P2 550

User Manual: p2-550 Productivity2000 User Manual and Inserts

Open the PDF directly: View PDF PDF.
Page Count: 8

DownloadP2-550
Open PDF In BrowserView PDF
CPU Specifications
User Memory
Memory Type
Retentive Memory

50MB (Includes program, data and documentation)
Flash and Battery Backed RAM
500kB

Scan Time

500µs (3K Boolean, 240 I/O)

Display

OLED, 4x10 characters, 8 control buttons;
OLED characters are 5x7 with a dot pitch of 0.45 mm;
2.25 mm x 3.15 mm

Communications;
5 Integrated Ports

USB IN: Programming, Monitoring, Debug, Firmware
ETHERNET: (10/100Mbps Ethernet) Programming,
Monitoring, Debug, Firmware, Email SMTP Client,
Modbus TCP Client (32 Servers) and Server (16 Clients),
EtherNet/IP Scanner (32 Adapters) and Adapter
(4 scanners) with 8 connections per device.
REMOTE I/O: 16 GS-EDRV100 (GS Drives),
8 Remote Base Groups
RS-232: (RJ12, 1200-115.2k Baud) ASCII, Modbus
RS-485: Removable Terminal Included, (1200-115.2k
Baud) ASCII, Modbus RTU.

Data Logging/Project
Transfer

Micro SD card slot

Hardware Limits
of System

9 Base Groups: 1 Local (P2-550) + 8 Remote (P2-RS)
4,320 Hardware I/O points (All 32 point modules)
16 GS Series Drives as Remote I/O

Instruction Types

Application Functions
Array Functions
Counters/Timers
Communications
Data Handling
Drum Sequencers
Math Functions

Real Time Clock
Accuracy

±5s per day typical at 25°C
±15s per day maximum at 60°C

Document Name
P2-550-DS

PID
Program Control
String Functions
System Functions
Contacts
Coils

Edition/Revision
1st Ed. Rev B

Date
3/29/2017

Copyright 2016, AutomationDirect.com Incorporated/All Rights Reserved Worldwide.

Sales 800-633-0405

2000

P2-550 CPU

The P2-550 is a full-featured,
high-performance CPU for use
with the Productivity2000 system.
CPU Specifications ...................................1
CPU Front and Bottom Panels ..................2
CPU Installation Procedure........................2
Battery Installation Procedure....................3
Micro SD Specifications.............................3
RS-232 Port Specifications........................4
RS-485 Port Specifications........................4
Ethernet Port Specifications.......................5
Remote I/O Port Specifications..................5
USB In Port Specifications.........................5
Front Panel OLED Message Display.........6
Front Panel OLED Display Monitoring
and Configuration.......................................7
Warning......................................................8
CPU Status Indicators................................8
CPU Run/Stop Switch Specifications.........8
General Specifications...............................8
Hot Swap Information.................................8

Warranty: Thirty-day money-back guarantee. Two-year limited replacement.
(See www.productivity2000.com for details).

www.productivity2000.com

1

CPU Front and Bottom Panels

CPU Installation Procedure
Step One:

Unlock both locking tabs

CPU Status Indicators
10/100 MB
Ethernet Port
- Programming
- Online monitoring
- Email (SMTP client)
- EtherNet/IP Scanner
and Adapter
- Modbus TCP Client
and Server
Local Ethernet
Network
- GS Series drives
- 8 Remote Base
Groups

OLED
- 4 x 10 character
- 8 control buttons
- User defined messages
- User adjustable settings
- System errors /
information
Micro SD CARD
- Data Logger
- Project Transfer

Step Two:

Micro USB 2.0 (Type B)
- Programming
- Online monitoring

Seat CPU on support
platform and push
towards base until circuit
board is fully engaged
into connector

RS-232 Serial Port (RJ12)
- Modbus/ASCII
(master or slave)
peripheral device
RS-485 Serial Port
(TB Style)
- Modbus/ASCII
(master peripheral device
or multiple slave devices)
using the same protocol

Locked

Unlocked
Unlock
ked

Step Three:

Snap retaining tab into
the locked position.

2

www.productivity2000.com

Tech Support 770-844-4200

Battery Installation Procedure
Step One:

-

Press spring lock
and swing battery
compartment
away from
CPU.

Micro SD Specifications

+ Step Two:

Insert battery and
close compartment.

Take care to
insert battery
behind metal tab.

