OmniSwitch AOS Release 8 Transceivers Guide

User Manual:

Open the PDF directly: View PDF PDF.
Page Count: 52

DownloadOmniSwitch AOS Release 8 Transceivers Guide Omniswitch-8-transceivers-guide
Open PDF In BrowserView PDF
Part No. 060416-10 Rev. A
September 2016

OmniSwitch AOS Release 8
Transceivers Guide

enterprise.alcatel-lucent.com

This user guide contains transceiver specifications and compatibility information for the
OmniSwitch AOS Release 8 and supported platforms. The information described in this guide is
subject to change without notice.

Attention: Use of any transceivers other than those part numbers listed in the Compatibility Matrices is prohibited. Failure to comply with these matrices is not guaranteed for proper performance
and may result in voiding the warranty for the affected platforms.
enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of
Alcatel-Lucent. To view other trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the property of their respective owners. The
information presented is subject to change without notice. Neither ALE Holding nor any of its affiliates
assumes any responsibility for inaccuracies contained herein. (2016)

Service & Support Contact Information
North America: 800-995-2696
Latin America: 877-919-9526
EMEA: +800 00200100 (Toll Free) or +1(650)385-2193
Asia Pacific: +65 6240 8484
Web: support.esd.alcatel-lucent.com
Email: ebg_global_supportcenter@al-enterprise.com

Contents
About This Guide ........................................................................................................... v

Supported Platforms ........................................................................................................... v
Who Should Read this Manual? ........................................................................................ vi
When Should I Read this Manual? .................................................................................... vi
What is Not in this Manual? .............................................................................................. vi
How is the Information Organized? .................................................................................. vi
Documentation Roadmap ................................................................................................. vii
Related Documentation ..................................................................................................... ix
Technical Support .............................................................................................................. x
Chapter 1

Small Form-Factor Pluggables (SFP/SFP+/QSFP+) .......................................... 1-1

In This Chapter ................................................................................................................1-1
SFP MSA Specification ..................................................................................................1-2
Transceiver Installation and Removal .............................................................................1-3
40-Gigabit Fiber Optic Cables ........................................................................................1-6
QSFP to QSFP 40G Fiber Optic Cable ....................................................................1-6
QSFP to SFP+ Splitter Fiber Optic Cable ................................................................1-6
Gigabit Ethernet Transceivers .........................................................................................1-7
Dual Speed Ethernet Transceivers ................................................................................1-13
100 FX Ethernet Transceivers .......................................................................................1-15
10-Gigabit SFP+ Transceivers ......................................................................................1-19
40-Gigabit QSFP+ Transceivers ...................................................................................1-23
Fibre Channel Transceivers ...........................................................................................1-27
Industrial Transceivers ..................................................................................................1-28
Chapter 2

Transceiver Compatibility Matrix ......................................................................... 1-33

In This Chapter ..............................................................................................................1-33
OmniSwitch 10K Compatibility ...................................................................................1-34
OmniSwitch 6900 Compatibility ..................................................................................1-36
OmniSwitch 6860 Compatibility ..................................................................................1-38
OmniSwitch 6865 Compatibility ..................................................................................1-40
OmniSwitch 9900 Compatibility ..................................................................................1-41

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

iii

Contents

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

iv

About This Guide

This OmniSwitch AOS Release 8 Transceivers Guide provides specifications and compatibility information for the supported OmniSwitch transceivers for all OmniSwitch AOS Release 8 products.

Supported Platforms
This information in this guide applies to the following products:
• OmniSwitch 10K
• OmniSwitch 6900
• OmniSwitch 6860(E)
• OmniSwitch 6865
• OmniSwitch 9900

Unsupported Platforms
The information in this guide does not apply to the following products:
• All other platforms

OmniSwitch AOS Release 8 Tranceivers Guide

September 2016

page v

About This Guide

Who Should Read this Manual?

Who Should Read this Manual?
The audience for this user guide is network administrators and IT support personnel who need to provide
network connectivity using SFP, SFP+, and QSFP+ transceivers.

When Should I Read this Manual?
Read this guide as soon as you are ready to integrate your OmniSwitch into your network and you are
ready to provide connectivity using the supported transceivers. You should have already stepped through
the first login procedures and read the brief software overviews in the appropriate OmniSwitch Hardware
Guide.
This guide includes information about the supported OmniSwitch transceivers.
• SFP/SFP+/QSFP+ specifications
• SFP/SFP+/QSFP+ compatibility information

What is Not in this Manual?
Procedures for switch management methods, such as CLI, web-based (WebView or OmniVista) or SNMP,
are outside the scope of this guide.
For information on WebView and SNMP switch management methods consult the OmniSwitch Switch
Management Guide. Information on using WebView and OmniVista can be found in the context-sensitive
on-line help available with those network management applications.
This guide is designed to provide transceiver specification and compatibility information only and is not
intended as a reference for any CLI commands or configuration information. Refer to the Documentation
Roadmap for a list of available user guides.

How is the Information Organized?
Chapters in this guide are broken down by transceiver type.
Specification Information. Each transceiver has an associated table providing individual specifications
for all supported transceivers.
Compatibility Information. A compatibility chart is provided for each transceiver specifying which
modules or switch the transceiver is supported on.

OmniSwitch AOS Release 8 Tranceivers Guide

September 2016

page vi

About This Guide

Documentation Roadmap

Documentation Roadmap
The OmniSwitch user documentation suite was designed to supply you with information at several critical
junctures of the configuration process.The following section outlines a roadmap of the manuals that will
help you at each stage of the configuration process. Under each stage, we point you to the manual or
manuals that will be most helpful to you.

Stage 1: Using the Switch for the First Time
Pertinent Documentation: OmniSwitch Hardware Users Guide
Release Notes
This guide provides all the information you need to get your switch up and running the first time. It
provides information on unpacking the switch, rack mounting the switch, installing NI modules, unlocking
access control, setting the switch’s IP address, and setting up a password. It also includes succinct
overview information on fundamental aspects of the switch, such as hardware LEDs, the software
directory structure, CLI conventions, and web-based management.
At this time you should also familiarize yourself with the Release Notes that accompanied your switch.
This document includes important information on feature limitations that are not included in other user
guides.

Stage 2: Gaining Familiarity with Basic Switch Functions
Pertinent Documentation: OmniSwitch Hardware Users Guide
OmniSwitch AOS Release 8 Switch Management Guide
Once you have your switch up and running, you will want to begin investigating basic aspects of its
hardware and software. Information about switch hardware is provided in the OmniSwitch 10K Hardware
Guide. This guide provide specifications, illustrations, and descriptions of all hardware components, such
as chassis, power supplies, Chassis Management Modules (CMMs), Network Interface (NI) modules, and
cooling fans. It also includes steps for common procedures, such as removing and installing switch
components.
This guide is the primary users guide for the basic software features on a single switch. This guide
contains information on the switch directory structure, basic file and directory utilities, switch access
security, SNMP, and web-based management. It is recommended that you read this guide before
connecting your switch to the network.

Stage 3: Integrating the Switch Into a Network
Pertinent Documentation: OmniSwitch AOS Release 8 Network Configuration Guide
OmniSwitch AOS Release 8 Advanced Routing Configuration Guide
OmniSwitch AOS Release 8 Data Center Switching Guide
When you are ready to connect your switch to the network, you will need to learn how the OmniSwitch
implements fundamental software features, such as 802.1Q, VLANs, Spanning Tree, and network routing
protocols. The Network Configuration Guide contains overview information, procedures, and examples on
how standard networking technologies are configured on the OmniSwitch.
The Advanced Routing Guide includes configuration information for networks using advanced routing
technologies (OSPF and BGP) and multicast routing protocols (DVMRP and PIM-SM).
The Data Center Switching Guide includes configuration information for data center networks using
virtualization technologies (SPBM and UNP) and Data Center Bridging protocols (PFC, ETC, and
DCBX).

