GM Service Manuals DC98 Paintspec
User Manual: DC98
Open the PDF directly: View PDF 
.
Page Count: 46
| Download | |
| Open PDF In Browser | View PDF |
2k4PaintCov.ai 9/05/03 4 color process GM Approved Refinish Materials GM4901M-D-2004 OCTOBER 2003 GENERAL MOTORS CORPORATION PRINTED IN USA 2004 GM Approved Refinish Materials Foreword The products listed in this booklet have been approved by GM following a thorough, standardized test process to meet the GM4901M Specification. Only the products listed, and their support products (i.e., reducers) can be used for GM warranty work. This booklet supersedes previous publications. Primers, surfacers, sealers, basecoats and clearcoats approved to meet this specification create a complete ″SYSTEM″ and are not interchangeable. Mixing products from different manufacturer-approved lines or the use of any generic substitutions is strictly forbidden. Unapproved substitution will result in voiding the manufacturers’ warranty and a loss of GM-approved payments (chargebacks) for warranty work. This booklet contains product information based on the latest data available at the time of publication approval. The right is reserved to make product or publication changes at any time, without notice. This booklet, or any portions thereof, may not be reproduced without the written consent of General Motors Corporation. Published by North American Operations, General Motors Corporation, Warren, Michigan 48090-9003 © 2003 General Motors Corporation. All rights reserved. All brands and product names are registered trademarks of their respective owners. Information cutoff date 9-18-03. PRINTED IN U.S.A. i Table Of Contents 1. Introduction ..............................................................................1-1 The Bottom Line .......................................................................1-1 2. Approved Paint Systems ..........................................................2-1 Paint Manufacturers ............................................................... .. 2-1 Testing for the GM4901M Specification ...................................... ..2-1 System Categories ................................................................ .. 2-2 Akzo Nobel Coatings, Inc. ....................................................... .. 2-3 BASF .................................................................................. .. 2-6 DuPont .................................................................................2-12 Martin-Senour ..................................................................... .. 2-16 Nexa Autocolor ................................................................... .. 2-19 PPG .....................................................................................2-24 Sherwin-Williams ................................................................. .. 2-31 Standox ............................................................................. .. 2-34 Spies Hecker ...................................................................... .. 2-37 Contacts For further information on paint suppliers, go to the following web sites: Akzo Nobel Coatings ....................... www.akzonobelcarrefinishes.net BASF ................................................................. www.basfrefinish.com DuPont ............ ............ ............ Performance Coatings DuPont ............................................ www.dupontfinishes.com Standox, Inc. ......................................... www.standoxna.com Spies Hecker, Inc. ........................ www.spiesheckerusa.com PPG ............ Nexa Autocolor ................................. www.nexaautocolor.com ............ PPG ....................................................... www.ppgrefinish.com Sherwin Williams ............ Martin Senour .................... www.martinsenour-autopaint.com ............ Sherwin Williams ..................... www.sherwin-automotive.com ii 1. Introduction General Motors continuously pursues quality improvement. Therefore GM has established automotive refinishing standards for itself as well as its Marketing Division Dealers and Retailers. GM was the first domestic car company to set a specification for aftermarket paint finishes. GM has established standards for paint refinishing. Each Division requires the Dealer to use only materials and methods that meet GM Standard GM4901M when repairing, replacing, or refinishing vehicles. Where it is determined that the Dealer is using paint systems or materials which do not meet GM4901M standards, appropriate counsel and/or corrective action may be taken. The Bottom Line The Dealer or Retailer must ensure that all finish repairs, including sublets, meet GM Specification GM4901M. Use of materials (and associated methods) that do not meet this GM standard may result in a review of claim(s) leading to chargeback(s). As warranty periods increase, customer expectations continue to rise. Many Dealers/Retailers understand customer expectations. As a result, they have chosen a single, complete system approach and only use the systems that meet the highest standards of quality and durability. All the paint manufacturers that meet the GM4901M Specification have spent thousands of manhours in research and development to ensure the approved system gives the appearance, performance, and durability comparable to the OEM finish. The products in the systems listed in this book are the very best products to use. They are guaranteed to produce the consistent, quality results that GM customers expect. This makes it easier for you, as the Dealer/Retailer, to confidently choose a system that will maximize your customers’ satisfaction. Each year, all new paint systems will be tested and evaluated. New or improved products will also be tested. The paint systems that pass this annual testing process will be published in this booklet, updated annually. 