MBRS130LT3 Datasheet. Www.s Manuals.com. On

User Manual: Marking of electronic components, SMD Codes 1B, 1B-, 1B18, 1B20, 1B25, 1B30, 1B35, 1B40, 1B45, 1B50, 1B55, 1B60, 1B=***, 1BL3, 1BW, 1BZ, 1Bp, 1Bt. Datasheets BC846B, BC846BT, BC846BW, DAP202UM, FMMT2222, MBRS130LT3, MT501, RT9715CGB.

Open the PDF directly: View PDF .
Page Count: 5

Download
Open PDF In Browser	View PDF

MBRS130LT3
Preferred Device

Schottky Power Rectifier
Surface Mount Power Package
This device employs the Schottky Barrier principle in a large area
metal−to−silicon power diode. State−of−the−art geometry features
epitaxial construction with oxide passivation and metal overlay
contact. Ideally suited for low voltage, high frequency rectification,
or as free wheeling and polarity protection diodes, in surface mount
applications where compact size and weight are critical to the
system.
Features

•
•
•
•
•

http://onsemi.com

SCHOTTKY BARRIER
RECTIFIER
1.0 AMPERE
30 VOLTS

Very Low Forward Voltage Drop (0.395 Volts Max @ 1.0 A, TJ = 25°C)
Small Compact Surface Mountable Package with J−Bend Leads
Highly Stable Oxide Passivated Junction
Guard−Ring for Stress Protection
Pb−Free Package is Available

Mechanical Characteristics

SMB
CASE 403A
PLASTIC

• Case: Epoxy, Molded
• Weight: 95 mg (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal

MARKING DIAGRAM

Leads are Readily Solderable

• Lead and Mounting Surface Temperature for Soldering Purposes:
•

260°C Max. for 10 Seconds
Cathode Polarity Band

AYWW
1BL3G
G

MAXIMUM RATINGS
Symbol

Value

Unit

Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage

Rating

VRRM
VRWM
VR

30

V

Average Rectified Forward Current
TL = 120°C
TL = 110°C

IF(AV)

Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)

IFSM

Operating Junction Temperature

A
1.0
2.0
40

A

ORDERING INFORMATION
TJ

−65 to +125

°C

Rating

Symbol

Value

Unit

RqJL

12

°C/W

Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.

© Semiconductor Components Industries, LLC, 2005

August, 2005 − Rev. 6

Device
MBRS130LT3

THERMAL CHARACTERISTICS

Thermal Resistance,
Junction−to−Lead (TL = 25°C)

1BL3
= Specific Device Code
A
= Assembly Location
Y
= Year
WW
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)

1

MBRS130LT3G

Package

Shipping †

SMB

2500/Tape & Reel

SMB
(Pb−Free)

2500/Tape & Reel

†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Preferred devices are recommended choices for future use
and best overall value.

Publication Order Number:
MBRS130LT3/D

MBRS130LT3
ELECTRICAL CHARACTERISTICS
Characteristic

Symbol

Maximum Instantaneous Forward Voltage (Note 1)
(iF = 1.0 A, TJ = 25°C)
(iF = 2.0 A, TJ = 25°C)

VF

Maximum Instantaneous Reverse Current (Note 1)
(Rated dc Voltage, TJ = 25°C)
(Rated dc Voltage, TJ = 100°C)

IR

Value

Unit
V

0.395
0.445
mA
1.0
10

10

TJ = 100°C

1
25°C

0.1
0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

VF, INSTANTANEOUS VOLTAGE (V)

IF, MAXIMUM INSTANTANEOUS FORWARD
CURRENT (A)

IF, INSTANTANEOUS FORWARD CURRENT
(A)

1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2%.
10

TJ = 100°C

1

25°C

0.1
0

0.1

100
10
TJ = 100°C
25°C

0.1
0.01
0.001

0

3

6

9

12

15

18

21

24

0.3

0.4

0.5

0.6

0.7

Figure 2. Maximum Forward Voltage

IR, IREVERSE CURRENT (mA)

IR, IREVERSE CURRENT (mA)

Figure 1. Typical Forward Voltage

1.0

0.2

VF, MAXIMUM INSTANTANEOUS VOLTAGE (V)

27

100
10
1.0

25°C

0.1
0.01
0.001

30

TJ = 100°C

0

3

6

9

12

15

18

21

24

27

VR, REVERSE VOLTAGE (V)

VR, REVERSE VOLTAGE (V)

Figure 3. Typical Reverse Leakage Current

Figure 4. Typical Maximum Reverse Leakage
Curent

http://onsemi.com
2

30

PF(AV), AVERAGE POWER DISSIPATION (W)

2
1.8
DC

1.6
1.4
1.2

SQUARE WAVE

1
0.8
0.6
0.4
0.2
0
100

105

110

115

120

125

130

TC, CASE TEMPERATURE (°C)

0.9
0.8
0.7
0.6
0.5
SQUARE
0.4
0.3
DC

0.2
0.1
0
0

0.2

0.4

0.6

NOTE: TYPICAL CAPACITANCE
AT 0 V = 290 pF

350
300
250
200
150
100
50
0

4

1

1.2

1.4 1.6

Figure 6. Typical Power Dissipation

400

0

0.8

IF(AV), AVERAGE FORWARD CURRENT (A)

Figure 5. Current Derating (Case)

C, CAPACITANCE (pF)

IF(AV), AVERAGE FORWARD CURRENT (A)

MBRS130LT3

8

12

16

20

24

VR, REVERSE VOLTAGE (VOLTS)

Figure 7. Typical Capacitance

http://onsemi.com
3

28

32

MBRS130LT3
PACKAGE DIMENSIONS

SMB
PLASTIC PACKAGE
CASE 403A−03
ISSUE E
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P.

HE
E

b

DIM
A
A1
b
c
D
E
HE
L
L1

D

MIN
1.90
0.05
1.96
0.15
3.30
4.06
5.21
0.76

MILLIMETERS
NOM
MAX
2.13
2.41
0.10
0.15
2.03
2.11
0.23
0.30
3.56
3.81
4.32
4.57
5.44
5.59
1.02
1.27
0.51 REF

MIN
0.075
0.002
0.077
0.006
0.130
0.160
0.205
0.030

INCHES
NOM
0.084
0.004
0.080
0.009
0.140
0.170
0.214
0.040
0.020 REF

MAX
0.095
0.006
0.083
0.012
0.150
0.180
0.220
0.050

A

L

L1

A1

c

SOLDERING FOOTPRINT*
2.261
0.089

2.743
0.108

2.159
0.085

SCALE 8:1

mm Ǔ
ǒinches

*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.

ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
Literature Distribution Center for ON Semiconductor
USA/Canada
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Phone: 81−3−5773−3850
Email: orderlit@onsemi.com

http://onsemi.com
4

ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.

MBRS130LT3/D

www.s-manuals.com



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : BroadVision, Inc.
Modify Date                     : 2012:11:07 21:12:36+02:00
Create Date                     : 2005:08:07 11:50:16-07:00
Metadata Date                   : 2012:11:07 21:12:36+02:00
Format                          : application/pdf
Title                           : MBRS130LT3 - Datasheet. www.s-manuals.com.
Creator                         : 
Subject                         : MBRS130LT3 - Datasheet. www.s-manuals.com.
Document ID                     : uuid:399f5a2f-7abe-4a60-83a2-038621cfc340
Instance ID                     : uuid:c6ff13d5-d3af-4db1-bb0b-72f5fff9837a
Page Count                      : 5
Keywords                        : MBRS130LT3, -, Datasheet., www.s-manuals.com.

EXIF Metadata provided by EXIF.tools