Mitutoyo 570 Series Absolute Digimatic Height Gauge Catalogue
User Manual: mitutoyo-570-series-absolute-digimatic-height-gauge-catalogue
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570 Bulletin No. 2218 Excellent Functionality and Cost Performance Features Slider Feed Wheel • Smooth up/down displacement with the slider feed wheel identical to that of doublecolumn height gages. Column • Durable and high-measuring accuracy. • Increased rigidity: 1.38 x 0.59”(35 x 15mm) common to all models. • Instrumental error of 12”/300mm model: ±.0015”/±0.03mm, an improvement compared to earlier models. 0.59”(15) Dimensions of column cross section (unit: mm/inch) 1.38”(35) New models 0.47”(12) 1.38”(35) Conventional model 600mm / 23.62” 1.1”(28) Conventional model 300mm / 11.81” 0.35”(9) Large Clamp Lever • Lever provides reliable slider clamp operation. Large LCD • Character size: 0.39” x 0.15”(10 x 3.8mm), is easy to read. • Readable in dark environments. Actual Size Base • New base design makes it easy to move and hold. 570-304 Built-in ABS (Absolute) Encoder • Eliminates the need to set the reference point every time the unit is turned on. • Eliminates over-speed errors. 570-302 2 Functions • ORIGIN (Absolute Origin) Setting Function The surface plate top, etc., can be stored as the absolute origin. Dimensions .59” (15) 1.38” (35) 0.47” (12) • INC (Incremental) Measurement Function This function allows the origin setup at an arbitrary position in addition to the ABS (Absolute) Measurement Function. Turning the power off clears the new origin from memory and reverts the gage back to its original absolute origin. • Low Battery Alarm Notification of low battery life. “ 0.39” (10) L 4.46” (113.2) 2.76” (70.2) • Hold Function A display value can be held. 0.35” (9) 3.15” (80) B C 2.32” (59) • Output Function The output terminals of measured data allow you to establish a statistical process control system or a measurement support system. Unit: inch (mm) 1.26” (32) • ABS (Absolute) Measurement Function After power-on, measurement can begin without zero-setting as required by previous models. Also, the absolute origin position can be changed with the ORIGIN (Absolute Origin) switch. A ” Specifications Order No. 570-302 570-304 570-312 570-313 570-314 Measuring range (mm/inch) 0 - 300mm 0 - 600mm 12”/300mm 18”/450mm 24”/600mm Resolution (mm/inch) 0.01mm .0005”/0.01mm Instrumental error*1 ±0.03mm ±0.05mm ±.0015”/ ±.0020”/±0.05mm ±0.03mm Repeatability (mm/inch) 0.01mm .0005”/0.01mm Display 6-digit LCD, character height of 10mm Response speed Unlimited Power supply SR44 (button-type silver oxide battery) 1pc: 938882 Battery life 20,000 hours Functions ORIGIN (absolute origin) setting function, ABS (absolute) measurement function, INC (incremental) measurement function, Hold function, Output function*2, and Low-battery alarm Mass lbs (kg) 10.14 (4.6) 14.11 (6.4) 10.14 (4.6) 13 (5.9) 14.11 (6.4) Slider feed Wheel rotation Standard accessories Scriber: 07GZA000 Scriber: 900258 Scriber clamp: 05GZA033 Scriber clamp: 901385 Optional accessories Holder armC: 953638 (for mm), 953639 (for inch) Clamp with dovetail groove: 902053/Connecting cable: 905338 (1m), 905409 (2m) L 20.0” (507mm) 32.0” (812mm) 20.0” (507mm) 26.1” (662mm) 32.0” (812mm)” A 6.3” (160mm) 7.13” (181mm) 6.3” (160mm) 7.13” (181mm) B 4.8” (122mm) 5.6” (142mm) 4.8” (122mm) 5.6” (142mm) C 2.86” (72.6mm) 2.92” (74.1mm) 2.86” (72.6mm) 2.92” (74.1mm) *1: Quantizing error: ±1 count is not included. *2: Data output cable (option): 1m (905338) or 2m (905409) 3 Optional Accessories • Holder arm C allows a test indicator to be attached to this gage and the clamp (with a dovetail groove) (Refer to specifications). Output Function Provided • Measured data can be output to the small printer Digimatic Mini Processor DP-1VR (optional) or to a personal computer via the input tool (optional). SPC cable 1m: No.905338 2m: No.905409 Clamp (with a dovetail groove) DP-1VR 264-504-5A Scriber clamp Input Tool 264-016 Coordinate Measuring Machines Vision Measuring Systems Form Measurement Optical Measuring Whatever your challenges are, Mitutoyo supports you from start to finish. Sensor Systems Test Equipment and Seismometers Digital Scale and DRO Systems Small Tool Instruments and Data Management Find additional product literature and our product catalog www.mitutoyo.com Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We therefore reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our General Trading Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive. Specifications are subject to change without notice. Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of our products may require prior approval by an appropriate governing authority. Trademarks and Registrations Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo America Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate companies should be contacted for more complete trademark and registration information. Mitutoyo is not only a manufacturer of top-quality measuring products but one that also offers qualified support for the lifetime of the equipment, backed by comprehensive services that ensure your staff can make the very best use of the investment. Apart from the basics of calibration and repair, Mitutoyo offers product and metrology training, as well as IT support for the sophisticated software used in modern measuring technology. We can also design, build, test and deliver measuring solutions and even, if deemed cost-effective, take your critical measurement challenges in-house on a sub-contract basis. Mitutoyo America Corporation www.mitutoyo.com One Number to Serve You Better 1-888-MITUTOYO (1-888-648-8869) 3 M Solution Centers: Aurora, Illinois (Headquarters) Boston, Massachusetts Huntersville, North Carolina Mason, Ohio Plymouth, Michigan City of Industry, California Birmingham, Alabama Renton, Washington Houston, Texas 1.5M 0316-02 • Printed in USA • March 2016 © 2016 Mitutoyo America Corporation Holder arm C
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42 Create Date : 2016:03:18 16:01:23-05:00 Metadata Date : 2016:03:18 16:01:25-05:00 Modify Date : 2016:03:18 16:01:25-05:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Instance ID : uuid:d63522f5-2eaa-f640-9e51-312be5578191 Original Document ID : adobe:docid:indd:f1f4cdab-ad03-11d9-b2c6-dc9c31ef457e Document ID : xmp.id:e731e52e-41ee-4053-ba1a-17edd0f63989 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:9bf480a5-6c7c-4e79-bce3-50dc64cad9db Derived From Document ID : adobe:docid:indd:f1f4cdab-ad03-11d9-b2c6-dc9c31ef457e Derived From Original Document ID: adobe:docid:indd:f1f4cdab-ad03-11d9-b2c6-dc9c31ef457e Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:03:18 16:01:23-05:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 4 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools