Mitutoyo 570 Series Absolute Digimatic Height Gauge Catalogue

User Manual: mitutoyo-570-series-absolute-digimatic-height-gauge-catalogue

Open the PDF directly: View PDF .
Page Count: 4

ABSOLUTE DIGIMATIC HEIGHT GAGE

SERIES 570

Bulletin No. 2218

SMALL TOOL INSTRUMENTS

AND DATA MANAGEMENT

2

Excellent Functionality and Cost Performance

Features

Slider Feed Wheel

• Smooth up/down displacement with the

slider feed wheel identical to that of double-

column height gages.

Column

• Durable and high-measuring accuracy.

• Increased rigidity: 1.38 x 0.59”(35 x 15mm)

common to all models.

• Instrumental error of 12”/300mm model:

±.0015”/±0.03mm, an improvement compared to

earlier models.

Large Clamp Lever

• Lever provides reliable slider clamp operation.

Large LCD

• Character size: 0.39” x 0.15”(10 x 3.8mm),

is easy to read.

• Readable in dark environments.

Base

• New base design makes it easy to move

and hold.

Built-in ABS (Absolute) Encoder

• Eliminates the need to set the reference

point every time the unit is turned on.

• Eliminates over-speed errors.

Dimensions

of column cr

oss section (unit: mm/inch)

New model

s

1.38”(35)

1.38”(35)

0.59”(15)

Conventional model

600mm / 23.62”

Conventional model

300mm / 11.81”

0.47”(12)

1.1”(28)

0.35”(9)

Actual Size

570-302

570-304

3

Functions

• ORIGIN (Absolute Origin) Setting Function

The surface plate top, etc., can be stored as the

absolute origin.

• ABS (Absolute) Measurement Function

After power-on, measurement can begin without

zero-setting as required by previous models. Also, the

absolute origin position can be changed with the

ORIGIN (Absolute Origin) switch.

• INC (Incremental) Measurement Function

This function allows the origin setup at an arbitrary

position in addition to the ABS (Absolute) Measurement

Function. Turning the power off clears the new origin

from memory and reverts the gage back to its original

absolute origin.

• Hold Function

A display value can be held.

• Output Function

The output terminals of measured data allow you to

establish a statistical process control system or a mea-

surement support system.

• Low Battery Alarm

Notification of low battery life. “ ”

3.15” (80)

2.76” (70.2)

4.46” (113.2)

0.47” (12)

0.39” (10)

1.26” (32)

L

0.35” (9)

B

C

A

1.38” (35)

Unit: inch (mm)

.59” (15)

2.32” (59)

Specifications

Order No. 570-302 570-304 570-312 570-313 570-314

Measuring range (mm/inch) 0 - 300mm 0 - 600mm 12”/300mm 18”/450mm 24”/600mm

Resolution (mm/inch) 0.01mm .0005”/0.01mm

Instrumental error*1 ±0.03mm ±0.05mm ±.0015”/ ±.0020”/±0.05mm

±0.03mm

Repeatability (mm/inch) 0.01mm .0005”/0.01mm

Display 6-digit LCD, character height of 10mm

Response speed Unlimited

Power supply SR44 (button-type silver oxide battery) 1pc: 938882

Battery life 20,000 hours

Functions ORIGIN (absolute origin) setting function, ABS (absolute) measurement function,

INC (incremental) measurement function, Hold function, Output function*2,

and Low-battery alarm

Mass lbs (kg) 10.14 (4.6) 14.11 (6.4) 10.14 (4.6) 13 (5.9) 14.11 (6.4)

Slider feed Wheel rotation

Standard accessories Scriber: 07GZA000 Scriber: 900258

Scriber clamp: 05GZA033 Scriber clamp: 901385

Optional accessories Holder armC: 953638 (for mm), 953639 (for inch)

Clamp with dovetail groove: 902053/Connecting cable: 905338 (1m), 905409 (2m)

L 20.0” (507mm) 32.0” (812mm) 20.0” (507mm) 26.1” (662mm) 32.0” (812mm)”

A 6.3” (160mm) 7.13” (181mm) 6.3” (160mm) 7.13” (181mm)

B 4.8” (122mm) 5.6” (142mm) 4.8” (122mm) 5.6” (142mm)

C 2.86” (72.6mm) 2.92” (74.1mm) 2.86” (72.6mm) 2.92” (74.1mm)

*1: Quantizing error: ±1 count is not included. *2: Data output cable (option): 1m (905338) or 2m (905409)

Dimensions

Whatever your challenges are,

Mitutoyo supports you from start to finish.

Mitutoyo is not only a manufacturer of top-quality

measuring products but one that also offers qualified

support for the lifetime of the equipment, backed by

comprehensive services that ensure your staff can make

the very best use of the investment.

Apart from the basics of calibration and repair, Mitutoyo

offers product and metrology training, as well as IT

support for the sophisticated software used in modern

measuring technology. We can also design, build, test

and deliver measuring solutions and even, if deemed

cost-effective, take your critical measurement challenges

in-house on a sub-contract basis.

Coordinate Measuring Machines

Sensor Systems

Vision Measuring Systems

Test Equipment

and Seismometers

Form Measurement

Digital Scale and DRO Systems

Optical Measuring

Small Tool Instruments

and Data Management

Mitutoyo America Corporation

www.mitutoyo.com

One Number to Serve You Better

1-888-MITUTOYO (1-888-648-8869)

M3 Solution Centers:

Aurora, Illinois (Headquarters)

Boston, Massachusetts

Huntersville, North Carolina

Mason, Ohio

Plymouth, Michigan

City of Industry, California

Birmingham, Alabama

Renton, Washington

Houston, Texas

1.5M 0316-02 • Printed in USA • March 2016

© 2016 Mitutoyo America Corporation

Find additional product literature

and our product catalog

www.mitutoyo.com

Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance

data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We

therefore reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations,

descriptions and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our

General Trading Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive. Specifications

are subject to change without notice.

Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of our products may

require prior approval by an appropriate governing authority.

Trademarks and Registrations

Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo

America Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate

companies should be contacted for more complete trademark and registration information.

Clamp (with a dovetail groove)

Holder arm C

Scriber clamp

Optional Accessories

• Holder arm C allows a test indicator to be attached

to this gage and the clamp (with a dovetail groove)

(Refer to specifications).

DP-1VR

264-504-5A

SPC cable

1m: No.905338

2m: No.905409

Input Tool

264-016

Output Function Provided

• Measured data can be output to the small printer

Digimatic Mini Processor DP-1VR (optional) or to a

personal computer via the input tool (optional).