, ensuring
utmost accuracy. The Master
Tachometer can monitor up to
two fuel tanks with the option
to use an analog signal or
CAN Bus information. The
Engine Trim feature also
allows for one analog or one
CAN Bus signal.

Vantage View®
Can Bus Gauges

Rim Options

Low Profile Rim

Mega Rim

Race Rim

45

Vantage View®
Can Bus Gauges

46

Master Tach, Slave Speedometer or Four in One

Master Tach or Slave Speedometer or Four in One

2-1/2” Slave Gauges

2-1/8” Slave Gauges and FWA gauge

Vantage View®
Can Bus Gauges
Each engine requires its own Master Tachometer
• LCD displays up to 10,000 RPM
• Up to 6 slave gauges may be daisy chained to the Master Tachometer
• Marine configured tachs display “Total Hours”
• Automotive/industrial configured tachs display “Total Miles”
• Have the ability to record and reset three trip logs
• The user can set up 10 parameters of their choice to display in the main
screens. Choose between single or three parameter display.
Menu navigation requires the use of the either a control pod (controls up to 4
engines) or the VV switch control module.

VJS7KPLPLR

control pod

switch control module

Master Tachometer - SmartCraft® protocol

4000 RPM

Part Number
3 3/8”
4 5/8”
VSCS4K
VSCL4K

7000 RPM

VSCS7K

Description

VSCL7K

Master Tachometer NMEA 2000®, J1939 & MEFI4 protocol
Description

VJS4KBKPLR

Part Number
3 3/8”

4 5/8”

4000 RPM

VJS4K

VJL4K

7000 RP

VJS7K

VJL7K

47

Vantage View®
Analog Input- Resistance Ranges
Description
Fuel Level 1
Fuel Level 2
Fresh Water Level
Waste Water Level
Engine Oil Level
Transmission Oil Level
Hydraulic Oil Level
Coolant Level
Washer Fluid Level
Generic Level
Boost Pressure
Block Pressure
Fuel Delivery Pressure
Engine Oil Pressure
Transmission Oil Pressure
Hydraulic Oil Pressure
Brake Application Pressure
Brake Primary Pressure
Brake Secondary Pressure
Generic Pressure
Outside Air Temperature
Inside Air Temperature
Water Temperature
Trim
Steering Angle
Rudder Angle
Front Air Pressure
Rear Air Pressure

48

Resistance Ranges- ohms
240-33, 10-180, 0-90
240-33, 10-180, 0-90
240-33, 10-180, 0-90
240-33, 10-180, 0-90
240-33, 10-180, 0-90
240-33, 10-180, 0-90
240-33, 10-180, 0-90
240-33, 10-180, 0-90
240-33, 10-180, 0-90
240-33, 10-180
240-33, 10-180
240-33, 10-180
240-33, 10-180
240-33, 10-180
240-33, 10-180
240-33, 10-180
240-33, 10-180
240-33, 10-180
240-33, 10-180
240-33, 10-180
10K Thermistor (Airmar T-80)
10K Thermistor (Airmar T-80)
10K Thermistor (Airmar T-80)
240-33, 10-180, 0-90, 167-10
240-33, 10-180, 0-90
240-33, 10-180, 0-90
240-33, 10-180, 0-90
240-33, 10-180, 0-90

Faults or Warnings
Description
Warning Over Heat
Warning Low Oil Pressure
Warning Low Voltage
Warning High Voltage
Warning Over Speed
Warning Water in Fuel
Warning Guardian Active
Warning Check Engine
Oil Fault
Guardian/Check Engine Fault
CAN Fault
Water in Fuel Fault
Voltage Fault
Coolant Temperature Fault

Over-heat
Low Oil Press
Low Voltage
High Voltage
Over Speed
Fuel
Guard Active
Check Engine
Oil
Guard/Ck Eng
CAN Bus
Fuel
Voltage
Coolant Temp

Faults or
Warnings
W
W
W
W
W
W
W
W
F
F
F
F
F
F

Vantage View®
Can Bus Gauges
Single Engine Switch Control Module
• Controls one Master Tachometer
• One assembly needed per engine
• Requires two 1/2 in. cutout for toggle switches

Control Pod
• Control up to 4 Master Tachometers with one pod
• Uses waterproof momentary buttons
• Twin, triple and quad control pods have a polished selector knob
to toggle between Master Tachometers

VVSAW assembly includes:
• Two switches & two boots
• DCC contacts for easy installation
Description

Part Number

Description

Part Number

switch control module

VVSAW

single engine

VVCPSA + color

plate only (2 3/4 in diam.)

PSSP + color

twin engine

VVCPTA + color

mode switch only

TSMF

triple engine

VVCPTRA + color

up/down switch only

TSMFM

quad engine

VVCPQA + color

black switch boot

TSRBBK

Control Pod Dimensions

switch control module

Control Pod
twin engine

switch control
module with
optional plate

49

Vantage View®
Harnessing
SmartCraft® Master Harness
length: 36 in. ± .5 in.

SAE J1939/Indmar Master Harness
length: 36 in. ± .5 in.

Part Number
Number
7
8

VVMHSC
Wire Label
Color
Label
Pink
Analog
Yellow
NMEA 0183

Part Number

NMEA 2000® Micro C Female Master Harness
length: 36 in. ± .5 in.

Part Number
Number
5
6
7
8

50

VVMHN2KF
Wire Label
Color
Label
Blue
Lighting
Red
Battery
Pink
Analog
Yellow
NMEA 0183

Number
1
2
3
4
5
6
7
8
9-12

VVMHJI
Wire Label
Color
Label
Violet
Switched Positive
Black
Ground
Lt. Blue
CAN L
White
CAN H
Blue
Lighting
Red
Battery
Pink
Analog
Yellow
NMEA 0183
to amp connector

Vantage View®
Harnessing
NMEA 2000® Micro C Male Master Harness
length: 36 in. ± .5 in.

Ilmor Micro C Male Master Harness
length: 36 in. ± .5 in.

Part Number

VVMHN2K
Wire Label
Color
Label
Blue
Lighting
Red
Battery
Pink
Analog
Yellow
NMEA 0183

Part Number

VVMHIL
Wire Label
Color
Label
Violet
Switched Positive
Black
Ground
Blue
Lighting
Red
Battery
Pink
Analog
Yellow
NMEA 0183

Number
5
6
7
8

Number
1
2
5
6
7
8

Short Slave Harness

Long Slave Harness
Description

Length

Part Number

Description

Length

Part Number

2 gauge

27 1/2 in.

VVSH2L

2 gauge

17 in.

VVSH2S

4 gauge

53 1/2 in.

VVSH4L

4 gauge

37 1/2 in.

VVSH4S

6 gauge

78 1/2 in.

VVSH6L

6 gauge

54 1/2 in.

VVSH6S

51

Vantage View®
Slave Speedometers

60 MPH

80 MPH

100 MPH

120 MPH

The speedo receives data from the Master Tach which can be from the following:
• CAN message
• Paddle wheel
• GPS signal- uses the A/D digital input available on the Master Tach.
The GPS source must be wired to the proper pin of the 12 pin connector
of the Master Tach.
Both the paddle wheel and GPS antenna must be NMEA 0183 compliant.
Note: Vantage View requires the use of GPS antenna part number: GPSRAQ3VV.
Other GPS antenna models may not work with Vantage View.