OmniSwitch AOS Release 8 Tranceivers Guide

September 2016

page vii

About This Guide

Documentation Roadmap

Anytime
The OmniSwitch AOS Release 8 CLI Reference Guide contains comprehensive information on all CLI
commands supported by the switch. This guide includes syntax, default, usage, example, related CLI
command, and CLI-to-MIB variable mapping information for all CLI commands supported by the switch.
This guide can be consulted anytime during the configuration process to find detailed and specific
information on each CLI command.

OmniSwitch AOS Release 8 Tranceivers Guide

September 2016

page viii

About This Guide

Related Documentation

Related Documentation
The following are the titles and descriptions of all the OmniSwitch user manuals:
• OmniSwitch 10K/9900/6900/6860/6865 Hardware Users Guides

Describes the hardware and software procedures for getting an OmniSwitch up and running as well as
complete technical specifications and procedures for all OmniSwitch chassis, power supplies, fans, and
Network Interface (NI) modules.
• OmniSwitch AOS Release 8 CLI Reference Guide

Complete reference to all CLI commands supported on the OmniSwitch. Includes syntax definitions,
default values, examples, usage guidelines and CLI-to-MIB variable mappings.
• OmniSwitch AOS Release 8 Switch Management Guide

Includes procedures for readying an individual switch for integration into a network. Topics include
the software directory architecture, image rollback protections, authenticated switch access, managing
switch files, system configuration, using SNMP, and using web management software (WebView).
• OmniSwitch AOS Release 8 Network Configuration Guide

Includes network configuration procedures and descriptive information on all the major software
features and protocols included in the base software package. Chapters cover Layer 2 information
(Ethernet and VLAN configuration), Layer 3 information (routing protocols, such as RIP and IPX),
security options (authenticated VLANs), Quality of Service (QoS), link aggregation, and server load
balancing.
• OmniSwitch AOS Release 8 Advanced Routing Configuration Guide

Includes network configuration procedures and descriptive information on all the software features and
protocols included in the advanced routing software package. Chapters cover multicast routing
(DVMRP and PIM-SM), Open Shortest Path First (OSPF), and Border Gateway Protocol (BGP).
• OmniSwitch AOS Release 8 Data Center Switching Guide

Includes and introduction to the OmniSwitch data center switching architecture as well as network
configuration procedures and descriptive information on all the software features and protocols that
support this architecture. Chapters cover Shortest Path Bridging MAC (SPBM), Data Center Bridging
(DCB) protocols, Virtual Network Profile (vNP), and the Edge Virtual Bridging (EVB) protocol.
• OmniSwitch AOS Release 8 Transceivers Guide

Includes transceiver specifications and product compatibility information.
• Technical Tips, Field Notices

Includes information published by Alcatel’s Customer Support group.
• Release Notes

Includes critical Open Problem Reports, feature exceptions, and other important information on the
features supported in the current release and any limitations to their support.

OmniSwitch AOS Release 8 Tranceivers Guide

September 2016

page ix

About This Guide

Technical Support

Technical Support
An Alcatel-Lucent service agreement brings your company the assurance of 7x24 no-excuses technical
support. You’ll also receive regular software updates to maintain and maximize your Alcatel-Lucent
product’s features and functionality and on-site hardware replacement through our global network of
highly qualified service delivery partners.
With 24-hour access to Alcatel-Lucent Enterprise Service and Support web page, you’ll be able to view
and update any case (open or closed) that you have reported to Alcatel-Lucent Enterprise technical
support, open a new case or access helpful release notes, technical bulletins, and manuals.
Access additional information on Alcatel-Lucent Enterprise Programs:
Web: support.esd.alcatel-lucent.com
Phone: 1-800-995-2696
Email: ebg_global_supportcenter@al-enterprise.com

OmniSwitch AOS Release 8 Tranceivers Guide

September 2016

page x

1 Small Form-Factor
Pluggables (SFP/SFP+/QSFP+)
OmniSwitch Series switches use both copper-based and fiber-based optical Small Form Factor Pluggable
transceivers. These transceivers are fully hot-swappable and are available for both short-reach and longreach applications. Copper-based and fiber-based optical transceivers can be mixed on the same module.

In This Chapter
This chapter describes the technical specifications for all the OmniSwitch supported transceivers. For
additional details about OmniSwitch modules, see the appropriate OmniSwitch Hardware Guide.
Transceiver specifications in this chapter include:
• SFP MSA Specifications. See “SFP MSA Specification” on page 1-2.
• Transceiver Installation. See “Transceiver Installation and Removal” on page 1-3.
• 40-Gigabit Fiber Optic Cable Overview. See “40-Gigabit Fiber Optic Cables” on page 1-6.
• Gigabit Ethernet Transceivers. See “Gigabit Ethernet Transceivers” on page 1-7.
• Dual Speed Ethernet Transceivers. See “Dual Speed Ethernet Transceivers” on page 1-13.
• 100-FX Ethernet Transceivers. See “100 FX Ethernet Transceivers” on page 1-15.
• 10-Gigabit SFP+ Transceivers. See “10-Gigabit SFP+ Transceivers” on page 1-19.
• 40-Gigabit QSFP+ Transceivers. See “40-Gigabit QSFP+ Transceivers” on page 1-23.
• 40-Gigabit QSFP+ Transceivers. See “Industrial Transceivers” on page 1-28.
• Fibre Channel Transceivers. See “Fibre Channel Transceivers” on page 1-27.
• For a transceiver compatibility matrix, see “Transceiver Compatibility Matrix” on page 2-33.

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-1

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

SFP MSA Specification

SFP MSA Specification
The Small Form-Factor Pluggable (SFP) MSA (Multi Source Agreement) is a specification for a common
interface for optical modular transceivers. The SFP connector consists of a 20-pin receptacle and an SFP
housing cage. The connector provides the interface for the hot pluggable SFP module. Each SFP module
contains a serial interface to provide identification information that describes the SFP capabilities, stand
interfaces, manufacturer and other information.
For information on installing SFPs, refer to the documentation included with the transceiver.

This diagram is a representation
only; the physical appearance of the
actual module may vary slightly.

Small Form Factor Pluggable (SFP)

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-2

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Transceiver Installation and Removal

Transceiver Installation and Removal
Follow the instructions below for the appropriate transceiver type.
ESD Caution: Before handling the module, you must discharge all static electricity on your person to
avoid Electrostatic Discharge (ESD) damage. If using a wrist strap, ensure that the wrist strap touches
your skin. Attach the other end of the strap to the chassis. If your chassis provides a grounding lug, this
can be used. Refer to your hardware user guide for details.
If using a wrist strap, ensure that the wrist strap touches your skin. Attach the other end of the strap to the
chassis. If your chassis provides a grounding lug, this can be used. Refer to your hardware user guide for
details.
Dust Exposure: To reduce the risk of dust exposure and physical damage, be sure to replace the protective rubber cover (provided) when the SFP is not in use.
Eye Safety: SFP transceivers are international Class 1 laser products and are eye-safe devices when operated within the limits of manufacturers’ specifications. Operating SFP transceivers in a manner inconsistent with intended usage and specification may result in hazardous radiation exposure.

Note: After removing a transceiver, wait for a minimum of 5 seconds before re-inserting any transceiver
into the same port. This allows sufficient time for software to detect the removal of the transceiver.
Note: Never force the transceiver in or out of the transceiver slot.

Interface Slot

To remove, you must first open the SFP’s hinged face to approximately ninety
degrees. Then, grasp the hinged face and carefully pull the SFP straight out of
the slot.
When inserting a SFP, be sure that the hinged face is closed. Slide the SFP
straight into the slot until the module clicks firmly into place.

SFP Module

SFP - Hinged

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-3

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Transceiver Installation and Removal

To install, align the transceiver with the transceiver slot on the
NI module, as shown. Be sure that the bail wire delatch is in the
up, or closed position. Slide the transceiver straight into the slot
until the module clicks firmly into place.
To remove, you must first pull down on the bail
wire delatch. Grip the wire delatch while it is in this
open position and carefully pull the transceiver
straight out of the slot.