1-1 1. Introduction The National Rule was implemented in January 1999. You are required to use only VOC systems listed in this book for business in the United States. Some non-VOC systems that meet GM4901M Specifications are still approved for Canada. Check with your paint supplier to see if a listed non-VOC system is one of those. If additional booklets are needed, contact your paint manufacturer’s representative. A down-loadable PDF of this booklet is also available at the GM web site address: www.gmgoodwrench.com 1-2 2. Approved Paint Systems Paint Manufacturers The Manufacturers and their Paint Refinish Systems that have passed the GM4091M Specification are: Akzo Nobel Coatings, Inc. BASF DuPont Martin-Senour Nexa Autocolor PPG Sherwin-Williams Standox Spies Hecker Testing for the GM4901M Specification To meet this specification, each manufacturer has conducted the following tests for their paint refinish systems: • Tukon Hardness - point of hardness of paint film after cure • Humidity Adhesion - durability of paint films exposed to rain and damp weather conditions • Chip Resistance - resistance of paint films to stone chipping and or small mars caused by road dirt/gravel • Cycle Test - durability of paint films going from cold-to-hot-to-cold or hot-to-cold-to-hot conditions • Gas Resistance - resistance of paint to staining or softening when exposed to gasoline • Chemical Resistance - resistance to environmental chemicals/ products • Weather Resistance - overall long-term durability of the paint system as related to cracking, crazing, fading, hazing, fogging or any other customer dissatisfaction issues 2-1 2. Approved Paint Systems System Categories ″Rules″ involving refinishing products in the United States have been established. The products in this booklet are grouped as systems. All systems are listed once, whether they are Non-VOC Regulated or VOC Regulated. VOC Regulated systems that meet the National Rule are indicated by one bullet (•) to the right of the Clearcoat. If the system meets National Rule and Rule 45, it has two bullets (••). Three bullets (•••) means the system meets National Rule, Rule 45, and Rule 1151. Approved Non-VOC systems, indicated by four stars (****), can still be used in Canada. Only products meeting the National Rule or stricter standards may be manufactured for use in the United States. A brief explanation of each of the rules follows: National Rule: Establishes the pounds-per-gallon limits for Volatile Organic Compound (VOC) emissions, that are released into the atmosphere during several steps of the refinishing process. The regulation focuses on paint manufacturers by prohibiting the production of noncompliant materials. State and local regulations will take precedence if they are more strict. The National Rule takes effect in non-regulated states and in those states with less restrictive regulations. Rule 45: Bay Area Air Quality Management District (B.A.A.Q.M.D.) concerns VOC emissions in the San Francisco Bay area. It is stricter than the National Rule. Rule 1151: South Coast Air Quality Management District (S.C.A.Q.M.D.) concerns VOC emissions for Los Angeles. It is the most strict for VOC emissions of the VOC regulated products. Check with your paint supplier to see if the system you are using meets the VOC requirement of your area. There may be more than one paint system in a manufacturer’s line that has met the GM4901M Specification. Each system listed is complete, as tested, and no substitution, even of a similar product in another system, is acceptable. The manufacturers and their GM approved systems are laid out on the following pages for your ease of reference. 2-2 2. Approved Paint Systems Akzo Nobel Coatings, Inc. Rigid Substrates* (Steel and Aluminum) Clearcoat • Autoclear II OE Basecoat Autobase Surfacer Colorbuild Anti-Corrosion Primer # Washprimer CR * See Akzo Nobel OE Warranty Technical Manual for all mixing and use instructions. To meet GM4901M Specifications a hardener must be used in the basecoat. # Primer can be used direct to aluminum. • VOC Regulated - National Rule 2-3 2. Approved Paint Systems Akzo Nobel Coatings, Inc. – Rigid Substrates* (Steel and Aluminum) (Cont’d) Clearcoat Autoclear III Basecoat Autobase Plus Surfacer Colorbuild Anti-Corrosion Primer # Washprimer CR Clearcoat •• Autocoat ll LV Basecoat Autobase Surfacer Colorbuild 2.1-2.8 Anti-Corrosion Primer # Washprimer CR Clearcoat ••• Autoclear II LV Basecoat Autobase Surfacer Colorbuild 2.1-2.8 Anti-Corrosion Primer # Washprimer EMCF Clearcoat ••• Autoclear ll LV Basecoat Autobase Plus Surfacer Colorbuild 2.1-2.8 Anti-Corrosion Primer # Washprimer EMCF * See Akzo Nobel OE Warranty Technical Manual for all mixing and use instructions. To meet GM4901M Specifications a hardener must be used in the basecoat. # Primer can be used direct to aluminum. •• VOC Regulated - National Rule and Rule 45 ••• VOC Regulated - National Rule, Rule 45 and Rule 1151 2-4 2. Approved Paint Systems Akzo Nobel Coatings, Inc. – Flexible Substrates* Clearcoat • Autoclear II OE Basecoat Autobase Surfacer Colorbuild Adhesion Primer Primer PO Clearcoat • Autoclear III Basecoat Autobase Plus Surfacer Colorbuild Adhesion Primer Primer PO Clearcoat ••• Autoclear II LV Basecoat Autobase Surfacer Colorbuild 2.1-2.8 Adhesion