Description

Part Number
3 3/8”

4 5/8”

60 MPH

VJS60

VJL60

80 MPH

VJS80

VJL80

100 MPH

VJS100

VJL100

120 MPH

VJS120

VJL120

160 MPH

VJS160

VJL160

180 MPH

VJS180

VJL180

GPS antenna for Vantage View GPSRAQ3VV

52

160MPH

For a kit add “K”
after the MPH

Vantage View®
Slave Gauges
FWA Gauge
This gauge provides five discrete illuminated visual indicators and multiple
outputs. Outputs include a dedicated audible alarm and one set of relay output
contacts for secondary alarms or additional engine protection devices.
This FWA gauge is needed in order for Vantage View® to receive built in Faults
and Warnings from Cummins Diesel engines when a Diesel View display is not
present.
FWA gauge will work on all engine protocols except for
Mercury Gas SmartCraft® engines.
Available with a black dial only. 2 1/8” cutout
Description

Part Number

fwa gauge

VJSFWABK + rim color + style

Color Codes

Four Function Gauge
Save dash space with this four function gauge:
• Oil pressure
• Water temperature
• Volts
• Fuel level

Description

Part Number

3 3/8” cutout

VJS4K + dial color+ rim color + rim style

4 5/8” cutout

VVJNI4F + dial color+ rim color + rim style

53

Vantage View®
Slave Gauges

NMEA 2000® , SmartCraft® , GM MEFI and J1939
Description

Part Number
Small 2 1/8”

Large 2 1/2”

boost 0-35 PSI

VJSB

VJLB

fuel level 1

VVJNISFL1

VVJNILFL1

fuel level 2*

VVJNISFL2

VVJNILFL2

fuel pressure 90 PSI

VJSFP90

VJLFP90

oil level 1

VVJNISOL1

VVJNILOL1

oil level 2*

VVJNISOL2

VVJNILOL2

oil pressure 0-80 PSI

VVJNISOP

VVJNILOP

oil temperature 0-280°F

VVJNISOT

VVJNILOT

trim drive port (left)

VVJNISTDP

VVJNILTDP

trim drive stbd (right)

VVJNISTDS

VVJNILTDS

voltmeter 10-16V

VVJNISVM

VVJNILVM

water pressure 30 PSI

VVJNISWP30

VVJNILWP30

water pressure 60 PSI

VVJNISWP60

VVJNILWP60

water temperature 100-240°F

VVJNISWT

VVJNILWT

boost 0-35 PSI

fuel level 1

oil pressure 0-80 PSI

oil temperature 100-280° F

water pressure 0-60 PSI

water temperature 100-240° F

Note: * Available for Smartcraft only

NMEA 2000® - Ilmor compliant
Description

Small 2 1/8”

Large 2 1/2”

voltmeter- alternator 10-16V

VVNISVMA

VVNILVMA

water pressure 30 PSI

VNSWP30C

VNLWP30C

water pressure 60 PSI

54

Part Number

-

VNLWP60C

Vantage View®
Slave Gauges

fuel level 2

fuel pressure 0-90 PSI

oil level 1

oil level 2

trim drive port (left)

trim drive starboard (right)

voltmeter 10-16

water pressure 0-30 PSI

Vantage View Slave Gauges
• Slave gauges must be connected to the Master Tachometer
via the slave harness daisy chain

• 270 degree sweep with digital stepper motors
• LED warning lights illuminate when programmed alarms are triggered
(setup through the Master Tachometer)
• Fluorescent orange pointers
• Back lit with red LED lighting

55

Visor Rims
Livorsi Visor Rims instantly adds character and dimension to
your existing dash. Made of polycarbonate material with a
beautiful chrome finish, tough enough to withstand salt
water conditions. These rims are made to fit gauges with
SAE or low profile rims.
NOTE: Will not work over Mega or Race rims
without alterations made by Livorsi Marine, Inc.

•
•
•
•
•

Fits gauges with SAE rim or low profile rims
Rotate at any angle for the desired look
Directly attaches to the gauge, screws included
Corrosion proof PC/ABS construction
Chrome finish only

Fits gauges with

Part Number

2 1/8” or 2 1/16” cutout

VR218CH

3 3/8” cutout

VR338CH

The visor Rim attaches by slipping the rim
from the front of the gauge and slipping the
bracket from behind, secure the bracket to
the rim with screws and your done.

56

Bezels
Flat Bezels
Fits a...

Cutout

Overall

Part Number

ignition switch

3 /4”

15/16”

FL34 + color

cigarette lighter

7/8”

1 3/8”

FL78 + color

standard gauges

2 1/16”

2 3/4”

FL216 + color

round GPS antenna &
recall switch plate

2 1/8”

2 3/4”

FLGPSRS + color

monster gauges

2 5/8”

3 1/4”

FL258 + color

speedo/tach

3 3/8”

4 1/4”

FL338 + color

Flat Bezels

adapts 3 5/8” or 4” to
a 3 3/8” cutout
3 3/8”

4 1/2”

FLGPS + color

liquid speedo

4”

5”

FL400 + color

monster GPS/tach

4 5/8”

5 1/2”

FL458 + color

Fits a...

Cutout

Overall

Part Number

standard gauge

2 1/16”

2 1/2”

FL216S + color

speedo/tach

3 3/8”

3 15/16”

FL338S + color

Slim Line Bezels

Angled bezels allow for a fish eye view
of your gauges, left, right, up or down.

polish finish
Angled Bezels
Stainless Steel Flat Bezels

Fits a...

Cutout

Overall

Part Number

Fits a...

Cutout

Overall

Part Number

standard gauge

2 1/16”

2 3/4”

AG216 + color

standard gauges

2 1/16”

2 13/16”

FL216SS

monster gauge

2 5/8”

3 1/4”

AG258 + color

monster gauges

2 5/8”

3 3/8”

FL258SS

speedo/tach

3 3/8”

4 1/4”

AG338 + color

speedo/tach

3 3/8”

3 3/4”

FL338SS

liquid speedo

4”

5”

AG400 + color

monster GPS/tach

4 5/8”

5 11/16”

FL458SS

monster GPS/tach

4 5/8”

5 1/2”

AG458 + color

57

58

Fuel and Water Level Senders
An electronic sender suitable for gas, diesel and water.
• Constructed to meet/exceed all applicable ISO, NMMA, ABYC and USCG standards
• Standard SAE 5 hole pattern
• Constructed of 316 stainless steel
• Fully insulated to protect against voltage inside the tank
• The float is the only moving part of the sensor minimizing mechanical failure
How It Works
Measurement is achieved by a series of reed switches positioned inside the level tube. The
float with built in magnets then triggers the reed relays generating a potential - free
resistance with an ohm value that increases or decreases.

240-33 ohms
Sender Length
4 inch
5 inch
5.5 inch
6 inch
7 inch
8 inch
9 inch
10 inch
11 inch
12 inch
13 inch

Part Number
SFW4
SFW5
SFW5.5
SFW6
SFW7
SFW8
SFW9
SFW10
SFW11
SFW12
SFW13

240-33 ohms
Sender Length
14 inch
16 inch
18 inch
20 inch
22 inch
24 inch
26 inch
28 inch
30 inch
32 inch
34 inch
36 inch

Part Number
SFW14
SFW16
SFW18
SFW20
SFW22
SFW24
SFW26
SFW28
SFW30
SFW32
SFW34
SFW36

standard 5 bolt pattern

Other resistance outputs, lengths or senders with a 1 ¼" NPT are available upon request.

59

NMEA 2000® Harness
Livorsi can supply you with the necessary cables and connectors to expand your NMEA 2000® network.
Below is a chart of in-stock parts, for more options please call Livorsi Marine for pricing and availability.

60

single T connector
Part Number: 010-11078-00

120 Ohm female terminator
Part Number: 010-11081-00

backbone/drop cable 2 ft
Part Number: 000-10068-001

single power cable
Part Number: 010-11079-00

backbone/drop cable 6 ft
Part Number: 010-11076-00

backbone/drop cable 18 ft
Part Number: 010-11076-01

120 Ohm male terminator
Part Number:010-11080-00

MercMonitor
page 62

backbone/drop cable 30 ft
Part Number: 010-11076-02

Mercury In Line Gateways
The new Mercury Gateway converts SmartCraft® engine and
system data to NMEA 2000® protocol for use on non-Mercury
gauges and displays such as our LED Position Indicators.
Note: Gateway will not provide operation power for devices on the
NMEA 2000® network.