SFP Transceiver

Transceiver Slot

Bail Wire Delatch
(Shown in open “removal” position; when inserting, bail
delatch must be closed.)

Network Interface (NI)
Module

SFP - Bail Wire

To install, align the transceiver with the
transceiver slot on the NI module, as
shown. Carefully slide the transceiver
back until it clicks into place; this is an
indication that the connectors are firmly
seated.

Network Interface (NI) Module

SFP Transceiver

To remove, use the ejector tool (provided
with each switch chassis) to push the transceiver’s ejector button. The ejector button is
located just below the transceiver port; refer
to the diagram for more information. The
transceiver will disengage from the connectors and eject slightly. Once disengaged, use
the clip end of the ejector tool to carefully
pull the transceiver straight out and away
from the NI module.

Transceiver Slot
Ejector

Dust Cover

SFP - Ejector Button

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-4

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

To install, align the transceiver with the
transceiver slot on the NI module, as
shown. Carefully slide the transceiver
back until it clicks into place; this is an
indication that the connectors are firmly
seated.

Transceiver Installation and Removal

Network Interface (NI) Module

QSFP+ Transceiver

To remove, use the rubber or metal ejector
handle and pull transceiver straight out and
away from the NI module.
Note: Never force the transceiver in or out of
the transceiver slot.

Transceiver Slot

Handle

QSFP+ - Removal

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-5

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

40-Gigabit Fiber Optic Cables

40-Gigabit Fiber Optic Cables
QSFP to QSFP 40G Fiber Optic Cable
To directly connect two Omniswitches with a 40G transceiver, an MPO trunk cable can be used. The cable
can have 8 or 12 fibers, however, the 40G standard only uses 8 fibers. The cable should be a Type-B
crossover cable. This type of cable should be used with the QSFP-40G-SR transceiver.
Fiber
Type A

Type B

QSFP

1

2

3

4

5-8

9

10

11

12

MPO1 Tx1

Tx2

Tx3

Tx4

N/A

Rx4

Rx3

Rx2

Rx1

MPO2 Rx1

Rx2

Rx3

Rx4

N/A

Tx4

Tx3

Tx2

Tx1

Fiber

1

2

3

4

5-8

9

10

11

12

Fiber

1

2

3

4

5-8

9

10

11

12

MPO1 Rx1

Rx2

Rx3

Rx4

N/A

Tx4

Tx3

Tx2

Tx1

MPO2 Tx1

Tx2

Tx3

Tx4

N/A

Rx4

Rx3

Rx2

Rx1

Fiber

11

10

9

5-8

4

3

2

1

12

MPO Connectors

QSFP

Example Type B - MPO Cable Connection

QSFP to SFP+ Splitter Fiber Optic Cable
To connect a 40G transceiver to four 10G transceivers an MTP-LC splitter cable can be used. The MPOLC cable has eight fibers that connect the 40G MPO connector to four 10G LC connectors. This type of
cable should be used with the QSFP-4X10G-SR transceiver. The LC connectors can be manually
rearranged to meet the necessary transmit/receive requirements.

LC/SFP4
LC/SFP3

MPO

LC/SFP2
LC/SFP1
Example MPO/LC Splitter Cable

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-6

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Gigabit Ethernet Transceivers

Gigabit Ethernet Transceivers
SFP-GIG-SX
Gigabit SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3z, SFP MSA

Connections Supported

1000Base-SX

Fiber Type

MMF

Wavelength

850 nm

Optical Power Output

-9.0 to -2.5 dBm

Receiver Sensitivity

-17 dBm

Transmission Distance

~300 m on 62.5/125µm
~550 m on 50/125µm

Operating Temperature

-20 ºC to 85ºC

Digital Diagnostic Monitoring

Supported (Alcatel-Lucent branded transceivers only)

SFP-GIG-LX
Gigabit SFP Optical Transceiver.

Connector types

LC

Standards supported

802.3z, SFP MSA

Connections supported

1000Base-LX

Fiber Type

SMF

Wavelength

1310 nm

Optical Power Output

-9.5 to -3 dBm

Receiver Sensitivity

-14.5 dBm

Transmission Distance

10 km

Operating Temperature

-40 ºC to 85 ºC / 0 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported (Alcatel-Lucent branded transceivers only)

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-7

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Gigabit Ethernet Transceivers

SFP-GIG-LH40
Gigabit SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3z, SFP MSA

Connections Supported

1000Base-LH40r

Fiber Type

SMF

Wavelength

1310 nm

Optical Power Output

0 to +5 dBm

Receiver Sensitivity

-22 dBm

Transmission Distance

~40 km

Operating Temperature

-10 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

SFP-GIG-LH70
Gigabit SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3z, SFP MSA

Connections Supported

1000Base-LH70

Fiber Type

SMF

Wavelength

1550 nm

Optical Power Output

0 to +5 dBm

Receiver Sensitivity

-22 dBm

Transmission Distance

~70 km

Operating Temperature

-10 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-8

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Gigabit Ethernet Transceivers

SFP-GIG-CWD
Coarse Wavelength Division Multiplexing (CWDM) is an optical transceiver supporting single-mode fiber
over various wavelengths. CWDMs are hot-pluggable and are available for long-reach applications.

Connector Type

LC

Standards Supported

802.3z, SFP MSA

Connections Supported

1000Base-LX

Fiber Type

SMF

Wavelength

1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610

Optical Power Output

-2 to +3 dBm

Receiver Sensitivity

-24 dBm

Transmission Distances

~62 km

Operating Temperature

-5 ºC to 70 ºC

Digital Diagnostic Monitoring

Not Supported

SFP-GIG-T
Gigabit SFP Copper Transceiver.

Connector Type

RJ-45

Standards Supported

802.3z, SFP MSA

Connections supported

10/100/1000Base-T

Cable Type

CAT5, CAT5e, CAT6

Transmission Distance

100 m

Digital Diagnostic Monitoring

Not Supported

SFP-GIG-EXTND
Gigabit SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3, SFP MSA

Connections Supported

-

Fiber Type

MMF

Wavelength

1310 nm

Saturation Power

0 dBm

Transmission Distance

~2 km

Operating Temperature

0 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-9

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Gigabit Ethernet Transceivers

SFP-GIG-BX-D
Bi-Directional SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3ah, SFP MSA

Connections Supported

1000Base-BX10

Fiber Type

SMF

Wavelength

Transmit: 1490 nm
Receive: 1310 nm

Average Power Output

-9 to -3 dBm

Receiver Sensitivity

-19.5 dBm

Transmission Distance

~10 km

Operating Temperature

0 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

Notes

Designed for use with SFP-GIG-BX-U

SFP-GIG-BX-U
Bi-Directional SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3ah, SFP MSA

Connections Supported

1000Base-BX10

Fiber Type

SMF

Wavelength

Transmit: 1310 nm
Receive: 1490 nm

Average Power Output

-9 to -3 dBm

Receiver Sensitivity

-19.5 dBm

Transmission Distance

~10 km

Operating Temperature

0 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

Notes

Designed for use with SFP-GIG-BX-D

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-10

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Gigabit Ethernet Transceivers

SFP-GIG-BX-D20
Bi-Directional SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3ah, SFP MSA

Connections Supported

1000Base-BX20

Fiber Type

SMF

Wavelength

Transmit: 1490 nm
Receive: 1310 nm

Average Power Output

-8 to -3 dBm

Receiver Sensitivity

-23 dBm

Transmission Distance

~20 km

Operating Temperature

-5 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

Notes

Designed for use with SFP-GIG-BX-U20

SFP-GIG-BX-U20
Bi-Directional SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3ah, SFP MSA

Connections Supported

1000Base-BX20

Fiber Type

SMF

Wavelength

Transmit: 130 nm
Receive: 1490 nm

Average Power Output

-8 to -3 dBm

Receiver Sensitivity

-23 dBm

Transmission Distance

~20 km

Operating Temperature

-5 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

Notes

Designed for use with SFP-GIG-BX-D20

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-11

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Gigabit Ethernet Transceivers

SFP-GIG-BX-D40
Bi-Directional SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3ah, SFP MSA

Connections Supported

1000Base-BX40

Fiber Type

SMF

Wavelength

Transmit: 1490 nm
Receive: 1310 nm

Average Power Output

-2 to +3 dBm

Receiver Sensitivity

-23 dBm

Transmission Distance

~40 km

Operating Temperature

-5 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

Notes

Designed for use with SFP-GIG-BX-U40

SFP-GIG-BX-U40
Bi-Directional SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3ah, SFP MSA

Connections Supported

1000Base-BX20

Fiber Type

SMF

Wavelength

Transmit: 1310 nm
Receive: 1490 nm

Average Power Output

-2 to +3 dBm

Receiver Sensitivity

-23 dBm

Transmission Distance

~40 km

Operating Temperature

-5 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

Notes

Designed for use with SFP-GIG-BX-D40

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-12

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Dual Speed Ethernet Transceivers

Dual Speed Ethernet Transceivers
SFP-DUAL-MM
Dual speed Optical Transceiver.

