186 Series Meritor 180 185 380 Drive Axle Parts For Single And Tandem Axles
User Manual: 186 Series
Open the PDF directly: View PDF 
.
Page Count: 73
| Download | |
| Open PDF In Browser | View PDF |
18 0 , 18 5 , 18 6 a n d 3 8 0 S e r i e s
Dr i v e A x l e Pa r t s F O R
S i n g l e A x l e s a n d Ta n d e m A x l e s
PB-9108
Revised 10/08
HOW TO USE THIS CATALOG
y
There are 11 basic carriers covered in this catalog:
3200-C-1381
3200-U-1399
3200-M-1625
3200-J-1752
3200-K-1753
3200-W-1791
3200-J-1804
3200-M-1833
3200-S-1839
3200-A-1899
3200-L-1910
Major assembly differences in a carrier are indicated by the different assembly level numbers in front
of the base carrier number, for example, A1-3200-J-1804 and A4-3200-J-1804.
NOTE: The carriers listed in this catalog do not include yokes. A yoke is a major assembly difference, so,
a carrier sold with a yoke has a different assembly level number than the same carrier without the yoke.
y
The charts for carriers, output shafts, and housings include the following information:
y
y
y
y
y
y
y
y
An expoded view of each assembly, keyed to the parts list.
A description of each part.
Parts that are sold as assemblies that include other parts.
Which carriers or axle models the part is used on.
The quantity of the part used on the carrier or axle.
The part number of each part.
Whether the part is available in a kit.
Carrier parts:
Determine which chart and figure (1 or 2) applies to your carrier by using the following sources of information.
y
y
y
Identification tag installed on the carrier.
Axle Models-Carriers-Features Chart.
Pictures and descriptions of the carriers inside the front cover and at the beginning of Chart 1 and Chart 2.
y
Output (thru) shafts:
This chart covers the output shafts for the forward axles of all tandems. Note that the output shaft assembly
or its components are only sold as separate items. The output shaft is not included with the purchase of a carrier
or housing.
y
Housing Assemblies and Wheel End Parts:
This chart covers the housing assemblies and wheel end parts for all axles. The parts are listed according to
axle models that are used on 180 and 380 series axles.
y
Axle shafts:
The axle shafts are grouped in sets (L.H. and R.H.) according to the axle models they are used on. Many axle
shafts are used on more than one axle model. The axle shafts are also listed by part number with dimensions.
y
Yokes and Flanges:
There are four charts that cover full round bearing yokes, wing bearing yokes, Easy Service yokes and flanges.
Each chart lists the yokes or flanges used on each model, the yokes and flanges are listed by dimensions.
y
Kits:
The first chart in this section lists all the kits available for each model axle and carrier. Following that chart,
the kits are organized in numerical order.
y
Numerical Parts Index:
This section lists every part number along with the page(s) on which the part is listed.
STANDARD CARRIER SUPERCESSION LIST
ORIGINAL
PART NUMBER
A54-3200-U-1399
A61-3200-U-1399
A42-3200-M-1625
A53-3200-M-1625
A58-3200-M-1625
A59-3200-M-1625
A60-3200-M-1625
A63-3200-M-1625
A66-3200-M-1625
A83-3200-M-1625
B8-3200-M-1625
REPLACEMENT
PART NUMBER
A1-3200-A-1899
A1-3200-J-1804
A84-3200-M-1833
A58-3200-M-1833
A73-3200-M-1833
A12-3200-M-1833
A74-3200-M-1833
A76-3200-M-1833
A17-3200-M-1833
A36-3200-M-1833
A97-3200-M-1833
ORIGINAL
PART NUMBER
A-3200-K-1753
A1-3200-K-1753
A1-3200-W-1791
A11-3200-M-1833
A13-3200-M-1833
A15-3200-M-1833
A48-3200-M-1833
A1-3200-J-1804
A1-3200-M-1899
B5-3200-A-1899
B8-3200-A-1899
REPLACEMENT
PART NUMBER
A-3200-J-1752
A1-3200-J-1752
A1-3200-A-1899
A73-3200-M-1833
A74-3200-M-1833
A76-3200-M-1833
A84-3200-M-1833
A1-3200-J-1752
A-3200-J-1752
A-3200-K-1753
A1-3200-K-1753
The part number supercessions listed here reflect product improvements made in several key areas.
Several of these product improvements are non-interchangeable at the component level, in these
cases kits have been developed to ease your transition to the new designs.
The rear-rear and single axle carriers with main diff. lock now have a screw-in type shifter.
The forward-rear carriers with pump now have an internal pump that is also used on the
145 and 160 family axles.
The forward-rear carriers also now have a screw-in type I.A.D. lock shift cylinder.
Rear Drive Axles
Model Numbers and Designations
Axle models are identified by a letter and number system.
The letters and numbers give important information about the
specific axle model.
The first seven positions of the designation identify a basic axle
model, while the second group of letters and numbers identify
particular specifications.
Nominal Axle Load Rating (GAWR):
In thousands of pounds. Individual forward
and rear axles of a tandem set (D, N, P, R)
are rated as single axles. A tandem set (T) is
rated as the combination of the two axles and
a tridem set (Z) as the combination of the
three axles.
Gearing Type
1 - Single Speed
2 - Two Speed
3 - Helical Double Reduction
4 - Salisbury Single Speed
5 - Planetary Double Reduction
6 - Hub Reduction
RR 20 1 8 0
Manufacturing Location
A - Australia
B - Brazil (Braseixos)
C - India
D - Mexico (Dirona)
E - Europe (C.V.C.)
M - Europe (Maudsley)
N - U.S.A.
Main Differential Nest Type
B - Special Differential
C - Driver Controlled Differential Lock
F - Standard Differential
H - High Traction® Differential
N - NoSPIN® Differential
N C Q F 123
Hub Type (See Note 3)
A - Aluminum
F - Ferrous
N - None
Axle Type
C - Single Rear Drive Axle, Coach
D - Forward-Rear Axle of a Drive Tandem
with Inter-Axle Differential
N - Forward-Rear Axle of a Drive Tandem or
Tridem without Inter-Axle Differential
P - Forward-Rear Axle of a Drive Tandem
with Inter-Axle Differential and Pump
R - Rear-Rear Axle of a Drive Tandem
S - Single Rear Drive Axle
T - Tandem Drive Axle Set
Z - Tridem Drive Axle Set
Brake Type
C - Dura-Master® Air Disc Brake
D - RDA Stopmaster® Wedge Brake
(Dual Air Chambers)
E - RDH Stopmaster® Wedge Brake
(Dual Hydraulic Cylinders)
F - RSH Stopmaster® Wedge Brake
(Single Hydraulic Cylinder)
L - QPlus® Cam Brake
N - None
P - Cam-Master® "P" Series Cam Brake
Q - Cam-Master® "Q" Series Cam Brake
S - RSA Stopmaster® Wedge Brake
(Single Air Chamber)
T - Cam-Master® "T" Series Cam Brake
W - Cam-Master® "W" Series Cam Brake
Axle Specification Number
Identifies specific customer axle
configurations (variations from the original
axle design). For information about the
variation, see the Bill of Material for that
specific axle model.
Carrier Type
Carrier size. Larger numbers
indicate a higher GCW rated
carrier: i.e., larger ring gear, etc.
(Also see Tridem Axle Note 2
below.)
NOTE 1:
If a complete axle designation is not required, use the first seven positions
of the model designation to identify the basic axle model.
EXAMPLES OF BASIC AXLE MODELS:
RS 17 140 - Single Rear Drive, 17,000 lb., Single Speed, 15" Ring Gear,
140 Carrier Model.
RT 48 380 - Tandem Drive Axle Set, 48,000 lb., Helical Double Reduction,
19.62" Ring Gear, 380 Carrier Model.
RZ 60 164 - Tridem Drive Axle Set, 60,000 lb., Single Speed, Includes a
150 Series Forward Rear or First Axle and a 145 Series
Tandem Axle Set as the Second and Third Axles.
Axle Design Variation
Indicates axle design level or
variation, (e.g., RS 23 161 has a
thicker wall housing than the RS
23 160). For information see the
Bill of Material for that specific
axle model. (Also see Tridem
Axle Note 2 below.)
NOTE 2, FOR TRIDEM AXLES ONLY:
For a Tridem Drive Axle Set (RZ), the
number in the sixth position designates
the carrier in the first axle. The number
in the seventh position designates the
carriers in the second and third axles.
NOTE 3:
Some axle designations or
specifications do not have a hub
type code.
AXLE MODELS - CARRIERS - FEATURES
180/185/186 Series Single Reduction Axles
380 Series Double Reduction Axles
RS-23-180/185/186
RS-26-180/185
RS-30-180/185
RS-23-380
RS-26-380
RS-30-380
RS-38-380
RT-48-180/185
RT-52-180/185
RT-58-180/185
RT-48-380
RT-52-380
RT-58-380
RT-70-380
AXLE MODELS
Single Axles
(single reduction)
CARRIERS
A1-3200-J-1752 (1)
A-3200-J-1752 (1)
Single Axles
(double reduction)
2.35 - 46 axle spline
Single Axles
(double reduction)
2.56 - 50 axle spline
Forward
RP-24-180/185
RP-26-180/185
RP-29-180/185
Rear
RR-24-180
RR-26-180/185
RR-29-180/185
Forward
RP-24-380
2.35-46T RP-26-380
RP-29-380
Rear
RR-24-380
2.35-46T RR-26-380
RR-29-380
A17-3200-M-1833
Forward
2.56-50T
Rear
2.56-50T
CARRIER
INTER- MAIN
NO
PARTS
AXLE DIFF. SPIN®
OIL
CHART
DIFF. LOCK DIFF. PUMP NUMBER
2
X
2
1
A58-3200-M-1833
A12-3200-M-1833
A84-3200-M-1833
A74-3200-M-1833
X
X
X
A1-3200-J-1752 (1)
A-3200-J-1752 (1)
A76-3200-M-1833
X
1
1
X
X
2
2
X
X
X
A17-3200-M-1833
A73-3200-M-1833
RN-35-380
RR-35-380
A97-3200-M-1833
A58-3200-M-1833
A12-3200-M-1833
1
1
A36-3200-M-1833
RP-35-380
1
1
X
X
X
1
X
1
1
1
1
NOTE: All carriers are less yoke.
®NoSPIN is a registered trademark of Tractech, a division of Dyneer Corp.
(1) These are 185/186 carriers and require KIT 4744 (carrier to axle housing fasteners) if replacing an 1804 or 1899
carrier with the 1752 or 1753 carrier.
TABLE OF CONTENTS
FORWARD CARRIERS OF ALL TANDEM AXLES & REAR CARRIERS OF
380 SERIES (DOUBLE REDUCTION) AXLES.......................................... 1
CARRIERS FOR 180/185/186 SERIES SINGLE AXLES & REARS OF
180/185/186 SERIES TANDEM AXLES .................................................... 8
OUTPUT (THRU) SHAFT ASSEMBLY PARTS...................................................... 16
HOUSING ASSEMBLY PARTS .............................................................................. 17
AXLE SHAFT SETS FOR 180/185/186/380 SERIES AXLES ................................ 19
AXLE SHAFTS ....................................................................................................... 21
ROUND BEARING TYPE YOKES .......................................................................... 24
EASY SERVICE (STRAP) TYPE YOKES............................................................... 25
WING BEARING TYPE YOKES.............................................................................. 26
COMPANION FLANGES......................................................................................... 27
AXLE MODEL TO CARRIER KIT CROSS REFERENCE ...................................... 28
SERVICE KITS ........................................................................................................ 32
NUMERICAL PARTS LISTING ............................................................................... 53
i
CHART 1
FORWARD CARRIERS OF ALL TANDEM AXLES
REAR CARRIERS OF 380 SERIES (DOUBLE-REDUCTION) AXLES
(Use with Figures 1 and 1A)
VISUAL IDENTIFICATION OF CARRIERS
ii
FORWARD CARRIER WITH
FORWARD CARRIER WITHOUT
REAR CARRIER
IAD AND OIL PUMP
IAD OR OIL PUMP
WITH OIL PUMP
A42-3200-M-1625
A59-3200-M-1625
A83-3200-M-1625
A58-3200-M-1625
A66-3200-M-1625
A36-3200-M-1833
A60-3200-M-1625
B8-3200-M-1625
A63-3200-M-1625
B24-3200-M-1625
A11-3200-M-1833
A12-3200-M-1833
A13-3200-M-1833
A13-3200-M-1833
A15-3200-M-1833
A31-3200-M-1833
A73-3200-M-1833
REAR CARRIER
A74-3200-M-1833
WITHOUT OIL PUMP
A76-3200-M-1833
A53-3200-M-1625
A84-3200-M-1833
A58-3200-M-1833
FORWARD CARRIERS OF ALL TANDEM AXLES
REAR CARRIERS OF 380 SERIES (DOUBLE-REDUCTION) AXLES
ITEM
DESCRIPTION
REMARKS
CARRIER
QTY
PART NUMBER
NOTE: ITEMS 1-42 ARE COMMON TO FWD 180 & 380 AND REAR 380
1
Capscrew - lock plate
All
4
S-256A-2
2
Washer - lock plate
All
4
1229-E-1669
3
Lock Plate - adjusting ring
All
2
1220-S-1085
4
Adjusting rings - differential bearing
All
1
2214-M-91
5
Cups - differential bearing
RH
2214-K-89
LH
RH - current
1
RH - old style
LH
6
Cones - differential bearing
KIT 4446 (1)
KIT 4445 (1)
All
RH - current
1
RH - old style
LH
52618P
52387P
KIT 4446 (1)
KIT 4445 (1)
All
7
Nut - main differential case
All
12
1227-M-1339
8
Washer - main differential case
All
12
1229-W-1557
9
Nut - gear to differential case
All
16
1227-N-1340
10
Washer - gear to differential case
All
16
1229-U-1555
All
16
15-X-1700
All
1
A-3235-T-1944
11
Incl. in KIT 2342
Bolt - gear to differential case
12, 7, 8,
Case assembly -
Sgl. reduction 3.73
Dbl. reduction 5.52
19
main differential
Sgl. reduction 4.10
Dbl. reduction 6.07
Sgl. reduction 4.30
Dbl. reduction 6.37
Sgl. reduction 4.56
Dbl. reduction 6.75
Sgl. reduction 4.89
Dbl. reduction 7.24
Sgl. reduction 5.29
Dbl. reduction 7.83
Sgl. reduction 5.38
Dbl. reduction 7.96
Sgl. reduction 6.14
Dbl. reduction 9.14
Sgl. reduction 6.83
Dbl. reduction 10.12
Sgl. reduction 7.17
Dbl. reduction 10.62
12, 7, 8,
Case & nest assy -
Sgl. reduction 3.73
Dbl. reduction 5.52
14, 15,
main differential
A-3235-U-1945
All others
1
A6-3235-T-1944
Sgl. reduction 4.10
Dbl. reduction 6.07
RT-70-380
16, 17,
Sgl. reduction 4.30
Dbl. reduction 6.37
2-1/2" -50 spline
18, 19
Sgl. reduction 4.56
Dbl. reduction 6.75
All others
A6-3235-U-1945
Sgl. reduction 4.89
Dbl. reduction 7.24
RT-70-380
A7-3235-U-1945
Sgl. reduction 5.29
Dbl. reduction 7.83
2-1/2" -50 spline
Sgl. reduction 5.38
Dbl. reduction 7.96
Sgl. reduction 6.14
Dbl. reduction 9.14
Sgl. reduction 6.83
Dbl. reduction 10.12
Sgl. reduction 7.17
Dbl. reduction 10.62
12, 7, 8,
Case & NoSPIN
Sgl. reduction 3.73
Dbl. reduction 5.52
15A, 19
assy - main
Sgl. reduction 4.10
Dbl. reduction 6.07
RT-70-380
differential
Sgl. reduction 4.30
Dbl. reduction 6.37
2-1/2" -50 spline
(1)
All others
A7-3235-T-1944
1
A5-3235-T-1944
A3-3235-T-1944
Update kit
1
FORWARD CARRIERS OF ALL TANDEM AXLES
REAR CARRIERS OF 380 SERIES (DOUBLE-REDUCTION) AXLES
ITEM
DESCRIPTION
REMARKS
CARRIER
QTY
1
12, 7, 8,
Case & NoSPIN
Sgl. reduction 4.56
Dbl. reduction 6.75
All others
15A, 19
assy - main
Sgl. reduction 4.89
Dbl. reduction 7.24
RT-70-380
differential
Sgl. reduction 5.29
Dbl. reduction 7.83
2-1/2" -50 spline
Sgl. reduction 5.38
Dbl. reduction 7.96
13, 42
Sgl. reduction 6.14
Dbl. reduction 9.14
Sgl. reduction 6.83
Dbl. reduction 10.12
A5-3235-U-1945
A3-3235-U-1945
Sgl. reduction 7.17
Dbl. reduction 10.62
Drive gear, pinion
Sgl. reduction 3.73
Dbl. reduction 5.52
& nut assembly
Sgl. reduction 4.10
Dbl. reduction 6.07
B-40354-4
Sgl. reduction 4.30
Dbl. reduction 6.37
B-40356-4
Sgl. reduction 4.56
Dbl. reduction 6.75
B-40358-4
Sgl. reduction 4.89
Dbl. reduction 7.24
B-40360-4
Sgl. reduction 5.29
Dbl. reduction 7.83
B-40312-4
Sgl. reduction 5.38
Dbl. reduction 7.96
B-40362-4
Sgl. reduction 6.14
Dbl. reduction 9.14
B-40364-4
Sgl. reduction 6.83
Dbl. reduction 10.12
B-40366-4
Sgl. reduction 7.17
Dbl. reduction 10.62
B-40368-4
14
Thrust washer - side gear
15
Side gear - differential
All
All
2.35" -46 spline
1
NoSPIN assembly
B-40352-4
2
1229-L-3002
2
2234-C-1069
2234-G-1229
2.56" -50 spline
15A
PART NUMBER
2.35" -46 spline
1
A-3230-E-1045
A-3230-N-1028
2.56" -50 spline
16
Thrust washer - differential pinion
All
4
1229-D-992
17
Gear - differential pinion
All
4
2233-T-1112
18
Spider (cross) - differential
All
1
3278-Q-381
19
Bolt - main differential case
Pre 4/02
8
15-X-1699
4
15-X-1698
After 4/02
12
15-X-1699 (2)
All
1
A2-3200-M-1833
All
2
1246-M-455
Long
Short
20, 29,
Differential carrier & cap assembly
30
21
One pc. bearing assy.
