Shure PGX Wireless System Specifications Specification Sheet Pdf Eng Ug

Shure PGX Specification Sheet pdf_eng_pgx_wireless_system_specifications_ug Shure - PGX - Specification Sheet

Shure PGX Specification Sheet pdf_eng_pgx_wireless_system_specifications_ug Shure - PGX - Specification Sheet

User Manual: Shure PGX Specification Sheet Shure - PGX - Specification Sheet

Open the PDF directly: View PDF PDF.
Page Count: 3

DownloadShure PGX Wireless System Specifications Specification Sheet Pdf Eng Ug
Open PDF In BrowserView PDF
PGX Wireless System
Specifications
SHURE PGX WIRELESS
Created for active musicians and presenters who also manage their own sound, Shure PGX Wireless improves your performance and
simplifies your setup.
Innovations such as automatic frequency selection and automatic transmitter setup make wireless quicker and completely worry-free. PGX
systems now feature Shure’s patented Audio Reference Companding, delivering the crystal clear sound quality that pro audio engineers
trust.
PGX gives you 8 systems to choose from and tour-tested wireless for guitars, instruments, and vocal mics — including the legendary
SM58® vocal microphones. It’s the best-sounding, simplest choice in wireless, from the leader in live performance sound.
SYSTEM FEATURES
Auto Frequency Selection
•
Locates a clear channel instantly

Shure’s patented Audio Reference Companding
•
Delivers crystal-clear audio transmission, far superior to
conventional wireless technology

Auto Transmitter Setup
•
Infrared link automatically synchronizes the transmitter
and receiver
RECEIVER FEATURES
•
•

Built-in 1/4” antennas
Microprocessor controlled diversity

•
•

Channel display LED
1/4" and XLR audio outputs

•

2 AA batteries (included) provide 8 hours of continuous
use
100m (300 ft.) operating range

HANDHELD AND BODYPACK TRANSMITTER FEATURES
•
•
•

Choice of Shure handheld microphones
Bodypack works with headworn, lavalier and instrument
microphones and cables
Multi-function LED indicator (power, lockout, mute, low
battery)

•

ARCHITECT’S SPEC
The wireless system shall operate in the UHF band between 524 MHz and 865 MHz, with the specific available frequency range being
dependent on the user’s locale. Effective range of the system, receiver to transmitter, shall be 100 meters (300 ft.), under optimal conditions. Each system shall allow selection of over 90 operating frequencies across 18 MHz of bandwidth in order to avoid RF interference.
Optimal frequencies shall be selected automatically, ensuring that individual systems run at their highest level of performance, and that
multiple systems in simultaneous use do not interfere with one another.
An infrared signal beamed from the receiver shall be used to synchronize the frequency between the transmitter and the receiver. The
process of synchronizing the system shall be simple and instantaneous.
Each transmitter shall be powered by two AA batteries. Transmitters shall have a power on–off/mute switch, as well as multi-function
LED indicator showing locked/unlocked status, mute status, and battery strength. Available transmitters shall include a bodypack for use
with guitars, basses, and other instruments, as well as lavalier, headset or instrument microphones, and a handheld transmitter for vocals.
The bodypack shall include a 3–position switch and the handheld transmitter shall include a 2–position switch to compensate for higheror lower-gain devices. Both transmitters shall feature an easily accessible infrared port for system synchronization.
The receiver shall have a channel display LED. The system shall use diversity technology to improve reception, minimize signal dropouts, and achieve the best possible signal-to-noise ratio. The receiver shall include an audio level meter and an infrared port for system
synchronization.
The system shall be the Shure PGX Wireless.

TL1066 (REV 4)
©2011 Shure Incorporated

PGX WIRELESS SYSTEM SPECIFICATIONS
SPECIFICATIONS
System

Working Range

100m (300 ft.)

Audio Frequency Response

Minimum: 45 Hz
Maximum: 15 kHz

+/– 2 dB

Note: actual range depends on RF signal absorption, reflection, and interference

(Overall system frequency depends on microphone element.)

Total Harmonic Distortion

0.5%, typical

Dynamic Range

>100 dB A-weighted

Operating Temperature Range

–18°C (0°F) to +50°C (+122°F)

Transmitter Audio Polarity

Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone
plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip
of the high impedance 1/4-inch output.