Connector Type

LC

Standards Supported

802.3z, 802.3ah, SFP MSA

Connections Supported

100Base-FX, 1000Base-LX

Fiber Type

MMF

Wavelength

1310 nm

Average Power Output

100Base-FX: -20 to -14 dBm
1000Base-LX: -11.5 to -3 dBm

Receiver Sensitivity

100Base-FX: -28 dBm
1000Base-LX: -22 dBm

Transmission Distance

550 m at 1000 Mbps
2 km at 100 Mbps

Operating Temperature

0 ºC to 70 ºC

Digital Diagnostic Monitoring

Not Supported

SFP-DUAL-SM10
Dual speed Optical Transceiver.

Connector Type

LC

Standards Supported

802.3z, 802.3ah, SFP MSA

Connections Supported

100Base-FX, 1000Base-LX

Fiber Type

SMF

Wavelength

1310 nm

Average Power Output

100Base-FX: -15 to -8 dBm
1000Base-LX: -9.5 to -3 dBm

Receiver Sensitivity

100Base-FX: -28 dBm
1000Base-LX: -22 dBm

Transmission Distance

~10 km

Operating Temperature

0 ºC to 70 ºC

Digital Diagnostic Monitoring

Not Supported

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-13

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Dual Speed Ethernet Transceivers

SFP-DUAL-BX-D
Dual speed Optical Transceiver.

Connector Type

LC

Standards Supported

802.3z, 802.3ah, SFP MSA

Connections Supported

1000BASE-BX10-D

Fiber Type

SMF

Wavelength

Transmit: 1550 nm
Receive: 1310 nm

Average Power Output

-9 to -3 dBm

Receiver Sensitivity

-18.7 dBm

Transmission Distance

~10 km

Operating Temperature

-5 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

SFP-DUAL-BX-U
Dual speed Optical Transceiver.

Connector Type

LC

Standards Supported

802.3z, 802.3ah, SFP MSA

Connections Supported

1000BASE-BX10-U

Fiber Type

SMF

Wavelength

Transmit: 1310 nm
Receive: 1550 nm

Average Power Output

-9 to -3 dBm

Receiver Sensitivity

-18.7 dBm

Transmission Distance

~10 km

Operating Temperature

-5 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-14

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

100 FX Ethernet Transceivers

100 FX Ethernet Transceivers
SFP-100-BX20LT
Bi-Directional SFP Optical Transceiver.

Connector Type

SC

Standards Supported

802.3ah, SFP MSA, ITU-T G.983

Connections Supported

100Base-BX

Fiber Type

SMF

Wavelength

Transmit: 1550 nm
Receive: 1310 nm

Average Power Output

-14 to -8 dBm

Receiver Sensitivity

-32 dBm

Transmission Distance

~20 km

Operating Temperature

0 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

Notes

Designed for use with SFP-100-BX20NU

SFP-100-BX20NU
Bi-Directional SFP Optical Transceiver.

Connector Type

SC

Standards Supported

802.3ah, SFP MSA, ITU-T G.983

Connections Supported

100Base-BX

Fiber Type

SMF

Wavelength

Transmit: 1310 nm
Receive: 1550 nm

Average Power Output

-14 to -8 dBm

Receiver Sensitivity

-32 dBm

Transmission Distance

~20 km

Operating Temperature

0 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

Notes

Designed for use with SFP-100-BX20LT

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-15

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

100 FX Ethernet Transceivers

SFP-100-BXLC-D
Bi-Directional SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3ah, SFP MSA, ITU-T G.983

Connections Supported

100Base-BX

Fiber Type

SMF

Wavelength

Transmit: 1550 nm
Receive: 1310 nm

Average Power Output

-14 to -8 dBm

Receiver Sensitivity

-32 dBm

Transmission Distance

~20 km

Operating Temperature

0 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

Notes

Designed for use with SFP-100-BXLC-U

SFP-100-BXLC-U
Bi-Directional SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3ah, SFP MSA, ITU-T G.983

Connections Supported

100Base-BX

Fiber Type

SMF

Wavelength

Transmit: 1310 nm
Receive: 1550 nm

Average Power Output

-14 to -8 dBm

Receiver Sensitivity

-32 dBm

Transmission Distance

~20 km

Operating Temperature

0 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

Notes

Designed for use with SFP-100-BXLC-D

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-16

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

SFP-100-LC-MM
SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3u, SFP MSA

Connections supported

100Base-FX

Fiber Type

MMF

Wavelength

1310 nm

Optical Power Output

-19 to -14 dBm on 62.5/125µm
-22 to 14 dBm on 50/125µm

Transmission Distance

~2 km on 62.5/125µm
~2 km on 50/125µm

Operating Temperature

0 ºC to 70 ºC

Digital Diagnostic Monitoring

Not Supported

SFP-100-LC-SM15
SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3u, SFP MSA

Connections Supported

100Base-FX

Fiber Type

SMF

Wavelength (nm)

1310 nm

Optical Power Output

-15 to -8 dBm

Receiver Sensitivity

-34 dBm

Transmission Distance

~15 km

Operating Temperature

0 ºC to 70 ºC

Digital Diagnostic Monitoring

Not Supported

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-17

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

SFP-100-LC-SM40
SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3u, SFP MSA

Connections Supported

100Base-FX

Fiber Type

SMF

Wavelength

1310 nm

Optical Power Output

-15 to -8 dBm

Receiver Sensitivity

-34 dBm

Transmission Distances

~40 km

Operating Temperature

0 ºC to 70 ºC

Digital Diagnostic Monitoring

Not Supported

.

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-18

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

10-Gigabit SFP+ Transceivers

10-Gigabit SFP+ Transceivers
SFP-10G-SR
10-Gigabit SFP+ Optical Transceiver.

Connector Type

LC

Standards Supported

802.3 Clause 52

Connections supported

10GBase-SR

Fiber Type

MMF

Wavelength

850 nm

Optical Power Output

-7.3 to -3.0 dBm

Receiver Sensitivity

-11.1 dBm

Transmission Distance

~ 300 m

Operating Temperature

-5 ºC to 70ºC

Maximum Power Consumption

1W

Digital Diagnostic Monitoring

Supported

SFP-10G-LR
10-Gigabit SFP+ Optical Transceiver.

Connector Type

LC

Standards Supported

802.3 Clause 52

Connections supported

10GBase-LR

Fiber Type

SMF

Wavelength

1310 nm

Optical Power Output

-8.2 to 0.5 dBm

Receiver Sensitivity

-10.3 dBm

Transmission Distance

~ 10 km

Operating Temperature

-5 ºC to 70ºC

Maximum Power Consumption

1W

Digital Diagnostic Monitoring

Supported

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-19

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

10-Gigabit SFP+ Transceivers

SFP-10G-ER
10-Gigabit SFP+ Optical Transceiver.