Included with Gateway
• Module
• 4 mounting screws
• N2K Tee
• installation instructions

Description

Part Number

single engine gateway

SEGCANP

multi-engine gateway

MEGCANP

Signal
RPM
Voltage
Coolant Temperature
Fuel Level
Fuel Flow
Oil Pressure
Boost Pressure
Engine Hours
Manufacturer ID
Alarm Data

J1939 PGN
61444 / 0xF004
65271 / 0xFEF7
65262 / 0xFEEE
65276 / 0xFEFC
65266 / 0xFEF2
65263 / 0xFEEF
65270 / 0xFEF6
65253 / 0xFEE5
61182 / 0xEEFE
65226 / 0xFECA

Mode
TX
TX
TX
TX
TX
TX
TX
TX
TX
TX

Signal
RPM
Coolant Pressure
Speed
RPM
Voltage
Coolant Temperature
Fuel Pressure
Fuel Level
Fuel Tank Size
Fuel Flow
Oil Pressure
Oil Temperature
Gear Temp
Gear Pressure
Boost Pressure
Trim Position
Rudder Angle
Depth
Depth Offset
Sea Water Temp
Engine hours
Manufacturer ID
Alarm Data
Tabs
Battery
ISO Acknowledge
Course Over Ground
Speed Over Ground
GPS Position
Address Claim
Product Info

NMEA2K PGN
127498 / 0x1F20A
127489 / 0x1F201
128259 / 0x1F503
127488 / 0x1F200
127489 / 0x1F201
127489 / 0x1F201
127489 / 0x1F201
127505 / 0x1F211
127505 / 0x1F211
127489 / 0x1F201
127489 / 0x1F201
127489 / 0x1F201
127493 / 0x1F205
127493 / 0x1F205
127488 / 0x1F200
127488 / 0x1F200
127245 / 0x1F10D
128267 / 0x1F50B
128267 / 0x1F50B
130310 / 0x1FD06
127489 / 0x1F201
060928 / 0xEE00
127489 / 0x1F201
130576 / 0x1FE10
127508 / 0x1F214
059392 / 0x0E800
129026 / 0x9F802
129026 / 0x9F802
129025 / 0x1F801
060928 / 0x0EE00
126996 / 0x1F014

Mode
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX
RX / TX

61

SmartCraft MercMonitor
featuring Mercury® Gateway
MercMonitor featuring the Mercury® Gateway converts SmartCraft® engine and system data to
NMEA 2000®/J1939 protocol for use on NMEA 2000®/J1939 multi-function displays and gauges.
The ECO-Screen feature constantly monitors engine RPM, boat speed, fuel consumption and
engine trim‡ to automatically calculate and guide you to your best fuel economy settings. No
calibration required.

Engines
NMEA 2000®
Outboards &
Sterndrives
Displays
NMEA 2000®
compatible

Data Level

Multiple Tank Levels

2·3

Tabs

2·3

Depth

2·3

Sea Water Temp

2·3

Paddle speed

2·3

Pitot Speed

2·3

Rudder Angle

3

6

Gear Pressure

3

Gear Temp6

3

Fuel Pressure

3

6 Available on Cummins MerCruiser Diesel Engines
†† Digital Trim sender required for full functionality.

Systems
Trim Tabs &
Depth Sounders

Gauges
NMEA 2000®
compatible

Cutout: 3 3/8”

GPS
Chartplotters
Pucks/Receivers

Overall: 3 3/4”

Merc Monitor Kits

Part Number

Notes:

Data Level 1

Single Engine- Troll Control- NMEA 2000

879337K51

Race Rim sold separtely

Data Level 2

Single Engine- RPM SmartTow- NMEA 2000

879338K51

Race Rim included

Data Level 3

Multi Engine- RPM SmartTow- NMEA 2000

879337K52

Race Rim included

Data Level 3

Multi Engine- SmartTow Pro- NMEA 2000

879339K51

Race Rim included

Race Rim for MercMonitor - chrome

62

NMEA 2000® Only
Out/In Supported

MMRRCH

NOTE: This MercMonitor is needed to transmit SmartCraft® information to our LED Position Indicators

NMEA 2000®/J1939†
Out/In Supported

Data Level

RPM

1·2·3

Voltage

1·2·3

Oil Pressure

1·2·3

Coolant Temperature

1·2·3

Tank Level Fuel

1·2·3

Trim Position

1·2·3

Water Pressure

1·2·3

GPS Speed/COG/
Lat-Lon (in only)

1·2·3

Check Engine Alarm

1·2·3

Fuel Flow

2·3

Engine Hours

2·3

Boost Pressure5

2·3

5

2·3

Oil Temperature

5 Available on Mercury Verado
† J1939 limits signals and data levels

Data Gateway (Automotive/Marine)
With the Livorsi Data Gateway you can export CAN (Controller Area Network) engine data to a NMEA 2000® device and display
engine data. For use with Vantage View® gauges or a NMEA 2000® navigation device such as Garmin, Lowrance or
Raymarine. Please note that engine data is only transmitted if there is a sensor to support it.
Use this gateway to translate information to our state of the art Vantage View® Gauges.
Livorsi's Data Gateway simply plugs into a standard NMEA 2000® Tee connector which can be hooked directly to your device.
On the engine side it will interface via CAN+ / CAN- wires to gather the info and send it off to a screen and or gauges.

Possible Configurations
NMEA 2000
Capable Devices

SAE J1939
Capable Devices

Gateway Model Description

Part Number

MEFI to NMEA2K

LGM4N2K

J1939 to NMEA2K

LGJN2K

MoTeC to NMEA2K

LGMN2K

OBD2 to J1939 (GM only)

LGOBDJ

Harness
Deutsch/Micro C, 36 inch harness

GATEWH

63

Data Gateway (Automotive/Marine)
Your engine application may or may not output all of the parameters listed below. Contact your engine manufacturer for a detailed list.
NMEA 2000 Output Parameters (Tx)
Input Parameter(Rx)

NMEA backbone cables,
T fittings and power cable
may be required if you are
not tying into an existing
backbone.
Please note that a
terminating resistor is
required for the system to
perform as designed.
Please see page 60
for harness accessories.

64

Air Temperature
Barometric Pressure
Battery Potential
Boost Pressure
Engine Coolant Temperature
Engine Coolant Pressure
Engine Fuel Rate
Engine Hourmeter
Engine Inlet Air Temp
Engine Percent Load
Engine Oil Pressure
Engine Oil Temperature
Engine Speed
Engine Percent Torque
Fuel Level
Fuel Pressure
Run Time Since Start
Throttle Position
Vehicle Distance (Since DTC clear)
Vessel Speed
Current Gear

SAE J1939 Output Parameters (Tx)

MEFI4A

MEFI4B

MEFI5/6
(J1939)

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

NA (EEC2)2

NA (EEC2)2

X1

X

X

X

X

X

X

X

X

NA (EEC2)

Input Parameter (Rx)

X

NA (EEC2)

2

2

NA (EFL/P1)

NA (EFL/P1)

X

NA (LFE)

NA (LFE)

X

X

X

NA (MEFI4B)

2

2

2

2

Engine Discrete Status:
Check Engine

X

X

Rev Limit Exceeded

X

X

Low Oil Pressure

X

Low System Voltage

X

Low Oil Level

X

General Warning 1

X

General Warning 2

X

Low Fuel Pressure

X

Emergency Stop Mode

X

Engine Over Temp

X

1

2

Air Temperature
Barometric Pressure
Battery Potential
Boost Pressure
Engine Coolant Temperature
Engine Coolant Pressure
Engine Fuel Rate
Engine Hourmeter
Engine Inlet Air Temp
Engine Percent Load
Engine Oil Pressure
Engine Oil Temperature
Engine Speed
Engine Percent Torque
Fuel Level
Fuel Pressure
Run Time Since Start
Throttle Position
Vehicle Distance (Since DTC clear)
Vessel Speed
Current Gear