A2-3200-M-1625
Two pc. bearing assy.
Dowel - helical gear cover to carrier
22
Plug - oil filter
All
1
P-112
23
Screen assembly - oil filter
All
1
A-1199-Z-3328
24
Capscrew - carrier to housing
Ref. only - not incl. with
9
S-21016-2
25
Washer - carrier to housing
carrier. See housing
14
1229-U-1503
26
Nut - carrier to housing stud
section for exploded
5
N-110-1
27
Nut - thrust screw jam
All
1
1227-D-472
28
Screw - drive gear thrust
All
1
15-X-1167
29
Washer - differential bearing cap
All
4
1229-M-1625
30
Capscrew - differential bearing cap
All
4
S-11440-2
1
1229-L-1624
view of housing.
31
Snap ring - spigot
One piece bearing
bearing
All other ratios
Sgl. reduction 6.83
Dbl. reduction 10.12
Sgl. reduction 7.17
Dbl. reduction 10.62
Two piece bearing
(2) Plain half in diff. case changed from 3235-U-1971 to 3235-C-2395.
2
1229-K-1623
1229-T-4076
FORWARD CARRIERS OF ALL TANDEM AXLES
REAR CARRIERS OF 380 SERIES (DOUBLE-REDUCTION) AXLES
ITEM
32, 31
DESCRIPTION
Bearing - drive
Current design one
pinion spigot (inner
piece bearing
& outer race plus
snap ring)
Old design two pc.
REMARKS
CARRIER
QTY
1
All other ratios
Sgl. reduction 6.83
Dbl. reduction 10.12
Sgl. reduction 7.17
Dbl. reduction 10.62
PART NUMBER
1228-S-1267
1228-A-261
All other ratios
A5-1228-R-1266
brg. Incl. Item 31
Sgl. reduction 6.83
Dbl. reduction 10.12
(1229-T-4076 snap
Sgl. reduction 7.17
Dbl. reduction 10.62
A4-1228-R-1266
ring).
33
Cones - drive pinion inner & outer bearing
All
2
78250AC
34
Cups - drive pinion inner & outer bearing
All
2
78551
All
35
36
37, 34
38
Spacers - pinion
.326" /8.28mm
Incl. in KITS 1554,
Use 2
2203-U-7899
bearing
.327" /8.31mm
RP180 1625, RP380 &
as
2203-V-7900
.328" /8.31mm
RR380
req.
2203-W-7901
.329" /8.33mm
2203-X-7902
.330" /8.38mm
2203-Y-7903
.331" /8.41mm
2203-Z-7904
.332" /8.43mm
2203-A-7905
.338" /8.59mm
2203-B-7906
.345" /8.76mm
2203-C-7907
.352" /8.94mm
2203-D-7908
.359" /9.12mm
2203-E-7909
Shims - pinion
.003" /.075mm
Incl. in KITS 2432,
Use
2203-Z-6604
bearing cage
.005" /.125mm
RP180 1625, RP380 &
All
as
2203-A-6605
.010" /.254mm
RR830
req.
2203-B-6606
Pinion bearing cage & cups assembly
All
1
A-3226-Z-598
Washer - pinion bearing cage
All
9
1229-C-1511
All
9
10-X-1669
RP-xx-180 carriers
1
3892-J-4014
39
Capscrew - pinion bearing cage
40
Gear - helical driven
forward-rear
forward-rear
RP-xx-380 carriers
3892-B-4708
RP-180/380
3892-S-4023
RR & RS-xx-380
3892-D-4710
.756 overdrive
single axles & rear-rear
double reduction
41
Washer - drive pinion
42
Nut - drive pinion
Incl. in KITS RR380,
All
1
1229-K-2429
All
1
1227-P-900
RP380 & RP180 1625
NOTE: ITEMS 43-98 ARE USED ONLY IN FWD. CARRIERS WITH IAD & WITH OIL PUMP (180 & 380)
43
Cup - rear side gear bearing
Incl. in KITS RR380,
All
1
JM-515610
44
Cone - rear side gear bearing
RP380 & RP180 1625
All
1
JM-515649
45
Side gear - inter-axle differential rear
All
1
2234-F-890
46, 47,
Case assembly - inter-axle differential
All
1
A1-3235-X-1532
46, 47,
Case & nest assembly - inter-axle
All
1
A-3235-X-1532
48, 49,
differential
48, 49
50, 51,
52
3
FORWARD CARRIERS OF ALL TANDEM AXLES
REAR CARRIERS OF 380 SERIES (DOUBLE-REDUCTION) AXLES
ITEM
DESCRIPTION
REMARKS
CARRIER
QTY
PART NUMBER
47
Bolt - inter-axle differential case
All
8
S-2626-2
48
Washer - inter-axle differential case
All
16
1229-K-1597
49
Nut - inter-axle differential case
All
8
NL-26-1
Incl. in KITS 2421, 2422,
All
4
1229-Q-2929
RP180 1625 & RP380
All
4
2233-K-245
All
1
3278-N-300
forward-rear
RP-xx-180 carriers
1
3892-W-4963
50
Thrust washer - inter-axle pinion
51
Gear - inter-axle pinion
52
Spider (cross) - inter-axle differential
53
Helical drive & forward side gear
forward-rear
RP-xx-380 carriers
3892-Y-4965
RP-180/380
3892-M-5213
.756 overdrive
54
Thrust washer - helical drive gear
55
Input shaft, nut, ball & pin assembly
Incl. in KITS 2421, 2422,
All
1
1229-L-2742
All after 11/93
1
A1-3297-N-1288
RP180 1625 & RP380
A1-3297-K-115
All prior to 11/93
56
Roll pin - shift fork
All after 11/93
1
57
Shift fork - inter-axle differential
All after 11/93
1
3296-Q-1187
3296-L-90
All prior to 11/93
58
Not used
KIT 2268
All prior to 11/93
Clutch collar - inter-axle differential
All
1
3107-P-16
59
Adjusting screw - shift shaft
All
1
S-2812-2
60
Jam nut - adjusting screw
All
1
N-68-1
61
Cone - input shaft bearing
Incl. in KITS 4440,
All
1
HM-813844
62
Cup - input shaft bearing
RP180 1625 & RP380
All
1
HM-813810
Incl. in KIT 1573 & 2432
All prior to 11/93
Use
2203-C-6607
Incl. in KIT 2885 & 2886
All after 11/93
as
2203-K-9241
.005" /.127mm
Incl. in KIT 1573 & 2432
All prior to 11/93
req.
2203-D-6608
Incl. in KIT 2885 & 2886
All after 11/93
2203-L-9242
.010" /.254mm
Incl. in KIT 1573 & 2432
All prior to 11/93
2203-E-6609
Incl. in KIT 2885 & 2886
All after 11/93
63
Shims - input shaft
.003" /.076mm
bearing cage
64, 62
Bearing cage & cup assembly - input
All after 11/93
2203-M-9243
1
A-3226-J-790
All prior to 11/93
64A
64B
64C
Pressure relief valve - oil
Spring - oil pressure relief valve
Washer - plug
A-3226-H-1126
All after to 11/93
1
2297-U-5273
All prior to 11/93
0
Not used
All after 11/93
1
2258-Z-1118
All prior to 11/93
0
Not used
11/93 thru 5/97
1
1229-F-4062
All prior to 11/93 &
0
Not used
11/93 thru 5/97
1
1250-N-1080
All prior to 11/93 &
0
Not used
All after 11/93
7
1229-C-1511
All prior to 11/93
6
1229-C-1511
after 5/97
64D
Pressure relief plug
after 5/97
65
4
Washer - input bearing cage
FORWARD CARRIERS OF ALL TANDEM AXLES
REAR CARRIERS OF 380 (DOUBLE-REDUCTION) AXLES
ITEM
66
DESCRIPTION
REMARKS
Capscrew - input bearing cage
67
Oil seal - input bearing cage
68
Deflector - input yoke
69
Yoke & deflector assembly - input
CARRIER
QTY
PART NUMBER
All after 11/93
7
S-2814-A2
All prior to 11/93
6
10-X-1669
RP-180/380
1
A1-205-X2728
Available separately or
All
1
See Yoke Charts
as an assembly.
All
1
starting on page 24
All
1
1229-N-1730
All
1
1227-D-940
All after 11/93
1
3266-M-1313
70
Washer - input yoke & shaft
71
Nut - input yoke & shaft
Incl. in KITS RP180
72
Cover assembly - helical gear
Direct drive (1:1) &
1625 & RP380
Reduction (1.48:1)
Overdrive (.756:1)
Updates to current
3266-Q-1317
KIT 2678
All prior to 11/93
design direct drive (1:1)
& Reduction (1.48:1)
Updates to current
KIT 2679
design overdrive (.756:1)
73
Washer - gear cover to carrier
All
14
1229-C-1511
74
Capscrew - gear cover to carrier
All
14
S-2812-2
75
Spring - shift shaft return
All
1
2258-U-411
76
Shift shaft - inter-axle differential
All after 11/93
1
2244-K-1025
77
Shift assembly - inter-axle differential air
78
Capscrew - air shift assembly
2297-X-2494
All prior to 11/93
All after 11/93
1
KIT 2266
All prior to 11/93
79
80
81
Capscrew - filter shield
Washer - filter shield
Shield - oil filter
All after 11/93
0
Not used
All prior to 11/93
4
10-X-1334
All after 11/93
0
Not used
All prior to 11/93
2
S-256P-2
All after 11/93
0
Not used
All prior to 11/93
2
1229-E-1669
All after 11/93
1
3280-Z-8398
A-3280-F-8430
All prior to 11/93
82
Filter - oil
83
Capscrew - oil pump
All after 11/93
1
All prior to 11/93
Short
1
S-2616-2
6
S-2610-2
All after 11/93
84
85
Washer - oil pump
Oil pump assembly
forward-rear
MS-208045-1
All after 11/93
6
1229-E-1669
All prior to 11/93
7
1229-K-1597
All after 11/93
1
A-3303-P-1030
A1-3303-L-12
All prior to 11/93
85A
86
O-ring - pump assembly
Gear - pump driven
3280-V-8394
3280-V-5040
All prior to 11/93
Long
A2-3261-Q-1057
All after 11/93
2
5-X-1034
All prior to 11/93
0
Not used
All after 11/93
0
Not used
All prior to 11/93
1
3892-V-4936
5
FORWARD CARRIERS OF ALL TANDEM AXLES
REAR CARRIERS OF 380 SERIES (DOUBLE-REDUCTION) AXLES
ITEM
87
DESCRIPTION
REMARKS
Capscrew - filter adapter
88
Washer - filter adapter
89
Adapter - oil filter
90
Plug - gear cover
91
O-ring - oil tube to gear cover
CARRIER
QTY
All after 11/93
0
Not used
All prior to 11/93
2
S-2510-2
All after 11/93
0
Not used
All prior to 11/93
2
1229-E-1669
All after 11/93
1
2297-Z-5278
2297-E-2293
All prior to 11/93
92
Tube - gear cover oil
All after 11/93
0
Not used
All prior to 11/93
1
P-16
All after 11/93
0
Not used
All prior to 11/93
1
3780-R-382
All after 11/93
1
A-2297-D-5334
All prior to 11/93
93
94
Pin - oil restriction (not shown)
Nut - pump idler shaft
95
Bearing assembly - pump idler gear
96
Shaft - pump idler gear
97
Gear - pump idler drive
98
Washer - pump idler shaft
PART NUMBER
3196-B-28
All after 11/93
0
Not used
All prior to 11/93
1
1246-Q-615
All after 11/93
0
Not used
All prior to 11/93
1
NL-210-1
All after 11/93
0
Not used
All prior to 11/93
1
A-1228-Z-572
All after 11/93
0
Not used
All prior to 11/93
1
2297-L-5420
All after 11/93
0
Not used
All prior to 11/93
1
3892-W-4937
All after 11/93
0
Not used
All prior to 11/93
1
1829-J-738
NOTE: ITEMS 99-115 ARE USED ONLY IN FWD. CARRIERS W/O IAD OR OIL PUMP AND IN THE REAR
CARRIER OF 380 SERIES (DOUBLE REDUCTION) AXLES
99, 115
100
101
Input shaft & nut assembly
Cones - input shaft
Inner
bearing
Outer
Cups - input shaft
Inner
bearing
Outer
forward-rear
RN-xx-380 carriers
rear-rear
RR-xx-380 carriers
All
1
A-3297-M-117
A-3297-S-97
1
29685
496
All
1
29620
493
102
Oil scoop - helical gear cover
All
1
3221-H-8
103, 101,
Cover assembly - helical gear
All except rear-rear
1
A1-3266-B-834
Cover assembly - helical gear
RR-xx-380 carrier
1
A-3266-L-792
14
1229-C-1511
102
103, 101,
with pump
102, 116,
(rear-rear) with oil
117, 118,
pump
119, 120,
127, 128,
129
104
6
Washer - gear cover to carrier
All
FORWARD CARRIERS OF ALL TANDEM AXLES
REAR CARRIERS OF 380 SERIES (DOUBLE-REDUCTION) AXLES
ITEM
DESCRIPTION
REMARKS
CARRIER
QTY
PART NUMBER
All
14
Incl. in KIT 1554
All
Use 2
2203-U-7899
105
Capscrew - gear cover to carrier
106
Spacers - input
.326" /8.28mm
S-2812-2
shaft bearing
.327" /8.31mm
as
2203-V-7900
.328" /8.33mm
req.
2203-X-7902
.329" /8.36mm
2203-W-7901
.330" /8.38mm
2203-Y-7903
.331" /8.41mm
2203-Z-7904
.332" /8.43mm
2203-A-7905
.338" /8.59mm
2203-B-7906
.345" /8.76mm
2203-C-7907
.352" /8.94mm
2203-D-7908
.359" /9.12mm
2203-E-7909
107
Gear - helical drive
108
Cover - input
109
Washer - input cover
All
9
1229-K-1597
110
Capscrew - input cover
All
9
S-2610-2
111
Oil seal - input cover
forward-rear
RN-180/380 carriers
1
A1-1205-X-2728
rear-rear
RR-xx-380 carriers
112
Deflector - input yoke
113
Yoke & deflector assembly - input
114
Washer - input yoke & shaft
115
Nut - input yoke & shaft
All
1
3892-F-4712
forward-rear
RN-180/380 carriers
1
A-3266-Y-831
rear-rear
RR-xx-380 carriers
A-3266-P-1446
R945008
Available separately or
All
1
See Yoke Charts
as an assembly.
All
1
starting on page 24
forward-rear
RN-180/380 carriers
1
1229-N-1730
rear-rear
RR-xx-380 carriers
forward-rear
RN-180/380 carriers
rear-rear
RR-xx-380 carriers
1229-T-1736
1
1227-D-940
1227-J-946
NOTE: ITEMS 116-129 ARE OIL PUMP COMPONENTS THAT ARE ONLY USED IN REAR CARRIERS
116
Tube - finished steel 11.88" long
117
Hose clamp
118
Hose 3/8" x 2"
119
Tube - finished steel .94" radius
120
O-ring
121
Button - pump drive
122
Washer - oil pump bolt
3/8" OD x .032" wall
3/8" OD x .032" wall
1
3196-U-21
4
2257-S-1033
1
2296-F-1098
1
2296-B-106
1
9680368
1
2297-C-3799
11/32" ID x 5/8" OD
3
1229-E-1669
123
Bolt - oil pump
5/16" dia. x 2.24" long
3
S-2518-2
124
Bolt - oil pump
3/8" dia. x 2.25" long
1
S-2616-2
125
Washer - oil pump bolt
1
1229-B-1666
126
Oil pump assembly
1
A-3303-M-13
127
Tube - finished steel .125" radius
7/16" OD x .032" wall
1
3196-T-20
128
Hose - 7/16" x 2"
1
2296-G-1099
129
Tube - finished steel 2" long
7/16" OD x .032" wall
1
2296-A-105
13/32" ID x 13/16" OD
rear carriers only
7
CHART 2
CARRIERS FOR 180/185/186 SERIES SINGLE AXLES AND
REARS OF 180/185/186 SERIES TANDEM AXLES
(Use with Figure 2)
VISUAL IDENTIFICATION OF CARRIERS
REAR CARRIER WITHOUT DIFF. LOCK
A5-3200-C-1381 (ALUMINUM)
A6-3200-C-1381 (ALUMINUM)
A61-3200-U-1399 (MALLEABLE)
A54-3200-U-1399 (MALLEABLE)
A1-3200-K-1752 *
A1-3200-W-1791
A1-3200-K-1753
A-3200-J-1752 *
A1-3200-J-1804
A-3200-K-1753
A7-3200-J-1804
A1-3200-A-1899
A6-3200-S-1839 *
B5-3200-A-1899 (185/186 only)
B8-3200-A-1899 (185/186 only)
B1-3200-L-1910 *
* These carriers are equipped with a thrust screw.
8
REAR CARRIER WITH DIFF. LOCK
CARRIERS FOR 180/185/186 SERIES SINGLE AXLES &
REARS OF 180/185/186 SERIES TANDEM AXLES
ITEM
DESCRIPTION
130
Nut - drive pinion
130A
131
REMARKS
CARRIER
QTY
Incl. in KIT 2826
PART NUMBER
All
1
40-X-1233
Washer - pinion nut
All
1
1229-N-1730
Input yoke assembly & deflector
All
1
See Yoke Charts
starting on page 24
132
Deflector - input yoke
133
Oil seal - pinion bearing cage assy.
134
Cone - drive pinion outer bearing
Incl. in KIT 4435
All
1
3264-P-172
All
1
A-1205-Q-2591
All
1
H-715334
135
Cup - drive pinion outer bearing
All
1
H-715311
136
Capscrew - pinion bearing cage
1381
8
41-X-1043
137
Washer - pinion bearing cage
MS-212045-1
All others
1899
8
MWA-512
All others
138, 135,
Pinion bearing cage assembly
1752 & 1753
141
1
Incl. in KIT 1592
All
Shims - pinion
.003" /.075mm
Use
2803-Y-2755
bearing cage
.005" /.125mm
as
2803-Z-2756
.008" /.200mm
req.
2803-A-2757
.020" /.500mm
140
Spacers - pinion
bearing
Use
2803-D-2500
.251" /6.38mm
2803-E-2501
.252" /6.40mm
req.
