Psu Manual

• Acknowledgments
• Motivation
• Safety Notice (Grounding)
• Usage Instructions
  • Setting the output voltage
  • Setting the current limit
  • Indicator LEDs
  • Monitoring the output current
  • Monitoring the internal temperature
  • Disabling the internal load
  • Calibrating the current limit
  • Calibrating the output error indicator
• Principles of Operation
  • The LT3081 linear regulator
  • The internal load
  • The Hot indicator circuit
  • The Vout error indicator circuit
• Schematic Diagram
• Printed Circuit Board Layers
  • Front Copper
  • Back Copper
  • Front Solder Mask
  • Back Solder Mask
  • Front Silk Screen
  • Front Fabrication
  • Plated Through-Hole Drill Map
  • Non-Plated Through-Hole Drill Map
  • User Comments
  • Edge Cuts (Board Outline)