OBDII
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X

Hydraulic Billet Trim Tabs

Available with a powder coat finish and custom logos

65

Hydraulic Billet Trim Tabs
Features
• For use on boats 20 - 50 feet
• Mil-Spec hard coat anodized topped with a
powder coat finish to prevent corrosion
• Choose between LED electronic position
indication (plug and play) or mechanical position
indication (uses 33C cables)
• Electronic models are compatible with
NMEA 2000® compliant systems and Mercury
VesselView®
• The electronic IP68 sensor plugs directly to
Livorsi's LED Position Indicator
• Tabs are CNC machined from billet aluminum,
no casting

1050 Trim Tab model show here

• Bolt patterns include Mercury and a smaller Livorsi bolt pattern for center consoles
• All hinge pins and hardware are stainless steel
• Adjustable transom angles without the use of special tools
• Hydraulic cylinders are designed for 1500 PSI working pressure with dual seals, cylinders may be serviced
• Five anodes for complete saltwater protection
• Available in 11 powder coat colors and private labeling
• Models are available for performance boats, center consoles, cruisers, run-abouts, workboats and military boats

66

Hydraulic Billet Trim Tabs
Trim Tab Kits include:
•
•
•
•
•

Two billet tabs
Two pumps
Mounting hardware
Harnesses
Thru hull fittings

750 Model

Stainless steel braided hoses are purchased separately. Four
hoses are needed for one kit, two per cylinder.

750 Performance Kits
TTK750ML

Mechanical cable - Livorsi Transom Plate 16X10"

TTK750MM

Mechanical cable - Merc Transom Plate 16X10"

TTK750EL

Electric Trim - Livorsi Transom Plate 16X10"

TTK750EM

Electric Trim - Livorsi Transom Plate 16X10"

850 Model

850 Military Kits
TTK850ML

Mechanical cable - Livorsi Transom Plate 16X14"

TTK850EL

Electric Trim - Livorsi Transom Plate 16X14"

67

Hydraulic Billet Trim Tabs
950 Model

950 Mercury Replacement Kits for 280S
TTK950ML

Mechanical cable - Livorsi Transom Plate 20X9"

TTK950MM

Mechanical cable - Merc Transom Plate 20X9"

TTK950EL

Electric Trim - Livorsi Transom Plate 20X9"

TTK950EM

Electric Trim - Merc Transom Plate 20X9"

1050 Model

1050 Performance Kits

68

TTK1050ML

Mechanical cable - Livorsi Transom Plate 22X10"

TTK1050MM

Mechanical cable - Merc Transom Plate 22X10"

TTK1050EL

Electric Trim - Livorsi Transom Plate 22X10"

TTK1050EM

Electric Trim - Merc Transom Plate 22X10"

Hydraulic Billet Trim Tabs
• Electronic models are compatible with NMEA2000® compliant systems and Mercury VesselView®
• The electronic IP68 sensor plugs directly to Livorsi's LED Position Indicator

Pin Number
1
2
3
4
5
6

Wire Color
Red
White
Blue
Black
Green
Tan

Description
PPS1 (5V)
PPS2 (5V)
PPS1 Signal
PPS1 Ground
PPS2 Ground
PPS2 Signal

69

Hydraulic Pumps
Pump Assembly Kit 12V
Part Number: PAK12V-1

Pump Assembly Kit 24V
Part Number: PAK24V

Pump Specifications

Pump Specifications

Motor

12 VDC
3-wire reversing continuous
ground with thermal breaker

Motor

24 VDC
3-wire reversing continuous ground
with thermal breaker

Hydraulic Pump

2 gear drive
.0321 CIPR (cubic inches per revolution)

Hydraulic Pump

2 gear drive
.0321 CIPR (cubic inches per revolution)

Voltage Rating

12V

Voltage Rating

24V

Max Pressure Up

1200 PSI

Max Pressure Up

1200 PSI

Max Pressure Down

1200 PSI

Max Pressure Down

1200 PSI

Solenoid Specifications

70

Solenoid Specifications

Solenoid type

12V, 65A continuous duty

Solenoid type

24V, 65A continuous duty

Special Applications

Marine

Special Applications

Marine

Insulated/Ground

Insulated

Insulated/Ground

Insulated

NO/NC

Normally Open

NO/NC

Normally Open

Circuitry

Single pole, single throw

Circuitry

Single pole, single throw

UL Marine & CE ISO 8846
Marine

N/A

Operating Temperature range

-40° to + 85°C
(-40° to + 185°F)

Battery studs

5/16 - 24

Battery stud torque

35 in-lbs max (4.0 Nm)

Contacts

Copper

Coil studs

10 - 32

Coil stud torque

15 in-lbs max (1.7 Nm)

UL Marine & CE ISO 8846 Marine Yes

Operating Temperature range

-40° to + 85°C
(-40° to + 185°F)

Battery studs

5/16 - 24

Battery stud torque

35 in-lbs max (4.0 Nm)

Contacts

Copper

Coil studs

10 - 32

Coil stud torque

15 in-lbs max (1.7 Nm)

Stainless Steel Braided Hoses
Inverted Flare Hose Ends

SAE J514 37° Flare Ends

SAE J514 37° Flare Ends

Inverted Flare Hose Ends
Length

Part Number

Length

Part Number

30 inches

SSBH30IN-1

30 inches

SSBH30IN

36 inches

SSBH36IN-1

34 inches

SSBH34IN

48 inches

SSBH48IN-1

60 inches

SSBH60IN

60 inches

SSBH60IN-1

90 inches

SSBH90IN

72 inches

SSBH72IN-1

19 feet

SSBH19FT

90 inches

SSBH90IN-1

21 feet

SSBH21FT

19 feet

SSBH19FT-1

26 feet

SSBH26FT

21 feet

SSBH21FT-1

26 feet

SSBH26FT-1

71

Adjustable Position LED Indicators
Displays position for tabs, drives, jackplates, rudder indicator, fuel and water level
Compatible With:
• NMEA 2000® (Rx + Tx) Devices
• J1939 (Rx + Tx) Devices
• Resistive Sensors (ohms)

• SmartCraft® (with Gateway)
• 0-5 Volt Sensors

What sets these displays apart from anything else is the single middle green
LED. During calibration, this LED display can be set to indicate 50% of
actuator travel, fuel level or whatever you are monitoring.
What makes it so special is that it allows you to establish the optimum
running angle - or sweet spot (not at 50%), to dial-in the vessel for optimal
running efficiency so the novice boater always runs at the correct trim.

No matter what information you are looking to display (fuel level, drive trim, tab position, etc.), the data is
brought into the communication network with plug and play harnessing and is received (Rx) via the network
cable to the LED indicator for display.
The LED indicator can also transmit (Tx) this information via CAN bus to other compatible displays such as
Garmin, Lowrance or Raymarine via NMEA 2000®, SmartCraft® (with Gateway) or J1939 protocols.

72

Adjustable Position LED Indicators

If your boat is already transmitting (Tx) NMEA 2000® data (tabs,
drives, fuel level, water level, rudder angle, etc.), simply plug the
indicator into the NMEA 2000® backbone to begin displaying the
desired feature on the indicator.