2803-F-2502
Incl. in KIT 1593
All
.254" /6.45mm
2803-N-2510
.256" /6.50mm
2803-H-2504
.260" /6.60mm
2803-J-2506
.261" /6.63mm
2803-K-2507
.262" /6.65mm
2803-L-2508
.263" /6.68mm
2803-M-2509
.264" /6.70mm
2803-P-2512
Cup - drive pinion inner bearing
Cone - drive pinion inner bearing
Drive gear, pinion &
2803-B-2758
2 as
142
nut assembly
(3)
.250" /6.35mm
141
143, 130
A-3226-V-1010
A-3226-B-860
All except 1752 & 1753
139
1229-D-4632
Incl. in KIT 4435
All
1
9220
All
1
1228-V-594 (3)
2.93 ratio
Use KIT 2608 bolt kit
All 180/185/186 series
Use
B-41592-1
3.07 ratio
with these gearsets.
rear-rear carriers
1 as
B-41806-1
3.21 ratio
(except 3.73-4.30 ratios
req.
B-41026-3
3.42 ratio
in 1752 & 1753 carriers)
B-41004-3
3.58 ratio
B-41030-3
3.73 ratio
B-41016-3
3.91 ratio
B-41006-3
4.10 ratio
B-41018-3
4.30 ratio
B-41014-3
Timken part no. 9278
9
CARRIERS FOR 180/185/186 SERIES SINGLE AXLES &
REARS OF 180/185/186 SERIES TANDEM AXLES
ITEM
143, 130
DESCRIPTION
REMARKS
CARRIER
130
144
PART NUMBER
Drive gear, pinion &
4.56 ratio
Use KIT 2608 bolt kit
All 180/185/186 series
Use
B-41008-3
nut assembly
4.89 ratio
with these gearsets.
rear-rear carriers
1 as
B-41034-3
req.
B-41010-3
5.13 ratio
143 &
QTY
5.38 ratio
B-41028-3
5.63 ratio
B-41032-3
5.86 ratio
B-41012-3
6.14 ratio
B-41036-3
6.43 ratio
B-41024-4
6.83 ratio
B-41022-1
7.17 ratio
B-41020-1
7.40 ratio
B-41002-1
7.83 ratio
B-41650-1
Drive gear, pinion &
3.07 ratio
Use
B-41806-1
nut assembly
3.73 ratio
1752 & 1753
1 as
A-40636-1
3.91 ratio
req.
A-40638-1
4.10 ratio
A-40632-1
4.30 ratio
A-40634-1
Bearing - drive pinion spigot
6.83, 7.17, 7.40 &
All
1
1228-A-261
7.83 ratios only
All other ratios
144A
Snap ring - drive pinion spigot bearing
1228-S-1267
6.83, 7.17, 7.40 &
1
1229-K-1623
7.83 ratios only
1229-L-1624
All other ratios
145
Screw - thrust
1381
1
146
Nut - thrust screw jam
147
Differential carrier & cap assembly
1381
1
1
Less diff. lock
Malleable
(3.07-4.30 ratios)
(original design)
40-X-1015
1227-D-472
1752, 1839, 1910
Aluminum
41-X-1020
15-X-1167
1752, 1839, 1910
A2-3200-C-1381
KIT 2732
Less diff. lock
KIT 2732A
(4.56-7.40 ratios)
Malleable less
180 & early 185/186
diff. lock
series
A2-3200-J-1804
Malleable with
A2-3200-A-1899S
diff. lock
Malleable with or
Current 185/186 series
A2-3200-J-1752 (4)
without diff. lock
A2-3200-K-1753
With diff. lock
Malleable
(3.07-4.30 ratios)
(original design)
KIT 2731
With diff. lock
KIT 2731A
(4.56-7.40 ratios)
148
(4)
10
Washer - differential bearing cap
With set screw.
All
4
42-X-1024
CARRIERS FOR 180/185/186 SERIES SINGLE AXLES &
REARS OF 180/185/186 SERIES TANDEM AXLES
ITEM
149
DESCRIPTION
REMARKS
Capscrew - differential bearing cap
CARRIER
QTY
Aluminum carriers
4
Plug
Magnetic
All
Plain
41-X-1037
41-X-1018
Malleable carriers
150
PART NUMBER
Use
45-X-1008
1 as
45-X-1003
req.
151
Adjusting ring
Left hand
1752 & 1753
Left hand (small)
All exc. 1752 & 1753
1
2214-W-1011
2214-G-1125
1804, 1899
Left hand (small)
2214-S-279
original design
Right hand
1752 & 1753
2214-X-1012
Right hand (large)
All exc. 1752 & 1753
2214-S-1137
1804, 1899
2214-Q-277
Right hand (large)
original design
152
Cotter pin - adjusting ring left hand
Locking pin - adjusting ring
153
153A
Lock - adjusting ring right hand
Locking pin - adjusting ring
Locking pin - adjusting ring right hand
All exc. 1752 & 1753
1
1199-R-2176
43-X-1015
1752 & 1753
All
1
1220-K-89
1752 & 1753
1
43-X-1015
1246-P-1134
1899
154
Washer - adjusting ring lock
All
2
MWA-508
155
Capscrew - adjusting ring lock
All
2
MS-208020-1
156
156A
Cover - special carrier
Plug
1
3266-M-897
1899
1
1250-U-1217
157
Washer - cover
Items 156 thru 160 for
4
MWA-506
158
Capscrew - cover
1381 & 1399 carriers
4
41-X-1080
159
Plug - special carrier capscrew
without differential lock
1
41-X-1022
160
Washer - plug
1
1229-U-1503
161
Cups - differential
1
JHM-720210
LH
bearing
1381, 1399, 1539,
1752 & 1753 only
All others
RH
1381, 1399, 1539,
KIT 2744
64700
1752 & 1753 only
All others
JM-822010
11
CARRIERS FOR 180/185/186 SERIES SINGLE AXLES &
REARS OF 180/185/186 SERIES TANDEM AXLES
ITEM
161A
DESCRIPTION
Adhesive - bearing cap
REMARKS
CARRIER
QTY
PART NUMBER
Not shown. 2 tubes
All
1
2297-T-4180
1381, 1399, 1539,
1
JHM-720249
5cc each. (One tube
per bearing.)
162
Cones - differential
LH
bearing
1752 & 1753 only
All others
KIT 2744
1381, 1399, 1539,
RH
64450
1752 & 1753 only
JM-822049
All others
163
Nut - differential case to gear
164
Washer - plug
165
Bolt - differential case to gear
All
16
40-X-1182
1899
16
1229-W-1557
1229-U-1503 (5)
All others
166, 167,
Differential case & nest assembly
168, 169,
Used in KIT 1594
All others (6)
Used in KIT 2608
1753, 1804, 1899
2.93, 3.07, 3.21, 3.42,
1752 & 1753 with or
3.58 ratios
41-X-1358
41-X-1334
1
A1-3235-Y-2339
without diff. lock
170, 171,
(2.35" -46 spline)
172,
1752 & 1753 with or
172A,
without diff. lock
173
16
A2-3235-Y-2339
(2.56" -50 spline)
2.93, 3.08, 3.21, 3.42,
1381 & 1399
A5-3235-F-1618
3.58, 3.91, 4.10, 4.30
1791 & 1899 with diff.
A3-3235-K-2143
ratios
lock (2.35" -46 spline)
1791 & 1899 with diff.
A7-3235-K-2143
lock (2.56" -50 spline)
1804 less diff. lock
A2-3235-K-2143
(2.35" -46 spline)
1804 less diff. lock
A5-3235-K-2143
(2.56" -50 spline)
3.73, 3.91, 4.10, 4.30
1752 & 1753 with or
ratios
without diff. lock
A1-3235-U-2335
(2.35" -46 spline)
1752 & 1753 with or
without diff. lock
(2.56" -50 spline)
(5)
(6)
12
Can use 1229-W-1557 or MWA-516.
Some 1399 carriers require KIT 2601 for chamfered ring gear mounting holes.
A2-3235-U-2335
CARRIERS FOR 180/185/186 SERIES SINGLE AXLES &
REARS OF 180/185/186 SERIES TANDEM AXLES
ITEM
166, 167,
DESCRIPTION
Differential case & nest assembly
REMARKS
CARRIER
QTY
1
4.56, 4.89, 5.13, 5.38,
1381 & 1399
168, 169,
5.63, 5.86, 6.14, 6.43,
1752 & 1753 with or
170, 171,
6.83, 7.17, 7.40, 7.83
without diff. lock
172,
ratios
(2.35" -46 spline)
172A,
1752 & 1753 with or
173
without diff. lock
PART NUMBER
A3-3235-H-1620
A1-3235-W-2337
A2-3235-W-2337
(2.56" -50 spline)
1791 & 1899 with diff.
A2-3235-M-2145
lock (2.35" -46 spline)
1791 & 1899 with diff.
A7-3235-M-2145
lock (2.56" -50 spline)
1804 less diff. lock
A3-3235-M-2145
(2.35" -46 spline)
1804 less diff. lock
A5-3235-M-2145
(2.56" -50 spline)
166, 172,
Differential case assembly
2.93, 3.07, 3.21, 3.42,
1752 & 1753 with or
172A,
3.58 ratios
without diff. lock
173
2.93, 3.08, 3.21, 3.42,
1381 & 1399
3.58, 3.91, 4.10, 4.30
1791 & 1899 with diff.
ratios
1
A-3235-Y-2339
A-3235-F-1618
A1-3235-K-2143
lock
1804 less diff. lock
A-3235-K-2143
3.73, 3.91, 4.10, 4.30
1752 & 1753 with or
A-3235-U-2335
ratios
without diff. lock
4.56, 4.89, 5.13, 5.38,
1381 & 1399
A-3235-H-1620
5.63, 5.86, 6.14, 6.43,
1752 & 1753 with or
A-3235-W-2337
6.83, 7.17, 7.40, 7.83
without diff. lock
ratios
1791 & 1899 with diff.
A-3235-M-2145
lock
1804 less diff. lock
166, 172,
Differential case & NoSPIN assembly
A1-3235-M-2145
1
2.93, 3.08, 3.21, 3.42,
1381 & 1399
3.58, 3.91, 4.10, 4.30
1804 less diff. lock
173,
ratios
(2.35" -46 spline)
173A
4.56, 4.89, 5.13, 5.38,
1381 & 1399
A5-3235-H-1620
5.63, 5.86, 6.14, 6.43,
1804 less diff. lock
A4-3235-M-2145
172A,
6.83, 7.17, 7.40, 7.83
(2.35" -46 spline)
ratios
1804 less diff. lock
A6-3235-F-1618
A4-3235-K-2143
A6-3235-M-2145
(2.56" -50 spline)
167
Thrust washer - side gear
168
Side gear - differential
All
2
1229-L-3002
Incl. in KIT 2318
2.35" -46 spline
2
2234-C-1069
Incl. in KIT 2373
2.56" -50 spline
1
2234-P-1004
169
Thrust washer - differential pinion
All
4
1229-K-3001
170
Gear - differential pinion
All
4
2233-M-1001
171
Spider - differential
All
1
3278-W-335
13
CARRIERS FOR 180/185/186 SERIES SINGLE AXLES &
REARS OF 180/185/186 SERIES TANDEM AXLES
ITEM
172
DESCRIPTION
Capscrew - differential case
172A
Thread locking liquid
172B
Nut
173
173A
REMARKS
Use on Item 172
Washer
NoSPIN Assembly
CARRIER
QTY
PART NUMBER
All others
12
41-X-1275
Thru-bolt design
4
41-X-1109
8
41-X-1275
All
1
2297-C-7049
1899
4
40-X-1182
1899
16
1229-W-1557
All others
12
1229-U-1503
2.35" -46 spline
1
A-3230-C-1043
A-3230-A-1041
2.56" -50 spline
NOTE: ITEMS 174-194 ARE FOR CARRIERS WITH DIFFERENTIAL LOCK
174
Shift collar
2.35" -46 spline
1752 & 1753
1
3107-L-1104
All others
2.37" -46 spline
1381 & 1399
3107-Z-78
2.56" -50 spline
1752 & 1753
3107-V-1010
One pc. style
1381, 1399, 1791
All others
175
176
Shift fork
Pin - shift fork
3107-A-1041
Used with 3 pc. style
3107-N-1106
1
3296-N-1184
1752 & 1753
3296-A-1197
1899
3296-D-1174
1381 & 1399
2
43-X-1007
All others
0
Not used
1899
1
2258-N-1262
fork (3296-V-178)
177
Spring - shift shaft
2258-L-714
All others
178
Shift shaft
1752 & 1753
1
1899
2244-V-1114
2244-Y-51
All others
179
180
181
Pin - shift shaft
Washer - piston
Tube - air cylinder
1899
0
Not used
All others
1
43-X-1006
1752, 1753 & 1899
0
Not used
All others
1
42-X-1027
1899
1
3261-A-1067
3196-F-32
All others
182
Piston
183
O-ring
184
Gasket - cylinder cover
185
Capscrew - manual engaging
1899
1
1899
1
185A
186
14
5-X-1198
5-X-1153
All others
1899
2230-T-1190
2230-N-170
All others
(shipping)
2244-Z-52
0
Not used
All others
1
2208-H-944
1899
1
41-X-1368
41-X-1333
All others
O-ring
1899
1
5-X-521
Cover cylinder
1899
0
See Item 181
All others
1
3266-F-1020
CARRIERS FOR 180/185/186 SERIES SINGLE AXLES &
REARS OF 180/185/186 SERIES TANDEM AXLES
ITEM
187
DESCRIPTION
Capscrew - cylinder cover
188
Washer - cylinder cover
189
Gasket - plug
190
Plug - cylinder cover
191
Switch - sensor
191A
192
193
REMARKS
Washer - sensor switch
Nut - sensor switch
Adaptor - cylinder cover
CARRIER
QTY
PART NUMBER
1899
0
Not used
All others
4
41-X-1364
1899
0
Not used
All others
4
MWA-506
1899
0
Not used
All others
1
2208-L-1000
1899
0
Not used
All others
1
MS-210016-1
All
1
3237-W-1167
1752 & 1753
2
1229-U-1503
1752, 1753 & 1899
0
Not used
All others
1
1227-P-1056
1
No longer available
1
2208-L-1000
For carriers with DCDL
1
3266-M-897
bolt holes, but less
4
41-X-1080
DCDL
4
MWA-516
Converts old metric
covers to use
American standard
threads.
194
Gasket - adapter
Only used with
Item 193
194A
Cover - cylinder hole
194B
Capscrew - cylinder hole cover
194C
Washer - cylinder hole cover
15
OUTPUT (THRU) SHAFT ASSEMBLY PARTS
AXLE
ITEM
DESCRIPTION
195, 196, 198,
Output (thru) shaft, bearing cage and
201, 202, 203,
seal assembly
REMARKS
MODEL
QTY
PART NUMBER
All
1
A1-3226-Q-901
204, 205, 206,
207
196
Shaft - output (thru)
All
1
3297-W-75
197
Silastic gasket material (not shown)
Use as gasket for Item 198
All
1
2297-A-7021
198
Bearing cage & inner cup assembly
Includes one piece of Item 201
All
1
A-3226-Q-901
199
Washer - output bearing cage
All
6
1229-E-1513
200
Capscrew - output bearing cage
All others
6
S-2711-2
201
Cups - inner & outer output bearing
202
Cones - inner & outer output bearing
203
Snap ring (spacer) output bearing
S-2710-2
RT-70-380
All
Incl. in KIT 1536
2
382A
All
2
385A
All
Use
1229-L-2430
1 as
1229-M-2431
req.
1229-N-2432
1229-P-2434
1229-Q-2435
1229-R-2436
1229-S-2437
1229-T-2438
1229-U-2439
204
Snap ring spacer - output bearing yoke
All
1
1229-T-3062
205
Oil seal assembly
All
1
A-1205-C-1927
206
Washer - output yoke and shaft
All
1
1229-T-1736
207
Nut - output yoke and shaft
All
1
1227-J-946
Breather assembly – housing
All
1
A-1199-W-4053
209A
16
HOUSING ASSEMBLY PARTS
ITEM
DESCRIPTION
REMARKS
AXLE OR WHEEL END
QTY
PART NUMBER
208
Axle housing assembly
All
1
As specified
209
Breather assembly - housing
All
1
A-1199-R-4048
210
Stud - housing to carrier
Total of five studs required
2
4-X-1051
2
SN-1036-1
1
SN-1020-1
4
4-X-1929
All others
Single and tandem
rears of 180/185/186
series axles
211
Plug - heat indicator
All
1
P-28S
212
Plug - oil fill & drain
Magnetic
2
1250-E-473
P-212
Standard
213
Washer - carrier to housing
All
14
1229-W-1557
214
Silastic gasket material
All
1
2297-A-7021
215
Capscrew - carrier to housing
9
10-X-1595
Single and tandem
All others
Incl. in KIT 2673
4
10-X-1596
rears of 180/185/186
6
10-X-1601
4
10-X-1595
2
10-X-1597
4
10-X-1599
series axles
Single
RS/RR185/186
Incl. in KIT 4744
using 1752 or
1753 carriers
17
HOUSING ASSEMBLY PARTS
ITEM
216
DESCRIPTION
Nut - carrier to housing
REMARKS
AXLE OR WHEEL END
QTY
PART NUMBER
All others
5
N-110-1
Single and tandem
4
N-110-1
2
1199-B-1666
rears of 180/185/186
series axles
217
218
218A
Wiper - housing spindle oil seal
Oil seal assembly inner
Oil seal assembly
Optional item. Use
R
with standard oil seal
U
1244-U-879
W
2245-E-31
Standard oil seal, use
U
with Item 217
W
2
A-1205-Z-1820
Unitized oil seal
R
2
A-1205-R-2410
R
2
598A
A-1205-S-1657
(wiper built in)
219
Cone - inner wheel bearing
782
U&W
220
Cup - inner wheel bearing
R
2
221
222
223
Cup - outer wheel bearing
Cone - outer wheel bearing
Nut - inner wheel bearing adjuster
R
2
Lockwasher - adjuster nut
U
742
6535
R
2
225
749
W
6580
R&U
R&U
2
1227-W-517
1227-A-547
2
1229-F-4634S (7)
1229-V-48
Washer - tanged lock
R&U
2
1229-F-4634S (7)
Nut - outer wheel bearing (jam)
R&U
2
1227-R-330
W
(7) Includes 1 tanged washer and 1 lockwasher.