Port Name

MICRO SD

Description

Standard Micro SD socket for data logging or program
transfer

Maximum Card
Capacity

32GB
Mbps

Minimum

Typical

Read

14.3

14.4

14.6

Write

4.8

4.9

5.1

Port Status LED

Green LED is illuminated when card is inserted/
detected

1

8

Battery (Optional)
D2-BAT-1

Coin type, 3.0 V Lithium battery, 560mA, battery number CR2354

Maximum

Transfer Rate
(ADATA microSDHC
Class 4 memory card)

Pin
1
2
3
4
5
6
7
8

SD
DAT2
CD/DAT3
CMD
VDD
CLK
VSS
DAT0
DAT1

Note: Card not included with unit.

Note: Although not needed for program backup, an uninstalled battery is included
with the P2-550. Install this battery if you want the CPU to retain the Time and
Date along with any Tagname values that you have set up as retentive.

Sales 800-633-0405

www.productivity2000.com

3

Port Specifications

RS-232 Specifications

RS-485 Port Specifications

Port Name

Port Name

RS-485

Description

Non-isolated RS-485 port connects the CPU as a
Modbus/ASCII master or slave to a peripheral device.
Includes ESD/EFT protection and automatic echo
cancellation when transmitter is active

Data Rates

Selectable, 1200, 2400, 4800, 9600, 19200, 33600,
38400, 57600, and 115200

TXD+/RXD+

RS-485 transceiver high

TXD-/RXD-

RS-485 transceiver low

GND

Logic ground

Input Impedance

19kΩ

Maximum Load
Output Short Circuit
Protection
Electrostatic Discharge
Protection
Electrical Fast Transient
Protection
Minimum Differential
Output Voltage
Fail Safe Inputs
Maximum Common Mode
Voltage
Port Status LED

50 transceivers, 19 kΩ each, 60 Ω termination

+5V Cable Power
Source

RS-232
Non-isolated RS-232 DTE port connects the CPU as a
Modbus/ASCII master or slave to a peripheral device. Includes
ESD and built-in surge protection
Selectable,1200, 2400, 4800, 9600, 19200, 33600, 38400,
57600, and 115200
210 mA maximum at 5V, ± 5%. Reverse polarity and
overload protected

TXD

RS-232 Transmit output

RXD

RS-232 Receive input

RTS

Handshaking output for modem control

GND
Maximum Output
Load (TXD/RTS)
Minimum Output
Voltage Swing
Output Short
Circuit Protection
Port Status LED

Logic ground

Description
Data Rates

Cable Options

3kΩ, 1000 pf
±5V
±15mA
Green LED is illuminated when active for TXD, RXD and RTS
EA-MG-PGM-CBL
D2-DSCBL
USB-RS232 with D2-DSCBL
FA-CABKIT
FA-ISOCON for converting RS-232 to isolated RS-485

Pin #

6
1
6-pin RJ12 Female
Modular Connector

4

Signal

6

GND

Logic Ground

5

RTS

RS-232 Output

4

TXD

RS-232 Output

3

RXD

RS-232 Input

2

+5V

210mA Maximum

1

GND

Logic Ground

www.productivity2000.com

Cable Options

±250mA, thermal shut-down protection
±8KV per IEC1000-4-2
±2KV per IEC1000-4-4
1.5 V with 60Ω load
Logic high input state if inputs are unconnected
-7.5 V to 12.5
Green LED illuminated when active for TXD and RXD
Recommend L19827-XXX from AutomationDirect.com

Removable connector included.
Spare connectors available
(part no. P3-RS485CON).

Pin #

Signal

G

GND

–

TXD-/RXD-

+

TXD+/RXD+

Tech Support 770-844-4200

Port Specifications
Ethernet Specifications
Port Name ETHERNET

REMOTE I/O

Standard transformer isolated
Ethernet port with built-in surge
protection for programming,
Description online monitoring, Email (SMTP
client), Modbus/TCP client/server
connections (fixed IP or DHCP)
and Ethernet/IP Scanner/
Apapter connections.

Standard transformer isolated
Ethernet port with built-in surge
protection for connection to 16
GS Series Drives and 8 Remote
Base Groups.

Transfer
Rate

Port Name

Port Status LED is solid when network LINK is established. LED flashes when
LED
port is active (ACT).