73

Adjustable Position LED Indicators
• Simple plug and play installation,
eliminates clumsy cables

Dimensions

• No cables means, no loss of motion
• All electronics are environmentally sealed
• Has the ability to compensate for
non-linear tanks giving you accurate readings

1 or 2 slot indicator: 2 5/8” W x 5 3/16” H overall
requires (2) 1-1/4” cutouts for wiring
3 or 4 slot indicator: 4 1/16” W x 5 7/16” H overall
requires (4) 1-1/4” cutouts for wiring

• 0-5 volt or resistive type sensors (adjustable)
• 1 to 4 slot configurations, vertical or horizontal
Power Supply
Wide input supply voltage of 7-24 VDC, with reverse polarity protection

Calibration
running point
(sweet spot)

Calibration is performed via the proximity/photo sensor on the
front of the indicator
Inputs may be calibrated using either a 2 or 3 point method:
minimum / maximum – or minimum / maximum / center
running point (green LED)

warning LED
with optional sender
proximity/photo sensor
(calibration “button”)

74

This indicator has the ability to compensate for non-linear
tanks (fuel or water), giving you accurate readings

Adjustable Position LED Indicators
LED Lighting Options Include:
Pointer Styleone LED pointer displays your position/level
Fill Bar typemultiple LEDs lit in a row, beginning from the top or bottom

The green LED in the center may be calibrated to show optimal level
position for Drives,Tabs, etc.
The red LED at the bottom of the indicator can be used as
a warning light
pointer style

fill bar

Built-in light sensor automatically adjusts to ambient light with 250
brightness intensity levels

Analog Inputs
Each slot accommodates two analog inputs. One analog
input drives the indicator bar, the other drives the optional
red warning LED located at the bottom of the slot.
Warnings may include (but are not limited to):
Oil pressure, water temperature or low fuel with optional
switch to close sensor.

Connects to 0-5
volts or resistive
type sensors.

ground and switch/warning
input wires for warning LED

75

Adjustable Position LED Indicators
Dimensions
1 & 2 slot

76

3 & 4 slot

Adjustable Position LED Indicators
Voltage or Resistance Sensors

Tabs, drives, jack plates, fuel level, water level and rudder indicator applications must have a
resistance or voltage type sensor present for this system to operate. Below are some of the options.

Mechanical to Electric Converter 0-5 Volts
(cable not included)
Converts the mechanical signal to an
electric signal. Bolts on the inside of the
transom with a short cable to the unit.

Mounted pot on Mercury trim tab 0-5 Volts

Tabs 2010 or newer should contain the 5 volt sensor
Tabs 2006-2010 model Number’s 280S and 380S should
have a bracket to add the sensor

Retrofitted tabs
Mercury pot 0-5 Volts
Please contact your
nearest Mercury dealer.

33 Series Cables

3
4
5
6

ft
ft
ft
ft

CA3
CA4
CA5
CA6

Fuel or water level resistive type sensors 240/33 ohms

NOTE: Must know at time of placing your order,
if sensor is a 2 or 3 wire sensor

Mercury drive pot 0-5 Volts
Part Number: 863187A1

Please contact your nearest
Mercury dealer.

77

Adjustable Position LED Indicators
Building Your Indicator Part Number
NOTE: A 50% restocking fee will be charged for all returned Adjustable Position LED Indicators.

Part Number Example

ALEDI

FIRST
ITEM DATA

SECOND
ITEM DATA

1 or 2 slot

3 or 4 slot

2D

2T

1 Drive = 1D
2 Drives = 2D

1
2

ALEDI2D2TPLCH
Vertical Orientation Examples

78

1
2
1
2
1
2

1 Drive = 1D
2 Drives = 2D
3 Drives = 3D
4 Drives = 4D
1 Tab = 1T
Tab = 1T
2 Tabs = 2T
Tabs = 2T
3 Tabs = 3T
4 Tabs = 4T
1 Fuel = 1F
Fuel = 1F
2 Fuel = 2F
Fuel = 2F
Jack Plate = 1J 1 Jack Plate = 1J
Jack Plate = 2J 2 Jack Plate = 2J
Rudder = 1R
Rudder = 2R

CARD COLOR

FRAME
COLOR

ORIENTATION

PL

CH

V

Black = BK
Carbon Fiber = CF
Platinum = PL
Silver Carbon Fiber = SF
White = W

Black = BK
Blue = BL
Chrome = CH
Lime = L
Mustard = MU
Orange = O
Platinum = PL
Purple = PU
Red = R
White = W

Vertical = V
Horizontal = H

Horizontal Orientation Examples

Adjustable Position LED Indicators
1
Indicator

2
Main Harness

3 & 4 slot requires
two harnesses

4 slot example:

LEDHSA20

Harness Options

2

3

Harness
Harness
Harness
Harness
Harness

3
Jumper Harness

Parts To Order
Sensor

3 & 4 slot may require
two harnesses

Engine/
Drive/
Tank
LEDEXT10

Part Number

a
b
c
d

Main
Main
Main
Main
Main

to Jumper Harness
20 feet
25 feet
30 feet
40 feet

a
b
c
d
e
f
g

Jumper Harness to Sensor Input
Tab/Drive/Fuel Jumper Single 5 feet
Tabs/Drives/Fuel Jumper Dual 10 feet
Tabs/Drives/Fuel Jumper Dual 15 feet
Mercury SmartCraft® Drive Jumper Single (Y Cable) 5 feet
Mercury SmartCraft® Drive Jumper Dual (Y Cable) 5 feet
Mercury SmartCraft® Drive Jumper Dual (Y Cable) 10 feet
Mercury SmartCraft® Drive Jumper Dual (Y Cable) 15 feet

LEDHEXTS
LEDHEXT10
LEDHEXT15
LEDHYS
LEDHYD5
LEDHYD10
LEDHYD15

Mechanical to Electric Converter 0-5 Volts

call for part number

LEDHSA20
LEDHSA25
LEDHSA30
LEDHSA40

79

Hatch Actuators
• Safe working load limit of 400lbs.
• Heavy duty sealed ball bearing motor allows for locking of
•
•
•
•
•

hatches, so it won't open at high speeds
Marine grade stainless steel housing
Lifts 2X as fast and has 2X the power of other electric actuators
Cleaner and more cost-effective alternative to hydraulic and
pneumatic models
Provides consistent performance throughout its lifetime
12 VDC

Hatch Actuator Remote
• Specifically designed for hatch lifting
• Opens hatches from 300 feet away
• Can be used on most hatch motors electric or hydraulic
• Isolated channels prevent damage to the hatch motor
• Use on boats with 2 separate hatches- a relay kit is needed
• Receiver module can be mounted under the dash, wired to the
hatch switch or directly to the motor while keeping the manual
switch functional

HATCH ACTUATOR REMOTE
Kit
includes:
DISCONTINUED
• 1 receiver
• 2 white remotes
Part Number

Description

Closed

Open

Part Number

4” throw

10.32”

14.32”

SSA4

8 ” throw

14.32”

22.32”

SSA8

12” throw

18.32”

30.32”

SSA12

16” throw

22.32”

38.32”

SSA16

18” throw

24.32”

42.32”

SSA18

24” throw

30.32”

54.32”

SSA24

WHAR

aluminum
adjustable bracket

Brackets can be sold separately.
Washers and bolts not included.
bracket

HAB

adjustable bracket

HABT

Mounting Kit

Quick Release Pin
• stainless steel & aluminum

80

Part Number

HAQRP

stainless steel
bracket

Kit includes:
• bracket
• sleeve
• washers & bolts
Part Number

HAMK

81

Mechanical Indicators
Ultra Thin

Livorsi indicators feature a no-slack spring load assist, eliminating slack in
the cable giving you a faster indication of your drives and tabs.