Connector Type

LC

Standards Supported

802.3ae

Connections supported

10GBase-E

Fiber Type

SMF

Wavelength

1550 nm

Optical Power Output

-4.7 to 4.0 dBm

Receiver Sensitivity

-14.1 dBm

Transmission Distance

~ 40 km

Operating Temperature

-5 ºC to 70 ºC

Maximum Power Consumption

1.5 W

Digital Diagnostic Monitoring

Supported

SFP-10G-LRM
10-Gigabit SFP+ Optical Transceiver.

Connector Type

LC

Standards Supported

802.3aq

Connections supported

10GBase-LRM

Fiber Type

MMF

Wavelength

1310 nm

Optical Power Output

-4.5 to 1.5dBm

Receiver Sensitivity

-6.5 dBm

Transmission Distance

~ 220 m

Operating Temperature

-5 ºC to 70ºC

Maximum Power Consumption

1 Watt

Digital Diagnostic Monitoring

Supported

SFP-10G-ZR
10-Gigabit SFP+ Optical Transceiver.

Connector Type

LC

Standards Supported

802.3ae

Connections supported

10GBase-ZR

Fiber Type

SMF

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-20

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

10-Gigabit SFP+ Transceivers

SFP-10G-ZR
10-Gigabit SFP+ Optical Transceiver.

Wavelength

1550 nm

Optical Power Output

0 to +5 dBm

Receiver Sensitivity

-20 dBm

Transmission Distance

~ 80 km

Operating Temperature

-5 ºC to 70 ºC

Maximum Power Consumption

1.2 W

Digital Diagnostic Monitoring

Supported

SFP-10G-C
10-Gigabit SFP+ Direct Attach Copper Cable.

Connector Type

Direct Attached Copper

Standards Supported

802.3ae, SFF-8431

Cable Length

1m, 3m, 7m1

Wire Gauge

24AWG

Bend Radius

1.25 in.

Digital Diagnostic Monitoring

Not Supported

1. Check for availability of additional supported lengths.

SFP-10G-24DWD80
10-Gigabit SFP+ Optical Transceiver.

Connector Type

LC

Standards Supported

802.3ae

Connections supported

10GBase-ZR

Fiber Type

SMF

Wavelength

1558.17 nm

Optical Power Output

0 to 5dBm

Receiver Sensitivity

-23 dBm

Transmission Distance

~ 80 km

Operating Temperature

-5ºC to 70ºC

Maximum Power Consumption

1.2 Watt

Digital Diagnostic Monitoring

Supported

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-21

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

10-Gigabit SFP+ Transceivers

SFP-10G-GIG-SR
10-Gigabit SFP+ Optical Transceiver.

Connector Type

LC

Standards Supported

802.3-2005

Connections supported

10GBase-SR/SW, 1000Base-SX

Fiber Type

MMF

Wavelength

850 nm

Optical Power Output

-5 to -1 @ 10G
-9.5 to -1dBm @ 1G

Receiver Sensitivity

-11.1 dBm @ 10G
-17 dBm @ 1G

Transmission Distance

OM1: ~33m @ 10G, ~275m @ 1G
OM2: ~82m @ 10G, ~550m @ 1G
OM3: ~300m @ 10G, ~550m @ 1G

Operating Temperature

0ºC to 70ºC

Maximum Power Consumption

<1.0 Watt

Digital Diagnostic Monitoring

Supported

SFP-10G-GIG-LR
10-Gigabit SFP+ Optical Transceiver.

Connector Type

LC

Standards Supported

802.3-2005

Connections supported

10GBase-LR/LW, 1000Base-LX

Fiber Type

SMF

Wavelength

1310 nm

Optical Power Output

-8.2 to +5 dBm @ 10G
-11 to -3 dBm @ 1G

Receiver Sensitivity

-12.6 dBm @ 10G
-19 dBm @ 1G

Transmission Distance

~10 km

Operating Temperature

-5ºC to 70ºC

Maximum Power Consumption

<1.0 Watt

Digital Diagnostic Monitoring

Supported

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-22

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

40-Gigabit QSFP+ Transceivers

40-Gigabit QSFP+ Transceivers
CAUTION - CLASS 1M LASER RADIATION WHEN OPEN. DO NOT VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS.

QSFP-40G-SR
Four channel 40-Gigabit QSFP+ Optical Transceiver.

Connector Type

MPO

Standards Supported

802.3ba, QSFP+ MSA

Connections supported

40GBase-SR4

Fiber Type

MMF

Wavelength

850 nm

Optical Power Output

-7.6 to +2.4 dBm

Receiver Sensitivity

-5.4 dBm

Transmission Distance

OM3 - ~ 100 m
OM4 - ~150 m

Operating Temperature

0 ºC to 70ºC

Maximum Power Consumption

1.5 W

Digital Diagnostic Monitoring

Supported1

QSFP-40G-LR
Four channel 40-Gigabit QSFP+ Optical Transceiver.

Connector Type

LC

Standards Supported

802.3ba, QSFP+ MSA

Connections supported

40GBase-LR4

Fiber Type

SMF

Wavelength

1310 nm

Optical Power Output

-7.0 to +2.3 dBm

Receiver Sensitivity

-11.5 dBm

Transmission Distance

10 km

Operating Temperature

0 ºC to 70ºC

Maximum Power Consumption

< 3.5 W

Digital Diagnostic Monitoring

Supported1

1. Supports the DDM parameters of Voltage (V), Temperature (T), Current (mA) and Input (dBm). If the
threshold values of the transceiver are ‘0’ then NS will be displayed in the DDM output display.

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-23

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

40-Gigabit QSFP+ Transceivers

QSFP-40G-C
Four channel 40-Gigabit QSFP+ Direct Attach Copper Cable

Connector Type

Direct Attached Copper

Standards Supported

802.3ba, QSFP+ MSA

Cable Length

1m, 3m, 7m1,2

Wire Gauge

26AWG

Bend Radius

1.69 in.

Digital Diagnostic Monitoring

Not Supported

1. Check for availability of lengths.
2. The QSFP-40G-C7 (7m) cable has been verified for proper operation when connected between OmniSwitch products. When connecting this cable between an OmniSwitch and other vendors’ equipment, it’s
recommended to verify proper operation prior to network deployment.

QSFP-4X10G-SR
Four channel 40-Gigabit QSFP+ Optical Transceiver. Connects a single 40G QSFP+ port to four 10G SFP+
ports

Connector Type

MPO

Standards Supported

802.3ba, 802.3ae, QSFP+ MSA

Connections supported

40GBase-SR4, 10GBase-SR

Fiber Type

MMF

Wavelength

850 nm

Optical Power Output

-7.5 to +0.5 dBm

Receiver Sensitivity

-7.5 dBm (SRS)

Transmission Distance

OM3 - ~ 300 m
OM4 - ~400 m

Operating Temperature

0 ºC to 70ºC

Maximum Power Consumption

1.5 W

Digital Diagnostic Monitoring

Supported

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-24

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

40-Gigabit QSFP+ Transceivers

QSFP-4X10G-C
Four channel 40-Gigabit QSFP+ Direct Attached Copper Splitter Cable. Connects a single 40G QSFP+ port to
four 10G SFP+ ports

Connector Type

Direct Attached Copper Splitter Cable

Cable Length

1m, 3m, 5m

Digital Diagnostic Monitoring

Not Supported

QSFP-40G-AOC20M
Description

Four channel 40-Gigabit QSFP+ active optical cable

Connector Type

Direct attached

Standards Supported

802.3ba, QSFP+ MSA

Connections supported

40GBase-SR4

Cable Length

20 m

Bend Radius

45 mm

Operating Temperature

0 ºC to 70ºC

Maximum Power Consumption

< 1.3 W

Digital Diagnostics Monitoring

Supported

OS6860-CBL-100
Description

20-Gigabit QSFP+ direct attached copper transceiver.

Connector Type

Direct Attached Copper

Standards Supported

802.3ba, QSFP+ MSA

Cable Length

1m

Wire Gauge

26AWG

Bend Radius

1.69 in.