Crossover Cable
OR/WHT
OR
GRN/WHT
BLU
BLU/WHT
GRN
BRN/WHT
BRN

GRN
OR/WHT
BLU
BLU/WHT
OR
BRN/WHT
BRN

Patch (Straight-through) Cable

TD+ 1
TD– 2
RD+ 3
4
5
RD– 6
7
8
RJ45

OR
GRN/WHT
BLU
BLU/WHT
GRN
BRN/WHT
BRN

Standard Micro USB Slave input for programming and
online monitoring, with built-in surge protection. Not
compatible with older full speed USB devices.
480Mbps

Description
Transfer Rate

Green LED is illuminated when LINK is established to
programming software.
USB Type A to Micro USB Type B:

Cables

6ft. cable part # USB-CBL-AMICB6
15ft. cable part # USB-CBL-AMICB15

10/BASE-T/100BASE-TX

GRN/WHT

RJ45

OR/WHT

MICRO USB

Port Status LED

10 Mbps (Orange LED) and 100 Mbps (Green LED) (auto-crossover)

TD+ 1
TD– 2
RD+ 3
4
5
RD– 6
7
8

Micro USB Type B Slave Input
Specifications

OR/WHT
OR
GRN/WHT
BLU
BLU/WHT
GRN
BRN/WHT
BRN

1
2
3
4
5
6
7
8

TD+
TD–
RD+
RD–

1

1 VBUS
2 D-

8

RJ45
1
2
3
4
5
6
7
8

3 D+
4 ID
5 GND

TD+
TD–
RD+
RD–

RJ45

12345678

8-pin RJ45 Connector
(8P8C)

Sales 800-633-0405

www.productivity2000.com

5

Front Panel OLED Message Display

The CPU incorporates a 4 line x 10 character OLED for
system errors and information or for displaying userdefined messages.
OLED characters are 7x12 with a dot pitch of 0.245 mm;
1.72 mm x 2.94 mm.
OLED control buttons located beneath the display allow
the user to navigate through a menu and arrow buttons
allow for configuration of time and date settings.
Note: There is a built in time-out for the OLED of 4 hours.
Only a button press or power up will turn it back on.

6

www.productivity2000.com

For user-defined messages, the display is configured
using the Productivity2000 Programming Software. An
OLED Page instruction allows the user to program text
into user-defined tags and display the messages based
on the ladder execution.

Tech Support 770-844-4200

Front Panel OLED Display Monitoring and Configuration
P2-550
MODE= RUN
12-18-13
11:28:02

MENU
>M1PACINFO
>M2SYS CFG
>M3MONITOR

>M4CALENDA
>M5ERRHIST
>M6PWR UP
>M7LCD SET

>M5ERRHIST
>M6PWR UP
>M7LCD SET
>M8uSD DRV

Automation
Direct.com
8006330405
Boot Up

M1:PACINFO
TYPE
P3-550
MODE=STOP

M1:FIRMREV
LCD: 1.4
CPU:
1.0.5.15

M1:LADDER
MEMORY


Press SEL
button to select
a menu option.

M2:SYS CFG
GRP: 00
BASE: 01
SLOT: 01




Hold MENU button to display menu options.
Use down arrow key to scroll through options.

M1:IP ADR
###.###.##
#.###

50% USED

M1:MAC ADR
##:##:##:
##:##:##

Steps For Using Monitor Menu
Step 1.) Select User Data or I/O Data and
press ENT
Step 2.) Select Data Type and Press ENT
Step 3.) Press ENT to Edit System ID, or when
finished press ENT
Step 4.) Press SEL to monitor the value

M3:MONITOR
>USER DATA
>I/O DATA

C
SBR
SBRW

Data Type Monitor
BCD16 SWRW
STR
S32
SSTR
US16
BCD32
DI
S16
F32
DO
SWR

AIS32
AOS32
AIF32
AOF32



M4:DATE
M4:DATE
>CHG DATE
MM-DD-YY
>CHG TIME
07-26-06
>CHGFORMAT
M5:ERRHIST
E00:E08002
E01:E08002
M6:PWR UP
MONITOR

M4:TIME
HH:MM:SS
14:34:46

M4:FORMAT
>DATE
>TIME

E01 :E08002
25JUL06
1 5:45:30
ib file
M6:PWR UP
KEY TEST
>BEEP

M7:KEYTEST
INPUT:
DOWN

M7:BEEP
-LOW -OFF
-MED
-HIGH

M8:uSD DRV
>SAVE->PEN
>LOAD->PAC
>REMOVE

M8:uSD DRV
WRITE PEN
PROGRESS:
ERR
-1

M8:uSD DRV
SAVE
COMPLETE
PRESS ESC

Sales 800-633-0405

TIMEFORMAT
*HH-MM:SS
HH-MM US
HH-MM AS

M8:uSD DRV
SWITCH CPU
TO STOP OR
PRESS ESC

M8:uSD DRV
WRITE PAC
PROGRESS:
ERR -3003

Access the OLED menu
Returns to the previous screen
Selects the desired menu option
Starts the selected process
Moves the cursor around the
4 Row x 10 Column OLED