•
•
•
•

Dash mounted indicator
Fluorescent red pointers
Aluminum and composite construction
Adaptable to any actuator with 3 1/4” throw

Set Back Kit
• Allows switches to be mounted at cable entry area on your dash
ultra thin
UMI2D2TBKBK
horizontal layout, right entry
standard pointers

Indicators w/ Fluorescent Pointers
Part Numbers
Number of drives

Number of tabs

1 drive

2 tabs

UMI1D2T + card + frame color

2 drives

2 tabs

UMI2D2T + card + frame color

Specify:
direction of cable entry, horizontal or vertical layout

Indicator Parts
Description

Part Number

Indicator Cards
3 slot

UIC3 + color

Ultra Thin face dimensions

4 slot

UIC4 + color

3 or 4 slot

Frames

3 3/4” W x 5” H

3 or 4

UIF34 + color

Windows
3, 4 or 5 slot

IW34

Pointer Kit with Springs
2 slot

IPK2

4 slot

IKP4

Set Back Kit

82

2 inches set back

SBK

Mechanical Indicators
Standard Size
•
•
•
•

standard
MI2DPLBK
horizontal layout, left entry
standard pointers

Dash mount indicator
Fluorescent red pointers
Aluminum and composite construction
Adaptable to any actuator with 3 1/4” throw

Set Back Kit
• Allows switches to be mounted at cable entry area on your dash

Indicators w/ Fluorescent Pointers
Number of drives
0 drives
1 drives
1 drives
2 drives
2 drives
3 drives
3 drives

Number of tabs
2 tabs
0 tabs
2 tabs
0 tabs
2 tabs
0 tabs
2 tabs

Part Number
MI2T + card + frame color
MI1D + card + frame color
MI1D2T + card + frame color
MI2D + card + frame color
MI2D2T + card + frame color
MI3D + card + frame color
MI3D2T + card + frame color

Specify:
direction of cable entry, horizontal or vertical layout

Indicator Parts
Description

Part Number

Indicator Cards
1 slot

1SIC + color

2 slot

2SIC + color

3 slot

3SIC + color

4 slot

4SIC + color

5 slot

5SIC + color

Frames

Standard size dimensions
1 or 2 slot
2 1/2” W x 5” H
3, 4 or 5 slot
5” W x 5” H

1 or 2 slot

IF12 + color

3, 4 or 5 slot

IF345 + color

Windows
1 or 2 slot

IW12

3, 4 or 5 slot

IW345

Pointer Kit with Springs
2 slot

IPK2

4 slot

IKP4

5 slot

IKP5

Set Back Kit
2 inches set back

SBK

83

Trim Panels
•
•
•
•

Military spec rocker switches
Sealed and waterproof
No exposed screws
Powder coated aluminum

When ordering specify
• Panel color
• Switch cover colors:
red, white or translucent

Cable Thru Hull Fittings
for 33 C Series Cables

Description

Part Number

stainless steel 90°

THF

stainless steel 45°

THA

solid billet stainless steel 90°

THFB

solid billet stainless steel 45°

THAB

Panel Dimensions
3 3/4” x 3 3/4”
THF
THA
Unwired Panels
Description

Part Number

1 drive 2 tabs

UTP1D2T

2 drives

UTP2D

2 drives/override

UTP2DO

3 drives

UTP3D

2 tabs

UTP2T

2 tabs/override

UTP2TO

THAB

THFB

84

Steering Wheels
•
•
•

Momo Budelli - MBSWP
• Leather like grips
• Polished spokes

13.5” diameter
6 bolt pattern
10-32 thread pitch

Kit Includes:
• 2 1/4” black hub
• Center cap
• Mounting screws

Momo Linosa - MLSW
• Brushed spokes
• Chrome accents

85

Gussi Steering Wheels
•
•
•
•
•

86

polished aluminum spokes with tear drop design
black urethane grips
diameter: 13.5”
available in blue, red, yellow and silver
fits ¾" rounded shaft with keys

blue wheel

GWASBL

silver wheel

GWASS

yellow wheel

GWASY

red wheel

GWASR

Part Number: GWSSFK
• stainless steel polish finish
• stainless steel spokes with tear drop design
• Stainless steel speed knob
• diameter: 13.5 "
• fits ¾" rounded shaft with keys

Gussi Steering Wheels
Part Number: GWSSK
• stainless steel polish finish
• stainless steel spokes with tear drop design
• Stainless steel speed knob with
leather like accent
• diameter: 13.5 "
• fits ¾" rounded shaft with keys

Part Number: GWBAS
• anodized aluminum spokes
• black anodized hub
• black urethane grips
• diameter: 13.5”
• fits ¾" rounded shaft with keys

87

Gussi Steering Wheels
• solid cast stainless steel spokes
• wrapped with black marine leather or
marine carbon fiber urethane
• stainless steel center pad
• diameter: 13.5”
• fits ¾" rounded shaft with keys

GWSSSFL

88

GWSSBKL

Isotta Steering Wheels
Isotta Carlotta
•
•
•
•

6 bolt pattern
10-32 thread pitch
13.5” diameter
Black wheel is wrapped in
genuine leather

Kit Includes:

• Hub
• Center cap
• Mounting screws

black

ISWKCBK

silver

ISWKCSF

89

Isotta Steering Wheels
Isotta Aria
• 6 bolt pattern
• 10-32 thread pitch
• 13.5” diameter
Kit Includes:
• Hub
• Center cap
• Mounting screws

90

blue

ISWKABL

red

ISWKAR

silver

ISWKAS

Isotta Steering Wheels

Part Number: ISWK13CFBK
• brushed spokes
• carbon fiber pattern
• leather-like grips and center cap
• diameter: 13.5”

91

Hub Adapter
• For use with Isotta or Momo steering wheels
• 3” deep
• powder coat finish
Part Number

HA + color

Cleats
Mushroom Cleat
• Secure your fender lines to these mushroom cleats
• For fresh water or salt water conditions
• Easy installation, requires 3/4" cutout, 2" overall
• Stainless steel with a polished finish
Description

Part Number

mushroom cleat

MC

Quick Release Fender Cleat
• Quick release pin for fenders
• Not intended for mooring
• Made of 316 stainless steel
• 1.43" base

92

Description

Part Number

fender cleat

QPC

Pull Up Cleats
Fender Lines and Dock Lines
• Sleek design is easy to install and eliminates the need
•
•
•
•

for drainage cups and hoses

Oversized loops
Made of water resistant polypropylene
Will not mildew
Extremely flexible and resists knotting

• Mounded base design allows water to run off the cleat
• Made of marine grade 316 stainless steel for strength
• Polished finish for a long lasting shine

Description
Fender Lines 1/2” thick

7 feet long

Part Number
FL127 + color

Dock Lines
1/2” thick
1/2” thick
5/8” thick
5/8” thick

15
20
25
30

DL1215
DL1220
DL5825
DL5830

feet
feet
feet
feet

long
long
long
long

+
+
+
+

color
color
color
color

Part Number
Weight
A - Length
B - Width
C - Depth
D - Clearance
E - Leg Distance
Hole Size
Max Line Size
Thread Size

PUC4
.8 lbs
4.5”
1.15”
2”
.75”
1.8”
3/4”
1/2” diam.
3/4 - 16

PUC6
1.2 lbs
6”
1.5”
2.3”
1”
2.4”
7/8”
3/4” diam.
7/8 - 14

PUC8
2.56 lbs
8”
2”
3.1”
1.25”
3.2”
1”
1” diam.
1 1/2 - 14

93

Switches

Black & White Rocker Switches
• dust & moisture protected
• snap bracket mounting hole
• 20 amps at 12 VDC
• 1/4” push-on connectors
• 83” x 1.450” cutout
• available in black (BK) or white (W)

Single Pole- Lighted
on/off
on/off/on
Single Pole- Non Lighted
mom on/off
mom on/off/mom on

for Black & White Rocker Switches
• snap together
• available in black only
Mounting Modules
end
center
plug

EMM
CMM
MMP

RSSNFL + color
RSSNFNL + color

RSDNNW + color
RSDNFL + color
RSDNFNL + color
RSDMFM + color

Switch Covers Only
no light
1 light
2 lights
Cover Removal Tool

SCNL + color
SC1L + color
SC2L + color
SCRTL

Military Toggle Switches
• military type specs
• environmentally sealed
• 15 amps at 28 VDC
• 1/2” cutout
• screw terminals
• lift / lock lever
Single Pole

RSSMF + color
RSSMFM + color

Double Pole
on/on- non lighted white
on/off- lighted
on/off/on- lighted
mom on/off/mom on -non lighted