Digital Diagnostics Monitoring

Not Supported

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-25

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

40-Gigabit QSFP+ Transceivers

OS6860-CBL-300
Description

20-Gigabit QSFP+ direct attached copper transceiver.

Connector Type

Direct Attached Copper

Standards Supported

802.3ba, QSFP+ MSA

Cable Length

3m

Wire Gauge

26AWG

Bend Radius

1.69 in.

Digital Diagnostics Monitoring

Not Supported

OS6860-CBL-40
Description

20-Gigabit QSFP+ direct attached copper transceiver.

Connector Type

Direct Attached Copper

Standards Supported

802.3ba, QSFP+ MSA

Cable Length

40cm

Wire Gauge

26AWG

Bend Radius

1.69 in.

Digital Diagnostics Monitoring

Not Supported

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-26

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Fibre Channel Transceivers

Fibre Channel Transceivers
SFP-FC-SR
Triple-speed SFP+ Fibre Channel optical transceiver.
Connector Type

LC

Standards Supported

FC-PI-4

Connections supported

Auto-sensing 2G, 4G, 8G

Fiber Type

MMF

Wavelength

850 nm

Average Optical Power Output
Transmission Distance

1

-8.2 dBm
OM3: ~150m @ 8Gbps, 310m @ 4Gbps, 500m @ 2Gbps
OM1: ~21m @ 8Gbps, 70m @ 4Gbps, 150m @ 2Gbps

Operating Temperature

0 ºC to 85ºC

Maximum Power Consumption

3.3 V

Digital Diagnostic Monitoring

Supported

1. Distances based on FC-PI-4 specification.

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-27

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Industrial Transceivers

Industrial Transceivers
iSFP-GIG-SX
Gigabit SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3z, SFP MSA

Connections Supported

1000Base-SX

Fiber Type

MMF

Wavelength

850 nm

Optical Power Output

-9.0 to -2.5 dBm

Receiver Sensitivity

-18 dBm

Transmission Distance

~300 m on 62.5/125µm
~500 m on 50/125µm

Operating Temperature

-40ºC to 85ºC

Digital Diagnostic Monitoring

Supported

iSFP-GIG-LX
Gigabit SFP Optical Transceiver.

Connector types

LC

Standards supported

802.3z, SFP MSA

Connections supported

1000Base-LX

Fiber Type

SMF

Wavelength

1310 nm

Optical Power Output

-9.5 to -3 dBm

Receiver Sensitivity

-14.5 dBm

Transmission Distance

10 km

Operating Temperature

-40 ºC to 85 ºC / 0 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported (Alcatel-Lucent branded transceivers only)

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-28

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Industrial Transceivers

iSFP-GIG-LH40
Gigabit SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3z, SFP MSA

Connections Supported

1000Base-LH40

Fiber Type

SMF

Wavelength

1310 nm

Optical Power Output

-2 to +3 dBm

Receiver Sensitivity

-23 dBm

Transmission Distance

~40 km

Operating Temperature

-40 ºC to 85 ºC

Digital Diagnostic Monitoring

Supported

iSFP-GIG-LH70
Gigabit SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3z, SFP MSA

Connections Supported

1000Base-LH70

Fiber Type

SMF

Wavelength

1550 nm

Optical Power Output

0 to +5 dBm

Receiver Sensitivity

-22 dBm

Transmission Distance

~70 km

Operating Temperature

-10 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-29

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Industrial Transceivers

iSFP-GIG-T
Gigabit SFP Copper Transceiver.

Connector Type

RJ-45

Standards Supported

802.3z, SFP MSA

Connections supported

10/100/1000Base-T

Cable Type

CAT5, CAT5e, CAT6

Transmission Distance

100 m

Digital Diagnostic Monitoring

Not Supported

iSFP-GIG-BX-D
Bi-Directional SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3ah, SFP MSA

Connections Supported

1000Base-BX10

Fiber Type

SMF

Wavelength

Transmit: 1490 nm
Receive: 1310 nm

Average Power Output

-9 to -3 dBm

Receiver Sensitivity

-19.5 dBm

Transmission Distance

~10 km

Operating Temperature

-40 ºC to 85 ºC

Digital Diagnostic Monitoring

Supported

Notes

Designed for use with iSFP-GIG-BX-U

iSFP-GIG-BX-U
Bi-Directional SFP Optical Transceiver.

Connector Type

LC

Standards Supported

802.3ah, SFP MSA

Connections Supported

1000Base-BX10

Fiber Type

SMF

Wavelength

Transmit: 1310 nm
Receive: 1490 nm

Average Power Output

-9 to -3 dBm

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-30

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Industrial Transceivers

iSFP-GIG-BX-U
Bi-Directional SFP Optical Transceiver.

Receiver Sensitivity

-19.5 dBm

Transmission Distance

~10 km

Operating Temperature

0 ºC to 70 ºC

Digital Diagnostic Monitoring

Supported

Notes

Designed for use with iSFP-GIG-BX-D

iSFP-10G-SR
10-Gigabit SFP+ Optical Transceiver.

Connector Type

LC

Standards Supported

802.3 Clause 52

Connections supported

10GBase-SR

Fiber Type

MMF

Wavelength

850 nm

Optical Power Output

-7.3 to -3.0 dBm

Receiver Sensitivity

-11.1 dBm

Transmission Distance

~ 300 m

Operating Temperature

-5 ºC to 70ºC

Maximum Power Consumption

1W

Digital Diagnostic Monitoring

Supported

iSFP-10G-LR
10-Gigabit SFP+ Optical Transceiver.

Connector Type

LC

Standards Supported

802.3 Clause 52

Connections supported

10GBase-LR

Fiber Type

SMF

Wavelength

1310 nm

Optical Power Output

-8.2 to 0.5 dBm

Receiver Sensitivity

-10.3 dBm

Transmission Distance

~ 10 km

Operating Temperature

-5 ºC to 70ºC

Maximum Power Consumption

1W

Digital Diagnostic Monitoring

Supported

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-31

Small Form-Factor Pluggables (SFP/SFP+/QSFP+)

Industrial Transceivers

iSFP-10G-ER
10-Gigabit SFP+ Optical Transceiver.

Connector Type

LC

Standards Supported

802.3ae

Connections supported

10GBase-E

Fiber Type

SMF

Wavelength

1550 nm

Optical Power Output

-4.7 to 4.0 dBm

Receiver Sensitivity

-14.1 dBm

Transmission Distance

~ 40 km

Operating Temperature

-5 ºC to 70 ºC

Maximum Power Consumption

1.5 W

Digital Diagnostic Monitoring

Supported

iSFP-10G-C
10-Gigabit SFP+ Direct Attach Copper Cable.

Connector Type

Direct Attached Copper

Standards Supported

802.3ae, SFF-8431

Cable Length

1m, 3m, 7m1

Wire Gauge

24AWG

Bend Radius

1.25 in.

Digital Diagnostic Monitoring

Not Supported

1. Check for availability of lengths.

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 1-32

Transceiver Compatibility Matrix

2

In This Chapter

Transceiver Compatibility
Matrix

In This Chapter
The following sections document the transceiver configurations and minimum release required for support
on the OmniSwitch.
Compatibility specifications in this chapter include:
• OmniSwitch 10K . See “OmniSwitch 10K Compatibility” on page 2-34
• OmniSwitch 6900 . See “OmniSwitch 6900 Compatibility” on page 2-36
• OmniSwitch 6860. See “OmniSwitch 6860 Compatibility” on page 2-38
• OmniSwitch 6865. See “OmniSwitch 6865 Compatibility” on page 2-40
• OmniSwitch 9900. See “OmniSwitch 9900 Compatibility” on page 2-41

Note: For transceivers supporting Digital Diagnostics Monitoring there may be a slight variance between
actual and reported values for both the transmit and receive side depending on the transceiver.