18
580
U
W
224A
572
W
W
224
592A
772
U&W
1227-F-448
AXLE SHAFT SETS FOR 180/185/186/380 SERIES AXLES
LEFT HAND
RIGHT HAND
LEFT HAND
RIGHT HAND
RS-23-180/185/186
3202-W-7745
3202-W-7745
3202-X-9098
3202-W-9149
3202-W-9149
3202-K-9267
3202-E-9391
3202-E-9391
3202-K-9579
3202-K-9579
3202-W-9643
Single Axle
3202-H-8666
3202-Y-8111
3202-W-9097
3202-V-9148
3202-G-9159
3202-L-9372
3202-F-9392
3202-S-6779
3202-M-9581
3202-L-9580
3202-Y-9645
RR-26-180/185
3202-H-9004
3202-G-9393
3202-G-9393
Rear of RT-52-18X Tandem
3202-N-9400
3202-B-8816
3202-G-9003
RS-26-180/185
3202-J-9344
3202-J-9344
3202-L-9346
3202-G-9393
3202-G-9393
3202-N-9400
3202-Q-9403
Single Axle
3202-L-9346
3202-J-9552
3202-J-9344
3202-B-8816
3202-G-9003
3202-H-9004
3202-H-9004
RS-23-380
3202-H-6768
3202-S-6779
3202-G-9497
Single Axle
3202-W-7745
3202-R-6778
3202-K-9501
RS-26-181
3202-S-6779
Single Axle
3202-R-6778
RP-24-180/185
3202-H-6768
3202-S-6779
3202-F-9496
Forward of RT-48-180 Tandem
3202-W-7745
3202-R-6778
3202-E-9495
RP-26-380
3202-S-6779
Forward of RT-52-380 Tandem
3202-R-6778
RR-26-380
3202-S-6779
Rear of RT-52-380 Tandem
3202-R-6778
3202-Y-9125
3202-Y-9125
3202-J-9344
3202-J-9344
3202-L-9346
3202-G-9393
3202-G-9393
Rear of RT-48-180 Tandem
3202-C-9129
3202-J-9396
3202-L-9346
3202-J-9552
3202-J-9344
3202-B-8816
3202-G-9003
RS-26-380
3202-H-6768
3202-S-6779
Single Axle
3202-W-7745
3202-R-6778
RP-29-180/185
3202-X-8110
3202-K-9501
3202-L-9502
3202-L-9554
Forward of RT-58-180 Tandem
3202-H-6768
3202-Z-8112
3202-G-9003
3202-X-8110
RP-24-380
3202-S-6779
Front of RT-48-380 Tandem
3202-R-6778
RR-24-380
3202-S-6779
Rear of RT-48-380 Tandem
3202-R-6778
RP-26-180/185
3202-S-6779
3202-G-9497
Front of RT-52-18X Tandem
3202-R-6778
3202-K-9501
RR-29-180/185
3202-S-6779
3202-J-9370
3202-J-9370
3202-E-9391
3202-E-9391
Rear of RT-58-180 Tandem
3202-W-9409
3202-N-9374
3202-L-9372
3202-T-9458
3202-R-9456
RN-29-380
Forward of RT-58-380 Tandem
(less inter-axle diff.)
3202-G-9003
3202-L-9502
19
AXLE SHAFT SETS FOR 180/185/186/380 SERIES AXLES (cont.)
LEFT HAND
RIGHT HAND
LEFT HAND
RIGHT HAND
RP-29-380
3202-X-8110
3202-K-9501
3202-L-9502
3202-L-9554
Forward of RT-58-380 Tandem
3202-H-6768
3202-Z-8112
3202-G-9003
3202-X-8110
RR-29-380
3202-X-8110
3202-K-9501
3202-L-9502
Rear of RT-58-380 Tandem
3202-H-6768
3202-Z-8112
3202-G-9003
RP-35-380
3202-L-7734
3202-M-7787
3202-C-7803
3202-P-9142
3202-P-9246
3202-R-9248
Forward of RT-70-380 Tandem
3202-M-7735
3202-N-7788
3202-D-7804
3202-Q-9143
3202-Q-9247
3202-S-9249
RS-30-180/185
3202-S-6779
3202-S-6779
3202-J-9370
3202-J-9370
3202-E-9391
3202-E-9391
Single Axle
3202-W-9409
3202-Y-9411
3202-N-9374
3202-L-9372
3202-T-9458
3202-R-9456
RR-35-380
3202-L-7734
3202-M-7787
3202-C-7803
3202-P-9142
3202-P-9246
3202-R-9248
Rear of RT-70-380 Tandem
3202-M-7735
3202-N-7788
3202-D-7804
3202-Q-9143
3202-Q-9247
3202-S-9249
RS-38-380
3202-P-9142
Single Axle
3202-Q-9143
RS-30-181
3202-X-8110
3202-K-9501
Single Axle
3202-H-6768
3202-Z-8112
RS-30-380
3202-X-8110
3202-K-9501
3202-L-9502
Single Axle
3202-H-6768
3202-Z-8112
3202-G-9003
RP-35-180
3202-L-7734
3202-M-7787
Forward of RT-70-180 Tandem
3202-M-7735
3202-N-7788
RR-35-180
3202-D-9806
3206-U-1477
Rear of RT-70-180 Tandem
3202-C-9805
3206-T-1476
RN-35-380
Forward of RT-70-380 Tandem
(less inter-axle diff.)
3202-N-7788
3202-Q-9143
3202-S-9249
3202-M-7787
3202-P-9142
3202-R-9248
20
AXLE SHAFTS
BODY
PART NUMBER
LUBE
SPLINE
SPLINE
FLANGE
NO. OF
HOLE
BOLT
HOLE
DIA.
LENGTH
HOLE
SIZE
LENGTH
DIA.
HOLES
SIZE
CIRCLE
TYPE
3202-J-9344
2.25"
36.57"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-Y-9125
2.25"
36.57"
No
2.35" -46
3.03"
8.38"
8
.78"
7.00"
Straight
3202-G-9393
2.25"
37.31"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-E-9391
2.25"
37.78"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-W-9643
2.25"
37.78"
Yes
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-W-9149
2.25"
37.78"
No
2.35" -46
3.03"
8.38"
8
.78"
7.00"
Straight
3202-K-9579
2.25"
38.56"
No
2.35" -46
3.03"
8.38"
8
.64"
7.00"
Straight
3202-W-7745
2.25"
38.56"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-X-9098
2.25"
38.56"
Yes
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-E-9495
2.25"
38.56"
No
2.35" -46
3.03"
8.38"
8
.78"
7.00"
Straight
3202-J-9370
2.25"
38.75"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-R-6778
2.25"
39.22"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3206-U-1477
2.25"
39.61"
Yes
2.55" -50
3.15"
8.50"
8
.73"
7.25"
Taper
3202-Z-8112
2.25"
39.96"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-H-9004
2.25"
40.31"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-F-9496
2.25"
41.03"
No
2.35" -46
3.03"
8.38"
8
.78"
7.00"
Straight
3202-H-6768
2.25"
41.06"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-K-9267
2.25"
41.37"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-M-7735
2.38"
41.71"
Yes
2.55" -50
3.15"
8.50"
8
.73"
7.25"
Taper
3202-S-6779
2.25"
41.72"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-G-9159
2.25"
41.72"
No
2.35" -46
3.03"
8.38"
8
.78"
7.00"
Straight
3202-Q-9143
2.25"
41.74"
Yes
2.55" -50
3.15"
8.50"
8
.73"
7.25"
Taper
3202-F-9392
2.25"
41.85"
No
2.35" -46
9.14"
8.38"
8
.73"
7.00"
Taper
3202-Y-9645
2.25"
41.85"
Yes
2.35" -46
9.14"
8.38"
8
.73"
7.00"
Taper
3202-V-9148
2.25"
41.85"
No
2.35" -46
9.14"
8.38"
8
.78"
7.00"
Straight
3202-K-9501
2.25"
42.30"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-L-9580
2.25"
42.56"
No
2.35" -46
3.03"
8.38"
8
.64"
7.00"
Straight
3202-Y-8111
2.25"
42.56"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
21
AXLE SHAFTS
BODY
PART NUMBER
LUBE
SPLINE
SPLINE
FLANGE
NO. OF
HOLE
BOLT
HOLE
DIA.
LENGTH
HOLE
SIZE
LENGTH
DIA.
HOLES
SIZE
CIRCLE
TYPE
3202-M-9581
2.25"
42.72"
No
2.35" -46
9.14"
8.38"
8
.64"
7.00"
Straight
3202-H-8666
2.25"
42.72"
No
2.35" -46
9.14"
8.38"
8
.73"
7.00"
Taper
3202-W-9097
2.25"
42.72"
Yes
2.35" -46
9.14"
8.38"
8
.73"
7.00"
Taper
3202-J-9552
2.25"
43.01"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-J-9396
2.25"
43.01"
No
2.35" -46
3.03"
8.38"
8
.78"
7.00"
Straight
3202-L-9346
2.25"
43.07"
No
2.35" -46
9.14"
8.38"
8
.73"
7.00"
Taper
3202-C-9129
2.25"
43.07"
No
2.35" -46
9.14"
8.38"
8
.78"
7.00"
Straight
3202-X-8110
2.25"
43.40"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-G-9003
2.25"
43.80"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-B-8816
2.25"
43.93"
No
2.35" -46
9.14"
8.38"
8
.73"
7.00"
Taper
3202-L-7734
2.38"
44.18"
Yes
2.55" -50
3.15"
8.50"
8
.73"
7.25"
Taper
3202-P-9142
2.38"
44.21"
Yes
2.55" -50
3.15"
8.50"
8
.73"
7.25"
Taper
3202-R-9456
2.25"
44.37"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-T-9458
2.25"
44.45"
No
2.35" -46
9.14"
8.38"
8
.73"
7.00"
Taper
3202-G-9497
2.25"
44.77"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-L-9372
2.25"
45.34"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-N-9374
2.25"
45.42"
No
2.35" -46
9.14"
8.38"
8
.73"
7.00"
Taper
3202-M-9269
2.25"
45.53"
No
2.35" -46
9.14"
8.38"
8
.73"
7.00"
Taper
3202-D-7804
2.25"
45.84"
Yes
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-S-9249
2.25"
45.84"
Yes
2.55" -50
3.15"
8.50"
8
.73"
7.25"
Taper
3202-L-9554
2.25"
45.90"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3206-T-1476
2.25"
46.28"
Yes
2.55" -50
3.15"
8.50"
8
.73"
7.25"
Taper
3202-L-9502
2.25"
46.30"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-N-9400
2.25"
46.74"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
3202-Q-9403
2.25"
46.90"
No
2.35" -46
9.14"
8.38"
8
.73"
7.00"
Taper
3202-C-7803
2.38"
48.31"
Yes
2.55" -50
3.15"
8.50"
8
.73"
7.25"
Taper
3202-R-9248
2.38"
48.31"
Yes
2.55" -50
3.15"
8.50"
8
.73"
7.25"
Taper
3202-W-9409
2.25"
48.31"
No
2.35" -46
3.03"
8.38"
8
.73"
7.00"
Taper
22
AXLE SHAFTS
BODY
PART NUMBER
LUBE
SPLINE
SPLINE
FLANGE
NO. OF
HOLE
BOLT
HOLE
DIA.
LENGTH
HOLE
SIZE
LENGTH
DIA.
HOLES
SIZE
CIRCLE
TYPE
3202-Y-9411
2.25"
48.39"
No
2.35" -46
9.14"
8.38"
8
.73"
7.00"
Taper
3202-D-9806
2.25"
51.63"
Yes
2.55" -50
3.15"
8.50"
8
.73"
7.25"
Taper
3202-N-7788
2.38"
53.72"
Yes
2.55" -50
3.15"
8.50"
8
.73"
7.25"
Taper
3202-Q-9247
2.38"
53.74"
Yes
2.55" -50
3.15"
8.50"
8
.73"
7.25"
Taper
3202-M-7787
2.38"
56.18"
Yes
2.55" -50
3.15"
8.50"
8
.73"
7.25"
Taper
3202-P-9246
2.38"
56.21"
Yes
2.55" -50
3.15"
8.50"
8
.73"
7.25"
Taper
3202-C-9805
2.25"
58.27"
Yes
2.55" -50
3.15"
8.50"
8
.73"
7.25"
Taper
XpresswayPlus.ArvinMeritor.com
Don't forget about using XpresswayPlus for:
y Ordering parts online
y Order status
y Reference Library
y Price and availability
y The Company Store
y Invoice Lookup
y Literature
y Parts Catalog
y Dealer/Distributor locator
y Online e-mail or phone numbers for Customer Service, Information Services,
Marketing, Catalog, and eSupport
XpresswayPlus is easy to use, can reduce phone calls, and save you valuable time.
23
ROUND BEARING TYPE YOKES
Spline Size
Axle Model
Center
Spline
Hub
Bearing
Across
Dia.-No.
(Location)
to End
Length
Dia.
Dia.
Ears
Teeth
Single Axle
5.50"
2.88"
3.25"
1.88"
5.31"
2.38" -46
16NYS38-11A
A-3260-Y-1143
Input
5.94"
1.94"
6.09"
17N-4-5961X
A1-3260-S-357
RS-23-180
5.94"
1.94"
6.09"
17N-4-6961X
A-3260-S-357
RS-26-180
6.19"
1.94"
6.09"
17NYS38-17A2
A2-3260-W-75
RS-30-180
6.93"
1.94"
6.09"
17N-4-7851X
A-3260-N-1314
5.63"
1.94"
7.00"
176N-4-861X
A-3260-R-356
5.69"
1.94"
7.55"
18N-4-3581X
A2-3260-U-73
1.94"
6.09"
17NYS32-100A2
A2-3260-G-1645
Production Part
Part Number
Number
Single Axle Input
RS-23-380
5.16"
2.31"
3.00"
2.00" -39
RS-26-380
6.25"
6.09"
17NYS32-99A3
---
RS-38-380
5.19"
7.55"
18NYS32-12A2
A2-3260-L-116
17N-4-5961X
A1-3260-S-357
Fwd. Axle Input
RT-48-180
RT-52-180
RT-58-180
5.94"
2.88"
3.25"
1.94"
6.09"
2.38" -46
5.63"
7.00"
176NYS38-13A1
A1-3260-R-356
5.69"
7.55"
18N-4-3221X
A-3260-U-73
16N-4-6271
3260-G-111
RT-48-380
RT-52-380
5.54"
RT-58-380
6.25"
2.31"
3.00"
1.88"
5.31"
1.94"
6.09"
2.00" -39
17NYS32-99
---
RT-70-380
5.16"
1.94"
6.09"
17NYS32-100A
A3260-G-1645
Fwd. Axle Output
5.19"
1.94"
7.55"
18N-4-3371
3260-L-116
1.88"
5.31"
16NYS38-11A
A-3260-Y-1143
Rear Axle Input
RT-48-180
RT-52-180
24
5.50"
2.88"
3.25"
2.38" -46
5.94"
1.94"
6.09"
17N-4-5961X
A1-3260-S-357
RT-58-180
5.94"
1.94"
6.09"
17N-4-6961X
A-3260-S-357
RT-52-380
6.19"
1.94"
6.09"
17NYS38-17A2
A2-3260-W-75
RT-48-380
6.93"
1.94"
6.09"
17N-4-7851X
A-3260-N-1314
RS-58-380
5.63"
1.94"
7.00"
176N-4-861X
A-3260-R-356
RT-70-380
5.69"
1.94"
7.55"
18N-4-3581X
A2-3260-U-73
EASY SERVICE (STRAP) TYPE YOKES
Axle Model
Center
Spline
(Location)
to End
Length
Single Axle
5.50"
2.88"
Distance
Spline
Bearing
Between
Size Dia.-
Hole
Dia.
Dia.
Nibbs
No. Teeth
Type
3.25"
1.88"
5.31"
2.38" -46
TH
16TYS38-11A
A-3260-M-1235
Hub
Production Part
Part Number
Number
Input
5.94"
1.94"
6.19"
TH
17N-4-6961-1X
A-3260-B-1302
RS-23-180
6.93"
1.94"
6.19"
TH
17TYS38-70A
A-3260-R-1682
RS-26-180
5.63"
1.94"
7.09"
TH
176N-4-861-1X
A-3260-Q-1265
RS-30-180
5.69"
Single Axle Input
5.54"
1.94"
7.63"
1.88"
5.31"
RS-23-380
RS-26-380
5.16"
1.94"
5.19"
1.94"
RS-38-380
5.19"
Fwd. Axle Input
5.94"
RT-48-480
5.63"
RT-52-180
5.69"
2.31"
2.88"
3.00"
3.25"
TH
18N-4-3581-1X
A-3260-K-1259
TH
16N-4-6271-1
3260-F-1280
6.19"
TH
17TYS32-68A2
A2-3260-R-1292
7.09"
TH
176TYS32-3A2
A2-3260-S-1267
1.94"
7.63"
TH
18TYS32-12A2
A2-3260-N-1262
1.94"
6.19"
TH
17TYS38-53A1
A1-3260-B-1302
1.94"
7.09"
TH
176TYS38-13A1
A1-3260-Q-1265
1.94"
7.63"
TH
1.88"
5.31"
TH
16N-4-6271-1
3260-F-1280
1.94"
6.19"
TH
17N-4-7621-1
3260-R-1292
2.00" -39
2.38" -46
RT-58-180
RT-52-380
5.54"
RT-58-380
5.16"
2.31"
3.00"
2.00" -39
18N-4-3221-1X
A1-3260-K-1259
RT-70-380
6.25"
1.94"
6.19"
TH
17TYS32-99
Fwd. Axle Output
5.19"
1.94"
7.63"
TH
18N-4-3381-1X
A-3260-N-1262
Rear Axle Input
5.50"
1.88"
5.31"
TH
16TYS38-11A
A-3260-M-1235
RT-48-180
5.94"
1.94"
6.19"
TH
17N-4-6961-1X
A-3260-B-1302
RT-52-180
6.93"
1.94"
6.19"
TH
17TYS38-70A
A-3260-R-1682
2.88"
3.25"
2.38" -46
---
RT-58-180
5.63"
1.94"
7.09"
TH
176N-4-861-1X
A-3260-Q-1265
RT-52-380
5.69"
1.94"
7.63"
TH
18N-4-3581-1X
A-3260-K-1259
RT-58-380
RT-70-380
25
WING BEARING TYPE YOKES
Face
Spline
Axle Model
to
Spline
Hub
Slot
Pilot
Size Dia.-
Hole
(Location)
End
Length
Dia.