Primer Primer PO Clearcoat ••• Autocoat ll LV Basecoat Autobase Plus Surfacer Colorbuild 2.1-2.8 Adhesion Primer Primer PO * See Akzo Nobel OE Warranty Technical Manual for all mixing and use instructions. To meet GM4901M Specifications a hardener must be used in the basecoat. • VOC Regulated - National Rule ••• VOC Regulated - National Rule, Rule 45 and Rule 1151 2-5 2. Approved Paint Systems BASF Rigid Substrates (Steel and Aluminum) R-M Systems Clearcoat • DC92 Low VOC Clear DC5100 CTR Clear DC5300 CTR Baking Clear Basecoat DIAMONT Basecoat Primer DP20 Diamond Primer # DS30 Diamond Transparent Sealer # DP26 Power Fill 2K Primer Anti-Corrosion Primer DE15 Epoxy Primer Surfacer DE40 Epoxy Primer Surfacer • VOC Regulated - National Rule # These primers can be used direct to aluminum using appropriate special hardeners. To meet GM4901M Specifications a hardener must be used in the basecoat. 2-6 2. Approved Paint Systems BASF – Rigid Substrates (Steel and Aluminum) R-M Systems (Cont’d) Clearcoat • DC92 Low VOC Clear DC5100 CTR Clear DC5300 CTR Baking Clear Basecoat DIAMONT Basecoat Primer DP21 2K Tintable Urethane Sealer # Anti-Corrosion Primer DE17 Clearcoat • DC92 Low VOC Clear DC5100 CTR Clear DC5300 CTR Baking Clear Basecoat DIAMONT Basecoat Primer NP80 High-Build Primer (non-iso) Anti-Corrosion Primer EP689 Epoxy Primer Clearcoat •• DC95 3.5 VOC Urethane Clear DC98 Low VOC Clear DC5300 CTR Baking Clear Basecoat DIAMONT Basecoat Primer DP200 Low VOC Primer # Anti-Corrosion Primer DE15 Epoxy Primer Surfacer DE17 Diamond Etching Primer # Clearcoat •• DC98 Low VOC (2.0) Clear DC95 3.5 VOC Urethane Clear Basecoat DIAMONT Basecoat Primer – Anti-Corrosion Primer EP359 Low VOC Epoxy Primer • VOC Regulated - National Rule •• VOC Regulated - National Rule and Rule 45 # These primers can be used direct to aluminum using appropriate special hardeners. To meet GM4901M Specifications a hardener must be used in the basecoat. 2-7 2. Approved Paint Systems BASF – Rigid Substrates (Steel and Aluminum) R-M Systems (Cont’d) Clearcoat ••• DC98 Low VOC (2.0) Clear Basecoat DIAMONT Basecoat Primer – Anti-Corrosion Primer DP210 Low VOC Primer # Clearcoat ••• DC98 Low VOC (2.0) Clear Basecoat DIAMONT Basecoat Primer DP200 Low VOC Primer Anti-Corrosion Primer DE17 Diamond Etching Primer # ••• VOC Regulated and Rule 45 and Rule 1151 # These primers can be used direct to aluminum using appropriate special hardeners. To meet GM4901M Specifications a hardener must be used in the basecoat. 2-8 2. Approved Paint Systems BASF – Rigid Substrates (Steel and Aluminum) Glasurit Systems Clearcoat • 923-94 HS Clear 923-550 Fast Urethane Acrylic Clear 923-450 Multi Temp Baking Urethane Acrylic Clear 923-155 Urethane Acrylic Clear 923-109 HS UV Klarlack (3.5 VOC) Basecoat Line 55 Basecoat Primer 285-50 HS Primer # 285-60 Universal HS Primer # 285-0 2K Transparent Filler # Anti-Corrosion Primer 801-1552 Epoxy Primer Filler EP (Chromate Free) Clearcoat •• 923-355 HS Urethane Clear 923-200 Ultra Low VOC Clear 923-109 HS UV Klarlack (3.5 VOC) Basecoat Line 55 Basecoat Primer 285-21 2.1 VOC Primer # Anti-Corrosion Primer 801-1552 Epoxy Primer Filler EP (Chromate Free) 283-155 Etching Primer # • VOC Regulated - National Rule •• VOC Regulated - National Rule and Rule 45 # These primers can be used direct to aluminum using appropriate special hardeners. To meet GM4901M Specifications a hardener must be used in the basecoat. 2-9 2. Approved Paint Systems BASF – Rigid Substrates (Steel and Aluminum) Glasurit Systems (Cont’d) Clearcoat •• 923-355 HS Urethane Clear 923-109 HS UV Klarlack (3.5 VOC) Basecoat Line 90 Waterborne Basecoat Primer 285-21 2.1 VOC Primer # Anti-Corrosion Primer 801-1552 Epoxy Primer Filler EP (Chromate Free) 283-155 Etching Primer # Clearcoat ••• 923-355 HS Urethane Clear 923-109 HS UV Klarlack (3.5 VOC) Basecoat Line 90 Waterborne Basecoat Primer 285-21 2.1 VOC Primer # (Do not use over 70-2) Anti-Corrosion Primer 70-2 2K Waterborne Primer 283-155 Etching Primer # Clearcoat ••• 923-200 Ultra Low VOC Clear Basecoat Line 55 Basecoat Primer 285-21 2.1 VOC Primer # Anti-Corrosion Primer 283-155 Etching Primer •• VOC Regulated - National Rule and Rule 45 ••• VOC Regulated and Rule 45 and Rule 1151 # These primers can be used direct to aluminum using appropriate special hardeners. To meet GM4901M Specifications a hardener must be used in the basecoat. 2-10 2. Approved Paint Systems BASF – Flexible Substrates R-M Systems Clearcoat DC92 Low VOC Clear w/flexibilizing agent DC98 Low VOC (2.0) Clear w/flexiblizing agent Basecoat DIAMONT Basecoat Primer DP21 2K Urethane Sealer w/flexiblizing agent Adhesion Promoter 865 Plastic Adhesion Promoter Glasurit Systems Clearcoat 923-450 Urethane Clear w/flexiblizing agent 923-109 HS UV Klarlack Basecoat Line 55 Basecoat Primer 285-60 Universal HS Primer/Sealer w/flexiblizing agent Adhesion Promoter 934-0 1K Plastic Adhesion Primer Clearcoat 923-109 HS UV Klarlack Basecoat Line 90 Basecoat Primer 285-60 Universal HS Primer/Sealer w/flexiblizing agent Adhesion Promoter 934-0 1K Plastic Adhesion Primer To meet GM4901M Specifications a hardener must be used in the basecoat. 