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 2-33

Transceiver Compatibility Matrix

OmniSwitch 10K Compatibility

OmniSwitch 10K Compatibility
The following table shows the available transceivers and minimum release required for support:
Transceiver

OS10KGNI-U48

OS10K-XNI
U32/U16

OS10K-QNI
U4/U8

SFP-GIG-SX

7.1.1

7.1.1

Not Supported

SFP-GIG-LX

7.1.1

7.1.1

Not Supported

SFP-GIG-LH40

7.1.1

7.1.1

Not Supported

SFP-GIG-LH70

7.1.1

7.1.1

Not Supported

SFP-GIG-CWD

7.1.1

7.1.1

Not Supported

SFP-GIG-T

7.1.1

7.1.11

Not Supported

SFP-GIG-EXTND

7.1.1

7.1.1

Not Supported

SFP-GIG-BX-D

7.1.1

7.1.1

Not Supported

SFP-GIG-BX-U

7.1.1

7.1.1

Not Supported

SFP-GIG-BX-D20

Not Supported

Not Supported

Not Supported

SFP-GIG-BX-U20

Not Supported

Not Supported

Not Supported

SFP-GIG-BX-D40

Not Supported

Not Supported

Not Supported

SFP-GIG-BX-U40

Not Supported

Not Supported

Not Supported

SFP-DUAL-MM

Not Supported

Not Supported

Not Supported

SFP-DUAL-SM10

Not Supported

Not Supported

Not Supported

SFP-DUAL-BX-D

Not Supported

Not Supported

Not Supported

SFP-DUAL-BX-U

Not Supported

Not Supported

Not Supported

SFP-100-BX20LT

7.1.1

Not Supported

Not Supported

SFP-100-BX20NU

7.1.1

Not Supported

Not Supported

SFP-100-BXLC-D

7.1.1

Not Supported

Not Supported

SFP-100-BXLC-U

7.1.1

Not Supported

Not Supported

SFP-100-LC-MM

7.1.1

Not Supported

Not Supported

SFP-100-LC-SM15

7.1.1

Not Supported

Not Supported

SFP-100-LC-SM40

7.1.1

Not Supported

Not Supported

SFP-10G-SR

Not Supported

7.1.1

Not Supported

SFP-10G-LR

Not Supported

7.1.1

Not Supported

SFP-10G-ER

Not Supported

7.1.1

Not Supported

SFP-10G-LRM

Not Supported

7.1.1

Not Supported

SFP-10G-ZR

Not Supported

7.3.4

Not Supported

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 2-34

Transceiver Compatibility Matrix

Transceiver

OmniSwitch 10K Compatibility

OS10KGNI-U48

OS10K-XNI
U32/U16

OS10K-QNI
U4/U8

SFP-10G-C

Not Supported

7.1.1

Not Supported

SFP-10G-24DWD80

Not Supported

7.3.1

Not Supported

SFP-10G-GIG-SR

Not Supported

7.3.1

Not Supported

SFP-10G-GIG-LR

Not Supported

Not Supported

Not Supported

SFP-FC-SR

Not Supported

Not supported

Not Supported

QSFP-40G-SR

Not Supported

Not Supported

7.3.1.R01

QSFP-40G-LR

Not Supported

Not Supported

7.3.1.R01

QSFP-40G-C

Not Supported

Not Supported

7.3.1.R01

QSFP-4X10G-SR

Not Supported

Not Supported

Not Supported

QSFP-4X10G-C

Not Supported

Not Supported

Not Supported

QSFP-40G-AOC20M

Not Supported

Not Supported

Not Supported

1. Only supports 1000-Mbits when used on OS10K-XNI-U32.

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 2-35

Transceiver Compatibility Matrix

OmniSwitch 6900 Compatibility

OmniSwitch 6900 Compatibility
The following table shows the available transceivers and minimum release required for support:
Transceiver

OS6900X20/X40

OS6900-Q32

OS6900-X72

XNI-U4/U12

HNI-U6

QNI-U3

XNI-U12E

SFP-GIG-SX

7.2.1

N/S

7.3.4.R02

7.2.1

7.2.1.R02

N/S

7.3.3

SFP-GIG-LX

7.2.1

N/S

7.3.4.R02

7.2.1

7.2.1.R02

N/S

7.3.3

SFP-GIG-LH40

7.2.1

N/S

7.3.4.R02

7.2.1

7.2.1.R02

N/S

7.3.3

SFP-GIG-LH70

7.2.1

N/S

7.3.4.R02

7.2.1

7.2.1.R02

N/S

7.3.3

SFP-GIG-CWD

N/S

N/S

N/S

N/S

N/S

N/S

N/S

N/S

1

7.3.4.R02

1

7.2.1

N/S

N/S

7.3.31

7.2.1

N/S

7.3.4.R02

7.2.1

N/S

N/S

7.3.3

SFP-GIG-BX-D

7.2.1

N/S

7.3.4.R02

7.2.1

7.2.1

N/S

7.3.3

SFP-GIG-BX-U

7.2.1

N/S

7.3.4.R02

7.2.1

7.2.1

N/S

7.3.3

SFP-GIG-T

1

7.2.1

SFP-GIG-EXTND

SFP-GIG-BX-D20

Not Supported

SFP-GIG-BX-U20

Not Supported

SFP-GIG-BX-D40

Not Supported

SFP-GIG-BX-U40

Not Supported

SFP-DUAL-MM

Not Supported

SFP-DUAL-SM10

Not Supported

SFP-DUAL-BX-D

Not Supported

SFP-DUAL-BX-U

Not Supported

SFP-100-BX20LT

Not Supported

SFP-100-BX20NU

Not Supported

SFP-100-BXLC-D

Not Supported

SFP-100-BXLC-U

Not Supported

SFP-100-LC-MM

Not Supported

SFP-100-LC-SM15

Not Supported

SFP-100-LC-SM40

Not Supported

SFP-10G-SR

7.2.1

N/S

7.3.4.R02

7.2.1

7.2.1

N/S

7.3.3

SFP-10G-LR

7.2.1

N/S

7.3.4.R02

7.2.1

7.2.1

N/S

7.3.3

SFP-10G-ER

7.2.1

N/S

7.3.4.R02

7.2.1

7.2.1

N/S

7.3.3

SFP-10G-LRM

7.2.1

N/S

N/S

7.2.1

7.2.1

N/S

7.3.3

SFP-10G-ZR

7.3.4

N/S

7.3.4.R02

7.3.4

7.3.4

N/S

7.3.4

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 2-36

Transceiver Compatibility Matrix

Transceiver

OmniSwitch 6900 Compatibility

OS6900X20/X40

OS6900-Q32

OS6900-X72

XNI-U4/U12

HNI-U6

QNI-U3

XNI-U12E

SFP-10G-C

7.2.1

N/S

7.3.4.R02

7.2.1

7.2.1

N/S

7.3.3

SFP-10G24DWD80

7.3.1

N/S

7.3.4.R02

7.3.1

7.3.1

N/S

7.3.3

SFP-10G-GIG-SR

7.3.1

N/S

7.3.4.R02

7.3.1

7.3.1

N/S

7.3.3

N/S

N/S

7.3.3

SFP-10G-GIG-LR

Not Supported

SFP-FC-SR

N/S

N/S

N/S

N/S

QSFP-40G-SR

N/S

7.3.4

7.3.4.R02

N/S

7.2.1.R02 7.2.1.R02

N/S

QSFP-40G-LR

N/S

7.3.4

7.3.4.R02

N/S

7.3.1.R01 7.3.1.R01

N/S

QSFP-40G-C

N/S

7.3.4

7.3.4.R02

N/S

7.2.1.R02 7.2.1.R02

N/S

QSFP-4X10G-SR

N/S

7.3.4

7.3.4.R02

N/S

N/S

N/S

N/S

QSFP-4X10G-C

N/S

7.3.4

7.3.4.R02

N/S

N/S

N/S

N/S

QSFP-40G-AOC20M

N/S

1. Only supports 1G.

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 2-37

Transceiver Compatibility Matrix

OmniSwitch 6860 Compatibility

OmniSwitch 6860 Compatibility
The following table shows the available transceivers and minimum release required for support:
Transceiver

