Mirror Inst 1 Secret Door Installation Instr

User Manual:

Open the PDF directly: View PDF PDF.
Page Count: 5

DownloadMirror Inst 1 Mirror-secret-door-installation-instr
Open PDF In BrowserView PDF
CREATIVE

HOME

ENGINEERING

Mirror Secret Door
Installation Instructions

1. Prepare the wall opening
CREATIVE

HOME

Installation of the mirror door requires a wall
opening with the below noted dimensions.
Opening dimensions may vary up to 1/8”.

Floor

4 1/2”

74”

No less than 2 3/4” above molding (if present)

32”

Front View

2. Choose hinge side.
Locate the white sticker on the mirror face frame.
This sticker indicates the non-hinged side of the
door. The door may be rotated 180 degrees to
switch the hinge side location. Do not remove the
sticker at this point.

Right Side Hinge

Left Side Hinge

No less than 4.0” above finished floor

Baseboard

No less than 2 3/4”

Wall

ENGINEERING

Side View

3. Fit frame into prepared opening.
Rest the bottom edge of the door frame on the
bottom ledge of the opening. Rock the top of
the door into the opening.

CREATIVE

HOME

ENGINEERING

2

1

4. Shim Door Frame
Depending on the conditions of the prepared opening it may be necessary to shim the frame to
achieve perfect operation. Use a level on the bottom
and side of the door frame and check for plumb and
level. Shim accordingly.

Ensure this surface is vertical

Ensure this surface is level

5. Secure frame to opening with wood screws.
Using six 2.5” wood screws secure the frame
of the mirror door to the studs. These screws
may be puttied over or painted as desired.

2.5” Wood Screw

6. Function Check
Your door should now be ready to use. Run the
included magnet over the white sticker. While
holding the magnet over the sticker lightly push on
the mirror. Your door should now open. If the door is
rubbing on the frame check again for frame plumbness and level. The sticker may now be removed.

CREATIVE

HOME

ENGINEERING

6. Battery Replacement.
The 8 x AA batteries that are preinstalled will
last for many thousands of cycles. If the batteries die they may be easily replaced.
1. Locate battery cover location. This will either
be the upper left or lower right corner depending on your installation orientation and is
located on the perimeter edge of the frame.

2. Remove the two wood screws securing the
cover using a #2 phillips driver. Pull the wooden
cover from the frame

3. Pull battery tray from frame cavity. Remove
old batteries and reinstall fresh AA batteries.

CREATIVE

HOME

ENGINEERING
Source Exif Data: 
File Type                       : AI
File Type Extension             : ai
MIME Type                       : application/vnd.adobe.illustrator
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2011:02:28 15:59:40-06:00
Create Date                     : 2011:02:03 12:09:07-07:00
Metadata Date                   : 2011:02:28 15:59:40-06:00
Creator Tool                    : Adobe Illustrator CS3
Format                          : application/pdf
Title                           : Mirror Inst 1
Document ID                     : uuid:a13695a0-6fd6-024a-a399-ca736e67e4d8
Instance ID                     : uuid:6987a17f-c9a5-4202-a035-2d12f3ed6f8c
Producer                        : Adobe PDF library 8.00
Page Count                      : 5
Creator                         : Adobe Illustrator(R) 13.0
For                             : Travis Humble,
Bounding Box                    : 236 -9 689 693
Container Version               : 11
Creator Version                 : 13
AI Creator Version              : 13.0.2
AI Build Number                 : 434
AI Color Usage                  : Color
AI Ruler Units                  : Inches
AI Color Model                  : RGB
AI Target Resolution            : 800
AI Num Layers                   : 1
EXIF Metadata provided by EXIF.tools

Navigation menu