2-11 2. Approved Paint Systems DuPont Rigid Substrates (Steel and Aluminum) Clearcoat • 72400S ChromaPremier™ Appearance Clear Basecoat * ChromaBase® BaseCoat Color ″K″ Suffix ChromaPremier™ BaseCoat Color ″F″ Suffix Primer 3240S 2K High Build Primer Anti-Corrosion Treatment # 22860S Vinyl Wash Primer * To meet GM4901M Specifications a hardener must be used in the basecoat. # These primers can be used direct to aluminum. • VOC Regulated - National Rule 2-12 2. Approved Paint Systems DuPont − Rigid Substrates (Steel and Aluminum) (Cont’d) Clearcoat • 72200S ChromaPremier™ Productive Clear 72400S ChromaPremier™ Appearance Clear Basecoat * ChromaPremier™ BaseCoat Color ″F″ Suffix Primer 424xxS ChromaPremier™ Sealer Anti-Corrosion Treatment 615S or 625S Variprime® Self-Etching Primer Clearcoat 72500S ChromaPremier™ Premium Appearance Clear plus 2350S Flex Additive (High Gloss, Non-Textured) 72500S ChromaPremier™ Premuim Appearance Clear plus 2350S Flex Additive plus 2380S Texture Additive (Textured) 72500S ChromaPremier™ Premuim Appearance Clear plus 2350S Flex Additive plus 2360S Matting Additive (Low Gloss, Non-Textured) Basecoat * ChromaPremier™ BaseCoat Color ″F″ Suffix Anti-Chip Primer 220S Stone Chip Primer Primer 1140S Uro-Primer plus 2350S Flex Additive Clearcoat •• 72400S ChromaPremier™ Appearance Clear Basecoat * ChromaPremier™ BaseCoat Color ″F″ Suffix Primer # 25xxS DuPont™ Epoxy DTM Primer/Sealer Clearcoat •• 72400S ChromaPremier™ Appearance Clear 3600S ChromaClear® Low VOC Productive Basecoat * ChromaPremier™ BaseCoat Color ″F″ Suffix Primer 3240S 2K High Build Primer * To meet GM4901M Specifications a hardener must be used in the basecoat. # These primers can be used direct to aluminum. • VOC Regulated - National Rule •• VOC Regulated - National Rule and Rule 45 2-13 2. Approved Paint Systems DuPont − Rigid Substrates (Steel and Aluminum) (Cont’d) Clearcoat •• 2100S ChromaClear® Multi Use G2-V4500S ChromaClear® Ultra Productive G2-V4700S ChromaClear® Ultra Productive (HyperCure Air Dry) Basecoat * ChromaBase® BaseCoat Color ″K″ Suffix ChromaPremier™ BaseCoat Color ″F″ Suffix Primer 3240S 2K High Build Primer Anti-Corrosion Treatment # 22860S Vinyl Wash Primer Clearcoat •• 2100S ChromaClear® Multi Use Basecoat * ChromaBase® BaseCoat Color ″K″ Suffix Primer # 25xxS DuPont™ Epoxy DTM Primer/Sealer Clearcoat ••• 2100S ChromaClear® Multi Use Basecoat * ChromaBase® BaseCoat Color ″K″ Suffix Primer 3240S 2K High Build Primer Clearcoat **** 7500S ChromaClear® 7000S ChromaClear® 8500S ChromaClear® Basecoat * ChromaBase® BaseCoat Color ″K″ Suffix Primer # 25xxS DuPont™ Epoxy DTM Primer/Sealer Clearcoat **** 72200S ChromaPremier™ Productive Clear 72400S ChromaPremier™ Appearance Clear Basecoat * ChromaPremier™ BaseCoat Color ″F″ Suffix Primer 424xxS ChromaPremier™ Sealer Anti-Corrosion Treatment # 810R or 820R Corlar® Wash Primer Filler * To meet GM4901M Specifications a hardener must be used in the basecoat. **** Non-VOC Regulated Systems - Canada # These primers can be used direct to aluminum. •• VOC Regulated - National Rule and Rule 45 ••• VOC Regulated - National Rule, Rule 45 and Rule 1151 2-14 2. Approved Paint Systems DuPont – Flexible Substrates Clearcoat • 72500S ChromaPremier™ Premium Appearance Clear plus 2350S Flex Additive (High Gloss, Non-Textured) 72500S ChromaPremier™ Premium Appearance Clear plus 2350S Flex Additive plus 2380S Texture Additive (Textured) 72500S ChromaPremier™ Premium Appearance Clear plus 2350S Flex Additive plus 2360S Matting Additive (Low Gloss, Non-Textured) Basecoat * ChromaPremier™ BaseCoat Color ″F″ Suffix Anti-Chip Primer 220S Stone Chip Primer Primer 1140S Uro-Primer plus 2350S Flex Additive Adhesion Promoter 2330S Plas-Stick™ Adhesion Promoter Clearcoat •• 72400S ChromaPremier™ Appearance Clear plus 2350S Flex Additive Basecoat * ChromaPremier™ BaseCoat Color ″F″ Suffix Sealer 2340S Plas-Stick™ Flexible Adhesion Sealer Adhesion Promoter 2322S Plas-Stick™ Adhesion Promoter Clearcoat **** 8500S ChromaClear® plus 2350S Flex Additive Basecoat * ChromaBase® BaseCoat Color ″K″ Suffix Sealer 2340S Plas-Stick™ Flexible Adhesion Sealer Adhesion Promoter 2322S Plas-Stick™ Adhesion Promoter Clearcoat **** 72400S ChromaPremier™ Appearance Clear plus 2350S Flex Additive Basecoat * ChromaPremier™ BaseCoat Color ″F″ Suffix Sealer 2340S Plas-Stick™ Flexible Adhesion Sealer Adhesion Promoter 2322S Plas-Stick™ Adhesion Promoter * To meet GM4901M Specifications a hardener must be used in the basecoat. **** Non-VOC Regulated Systems - Canada • VOC Regulated - National Rule •• VOC Regulated - National Rule and Rule 45 2-15 2. Approved Paint Systems Martin-Senour Rigid Substrates (Steel and Aluminum) Clearcoat • Basecoat * Sealer Surfacer Anti-Corrosion Primer # TC741 Tec/BASE® Performance Urethane Clearcoat TC730 Tec/BASE® Speed Clearcoat Tec/BASE® BaseCoat w / TH121, 122, 123, 124, 704, 8660, 8670 or 8876 TP520-526 Complete™ Sealer System 5100 2K Urethane Sealer Series TP520-526 Complete™ Primer System 5103 Tint/PRIME® Primer/Surfacer 8827 Vinyl Wash Etching Primer 8847 TRIO/Prime® Etching Filler TE500 TRIO/Prime® Lead & Chromate Free Etching Filler * To meet GM4901M Specifications, a hardener must be used in the Base Color. Add listed Hardeners at a ratio of 2 oz. to a ready-to-spray quart of Tec/BASE® Basecoat. # These primers can be applied direct to aluminum. • VOC Regulated - National Rule 2-16 2. Approved Paint Systems Martin-Senour − Rigid Substrates (Steel and Aluminum) (Cont’d) Clearcoat •• TC730 Tec/BASE® Speed Clearcoat 8955 Tec/BASE® 3.5 VOC HS Clearcoat Basecoat * Tec/BASE® BaseCoat w / TH121, 122, 123, 124, 704, 8660, 8670 or 8876 Sealer TP520-526 Complete™ Sealer System 5100 2K Urethane Sealer Series Surfacer TP520-526 Complete™ Primer System 5103 Tint/PRIME® Primer/Surfacer Anti-Corrosion Primer # 8827 Vinyl Wash Etching Primer 8847 TRIO/Prime® Etching Filler TE500 TRIO/Prime® Lead & Chromate Free Etching Filler Clearcoat ••• 8901V Tec/BASE® 2.1 VOC Clearcoat Basecoat * Tec/BASE® BaseCoat