Width
Dia.
No. Teeth
Type
RS-23-180
4.63"
2.88"
3.25"
.63"
8.13"
2.38" -46
TH
82NYS38-28A
A-3260-D-1148
RS-26-180
4.19"
TH
92NYS38-52A2
A2-3260-Q-95
Production Part
Part Number
Number
Single Axle Input
8.25"
RS-30-180
Single Axle Input
RS-23-380
3.88"
2.31"
3.00"
.63"
8.13"
2.00" -39
TH
82NYS32-74A2
A2-3260-M-117
4.19"
2.88"
3.25"
.63"
8.25"
2.38" -46
TH
92NYS38-52A
A-3260-Q-95
3.88"
2.31"
3.00"
.63"
8.13"
2.00" -39
TH
82NYS32-74
3260-M-117
RT-52-180
4.63"
2.88"
3.25"
.63"
8.13"
2.38" -46
TH
82NYS38-28A
A-3260-D-1148
RT-58-180
4.19"
TH
92NYS38-52A2
A2-3260-Q-95
RS-26-380
RS-38-380
Fwd. Axle Input
RT-48-180
RT-52-180
RT-58-180
RT-48-380
RT-52-380
RT-58-380
RT-70-380
Fwd. Axle Output
Rear Axle Input
RT-48-180
RT-48-380
RT-52-380
RT-58-380
RT-70-380
26
8.25"
COMPANION FLANGES
Face
Axle Model
to
Pilot Dia.
Hub
Spline
M=Male
Flange
Hole
Bolt
Spline
Circle
Size Dia.-
(Location)
End
Dia.
Length
F=Female
O.D.
Dia.
Dia.
No. Teeth
Single Axle
3.56"
3.25"
2.88"
F-7.75"
8.00"
.44"
7.25"
2.38"-46
Input
3.64"
F-7.75"
8.00"
.44"
7.25"
Production
Part Number
Part Number
5WCS38-12A2
A2-3260-U-151
5WCS38-24A
A-3260-D-1252
RS-23-180
RS-26-180
RS-30-180
27
AXLE MODEL TO CARRIER TO KIT CROSS REFERENCE
AXLE
MODEL
RS-23-180 Single Axle
RS-23-185
RS-23-186
RS-30-180
RS-30-185
BASE
CARRIER
3200-C-1381
3200-U-1399
3200-W-1791
3200-A-1899
3200-J-1804
3200-J-1752
3200-K-1753
28
KIT
NUMBER
KIT DESCRIPTION
KIT 1592
Pinion bearing cage shims
KIT 1593
Pinion bearing spacer kit
KIT 2318
Main differential nest with spider 2.35-46 spline
KIT 2341
Main differential nest without spider 2.35-46 spline
KIT 2363
Main differential lock kit
KIT 2373
Main differential nest with spider 2.56-50 spline
KIT 2374
Main differential nest without spider 2.56-50 spline
KIT 4435
Bearing kit all except 6.83, 7.17, 7.40 & 7.83 ratios
KIT 4436
Bearing kit, 6.83, 7.17, 7.40 & 7.83 ratios
KIT RS23180
Major overhaul kit
KIT 1592
Pinion bearing cage shims
KIT 1593
Pinion bearing spacer kit
KIT 2318
Main differential nest with spider 2.35-46 spline
KIT 2341
Main differential nest without spider 2.35-46 spline
KIT 2373
Main differential nest with spider 2.56-50 spline
KIT 2374
Main differential nest without spider 2.56-50 spline
KIT 2630
Main differential lock kit (except 1899 carrier)
KIT 2699
Main differential lock kit (1899 carrier)
KIT 4437
Bearing kit all except 6.83, 7.17, 7.40 & 7.83 ratios
KIT 4438
Bearing kit, 6.83, 7.17, 7.40 & 7.83 ratios
A2-3200-A-1899S
Carrier update
KIT RS23180A
Major overhaul kit
KIT 1592
Pinion bearing cage shims
KIT 1593
Pinion bearing spacer kit
KIT 2318
Main differential nest with spider 2.35-46 spline
KIT 2341
Main differential nest without spider 2.35-46 spline
KIT 2373
Main differential nest with spider 2.56-50 spline
KIT 2374
Main differential nest without spider 2.56-50 spline
KIT 4437
Bearing kit all except 6.83, 7.17, 7.40 & 7.83 ratios
KIT 4438
Bearing kit, 6.83, 7.17, 7.40 & 7.83 ratios
KIT RS23180A
Major overhaul kit
KIT 1592
Pinion bearing cage shims
KIT 1593
Pinion bearing spacer kit
KIT 2318
Main differential nest with spider 2.35-46 spline
KIT 2341
Main differential nest without spider 2.35-46 spline
KIT 2373
Main differential nest with spider 2.56-50 spline
KIT 2374
Main differential nest without spider 2.56-50 spline
KIT 2791
Complete diff. lock retro-fit kit
KIT 2792
Major diff. lock repair kit
KIT 2793
Minor diff. lock repair kit
KIT 4459
Bearing kit all except 6.83, 7.17, 7.40 & 7.83 ratios
KIT 4460
Bearing kit, 6.83, 7.17, 7.40 & 7.83 ratios
KIT RR26185 1752 Overhaul kit 2.35-46 spline. Ratios 2.93-6.43
KIT RR26185A 1752 Overhaul kit 2.35-46 spline. Ratios 6.83-7.83
AXLE MODEL TO CARRIER TO KIT CROSS REFERENCE
AXLE
BASE
MODEL
CARRIER
RT-48-180 RP-24-180 3200-M-1625
RT-52-180 RP-26-180
RT-52-185 RP-26-185
RT-58-180 RP-29-180
RT-58-185 RP-29-185
3200-M-1833
RR-24-180 3200-C-1381
RR-26-180 3200-U-1399
RR-26-185
RR-29-180
RR-29-185
3200-W-1791
3200-A-1899
3200-J-1804
KIT
NUMBER
KIT 1554
KIT 2421
KIT 2432
KIT 2436
KIT 2484
KIT 2490
KIT 2678
KIT 2885
KIT 4440
KIT 4445
KIT 4446
KIT RP180 1625
KIT 1554
KIT 2421
KIT 2432
KIT 2436
KIT 2484
KIT 2490
KIT 2678
KIT 2885
KIT 4441
KIT 4442
KIT 4445
KIT 4446
KIT RP180 1833
KIT 1592
KIT 1593
KIT 2318
KIT 2341
KIT 2363
KIT 4435
KIT 4436
KIT RS23180
KIT 1592
KIT 1593
KIT 2318
KIT 2341
KIT 2630
KIT 2699
KIT 4437
KIT 4438
A2-3200-A-1899S
KIT RS23180A
KIT 1592
KIT 1593
KIT 2318
KIT 2341
KIT 2373
KIT 2374
KIT 4437
KIT 4438
KIT RS23180A
KIT DESCRIPTION
Pinion bearing spacer kit
IAD nest without case, with spider
Bearing cage shim kit (pre 11-93)
Main differential nest with spider 2.35-46 spline
Helical gear kit
IAD nest without case, without spider
Helical gear cover update
Bearing cage shim kit (post 11-93)
Bearing kit all ratios
Bearing update kit - L.H.
Bearing update kit - R.H.
Major overhaul kit
Pinion bearing spacer kit
IAD nest without case, with spider
Bearing cage shim kit (pre 11-93)
Main differential nest with spider 2.35-46 spline
Helical gear kit
IAD nest without case, without spider
Helical gear cover update
Bearing cage shim kit (post 11-93)
Bearing kit all except 6.83, 7.17, 7.40 & 7.83 ratios
Bearing kit, 6.83, 7.17, 7.40 & 7.83 ratios
Bearing update kit - L.H.
Bearing update kit - R.H.
Major overhaul kit
Pinion bearing cage shims
Pinion bearing spacer kit
Main differential nest with spider 2.35-46 spline
Main differential nest without spider 2.35-46 spline
Main differential lock kit
Bearing kit all except 6.83, 7.17, 7.40 & 7.83 ratios
Bearing kit, 6.83, 7.17, 7.40 & 7.83 ratios
Major overhaul kit
Pinion bearing cage shims
Pinion bearing spacer kit
Main differential nest with spider 2.35-46 spline
Main differential nest without spider 2.35-46 spline
Main differential lock kit (except 1899 carrier)
Main differential lock kit (1899 carrier)
Bearing kit all except 6.83, 7.17, 7.40 & 7.83 ratios
Bearing kit, 6.83, 7.17, 7.40 & 7.83 ratios
Carrier update
Major overhaul kit
Pinion bearing cage shims
Pinion bearing spacer kit
Main differential nest with spider 2.35-46 spline
Main differential nest without spider 2.35-46 spline
Main differential nest with spider 2.56-50 spline
Main differential nest without spider 2.56-50 spline
Bearing kit all except 6.83, 7.17, 7.40 & 7.83 ratios
Bearing kit, 6.83, 7.17, 7.40 & 7.83 ratios
Major overhaul kit
29
AXLE MODEL TO CARRIER TO KIT CROSS REFERENCE
AXLE
MODEL
RT-48-180 RR-24-180
RT-52-180 RR-26-180
RT-52-185 RR-26-185
RT-58-180 RR-29-180
RT-58-185 RR-29-185
(cont)
(cont)
BASE
CARRIER
3200-J-1752
3200-K-1753
RT-48-380
RT-52-380
RT-58-380
3200-M-1625
RP-24-380
RP-26-380
RP-29-380
3200-M-1833
3200-M-1625
30
KIT
NUMBER
KIT 1592
KIT 1593
KIT 2318
KIT 2341
KIT 2373
KIT 2374
KIT 2791
KIT 2792
KIT 2793
KIT 4459
KIT 4460
KIT RR26185 1752
KIT RR26185A 1752
KIT 1554
KIT 2422
KIT 2432
KIT 2436
KIT 2491
KIT 2678
KIT 2885
KIT 4440
KIT 4445
KIT 4446
KIT RP380
MPS 3355
KIT 1554
KIT 2422
KIT 2432
KIT 2436
KIT 2491
KIT 2678
KIT 2885
KIT 4441
KIT 4442
KIT 4445
KIT 4446
KIT RP380A
MPS 3355
KIT 1554
KIT 2432
KIT 2436
KIT 2885
KIT 4450
KIT 4445
KIT 4446
KIT RR380
KIT DESCRIPTION
Pinion bearing cage shims
Pinion bearing spacer kit
Main differential nest with spider 2.35-46 spline
Main differential nest without spider 2.35-46 spline
Main differential nest with spider 2.56-50 spline
Main differential nest without spider 2.56-50 spline
Complete diff. lock retro-fit kit
Major diff. lock repair kit
Minor diff. lock repair kit
Bearing kit all except 6.83, 7.17, 7.40 & 7.83 ratios
Bearing kit, 6.83, 7.17, 7.40 & 7.83 ratios
Overhaul kit 2.35-46 spline. Ratios 2.93-6.43
Overhaul kit 2.35-46 spline. Ratios 6.83-7.83
Pinion bearing spacer kit
IAD nest without case, with spider
Bearing cage shim kit (pre 11-93)
Main differential nest with spider 2.35-46 spline
IAD nest without case, without spider
Helical gear cover update
Bearing cage shim kit (post 11-93)
Bearing kit all ratios
Bearing update kit - L.H.
Bearing update kit - R.H.
Major overhaul kit
Helical gear kit
Pinion bearing spacer kit
IAD nest without case, with spider
Bearing cage shim kit (pre 11-93)
Main differential nest with spider 2.35-46 spline
IAD nest without case, without spider
Helical gear cover update
Bearing cage shim kit (post 11-93)
Bearing kit all except 6.83, 7.17, 7.40 & 7.83 ratios
Bearing kit, 6.83, 7.17, 7.40 & 7.83 ratios
Bearing update kit - L.H.
Bearing update kit - R.H.
Major overhaul kit
Helical gear kit
Pinion bearing spacer kit
Bearing cage shim kit (pre 11-93)
Main differential nest with spider 2.35-46 spline
Bearing cage shim kit (post 11-93)
Bearing kit all ratios
Bearing update kit - L.H.
Bearing update kit - R.H.
Major overhaul kit
AXLE MODEL TO CARRIER TO KIT CROSS REFERENCE
AXLE
MODEL
RT-48-380 RR-24-380
RT-52-380 RR-26-380
RT-58-380
(cont)
BASE
CARRIER
3200-M-1833
RT-70-380
3200-M-1625
RP-35-380
3200-M-1833
3200-M-1625
3200-M-1833
KIT
NUMBER
KIT 1554
KIT 2432
KIT 2436
KIT 2885
KIT 4443
KIT 4444
KIT 4445
KIT 4446
KIT RR380A
KIT 1554
KIT 2422
KIT 2432
KIT 2437
KIT 2491
KIT 2678
KIT 2885
KIT 4440
KIT 4445
KIT 4446
KIT RP35380
MPS 3355
KIT 1554
KIT 2422
KIT 2432
KIT 2437
KIT 2491
KIT 2678
KIT 2885
KIT 4441
KIT 4442
KIT 4445
KIT 4446
KIT RP35380A
MPS 3355
KIT 1554
KIT 2432
KIT 2437
KIT 2885
KIT 4450
KIT 4445
KIT 4446
KIT RR35380
KIT 1554
KIT 2432
KIT 2437
KIT 2885
KIT 4443
KIT 4444
KIT 4445
KIT 4446
KIT RR35380A
KIT DESCRIPTION
Pinion bearing spacer kit
Bearing cage shim kit (pre 11-93)
Main differential nest with spider 2.35-46 spline
Bearing cage shim kit (post 11-93)
Bearing kit all except 6.83, 7.17, 7.40 & 7.83 ratios
Bearing kit, 6.83, 7.17, 7.40 & 7.83 ratios
Bearing update kit - L.H.
Bearing update kit - R.H.
Major overhaul kit
Pinion bearing spacer kit
IAD nest without case, with spider
Bearing cage shim kit (pre 11-93)
Main differential nest with spider 2.56-50 spline
IAD nest without case, without spider
Helical gear cover update
Bearing cage shim kit (post 11-93)
Bearing kit all ratios
Bearing update kit - L.H.
Bearing update kit - R.H.
Major overhaul kit
Helical gear kit
Pinion bearing spacer kit
IAD nest without case, with spider
Bearing cage shim kit (pre 11-93)
Main differential nest with spider 2.56-50 spline
IAD nest without case, without spider
Helical gear cover update
Bearing cage shim kit (post 11-93)
Bearing kit all except 6.83, 7.17, 7.40 & 7.83 ratios
Bearing kit, 6.83, 7.17, 7.40 & 7.83 ratios
Bearing update kit - L.H.
Bearing update kit - R.H.
Major overhaul kit
Helical gear kit
Pinion bearing spacer kit
Bearing cage shim kit (pre 11-93)
Main differential nest with spider 2.56-50 spline
Bearing cage shim kit (post 11-93)
Bearing kit all ratios
Bearing update kit - L.H.
Bearing update kit - R.H.
Major overhaul kit
Pinion bearing spacer kit
Bearing cage shim kit (pre 11-93)
Main differential nest with spider 2.56-50 spline
Bearing cage shim kit (post 11-93)
Bearing kit all except 6.83, 7.17, 7.40 & 7.83 ratios
Bearing kit, 6.83, 7.17, 7.40 & 7.83 ratios
Bearing update kit - L.H.
Bearing update kit - R.H.
Major overhaul kit
31
SERVICE KITS
A2-3200-A-1899S
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
A2-3200-A-1899
1
Carrier and cap assy.
2
A3261-A-1067
1
Housing - shift cylinder
3
2230-T-1190
1
Piston
4
5-X-521
1
O-ring
5
41-X-1368
1
Caging bolt
6
2244-Z-1222
1
Push rod
7
3296-D-1174
1
Fork - shift
8
2258-N-1262
1
Spring
9
2206-L-1156
1
Fitting - elbow
REMARKS
Malleable with screw-in diff. lock
KIT 1536
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
1229-L-2430
2
Snap ring - .088” thick
2
1229-M-2431
2
Snap ring - .091” thick
3
1229-N-2432
2
Snap ring - .094” thick
4
1229-P-2434
2
Snap ring - .097” thick
5
1229-Q-2435
2
Snap ring - .100” thick
6
1229-R-2436
2
Snap ring - .103” thick
7
1229-S-2437
2
Snap ring - .106” thick
8
1229-T-2438
2
Snap ring - .109” thick
9
1229-U-2439
2
Snap ring - .112” thick
REMARKS
Output shaft snap ring kit
KIT 1554
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
2203-U-7899
2
Spacer - .326” thick
2
2203-V-7900
2
Spacer - .327” thick
3
2203-W-7901
2
Spacer - .328” thick
4
2203-X-7902
2
Spacer - .329” thick
5
2203-Y-7903
2
Spacer - .330” thick
6
2203-Z-7904
2
Spacer - .331” thick
7
2203-A-7905
2
Spacer - .332” thick
8
2203-B-7906
2
Spacer - .338” thick
9
2203-C-7907
2
Spacer - .345” thick
10
2203-D-7908
2
Spacer - .352” thick
11
2203-E-7909
2
Spacer - .359” thick
REMARKS
Pinion bearing spacer kit.
KIT 1592
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
2803-Y-2755
4
Shim - .002 inch/.050 mm thick
2
2803-Z-2756
2
Shim - .005 inch/.125 mm thick
3
2803-A-2757
4
Shim - .008 inch/.200 mm thick
4
2803-B-2758
1
Shim - .020 inch/.500 mm thick
32
REMARKS
All
SERVICE KITS
KIT 1593
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
2803-D-2500
2
Spacer - .250 inch/6.35 mm thick
2
2803-E-2501
2
Spacer - .251 inch/6.38 mm thick
3
2803-F-2502
2
Spacer - .252 inch/6.40 mm thick
4
2803-N-2510
2
Spacer - .253 inch/6.43 mm thick
5
2803-G-2503
2
Spacer - .254 inch/6.45 mm thick
6
2803-H-2504
2
Spacer - .256 inch/6.50 mm thick
7
2803-J-2506
2
Spacer - .260 inch/6.60 mm thick
8
2803-K-2507
2
Spacer - .261 inch/6.63 mm thick
9
2803-L-2508
2
Spacer - .262 inch/6.65 mm thick
10
2803-M-2509
2
Spacer - .263 inch/6.68 mm thick
REMARKS
Pinion bearing spacers
KIT 1594
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
40-X-1182
16
Nut - lock
3200-C-1381, 3200-U-1399,
2
41-X-1358
16
Capscrew
Gear to case bolt kit to be used with gearsets without
3
1229-U-1503
16
Washer
counter bores in the ring gear bolt hole area only.
