M3PCHT Alesis Midi Verb3 Program Chart Midiverb3 Programchart
Alesis MidiVerb3 Program Chart midiverb3_programchart Alesis - MidiVerb3 - Program Chart
User Manual: Alesis MidiVerb3 Program Chart Alesis - MidiVerb3 - Program Chart
Open the PDF directly: View PDF 
.
Page Count: 2
REVERBS
000 Chorus-Reverb-Delay-EQ
001 Small Bright Room 1
002 Small Bright Room 2
003 Small Warm Room
004 Small Warm Chamber
005 Small Dark Plate
006 Small Dark Room
007 Small Diffused Room
008 Small Dark Chamber
009 Small Warm Plate
010 Medium Warm Hall 1
011 Medium Warm Hall 2
012 Medium Warm Room
013 Medium Warm Plate
014 Medium Bright Room
015 Medium Dark Chamber
016 Medium Dark Room Chorus
017 Medium Dark Room
018 Medium Warm Room
019 Medium Warm Plate
020 Large Warm Room 1
021 Large Dark Plate 1
022 Large Warm Plate 1
023 Large Dark Plate 2
024 Large Warm Room 2
025 Large Dark Hall 1
026 Large Dark Chamber
027 Large Dark Hall 2
028 Large Warm Plate 2
029 Ex Large Warm Plate
GATED AND REVERSE REVERBS
030 Bright Gate
031 Medium Bright Gate
032 Fast Warm Gate
033 Long Warm Gate W/Chorus
034 Long Dark Gate Chorus
035 Reverse Chorus
036 Reverse Regen Chorus 1
037 Reverse Regen Flange
038 Long Reverse Chorus
039 Reverse Regen Chorus 2
CHORUSES AND FLANGES
040 Slow Mono Flange
041 Deep Slow Mono Flange
042 Stereo Flange
043 Slow Deep Stereo Flange
044 Fast Stereo Flange
045 Slow Mono Chorus
046 Fast Mono Chorus
047 Stereo Chorus
048 Deep Slow Stereo Chorus
049 Ultra Chorus
DELAYS
050 30ms Delay
051 100ms Delay Regen
052 300ms Delay
053 490ms Delay
054 490ms Delay Regen
055 Chorus Slap Delay
056 Chorus W/Regen Delay
057 Deep Stereo Chrs W/Rgn Dly
058 Lennon Piano Delay
059 Stereo Flange W/Regen Delay
EFFECTS
060 Deep St Flange W/Regen Dly
061 Chorused Reverb
062 Reverse Reverb Flange
063 Reverb Flange
064 Chorus Plate
065 Flanged Repeats
066 Chorus Dark Reverb
067 Chorus W/Regen Delay
068 Reverb Mono Flange
069 Stereo Chorus W/Reverb
MIDI CONTROLLED
070 Modwheel Reverb W/Flange
071 Velocity Reverb W/Chorus
072 Negative Velocity Delay
073 Positive Velocity Delay
074 Aftrtch Chrs Speed W/Reverb
075 Positive Velocity Reverb
076 Negative Velocity Reverb
077 Sustain Pdl Reverb W/St Chrs
078 Sus Pdl Dly Level W/St Chrs
079 Sus Pdl Dly Regen W/St Chrs
SPECIAL EFFECTS
080 Flanged Echo Sax
081 R&B Room Sax
082 Rock&Roll Sax
083 Fanfare
084 Rocky Trumpet
085 Flanger Reverse Echoes
086 Flange Reverse
087 Chorused Hall
088 Chorused Room
089 Chorused Delay Regen
090 Metallic Flanged Reverb
091 Quick Return
092 Darker Tail
093 Short Chorused Reverb
094 Lots Of Chorused Repeats
095 Slap Reverb
096 Dark Chorused Echoes
097 Nice Chorused Reverb
098 Short Chamber Chorus
099 Bright Chorus Reverb
ALESIS MIDIVERB III PROGRAM CHART
®
EDIT COMPARE
For convenience, MIDIVERB III has a powerful feature that
allows you to compare your edits to the currently stored
program before committing them to memory.
1) Exit the Edit mode by pressing the PROGRAM button.
The PROGRAM LED will light. The Numeric Display
will show the program number you are editing and the
Edit Indicator Dot will light.
2) To hear the unedited program, press the PROGRAM
button a second time. The Edit Indicator Dot will flash,
indicating that you are hearing the unedited program.
You may switch back and forth between the edited and
unedited versions of the program until you reach a
decision; or you can re-enter EDIT mode to further
modify your program. When you are satisfied with your
edits, follow the directions for SAVING PROGRAMS.
SAVING PROGRAMS
1) Press the STORE button. The STORE button LED will
flash. The 3 Digit Numeric Display will indicate the
program number you are storing to (see NOTE).
2) Press the STORE button again to save the edited
program.
3) After saving, MIDIVERB III will return to EDIT mode
(EDIT button LED will light). The 3 Digit Numeric
Display will show the newly stored parameter. You
may now continue editing or return to PROGRAM
mode by pressing the PROGRAM button.
NOTE: Program numbers 000-099 are non-erasable
factory programs. All edits performed on these programs
can only be stored in program locations 100-199. Edits to
program numbers 000-999 will automatically appear as
the chosen program location plus 100. For example,
editing program 29 will appear as storable location 129.
However, you may choose numbered storable locations
from 100-199 as follows:
1) Press the Up or Down value button to select the
desired program location.
2) Press the STORE button to save the program.
SELECTING PROGRAMS
1) Press the PROGRAM button. The Program button LED
will light.
2) Press the Up or Down VALUE button until the desired
program is displayed in the 3 digit numeric display. OR:
3) Select a 3 digit program number from the numbered
Function Buttons. Each digit must be selected within 4
seconds or the initial program will be restored.
EDITING PROGRAMS
1) Press the EDIT button. Press one of the Function
Buttons: its LED will light. The currently stored
parameter value will be displayed in the
3 Digit Numeric Display.
2) The Reverb, Delay, Chorus, EQ and Mix buttons each
have two parameter choices. Press the EDIT button to
toggle between the two choices. The Upper or Lower
Function LEDs will light to indicate your choice.
3) Press the Up or Down VALUE button to adjust the
parameter.
The programs in MIDIVERB III have been carefully chosen for
their musical usefulness by a group of experts well versed in the
art of signal processing. If, however, you wish to alter these
programs to better suit your needs, MIDIVERB III has a very
simple and logical routine for performing edits. Please follow
these easy instructions...
PRINTED IN USA A 027