w / TH121, 122, 123, 124, 704, 8660, 8670 or 8876 Sealer Tec/SHADE™ 2.1 Sealer System Surfacer Tec/SHADE™ 2.1 Primer System Anti-Corrosion Primer # TE500 TRIO/Prime® Lead & Chromate Free Etching Filler * To meet GM4901M Specifications, a hardener must be used in the Base Color. Add listed Hardeners at a ratio of 2 oz. to a ready-to-spray quart of Tec/BASE® Basecoat. # These primers can be applied direct to aluminum. •• VOC Regulated - National Rule and Rule 45 ••• VOC Regulated - National Rule, Rule 45 and Rule 1151 2-17 2. Approved Paint Systems Martin-Senour – Flexible Substrates Clearcoat ••• TC741 Tec/BASE® Performance Urethane Clearcoat TC730 Tec/BASE® Speed Clearcoat 8955 Tec/BASE® 3.5 VOC HS Clearcoat 8901V Tec/BASE® 2.1 VOC Clearcoat Basecoat * Tec/BASE® BaseCoat w / TH121, 122, 123, 124, 704, 8660, 8670 or 8876 Sealer TP520-526 Complete™ Sealer System Tec/SHADE™ 2.1 Sealer System 5100 2K Urethane Sealer Series Surfacer TP520-526 Complete™ Primer System 5103 Tint/PRIME® Primer/Surfacer Tec/SHADE™ 2.1 Primer System Adhesion Promoter 6246 Plastic Adhesion Promoter Clear 6247 Plastic Adhesion Promoter Dk. Gray 5100 2K Ad Pro Series * To meet GM4901M Specifications, a hardener must be used in the Base Color. Add listed Hardeners at a ratio of 2 oz. to a ready-to-spray quart of Tec/BASE® Basecoat. ••• VOC Regulated - National Rule, Rule 45 and Rule 1151 2-18 2. Approved Paint Systems Nexa Autocolor Rigid Substrates (Steel and Aluminum) Clearcoat • P190-643 HS Clearcoat Basecoat * P422 line 2K Basecoat P965 line Aquabase Basecoat Sealer P565-357/358 Wet-on-Wet Sealer P565-3011/3015 Fast HS Wet-on-Wet Sealer Anti-Corrosion Primer # P565-713 Chromate-Free Etch Primer * To meet GM4901M Specifications, a hardener must be added to the basecoat. # The primers can be applied directly to aluminum. • VOC Regulated - National Rule 2-19 2. Approved Paint Systems Nexa Autocolor − Rigid Substrates (Steel and Aluminum) (Cont’d) Clearcoat • P190-643 HS Clearcoat Basecoat * P422 line 2K Basecoat P965 line Aquabase Basecoat Surfacer P565-693 Hi Dur Rapide P565-510/511 HS Primer Surfacer Anti-Corrosion Primer # P565-713 Chromate-Free Etch Primer Clearcoat • P190-643 HS Clearcoat Basecoat * P422 line 2K Basecoat P965 line Aquabase Basecoat Surfacer ** P110-5000 UV Speedprime Clearcoat •• P190-6530 HS Plus Clearcoat Basecoat * P422 line 2K Basecoat Sealer P565-3111/3115 HS Wet-on-Wet Sealer Anti-Corrosion Primer # P565-713 Chromate-Free Etch Primer Clearcoat •• P190-6530 HS Plus Clearcoat Basecoat * P422 line 2K Basecoat Surfacer P565-5201/5205 HS Plus Primer Surfacer Anti-Corrosion Primer # P565-713 Chromate-Free Etch Primer Clearcoat •• P190-6530 HS Plus Clearcoat Basecoat * P422 line 2K Basecoat Surfacer ** P110-5000 UV Speedprime * To meet GM4901M Specifications, a hardener must be added to the basecoat. ** Spot repair only. # The primers can be applied directly to aluminum. • VOC Regulated - National Rule •• VOC Regulated - National Rule and Rule 45 2-20 2. Approved Paint Systems Nexa Autocolor – Rigid Substrates (Steel and Aluminum) (Cont’d) Clearcoat ••• P190-6730 HS Plus Clearcoat Basecoat * P422 line 2K Basecoat Sealer P565-3111/3115 HS Wet-on-Wet Sealer Anti-Corrosion Primer # P565-713 Chromate-Free Etch Primer Clearcoat ••• P190-6730 HS Plus Clearcoat Basecoat * P422 line 2K Basecoat Surfacer P565-5201/5205 HS Plus Primer Surfacer Anti-Corrosion Primer # P565-713 Chromate-Free Etch Primer Clearcoat ••• P190-6730 HS Plus Clearcoat Basecoat * P422 line 2K Basecoat Surfacer ** P110-5000 UV Speedprime * To meet GM4901M Specifications, a hardener must be added to the basecoat. ** Spot repair only. # The primers can be applied directly to aluminum. ••• VOC Regulated - National Rule, Rule 45 and Rule 1151 2-21 2. Approved Paint Systems Nexa Autocolor – Flexible Substrates Clearcoat • P190-643 HS Clearcoat (flexibilized) Basecoat * P422 line 2K Basecoat P965 line Aquabase Basecoat Sealer P565-357/358 Wet-on-Wet Sealer (flexibilized) P565-3011/3015 Fast HS Wet-on-Wet Sealer (flexibilized) Adhesion Promoter P573-2001 Adhesion Primer for Plastics Clearcoat • P190-643 HS Clearcoat (flexibilized) Basecoat * P422 line 2K Basecoat P965 line Aquabase Basecoat Surfacer P565-693 Hi Dur Rapide (flexibilized) P565-510/511 HS Primer Surfacer (flexibilized) Adhesion Promoter P573-2001 Adhesion Primer for Plastics Clearcoat • P190-643 HS Clearcoat (flexibilized) Basecoat * P422 line 2K Basecoat P965 line Aquabase Basecoat Surfacer ** P110-5000 UV Speedprime Clearcoat •• P190-6530 HS Plus Clearcoat (flexibilized) Basecoat * P422 line 2K Basecoat Sealer P565-3111/3115 HS Wet-on-Wet Sealer (flexibilized) Adhesion Promoter P573-2001 Adhesion Primer for Plastics * To meet GM4901M Specifications, a hardener must be added to the basecoat. ** Spot repair only. • VOC Regulated - National Rule •• VOC Regulated - National Rule and Rule 45 2-22 2. Approved Paint Systems Nexa Autocolor − Flexible Substrates (Cont’d) Clearcoat •• P190-6530 HS Plus Clearcoat (flexibilized) Basecoat * P422 line 2K Basecoat Surfacer P565-5201/5205 HS Plus Primer Surfacer (flexibilized) Adhesion Promoter P573-2001 Adhesion Primer for Plastics Clearcoat •• P190-6530 HS Plus Clearcoat (flexibilized) Basecoat * P422 line 2K Basecoat Surfacer ** P110-5000 UV Speedprime Clearcoat ••• P190-6730 HS Plus Clearcoat (flexibilized) Basecoat * P422 line 2K Basecoat Sealer P565-3111/3115 HS Wet-on-Wet Sealer (flexibilized) Adhesion Promotor P573-2001 Adhesion Primer for Plastics Clearcoat ••• P190-6730 HS Plus Clearcoat (flexibilized) Basecoat * P422 line 2K Basecoat Surfacer