94

Mounting Modules

on/off

MTSSNF

on/off/on

MTSSNFN

mom on/off

MTSSMF

Double Pole

Military Rocker Switches
• military type specs
• environmentally sealed
• 5 amps at 28 VDC
• .94” X 1.51” cutout
single pole
mom on/off/mom on
MRSSMFM + color
double pole
mom on/off/mom on
MRSDMFM + color
military cover only
MC + color
covers available: red, white or translucent

on/off

MTSDNF

MCR
MCW

MCTR

Switches
Toggle Switches
• nickel plated brass
• 1/2” cutout
• 25 amps at 12 VDC
• optional colored rubber boots
Description

Part Number

on/off

TSNF

on/off/on

TSNFN

mom on/off

TSMF

mom on/off/mom on

TSMFM

Toggle Switch Cover
rubber boot

TSRB + color

red only

TSC

boots available in: yellow, white, blue,
purple, red, orange or black

Push Button Circuit Breaker
• 3/8” cutout
• clear boot sold separately

Circuit Breaker Toggle Switches
• requires 1/2” cutout
Description

Part Number

5 amp

TBS5

10 amp

TBS10

15 amp

TBS15

20 amp

TBS20

30 amp

TBS30

Boots
boot- white

TBSBBK

boot- black

TBSBW

Description

Part Number

10 amp

PBCB10

15 amp

PBCB15

20 amp

PBCB20

boot only

PBBCL

95

Xtreme Nut & Boot System

for Push Button
Circuit Breakers
- 3/8” threaded neck
- sold by the pack
pack includes:
- 6 clear boots, 6 nuts,
seals & wrench
XCBNB + color

for Toggle Switches
- 15/32” threaded neck
- sold by the pack
for Circuit Breaker
Toggle Switches
- 1/2-32” threaded neck
- sold by the pack
pack includes:
- 6 black boots, 6 white
boots, 6 nuts, seals &
wrench
XCBTSNB + color

96

pack includes:
- 6 black boots, 6 white
boots, 6 nuts, seals &
wrench
XTNB + color

Underwater LED Lighting
These rugged lights beautifully light up the water around you
creating a stunning aura; they have even been known to attract
sea life. For use on boats and docks.
LED's are designed to have a long life span and these provide
over 40,000 hours of light. Built with internal self protection
circuitry, these lights will not burn you or your gel coat. This
product uses water to cool, but are engineered to and tested to
run continuously and safely out of the water. Lights will automatically turn off when it reaches its max temperature and then
automatically turn back on after it cools.

LED Features:
• High intensity LED lighting
• Surface mount - no major hull penetration
• Fully Submersible - water cooling required
• 316 stainless steel with polycarbonate lenses
• Long life- LED lamp life over 40000 hours
• Operating voltage 9 to 30 volts DC •
•
•
•

brightness does not change
Standard wire length - 20 feet
Internal digital switching power supply
Self contained, no external driver to install
Rugged design

• Low power consumption
• Internal surge suppression
• Internal temperature protection

97

Underwater LED Lighting
Number of
LED Lights

4

6

10

LED Color
white

ULEDL4W

ULEDL6W

ULEDL10W

blue

ULEDL4BL

ULEDL6BL

ULEDL10BL

red

ULEDL4R

ULEDL6R

ULEDL10R

ultra blue

ULEDL4UB

ULEDL6UB

ULEDL10UB

green

ULEDL4G

ULEDL6G

ULEDL10G

Number of
LED Lights

4

6

10

Specifications

98

Watts

17

25

42

Amps

@12v:1.4

@12v:2.1

@ 12v:3.5

Height

2.375"

2.375”

2.25”

Width

5.8"

7.2"

10.25"

Deep

2”

2”

2”

Lumen Output
White only

1000

1500

2500

LED Navigation Lights

shown closed
with optional cup

Pop Up LED Bow Light
• Port and starboard light in one housing
• Marine grade 316 stainless steel
• Folds down flush when closed
• USCG approved for 2 nautical miles
• LED lights stay cool to the touch
• Optional cup for water run-off
• Light with cup measures 3 1/4” deep
• Light has 3 1/2” diameter cutout
Description

Part Number

bow light

LEDPUBL

water run off cup

LEDPUBLWC

Flange Mount LED Lighting
• Not certified for use as nagivation lights
• Housing is machined from billet aluminum
• Environmentally sealed
• Bright LED can illuminate engine compartments
Description

Part Number

red

LEDR

green

LEDG

white

LEDW

99

LED Navigation Lights
These Livorsi LED nav lights only consume 1/10th of an amp at 14
volts. This means a longer life and less rigging time replacing lights.
These lights are to be used on any vessel up to 65 feet and have a
visibility of 2 nautical miles.
Designed to be mounted on a vertical surface, to allow the light
pattern to be unobstructed from view.

•
•
•
•
•
•
•
•

Visible for 2 nautical miles
For use on boats up to 65 feet
Marine grade 316 stainless steel
Available for 12 or 24 volt systems
Completely waterproof, environmentally sealed
NMMA accepted
USCG approved for 2 nautical miles
Meets ABYC standards
Description

Part Number

port - red

LEDNL2R

starboard - green

LEDNL2G

adapter plate

LEDNLAP

LEDNLAP
8” L x 2 1/4” W x 1/16” thick

100

ABYC Section A-16: The starboard sidelight
showing green, and the port sidelight showing red,
from dead ahead to 22.5° abaft the beam (90° +
22.5° + 112.5°) on their respective sides.
Mounting angle for navigation lights is 24°
relative to centerline of boat.

CMI’s Sound Elimination Mufflers
High Performance
CMI Sound Elimination Systems mufflers offer proven sound reduction
technology that enables boaters to operate their performance boats in
areas where sound emissions are restricted. This system should reduce
sound emissions to levels as low as 85 decibels (dB) in many applications, which is below most sound emission regulations. The mufflers are
engineered to reduce sound without restricting the exhaust or creating
unwanted backpressure, which can inhibit the engine from reaching
peak performance power.

• Mufflers can be installed on any exhaust system
with tailpipes ranging from four to six-inches in
diameter, which covers the full range of inboard
or stern drive-powered recreational and
performance boat applications up to 1200 horse
power.

• CMI Sound Elimination Systems mufflers are
Clamp-On

made from 304 series stainless steel, and have
fewer moving parts than competitive models to
ensure long-lasting durability and reliability for
nearly any application.

Clamp On High Performance
Figure
A
B
C
D
E

Description
4” x 5” under 600 HP
4.5” x 5” under 600 HP
4” X 6” over 600 HP
4.5” X 6” over 600 HP
5” X 6” all HP

Part Number
SEMSCHP4
SEMSCHP4.5
SEMSCHP4X6
SEMSCHP4.5X6
SEMSCHP5X6

Transom Mount High Performance
Figure
F

Description
4” under 600 HP

Part Number
SEMSTHP4

See diagrams on the back of this page
to find the right muffler for your application.

