Shure PGX Wireless System Specifications Specification Sheet Pdf Eng Ug

Shure PGX Specification Sheet pdf_eng_pgx_wireless_system_specifications_ug Shure - PGX - Specification Sheet

Shure PGX Specification Sheet pdf_eng_pgx_wireless_system_specifications_ug Shure - PGX - Specification Sheet

User Manual: Shure PGX Specification Sheet Shure - PGX - Specification Sheet

Open the PDF directly: View PDF PDF.
Page Count: 3

PGX Wireless System
Specifications
TL1066 (REV 4)
©2011 Shure Incorporated
SHURE PGX WIRELESS
Created for active musicians and presenters who also manage their own sound, Shure PGX Wireless improves your performance and
simplifies your setup.
Innovations such as automatic frequency selection and automatic transmitter setup make wireless quicker and completely worry-free. PGX
systems now feature Shure’s patented Audio Reference Companding, delivering the crystal clear sound quality that pro audio engineers
trust.
PGX gives you 8 systems to choose from and tour-tested wireless for guitars, instruments, and vocal mics — including the legendary
SM58® vocal microphones. It’s the best-sounding, simplest choice in wireless, from the leader in live performance sound.
SYSTEM FEATURES
Auto Frequency Selection
• Locates a clear channel instantly
Auto Transmitter Setup
• Infrared link automatically synchronizes the transmitter
and receiver
Shure’s patented Audio Reference Companding
• Delivers crystal-clear audio transmission, far superior to
conventional wireless technology
RECEIVER FEATURES
• Built-in 1/4” antennas
• Microprocessor controlled diversity
• Channel display LED
• 1/4" and XLR audio outputs
HANDHELD AND BODYPACK TRANSMITTER FEATURES
• Choice of Shure handheld microphones
• Bodypack works with headworn, lavalier and instrument
microphones and cables
• Multi-function LED indicator (power, lockout, mute, low
battery)
• 2 AA batteries (included) provide 8 hours of continuous
use
• 100m (300 ft.) operating range
ARCHITECT’S SPEC
The wireless system shall operate in the UHF band between 524 MHz and 865 MHz, with the specific available frequency range being
dependent on the user’s locale. Effective range of the system, receiver to transmitter, shall be 100 meters (300 ft.), under optimal condi-
tions. Each system shall allow selection of over 90 operating frequencies across 18 MHz of bandwidth in order to avoid RF interference.
Optimal frequencies shall be selected automatically, ensuring that individual systems run at their highest level of performance, and that
multiple systems in simultaneous use do not interfere with one another.
An infrared signal beamed from the receiver shall be used to synchronize the frequency between the transmitter and the receiver. The
process of synchronizing the system shall be simple and instantaneous.
Each transmitter shall be powered by two AA batteries. Transmitters shall have a power on–off/mute switch, as well as multi-function
LED indicator showing locked/unlocked status, mute status, and battery strength. Available transmitters shall include a bodypack for use
with guitars, basses, and other instruments, as well as lavalier, headset or instrument microphones, and a handheld transmitter for vocals.
The bodypack shall include a 3–position switch and the handheld transmitter shall include a 2–position switch to compensate for higher-
or lower-gain devices. Both transmitters shall feature an easily accessible infrared port for system synchronization.
The receiver shall have a channel display LED. The system shall use diversity technology to improve reception, minimize signal drop-