P565-5201/5205 HS Plus Primer Surfacer (flexibilized) Adhesion Promotor P573-2001 Adhesion Primer for Plastics Clearcoat ••• P190-6730 HS Plus Clearcoat (flexibilized) Basecoat * P422 line 2K Basecoat Surfacer ** P110-5000 UV Speedprime * To meet GM4901M Specifications, a hardener must be added to the basecoat. ** Spot repair only. •• VOC Regulated - National Rule and Rule 45 ••• VOC Regulated - National Rule, Rule 45 and Rule 2-23 2. Approved Paint Systems PPG Rigid Substrates (Steel and Aluminum) Deltron Systems Clearcoat • DCU2002 High Solids Polyurethane Clear DCU2021 Urethane Clear DCU2035 3.5 VOC Clear DCU2042 Low VOC Speed Clear DCU2055 Clear DCU2082 StratoClear™ DCD35 3.5 VOC Compliant Clear Specialty Coating *** DCU2060 Flexed-Flat Clear Basecoat DBU / DBC * Deltron Basecoat Primer Surfacer # DS1002 UV Cured Primer Surfacer * To meet GM4901 Specifications, DX57 must be added to DBC Basecoat. *** This coating meets the anti-glare safety and elastomeric coating designations. # These primers can be applied directly to aluminum. • VOC Regulated - National Rule 2-24 2. Approved Paint Systems PPG – Rigid Substrates (Steel and Aluminum) Deltron Systems (Cont’d) Clearcoat • DCU2082 StratoClear™ Specialty Coating *** DCU2060 Flexed-Flat Clear Basecoat DBU / DBC * Deltron Basecoat ** Undercoat Primer NPC270 Corrosion Resistant Primer Anti-Corrosion Primer DPX170 Chrome Self-Etching Primer DPX171 Non-Chrome Self-Etching Primer DX1791 Wash Primer Metal/Aluminum Treatments # DX533 Aluminum Cleaner / DX503 Aluminum Conditioner Clearcoat • DCU2002 High Solids Polyurethane Clear DCU2021 Urethane Clear DCU2035 3.5 VOC Clear DCU2042 Low VOC Speed Clear DCU2055 Clear DCU2082 StratoClear™ DCD35 3.5 Compliant Clear Specialty Coating *** D2060 Flexed-Flat Clear Basecoat DBU / DBC * Deltron Basecoat ** Surfacer K36 PRIMA™ Acrylic Urethane Primer Surfacer Anti-Corrosion Primer DPX170 Chrome Self-Etching Primer DPX171 Non-Chrome Self-Etching Primer DX1791 Wash Primer DPLF Non-Sanding Epoxy Primer Metal/Aluminum Treatments # DX533 Aluminum Cleaner / DX503 Aluminum Conditioner * To meet GM4901 Specifications, DX57 must be added to DBC Basecoat. ** NCS1990, Compliant Wet-on-Wet Sealer, may be used prior to topcoating. *** This coating meets the anti-glare safety and elastomeric coating designations. # These primers can be applied directly to aluminum. • VOC Regulated - National Rule 2-25 2. Approved Paint Systems PPG − Rigid Substrates (Steel and Aluminum) Deltron Systems (Cont’d) Clearcoat •• DCU2002 High Solids Polyurethane Clear DCU2021 Urethane Clear DCU2035 3.5 VOC Clear DCU2042 Low VOC Speed Clear DCU2055 Clear DCU2082 StratoClear™ DCD35 3.5 Compliant Clear Specialty Coating *** D2060 Flexed-Flat Clear Basecoat DBU / DBC * Deltron Basecoat Primer Surfacer # DS1002 UV Cured Primer Surfacer Clearcoat •• DCU2002 High Solids Polyurethane Clear DCU2021 Urethane Clear DCU2035 3.5 VOC Clear DCU2042 Low VOC Speed Clear DCU2055 Clear DCU2082 StratoClear™ DCD35 3.5 Compliant Clear Specialty Coating *** DCU2060 Flexed-Flat Clear Basecoat DBU / DBC * Deltron Basecoat ** Undercoat Primer NCP270 Corrosion Resistant Primer Anti-Corrosion Primer DPX170 Chrome Self-Etching Primer DPX171 Non-Chrome Self-Etching Primer DX1791 Wash Primer DPLF Non-Sanding Epoxy Primer Metal/Aluminum Treatments # DX533 Aluminum Cleaner / DX503 Aluminum Conditioner * To meet GM4901 Specifications, D888 must be added to BC Basecoat. ** NCS1990, Compliant Wet-on-Wet Sealer, may be used prior to topcoating. *** This coating meets the anti-glare safety and elastomeric coating designations. # These primers can be applied directly to aluminum. •• VOC Regulated - National Rule and Rule 45 2-26 2. Approved Paint Systems PPG – Rigid Substrates (Steel and Aluminum) Deltron Systems (Cont’d) Clearcoat ••• DCU2010 2.1 Speed Clear DCU2030 3.5 Spot and Panel Clear Specialty Coating *** DCU2060 Flexed-Flat Clear Basecoat DBU / DBC * Deltron Basecoat Primer Surfacer # DS1002 UV Cured Primer Surfacer Clearcoat ••• DCU2010 2.1 Speed Clear Specialty Coating *** DCU2060 Flexed-Flat Clear Basecoat DBU / DBC * Deltron Basecoat ** Undercoat Primer Surfacer NCP280 2.1 VOC Primer Surfacer Anti-Corrosion Prep DPX170 Chrome Self-Etching Primer DPX171 Non-Chrome Self-Etching Primer DX1791 Wash Primer Metal/Aluminum Treatments # DX533 Aluminum Cleaner / DX503 Aluminum Conditioner Clearcoat ••• DCU2030 3.5 Spot and Panel Clear Specialty Coating *** DCU2060 Flexed-Flat Clear Basecoat DBU / DBC * Deltron Basecoat ** Undercoat Primer NCP280 2.1 VOC Primer Surfacer Anti-Corrosion Prep DPX171 Non-Chrome Self-Etching Primer Metal/Aluminum Treatments # DX533 Aluminum Cleaner / DX503 Aluminum Conditioner * To meet GM4901 Specifications, D888 must be added to BC Basecoat. ** NCS1990, Compliant Wet-on-Wet Sealer, may be used prior to topcoating. *** This coating meets the anti-glare safety and elastomeric coating designations. # These primers can be applied directly to aluminum. ••• VOC Regulated - National Rule, Rule 45 and Rule 1151 2-27 2. Approved Paint Systems PPG – Rigid Substrates (Steel and Aluminum) Global Systems Clearcoat • D890 Compliant Clear D893 Low VOC Performance Clear D894 High Solids Clear Specialty Coating *** D8102 Matte Clear Basecoat BC * Basecoat Colour Envirobase Colour **◆ Primer Surfacer # D8080 UV Cured Primer Surfacer Clearcoat • D890 Compliant Clear D893 Low VOC Performance Clear D894 High Solids Clear Specialty Coating *** D8102 Matte Clear Basecoat BC * Basecoat Colour ** Envirobase Colour **◆ Surfacer D839 2K Primer Surfacer DTM Primer Surfacer Anti-Corrosion Primer Metal/Aluminum Treatments # D831 Chrome-Free Wash Primer DTM Primer Surfacer Clearcoat • D8101 Fast Clear Specialty Coating *** D8102 Matte Clear Basecoat BC * Basecoat Colour ** Envirobase Colour **◆ Undercoat Primer D822 Corrosion Resistant Primer D839 2K Primer Surfacer DTM Primer Surfacer Anti-Corrosion Primer Metal/Aluminum Treatments # D831 Chrome-Free Wash Primer DTM Primer Surfacer * To meet GM4901 Specifications, D888 must be added to BC Basecoat. ** D891, Compliant Sealer, may be used prior to topcoating. *** This coating meets the anti-glare safety and elastomeric coating designations. # These primers can be applied directly to aluminum. • VOC Regulated - National Rule ◆ To meet GM4901 Specifications, T588 must be added to Envirobase Colour, Clearcoats are limited to D890 and D894 with Envirobase Colour. 