Picocell Gateway User Guide

• 1 Introduction
• 2 Hardware Presentation
  • 2.1 Absolute Maximum Ratings
  • 2.2 External Host Processor Connection
  • 2.3 RF Front-End Architecture
  • 2.4 PicoCell Gateway Block Diagram
  • 2.5 Hardware Control Signals
  • 2.6 Power Consumption
• 3 Software Overview
• 4 Use with Raspberry Pi
  • 4.1 Raspberry Pi Connection
  • 4.2 Raspberry Pi Image Software Installation
  • 4.3 Starting Raspberry Pi
    • 4.3.1 Login: pi and Password: raspberry
    • 4.3.2 Resize Partition / FS
    • 4.3.3 Install dfu-util Tool
    • 4.3.4 Load STM32F401CD MCU Binary
    • 4.3.5 Compile Semtech HAL + Packet Forwarder
    • 4.3.6 Semtech HAL Compilation Check
    • 4.3.7 Set a Unique ID to the Gateway
    • 4.3.8 Run Basic Packet Forwarder
• 5 JSON file for RF Parameter Tuning
• 6 References
• 7 Revision History
• 8 Glossary