KIT 2318
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
2233-M-1001
4
Pinion - diff.
2
2234-C-1069
2
Side gear - diff. (2.36 in.-46 spline)
3
3278-W-335
1
Spider (differential cross)
4
1229-L-3002
2
Washer - side gear thrust
5
1229-K-3001
4
Washer - diff. pinion
REMARKS
Main diff. kit with spider., All
KIT 2341
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
1229-L-3002
2
Washer - side gear thrust
2
2234-C-1069
2
Side gear - diff. (2.36 in.-46 spline)
3
2233-M-1001
4
Pinion - diff.
4
1229-K-3001
4
Washer - diff. pinion
REMARKS
All, Main diff. kit less spider.
33
SERVICE KITS
KIT 2342
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
1227-N-1340
16
Nut
2
1229-U-1555
16
Washer
3
15-X-1700
16
Bolt
REMARKS
3200-M-1833, Gear to case bolt kit.
KIT 2363
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
1227-P-1056
1
Nut - sensor adjusting
2
2257-M-1235
1
Clip - sensor/switch
3
3107-Z-78
1
Shift collar
4
3237-W-1167
1
Sensor - switch assembly
5
3296-N-1184
1
Shift fork
6
KIT 2282
1
Diff. lock kit
REMARKS
3200-C-1381 & 3200-U-1399
KIT 2373
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
1229-K-3001
4
Washer - diff. pinion
3200-C-1381, 3200-U-1399,
2
1229-L-3002
2
Washer - side gear thrust
3200-K-1753, 3200-Q-1791,
3
2233-M-1001
4
Pinion - diff.
3200-J-1804, 3200-A-1899,
4
2234-P-1004
2
Side gear - diff. (2.56 in.-50 spline)
Main diff. kit with spider
5
3278-W-335
1
Spider (differential cross)
KIT 2374
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
1229-K-3001
4
Washer - diff. pinion
3200-C-1381, 3200-U-1399,
2
1229-L-3002
2
Washer - side gear thrust
3200-K-1753, 3200-Q-1791,
3
2233-M-1001
4
Pinion - diff.
3200-J-1804, 3200-A-1899,
4
2234-P-1004
2
Side gear - diff. (2.56 in.-50 spline)
Main diff. kit less spider
KIT 2421
ITEM
PART NUMBER
QTY.
1
2233-K-245
4
2
2234-F-890
3
3892-W-4963
4
DESCRIPTION
REMARKS
Pinion - diff.
IAD nest with spider, 3200-M-1833,
1
Side gear (2.00 in.-39 spline)
3200-M-1625
1
Side gear - helical gear
3278-N-300
1
Spider (differential cross)
5
1229-L-2742
1
Washer - side gear thrust
6
1229-Q-2929
4
Washer - pinion thrust
34
SERVICE KITS
KIT 2422
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
Pinion - diff.
IAD nest with spider, 3200-M-1625,
1
Side gear (2.00 in.-39 spline)
3200-M-1833
1
Side gear - helical gear
3278-N-300
1
Spider (differential cross)
5
1229-L-2742
1
Washer - side gear thrust
6
1229-Q-2929
4
Washer - pinion thrust
1
2233-K-245
4
2
2234-F-890
3
3892-Y-4965
4
KIT 2432
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
2203-C-6607
1
Shim - .003” thick
3200-M-1625, 3200-M-1833. Pre 11/93. See
2
2203-D-6608
1
Shim - .005” thick
KIT 2885 for post 11/93.
3
2203-E-6609
4
Shim - .010” thick
4
2203-Z-6604
3
Shim - .003” thick
5
2203-A-6605
4
Shim - .005” thick
6
2203-B-6606
1
Shim - .010” thick
KIT 2436
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
2234-C-1069
2
Side gear - diff. (2.36 in.-46 spline)
3200-M-1625, 3200-M-1833,
2
1229-L-3002
2
Washer - side gear thrust
With diff. spider
3
3278-Q-381
1
Spider - differential
4
2233-T-1112
4
Pinion - differential
5
1229-D-992
4
Washer - differential pinion thrust
KIT 2437
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
2234-G-1229
2
Side gear (2.56 in.-50 spline)
3200-M-1625, 3200-M-1833,
2
1229-L-3002
2
Washer - side gear thrust
With diff. spider
3
3278-Q-381
1
Spider - differential
4
2233-T-1112
4
Pinion - differential
5
1229-D-992
4
Washer - differential pinion thrust
KIT 2484
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
3892-W-4963
1
Side gear - helical gear
2
3892-J-4014
1
Helical gear - drive pinion
REMARKS
3200-M-1625, 3200-M-1833
35
SERVICE KITS
KIT 2490
ITEM
PART NUMBER
QTY.
1
2233-K-245
4
2
2234-F-890
3
3892-W-4963
4
5
DESCRIPTION
REMARKS
Pinion - diff.
IAD nest less spider, 3200-M-1625,
1
Side gear (2.00 in.-39 spline)
3200-M-1833
1
Side gear - helical gear
1229-L-2742
1
Washer - side gear thrust
1229-Q-2929
4
Washer - pinion thrust
KIT 2491
ITEM
PART NUMBER
QTY.
1
2233-K-245
4
2
2234-F-890
3
3892-Y-4965
4
5
DESCRIPTION
REMARKS
Pinion - diff.
3200-M-1625, 3200-M-1833,
1
Side gear (2.00 in.-39 spline)
IAD nest less spider
1
Side gear - helical gear
1229-L-2742
1
Washer - side gear thrust
1229-Q-2929
4
Washer - pinion thrust
KIT 2608
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
40-X-1182
16
Nut - lock
3200-C-1381, 3200-U-1399,
2
41-X-1334
16
Capscrew
3200-W-1791, 3200-J-1804,
3
1229-U-1503
16
Washer
Gear to case bolt kit to be used with gearsets with
counter bores in the ring gear bolt hole area only.
XpresswayPlus.ArvinMeritor.com
Don't forget about using XpresswayPlus for:
y Ordering parts online
y Order status
y Reference Library
y Price and availability
y The Company Store
y Invoice Lookup
y Literature
y Parts Catalog
y Dealer/Distributor locator
y Online e-mail or phone numbers for Customer Service, Information Services,
Marketing, Catalog, and eSupport
XpresswayPlus is easy to use, can reduce phone calls, and save you valuable time.
36
SERVICE KITS
KIT 2630
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
3266-F-1020
1
Cover
3200-W-1791, All bolt on style air cylinder cover
2
MWA-506
4
Washer
except 3200-J-1752 & 3200-K-1753.
3
2208-L-1000
1
Gasket
4
MS-210016-1
1
Capscrew
5
41-X-1364
4
Capscrew - cylinder cover
6
2208-H-944
1
Gasket
7
3196-F-32
1
Tube - air cylinder
8
5-X-1153
1
O-ring
9
2230-N-170
1
Piston
10
42-X-1027
1
Washer
11
2244-Y-51
1
Shift shaft
12
2258-L-714
1
Spring
13
43-X-1007
1
Pin - shift fork
14
41-X-1333
1
Capscrew
15
2257-N-40
1
Tie Strap
16
3296-N-1184
1
Shift fork
17
3107-L-1104
1
Shift collar
18
3237-W-1167
1
Sensor - switch assembly
19
1227-P-1056
1
Nut - sensor adjusting
20
2257-M-1235
1
Clip - sensor/switch
21
43-X-1006
1
Pin - shift shaft
KIT 2638
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
40-X-1233
1
Nut - lock
2
1229-W-4521
1
Washer
REMARKS
M45 x 1.5 nut thread.
37
SERVICE KITS
KIT 2678
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
A-3303-P-1030
1
Oil pump assy.
3200-M-1625, 3200-M-1833,
2
1229-E-1669
6
Washer - flat
Updates to current design pump.
3
MS-208045-1
6
Capscrew
4
2297-Z-5278
1
Adaptor - filter
5
3280-V-8394
1
Oil filter
6
3280-Z-8398
1
Filter - shield
7
A-3297-N-1288
1
Shaft - input assembly
8
A-3226-H-1126
1
Cage - bearing input
9
S-2814A-2
6
Capscrew
10
1229-C-1511
6
Washer - flat
11
3266-M-1313
1
Cover - helical gear
12
A-2297-D-5334
1
Screen filter
13
5-X-1034
1
O-ring
14
5-X-1343
1
O-ring
15
2258-Z-1118
1
Spring
16
2297-U-5273
1
Valve - relief
17
3296-Q-1187
1
Fork - shift
18
2244-Y-1221
1
Shaft - shif
19
A4-3261-Q-1057
1
I.A.D. shift cylinder assy.
20
2203-K-9241
1
Shim - .003 thick
21
2203-L-9242
1
Shim - .005 thick
22
2203-M-9243
4
Shim - .010 thick
23
HM-813844
1
Cone - bearing
24
A1-1205-X-2728
1
Oil seal assembly
25
1227-D-940
1
Nut - input
38
SERVICE KITS
KIT 2679
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
A-3303-P-1030
1
Oil pump assy.
3200-M-1625, 3200-M-1833
2
1229-E-1669
6
Washer - flat
Updates to current design 380.
3
MS-208045-1
6
Capscrew
4
2297-Z-5278
1
Adaptor - filter
5
3280-V-8394
1
Oil filter
6
3280-Z-8398
1
Filter - shield
7
A-3297-N-1288
1
Shaft - input assembly
8
A-3226-H-1126
1
Cage - bearing input
9
S-2814A-2
7
Capscrew
10
1229-C-1511
7
Washer - flat
11
3266-Q-1317
1
Helical Gear Cover
12
A-2297-D-5334
1
Screen filter
13
5-X-1343
1
O-ring
14
5-X-1034
1
O-ring
15
2258-Z-1118
1
Spring
16
2297-U-5273
1
Valve - relief
17
3296-Q-1187
1
Fork - shift
18
2244-Y-1221
1
Shaft - shif
19
A4-3261-Q-1057
1
I.A.D. shift cylinder assy.
20
A1-1205-X-2728
1
Seal Assembly
21
1227-D-940
1
Nut - input
22
HM-813844
1
Cone – bearing
23
2203-K-9241
1
Shim - .003 thick
24
2203-L-9242
1
Shim - .005 thick
25
2203-M-9243
4
Shim - .010 thick
KIT 2699
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
2244-Z-1222
1
Push rod
2
2257-M-1235
1
Clip - sensor/switch
3
2258-N-1262
1
Spring
4
3107-L-1104
1
Shift collar
5
3237-W-1167
1
Sensor - switch assembly
6
A-3261-A-1067
1
Housing – shift cylinder
7
3296-D-1174
1
Fork – shift
8
41-X-1368
1
Caging bolt
9
5-X-521
1
O-ring
REMARKS
Screw-in style air cylinder cover.
39
SERVICE KITS
KIT 2731
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
Carrier retrofit
With diff. lock (2.93-4.30 ratios), 3200-U-1399,
1
Differential case assy.
3200-W-1791
1
Cup - bearing
NP-579116
1
Cone - bearing
5
JM-822010
1
Cup - bearing
6
JM-822049
1
Cone - bearing
7
2214-G-1125
1
Adjusting ring - bearing
8
2214-S-1137
1
Adjusting ring - bearing
1
A2-3200-A-1899S
1
2
A-1-3235-K-2143
3
NP-022042
4
KIT 2731A
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
A2-3200-A-1899S
1
Carrier retrofit
With diff. lock (4.56-7.83 ratios), 3200-U-1399,
2
A-3235-M-2145
1
Differential case assy.
3200-W-1791
3
NP-022042
1
Cup - bearing
4
NP-579116
1
Cone - bearing
5
JM-822010
1
Cup - bearing
6
JM-822049
1
Cone - bearing
7
2214-G-1125
1
Adjusting ring - bearing
8
2214-S-1137
1
Adjusting ring - bearing
KIT 2732
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
A2-3200-J-1804
1
Carrier & cap assembly
Less diff.lock (2.93-4.30 ratrios), 3200-U-1399,
2
A-3235-K-2143
1
Differential case assy.
3200-W-1791
3
NP-022042
1
Cup - bearing
4
NP-579116
1
Cone - bearing
5
JM-822010
1
Cup - bearing
6
JM-822049
1
Cone - bearing
7
2214-G-1125
1
Adjusting ring - bearing
8
2214-S-1137
1
Adjusting ring - bearing
KIT 2732A
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
A2-3200-J-1804
1
Carrier & cap assembly
Less diff. lock (4.56-7.83 ratios), 3200-U-1399,
2
A-1-3235-M-2145
1
Differential case assy.
3200-W-1791
3
NP-022042
1
Cup - bearing
4
NP-579116
1
Cone - bearing
5
JM-822010
1
Cup - bearing
6
JM-822049
1
Cone - bearing
7
2214-G-1125
1
Adjusting ring - bearing
8
2214-S-1137
1
Adjusting ring - bearing
40
SERVICE KITS
KIT 2744
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
NP-022042
1
Cup - bearing
3200-C-1381, 3200-U-1399, 3200-W-1791,
2
NP-579116
1
Cone - bearing
3200-J-1804, 3200-A-1899, 3200-A-1899,
3200-J-1752, 3200-K-1753
KIT 2791
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
1229-U-1503
2
Washer
3200-J-1752, 3200-K-1753,
2
2208-H-944
1
Gasket
Diff. lock retrofit kit with bolt-on style air cyl. cover for
3
2208-L-1000
1
Gasket
2.35 in.-46 spline collar.
4
2230-N-170
1
Piston
(For complete retrofit, must change passenger side
5
2244-Z-52
1
Shifter shaft
axle shaft with an extended splined axle shaft for
6
2258-L-714
1
Spring
DCDL. See pages 21-23 for axle shaft listings.)
7
3107-A-1041
1
Collar
8
3196-F-32
1
Tube - air cylinder
9
3237-W-1167
1
Sensor - switch assembly
10
3266-F-1020
1
Cover
11
3296-A-1197
1
Shift fork
12
41-X-1364
4
Capscrew
13
41-X-1333
1
Capscrew
14
43-X-1006
1
Pin - shift shaft
15
5-X-1153
1
O-ring
16
MS-210016-1
1
Capscrew
17
MWA-506
4
Washer
KIT 2791A
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
3266-F-1020
1
Cover
3200-J-1752, 3200-K-1753.
2
3296-A-1197
1
Shift fork
Diff. lock retrofit kit with bolt-on style air cyl. cover for
3
3107-V-1010
1
Collar
2.56 in.-50 spline collar.
4
2244-Z-52
1
Shifter shaft
(For complete retrofit, must change passenger side
5
3196-F-32
1
Tube - air cylinder
axle shaft with an extended splined axle shaft for
6
2230-N-170
1
Piston
DCDL. See pages 21-23 for axle shaft listings.)
7
43-X-1006
1
Pin - shift shaft
8
2258-L-714
1
Spring
9
5-X-1153
1
O-ring
10
2208-H-944
1
Gasket
11
MWA-506
4
Washer
12
41-X-1364
4
Capscrew
13
2208-L-1000
1
Gasket
14
MS-210016-1
1
Capscrew
15
41-X-1333
1
Capscrew
16
3237-W-1167
1
Sensor - switch assembly
17
1229-U-1503
2
Washer
41
SERVICE KITS
KIT 2792
ITEM
PART NUMBER
QTY.
1
2208-H-944
1
2
2208-L-1000
3
2230-N-170
4
DESCRIPTION
REMARKS
Gasket
3200-J-1752, 3200-K-1753,
1
Gasket
Major diff. lock repair kit.
1
Piston
2244-Z-52
1
Shifter shaft
5
2258-L-714
1
Spring
6
3196-F-32
1
Tube - air cylinder
7
3266-F-1020
1
Cover
8
41-X-1094
4
Capscrew
9
41-X-1333
1
Capscrew
10
43-X-1006
1
Pin - shift shaft
11
5-X-1153
1
O-ring
12
MS-210016-1
1
Capscrew
13
MWA-506
4
Washer
KIT 2793
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
2208-H-944
1
Gasket
3200-J-1752, 3200-K-1753,
2
2208-L-1000
1
Gasket
Minor diff. lock repair kit.
3
2230-N-170
1
Piston
4
2258-L-714
1
Spring
5
43-X-1006
1
Pin - shift shaft
6
5-X-1153
1
O-ring
KIT 2885
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
2203-K-9241
1
Shim - .003” thick
2
2203-L-9242
1
Shim - .005” thick
3
2203-M-9243
4
Shim - .010” thick
4
2203-Z-6604
4
Shim - .003” thick
5
2203-A-6605
4
Shim - .005” thick
6
2203-B-6606
1
Shim - .010” thick
REMARKS
Post 11/93. See KIT 2432 for pre 11/93.
KIT 2886
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
2203-K-9241
3
Shim - .003” thick
2
2203-L-9242
3
Shim - .005” thick
3
2203-M-9243
4
Shim - .010” thick
42
REMARKS
Post 11/93.
SERVICE KITS
KIT 4435
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
H-715334
1
Cone - drive pinion outer bearing
3200-C-1381, 3200-U-1399,
2
H-715311
1
Cup - drive pinion outer bearing
All ratios except 6.83, 7.17, 7.40 & 7.83
3
1228-V-594
1
Cone - drive pinion inner bearing
4
9220
1
Cup - drive pinion inner bearing
5
JHM-720210
1
Cup - diff. bearing L.H.
6
JHM-720249
1
Cone - diff. bearing L.H.
7
1228-S-1267
1
Spigot bearing
8
A1-1205-A-2731
1
Oil seal assembly
9
64700
1
Cup - diff. bearing R.H.
10
64450
1
Cone - diff. bearing R.H.
KIT 4436
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
H-715334
1
Cone - drive pinion outer bearing
6.83, 7.17, 7.40 & 7.83 ratios only, 3200-C-1381,
2
H-715311
1
Cup - drive pinion outer bearing
3200-U-1399
3
1228-V-594
1
Cone - drive pinion inner bearing
4
9220
1
Cup - drive pinion inner bearing
5
JHM-720210
1
Cup - diff. bearing L.H.