2-28 2. Approved Paint Systems PPG − Rigid Substrates (Steel and Aluminum) Global Systems (Cont’d) Clearcoat ••• D890 Compliant Clear D894 High Solids Clear D8106 2.1 Performance D8107 Stoving Clear Specialty Coating *** D8102 Matte Clear Basecoat BC * Basecoat Colour Envirobase Colour **◆ Primer Surfacer # D8080 UV Cured Primer Surfacer Clearcoat ••• D890 Compliant Clear D894 High Solids Clear D8106 2.1 Performance D8107 Stoving Clear Specialty Coating *** D8102 Matte Clear Basecoat BC * Basecoat Colour ** Envirobase Colour **◆ Undercoat Primer D8002 Ultra High Solids Surfacer Anti-Corrosion Primer # D831 Chrome-Free Wash Primer * To meet GM4901 Specifications, D888 must be added to BC Basecoat. ** D891, Compliant Sealer, may be used prior to topcoating. *** This coating meets the anti-glare safety and elastomeric coating designations. # These primers can be applied directly to aluminum. ••• VOC Regulated - National Rule, Rule 45 and Rule 1151 ◆ To meet GM4901 Specifications, T588 must be added to Envirobase Colour, Clearcoats are limited to D890 and D894 with Envirobase Colour. 2-29 2. Approved Paint Systems PPG – Flexible Substrates Deltron Systems Clearcoat •• DCU2042 Low VOC Speed Clear Specialty Coating *** DCU2060 Flexed-Flat Clear Basecoat DBU / DBC Deltron Basecoat Primer Surfacer DS1002 UV Cured Primer Surfacer Clearcoat •• DCU2042 Low VOC Speed Clear Specialty Coating *** DCU2060 Flexed-Flat Clear Basecoat DBC Deltron Basecoat * Flexible Primer Surfacer K36 PRIMA™ Acrylic Urethane Primer Surfacer reduced with DX814 Universal Flexibilizer SX1056 Flexible 2K Sealer SX1057 Flexible 2K Surfacer Adhesion Promoter SX1050 Plastic Adhesion Promotor Global Systems Clearcoat •• D893 Low VOC Performance Clear Specialty Coating *** D8102 Matte Clear Basecoat BC Basecoat Colour * Primer Surfacer D8080 UV Cured Primer Surfacer Clearcoat •• D893 Low VOC Performance Clear Basecoat BC Basecoat Colour * Flexible Primer Surfacer D839 2K Primer Surfacer reduced with D814 Plasticiser SX1056 Flexible 2K Sealer SX1057 Flexible 2K Surfacer Adhesion Promoter SX1050 Plastic Adhesion Promoter * To meet GM4901 Specifications, a basecoat hardener and universal flexibilizer must be used. *** This coating meets the anti-glare safety and elastomeric coating designations. •• VOC Regulated - National Rule and Rule 2-30 2. Approved Paint Systems Sherwin-Williams Rigid Substrates (Steel and Aluminum) Clearcoat • CC930 ULTRA 7000® Clearcoat CC940 ULTRA 7000® Clearcoat Basecoat * ULTRA 7000® Basecoat w / UH 22, 33, 44, 55, 60, 70, 80 or 904 Sealer S50 Series S60 2K Series P30 SpectraSeal™ Surfacer P30 SpectraPrime™ P47 Color-Prime® Tintable Primer Surfacer Anti-Corrosion Primer # E2G973 Vinyl Wash Etching Primer E2G980 G.B.P.® Etching Filler PE990 Chrome Free Etching Filler * To meet GM4901M Specifications, a hardener must be used in the Basecoat. Add UH Hardeners at a ratio of 2 oz. to a ready-to-spray quart of Ultra 7000® Basecoat. # These primers can be used direct to aluminum. • VOC Regulated - National Rule 2-31 2. Approved Paint Systems Sherwin-Williams – Rigid Substrates (Steel and Aluminum) (Cont’d) Clearcoat •• CC930 ULTRA 7000® Clearcoat CC350 ULTRA 7000® 3.5 VOC Clearcoat Basecoat * ULTRA 7000® Basecoat w / UH 22, 33, 44, 55, 60, 70, 80 or 904 * Sealer S50 Series S60 2K Series Surfacer P47 Color-Prime® Tintable Primer Surfacer P30 SpectraPrime™ Anti-Corrosion Primer # E2G973 Vinyl Wash Etching Primer E2G980 G.B.P.® Etching Filler PE990 Chrome Free Etching Filler Clearcoat ••• CC210 ULTRA 7000® 2.1 VOC Clearcoat Basecoat * ULTRA 7000® Basecoat w / UH 22, 33, 44, 55, 60, 70, 80 or 904 * Sealer P23 UltraShade Sealer™ Surfacer P23 UltraShade Primer™ Anti-Corrosion Primer # PE990 Chrome Free Etching Filler * To meet GM4901M Specifications, a hardener must be used in the Basecoat. Add UH Hardeners at a ratio of 2 oz. to a ready-to-spray quart of Ultra 7000® Basecoat. # These primers can be used direct to aluminum. •• VOC Regulated - National Rule and Rule 45 ••• VOC Regulated - National Rule, Rule 45 and Rule 1151 2-32 2. Approved Paint Systems Sherwin-Williams − Flexible Substrates ULTRA ULTRA ULTRA ULTRA 7000® 7000® 7000® 7000® Clearcoat ••• CC940 CC930 CC350 CC210 Clearcoat Clearcoat 3.5 VOC Clearcoat 2.1 VOC Clearcoat Basecoat * ULTRA 7000® Basecoat w / UH 22, 33, 44, 55, 60, 70, 80 or 904 * Sealer P23 UltraShade Sealer™ P30 SpectraSeal™ S50 Series Surfacer P30 SpectraPrime™ P47 Color-Prime® Tintable Primer Surfacer P23 UltraShade Primer™ Adhesion Promoter UPO7226 Plastic Adhesion Promoter Clear UPO7227 Plastic Adhesion Promoter Dk. Gray S60 2K Series * To meet GM4901M Specifications, a hardener must be used in the Basecoat. Add UH Hardeners at a ratio of 2 oz. to a ready-to-spray quart of ULTRA 7000® Basecoat. ••• VOC