Audio Input Level

-10 dBV maximum at "mic" gain position
+10 dBV maximum at 0dB gain position
+20 dBV maximum at -10dB gain position

Gain Adjustment Range

30 dB

Input Impedance

1 M

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions

108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)

Weight

81 grams (3 oz.) without batteries

Housing

Molded polycarbonate case

Power Requirements

2 “AA” size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

PGX2

Audio Input Level

Handheld
Transmitter

+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position

Gain Adjustment Range

10dB

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions

254 mm x 51 mm dia. (10 x 2 in.)

Ref. +/– 33 kHz deviation, 1 kHz tone

PGX1
Bodypack
Transmitter

PGX1

including SM58 cartridge

PGX

Note: battery characteristics may limit this range

Weight

290 grams (10.2 oz.) without batteries

Housing

Molded PC/ABS handle and battery cup

Power Requirements

2 “AA” size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

PGX4

Dimensions

40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)

Receiver

Weight

327 g (11.5 oz.)

Housing

ABS

Audio Output Level

XLR connector (into 600  load): –19 dBV
1/4 inch connector (into 3000  load): –5 dBV

Output Impedance

XLR connector: 200 
1/4 inch connector: 1k

XLR output

Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio

sync

audio

channel

select

ready

Ref. +/– 33 kHz deviation with 1 kHz tone

Sensitivity

–105 dBm for 12 dB SINAD, typical

Image Rejection

>70 dB, typical

Power Requirements

12–18 Vdc at 150 mA, supplied by external power supply

Frequency Range and Transmitter Output Level

Band
G4
G8
H6
J6
K5E
L5
P6
R1
R14
T1
JB
Q8
Q24

X5

Range

Transmitter output

470.125–493.825 MHz,
494.200–509.825 MHz
524–542 MHz
572–590 MHz
606–630 MHz
644–662 MHz
702–719 MHz
800–820 MHz
794–806 MHz
846–865 MHz
806–810 MHz
740–752 MHz
736–754 MHz
925–932 MHz

30 mW
30 mW
30 mW
30 mW
10 mW
30 mW
30 mW
20 mW
20 mW
10 mW
10 mW
10 mW
30 mW
10 mW
2

PGX WIRELESS SYSTEM SPECIFICATIONS
REPLACEMENT PARTS AND ACCESSORIES
All Systems

SystemSpecific

Optional
Accessories

Microphone Stand Adapter (PGX2)

WA371

Carrying Case

94A8429

AC Adapter (120 VAC, 60 Hz)

PS20

AC Adapter (230 VAC, 50/60 Hz, Europlug)

PS20E

AC Adapter (230 VAC, 50/60 Hz, UK)

PS20UK

AC Adapter (100 VAC, 50/60 Hz)

PS20J

AC Adapter (220 VAC, 50 Hz, China)

PS20CHN

PG58 Head with Grille

RPW108

SM58 Head with Grille (PGX2/SM58)

RPW112

SM86 Head with Grille (PGX2/SM86)

RPW114

BETA 58 Head with Grille (PGX2/BETA 58)

RPW118

Matte Silver Grille (PGX2/SM58)

RK143G

Matte Silver Grille (PGX2/SM86)

RPM266

Matte Silver Grille (PGX2/BETA 58)

RK265G

Belt Clip

44A8030

Black Grille (PGX2/BETA 58)

RK323G

Zipper Bag (PGX1)

26A13

Zipper Bag (PGX2)

26A14

Universal Rack Tray

URT

SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055

3



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : Shure PGX Wireless System Specifications
Creator                         : Shure Incorporated
Create Date                     : 2011:01:07 11:22:33-06:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2011:01:10 10:41:49-06:00
Metadata Date                   : 2011:01:10 10:41:49-06:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:7bc37c62-141a-4298-8249-fd3ce349297e
Instance ID                     : uuid:824bedf8-6056-46a3-859b-230129e26ee8
Page Count                      : 3
Author                          : Shure Incorporated
Warning                         : [Minor] Ignored duplicate Info dictionary
EXIF Metadata provided by EXIF.tools

Navigation menu