6
JHM-720249
1
Cone - diff. bearing L.H.
7
1228-A-261
1
Spigot bearing
8
A1-1205-A-2731
1
Oil seal assembly
9
64700
1
Cup - diff. bearing R.H.
10
64450
1
Cone - diff. bearing R.H.
KIT 4437
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
H-715334
1
Cone - drive pinion outer bearing
All ratios except 6.83, 7.17, 7.40 & 7.83,
2
H-715311
1
Cup - drive pinion outer bearing
3200-W-1791, 3200-A-1899, 3200-J-1804,
3
1228-V-594
1
Cone - drive pinion inner bearing
3200-S-1839
4
9220
1
Cup - drive pinion inner bearing
5
NP-022042
1
Cup - bearing
6
NP-579116
1
Cone - bearing
7
1228-S-1267
1
Spigot bearing
8
A1-1205-A-2731
1
Oil seal assembly
9
JM-822010
1
Cup - bearing
10
JM-822049
1
Cone - bearing
43
SERVICE KITS
KIT 4438
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
H-715334
1
Cone - drive pinion outer bearing
6.83, 7.17, 7.40 & 7.83 ratios only, 3200-W-1791,
2
H-715311
1
Cup - drive pinion outer bearing
3200-A-1899, 3200-J-1804, 3200-S-1839
3
1228-V-594
1
Cone - drive pinion inner bearing
4
9220
1
Cup - drive pinion inner bearing
5
NP-022042
1
Cup - bearing
6
NP-579116
1
Cone - bearing
7
1228-A-261
1
Spigot bearing
8
A1-1205-A-2731
1
Oil seal assembly
9
JM-822010
1
Cup - bearing
10
JM-822049
1
Cone - bearing
KIT 4440
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
A-1228-R-1266
1
Race - pinion bearing outer (spigot)
2
78551
2
Cup - pinion bearing inner and outer
3
78250AC
2
Cone - pinion bearing inner and outer
4
52387P
1
Cone - diff. bearing L.H.
5
52618P
1
Cup - diff bearing L.H.
6
NP-928171
1
Cone - diff. bearing R.H.
7
NP-718759
1
Cup - diff. bearing R.H.
8
A-1228-Z-572
1
Bearing - pump idler gear
9
382AK
2
Cup - bearing
10
385AK
2
Cone - bearing
11
A-1205-C-1927
1
Oil seal assembly
12
1229-T-4076
1
Snap ring
13
A1-1205-X-2728
1
Oil seal assembly
14
JM-515610
1
Cup - rear side gear bearing
15
JM-515649
1
Cone - rear side gear bearing
16
HM-813810
1
Cup - bearing
17
HM-813844
1
Cone - bearing
18
1221-R-1006
1
Cup - bearing
19
1221-S-1007
1
Cone - bearing
44
REMARKS
3200-M-1625
SERVICE KITS
KIT 4441
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
1229-L-1624
1
Snap ring
3200-M-1833
2
78551
2
Cup - pinion bearing inner and outer
All ratios except 6.83, 7.17, 7.40 & 7.83
3
78250AC
2
Cone - pinion bearing inner and outer
For rear-rear 380s (which are less IAD) use
4
52387P
1
Cone - diff. bearing L.H.
KIT 4443.
5
52618P
1
Cup - diff bearing L.H.
6
NP-718759
1
Cup - diff. bearing R.H.
7
NP-928171
1
Cone - diff. bearing R.H.
8
A-1228-Z-572
1
Bearing - pump idler gear
9
382A
2
Cup - bearing
10
385A
2
Cone - bearing
11
A-1205-C-1927
1
Oil seal assembly
12
1228-S-1267
1
Spigot bearing
13
A1-1205-X-2728
1
Oil seal assembly
14
JM-515610
1
Cup - rear side gear bearing
15
JM-515649
1
Cone - rear side gear bearing
16
HM-813810
1
Cup - bearing
17
HM-813844
1
Cone - bearing
KIT 4442
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
Spigot bearing
3200-M-1833
1
Snap ring
6.83, 7.17, 7.40 & 7.83 ratios only.
2
Cup - pinion bearing inner and outer
For rear-rear 380s (which are less IAD) use
78250AC
2
Cone - pinion bearing inner and outer
KIT 4444.
5
52387P
1
Cone - diff. bearing L.H.
6
52618P
1
Cup - diff bearing L.H.
7
NP-718759
1
Cup - diff. bearing R.H.
8
NP-928171
1
Cone - diff. bearing R.H.
1
1228-A-261
1
2
1229-K-1623
3
78551
4
9
A-1228-Z-572
1
Bearing - pump idler gear
10
382A
2
Cup - bearing
11
385A
2
Cone - bearing
12
A-1205-C-1927
1
Oil seal assembly
13
A1-1205-X-2728
1
Oil seal assembly
14
JM-515610
1
Cup - rear side gear bearing
15
JM-515649
1
Cone - rear side gear bearing
16
HM-813810
1
Cup - bearing
17
HM-813844
1
Cone - bearing
45
SERVICE KITS
KIT 4443
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
1228-S-1267
1
Spigot bearing
3200-M-1833
2
78551
2
Cup - pinion bearing inner and outer
All less Inter-axle and less pump except ratios 6.83,
3
78250AC
2
Cone - pinion bearing inner and outer
7.17, 7.40 & 7.83
4
52387P
1
Cone - diff. bearing L.H.
5
52618P
1
Cup - diff bearing L.H.
6
NP-718759
1
Cup - diff. bearing R.H.
7
NP-928171
1
Cone - diff. bearing R.H.
8
R945008
1
Oil seal assembly
9
29620
1
Cup - input shaft inner bearing
10
29685
1
Cone - input shaft inner bearing
11
493
1
Cup - input shaft outer bearing
12
496
1
Cone - input shaft outer bearing
13
1229-L-1624
1
Snap ring
KIT 4444
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
1228-A-261
1
Spigot bearing
3200-M-1833
2
78551
2
Cup - pinion bearing inner and outer
All less Inter-axle and less pump for 6.83, 7.17, 7.40
3
78250AC
2
Cone - pinion bearing inner and outer
& 7.83 ratios only
4
52387P
1
Cone - diff. bearing L.H.
5
52618P
1
Cup - diff bearing L.H.
6
NP-718759
1
Cup - diff. bearing R.H.
7
NP-928171
1
Cone - diff. bearing R.H.
8
R945008
1
Oil seal assembly
9
29620
1
Cup - input shaft inner bearing
10
29685
1
Cone - input shaft inner bearing
11
493
1
Cup - input shaft outer bearing
12
496
1
Cone - input shaft outer bearing
13
1229-K-1623
1
Snap ring
KIT 4445
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
NP-718759
1
Cup - diff. bearing L.H.
3200-M-1625, 3200-M-1833,
2
NP-928171
1
Cone - diff. bearing L.H.
Diff. bearing upgrade L.H.
KIT 4446
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
52387P
1
Cone - diff. bearing R.H.
3200-M-1625, 3200-M-1833,
2
52618P
1
Cup - diff bearing R.H.
Diff. bearing upgrade R.H.
46
SERVICE KITS
KIT 4450
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
78551
2
Cup - pinion bearing inner and outer
2
78250AC
2
Cone - pinion bearing inner and outer
3
52387P
1
Cone - diff. bearing L.H.
4
52618P
1
Cup - diff bearing L.H.
5
NP-928171
1
Cone - diff. bearing R.H.
6
NP-718759
1
Cup - diff. bearing R.H.
7
29620
1
Cup - input shaft inner bearing
8
493
1
Cup - input shaft outer bearing
9
29685
1
Cone - input shaft inner bearing
10
496
1
Cone - input shaft outer bearing
11
1221-R-1006
1
Cup - bearing
12
R945008
1
Oil seal assembly
13
A5-1228-R-1266
1
Roller bearing assembly
REMARKS
3200-M-1625, All less I.A.D. and less pump.
KIT 4459
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
A1-1205-A-2731
1
Oil seal assembly
3200-J-1752, 3200-K-1753,
2
H-715334
1
Cone - drive pinion outer bearing
All ratios except 6.83, 7.17, 7.40 and 7.83
3
H-715311
1
Cup - drive pinion outer bearing
4
1228-V-594
1
Cone - drive pinion inner bearing
5
9220
1
Cup - drive pinion inner bearing
6
64700
1
Cup - diff. bearing R.H.
7
64450
1
Cone - diff. bearing R.H.
8
1228-S-1267
1
Spigot bearing
9
JHM-720249
1
Cone - diff. bearing L.H.
10
JHM-720210
1
Cup - diff. bearing L.H.
KIT 4460
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
A1-1205-A-2731
1
Oil seal assembly
3200-J-1752, 3200-K-1753,
2
H-715334
1
Cone - drive pinion outer bearing
6.83, 7.17, 7.40 and 7.83 ratios only.
3
H-715311
1
Cup - drive pinion outer bearing
4
1228-V-594
1
Cone - drive pinion inner bearing
5
9220
1
Cup - drive pinion inner bearing
6
64700
1
Cup - diff. bearing R.H.
7
64450
1
Cone - diff. bearing R.H.
8
1228-A-261
1
Spigot bearing
9
JHM-720249
1
Cone - diff. bearing L.H.
10
JHM-720210
1
Cup - diff. bearing L.H.
47
SERVICE KITS
KIT 4744
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
10-X-1595
4
Bolt
3200-K-1753, 3200-J-1752,
2
10-X-1597
2
Blot
Carrier to axle housing bolt kit
3
10-X-1599
4
Bolt
4
1229-W-1557
14
Washer
5
4-X-1445
4
Stud
6
N-110-1
4
Nut
KIT RP180 1625
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
KIT 2436
1
Main differential kit
3200-M-1625, Forward carrier with I.A.D. and main
2
KIT 1554
1
Spacer kit
differential.
3
KIT 2432
1
Shim kit
4
KIT 2421
1
I.A.D. kit
5
KIT 1536
1
Shim kit
6
KIT 4440
1
Bearing and seal kit
7
1227-D-940
1
Nut - input
8
1227-J-946
1
Nut - output shaft
9
1227-P-900
1
Nut - pinion
KIT RP180 1833
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
Nut - pinion
3200-M-1833, Forward carrier with I.A.D. and main
1
Spigot bearing
differential.
1
Snap ring
1227-D-940
1
Nut - input
5
1227-J-946
1
Nut - output shaft
6
KIT 2432
1
Shim kit
7
KIT 2421
1
I.A.D. kit
8
KIT 1536
1
Shim kit
1
1227-P-900
1
2
1228-A-261
3
1229-K-1623
4
9
KIT 1554
1
Spacer kit
10
KIT 2436
1
Main differential kit
11
KIT 2886
1
Shim kit
12
KIT 4441
1
Bearing and seal kit
KIT RP35380
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
KIT 1554
1
Spacer kit
3200-M-1625, Forward carrier with I.A.D. and main
2
KIT 2432
1
Shim kit
differential.
3
KIT 1536
1
Shim kit
4
1227-P-900
1
Nut - pinion
5
1227-D-940
1
Nut - input
6
1227-J-946
1
Nut - output shaft
48
SERVICE KITS
KIT RP35380A
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
KIT 2437
1
Main differential kit
3200-M-1833, Forward carrier with I.A.D. and main
2
KIT 1554
1
Spacer kit
differential.
3
KIT 2432
1
Shim kit
4
KIT 2422
1
I.A.D. kit
5
KIT 1536
1
Shim kit
6
1227-P-900
1
Nut - pinion
7
1227-D-940
1
Nut - input
8
1227-J-946
1
Nut - output shaft
9
KIT 4441
1
Bearing and seal kit
10
1228-A-261
1
Spigot bearing
11
1229-K-1623
1
Snap ring
12
KIT 2886
1
Shim kit
KIT RP380
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
KIT 2436
1
Main differential kit
3200-M-1625, For all double reduction front units
2
KIT 1554
1
Spacer kit
with pump and I.A.D. except 70,000 lb. capacity
3
KIT 2432
1
Shim kit
tandems.
4
KIT 2422
1
I.A.D. kit
5
KIT 1536
1
Shim kit
6
1227-P-900
1
Nut - pinion
7
1227-D-940
1
Nut - input
8
1227-J-946
1
Nut - output shaft
9
KIT 4440
1
Bearing and seal kit
KIT RP380A
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
KIT 2436
1
Main differential kit
3200-M-1833, For all double reduction front units
2
KIT 1554
1
Spacer kit
with pump and I.A.D. except 70,000 lb. capacity
3
KIT 2432
1
Shim kit
tandems.
4
KIT 2422
1
I.A.D. kit
5
KIT 1536
1
Shim kit
6
KIT 2886
1
Shim kit
7
1227-P-900
1
Nut - pinion
8
1227-D-940
1
Nut - input
9
1227-J-946
1
Nut - output shaft
10
KIT 4441
1
Bearing and seal kit
11
1228-A-261
1
Spigot bearing
12
1229-K-1623
1
Snap ring
49
SERVICE KITS
KIT RR26185-1752
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
KIT 1592
1
Shim kit
2.35-46 spline. 3200-J-1752, 3200-K-1753.
2
KIT 1593
1
Spacer kit
Ratios 2.93-6.43
3
KIT 2318
1
Main diff. kit with spider
4
KIT 4459
1
Bearing and seal kit
KIT RR26185A-1752
ITEM
PART NUMBER
QTY.
DESCRIPTION
REMARKS
1
KIT 1592
1
Shim kit
2.35-46 spline. 3200-J-1752, 3200-K-1753.
2
KIT 1593
1
Spacer kit
Ratios 6.83-7.83
3
KIT 2318
1
Main diff. kit with spider
4
KIT 4460
1
Bearing and seal kit
KIT RR35380
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
KIT 2437
1
Main differential kit
2
KIT 1554
1
Spacer kit
3
KIT 2432
1
Shim kit
4
1227-P-900
1
Nut - pinion
5
1227-J-946
1
Nut - output shaft
6
KIT 4450
1
Bearing and seal kit
REMARKS
3200-M-1625
KIT RR35380A
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
KIT 2437
1
Main differential kit
2
KIT 1554
1
Spacer kit
3
KIT 2432
1
Shim kit
4
1227-P-900
1
Nut - pinion
5
1227-J-946
1
Nut - output shaft
6
KIT 4443
1
Bearing and seal kit
7
1228-A-261
1
Spigot bearing
8
1229-K-1623
1
Snap ring
9
KIT 2886
1
Shim kit
REMARKS
3200-M-1833
KIT RR380
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
KIT 2436
1
Main differential kit
2
KIT 1554
1
Spacer kit
3
KIT 2432
1
Shim kit
4
1227-P-900
1
Nut - pinion
5
1227-J-946
1
Nut - output shaft
6
KIT 4450
1
Bearing and seal kit
50
REMARKS
3200-M-1625
KIT RR380A
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
KIT 1554
1
Spacer kit
2
KIT 2432
1
Shim kit
3
KIT 2886
1
Shim kit
4
1227-J-946
1
Nut - output shaft
5
1227-P-900
1
Nut - pinion
6
1228-A-261
1
Spigot bearing
7
KIT 2436
1
Main differential kit
8
KIT 4443
1
Bearing and seal kit
REMARKS
3200-M-1833
KIT RS23180
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
KIT 2318
1
Main diff. kit with spider
2
KIT 1592
1
Shim kit
3
KIT 1593
1
Spacer kit
4
KIT 4435
1
Bearing and seal kit
REMARKS
3200-C-1381, 3200-U-1399
KIT RS23180A
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
KIT 1592
1
Shim kit
2
KIT 1593
1
Spacer kit
3
KIT 2318
1
Main diff. kit with spider
4
KIT 4437
1
Bearing and seal kit
REMARKS
3200-W-1791, 3200-A-1899, 3200-J-1804
MPS 3355
ITEM
PART NUMBER
QTY.
DESCRIPTION
1
3892-Y-4965
1
Side gear - helical gear
2
3892-B-4708
1
Helical gear - drive pinion
REMARKS
3200-M-1625, 3200-M-1833
51
XpresswayPlus.ArvinMeritor.com
Don't forget about using XpresswayPlus for:
y Ordering parts online
y Order status
y Reference Library
y Price and availability
y The Company Store
y Invoice Lookup
y Literature
y Parts Catalog
y Dealer/Distributor locator
y Online e-mail or phone numbers for Customer Service, Information Services,
Marketing, Catalog, and eSupport
XpresswayPlus is easy to use, can reduce phone calls, and save you valuable time.