OS6860/6860E

OS6860E-U28

(Excluding U28)

SFP-GIG-SX

8.1.1

8.1.1

SFP-GIG-LX

8.1.1

8.1.1

SFP-GIG-LH40

8.1.1

8.1.1

SFP-GIG-LH70

8.1.1

8.1.1

SFP-GIG-CWD

8.1.1

8.1.1

SFP-GIG-T

8.1.1

8.1.1

SFP-GIG-EXTND

8.1.1

8.1.1

SFP-GIG-BX-D

8.1.1

8.1.1

SFP-GIG-BX-U

8.1.1

8.1.1

SFP-GIG-BX-D20

8.1.1

8.1.1

SFP-GIG-BX-U20

8.1.1

8.1.1

SFP-GIG-BX-D40

8.1.1

8.1.1

SFP-GIG-BX-U40

8.1.1

8.1.1

1

SFP-DUAL-MM 2

N/S

8.1.1

SFP-DUAL-SM10

2

N/S

8.1.1

SFP-DUAL-BX-D

2

N/S

8.1.1

SFP-DUAL-BX-U

2

N/S

8.1.1

SFP-100-BX20LT

N/S

N/S

SFP-100-BX20NU

N/S

N/S

SFP-100-BXLC-D 2

N/S

8.1.1

SFP-100-BXLC-U 2

N/S

8.1.1

2

SFP-100-LC-MM

N/S

8.1.1

SFP-100-LC-SM15 2

N/S

8.1.1

SFP-100-LC-SM40 2

N/S

8.1.1

SFP-10G-SR

8.1.1

8.1.1

SFP-10G-LR

8.1.1

8.1.1

SFP-10G-ER

8.1.1

8.1.1

SFP-10G-LRM

8.1.1

8.1.1

SFP-10G-ZR

8.2.1

8.2.1

SFP-10G-C

8.1.1

8.1.1

SFP-10G-24DWD80

N/S

N/S

SFP-10G-GIG-SR3

8.1.1

8.1.1

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 2-38

Transceiver Compatibility Matrix

Transceiver

OmniSwitch 6860 Compatibility

OS6860/6860E

OS6860E-U28

(Excluding U28)
3

SFP-10G-GIG-LR

8.2.1

8.2.1

SFP-FC-SR

N/S

N/S

QSFP-40G-SR4

8.1.1

8.1.1

QSFP-40G-LR

N/S

N/S

QSFP-40G-C

N/S

N/S

QSFP-4X10G-SR

N/S

N/S

QSFP-4X10G-C

N/S

N/S

QSFP-40G-AOC20M

8.2.1

8.2.1

OS6860-CBL-1004

8.1.1

8.1.1

OS6860-CBL-3004

8.1.1

8.1.1

OS6860-CBL-404

8.1.1

8.1.1

1. OS6860E-U28 user ports (1 - 28) support 10/100/1000. All 6860 uplink ports support 1Gbps only with
this transceiver. If manually setting the user port speed to 10M the transceiver must first be inserted before
setting the speed.
2. Supported on OS6860E-U28 1G SFP user ports (1 - 28) only.
3. Not supported on OS6860E-U28 1G SFP user ports (1-28).
4. Supported for 20-Gigabit VFL connections only.

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 2-39

Transceiver Compatibility Matrix

OmniSwitch 6865 Compatibility

OmniSwitch 6865 Compatibility
The following table shows the available transceivers and minimum release required for support:
Transceiver

OS6865-P16X

iSFP-GIG-SX

8.3.1

iSFP-GIG-LX

8.3.1

iSFP-GIG-LH40

8.3.1

iSFP-GIG-LH70

8.3.1

iSFP-GIG-T

8.3.1

iSFP-GIG-BX-D

8.3.1

iSFP-GIG-BX-U

8.3.1

iSFP-10G-SR

8.3.1

iSFP-10G-LR

8.3.1

iSFP-10G-ER

8.3.1

iSFP-10G-C

8.3.1

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 2-40

Transceiver Compatibility Matrix

OmniSwitch 9900 Compatibility

OmniSwitch 9900 Compatibility
The following table shows the available transceivers and minimum release required for support:
Transceiver

OS99-CMM

OS99-XNI-U48

SFP-GIG-SX

Not Supported

8.3.1

SFP-GIG-LX

Not Supported

8.3.1

SFP-GIG-LH40

Not Supported

8.3.1

SFP-GIG-LH70

Not Supported

8.3.1

SFP-GIG-CWD

Not Supported

Not Supported

SFP-GIG-T

Not Supported

8.3.11

SFP-GIG-EXTND

Not Supported

8.3.1

SFP-GIG-BX-D

Not Supported

8.3.1

SFP-GIG-BX-U

Not Supported

8.3.1

SFP-GIG-BX-D20

Not Supported

Not Supported

SFP-GIG-BX-U20

Not Supported

Not Supported

SFP-GIG-BX-D40

Not Supported

Not Supported

SFP-GIG-BX-U40

Not Supported

Not Supported

SFP-DUAL-MM

Not Supported

Not Supported

SFP-DUAL-SM10

Not Supported

Not Supported

SFP-DUAL-BX-D

Not Supported

Not Supported

SFP-DUAL-BX-U

Not Supported

Not Supported

SFP-100-BX20LT

Not Supported

Not Supported

SFP-100-BX20NU

Not Supported

Not Supported

SFP-100-BXLC-D

Not Supported

Not Supported

SFP-100-BXLC-U

Not Supported

Not Supported

SFP-100-LC-MM

Not Supported

Not Supported

SFP-100-LC-SM15

Not Supported

Not Supported

SFP-100-LC-SM40

Not Supported

Not Supported

SFP-10G-SR

Not Supported

8.3.1

SFP-10G-LR

Not Supported

8.3.1

SFP-10G-ER

Not Supported

8.3.1

SFP-10G-LRM

Not Supported

8.3.1

SFP-10G-ZR

Not Supported

8.3.1

SFP-10G-C

Not Supported

8.3.1

SFP-10G-24DWD80

Not Supported

8.3.1

SFP-10G-GIG-SR

Not Supported

8.3.1

SFP-10G-GIG-LR

Not Supported

8.3.1

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 2-41

Transceiver Compatibility Matrix

Transceiver

OmniSwitch 9900 Compatibility

OS99-CMM

OS99-XNI-U48

SFP-FC-SR

Not Supported

Not Supported

QSFP-40G-SR

Not Supported

Not Supported

QSFP-40G-LR

Not Supported

Not Supported

QSFP-40G-C

Not Supported

Not Supported

QSFP-4X10G-SR

Not Supported

Not Supported

QSFP-4X10G-C

Not Supported

Not Supported

QSFP-40G-AOC20M

Not Supported

Not Supported

1. Only supports 1G.

OmniSwitch AOS Release 8 Transceivers Guide

September 2016

page 2-42



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Alcatel-Lucent Enterprise
Create Date                     : 2016:09:09 17:34:06Z
Keywords                        : OmniSwitch, Transceivers, Transceiver, User Guide, User Manual, SFP, SFP+, QSFP, QSFP+, Compatibility Matrix
Modify Date                     : 2016:09:20 17:30:14-07:00
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : FrameMaker 11.0
Metadata Date                   : 2016:09:20 17:30:14-07:00
Format                          : application/pdf
Title                           : OmniSwitch AOS Release 8 Transceivers Guide
Creator                         : Alcatel-Lucent Enterprise
Description                     : This user guide contains transceiver specifications and compatibility.
Subject                         : OmniSwitch, Transceivers, Transceiver, User Guide, User Manual, SFP, SFP+, QSFP, QSFP+, Compatibility Matrix
Document ID                     : uuid:3fd74685-f967-43cf-9968-12de9be076fb
Instance ID                     : uuid:ed40d0c3-7883-44a9-b22b-7ceb52355ae4
Page Mode                       : UseOutlines
Page Count                      : 52
EXIF Metadata provided by EXIF.tools

Navigation menu