MBRS130LT3 Datasheet. Www.s Manuals.com. On
User Manual: Marking of electronic components, SMD Codes 1B, 1B-, 1B18, 1B20, 1B25, 1B30, 1B35, 1B40, 1B45, 1B50, 1B55, 1B60, 1B=***, 1BL3, 1BW, 1BZ, 1Bp, 1Bt. Datasheets BC846B, BC846BT, BC846BW, DAP202UM, FMMT2222, MBRS130LT3, MT501, RT9715CGB.
Open the PDF directly: View PDF 
.
Page Count: 5
© Semiconductor Components Industries, LLC, 2005
August, 2005 − Rev. 6 1Publication Order Number:
MBRS130LT3/D
MBRS130LT3
Preferred Device
Schottky Power Rectifier
Surface Mount Power Package
This device employs the Schottky Barrier principle in a large area
metal−to−silicon power diode. State−of−the−art geometry features
epitaxial construction with oxide passivation and metal overlay
contact. Ideally suited for low voltage, high frequency rectification,
or as free wheeling and polarity protection diodes, in surface mount
applications where compact size and weight are critical to the
system.
Features
•Very Low Forward Voltage Drop (0.395 Volts Max @ 1.0 A, TJ = 25°C)
•Small Compact Surface Mountable Package with J−Bend Leads
•Highly Stable Oxide Passivated Junction
•Guard−Ring for Stress Protection
•Pb−Free Package is Available
Mechanical Characteristics
•Case: Epoxy, Molded
•Weight: 95 mg (approximately)
•Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
•Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
•Cathode Polarity Band
MAXIMUM RATINGS
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
30 V
Average Rectified Forward Current
TL = 120°C
TL = 110°C
IF(AV) 1.0
2.0
A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
IFSM 40 A
Operating Junction Temperature TJ−65 to +125 °C
THERMAL CHARACTERISTICS
Rating Symbol Value Unit
Thermal Resistance,
Junction−to−Lead (TL = 25°C) RqJL 12 °C/W
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
http://onsemi.com
SMB
CASE 403A
PLASTIC
SCHOTTKY BARRIER
RECTIFIER
1.0 AMPERE
30 VOLTS
Device Package Shipping†
ORDERING INFORMATION
MBRS130LT3 SMB 2500/Tape & Reel
Preferred devices are recommended choices for future use
and best overall value.
MBRS130LT3G SMB
(Pb−Free) 2500/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
s
Brochure, BRD8011/D.
MARKING DIAGRAM
1BL3 = Specific Device Code
A = Assembly Location
Y = Year
WW = Work Week
G= Pb−Free Package
(Note: Microdot may be in either location
)
AYWW
1BL3G
G
MBRS130LT3
http://onsemi.com
2
ELECTRICAL CHARACTERISTICS
Characteristic Symbol Value Unit
Maximum Instantaneous Forward Voltage (Note 1)
(iF = 1.0 A, TJ = 25°C)
(iF = 2.0 A, TJ = 25°C)
VF0.395
0.445
V
Maximum Instantaneous Reverse Current (Note 1)
(Rated dc Voltage, TJ = 25°C)
(Rated dc Voltage, TJ = 100°C)
IR1.0
10
mA
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤2%.
100
10
1.0
0.1
0.01
0.001
0 3 6 9 12 15 18 21 24 27 30
VR, REVERSE VOLTAGE (V)
VF, INSTANTANEOUS VOLTAGE (V)
Figure 1. Typical Forward Voltage Figure 2. Maximum Forward Voltage
0.1
1
10
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
I
F
, INSTANTANEOUS FORWARD CURRENT
(A)
TJ = 100°C
25°C
I
R
, IREVERSE CURRENT (mA)
TJ = 100°C
25°C
0 3 6 9 12 15 18 21 24 27 30
VR, REVERSE VOLTAGE (V)
IR, IREVERSE CURRENT (mA)
TJ = 100°C
25°C
Figure 3. Typical Reverse Leakage Current Figure 4. Typical Maximum Reverse Leakage
Curent
100
10
1.0
0.1
0.01
0.001
0.1
1
10
0 0.1 0.2 0.3 0.4 0.5 0.6 0.
7
IF, MAXIMUM INSTANTANEOUS FORWARD
CURRENT (A)
TJ = 100°C
25°C
VF, MAXIMUM INSTANTANEOUS VOLTAGE (V)
MBRS130LT3
http://onsemi.com
3
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
100 105 110 115 120 125 130
TC, CASE TEMPERATURE (°C)
Figure 5. Current Derating (Case)
IF(AV), AVERAGE FORWARD CURRENT (A)
SQUARE WAVE
DC
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
IF(AV), AVERAGE FORWARD CURRENT (A)
Figure 6. Typical Power Dissipation
PF(AV), AVERAGE POWER DISSIPATION (W)
SQUARE
DC
C, CAPACITANCE (pF)
400
350
300
250
200
150
100
50
0
0 4 8 121620242832
VR, REVERSE VOLTAGE (VOLTS)
Figure 7. Typical Capacitance
NOTE: TYPICAL CAPACITANCE
AT 0 V = 290 pF
MBRS130LT3
http://onsemi.com
4
PACKAGE DIMENSIONS
SMB
PLASTIC PACKAGE
CASE 403A−03
ISSUE E
E
bD
c
L1
L
A
A1
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P.
DIM
AMIN NOM MAX MIN
MILLIMETERS
1.90 2.13 2.41 0.075
INCHES
A1 0.05 0.10 0.15 0.002
b1.96 2.03 2.11 0.077
c0.15 0.23 0.30 0.006
D3.30 3.56 3.81 0.130
E4.06 4.32 4.57 0.160
L0.76 1.02 1.27 0.030
0.084 0.095
0.004 0.006
0.080 0.083
0.009 0.012
0.140 0.150
0.170 0.180
0.040 0.050
NOM MAX
5.21 5.44 5.59 0.205 0.214 0.220
HE
0.51 REF 0.020 REF
D
L1
HE
2.261
0.089
2.743
0.108
2.159
0.085 ǒmm
inchesǓ
SCALE 8:1
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
MBRS130LT3/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.