Regulated - National Rule, Rule 45 and Rule 1151 2-33 2. Approved Paint Systems Standox Rigid Substrates (Steel and Aluminum) Clearcoat • 2K Clear 20-60 2K MS Clear 2K HS Clear Basecoat * MSB Basecoat Color with 15% 2K Hardener Surfacer 2K Nonstop Primer Filler Anti-Corrosion Primer # Etching Adhesion Primer * Solventborne basecoat requires the addition of hardener per technical recommendations. # Can be used direct to aluminum. • VOC Regulated - National Rule 2-34 2. Approved Paint Systems Standox – Rigid Substrates (Steel and Aluminum) (Cont’d) Clearcoat ••• 2.1 Clear Basecoat * MSB Basecoat Color w/ 15% 2K Hardener or Standohyd® Basecoat Color Surfacer 2.1 Filler Anti-Corrosion Primer # Etching Adhesion Primer Clearcoat • Standox 2K MS Clear 20-60 plus 2K Plasticiser (High Gloss, Non-Textured) Standox 2K MS Clear 20-60 plus 2K Plasticiser plus 2K Texture Additive Coarse – Mix 603 (Textured) Standox 2K MS Clear 20-60 plus 2K Elastic Matt – Mix 005 (Low Gloss, Non-Textured) Basecoat * Standox Basecoat Anti-Chip Primer Standohyd® Stone Chip Primer Primer Standox 2K Nonstop Primer Filler plus 2K Plasticiser * Solventborne basecoat requires the addition of hardener per technical recommendations. # Can be used direct to aluminum. • VOC Regulated - National Rule ••• VOC Regulated - National Rule, Rule 45 and Rule 1151 2-35 2. Approved Paint Systems Standox – Flexible Substrates Clearcoat ••• 2K Clear 20-60 Flexible Additive 2K Plasticiser (for surfacer and clearcoat) Basecoat * MSB Basecoat Color with 15% 2K Hardener Surfacer 2K Nonstop Primer Filler Adhesion Primer Standoflex 1K Plastic Primer Clearcoat • Standox 2K MS Clear 20-60 plus 2K Plasticiser (High Gloss, Non-Textured) Standox 2K MS Clear 20-60 plus 2K Plasticiser plus 2K Texture Additive Coarse – Mix 603 (Textured) Standox 2K MS Clear 20-60 plus 2K Elastic Matt – Mix 005 (Low Gloss, Non-Textured) Basecoat * Standox Basecoat Anti-Chip Primer Standohyd® Stone Chip Primer Primer Standox 2K Nonstop Primer Filler plus 2K Plasticiser Adhesion Promoter Standoflex® Plastic Primer * Solventborne basecoat requires the addition of hardener per technical recommendations. • VOC Regulated - National Rule ••• VOC Regulated - National Rule, Rule 45 and Rule 1151 2-36 2. Approved Paint Systems Spies Hecker Rigid Substrates (Steel and Aluminum) Clearcoat • Permacron® MS Vario Clear Coat 8000 Basecoat * Permacron® Basecoat Series 293/295 Surfacer Permacron® Vario Surfacer 8590 Anti-Corrosion Primer # Priomat® 1:1 Primer 3688 * Important: Hardener must be added to Permacron Basecoat Series 293-295 per technical recommendations. # Can be used direct to aluminum. • VOC Regulated - National Rule 2-37 2. Approved Paint Systems Spies Hecker − Rigid Substrates (Cont’d) Clearcoat • Permasolid® HS Clear Coat 8030 Basecoat * Permacron® Basecoat Series 293/295 Surfacer Permacron® Vario Surfacer 8590 Anti-Corrosion Primer # Priomat® 1:1 Primer 3688 Clearcoat ••• Permacron® 2.1 Clear Coat 8095 Basecoat * Permacron® Basecoat Series 293/295 Surfacer Permacron® 2.1 Surfacer 5155 Anti-Corrosion Primer # Priomat® Wash Primer 4075 Clearcoat ••• Permacron® 2.1 Clear Coat 8095 Basecoat * Permahyd® Basecoat Series 280/285 Surfacer Permacron® 2.1 Surfacer 5155 Anti-Corrosion Primer # Priomat® Wash Primer 4075 Clearcoat • Permacron® MS Vario Clear Coat 8000 plus Permacron® Elastic Additive 9050 (High Gloss, Non-Textured) Permacron® MS Vario Clear Coat 8000 plus Permacron® Elastic Additive 9050 plus Permasolid® Texture Additive TA 101 Coarse (Textured) Basecoat * Permacron® Basecoat Series 293/295 Surfacer Permacron® Vario Surfacer 8590 Anti-Chip Primer Permanal® Stone Chip Protector 7100 Primer Permacron® Vario Surfacer 8590 Gray plus Permacron® Elastic Additive 9050 * Important: Hardener must be added to Permacron Basecoat Series 293-295 per technical recommendations. # Can be used direct to aluminum. • VOC Regulated - National Rule ••• VOC Regulated - National Rule, Rule 45 and Rule 1151 2-38 2. Approved Paint Systems Spies Hecker – Flexible Substrates Clearcoat ••• Permacron® MS Vario Clear Coat 8000 Flexible Additive Permasolid® Elastic Additive 9050 (for surfacer and clearcoat) Basecoat * Permacron® Basecoat Series 293/295 Surfacer Priomat® Vario Surfacer 8590 Primer Priomat® Elastic Primer 3304 Transparent Clearcoat • Permacron® MS Vario Clear Coat 8000 plus Permacron® Elastic Additive 9050 (High Gloss, Non-Textured) Permacron® MS Vario Clear Coat 8000 plus Permacron® Elastic Additive 9050 plus Permasolid® Texture Additive TA 101 Coarse (Textured) Basecoat * Permacron® Basecoat Series 293/295 Surfacer Permacron® Vario Surfacer 8590 Anti-Chip Primer Permanal® Stone Chip Protector 7100 Primer Permacron® Vario Surfacer 8590 Gray plus Permacron® Elastic Additive 9050 Adhesion Promoter Priomat® Elastic Primer 3304 * Important: Hardener must be added to Permacron Basecoat Series 293-295 per technical recommendations. • VOC Regulated - National Rule ••• VOC Regulated - National Rule, Rule 45 and Rule 1151 2-39 NOTES 2-40 2k4PaintCov.ai 9/05/03 4 color process GM Approved Refinish Materials GM4901M-D-2004 OCTOBER 2003 GENERAL MOTORS CORPORATION PRINTED IN USA
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Subject : Modify Date : 2003:10:14 12:23:52-04:00 Create Date : 2003:10:07 11:59:36Z Page Count : 46 Creation Date : 2003:10:07 11:59:36Z Mod Date : 2003:10:14 12:23:52-04:00 Producer : Author : EDS Keywords : Metadata Date : 2003:10:14 12:23:52-04:00 Creator : EDS Title : GM Service Manuals Description : Page Mode : UseOutlines Has XFA : NoEXIF Metadata provided by EXIF.tools