52
WHAT YOU NEED:
WHERE TO LOOK:
ACCOUNT CHANGE
AFTERMARKET & PRODUCTION ASSEMBLIES
APPLICATION INFORMATION
BILL-OF-LADING NUMBER
BILL-OF-MATERIAL
BULLETINS
CONTACT NAMES & NUMBERS
FIELD SUPPORT REPRESENTATIVES
INVOICE (VIEW & PRINT)
NEWSLETTER
ORDER DETAILS
ORDER HISTORY FILE
ORDER MERCHANDISE
ORDER SUBMIT
ORDER SUBMIT - STOCK UPLOAD (MULTIPLE LINES)
PART DETAILS
PART IMAGES
PART NUMBER COMPARISON
PARTS BOOKS
PASSWORD CHANGE
PRICE (LIST)
PRICE (NET) & AVAILABILITY
PRODUCT BROCHURES
PRODUCT UPDATES
PROOF-OF-DELIVERY
REQUEST-FOR-QUOTATION (FOR MERITOR BRAND)
SALES LITERATURE
SEND QUESTIONS, COMMENTS, ISSUES
SHIPPER NUMBER
TECH TIPS
TRACKING NUMBER
WARRANTY INFORMATION
WHERE-USED INFORMATION
CUSTOMER SERVICE
CATALOG
CATALOG
ORDER STATUS
CATALOG
REFERENCE LIBRARY
CUSTOMER SERVICE
CUSTOMER SERVICE
ORDER STATUS
REFERENCE LIBRARY
ORDER STATUS
ORDER STATUS
COMPANY STORE
CREATE NEW ORDER
CREATE NEW ORDER
CATALOG
CATALOG
CATALOG
REFERENCE LIBRARY
CUSTOMER SERVICE
CATALOG
PRICE & AVAILABILITY
REFERENCE LIBRARY
REFERENCE LIBRARY
ORDER STATUS
PRICE REQUEST
REFERENCE LIBRARY
CONTACT US
ORDER STATUS
REFERENCE LIBRARY
ORDER STATUS
REFERENCE LIBRARY
CATALOG
NUMERICAL PARTS LISTING
PART NUMBER
PAGE
PART NUMBER
PAGE
PART NUMBER
PAGE
4-X-1051
17
A-1205-S-1657
18
1229-R-2436
16
4-X-1929
17
A-1205-Z-1820
18
1229-S-2437
16
5-X-521
14
A-1205-C-1927
16
1229-T-2438
16
5-X-1034
5
A-1205-R-2410
18
1229-U-2439
16
5-X-1153
14
A-1205-Q-2591
9
1229-L-2742
4
5-X-1198
14
A1-1205-X-2728
5, 7
1229-Q-2929
4
10-X-1334
5
1220-K-89
11
1229-K-3001
13
10-X-1595
17
1220-S-1085
1
1229-L-3002
2, 13
10-X-1596
17
1227-R-330
18
1229-T-3062
16
10-X-1597
17
1227-F-448
18
1229-F-4062
4
10-X-1599
17
1227-D-472
2, 10
1229-T-4076
2
10-X-1601
17
1227-W-517
18
1229-D-4632
9
10-X-1669
3, 5
1227-A-547
18
1229-F-4634S
18
15-X-1167
2, 10
1227-P-900
3
1244-U-879
18
15-X-1698
2
1227-D-940
5, 7
1246-M-455
2
15-X-1699
2
1227-J-946
7, 16
1246-Q-615
6
15-X-1700
1
1227-P-1056
15
1246-P-1134
11
40-X-1015
10
1227-M-1339
1
1250-E-473
17
40-X-1182
12, 14
1227-N-1340
1
1250-N-1080
4
40-X-1233
9
1228-A-261
3, 10
1250-U-1217
11
41-X-1018
11
A-1228-Z-572
6
1829-J-738
6
41-X-1020
10
1228-V-594
9
2203-Z-6604
3
41-X-1022
11
A4-1228-R-1266
3
2203-A-6605
3
41-X-1037
11
A5-1228-R-1266
3
2203-B-6606
3
41-X-1043
9
1228-S-1267
3, 10
2203-C-6607
4
41-X-1080
11, 15
1229-V-48
18
2203-D-6608
4
41-X-1109
14
1229-D-992
2
2203-E-6609
4
41-X-1275
14
1229-U-1503
2, 11, 12, 14, 15
2203-U-7899
3, 7
41-X-1333
14
1229-C-1511
3, 4, 6
2203-V-7900
3, 7
41-X-1334
12
1229-E-1513
16
2203-W-7901
3, 7
41-X-1358
12
1229-U-1555
1
2203-X-7902
3, 7
41-X-1364
15
1229-W-1557
1, 12, 14, 17
2203-Y-7903
3, 7
41-X-1368
14
1229-K-1597
4, 5, 7
2203-Z-7904
3, 7
42-X-1024
10
1229-K-1623
2, 10
2203-A-7905
3, 7
42-X-1027
14
1229-L-1624
2, 10
2203-B-7906
3, 7
43-X-1006
14
1229-M-1625
2
2203-C-7907
3, 7
43-X-1007
14
1229-B-1666
7
2203-D-7908
3, 7
43-X-1015
11
1229-E-1669
1, 5, 6, 7
2203-E-7909
3, 7
45-X-1003
11
1229-N-1730
5, 7, 9
2203-K-9241
4
45-X-1008
11
1229-T-1736
7, 16
2203-L-9242
4
A2-3260-N-1262
25
1229-K-2429
3
2203-M-9243
4
1199-B-1666
18
1229-L-2430
16
2208-H-944
14
1199-R-2176
11
1229-M-2431
16
2208-L-1000
15
A-1199-Z-3328
2
1229-N-2432
16
2214-K-89
1
A-1199-R-1048
17
1229-P-2434
16
2214-M-91
1
A-1199-W-4053
16
1229-Q-2435
16
2214-Q-277
11
53
NUMERICAL PARTS LISTING
PART NUMBER
PAGE
PART NUMBER
PAGE
PART NUMBER
PAGE
2214-S-279
11
2803-P-2512
9
3202-G-9159
21
2214-W-1011
11
2803-Y-2755
9
3202-P-9246
23
2214-X-1012
11
2803-Z-2756
9
3202-Q-9247
23
2214-G-1125
11
2803-A-2757
9
3202-R-9248
22
2214-S-1137
11
2803-B-2758
9
3202-S-9249
22
2230-N-170
14
3107-P-16
4
3202-K-9267
21
2230-T-1190
14
3107-Z-78
14
3202-M-9269
22
2233-K-245
4
3107-V-1010
14
3202-J-9344
21
2233-M-1001
13
3107-A-1041
14
3202-L-9346
22
2233-T-1112
2
3107-L-1104
14
3202-J-9370
21
2234-F-890
3
3107-N-1106
14
3202-L-9372
22
2234-P-1004
13
3196-T-20
7
3202-N-9374
22
2234-C-1069
2, 13
3196-U-21
7
3202-E-9391
21
2234-G-1229
2
3196-B-28
6
3202-F-9392
21
2244-Y-51
14
3196-F-32
14
3202-G-9393
21
2244-Z-52
14
A2-3200-C-1381
10
3202-J-9396
22
2244-K-1025
5
A2-3200-M-1625
2
3202-N-9400
22
2244-V-1114
14
A2-3200-J-1752
10
3202-Q-9403
22
2245-E-31
18
A2-3200-K-1753
10
3202-W-9409
22
2257-S-1033
7
A2-3200-J-1804
10
3202-Y-9411
23
2258-U-411
5
A2-3200-M-1833
2
3202-R-9456
22
2258-L-714
14
A2-3200-A-1899S
10, 32
3202-T-9458
22
2258-Z-1118
4
3202-H-6768
21
3202-E-9495
21
2258-N-1262
14
3202-R-6778
21
3202-F-9496
21
2296-A-105
7
3202-S-6779
21
3202-G-9497
22
2296-B-106
7
3202-L-7734
22
3202-K-9501
21
2296-F-1098
7
3202-M-7735
21
3202-L-9502
22
2296-G-1099
7
3202-W-7745
21
3202-J-9552
22
2297-E-2293
6
3202-M-7787
23
3202-L-9554
22
2297-X-2494
5
3202-N-7788
23
3202-K-9579
21
2297-C-3799
7
3202-C-7803
22
3202-L-9580
21
2297-T-4180
12
3202-D-7804
22
3202-M-9581
22
2297-U-5273
4
3202-X-8110
22
3202-W-9643
21
2297-Z-5278
6
3202-Y-8111
21
3202-Y-9645
21
A-2297-D-5334
6
3202-Z-8112
21
3202-C-9805
23
2297-L-5420
6
3202-H-8666
22
3202-D-9806
23
2297-A-7021
16, 17
3202-B-8816
22
3206-T-1476
22
2297-C-7049
14
3202-G-9003
22
3206-U-1477
21
2803-D-2500
9
3202-H-9004
21
3221-H-8
6
2803-E-2501
9
3202-W-9097
22
A-3226-Z-598
3
2803-F-2502
9
3202-X-9098
21
A-3226-J-790
4
2803-H-2504
9
3202-Y-9125
21
A-3226-B-860
9
2803-J-2506
9
3202-C-9129
22
A-3226-Q-901
16
2803-K-2507
9
3202-P-9142
22
A1-3226-Q-901
16
2803-L-2508
9
3202-Q-9143
21
A-3226-V-1010
9
2803-M-2509
9
3202-V-9148
21
A-3226-H-1126
4
2803-N-2510
9
3202-W-9149
21
A-3230-N-1028
2
54
NUMERICAL PARTS LISTING
PART NUMBER
PAGE
PART NUMBER
PAGE
PART NUMBER
PAGE
A-3230-A-1041
14
A-3260-U-73
24
3278-W-335
13
A-3230-C-1043
14
A2-3260-U-73
24
3278-Q-381
2
A-3230-E-1045
2
A2-3260-W-75
24
3280-V-5040
5
A-3235-X-1532
3
A-3260-Q-95
26
3280-V-8394
5
A1-3235-X-1532
3
A2-3260-Q-95
26
3280-Z-8398
5
A-3235-F-1618
13
3260-G-111
24
A-3280-F-8430
5
A5-3235-F-1618
12
3260-L-116
24
3296-L-90
4
A6-3235-F-1618
13
A2-3260-L-116
24
3296-D-1174
14
A-3235-H-1620
13
3260-M-117
26
3296-N-1184
14
A3-3235-H-1620
13
A2-3260-M-117
26
3296-Q-1187
4
A5-3235-H-1620
13
A2-3260-U-151
27
3296-A-1197
14
A-3235-T-1944
1
A-3260-R-356
24
3297-W-75
16
A3-3235-T-1944
1
A1-3260-R-356
24
A-3297-S-97
6
A5-3235-T-1944
1
A-3260-S-357
24
A1-3297-K-115
4
A6-3235-T-1944
1
A1-3260-S-357
24
A-3297-M-117
6
A7-3235-T-1944
1
A-3260-Y-1143
24
A1-3297-N-1288
4
A-3235-U-1945
1
A-3260-D-1148
26
A1-3303-L-12
5
A3-3235-U-1945
2
A-3260-M-1235
25
A-3303-M-13
7
A5-3235-U-1945
2
A-3260-D-1252
27
A-3303-P-1030
5
A6-3235-U-1945
1
A-3260-K-1259
25
3780-R-382
6
A7-3235-U-1945
1
A1-3260-K-1259
25
3892-J-4014
3
A-3235-K-2143
13
A-3260-N-1262
25
3892-S-4023
3
A1-3235-K-2143
13
A-3260-Q-1265
25
3892-B-4708
3
A2-3235-K-2143
12
A1-3260-Q-1265
25
3892-D-4710
3
A3-3235-K-2143
12
A2-3260-S-1267
25
3892-F-4712
7
A4-3235-K-2143
13
3260-F-1280
25
3892-V-4936
5
A5-3235-K-2143
12
3260-R-1292
25
3892-W-4937
6
A7-3235-K-2143
12
A2-3260-R-1292
25
3892-W-4963
4
A-3235-M-2145
13
A-3260-B-1302
25
3892-Y-4965
4
A1-3235-M-2145
13
A1-3260-B-1302
25
3892-M-5213
4
A2-3235-M-2145
13
A-3260-N-1314
24
382A
16
A3-3235-M-2145
13
A-3260-G-1645
24
385A
16
A4-3235-M-2145
13
A2-3260-G-1645
24
493
6
A5-3235-M-2145
13
A-3260-R-1682
25
496
6
A6-3235-M-2145
13
A2-3261-Q-1057
5
572
18
A7-3235-M-2145
13
3261-A-1067
14
580
18
A-3235-U-2335
13
3264-P-172
9
592A
18
A1-3235-U-2335
12
A-3266-L-792
6
598A
18
A2-3235-U-2335
12
A-3266-Y-831
7
742
18
A-3235-W-2337
13
A1-3266-B-834
6
749
18
A1-3235-W-2337
13
3266-M-897
11, 15
772
18
A2-3235-W-2337
13
3266-F-1020
14
782
18
A-3235-Y-2339
13
3266-M-1313
5
6535
18
A1-3235-Y-2339
12
3266-Q-1317
5
6580
18
A2-3235-Y-2339
12
A-3266-P-1446
7
9220
9
3237-W-1167
15
3278-N-300
4
29620
6
55
NUMERICAL PARTS LISTING
PART NUMBER
PAGE
PART NUMBER
PAGE
PART NUMBER
PAGE
29685
6
A-40632-1
10
KIT 1554
32
52387P
1
A-40634-1
10
KIT 1592
32
52618P
1
A-40636-1
10
KIT 1593
33
64450
12
A-40638-1
10
KIT 1594
33
64700
11
B-40312-4
2
KIT 2266
5
78250AC
3
B-40352-4
2
KIT 2268
4
78551
3
B-40354-4
2
KIT 2318
33
9680368
7
B-40356-4
2
KIT 2341
33
16N-4-6271
24
B-40358-4
2
KIT 2342
34
16N-4-6271-1
25
B-40360-4
2
KIT 2363
34
16NYS38-11A
24
B-40362-4
2
KIT 2373
34
16TYS38-11A
25
B-40364-4
2
KIT 2374
34
176N-4-861-1X
25
B-40366-4
2
KIT 2421
34
176N-4-861X
24
B-40368-4
2
KIT 2422
35
176NYS38-13A1
24
B-41002-1
10
KIT 2432
35
176TYS32-3A2
25
B-41004-3
9
KIT 2436
35
176TYS38-13A1
25
B-41006-3
9
KIT 2437
35
17N-4-5961X
24
B-41008-3
10
KIT 2484
35
17N-4-6961-1X
25
B-41010-3
10
KIT 2490
36
17N-4-6961X
24
B-41012-3
10
KIT 2491
36
17N-4-7621-1
25
B-41014-3
9
KIT 2608
36
17N-4-7851X
24
B-41016-3
9
KIT 2630
37
17NYS32-99
24
B-41018-3
9
KIT 2638
9, 37
17NYS32-99A3
24
B-41020-1
10
KIT 2678
5, 38
17NYS32-100A
24
B-41022-1
10
KIT 2679
5, 39
17NYS32-100A2
24
B-41024-4
10
KIT 2699
39
17NYS38-17A2
24
B-41026-3
9
KIT 2731
10, 40
17TYS32-68A2
25
B-41028-3
10
KIT 2731A
10, 40
17TYS32-99
25
B-41030-3
9
KIT 2732
10, 40
17TYS38-70A
25
B-41032-3
10
KIT 2732A
10, 40
17TYS38-53A1
25
B-41034-3
10
KIT 2744
11, 12, 41
18N-4-3221-1X
25
B-41036-3
10
KIT 2791
41
18N-4-3221X
24
B-41592-1
9
KIT 2791A
41
18N-4-3371
24
B-41650-1
10
KIT 2792
42
18N-4-3381-1X
25
B-41806-1
9, 10
KIT 2793
42
18N-4-3581-1X
25
H-715311
9
KIT 2885
42
18N-4-3581X
24
H-715334
9
KIT 2886
42
18NYS32-12A2
24
HM-813810
4
KIT 4435
43
18TYS32-12A2
25
HM-813844
4
KIT 4436
43
5WCS38-12A2
27
JHM-720210
11
KIT 4437
43
5WCS38-24A
27
JHM-720249
12
KIT 4438
44
82NYS32-74
26
JM-515610
3
KIT 4440
44
82NYS32-74A2
26
JM-515649
3
KIT 4441
45
82NYS38-28A
26
JM-822010
11
KIT 4442
45
92NYS38-52A
26
JM-822049
12
KIT 4443
46
92NYS38-52A2
26
KIT 1536
32
KIT 4444
46
56
NUMERICAL PARTS LISTING
PART NUMBER
PAGE
PART NUMBER
PAGE
KIT 4445
1, 46
S-2711-2
16
KIT 4446
1, 46
S-2812-2
4, 5, 7
KIT 4450
47
S-2814-A2
5
KIT 4459
47
S-11440-2
2
KIT 4460
47
S-21016-2
2
KIT 4744
48
SN-1020-1
17
KIT RP180 1625
48
SN-1036-1
17
KIT RP180 1833
48
KIT RP35380
48
KIT RP35380A
49
KIT RP380
49
KIT RP380A
49
KIT RR26185-1752
50
KIT RR26185A-1752
50
KIT RR35380
50
KIT RR35380A
50
KIT RR380
50
KIT RR380A
51
KIT RS23180
51
KIT RS23180A
51
MPS 3355
51
MS-208020-1
11
MS-208045-1
5
MS-210016-1
15
MS-212045-1
9
MWA-506
11, 15
MWA-508
11
MWA-512
9
MWA-516
15
N-68-1
4
N-110-1
2, 18
NL-26-1
4
NL-210-1
6
P-16
6
P-28S
17
P-112
2
P-212
17
R945008
7
S-256A-2
1
S-256P-2
5
S-2510-2
6
S-2518-2
7
S-2610-2
5, 7
S-2616-2
5, 7
S-2626-2
4
S-2710-2
16
57
NOTES
58
MAINTENANCE INFORMATION
Maintenance Manual No. 5E for
carriers of forward tandem axles.
Maintenance Manual No. 5 for carriers of
180, 185 or 186 Series single axles and
180, 185 or 186 Series rear tandem axles.
Maintenance Manula No. 6C for carriers of 380 Series single axles
and 380 Series rear tandem axles.
59
NOTES
60
NOTES
61
ARVINMERITOR AFTERMARKET PARTS WARRANTY
We warrant all new parts for one year from date of shipment to the buyer against defective material or
workmanship (but not against damage caused by accident, abuse or improper installation, maintenance
or repair) when such parts are used on vehicles the specifications of which have been approved by our
Engineering Department.
As the exclusive remedy under this warranty, we will, at our option, repair or replace such parts free of
charge, or take back the nonconforming parts and refund the monies paid by buyer for such parts, if
found on examination by us to be nonconforming and if any necessary return charges are prepaid.
If it is necessary to return any parts under this warranty, buyer agrees not to make any deduction on
account thereof from remittances on current accounts while claims are in the process of disposition.
Any expense incurred without our consent for repairs or replacement will not be allowed.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS,
EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. IN NO EVENT SHALL SELLER
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE.
Only genuine ArvinMeritor replacement parts are covered by this aftermarket parts warranty.
62
Distributed by:
Information contained in this publication was in effect at
the time the publication was approved for printing and is
subject to change without notice or liability. ArvinMeritor
reserves the right to revise the information presented or
discontinue the production of parts at any time.
Meritor Heavy Vehicle Systems, LLC
7975 Dixie Highway
Florence, Kentucky 41042 USA
888-725-9355
www.arvinmeritor.com
XpresswayPlus.arvinmeritor.com
Litho in USA
Revised 10/08
PB-9108 (13028/05060)
©2008 ArvinMeritor, Inc.
PB-9108
Revised 10/08
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : Acrobat Distiller 6.0.1 (Windows) Modify Date : 2008:10:28 10:28:49-04:00 Create Date : 2008:09:25 14:16:26-04:00 Metadata Date : 2008:10:28 10:28:49-04:00 Document ID : uuid:57a386d4-7932-452e-838c-3f83df429f65 Instance ID : uuid:0e4c4316-f62c-4357-b07b-a74108d326c4 Format : application/pdf Title : untitled Page Mode : UseThumbs Page Count : 73EXIF Metadata provided by EXIF.tools