Transom Mount

101

CMI’s Sound Elimination Mufflers
High Performance

102

A

D

B

E

C

F

Drive Showers

Bravo Drive Cooling Shower
• Modern sleek fitted shower
• Coupled with a high volume pickup
• #10 stainless steel braided hose
Fits the following Drives

Ultimate Bravo Drive Shower
• Mounts to the drive's tilt ram
• 15 dump ports target sides & back of the drive
• Multiport system distributes continuous cool water
• Flow to top of the stern drive
• Lowers oil & bearing temperatures by 60°
• Fits all Bravo drives including: Imco & Latham steering
that mounts on back of the drive

X1, X2, X3
XR/XZ
XZ1

XZ1 w/ Intergrated top

XR

XR w/ Intergrated top

XR3

XR3 w/ Intergrated top

XR Sportmaster

XR Sportmaster w/ intergrated top

Description
Cap / Hardware

Part Number
Fits Drive Serial Number
OW250000 & up

ribbed- bolts
Part Number

OW240000 & up

BDSX

OM906878 & up

BDSU

OW240000 & up
ribbed- studs

OM05295-OM906877
OM906878 & up

BDSXR

103

Sea Strainers
SS Sea Strainer
• Stainless steel construction
• Two bungs measure 1"
• One bung measures 1/2"
• Pressure tested at 150 PSI
• 1" NPT fittings
• 60 GPM flow at 22 PSI
• High impact 1" acrylic lid
• Removable stainless steel basket with easy lift handle
• Optional floor mount brackets & fittings available

Description

Part Number

same side bungs

SS5SS

straight through bungs

SS5ST

GSSFS

GSSF90

GSSF45

SSFMB

104

Description
straight fitting

Part Number

90° slip on fitting

GSSF90

45° fitting

GSSF45

floor mount brackets

SSFMB

GSSFS

Optima Battery Boxes
Anodized Battery Box
• Machined from billet aluminum
• Black anodized finish is non-corrosive
• Box cover has a slip resistant surface
• Can be stringer mounted
• Measures: 11 15/16 in. L x 8 in. W x 6 5/8 in. H
Description

Part Number

box and cover - black only

BBBO34A

Powder Coat Finish
• Machined from billet aluminum
• Corrosive resistand polish or powder coated finish
• Optional cover available
• Can be stringer mounted
• 11-15/16” L x 8” W x 6 5/8” H
• Private Label available on cover
Description

Part Number

box

BBBO + color

cover

BBBCO + color

105

Fire Extinguisher and Mounting Hardware
Bar Mount
• Machined of billet aluminum
• Fits 1 1/2”, 1 3/4” and 2” tubing
• Black powder coat finish only
• Quick release pin

Flat Mount
• Machined of billet aluminum
• Available in powder coat colors or a clear coat
• Quick release pin

Fire Extinguisher
• Encased in marine approved chrome
• Dry ABC extinguisher
• 2 1/2 lbs, refillable
• Extinguisher and mounts are sold separately

Description

Part Number

fire extinguisher

FE

bar mount

FEBMKBK

flat mount

FEMBK

Grab Handles

Aluminum

Steel

106

11 3/4” overall (10 1/2” center to center)

GHSSS11 + color

6 15/16” overall

GHAS7 + color

11 7/16” overall

GHAS12 + color

Beverage Holders
Stainless Steel Beverage Holders
• Fits cans, bottles and kuzis
• 304 stainless steel
• Optional fittings available
• Polish stainless steel or powder coat finish
Description

Cutout

Overall

Part Number

Stainless Steel Finish
small stainless

3 5/8”

4 1/8”

SBHS

large stainless

3 3/4”

4 1/2”

SBHL

small

3 5/8”

4 1/8”

SBHS + color

large

3 3/4”

4 1/2”

SBHL+ color

Powder Coat Finish

Drain Fittings for
3/8” straight push on

SBHFS3/8

3 /8” 90° push on

SBHF903/8

drain cap

SBHC

LED Lighted Beverage Holders
• 3 7/8” cutout, 4 3/4” overal
• Fits cans, bottles and kuzis
• 12 volt, included 12 inch harness
• Black cup, stainless steel rim
• 3/8” drain fitting
• Removable rubber

Description

Part Number

blue

LBHBL

green

LBHG

red

LBHR

107

Terms and Conditions
Livorsi Marine, Inc.
TERMS & CONDITIONS 2016
WARRANTY
All Livorsi Marine® products carry a limited one year warranty for repair or replacement at Livorsi's discretion. All Livorsi Marine® products are warranted to be free of defects in
material and workmanship. Users/Customers of Livorsi Marine®/Livorsi® products agree not to hold Livorsi Marine, Inc., its owner or employees responsible for any damages
occurring by improper installation or use of Livorsi Marine® or Livorsi® products. The company, owner or its employees will not be liable for more than the cost of the original
product and in no event will Livorsi Marine® or Livorsi® be liable for special, indirect or consequential damages of any kind whatsoever.
RETURNS
All returns purchased directly through Livorsi Marine must have an assigned RMA Number (Returns Merchandise Authorization). Please call customer service at 847-752-2700 or
email returns@livorsi.com to receive an RMA Number. Please allow at least 24 business hours for a return call or email. Any packages without a RMA number will be refused.
For warranty questions please call customer service at 847-752-2700 or email returns@livorsi.com. Livorsi Marine will not accept returns or warranty items unless purchased
directly from Livorsi Marine. For items purchased through a distributor or dealer, call the distributor or dealer for return or warranty questions and issues. For further questions or
technical help visit www.livorsi.com and click on Tech Tools or call customer service at 847-752-2700
A minimum 15% restocking charge may apply to any returned items. Merchandise must be returned with shipping charges prepaid. Returns sent freight collect will be refused.
Please enclose a copy of the original purchase invoice with return. Livorsi Marine, Inc. will not accept returns past 60 days. Credit will not be issued on custom or private label
gauges. If a product returned to Livorsi Marine is tested and found to have no defects, the customer will be responsible for 20% restocking fee and replacement shipping costs if
applicable
.
PRODUCTS
Due to changes in technology, customer demand and company direction, products may change without notice. Check our website for updated products and availability.
Regardless of our line of products, our goals remain the same: QUALITY, OPTIONS AND AVAILABILITY!!
PAYMENT TERMS
Individuals may pay by Visa, MasterCard, American Express, Discover or cashier's check. Companies may pay by Visa, MasterCard, American Express, check, C.O.D., wire
transfer or on Net terms with prior credit approval.
PRICES
All prices are subject to change without verbal or written notice. Our price lists are intended as a guideline only. No responsibility is assumed for errors or omissions on product
or pricing information. Possession of discount price list does not guarantee those prices to customer.
ORDER PLACEMENT
You may phone 847-752-2700, fax 847-752-2415, email sales@livorsi.com or mail your orders to Livorsi Marine®, 715 Center Street, Grayslake, IL 60030. You may also e-mail
your order to sales@livorsi.com. Please be sure to include your name, address, phone number and specific ordering requests.
FREIGHT
All orders will be shipped UPS or FedEx, unless specified by customer. All orders are shipped F.O.B. Grayslake, Illinois. Any claims for shortage of product must be reported to
Livorsi Marine® within 24 hours of receipt of order. If the shipment arrives damaged, contact the shipper directly, not Livorsi Marine®. Do not return damaged product to Livorsi
Marine®.
Handling charges are based on the speed and type of shipment requested. i.e. $5 -ground, $6- 3day, $8- 2day, $10-next day, $15 International. Drop ship fees may be charged if
shipping to an address different from the billing address. An additional charge may be applied if customer requests special shipping company or instructions.
REFUSED SHIPMENTS
Shipments returned to Livorsi Marine® marked "refused" or "not in when driver called" will cause the customer's buying status to be frozen until related handling and shipping
charges are paid. Refusal of shipment does not release the customer from paying the related handling and shipping charges. Repeated refusal or returned shipments may cause
the customer's buying status to be revoked.

Toll Free: 877.548.5900
Phone: 847.752.2700
Email: sales@livorsi.com

www.livorsi.com
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : ecraig
Create Date                     : 2016:05:17 15:42:52-05:00
Modify Date                     : 2016:05:17 15:54:24-05:00
Subject                         : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29
Producer                        : GPL Ghostscript 9.10
Keywords                        : 
Creator Tool                    : PDFCreator Version 1.7.2
Metadata Date                   : 2016:05:17 15:54:24-05:00
Document ID                     : uuid:7204a3a9-1ecb-11e6-0000-91912cec4f50
Instance ID                     : uuid:3c6c0c0e-0695-4a85-9f79-8139462a8d21
Format                          : application/pdf
Title                           : lmi volume 18_rev5.qxd
Creator                         : ecraig
Description                     : 
Description (x-repair)          : 
Page Count                      : 109
EXIF Metadata provided by EXIF.tools

Navigation menu