outs, and achieve the best possible signal-to-noise ratio. The receiver shall include an audio level meter and an infrared port for system
synchronization.
The system shall be the Shure PGX Wireless.
2
PGX WIRELESS SYSTEM SPECIFICATIONS
SPECIFICATIONS
Frequency Range and Transmitter Output Level
System Working Range 100m (300 ft.)
Note: actual range depends on RF signal absorption, reflection, and interference
Audio Frequency Response
+/– 2 dB
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone element.)
Total Harmonic Distortion
Ref. +/– 33 kHz deviation, 1 kHz tone
0.5%, typical
Dynamic Range >100 dB A-weighted
Operating Temperature Range –18°C (0°F) to +50°C (+122°F)
Note: battery characteristics may limit this range
Transmitter Audio Polarity Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone
plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip
of the high impedance 1/4-inch output.
PGX1
Bodypack
Transmitter
Audio Input Level -10 dBV maximum at "mic" gain position
+10 dBV maximum at 0dB gain position
+20 dBV maximum at -10dB gain position
Gain Adjustment Range 30 dB
Input Impedance 1M
RF Transmitter Output 30 mW maximum (dependent on applicable country regulations)
Dimensions 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight 81 grams (3 oz.) without batteries
Housing Molded polycarbonate case
Power Requirements 2 “AA” size alkaline or rechargeable batteries
Battery Life >8 hours (alkaline)
PGX1
PGX2
Handheld
Transmitter
Audio Input Level +2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position
Gain Adjustment Range 10dB
RF Transmitter Output 30 mW maximum (dependent on applicable country regulations)
Dimensions
including SM58 cartridge
254 mm x 51 mm dia. (10 x 2 in.)
Weight 290 grams (10.2 oz.) without batteries
Housing Molded PC/ABS handle and battery cup
Power Requirements 2 “AA” size alkaline or rechargeable batteries
Battery Life >8 hours (alkaline)
PGX
PGX4
Receiver
Dimensions 40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
Weight 327 g (11.5 oz.)
Housing ABS
Audio Output Level
Ref. +/– 33 kHz deviation with 1 kHz tone
XLR connector (into 600 load): –19 dBV
1/4 inch connector (into 3000 load): –5 dBV
Output Impedance XLR connector: 200
1/4 inch connector: 1k
XLR output Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Sensitivity –105 dBm for 12 dB SINAD, typical
Image Rejection >70 dB, typical
Power Requirements 12–18 Vdc at 150 mA, supplied by external power supply
sync
readyaudio channel select
Band Range Transmitter output
G4 470.125–493.825 MHz, 30 mW
G8 494.200–509.825 MHz 30 mW
H6 524–542 MHz 30 mW
J6 572–590 MHz 30 mW
K5E 606–630 MHz 10 mW
L5 644–662 MHz 30 mW
P6 702–719 MHz 30 mW
R1 800–820 MHz 20 mW
R14 794–806 MHz 20 mW
T1 846–865 MHz 10 mW
JB 806–810 MHz 10 mW
Q8 740–752 MHz 10 mW
Q24 736–754 MHz 30 mW
X5 925–932 MHz 10 mW
3
PGX WIRELESS SYSTEM SPECIFICATIONS
REPLACEMENT PARTS AND ACCESSORIES
All Systems Microphone Stand Adapter (PGX2) WA371
Carrying Case 94A8429
System-
Specific
AC Adapter (120 VAC, 60 Hz) PS20
AC Adapter (230 VAC, 50/60 Hz, Europlug) PS20E
AC Adapter (230 VAC, 50/60 Hz, UK) PS20UK
AC Adapter (100 VAC, 50/60 Hz) PS20J
AC Adapter (220 VAC, 50 Hz, China) PS20CHN
PG58 Head with Grille RPW108
SM58 Head with Grille (PGX2/SM58) RPW112
SM86 Head with Grille (PGX2/SM86) RPW114
BETA 58 Head with Grille (PGX2/BETA 58) RPW118
Matte Silver Grille (PGX2/SM58) RK143G
Matte Silver Grille (PGX2/SM86) RPM266
Matte Silver Grille (PGX2/BETA 58) RK265G
Belt Clip 44A8030
Optional
Accessories
Black Grille (PGX2/BETA 58) RK323G
Zipper Bag (PGX1) 26A13
Zipper Bag (PGX2) 26A14
Universal Rack Tray URT
SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055

Navigation menu