M8:uSD DRV
LOAD PAC
COMPLETE

www.productivity2000.com

M8:uSD DRV
REMOVE
PEN DRIVE
NOW

7

WARNING: To minimize the risk of potential safety problems, you should follow all
applicable local and national codes that regulate the installation and operation of
your equipment. These codes vary from area to area and it is your responsibility to
determine which codes should be followed, and to verify that the equipment, installation, and operation are in compliance with the latest revision of these codes.
Equipment damage or serious injury to personnel can result from the
failure to follow all applicable codes and standards. We do not guarantee
the products described in this publication are suitable for your particular
application, nor do we assume any responsibility for your product design,
installation, or operation.
If you have any questions concerning the installation or operation of this
equipment, or if you need additional information, please call Technical Support at
770-844-4200.
This publication is based on information that was available at the time it was
printed. At AutomationDirect.com® we constantly strive to improve our products
and services, so we reserve the right to make changes to the products and/or publications at any time without notice and without any obligation. This publication may
also discuss features that may not be available in certain revisions of the product.

General Specifications

CPU Status Indicators
PWR

Green LED is illuminated when power is ON

RUN

Green LED is illuminated when CPU is in
RUN mode

CPU

Red LED is illuminated during power ON
reset, power down, or watch-dog time-out.

Removable Terminal Block Specifications
Part Number

P3-RS485CON

Number of Positions

3 Screw Terminals

Pitch

5mm
28-12 AWG Solid Conductor
30-12 AWG Stranded Conductor

Wire Range

8

Screw Driver Width

1/8 inch (3.175 mm) Maximum

Screw Size

M2.5

Screw Torque

4.5 lb·in (0.51 N·m)

www.productivity2000.com

Operating Temperature

0° to 60°C (32° to 140°F)

Storage Temperature

-20° to 70°C (-4° to 158°F)

Humidity

5 to 95% (non-condensing)

Environmental Air

No corrosive gases permitted

Vibration

IEC60068-2-6 (Test Fc)

Shock

IEC60068-2-27 (Test Ea)

Heat Dissipation

3.81 W

Enclosure Type

Open Equipment

Agency Approvals

UL508 file E139594, Canada & USA
CE (EN61131-2*)

Module Location

Controller slot in the local base in a
Productivity2000 System

EU Directive

See the “EU Directive” topic in the Productivity
Suite Help File. Information can also be obtained
at: www.productivity2000.com

Weight

158g (5.6 oz)

*Meets EMC and Safety requirements. See the D.O.C. for details.

IMPORTANT!

Hot-Swapping Information
Note: This device cannot be Hot Swapped.

CPU Run/Stop Switch Specifications
RUN position

Executes user program, run-time edits possible

STOP position

Does not execute user program, normal program load
position

Tech Support 770-844-4200



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Create Date                     : 2017:03:29 13:14:09-04:00
Metadata Date                   : 2017:03:29 13:14:49-04:00
Modify Date                     : 2017:03:29 13:14:49-04:00
Creator Tool                    : Adobe InDesign CC 2017 (Windows)
Instance ID                     : uuid:49d178f6-9db0-452e-92df-7c0e801e893f
Original Document ID            : xmp.did:C1A4B86578EDE311AD9E8A5FA38FC23B
Document ID                     : xmp.id:ef7eb192-bbe1-f441-b8f0-ca37044c303c
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:7dc487ba-44a7-5e40-9db6-a67d7eb2c183
Derived From Document ID        : xmp.did:e9699c58-6da9-c243-812d-d6f4c9c0b4dd
Derived From Original Document ID: xmp.did:C1A4B86578EDE311AD9E8A5FA38FC23B
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Windows)
History Changed                 : /
History When                    : 2017:03:29 13:14:09-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 8
Creator                         : Adobe InDesign CC 2017 (Windows)
EXIF Metadata provided by EXIF.tools

Navigation menu